--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/releasing/makecbr/test/unit_CConfig.pm Wed Jun 30 11:35:58 2010 +0800
@@ -0,0 +1,236 @@
+#!bin\perl
+# Copyright (c) 2003-2009 Nokia Corporation and/or its subsidiary(-ies).
+# All rights reserved.
+# This component and the accompanying materials are made available
+# under the terms of the License "Eclipse Public License v1.0"
+# which accompanies this distribution, and is available
+# at the URL "http://www.eclipse.org/legal/epl-v10.html".
+#
+# Initial Contributors:
+# Nokia Corporation - initial contribution.
+#
+# Contributors:
+#
+# Description:
+# Unit test for CConfig
+#
+#
+
+package unit_CConfig;
+
+use lib qw(../);
+use lib qw(../stages);
+use FindBin;
+use Cwd;
+use lib $FindBin::Bin."\\..";
+use CConfig;
+use CTestScore;
+
+sub RunTest($)
+ {
+ my ($testscore) = @_;
+
+ print "> *** Testing CConfig ***\n";
+
+ if (!defined($testscore))
+ {
+ $testscore = New CTestScore();
+ }
+
+ if (!defined($ENV{TEMP}))
+ {
+ print STDOUT "TEMP environment variable must be defined before testing of CConfig is run.\n";
+ return $testscore;
+ }
+
+ my $testFilename = $ENV{TEMP}."\\CConfig.tst";
+
+ if (-e $testFilename)
+ {
+ print STDOUT "File '$testFilename' already exists.\nPlease delete this file to enable testing of CConfig.\n";
+ return $testscore;
+ }
+
+ open(TESTFILE,">$testFilename");
+ print TESTFILE "Key:value\n";
+ close(TESTFILE);
+
+ my $testConfig=New CConfig($testFilename);
+
+ $testscore->Test($testConfig->Get("Key") eq "value", "Loaded in file");
+ $testscore->Test($testConfig->Get("kEy") eq "value", "Tested key case insensitivity");
+ $testscore->Test($testConfig->Set("key:2", "value2"), "Set extra key");
+ $testscore->Test( ($testConfig->Get("Key") eq "value") && ($testConfig->Get("key:2") eq "value2"), "Returned all key values");
+ $testscore->Test(!defined($testConfig->Get("nokey")), "Getting invalid key is undefined");
+ $testscore->Test($testConfig->Set("key3", ["value3","value4"]), "Set list value");
+ my $listref=$testConfig->Get("key3");
+ $testscore->Test( (ref($listref) eq "ARRAY") && (($listref->[0]) eq "value3") && (($listref->[1]) eq "value4"), "Returned list value");
+ $testscore->Test($testConfig->Save($testFilename), "Saved file");
+ $testConfig->Set("key4", "value5");
+ $testscore->Test($testConfig->Reload($testFilename), "Loaded file");
+ $listref=$testConfig->Get("key3");
+ $testscore->Test( ($testConfig->Get("Key") eq "value") && ($testConfig->Get("key:2") eq "value2") && (ref($listref) eq "ARRAY") && (($listref->[0]) eq "value3") && (($listref->[1]) eq "value4") && (!defined( $testConfig->Get("key4") )), "Returned all key values");
+ $testscore->Test(!($testConfig->Set(undef, "val")), "Can't set undefined key");
+ $testscore->Test(!($testConfig->Set("key5", undef)), "Can't set undefined value");
+ $testscore->Test($testConfig->Set("key6", ""), "Can set empty value");
+ $testscore->Test($testConfig->Set("", "val"), "Can set empty key");
+ $testscore->Test(!($testConfig->Set("key7", {"hashkey"=>"hashval"})), "Can't set hash value");
+
+ # Support for additional behaviour to handle Error message, scanlog format etc.
