Add --asm option to elf2e32, so that GCCE builds can use --asm=gas with --dump=a and get a usable .s file (Bug 1405)
// Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// Implementation of the Huffman technique for the elf2e32 tool
// @internalComponent
// @released
//
//
#ifdef _MSC_VER
#pragma warning(disable: 4710) // function not inlined
#endif
#include <cassert>
#include "huffman.h"
#include "errorhandler.h"
#include "farray.h"
/**
Function for overflow
@internalComponent
@released
*/
void TBitOutput::OverflowL()
{
}
/**
Construct a bit stream output object
Following construction the bit stream is ready for writing bits, but will first call
OverflowL() as the output buffer is 'full'. A derived class can detect this state as
Ptr() will return null.
*/
TBitOutput::TBitOutput():iCode(0),iBits(-8),iPtr(0),iEnd(0)
{
}
/**
Construct a bit stream output object over a buffer
Data will be written to the buffer until it is full, at which point OverflowL() will
be called. This should handle the data and then can Set() again to reset the buffer
for further output.
@param "TUint8* aBuf" The buffer for output
@param "TInt aSize" The size of the buffer in bytes
*/
TBitOutput::TBitOutput(TUint8* aBuf,TInt aSize):iCode(0),iBits(-8),iPtr(aBuf),iEnd(aBuf+aSize)
{
}
/**
Write a huffman code
This expects a huffman code value as generated by Huffman::Encoding()
@param "TUint aHuffCode" The huffman code write to the stream
@leave "OverflowL()" If the output buffer is full, OverflowL() is called
*/
void TBitOutput::HuffmanL(TUint aHuffCode)
{
DoWriteL(aHuffCode<<(32-Huffman::KMaxCodeLength),aHuffCode>>Huffman::KMaxCodeLength);
}
/**
Write an arbitrary integer value
Write an unsigned integer using the number of bits specified. Only the low order bits of the
value are written to the output, most significant bit first.
@param "TUint aValue" The value to write to the stream
@param "TUint aLength" The number of bits to output
@leave "OverflowL()" If the output buffer is full, OverflowL() is called
*/
void TBitOutput::WriteL(TUint aValue,TInt aLength)
{
if (aLength)
DoWriteL(aValue<<=32-aLength,aLength);
}
/**
Pad the bitstream to the next byte boundary
Terminate the bitstream by padding the last byte with the requested value.
Following this operation the bitstream can continue to be used, the data will start at the
next byte.
@param "TUint aPadding" The bit value to pad the final byte with
@leave "OverflowL()" If the output buffer is full, OverflowL() is called
*/
void TBitOutput::PadL(TUint aPadding)
{
if (iBits>-8)
WriteL(aPadding?0xffffffffu:0,-iBits);
}
/**
Write the higher order bits to the stream
@internalComponent
@released
*/
void TBitOutput::DoWriteL(TUint aBits,TInt aSize)
{
if (aSize>25)
{
// cannot process >25 bits in a single pass so do the top 8 bits first
assert(aSize<=32);
DoWriteL(aBits&0xff000000u,8);
aBits<<=8;
aSize-=8;
}
TInt bits=iBits;
TUint code=iCode|(aBits>>(bits+8));
bits+=aSize;
if (bits>=0)
{
TUint8* p=iPtr;
do
{
if (p==iEnd)
{
// run out of buffer space so invoke the overflow handler
iPtr=p;
OverflowL();
p=iPtr;
assert(p!=iEnd);
}
*p++=TUint8(code>>24);
code<<=8;
bits-=8;
} while (bits>=0);
iPtr=p;
}
iCode=code;
iBits=bits;
}
/**
Constructor for class TFileOutput
@internalComponent
@released
*/
TFileOutput::TFileOutput(std::ofstream & os):iOutStream(os)
{
Set(iBuf,KBufSize);
}
/**
Function to empty the buffer and reset the pointers
@internalComponent
@released
*/
void TFileOutput::OverflowL()
{
FlushL();
Set(iBuf,KBufSize);
}
/**
Function to write out the contents of the buffer
@internalComponent
@released
*/
void TFileOutput::FlushL()
{
TInt len=Ptr()-iBuf;
if (len)
{
iOutStream.write(reinterpret_cast<char *>(iBuf), len); // write extended header
iDataCount += len;
}
}
/**
Recursive function to calculate the code lengths from the node tree
@internalComponent
@released
*/
void HuffmanLengthsL(TUint32* aLengths,const TNode* aNodes,TInt aNode,TInt aLen)
{
if (++aLen>Huffman::KMaxCodeLength)
throw E32ImageCompressionError(HUFFMANBUFFEROVERFLOWERROR);
const TNode& node=aNodes[aNode];
TUint x=node.iLeft;
if (x&KLeaf)
aLengths[x&~KLeaf]=aLen;
else
HuffmanLengthsL(aLengths,aNodes,x,aLen);
x=node.iRight;
if (x&KLeaf)
aLengths[x&~KLeaf]=aLen;
else
HuffmanLengthsL(aLengths,aNodes,x,aLen);
}
/**
Function to Insert the {aCount,aValue} pair into the already sorted array of nodes
@internalComponent
@released
*/
void InsertInOrder(TNode* aNodes, TInt aSize, TUint aCount, TInt aVal)
{
// Uses Insertion sort following a binary search...
