# Copyright (c) 2006-2010 Nokia Corporation and/or its subsidiary(-ies).
# All rights reserved.
# This component and the accompanying materials are made available
# under the terms of the License "Eclipse Public License v1.0"
# which accompanies this distribution, and is available
# at the URL "http://www.eclipse.org/legal/epl-v10.html".
#
# Initial Contributors:
# Nokia Corporation - initial contribution.
#
# Contributors:
#
# Description:
# E32 EXE/DLL ABIv2 Function Like Makefile (FLM)
# Knows how to build all possible ABIV2 executables for ARM
#
#

# Feature/Binary Variation
#
# FEATUREVARIANTNAME != "" implies a product build configuration
# FEATUREVARIANT == 1 implies a .mmp defined feature variant binary
#
# By default:
#   Build all binaries in non-product builds *and*
#   Only build feature variant binaries in product builds.
#
#   test FEATUREVARIANTNAME=="" or FEATUREVARIANT==1
#
# If FEATUREVARIANTSAFE is set:
#   Only build feature invariant binaries in non-product builds *and*
#   Only build feature variant binaries in product builds.
#
#   test (FEATUREVARIANTNAME=="" and FEATUREVARIANT=="") or
#        (FEATUREVARIANTNAME!="" and FEATUREVARIANT==1)
#

DOBUILD:=
ifeq ($(FEATUREVARIANTSAFE),)
  DOBUILD:=$(if $(or $(call equal,$(FEATUREVARIANTNAME),),\
                     $(call equal,$(FEATUREVARIANT),1)),1)
else
  DOBUILD:=$(if $(or $(and $(call equal,$(FEATUREVARIANTNAME),),\
                           $(call equal,$(FEATUREVARIANT),)),\
                     $(and $(call not,$(call equal,$(FEATUREVARIANTNAME),)),\
                           $(call equal,$(FEATUREVARIANT),1))),1)
endif

ifeq ($(DOBUILD),1)

$(if $(FLMDEBUG),$(info <debug><flm name='e32abiv2' target='$(TARGET)' type='$(TARGETTYPE)' outputpath='$(OUTPUTPATH)' metasource='$(METASOURCE)' postlinkfiletype='$(POSTLINKFILETYPE)' /></debug>))

# Enable DELETE_ON_FAILED_COMPILE work around for failed RVCT 2.2 compiles
ifneq ($(DELETE_ON_FAILED_COMPILE),)
RVCT22_DELETE_WORKAROUND:=|| { $$(GNURM) $$@; exit 1; }
endif # ifneq ($(DELETE_ON_FAILED_COMPILE),)

# Strip switch-type parameters
#
POSTLINKTARGETTYPE:=$(strip $(POSTLINKTARGETTYPE))
TARGETEXT:=$(if $(REQUESTEDTARGETEXT),$(REQUESTEDTARGETEXT),$(POSTLINKFILETYPE))

UID1:=$(strip $(UID1))
UID2:=$(strip $(UID2))
UID3:=$(strip $(UID3))
SID:=$(strip $(SECUREID))
VENDORID:=$(strip $(VENDORID))
AUTOEXPORTS:=$(strip $(AUTOEXPORTS))
DEFFILE:=$(strip $(DEFFILE))
IMPORTLIBRARYREQUIRED:=$(strip $(IMPORTLIBRARYREQUIRED))
EPOCALLOWDLLDATA:=$(strip $(EPOCALLOWDLLDATA))
PAGED:=$(strip $(PAGED))

# the output directories
VARIANTPLATFORM:=$(VARIANTPLATFORM)$(FEATUREVARIANTNAME)
RELEASABLEPATH:=$(RELEASEPATH)/$(VARIANTPLATFORM)/$(VARIANTTYPE)
INTERMEDIATEPATH:=$(OUTPUTPATH)/$(VARIANTPLATFORM)/$(VARIANTTYPE)
INTERMEDIATE_PLATFORM_PATH:=$(OUTPUTPATH)/$(VARIANTPLATFORM)
TRACE_MARKER_PATH:=$(OUTPUTPATH)
IMPORTLIBPATH:=$(RUNTIME_LIBS_PATH)

# LOCALLY USED VARIABLES
ADDITIONAL_LIBS:=
CLEANTARGETS:=
WHATRELEASE:=

LIBRARIES:=$(patsubst %.dso,%.$(IMPLIB_EXTENSION),$(LIBRARY))
LIBRARIES_DEBUG:=$(patsubst %.dso,%.$(IMPLIB_EXTENSION),$(LIBRARY_DEBUG))

# Work out which new/delete library to use for binaries.
CHECKLIB_TYPE:=symc++
STDCPPTAGFILE:=
ifeq ($(NOSTDCPP),1)
  ifeq ($(STDCPP),1)
    $(info <warning>STDCPP and NOSTDCPP both specified in $(PROJECT_META)</warning>)
  else
    ifeq ($(HAS_DEDICATED_OP_NEWDEL_LIB),1)
      DEFAULT_NEWLIB:=$(DEFAULT_SYMBIAN_NEWLIB)
    endif
  endif
else
  ifeq ($(STDCPP),1)
    CDEFS:=$(CDEFS) __SYMBIAN_STDCPP_SUPPORT__
    ifneq ($(SUPPORTS_STDCPP_NEWLIB),)
      ifeq ($(HAS_DEDICATED_OP_NEWDEL_LIB),1)
        DEFAULT_NEWLIB:=$(DEFAULT_STDCPP_NEWLIB)
      endif
      CHECKLIB_TYPE:=stdc++
      STDCPPTAGFILE:=$(EPOCROOT)/epoc32/tools/tag/tag_elf
    endif
  endif
endif

# If NEWLIB is specified in the MMP file, it overrides all the past stuff.
ifeq ($(NEWLIB),)
  NEWLIB:=$(DEFAULT_NEWLIB)
endif


##########################################################################
## OUTPUTS - externally relevant targets that this FLM generates


ifeq ($(EXPORTLIBRARY),)
  EXPORTLIBRARY:=$(TARGET)
endif

# This will insert the file version between the name and the extension.
# If there is more than one dot in generated filename the inserted position will be
# BEFORE the last but two dot. E.g name1.name2.name3.dll to name1.name2{version}.name3.dll
LIBEXT:=$(lastword $(subst .,$(CHAR_SPACE) ,$(EXPORTLIBRARY)))
LIBBASE:=$(patsubst %.$(LIBEXT),%,$(EXPORTLIBRARY))
ifneq ($(findstring .,$(EXPORTLIBRARY)),)
  # Please note $(EXPORTLIBRARY) doesn't include target type.
  VER_E32IMPORTLIBBASE:=$(IMPORTLIBPATH)/$(LIBBASE){$(VERSIONHEX)}.$(LIBEXT)
else
  VER_E32IMPORTLIBBASE:=$(IMPORTLIBPATH)/$(EXPORTLIBRARY){$(VERSIONHEX)}
endif

