<?xml version="1.0" encoding="UTF-8"?>
<!-- 
============================================================================ 
Name        : coverity.ant.xml 
Part of     : Helium 

Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
All rights reserved.
This component and the accompanying materials are made available
under the terms of the License "Eclipse Public License v1.0"
which accompanies this distribution, and is available
at the URL "http://www.eclipse.org/legal/epl-v10.html".

Initial Contributors:
Nokia Corporation - initial contribution.

Contributors:

Description:

============================================================================
-->
<project name="compile.coverity" xmlns:hlm="http://www.nokia.com/helium">
    <description>
        code-coverity measure.
    </description>
    
    <!-- Coverity property declaration and types defination-->
    <!-- coverity output directory location
    @type string
    @scope private
    -->
    <property name="coverity.output.dir" location="${build.output.dir}/coverity"/>
    <!-- coverity log directory location
    @type string
    @scope private
    -->
    <property name="coverity.log.dir" location="${build.log.dir}/coverity"/>
    <!-- coverity link directory location
    @type string
    @scope private
    -->
    <property name="coverity.link.dir" value="${coverity.output.dir}/coveritylink"/>
    <!-- coverity config directory location
    @type string
    @scope private
    -->
    <property name="coverity.config.dir" value="${coverity.output.dir}/config"/>
    <!-- coverity analyze directory location
    @type string
    @scope private
    -->
    <property name="coverity.analyze.dir" value="${coverity.link.dir}/analyze"/>
    <!-- coverity intermidiate directory location
    @type string
    @scope private
    -->
    <property name="coverity.inter.dir" value="${coverity.output.dir}/intermidiate"/>
    <!-- coverity report directory location
    @type string
    @scope private
    -->
    <property name="coverity.report.dir" value="${coverity.output.dir}/coverity_report_${build.id}"/>
    <!-- coverity report file name
    @type string
    @scope private
    -->
    <property name="coverity.report.file" value="${build.id}_coverity_build_report.html"/>
    <!-- coverity summary XML file name
    @type string
    @scope private
    -->
    <property name="coverity.summary.xml.file" value="${temp.build.dir}/${build.id}_coverity_build_summary.xml"/>
    <!-- coverity checkers XML file name
    @type string
    @scope private
    -->
    <property name="coverity.checkers.xml.file" value="${temp.build.dir}/${build.id}_coverity_build_checkers.xml"/>
    <!-- diamonds coverity report file name
    @type string
    @scope private
    -->
    <property name="diamonds.coverity.report.file" value="${temp.build.dir}/${build.id}_coverity_build_report.xml"/>
    
    <if>
        <isset property="env.NUMBER_OF_PROCESSORS"/>
        <then>
            <math result="coverity.no.thread" operand1="${env.NUMBER_OF_PROCESSORS}" operation="*" operand2="2" datatype="int"/>
        </then>
        <else>
            <!-- Number of parallel coverity emit threads can run.
            @type string
            @scope private
            -->
            <property name="coverity.no.thread" value="2"/>
        </else>
    </if>
    
    <!-- set property if coverity is enabled -->
    <condition property="run.coverity">
        <istrue value="${enabled.coverity}" />
    </condition>
    
    <!-- cov-build command options -->
    <hlm:coverityoptions id="coverity.build.options">
        <arg name="--config" value="${coverity.config.dir}/coverity_config.xml"/>
        <arg name="--dir" value="${coverity.inter.dir}"/>
        <arg name="--auto-diff" value=""/>
        <arg name="--preprocess-first" value=""/>
        <arg name="--record-only" value=""/>
    </hlm:coverityoptions>
    
    <!-- cov-build emit command options -->
    <hlm:coverityoptions id="coverity.emit.options">
        <arg name="--config" value="${coverity.config.dir}/coverity_config.xml"/>
        <arg name="--dir" value="${coverity.inter.dir}"/>
        <arg name="--replay" value=""/>
        <arg name="--replay-processes" value="${coverity.no.thread}"/>
    </hlm:coverityoptions>
    
    <!-- cov-config command options -->
    <hlm:coverityoptions id="coverity.config.options">
        <hlm:arg name="--config" value="${coverity.config.dir}/coverity_config.xml"/>
        <hlm:arg name="--template" value=""/>
        <hlm:arg name="--comptype" value="armcc"/>
        <hlm:arg name="--compiler" value="armcc.exe"/>
    </hlm:coverityoptions>
    
    <!-- cov-analyze command options -->
    <hlm:coverityoptions id="coverity.analyze.options">
        <hlm:arg name="--dir" value="${coverity.analyze.dir}"/>
        <hlm:arg name="--all" value=""/>
        <hlm:arg name="--symbian" value=""/>
        <hlm:arg name="--append" value=""/>
        <hlm:arg name="--enable-callgraph-metrics" value=""/>
    </hlm:coverityoptions>

    <!-- To run post coverity steps -->
    <target name="post-coverity" if="run.coverity">
        
        <!-- To emit the file into defect database -->
        <antcall target="run-coverity-emit"/>
        
        <!-- To analyze the sources file -->
        <antcall target="run-coverity-analyze"/>
        
        <!-- To generate the HTML error pages -->
        <antcall target="gen-coverity-report"/>
    
    </target>
    
    <!-- Run coverity configure if the enabled.coverity is set to true -->
    <target name="run-coverity-configure" if="run.coverity">
    
        <hlm:coverity command="cov-configure" dir="${build.drive}/">
            <hlm:coverityoptions refid="coverity.config.options"/>
        </hlm:coverity >
        
    </target>
    
    <!-- Run coverity build with emit options if the enabled.coverity is set to true 
     re-running the cov-build with replay option will reduce the build time by ~ 20% 
    -->
    <target name="run-coverity-emit" >
        
        <hlm:coverity command="cov-build" dir="${build.drive}/">
            <hlm:coverityoptions refid="coverity.emit.options"/>
        </hlm:coverity >
        
    </target>
    
    <!-- Run coverity-analyze if the enabled.coverity is set to true 
     Sometimes the same file is compiled several times with different command-line options. 
     Due to the inherent difficulty of tracking linkage information, the cov-analyze command cannot automatically determine which files are linked together. 
     To avoid errors in function call resolution (especially in C code, which doesn't have any name mangling), use the cov-link command to get this information. 
     
     and also
     
     working with link files is faster than collecting data from the intermediate directory multiple times
     
     So run the cov-link commands and analyze the database using cov-analyze command.
    