TInt l=0, r=aSize;
while (l < r)
{
TInt m = (l+r) >> 1;
if (aNodes[m].iCount<aCount)
r=m;
else
l=m+1;
}
memmove(aNodes+l+1,aNodes+l,sizeof(TNode)*(aSize-l));
aNodes[l].iCount=aCount;
aNodes[l].iRight=TUint16(aVal);
}
/**
Generate a Huffman code.
This generates a Huffman code for a given set of code frequencies. The output is a table of
code lengths which can be used to build canonincal encoding tables or decoding trees for use
with the TBitInput and TBitOutput classes.
Entries in the table with a frequency of zero will have a zero code length and thus no
associated huffman encoding. If each such symbol should have a maximum length encoding, they
must be given at least a frequency of 1.
For an alphabet of n symbols, this algorithm has a transient memory overhead of 8n, and a
time complexity of O(n*log(n)).
@param "const TUint32 aFrequency[]" The table of code frequencies
@param "TInt aNumCodes" The number of codes in the table
@param "TUint32 aHuffman[]" The table for the output code-length table. This must be the same
size as the frequency table, and can safely be the same table
@leave "KErrNoMemory" If memory used for code generation cannot be allocated
@panic "USER ???" If the number of codes exceeds Huffman::KMaxCodes
*/
void Huffman::HuffmanL(const TUint32 aFrequency[],TInt aNumCodes,TUint32 aHuffman[])
{
if(TUint(aNumCodes)>TUint(KMaxCodes))
throw E32ImageCompressionError(HUFFMANTOOMANYCODESERROR);
// Sort the values into decreasing order of frequency
TNode* nodes = new TNode[aNumCodes];
TInt lCount=0;
for (TInt ii=0;ii<aNumCodes;++ii)
{
TInt c=aFrequency[ii];
if (c!=0)
InsertInOrder(nodes,lCount++,c,ii|KLeaf);
}
// default code length is zero
memset(aHuffman,0,aNumCodes*sizeof(TUint32));
if (lCount==0)
{
// no codes with frequency>0. No code has a length
}
else if (lCount==1)
{
// special case for a single value (always encode as "0")
aHuffman[nodes[0].iRight&~KLeaf]=1;
}
else
{
// Huffman algorithm: pair off least frequent nodes and reorder
do
{
--lCount;
TUint c=nodes[lCount].iCount + nodes[lCount-1].iCount;
nodes[lCount].iLeft=nodes[lCount-1].iRight;
// re-order the leaves now to reflect new combined frequency 'c'
InsertInOrder(nodes,lCount-1,c,lCount);
} while (lCount>1);
// generate code lengths in aHuffman[]
HuffmanLengthsL(aHuffman,nodes,1,0);
}
delete [] nodes;
if(!IsValid(aHuffman,aNumCodes))
throw E32ImageCompressionError(HUFFMANINVALIDCODINGERROR);
}
/**
Validate a Huffman encoding
This verifies that a Huffman coding described by the code lengths is valid. In particular,
it ensures that no code exceeds the maximum length and that it is possible to generate a
canonical coding for the specified lengths.