# Postlinkable targets need to be linked and elf2e32'd
ifneq ($(DOPOSTLINK),)
    E32TARGET:=$(RELEASABLEPATH)/$(TARGET)$(if $(EXPLICITVERSION),{$(VERSIONHEX)},).$(TARGETEXT)
    LINK_TARGET:=$(RELEASABLEPATH)/$(TARGET)$(if $(EXPLICITVERSION),{$(VERSIONHEX)},).$(TARGETEXT).sym
    MAPFILE:=$(RELEASABLEPATH)/$(TARGET).$(TARGETEXT).map
else
  E32TARGET:=
  LINK_TARGET:=
  MAPFILE:=
endif

# libs and klibs, on the other hand need to be archived
ifneq ($(call isoneof,$(TARGETTYPE),lib klib stdlib),)
  ARTARGET:=$(RELEASABLEPATH)/$(TARGET).lib
  # We need libs and klibs before we can link stuff with them:
  LIBRARY:: $(ARTARGET)
else
  ARTARGET:=
endif


ifneq ($(IMPORTLIBRARYREQUIRED),) # no dso files for plugins, animation dlls etc
  # make sure we don't build import libraries more than once for UDEB and UREL
  # Without this, wierd target-specific variable problems happen with LIBRARY in particular

  TMP_IMPORTLIBTARGET_ROOT:=$(IMPORTLIBPATH)/$(EXPORTLIBRARY)

  # ABIv2 .dso
  IMPORTLIBTARGET_DSO:=
  IMPORTLIBTARGETVERSIONED_DSO:=

  BUILDMARKER_IMPORTLIBTARGET_DSO:=TARGET_$(subst :,,$(VER_E32IMPORTLIBBASE)).$(IMPLIB_EXTENSION)
  WHATRELEASE:=$(WHATRELEASE) $(if $(EXPLICITVERSION),,$(TMP_IMPORTLIBTARGET_ROOT).$(IMPLIB_EXTENSION))
  WHATRELEASE:=$(WHATRELEASE) $(VER_E32IMPORTLIBBASE).$(IMPLIB_EXTENSION)
  ifeq ($($(BUILDMARKER_IMPORTLIBTARGET_DSO)),)
    IMPORTLIBTARGET_DSO:=$(TMP_IMPORTLIBTARGET_ROOT).$(IMPLIB_EXTENSION)
    IMPORTLIBTARGETVERSIONED_DSO:=$(VER_E32IMPORTLIBBASE).$(IMPLIB_EXTENSION)
  endif

  # ABIv1 .lib (for specific kits and toolchains only)
  IMPORTLIBTARGET_LIB:=
  IMPORTLIBTARGETVERSIONED_LIB:=
  BUILDMARKER_IMPORTLIBTARGET_LIB:=TARGET_$(subst :,,$(VER_E32IMPORTLIBBASE)).lib
  # Only for kits that require and tools that support them
  ifneq ($(SUPPORTS_ABIV1_IMPLIBS),)
    WHATRELEASE:=$(WHATRELEASE) $(if $(EXPLICITVERSION),,$(TMP_IMPORTLIBTARGET_ROOT).lib)
    WHATRELEASE:=$(WHATRELEASE) $(VER_E32IMPORTLIBBASE).lib
    ifeq ($($(BUILDMARKER_IMPORTLIBTARGET_LIB)),)
      IMPORTLIBTARGET_LIB:=$(TMP_IMPORTLIBTARGET_ROOT).lib
      IMPORTLIBTARGETVERSIONED_LIB:=$(VER_E32IMPORTLIBBASE).lib
    endif
  endif
endif

# Try to make sure that we get the right linkas name
# If linkas is specified then split it up and
# put the hex version number in the right place
ifeq ($(LINKAS),)
  LINKASNAME=$(TARGET)
  LINKASTYPE=$(TARGETEXT)
else
  SPLIT_LINKAS=$(subst ., ,$(LINKAS))
  LINKASNAME=$(word 1,$(SPLIT_LINKAS))
  LINKASTYPE=$(word 2,$(SPLIT_LINKAS))
endif

# ignore UID3 if it is zero
ifeq ($(UID3),00000000)
  LINKASVERSIONED=$(LINKASNAME){$(VERSIONHEX)}.$(LINKASTYPE)
else
  LINKASVERSIONED=$(LINKASNAME){$(VERSIONHEX)}$(if $(UID3),[$(UID3)],).$(LINKASTYPE)
endif

##########################################################################
## TARGET GROUPS ##
RELEASABLES:=$(strip $(E32TARGET) $(ARTARGET) $(LINK_TARGET) $(MAPFILE))
# More targets to be added later
TARGETS:=$(strip $(E32TARGET) $(IMPORTLIBTARGET) $(LINK_TARGET) $(ARTARGET))

CREATABLEPATHS:=$(OUTPUTPATH)
CREATABLEPATHS:=$(CREATABLEPATHS) $(INTERMEDIATE_PLATFORM_PATH)
CREATABLEPATHS:=$(CREATABLEPATHS) $(INTERMEDIATEPATH)
CREATABLEPATHS:=$(CREATABLEPATHS) $(RELEASABLEPATH)
CREATABLEPATHS:=$(CREATABLEPATHS) $(RUNTIME_LIBS_PATH)
CREATABLEPATHS:=$(CREATABLEPATHS) $(IMPORTLIBPATH)
WHATRELEASE:=$(WHATRELEASE) $(RELEASABLES)



## HIGH LEVEL Targets ##
.PHONY:: $(ALLTARGET)

## GLOBAL TARGETS ############################################################
$(ALLTARGET):: $(RELEASABLES)
TARGET:: $(RELEASABLES)

## Internal targets ##

# Determine the name of the generated DSO file ###############################
# This is to generate the dso with the Some{Versionhex}.file.dso
# It reproduces what appears to be a problem in the current build system
# that affects messageintercept{000a0000}.esockdebug.dso whose
# filename differs from it's "linkas" name.
E32VAR:=$(subst .,$(CHAR_SPACE) ,$(TARGET))
E32SOME:=$(word 1,$(E32VAR))
E32VAR2:=$(patsubst $(E32SOME).%,%,$(TARGET))