    -->
    <target name="run-coverity-analyze" >
        
        <mkdir dir="${coverity.link.dir}"/>
        
        <hlm:coverity command="cov-link" dir="${build.drive}/">
            <hlm:arg name="--dir" value="${coverity.inter.dir}"/>
            <hlm:arg name="--collect" value=""/>
            <hlm:arg name="-of" value="${coverity.link.dir}/all.link"/>
        </hlm:coverity >
                
        <hlm:coverity command="cov-link" dir="${build.drive}/">
            <hlm:arg name="--dir" value="${coverity.inter.dir}"/>
            <hlm:arg name="--compile-arg" value="armv5"/>
            <hlm:arg name="-of" value="${coverity.link.dir}/armv5.link"/>
            <hlm:arg name="${coverity.link.dir}/all.link" value=""/>
        </hlm:coverity >
             
        <hlm:coverity command="cov-link" dir="${build.drive}/">
            <hlm:arg name="--dir" value="${coverity.inter.dir}"/>
            <hlm:arg name="--output-dir" value="${coverity.analyze.dir}"/>
            <hlm:arg name="${coverity.link.dir}/armv5.link" value=""/>
        </hlm:coverity >
                
        <hlm:coverity command="cov-analyze" dir="${build.drive}/">
            <hlm:coverityoptions refid="coverity.analyze.options"/>
        </hlm:coverity >
        
    </target>
    
    
    <!-- Generate coverity report -->
    <target name="gen-coverity-report">
        
        <!-- Read the summary file generated by cov-analyze and generate html file -->
        <fmpp sourceFile="${helium.dir}/tools/common/templates/coverity/coverity.summary.html.ftl"
              outputFile="${temp.build.dir}/${build.id}_coverity_build_summary.html">
            <data   expandProperties="yes">
                    ant: antProperties()
                    covsummary: slicedText (${coverity.analyze.dir}/c/output/summary.txt)
            </data>
        </fmpp>
        
        <!-- To generate summary file for diamonds -->
        <fmpp sourceFile="${helium.dir}/tools/common/templates/coverity/coverity.summary.xml.ftl"
              outputFile="${coverity.summary.xml.file}">
            <data   expandProperties="yes">
                    ant: antProperties()
                    covsummary: slicedText (${coverity.analyze.dir}/c/output/summary.txt)
            </data>
        </fmpp>
        
        <!-- Run this to get the static html pages -->
        <hlm:coverity command="cov-format-errors" dir="${build.drive}/">
            <hlm:arg name="--dir" value="${coverity.analyze.dir}"/>
            <hlm:arg name="--filesort" value=""/>
            <hlm:arg name="--functionsort" value=""/>
        </hlm:coverity >
        
        <!-- Copy the summary file to resolve the xml load error -->
        <copy file="${coverity.analyze.dir}/c/output/errors/summary.xml" tofile="${coverity.checkers.xml.file}" overwrite="true" failonerror="false">
            <filterchain>
                <linecontains negate="true">
                    <contains value="config.dtd"/>
                </linecontains>
            </filterchain>
        </copy>
        
        <!-- Insert summary tags into checkers file -->
        <xmltask source="${coverity.checkers.xml.file}"  dest="${diamonds.coverity.report.file}" report="false">
            <insert path="/coverity" file="${coverity.summary.xml.file}"/> 
        </xmltask>
        
        <!-- collect all the html files into folder -->        
        <copy todir="${coverity.report.dir}" overwrite="true" failonerror="false">
            <fileset dir="${coverity.analyze.dir}/c/output/errors">
                <exclude name="index.html"/>
                <exclude name="**/*.xml"/>
                <exclude name="summary.html"/>
            </fileset>
        </copy>
        
        <!-- Concatinate all the html pages to get the final error report page -->
        <concat destfile="${coverity.report.dir}/${coverity.report.file}">
            <fileset dir="${temp.build.dir}" includes="${build.id}_coverity_build_summary.html"/>
            <fileset dir="${coverity.analyze.dir}/c/output/errors" includes="index.html"/>
        </concat>
        
    </target>
    
    
    <!-- To get the SBS variable value -->
    <macrodef name="getSBSVariableValue" uri="http://www.nokia.com/helium">
        <attribute name="variablename"/>
        <attribute name="outputvar"/>
        <attribute name="sbsinput"/>
        <sequential>
            <var name="output.var" unset="true"/>
            <hlm:getVariableValue name="@{variablename}" property="output.var">
                <hlm:sbsinput refid="@{sbsinput}" />
            </hlm:getVariableValue>
            <if>
                <and>
                    <isset property="output.var"/>
                    <matches string="${output.var}" pattern="arm.*"/>
                </and>
                <then>
                    <antcall target="set-arm-version"/>
                </then>
            </if>
            <script language="beanshell"> <![CDATA[
                curVal=project.getProperty("output.var"); 
                project.setProperty("@{outputvar}",curVal);
                ]]>
            </script> 
        </sequential>
    </macrodef>
    

</project>