@param "const TUint32 aHuffman[]" The table of code lengths as generated by Huffman::HuffmanL()
@param "TInt aNumCodes" The number of codes in the table
@return True if the code is valid, otherwise false
*/
TBool Huffman::IsValid(const TUint32 aHuffman[],TInt aNumCodes)
{
// The code is valid if one of the following holds:
// (a) the code exactly fills the 'code space'
// (b) there is only a single symbol with code length 1
// (c) there are no encoded symbols
//
TUint remain=1<<KMaxCodeLength;
TInt totlen=0;
for (const TUint32* p=aHuffman+aNumCodes; p>aHuffman;)
{
TInt len=*--p;
if (len>0)
{
totlen+=len;
if (len>KMaxCodeLength)
return 0;
TUint c=1<<(KMaxCodeLength-len);
if (c>remain)
return 0;
remain-=c;
}
}
return remain==0 || totlen<=1;
}
/**
Create a canonical Huffman encoding table
This generates the huffman codes used by TBitOutput::HuffmanL() to write huffman encoded data.
The input is table of code lengths, as generated by Huffman::HuffmanL() and must represent a
valid huffman code.
@param "const TUint32 aHuffman[]" The table of code lengths as generated by Huffman::HuffmanL()
@param "TInt aNumCodes" The number of codes in the table
@param "TUint32 aEncodeTable[]" The table for the output huffman codes. This must be the same
size as the code-length table, and can safely be the same table.
@panic "USER ???" If the provided code is not a valid Huffman coding
@see IsValid()
@see HuffmanL()
*/
void Huffman::Encoding(const TUint32 aHuffman[],TInt aNumCodes,TUint32 aEncodeTable[])
{
if (!IsValid(aHuffman,aNumCodes))
throw E32ImageCompressionError(HUFFMANINVALIDCODINGERROR);
TFixedArray<TInt,KMaxCodeLength> lenCount;
lenCount.Reset();
TInt ii;
for (ii=0;ii<aNumCodes;++ii)
{
TInt len=aHuffman[ii]-1;
if (len>=0)
++lenCount[len];
}
TFixedArray<TUint,KMaxCodeLength> nextCode;
TUint code=0;
for (ii=0;ii<KMaxCodeLength;++ii)
{
code<<=1;
nextCode[ii]=code;
code+=lenCount[ii];
}
for (ii=0;ii<aNumCodes;++ii)
{
TInt len=aHuffman[ii];
if (len==0)
aEncodeTable[ii]=0;
else
{
aEncodeTable[ii] = (nextCode[len-1]<<(KMaxCodeLength-len))|(len<<KMaxCodeLength);
++nextCode[len-1];
}
}
}
/**
The encoding table for the externalised code
@internalComponent
@released
*/
const TUint32 HuffmanEncoding[]=
{
0x10000000,
0x1c000000,
0x12000000,
0x1d000000,
0x26000000,
0x26800000,
0x2f000000,
0x37400000,
0x37600000,
0x37800000,
0x3fa00000,
0x3fb00000,
0x3fc00000,
0x3fd00000,
0x47e00000,
0x47e80000,
0x47f00000,
0x4ff80000,
0x57fc0000,
0x5ffe0000,
0x67ff0000,
0x77ff8000,
0x7fffa000,
0x7fffb000,
0x7fffc000,
0x7fffd000,
0x7fffe000,
0x87fff000,
0x87fff800
};
/**
Function to encode 0a as '0' and 0b as '1', return number of symbols created
@internalComponent
@released
*/
void EncodeRunLengthL(TBitOutput& aOutput, TInt aLength)
{
if (aLength>0)
{
EncodeRunLengthL(aOutput,(aLength-1)>>1);
aOutput.HuffmanL(HuffmanEncoding[1-(aLength&1)]);
}
}
/**
Store a canonical huffman encoding in compact form
As the encoding is canonical, only the code lengths of each code needs to be saved.
Due to the nature of code length tables, these can usually be stored very compactly by
encoding the encoding itself, hence the use of the bit output stream.