# Separate '_SH' variables created for output into bash - Preserves '{' and '}'

ifneq ($(findstring .,$(TARGET)),)
	DSODEFFILENAMEBASE:=$(E32SOME){$(VERSIONHEX)}.$(E32VAR2)
else
	DSODEFFILENAMEBASE:=$(TARGET){$(VERSIONHEX)}
endif
GENERATED_DSO:=$(call dblquote,$(INTERMEDIATEPATH)/$(DSODEFFILENAMEBASE).$(IMPLIB_EXTENSION))
GENERATED_DEFFILE:=$(INTERMEDIATEPATH)/$(DSODEFFILENAMEBASE).def

## IMPORT LIBRARY  ###########################################################

# Static libraries will be postlinked when they are used so don't try to postlink them
ifeq ($(e32importlib_mk),)
  e32importlib_mk:=1
  include $(FLMHOME)/e32importlib.mk
endif

ifneq ($(IMPORTLIBRARYREQUIRED),)
ifneq ($(or $(DEFFILE),$(EXPORTUNFROZEN)),)
# Both ABIv2 .dso and ABIv1 .lib import library generation require a processed .def file,
# unless EXPORTUNFROZEN is being used
PREPPEDDEFFILE:=
ifneq ($(DEFFILE),)
  ifeq ($(EXPORTUNFROZEN),)
    PREPPEDDEFFILE:=$(INTERMEDIATEPATH)/$(TARGET).prep
    CLEANTARGETS:=$(CLEANTARGETS) $(PREPPEDDEFFILE)
    $(eval $(importlibtarget_prepfile_$(BASE_ARCH)))
  endif
endif

# ABIv2 .dso
ifneq ($(IMPORTLIBTARGET_DSO),) # check that we haven't tried to specify this target already

  # By Now we're committed to producing a target for this DSO so it's safe to
  # set the marker that will prevent any further targets from being made.
  $(eval $(BUILDMARKER_IMPORTLIBTARGET_DSO):=1)

  ifneq ($(EXPLICITVERSION),)
    TARGETS:=$(strip $(TARGETS) $(IMPORTLIBTARGETVERSIONED_DSO))

    # Add this importlibrary to our global targets
    LIBRARY:: $(IMPORTLIBTARGETVERSIONED_DSO)
    $(ALLTARGET):: $(IMPORTLIBTARGETVERSIONED_DSO)
    TARGET:: $(IMPORTLIBTARGETVERSIONED_DSO)

  else
    TARGETS:=$(strip $(TARGETS) $(IMPORTLIBTARGETVERSIONED_DSO) $(IMPORTLIBTARGET_DSO))

    # Add this importlibrary to our global targets
    LIBRARY:: $(IMPORTLIBTARGET_DSO)
    $(ALLTARGET):: $(IMPORTLIBTARGETVERSIONED_DSO) $(IMPORTLIBTARGET_DSO)
    TARGET:: $(IMPORTLIBTARGETVERSIONED_DSO) $(IMPORTLIBTARGET_DSO)


  endif

  ifneq ($(EXPORTUNFROZEN),) # Unfrozen  - warn and create .dso as side-effect of the final postlink
    $(info <warning project='$(PROJECT_META)' component='$(COMPONENT_META)'>EXPORTUNFROZEN present in $(PROJECT_META) - unfrozen exports will be represented in import library.</warning> )
    define importlibtarget_unfrozen
      $(IMPORTLIBTARGET_DSO): $(IMPORTLIBTARGETVERSIONED_DSO)
		$(call startrule,importlibtarget_unfrozen,FORCESUCCESS) \
		$(GNUCP) $$(call dblquote,$$<) $$(call dblquote,$$@) \
		$(call endrule,importlibtarget_unfrozen)
    endef

    define importlibtarget_unfrozen_ver
      $(IMPORTLIBTARGETVERSIONED_DSO): $(E32TARGET)
		$(call startrule,importlibversioned_unfrozen,FORCESUCCESS) \
		$(GNUCP) "$(GENERATED_DSO)" "$$@" \
		$(call endrule,importlibversioned_unfrozen)
    endef

    ifeq ($(EXPLICITVERSION),)
      # Generate the general dso if we aren't
      # being asked to make just the specific version.
      $(eval $(importlibtarget_unfrozen))
    endif

    $(eval $(importlibtarget_unfrozen_ver))
  else
    ifneq ($(DEFFILE),) # Frozen - use the def file and create .dso directly
      define importlibtarget_func
       $(IMPORTLIBTARGET_DSO): $(IMPORTLIBTARGETVERSIONED_DSO)
	   $(call startrule,importlibtarget,FORCESUCCESS) \
	   $(GNUCP) "$$<" "$$@" \
	   $(call endrule,importlibtarget)
      endef

      ifeq ($(EXPLICITVERSION),)
          # Generate the general dso if we aren't
          # being asked to make just the specific version.
          $(eval $(importlibtarget_func))
      endif

      $(eval $(importlibtargetversioned_$(BASE_ARCH)))
    endif #  ifneq ($(DEFFILE),)
  endif #  ifneq ($(EXPORTUNFROZEN),)
endif #  ifneq ($(IMPORTLIBTARGET_DSO),)

# ABIv1 .lib
ifneq ($(IMPORTLIBTARGETVERSIONED_LIB),) # check that we haven't tried to specify this target already

  # By Now we're committed to producing a target for this DSO so it's safe to
  # set the marker that will prevent any further targets from being made.
  $(eval $(BUILDMARKER_IMPORTLIBTARGET_LIB):=1)

  define abiv1_generatelib

    ifeq ($(EXPLICITVERSION),)
      LIBRARY:: $(IMPORTLIBTARGETVERSIONED_LIB) $(IMPORTLIBTARGET_LIB)

    else
      LIBRARY:: $(IMPORTLIBTARGETVERSIONED_LIB)

    endif

    # If frozen, a prepped .def file is used as the basis for .lib creation
    # If unfrozen, .lib files are based on the .def file generated by the final postlink
    $(IMPORTLIBTARGETVERSIONED_LIB): $(if $(EXPORTUNFROZEN),$(E32TARGET),$(PREPPEDDEFFILE))
	$(call startrule,importlibversioned_abiv1) \
        if [ -f "$(EPOCROOT)/epoc32/tools/def2dll.pl" -a -f "$(if $(EXPORTUNFROZEN),$(call dblquote,$(GENERATED_DEFFILE)),$(PREPPEDDEFFILE))" ]; then \
                 $(PERL) $(EPOCROOT)/epoc32/tools/def2dll.pl \
		--path=$(IMPORTLIBPATH) \
		--bldpath=$(INTERMEDIATEPATH) \
		--import=$(notdir $(basename $(IMPORTLIBTARGETVERSIONED_LIB))) \
		--deffile="$(if $(EXPORTUNFROZEN),$(call dblquote,$(GENERATED_DEFFILE)),$(PREPPEDDEFFILE))" \
		--linkAs=$(call dblquote,$(LINKASVERSIONED)) \
		--inter ; fi \
	$(call endrule,importlibversioned_abiv1)

    ifeq ($(EXPLICITVERSION),)
      $(IMPORTLIBTARGET_LIB): $(IMPORTLIBTARGETVERSIONED_LIB)
	$(call startrule,importlibtarget_abiv1) \
	if [ -f $(EPOCROOT)/epoc32/tools/def2dll.pl ]; then $(GNUCP) "$$<" "$$@" ; fi \
	$(call endrule,importlibtarget_abiv1)
    endif
  endef

