--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/buildframework/helium/tools/quality/compatibility_analyser/ca_config_template.txt	Fri Aug 13 14:59:05 2010 +0300
@@ -0,0 +1,164 @@
+#
+# Copyright (c) 2008, 2009 Nokia Corporation and/or its subsidiary(-ies).
+# All rights reserved.
+# This component and the accompanying materials are made available
+# under the terms of the License "Eclipse Public License v1.0"
+# which accompanies this distribution, and is available
+# at the URL "http://www.eclipse.org/legal/epl-v10.html".
+#
+# Initial Contributors:
+# Nokia Corporation - initial contribution.
+#
+# Contributors:
+#
+# Description:  End-user Interface for Core Tools execution
+#
+
+########## GUIDELINES 
+# 
+# - If any paths contain spaces, place them in "Quotes"
+# - If some parameter is not to be used, it can be empty or completely removed
+#   from the config file
+
+
+########## MANDATORY COMMON PARAMETERS 
+#
+# Name for baseline file set
+BASELINE_NAME='SDK 3rd Edition'
+
+# Root directory for files in baseline directory. It's a mandatory parameter.
+BASELINE_SDK_DIR=C:\Symbian\9.2\S60_3rd_FP1_2
+
+# S60 version of baseline set.It can be any of the following
+# 3.0, 3.1, 3.2, 5.0, 9.1, 9.2,,10.1, S^1, S^2,S^3,S^4 (S^1, S^2,S^3,S^4 are for symbian 1,2,3,4 SDk versions respectively).
+BASELINE_SDK_S60_VERSION=3.0
+
+# Name for current file set
+CURRENT_NAME=RnD SDK wk26
+
+# Root directory for files in current directory. It's a mandatory parameter.
+CURRENT_SDK_DIR=Y:\
+
+# S60 version of current set.It can be any of the following
+# 3.0, 3.1, 3.2, 5.0, 9.1, 9.2,,10.1, S^1, S^2,S^3,S^4 (S^1, S^2,S^3,S^4 are for symbian 1,2,3,4 SDk versions respectively).
+CURRENT_SDK_S60_VERSION=3.1
+
+
+########## OPTIONAL COMMON PARAMETERS 
+#
+# Defines the path for intermediate temporary files
+# Uses system defined paths if empty
+TEMP=
+
+
+########## OPTIONAL HEADER ANALYSIS SPECIFIC PARAMETERS 
+
+# Mark as 'true', if Public vs Rnd sdk or small no of headers ( count < 3000) analysis will be done.
+# defaults to 'false' if not defined. Analysis time will be increased.
+# When analysing large no of headers, multiple Thread logic needs to be disabled to avoid issues due to high memory consumption .
+USE_THREAD=
+
+# Analyse any header directory, other than \epoc32\include. This will override
+# the default SDK paths. Multiple names separated by ‘;’ can be input. If they 
+# are relative paths, BASELINE_SDK_DIR\epoc32\include and 
+# CURRENT_SDK_DIR\epoc32\include will be inserted at the begining.
+BASELINE_HEADERS=
+CURRENT_HEADERS=
+
+# Specifies the dependant header directories. Multiple names separated by ‘;’
+# can be input. If defined or not, default system defined inputs will be taken
+# along with these always. If they are relative paths, 
+# BASELINE_SDK_DIR\epoc32\include and CURRENT_SDK_DIR\epoc32\include will be 
+# inserted at the begining.
+BASELINE_SYSTEMINCLUDEDIR=
+CURRENT_SYSTEMINCLUDEDIR=
+
+# Additional headers that have to be included for successful compilation of the
+# header files. Multiple names separated by ‘;’ can be input.
+BASELINE_FORCED_HEADERS=
+CURRENT_FORCED_HEADERS=
+
+# Usage of platform data to resolve compile time dependency information,
+# defaults to 'true' if not defined
+USE_PLATFORM_DATA=
+
+# Recurse the directory hierarchy while scanning for files under verification,
+# defaults to 'true' if not defined
+RECURSIVE_HEADERS=
+
+# If the recursive scan is enabled, optionally exclude some subdirectories,
+# defaults to be none if not defined. Multiple names separated by ‘;’ can 
+# be input.
+EXCLUDE_DIR_HEADERS=
+
+# File pairs to be compared, if names change between base & current releases,
+# Format, OLD:NEW, each such set is separated by ‘;’, defaults to none
+REPLACE_HEADERS=
+
+# Report file for header analysis, report file created under reports directory
+# with a default file name if not specified
+REPORT_FILE_HEADERS=Y:/output/logs/BC/headers_report.xml
+
+# Similar as above, but this is the path of the filtered report file, otherwise
+# the same file name is used
+FILTER_FILE_HEADERS=
+
+
+########## OPTIONAL LIBRARY ANALYSIS SPECIFIC PARAMETERS 
+#
+# Type of the tool chain (GCC/GGCE/RVCT) which is used fetch information from the
+# import libraries under analysis, defaults to GCCE if not specified
+TOOLCHAIN=
+
+# Path to the tool chain mentioned above, path found automatically if not specified
+TOOLCHAIN_PATH=
+
+# Target build directories of the import libraries (eg ARMV5/ARMV6). Defaults to
+# ARMV5. Please note that WINSCW is not supported. Multiple names separated by 
+# ‘;’ can be input.
+BASELINE_BUILDTARGET=
+CURRENT_BUILDTARGET=
+
+# Analyse any other import library directory than from under \epoc32\release.
+# This will override target builds mentioned above. Multiple names separated 
+# by ‘;’ can be input. If they are relative paths, 
+# BASELINE_SDK_DIR\epoc32\release and CURRENT_SDK_DIR\epoc32\release will be 
+# inserted at the begining. If any of these param is mentioned, corresponding 
+# dll path also needs to be mentioned.
+BASELINE_IMPORTLIBRARIES=
+CURRENT_IMPORTLIBRARIES=
+
+# Analyse any other dll directory than from under \epoc32\release. This will 
+# override target builds mentioned above. Multiple names separated by ‘;’ can
+# be input. If they are relative paths, BASELINE_SDK_DIR\epoc32\release and 
+# CURRENT_SDK_DIR\epoc32\release will be inserted at the begining. If any of 
+# these param is mentioned,corresponding lib path is also needs to be mentioned.
+BASELINE_IMPORTDLLS=
+CURRENT_IMPORTDLLS=
+
+# Report file for library analysis, report file created under reports directory
+# with a default file name if not specified
+REPORT_FILE_LIBRARIES=Y:/output/logs/BC/libraries_report.xml
+
+# Similar as above, but this is the path of the filtered report file, otherwise
+# the same file name is used
+FILTER_FILE_LIBRARIES=
+
+
+########## OPTIONAL REPORT FILTERING SPECIFIC PARAMETERS
+#
+# Report files to be filtered, multiple reports can be mentioned here separated
+# by ';'. In addition, peport paths mentioned in headers, libraries section are
+# also filtered
+REPORT_FILE_FILTER=
+
+# Same as above, but specifies paths for filtered report files. There is a
+# correspondance between report file above and the output file. If a report
+# file does not have a corresponding Output file mentioned then it is filtered
+# in-place.
+OUTPUT_FILE_FILTER=
+
+# Defines paths for knownissues files separated by ';' which can be either local
+# directory or a server path. Defaults to the default knownissues file
+# delivered by the tool
+ISSUES_FILE=