@param "TBitOutput& aOutput" The output stream for the encoding
@param "const TUint32 aHuffman[]" The table of code lengths as generated by Huffman::HuffmanL()
@param "TInt aNumCodes" The number of huffman codes in the table
@leave "TBitOutput::HuffmanL()"
*/
void Huffman::ExternalizeL(TBitOutput& aOutput,const TUint32 aHuffman[],TInt aNumCodes)
{
// We assume that the code length table is generated by the huffman generator,
// in which case the maxmimum code length is 27 bits.
//
// We apply three transformations to the data:
// 1. the data goes through a move-to-front coder
// 2. apply a rle-0 coder which replace runs of '0' with streams of '0a' and '0b'
// 3. encode the result using a predefined (average) huffman coding
//
// This can be done in a single pass over the data, avoiding the need for additional
// memory.
//
// initialise the list for the MTF coder
TFixedArray<TUint8,Huffman::KMetaCodes> list;
TInt i;
for (i=0;i<list.Count();++i)
list[i]=TUint8(i);
TInt last=0;
TInt rl=0;
const TUint32* p32=aHuffman;
const TUint32* e32=p32+aNumCodes;
while (p32<e32)
{
TInt c=*p32++;
if (c==last)
++rl; // repeat of last symbol
else
{
// encode run-length
EncodeRunLengthL(aOutput,rl);
rl=0;
// find code in MTF list
TInt j;
for (j=1;list[j]!=c;++j)
;
// store this code
aOutput.HuffmanL(HuffmanEncoding[j+1]);
// adjust list for MTF algorithm
while (--j>0)
list[j+1]=list[j];
list[1]=TUint8(last);
last=c;
}
}
// encod any remaining run-length
EncodeRunLengthL(aOutput,rl);
}
const TInt KHuffTerminate=0x0001;
const TUint32 KBranch1=sizeof(TUint32)<<16;
/**
Function to write the subtree below aPtr and return the head
*/
TUint32* HuffmanSubTree(TUint32* aPtr,const TUint32* aValue,TUint32** aLevel)
{
TUint32* l=*aLevel++;
if (l>aValue)
{
TUint32* sub0=HuffmanSubTree(aPtr,aValue,aLevel); // 0-tree first
aPtr=HuffmanSubTree(sub0,aValue-(aPtr-sub0)-1,aLevel); // 1-tree
TInt branch0=(TUint8*)sub0-(TUint8*)(aPtr-1);
*--aPtr=KBranch1|branch0;
}
else if (l==aValue)
{
TUint term0=*aValue--; // 0-term
aPtr=HuffmanSubTree(aPtr,aValue,aLevel); // 1-tree
*--aPtr=KBranch1|(term0>>16);
}
else // l<iNext
{
TUint term0=*aValue--; // 0-term
TUint term1=*aValue--;
*--aPtr=(term1>>16<<16)|(term0>>16);
}
return aPtr;
}
/**
Create a canonical Huffman decoding tree
This generates the huffman decoding tree used by TBitInput::HuffmanL() to read huffman
encoded data. The input is table of code lengths, as generated by Huffman::HuffmanL()
and must represent a valid huffman code.
@param "const TUint32 aHuffman[]" The table of code lengths as generated by Huffman::HuffmanL()
@param "TInt aNumCodes" The number of codes in the table
@param "TUint32 aDecodeTree[]" The space for the decoding tree. This must be the same
size as the code-length table, and can safely be the same memory
@param "TInt aSymbolBase" the base value for the output 'symbols' from the decoding tree, by default
this is zero.