+ my $logFilename = "CConfig_scanlog.log";
+ TestConfigStatus($testConfig, $testscore);
+ TestLogFile($testFilename, $logFilename, $testscore);
+ ValidateLogFile($logFilename, $testscore);
+ unlink $logFilename;
+ TestDieConditions($testFilename, $testscore);
+ unlink $testFilename;
+
+ return $testscore;
+ }
+
+sub TestConfigStatus($$)
+ {
+ my $testConfig = shift;
+ my $testScore = shift;
+ # First check the initial internal state of CConfig
+ $testScore->Test($testConfig->{iPhaseErrorCount} == 0, "Initial error count is zero");
+ $testScore->Test(!defined ($testConfig->{iPhase}), "Initial undefined initial phase");
+ }
+
+# This writes out a log file
+sub TestLogFile($$)
+ {
+ my $testFilename = shift;
+ my $logFilename = shift;
+ my $testScore = shift;
+ my $testConfig = New CConfig($testFilename);
+ # This puts a logfile in the current working directory
+ # i.e. test/CConfig.log
+ #my $logFilename = "CConfig_scanlog.log";
+ $testConfig->SetLog($logFilename);
+ #$testConfig->Command("Command");
+ $testConfig->PhaseStart("Phase_1");
+ $testScore->Test($testConfig->{iPhase} eq "Phase_1", "Phase_1 defined");
+ $testConfig->Component("Component_1");
+ $testConfig->Error("Phase_1 error message");
+ $testConfig->Warning("Phase_1 warning message");
+ my $phaseErrors = $testConfig->PhaseEnd();
+ $testScore->Test($phaseErrors == 1, "Phase_1 reported 1 error");
+ $testConfig->PhaseStart("Phase_2");
+ $testConfig->Warning("Phase_2 warning message");
+ $testConfig->Print("Opening Phase_3 should finish Phase_2");
+ $testConfig->PhaseStart("Phase_3");
+ $testScore->Test(1, "Phase switching didn't die");
+ $phaseErrors = $testConfig->PhaseEnd();
+ $testScore->Test($phaseErrors == 0, "Phase_3 reported no errors");
+ #my $logPath = cwd()."/".$logFilename;
+ #print "> *** Please check CConfig log file at $logPath ***\n";
+ $testScore->Test(1, "Logfile \"$logFilename\" written");
+ }
+
+sub ValidateLogFile($$)
+ {
+ # This is the expected log file output - without the date/time stamp
+ my $logFilename = shift;
+ my $testScore = shift;
+ my $logFileExpected = "===-------------------------------------------------
+=== Phase_1
+===-------------------------------------------------
+=== Phase_1 started
+=== Phase_1 == Component_1
+ERROR: Phase_1 error message
+WARNING: Phase_1 warning message
+=== Phase_1 finished
+===-------------------------------------------------
+=== Phase_2
+===-------------------------------------------------
+=== Phase_2 started
+WARNING: Phase_2 warning message
+Opening Phase_3 should finish Phase_2
+=== Phase_2 finished
+===-------------------------------------------------
+=== Phase_3
+===-------------------------------------------------
+=== Phase_3 started
+=== Phase_3 finished
+";
+ $testScore->Test($logFileExpected eq ReadTimelessLogFile($logFilename), "Logfile \"$logFilename\" matches");
+ }
+
+# Read a scanlog file and strip the time/date stamp
+sub ReadTimelessLogFile($)
+ {
+ my $filename = shift;
+ my $retVal;
+ open(LOGFILE,"$filename");
+ while (defined (my $line = <LOGFILE>))
+ {
+ if ($line =~ m/.+started .+/)
+ {
+ $line =~ s/(.+started ).+/$1/;
+ }
+ elsif ($line =~ m/.+finished .+/)
+ {
+ $line =~ s/(.+finished ).+/$1/;
+ }
+ $retVal .= $line;
+ }
+ #print "\nParsed:\n";
+ #print $retVal;
+ return $retVal;
+ }
+
+sub TestDieConditions($$)
+ {
+ my $testFilename = shift;
+ my $testScore = shift;
+ my $testConfig;
+ my $logFilename = "CConfig_scrap.log";
+ # Try a direct Die() call
+ $testConfig = New CConfig($testFilename);
+ eval
+ {
+ $testConfig->Die("Die message.");
+ };
+ if ($@) {
+ $testScore->Test(1, "Died on Die() command");
+ } else {
+ $testScore->Test(0, "Failed to die on Die() command");
+ }
+ # Try setting SetErrorDie() then calling Error()
+ $testConfig = New CConfig($testFilename);
+ $testConfig->SetLog($logFilename);
+ # Try PhaseEnd() before any PhaseStart() has been called
+ $testConfig = New CConfig($testFilename);
+ $testConfig->SetLog($logFilename);
+ eval
+ {
+ # No PhaseStart() has been made so a PhaseEnd() should fail
+ $testConfig->PhaseEnd();
+ };
+ if ($@) {
+ $testScore->Test(1, "Died on PhaseEnd() command when there was no prior PhaseStart()");
+ } else {
+ $testScore->Test(0, "Failed to die on PhaseEnd() command");
+ }
+ # Try setting provoking PhaseEnd() when phase has errors
+ $testConfig = New CConfig($testFilename);
+ $testConfig->SetLog($logFilename);
+ $testConfig->PhaseStart("Error_Phase_1");
+ $testConfig->Error("Error message.");
+ eval
+ {
+ # Here is the killer line that should cause it to fail.
+ # Phase 1 has an error but the phase has not been collected
+ # before starting False_Phase_2
+ $testConfig->PhaseStart("False_phase_2");
+ };
+ if ($@) {
+ $testScore->Test(1, "Died on PhaseStart() command when previous phase had Error() calls");
+ } else {
+ $testScore->Test(0, "Failed to die on Error() command");
+ }
+ unlink $logFilename;
+ }
+
+1;