  $(eval $(abiv1_generatelib))
endif #  ifneq ($(IMPORTLIBTARGET_LIB),)
endif #  ($(or $(DEFFILE),$(EXPORTUNFROZEN)),)
endif #  ifneq ($(IMPORTLIBRARYREQUIRED),)


## POSTLINK ##################################################################

# Set up the name of the exports file if this is a customdll
EXPTARGET:=
ifneq ($(DOPOSTLINK),)
  ifneq ($(and $(or $(STATICLIBRARY),$(ARMLIBS),$(ARMRT)),$(DEFFILE)),)
    EXPTARGET:=$(INTERMEDIATE_PLATFORM_PATH)/$(notdir $(VER_E32IMPORTLIBBASE)).exp
  endif
endif

# Generating the import library is enough if TARGETTYPE=implib #############

ifneq ($(DOPOSTLINK),)
# Capabilities
FINAL_CAPABILITIES:=$(if $(CAPABILITY),$(CAPABILITY),NONE)

# Paging options for the old postlinker
POSTLINKER_PAGEDOPTION:=--defaultpaged
ifeq ($(PAGED),1)
  POSTLINKER_PAGEDOPTION:=--paged
endif
ifeq ($(PAGED),0)
  POSTLINKER_PAGEDOPTION:=--unpaged
endif

CLEANTARGETS:=$(CLEANTARGETS) $(E32TARGET)
CLEANTARGETS:=$(CLEANTARGETS) $(GENERATED_DEFFILE)
CLEANTARGETS:=$(CLEANTARGETS) $(GENERATED_DSO)

endif # ifneq ($(DOPOSTLINK),)

ifneq ($(TARGETTYPE),implib)

## CUSTOM DLLS ###############################################################
# exp file
#
# This tends to help getting exported objects
# out of the arm libs and into custom dlls.

ifneq ($(EXPTARGET),)
ifeq ($(TARGET_$(EXPTARGET)),)
# We only need one of these exptargets for UDEB and UREL
TARGET_$(EXPTARGET):=1

EXPTARGETASMFILE:=$(INTERMEDIATE_PLATFORM_PATH)/$(notdir $(VER_E32IMPORTLIBBASE)).s

define e32expgen_func
$(EXPTARGET): $(DEFFILE) $(POSTLINKER)
	$(call startrule,expgen) \
	$(POSTLINKER) \
	   --definput=$$(call dblquote,$(DEFFILE)) \
	   --dump=a $(if $(POSTLINKER_SUPPORTS_ASMTYPE),$(POSTLINKER_ASM_OPTION),) \
	   --output=$(call dblquote,$(EXPTARGETASMFILE)) && \
	$(ASM) $(TARGET_ARCH_OPTION) $(AAPCS_OPTION) $(ASM_OUTPUT_OPTION) $$(call dblquote, $$@) $(EXPTARGETASMFILE) \
	$(call endrule,expgen)
endef

$(eval $(e32expgen_func))
CLEANTARGETS:=$(CLEANTARGETS) $(EXPTARGET) $(EXPTARGETASMFILE)
endif
endif




## SOURCE FILES ##############################################################

# Source files can be either C++ files (.cpp) or Assmbler-in-C++ files (.cia)
# We have to split the two because they have the same link stage, the compile
# stage is different for each.

CPPFILEEXTENSIONS:=.cpp .CPP .Cpp .CPp .CpP .cPP .cpP .cPp .cc .CC \
	.Cc .c++ .C++ .cxx .CXX .Cxx .cXx .CxX .CXx .cC .cXX .cxX
CFILEEXTENSIONS:=.c .C
CIAFILEEXTENSIONS:=.CIA .cia .Cia .cIa .cIA .ciA .CIa .CiA
ASMFILEEXTENSIONS:=.s .S


# Extract the CPP files from our sources
CPPFILES:=$(call extractfilesoftype,$(CPPFILEEXTENSIONS),$(SOURCE))
CFILES:=$(call extractfilesoftype,$(CFILEEXTENSIONS),$(SOURCE))
ASMFILES:=$(call extractfilesoftype,$(ASMFILEEXTENSIONS),$(SOURCE))

# Find out what assember-in-c files there are
# If appropriate, work out what CPP files will be created from the assembler files
CIAFILES:=$(call extractfilesoftype,$(CIAFILEEXTENSIONS),$(SOURCE))
CIA_CPPFILES:=
ifeq ($(TRANSFORM_CIA),1)
  CIA_CPPFILES:=$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(CIAFILEEXTENSIONS),_.cpp,$(CIAFILES)))
else

endif

## LINK ######################################################################
# Bring together all the .o files compiled from  .cpp, .c, .s and .cia files.
# These files are stored in the "non-releasable" output diretory.

define mapcpp2object
$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(CPPFILEEXTENSIONS),.o,$1))
endef

define mapc2object
$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(CFILEEXTENSIONS),.o,$1))
endef

define mapasm2object
$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(ASMFILEEXTENSIONS),.o,$1))
endef

define mapcia2object
$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(CIAFILEEXTENSIONS),_.o,$1))
endef

# Determine what object files will be linked by using the source files.
CPPFILES_LINKOBJECTS:=$(call mapcpp2object,$(CPPFILES))
CFILES_LINKOBJECTS:=$(call mapc2object,$(CFILES))
ifeq ($(TRANSFORM_CIA),1)
  CIAFILES_LINKOBJECTS:=$(patsubst %_.cpp,%_.o,$(CIA_CPPFILES))
else
  CIAFILES_LINKOBJECTS:=$(call mapcia2object,$(CIAFILES))
endif
ASMFILES_LINKOBJECTS:=$(call mapasm2object,$(ASMFILES))