@panic "USER ???" If the provided code is not a valid Huffman coding
@see IsValid()
@see HuffmanL()
*/
void Huffman::Decoding(const TUint32 aHuffman[],TInt aNumCodes,TUint32 aDecodeTree[],TInt aSymbolBase)
{
if(!IsValid(aHuffman,aNumCodes))
throw E32ImageCompressionError(HUFFMANINVALIDCODINGERROR);
TFixedArray<TInt,KMaxCodeLength> counts;
counts.Reset();
TInt codes=0;
TInt ii;
for (ii=0;ii<aNumCodes;++ii)
{
TInt len=aHuffman[ii];
aDecodeTree[ii]=len;
if (--len>=0)
{
++counts[len];
++codes;
}
}
TFixedArray<TUint32*,KMaxCodeLength> level;
TUint32* lit=aDecodeTree+codes;
for (ii=0;ii<KMaxCodeLength;++ii)
{
level[ii]=lit;
lit-=counts[ii];
}
aSymbolBase=(aSymbolBase<<17)+(KHuffTerminate<<16);
for (ii=0;ii<aNumCodes;++ii)
{
TUint len=TUint8(aDecodeTree[ii]);
if (len)
*--level[len-1]|=(ii<<17)+aSymbolBase;
}
if (codes==1) // codes==1 special case: tree isn't complete
{
TUint term=aDecodeTree[0]>>16;
aDecodeTree[0]=term|(term<<16); // 0- and 1-terminate at root
}
else if (codes>1)
HuffmanSubTree(aDecodeTree+codes-1,aDecodeTree+codes-1,&level[0]);
}
/**
The decoding tree for the externalised code
*/
const TUint32 HuffmanDecoding[]=
{
0x0004006c,
0x00040064,
0x0004005c,
0x00040050,
0x00040044,
0x0004003c,
0x00040034,
0x00040021,
0x00040023,
0x00040025,
0x00040027,
0x00040029,
0x00040014,
0x0004000c,
0x00040035,
0x00390037,
0x00330031,
0x0004002b,
0x002f002d,
0x001f001d,
0x001b0019,
0x00040013,
0x00170015,
0x0004000d,
0x0011000f,
0x000b0009,
0x00070003,
0x00050001
};
/**
Restore a canonical huffman encoding from a bit stream
The encoding must have been stored using Huffman::ExternalizeL(). The resulting
code-length table can be used to create an encoding table using Huffman::Encoding()
or a decoding tree using Huffman::Decoding().
@param "TBitInput& aInput" The input stream with the encoding
@param "TUint32 aHuffman[]" The internalized code-length table is placed here
@param "TInt aNumCodes" The number of huffman codes in the table
@leave "TBitInput::HuffmanL()"
@see ExternalizeL()
See ExternalizeL for a description of the format
*/
void Huffman::InternalizeL(TBitInput& aInput,TUint32 aHuffman[],TInt aNumCodes)
{
// initialise move-to-front list
TFixedArray<TUint8,Huffman::KMetaCodes> list;
for (TInt i=0;i<list.Count();++i)
list[i]=TUint8(i);
TInt last=0;
// extract codes, reverse rle-0 and mtf encoding in one pass
TUint32* p=aHuffman;
const TUint32* end=aHuffman+aNumCodes;
TInt rl=0;
while (p+rl<end)
{
TInt c=aInput.HuffmanL(HuffmanDecoding);
if (c<2)
{
// one of the zero codes used by RLE-0
// update he run-length
rl+=rl+c+1;
}
else
{
while (rl>0)
{
if (p>end)
{
throw E32ImageCompressionError(HUFFMANINVALIDCODINGERROR);
}
*p++=last;
--rl;
}
--c;
list[0]=TUint8(last);
last=list[c];
memmove((void * const)&list[1],(const void * const)&list[0],(size_t)c);
if (p>end)
{
throw E32ImageCompressionError(HUFFMANINVALIDCODINGERROR);
}
*p++=last;
}
}
while (rl>0)
{
if (p>end)
{
throw E32ImageCompressionError(HUFFMANINVALIDCODINGERROR);
}
*p++=last;
--rl;
}
}
/**
bit-stream input class
Reverse the byte-order of a 32 bit value
This generates optimal ARM code (4 instructions)
*/
inline TUint reverse(TUint aVal)
{
TUint v=(aVal<<16)|(aVal>>16);
v^=aVal;
v&=0xff00ffff;
aVal=(aVal>>8)|(aVal<<24);
return aVal^(v>>8);
}
/**
Construct a bit stream input object
Following construction the bit stream is ready for reading bits, but will
immediately call UnderflowL() as the input buffer is empty.
*/
TBitInput::TBitInput():iCount(0),iRemain(0)
{
}
/**
Construct a bit stream input object over a buffer
Following construction the bit stream is ready for reading bits from the specified buffer.
@param "const TUint8* aPtr" The address of the buffer containing the bit stream
@param "TInt aLength" The length of the bitstream in bits
@param "TInt aOffset" The bit offset from the start of the buffer to the bit stream (defaults to zero)
*/
TBitInput::TBitInput(const TUint8* aPtr, TInt aLength, TInt aOffset)
{
Set(aPtr,aLength,aOffset);
}
/**
Set the memory buffer to use for input.
Bits will be read from this buffer until it is empty, at which point UnderflowL() will be called.
@param "const TUint8* aPtr" The address of the buffer containing the bit stream
@param "TInt aLength" The length of the bitstream in bits
@param "TInt aOffset" The bit offset from the start of the buffer to the bit stream (defaults to zero)
*/
void TBitInput::Set(const TUint8* aPtr, TInt aLength, TInt aOffset)
{
TUint p=(TUint)aPtr;
p+=aOffset>>3; // nearest byte to the specified bit offset
aOffset&=7; // bit offset within the byte
const TUint32* ptr=(const TUint32*)(p&~3); // word containing this byte
aOffset+=(p&3)<<3; // bit offset within the word
if (aLength==0)
iCount=0;
else
{
// read the first few bits of the stream
iBits=reverse(*ptr++)<<aOffset;
aOffset=32-aOffset;
aLength-=aOffset;
if (aLength<0)
aOffset+=aLength;
iCount=aOffset;
}
iRemain=aLength;
iPtr=ptr;
}
#ifndef __HUFFMAN_MACHINE_CODED__
/**
Read a single bit from the input
Return the next bit in the input stream. This will call UnderflowL() if there are no more
bits available.
@return The next bit in the stream
@leave "UnderflowL()" It the bit stream is exhausted more UnderflowL is called to get more
data
*/
TUint TBitInput::ReadL()
{
TInt c=iCount;
TUint bits=iBits;
if (--c<0)
return ReadL(1);
iCount=c;
iBits=bits<<1;
return bits>>31;
}
/**
Read a multi-bit value from the input
Return the next few bits as an unsigned integer. The last bit read is the least significant
bit of the returned value, and the value is zero extended to return a 32-bit result.
A read of zero bits will always reaturn zero.
This will call UnderflowL() if there are not enough bits available.
@param "TInt aSize" The number of bits to read
@return The bits read from the stream
@leave "UnderflowL()" It the bit stream is exhausted more UnderflowL is called to get more
data
*/
TUint TBitInput::ReadL(TInt aSize)
{
if (!aSize)
return 0;
TUint val=0;
TUint bits=iBits;
iCount-=aSize;
while (iCount<0)
{
// need more bits
#ifdef __CPU_X86
// X86 does not allow shift-by-32
if (iCount+aSize!=0)
val|=bits>>(32-(iCount+aSize))<<(-iCount); // scrub low order bits
#else
val|=bits>>(32-(iCount+aSize))<<(-iCount); // scrub low order bits
#endif
aSize=-iCount; // bits still required
if (iRemain>0)
{
bits=reverse(*iPtr++);
iCount+=32;
iRemain-=32;
if (iRemain<0)
iCount+=iRemain;
}
else
{
UnderflowL();
bits=iBits;
iCount-=aSize;
}
}
#ifdef __CPU_X86
// X86 does not allow shift-by-32
iBits=aSize==32?0:bits<<aSize;
#else
iBits=bits<<aSize;
#endif
return val|(bits>>(32-aSize));
}
/**
Read and decode a Huffman Code
Interpret the next bits in the input as a Huffman code in the specified decoding.
The decoding tree should be the output from Huffman::Decoding().
@param "const TUint32* aTree" The huffman decoding tree
@return The symbol that was decoded
@leave "UnderflowL()" It the bit stream is exhausted more UnderflowL is called to get more
data
*/
TUint TBitInput::HuffmanL(const TUint32* aTree)
{
TUint huff=0;
do
{
aTree=(const TUint32*)(((TUint8*)aTree)+(huff>>16));
huff=*aTree;
if (ReadL()==0)
huff<<=16;
} while ((huff&0x10000u)==0);
return huff>>17;
}
#endif
/**
Handle an empty input buffer
This virtual function is called when the input buffer is empty and more bits are required.
It should reset the input buffer with more data using Set().
A derived class can replace this to read the data from a file (for example) before reseting
the input buffer.
@leave "KErrUnderflow" The default implementation leaves
*/
void TBitInput::UnderflowL()
{
throw E32ImageCompressionError(HUFFMANBUFFEROVERFLOWERROR);
}