# Try to link object files in the order in which the source files were specified.
# This makes BC comparisons with non-Raptor builds easier.
# Use the order of the source list to establish the order of the object files:
LINKOBJECTS:=$(call relocatefiles,$(INTERMEDIATEPATH),$(SOURCE))
# Replace the file extensions of the Source files with .o (or _.o for cia files) now
# the list will contain the object files in the same order as the list of source files.
LINKOBJECTS:=$(foreach FILE,$(LINKOBJECTS),$(basename $(FILE))$(if $(filter $(addprefix %,$(CIAFILEEXTENSIONS)),$(FILE)),_).o)

ifneq ($(MULTIFILE_ENABLED),)
MULTIFILEOBJECT:=$(INTERMEDIATEPATH)/$(TARGET).$(POSTLINKFILETYPE)_$(VARIANTTYPE)_multifileobject.o
MULTIFILE_VIAFILE:=$(INTERMEDIATEPATH)/$(TARGET)_$(VARIANTTYPE)_multifile.via
endif

## Via file ####################################
# list of all objects to be linked
#
VIAFILE:=$(INTERMEDIATEPATH)/$(TARGET)_$(VARIANTTYPE)_objects.via
ifneq ($(GENERATELINKERFEEDBACK),)
FEEDBACKFILE:=$(INTERMEDIATEPATH)/$(TARGET)_$(VARIANTTYPE)_feedback.fdb
endif

# The groupin10 macro allows us to construct a via file, 10 objects at a time
# to avoid limits on argument lengths and sizes on Windows.
# It expands to a list of commands, each of which is on a separate line.
# This causes the shell to be invoked once for each line but each line should
# be shorter than the maximum allowed by windows.
define groupin10
	$(if $1,@echo -e $(foreach L,$(wordlist 1,10,$1),"$(L)\\n") >>$(VIAFILE),)
	$(if $1,$(call groupin10,$(wordlist 11,$(words $1),$1)),@true)
endef

################################################
## ARMFPU postlinker option
#
POSTLINKER_FPU:=$(patsubst $(ARMFPU)>%,%,$(filter $(ARMFPU)>%,$(POSTLINKER_FPU_MAPPING)))
POSTLINKER_FPU:=$(if $(POSTLINKER_FPU),$(POSTLINKER_FPU),$(POSTLINKER_FPU_DEFAULT))

################################################


## Link-type selection:
#	runtime static libraries link via AR
ifneq ($(ARTARGET),)
# Assuming that there are no libdeps in this case because this is probably one of the
# Runtime libraries which has no deps.

define artarget_func
$(ARTARGET): $(if $(MULTIFILE_ENABLED),$(MULTIFILEOBJECT),$(LINKOBJECTS)) $(STDCPPTAGFILE)
	$(if $(MULTIFILE_ENABLED),,@echo "$(STDCPPTAGFILE)" > $(VIAFILE);
	$(call groupin10,$(LINKOBJECTS)) ;)
	$(call startrule,ar,FORCESUCCESS) \
	$$(call dblquote,$(AR)) $(ARCHIVER_CREATE_OPTION) $$@ $(if $(MULTIFILE_ENABLED),$(MULTIFILEOBJECT),$(COMMANDFILE_OPTION)$(VIAFILE)) \
	$(call endrule,ar)
endef
$(eval $(artarget_func))

CLEANTARGETS:=$(CLEANTARGETS) $(VIAFILE)
endif



# Targettype is some type of DLL or EXE (or derivative)
ifneq ($(LINK_TARGET),)

located_ARMLIBS:=$(foreach L,$(ARMLIBS),$(wildcard $(RVCTLIB)/*/$(L)))
located_STATICLIBRARIES:=$(foreach L,$(STATICLIBRARY),$(STATIC_LIBRARY_DIR)/$(L).lib)
e32abiv2_LIBS:=$(EXPTARGET) $(LINKER_STUB_LIBRARY) $(if $(STATIC_RUNTIME_LIB),$(STATIC_RUNTIME_DIR)/$(STATIC_RUNTIME_LIB),) $(located_STATICLIBRARIES)
# DLLS and EXEs - These objects are linked by a linker
ifeq ($(ARMRT),)
# Some of the runtime libraries do not set ARMRT because of a circular reference
# problem; we need to stop these from linking to their own dso and not link to
# the STATIC_LIBS_LIST.
ifneq ($(findstring $(TARGET).dso,$(RUNTIME_LIBS_LIST)),)
# (almost) ARM RUNTIME LIBS
REDUCED_RUNTIME_LIBS_LIST:=$(subst $(TARGET).dso,,$(RUNTIME_LIBS_LIST))

ifeq ($(VARIANTTYPE),udeb)
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(IMPORTLIBPATH)/,$(LIBRARIES_DEBUG)) $(addprefix $(RUNTIME_LIBS_PATH)/,$(REDUCED_RUNTIME_LIBS_LIST)) $(located_ARMLIBS)
else
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(IMPORTLIBPATH)/,$(LIBRARIES)) $(addprefix $(RUNTIME_LIBS_PATH)/,$(REDUCED_RUNTIME_LIBS_LIST)) $(located_ARMLIBS)
endif

else
# NORMAL
#
ifeq ($(VARIANTTYPE),udeb)
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(IMPORTLIBPATH)/,$(LIBRARIES_DEBUG))
else
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(IMPORTLIBPATH)/,$(LIBRARIES))
endif
ifeq ($(HAS_DEDICATED_OP_NEWDEL_LIB),1)
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(RUNTIME_LIBS_PATH)/,$(NEWLIB))
endif
e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(RUNTIME_LIBS_PATH)/,$(RUNTIME_LIBS_LIST)) $(addprefix $(STATIC_LIBS_PATH)/,$(STATIC_LIBS_LIST)) $(located_ARMLIBS)

endif
else
# ARM RUNTIME LIBS
ifeq ($(VARIANTTYPE),udeb)
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(IMPORTLIBPATH)/,$(LIBRARIES_DEBUG)) $(located_ARMLIBS)
else
  e32abiv2_LIBS:=$(e32abiv2_LIBS) $(addprefix $(IMPORTLIBPATH)/,$(LIBRARIES)) $(located_ARMLIBS)
endif
endif

# NOTE: the groupin10 macro must be used before a call to the "startrule" macro
# because the code between startrule and endrule is packaged up into one
# commandline which would defeat the purpose of groupin10.
# This is undesirable because viafile generation commands appear
# outside the relevant tags but it is also unavoidable.

ifeq ($(e32link_mk),)
  e32link_mk:=1
  include $(FLMHOME)/e32link.mk
endif

# Some configurations inject exports into the final binary by creating a .lib.exp file that is then fed to
# the linker.  How this .lib.exp is generated depends on whether a .def file is listed to control the build
# or not.  Either way, the .lib.exp is guarded so as to only be generated once.
ifneq ($(FIX_EXPORTS_USING_EXP_FILE),)
  BUILDMARKER_EXPFILE:=$(call sanitise,EXPFILE_$(TARGET).lib.exp)
  ifeq ($(DEFFILE),)
    ifneq ($(AUTOEXPORTS),)     
      ifeq ($($(BUILDMARKER_EXPFILE)),)
        $(eval $(call e32link_genlibexpfile,exports))
        $(eval $(BUILDMARKER_EXPFILE):=$(INTERMEDIATEPATH)/$(TARGET).lib.exp)
      endif
    endif
  else
    ifeq ($($(BUILDMARKER_EXPFILE)),)
      $(eval $(call e32link_genlibexpfile,deffile))
      $(eval $(BUILDMARKER_EXPFILE):=$(INTERMEDIATEPATH)/$(TARGET).lib.exp)
    endif
  endif
  ADDITIONAL_LIBS:=$($(BUILDMARKER_EXPFILE))
endif

ifeq ($(e32postlink_mk),)
  e32postlink_mk:=1
  include $(FLMHOME)/e32postlink.mk
endif

define linktarget_func
## The actual link target, dependencies and build step
$(E32TARGET): $(POSTLINKDEFFILE) $(POSTLINKER) $(if $(MULTIFILE_ENABLED),$(MULTIFILEOBJECT) $(CIAFILES_LINKOBJECTS),$(LINKOBJECTS)) $(e32abiv2_LIBS) $(ADDITIONAL_LIBS) $(LINKER_ENTRYPOINT_LIBDEP) $(if $(SUPPORTS_STDCPP_NEWLIB),$(CHECKLIB)) $(if $(LINKERFEEDBACK_STAGE2),$(FEEDBACKFILE),) $(if $(HAVE_ORDERONLY),|,) $(EPOCROOT)/epoc32/build/TEM_LIB
	$(if $(MULTIFILE_ENABLED),,@echo -n "" > $(VIAFILE);
	$(call groupin10,$(LINKOBJECTS)) ;)
	$(call startrule,linkandpostlink) \
	$(if $(PERTURBSTARTTIME),$(RANSLEEP) $(PERTURBMSECS) ;,) \
	$(if $(SUPPORTS_STDCPP_NEWLIB),$(if $(located_STATICLIBRARIES),$(CHECKLIB) $(CHECKLIB_TYPE) --elf $(call dblquote,$(located_STATICLIBRARIES)) &&,),) \
	$(LD) $(LINKER_MISC_FLAGS) $(LINKER_DEFAULT_LIB_PATHS) $(SYMBIAN_LINK_FLAGS) $(if $(DEBUG_INFO),$(LINKER_DEBUG_OPTION),$(LINKER_NODEBUG_OPTION)) \
	  $(if $(ARMLIBS),$(LD_WARNINGS_SUPPRESSION_ARMLIBS),) \
	  $(if $(findstring EXE,$(POSTLINKTARGETTYPE)),$(if $(TREAT_EXES_AS_SHARED),$(SHARED_OBJECT_OPTION),),$(SHARED_OBJECT_OPTION)) \
	  $(SPLIT_OPTION) \
	  $(RW_BASE) \
	  $(LINKER_ARCH_OPTION) \
	  $(SYMVER_OPTION) \
	  $(if $(SO_NAME_OPTION),$(SO_NAME_OPTION)=$(call dblquote,$(LINKASVERSIONED)),) \
	  $(LINKER_ENTRY_OPTION)=$(LINKER_ENTRYPOINT_SETTING) \
	  $(if $(NEED_ENTRYPOINT_LIBRARY),$(LINKER_ENTRYPOINT_LIBDEP),) \
	  $(if $(ADDITIONAL_LIBS),$(call dblquote,$(ADDITIONAL_LIBS)),) \
	  -o $$(call dblquote,$(LINK_TARGET)) \
	  $(if $(LTCG),$(LTCG_OPTION),) \
	  $(LINKER_SYMBOLS_OPTION) $(LINKER_SYMBOLS_FILE_OPTION)=$(call dblquote,$(MAPFILE)) \
  	  $(LINKEROPTION) \
	  $(if $(MULTIFILE_ENABLED),$(call dblquote,$(MULTIFILEOBJECT) $(CIAFILES_LINKOBJECTS)),$(COMMANDFILE_OPTION)$(call dblquote,$(VIAFILE))) \
      $(if $(GENERATELINKERFEEDBACK),$(FEEDBACK_OPTION)$(call dblquote,$(FEEDBACKFILE))) \
	  $(if $(LINKER_ADD_STATIC_RUNTIME),$(if $(STATIC_RUNTIME_LIB),$(LINKER_GROUP_START_OPTION) $(STATIC_RUNTIME_DIR)/$(STATIC_RUNTIME_LIB) $(LINKER_GROUP_END_OPTION),)) \
	  $(call dblquote,$(e32abiv2_LIBS)) $(LINKER_DEFAULT_LIBS) && \
	$(call e32postlink_$(BASE_ARCH)) \
	  $(if $(SAVESPACE),$(if $(EXPORTUNFROZEN),,&& { $(GNURM) -rf $(INTERMEDIATEPATH); true; })) \
	$(call endrule,linkandpostlink)

$(MAPFILE): $(E32TARGET)
$(LINK_TARGET): $(E32TARGET)
endef
ifneq ($(DOPOSTLINK),)
$(eval $(linktarget_func))
endif # ifneq ($(DOPOSTLINK),)

CLEANTARGETS:=$(CLEANTARGETS) $(VIAFILE) $(if $(GENERATELINKERFEEDBACK),$(FEEDBACKFILE)) $(if $(MULTIFILE_ENABLED),$(MULTIFILEOBJECT))
WHATRELEASE:=$(WHATRELEASE) $(MAPFILE)

endif # if TARGETTYPE lib


## Run trace compiler ##############################################
# The following variable defines a prereq that source code will 
# depend on so that tracing happens before compilation.  Must be 
# blank by default so that if tracing is off then there will be
# no dependency.  The tracecompiler code will set it if this
# project actually does depend on trace-generated headers:
TRACE_THISCOMPONENT_ALLRULE:=

# Tracing requires a UID to make uniquely numbered trace points
ifeq ($(UID3),)
 ifeq ($(UID2),)
  USE_TRACE_COMPILER:=
 else
  UID_TC:=$(UID2)
 endif
else
 UID_TC:=$(UID3)
endif

# USE_TRACE_COMPILER defaults to blank in Raptor config.
# Users can turn TC on by setting it to 1 in user config.
ifneq ($(USE_TRACE_COMPILER),)
  # TARGETEXT is already set
  include $(FLMHOME)/tracecompiler.mk
  WHATRELEASE:=$(WHATRELEASE) $(TRACE_DICTIONARY) $(AUTOGEN_HEADER)
endif
###################################################################


##
CC_CPPONLY_ARGS:=$(SYMBIAN_CCFLAGS) $(if $(DEBUG_INFO),-g) $(DEBUG_FORMAT) \
  $(RUNTIME_SYMBOL_VISIBILITY_OPTION) $(EXCEPTIONS) \
  $(CC_WARNINGS_CONTROL_OPTION) $(CC_ERRORS_CONTROL_OPTION) \
  $(TARGET_ARCH_OPTION) $(ENUM_OPTION) $(OWN_LIBRARY_OPTION) $(FPMODE_OPTION) \
  $(EXPORT_VTBL_OPTION) $(NO_UNALIGNED_ACCESS) $(VFE_OPTION) $(AAPCS_OPTION) \
  $(CPPONLYOPTION) $(INSTRUCTION_SET) \
  $(if $(ALWAYS_BUILD_AS_ARM),$(ARM_INSTRUCTION_SET),$(THUMB_INSTRUCTION_SET) $(call makemacrodef,-D,$(COMPILER_THUMB_DEFINES))) \
  $(COMPILER_FPU_OPTION)$(if $(ARMFPU),$(ARMFPU),$(COMPILER_FPU_DEFAULT))

## COMPILE CPP Files #################################################################

# For ARMCC we can compile all sourcefiles with one invocation
# The pathprep macro is used to make sure that forward slashes in options
# are not interpreted as being paths by CYGWIN on Windows.  On windows
# pathprep makes a forward slash into two.

# The majority of ARMCC arguments are common across all compiler invocations
# Order is significant here in that OPTION_REPLACE here and in ABLD should
# have the same impact
CC_CORE_ARGS:=$(SYMBIAN_CCFLAGS) $(if $(DEBUG_INFO),-g) $(DEBUG_FORMAT) \
  $(RUNTIME_SYMBOL_VISIBILITY_OPTION) $(EXCEPTIONS) \
  $(CC_WARNINGS_CONTROL_OPTION) $(CC_ERRORS_CONTROL_OPTION) \
  $(TARGET_ARCH_OPTION) $(ENUM_OPTION) $(OWN_LIBRARY_OPTION) $(FPMODE_OPTION) \
  $(EXPORT_VTBL_OPTION) $(NO_UNALIGNED_ACCESS) $(VFE_OPTION) $(AAPCS_OPTION) \
  $(COMPILE_ONLY_OPTION) $(INSTRUCTION_SET) \
  $(if $(ALWAYS_BUILD_AS_ARM),$(ARM_INSTRUCTION_SET),$(THUMB_INSTRUCTION_SET) $(call makemacrodef,-D,$(COMPILER_THUMB_DEFINES))) \
  $(COMPILER_FPU_OPTION)$(if $(ARMFPU),$(ARMFPU),$(COMPILER_FPU_DEFAULT))

ifeq ($(STDCPP),1)
SYSTEMINCLUDE:=$(SYSTEMINCLUDE) $(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(STDCPP_INCLUDE)))
endif

define option_replace
  # Process a single, combined, item of the form 'search<->replace' in order to modify the command line tool call
  # We split this into its component arguments for use in substitutions
  # Spaces will have been escaped elsewhere to maintain distinct words, so we resurrect these
  # after the split.
  SEARCH:=$(subst %20,$(CHAR_SPACE),$(word 1,$(subst <->,$(CHAR_SPACE),$(1))))
  REPLACE:=$(subst %20,$(CHAR_SPACE),$(word 2,$(subst <->,$(CHAR_SPACE),$(1))))

  # Depending on whether there's a wildcard in the search, we may require either a normal $(subst) or a $(patsubst)
  PATSUBST:=$$(if $$(findstring %,$$(SEARCH)),1,)

  ifeq ($$(PATSUBST),1)
    CC_CORE_ARGS:=$$(patsubst $$(SEARCH),$$(REPLACE),$$(CC_CORE_ARGS))
  else
    CC_CORE_ARGS:=$$(subst $$(SEARCH),$$(REPLACE),$$(CC_CORE_ARGS))
  endif
endef
$(foreach ITEM,$(OPTION_REPLACE_COMPILER),$(eval $(call option_replace,$(ITEM))))

define e32abiv2_compile

$(eval DEPENDFILENAME:=$(1).d)
$(eval DEPENDFILE:=$(wildcard $(DEPENDFILENAME)))

# $4 is for language specific options (e.g. C++ vs C)
$(1): $(2) $(PROJECT_META) $(if $(MULTIFILE_ENABLED),,$(if $(DEPENDFILE),,RESOURCE BITMAP EXPORT)) $(if $(LINKERFEEDBACK_STAGE2),$(FEEDBACKFILE),) | $(TRACE_THISCOMPONENT_ALLRULE) 
	$(call startrule,compile,,$(2))		\
		$(if $(PERTURBSTARTTIME), $(RANSLEEP) $(PERTURBMSECS) ;,) \
		$(if $(MULTIFILE_ENABLED), echo $(2) $(3) > $(MULTIFILE_VIAFILE) ;,) \
		$(CC) $(LICENSERETRY_OPTION) \
			$(CC_CORE_ARGS) \
			$(OPTION_COMPILER) $(if $(MULTIFILE_ENABLED),$(4),$(3)) \
			$(if $(LTCG),$(LTCG_OPTION),) \
			$(if $(USE_PROFILER_FEEDBACK),--profile=$(call dblquote,$(ARM_PROFILER_FILE)),) \
			$(call makemacrodef,-D,$(COMPILER_INTERWORK_DEFINES) $(CDEFS))				\
			$(if $(PREINCLUDE),$(PREINCLUDE_OPTION) ,)$(call concat, $(PREINCLUDE_OPTION) ,$(call dblquote,$(PREINCLUDE)))\
			$(if $(SET_ARMINC),$(if $(RVCTINC),$(COMPILER_SYSTEM_INCLUDE_OPTION)$(call dblquote,$(RVCTINC)),),)       \
			$(COMPILER_SYSTEM_INCLUDE_OPTION)$$(call dblquote,$$(<D))                                                      \
			$(if $(USERINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(USERINCLUDE)))      \
			$(if $(SYSTEMINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(SYSTEMINCLUDE)))  \
			$(if $(NOHIDEALL),$(COMPILER_NO_HIDE_ALL_OPTION),) \
			$(if $(NO_DEPEND_GENERATE),,$(DEPEND_OPTION) $(call dblquote,$(1).d)) \
			$(if $(LINKERFEEDBACK_STAGE2),$(FEEDBACK_OPTION)$(call dblquote,$(FEEDBACKFILE))) \
			$(if $(MULTIFILE_ENABLED),--multifile $(OUTPUT_OPTION) $(MULTIFILEOBJECT) \
			--via $$(call dblquote, $(MULTIFILE_VIAFILE)),$(OUTPUT_OPTION) $$@ $$(call dblquote, $$<)) $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(call endrule,compile)

ifeq ($(NO_DEPEND_GENERATE),)
  CLEANTARGETS:=$$(CLEANTARGETS) $(DEPENDFILENAME)
endif

ifneq ($(DEPENDFILE),)
  ifeq ($(NO_DEPEND_INCLUDE),)
    ifeq ($(filter %CLEAN,$(call uppercase,$(MAKECMDGOALS))),)
      -include $(DEPENDFILE)
    endif
  endif
endif

# individual source file compilation
SOURCETARGET_$(call sanitise,$(2)): $(1)

endef

# Evaluate .cpp and .c files in one go for multifile, cannot do in separate steps since we have the same target.
# This implementation means the .c files will always get put at the end of the .via file. Maybe there is a better way to do this?
$(if $(MULTIFILE_ENABLED),$(eval $(call e32abiv2_compile,$(MULTIFILEOBJECT),$(CPPFILES),$(CFILES),$(CPP_LANG_OPTION))),$(foreach F,$(CPPFILES),$(eval $(call e32abiv2_compile,$(call mapcpp2object,$(F)),$(F),$(CPP_LANG_OPTION)))))
$(if $(MULTIFILE_ENABLED),,$(foreach F,$(CFILES),$(eval $(call e32abiv2_compile,$(call mapc2object,$(F)),$(F),$(C_LANG_OPTION)))))
ifneq ($(TRANSFORM_CIA),1)
  $(if $(MULTIFILE_ENABLED),,$(foreach F,$(CIAFILES),$(eval $(call e32abiv2_compile,$(call mapcia2object,$(F)),$(F),$(CPP_LANG_OPTION) $(COMPILER_CIA_FLAGS)))))
endif

CLEANTARGETS:=$(CLEANTARGETS) $(if $(MULTIFILE_ENABLED),$(MULTIFILE_VIAFILE) $(MULTIFILEOBJECT),$(CPPFILES_LINKOBJECTS) $(CFILES_LINKOBJECTS) $(CIAFILES_LINKOBJECTS)) $(if $(GENERATELINKERFEEDBACK),$(FEEDBACKFILE))

## Listing target ###################################################
# Very similar to compile, apart from the extra flags passed to the
# compile and different output options

define map2listfile
$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(CPPFILEEXTENSIONS) $(CFILEEXTENSIONS),.lis,$1))
endef


define e32abiv2_cpponly
# $1 is the sourcefile

$(eval CPPONLYTARGET:=$(strip $(call extractandmap,$(CPPFILEEXTENSIONS) $(CFILEEXTENSIONS),.$(subst _,.,$(call sanitise,$(FULLVARIANTPATH))).pre,$1)))

CPPONLY:: $(CPPONLYTARGET)

$(CPPONLYTARGET): $(1) $(PROJECT_META)  $(if $(DEPENDFILE),,RESOURCE BITMAP EXPORT)
	$(call startrule,e32cpponly,,$(1))		\
		$(if $(PERTURBSTARTTIME), $(RANSLEEP) $(PERTURBMSECS) ;,) \
		$(CC) $(LICENSERETRY_OPTION) $(SYMBIAN_CCFLAGS) \
			$(CC_CPPONLY_ARGS) \
			$(OPTION_COMPILER) 						\
			$(call makemacrodef,-D,$(COMPILER_INTERWORK_DEFINES) $(CDEFS))				\
			$(if $(PREINCLUDE),$(PREINCLUDE_OPTION) ,)$(call concat, $(PREINCLUDE_OPTION) ,$(call dblquote,$(PREINCLUDE)))\
			$(if $(SET_ARMINC),$(if $(RVCTINC),$(COMPILER_SYSTEM_INCLUDE_OPTION)$(call dblquote,$(RVCTINC)),),)       \
			$(COMPILER_SYSTEM_INCLUDE_OPTION)$$(call dblquote,$$(<D))                                                   \
			$(if $(USERINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(USERINCLUDE)))      \
			$(if $(SYSTEMINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(SYSTEMINCLUDE)))  \
			$(if $(NOHIDEALL),$(COMPILER_NO_HIDE_ALL_OPTION),) \
			$$(call dblquote, $$<) $(OUTPUT_OPTION) $$(@) $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(call endrule,e32cpponly)

CLEANTARGETS:=$$(CLEANTARGETS) $(CPPONLYTARGET)
endef

ifneq ($(filter CPPONLY,$(call uppercase,$(MAKECMDGOALS))),)
$(foreach F,$(CPPFILES) $(CFILES),$(eval $(call e32abiv2_cpponly,$(F))))
endif

define e32abiv2_listing
# $1 is the sourcefile

$(eval LISTINGTARGET:=$(strip $(call extractandmap,$(CPPFILEEXTENSIONS) $(CFILEEXTENSIONS),.$(subst _,.,$(call sanitise,$(FULLVARIANTPATH))).$(TARGET).$(TARGETEXT).lst,$1)))
$(eval DEPENDFILENAME:=$(call map2listfile,$1).d)
$(eval DEPENDFILE:=$(wildcard $(DEPENDFILENAME)))


LISTING:: $(LISTINGTARGET)

$(LISTINGTARGET): $(1) $(PROJECT_META)  $(if $(DEPENDFILE),,RESOURCE BITMAP EXPORT)
	$(call startrule,e32listing,,$(1))		\
		$(if $(PERTURBSTARTTIME), $(RANSLEEP) $(PERTURBMSECS) ;,) \
		$(CC) $(LICENSERETRY_OPTION) $(SYMBIAN_CCFLAGS) \
			$(CC_CORE_ARGS) \
			$(LISTING_OPTION)		            	\
			$(OPTION_COMPILER) 						\
			$(call makemacrodef,-D,$(COMPILER_INTERWORK_DEFINES) $(CDEFS))				\
			$(if $(PREINCLUDE),$(PREINCLUDE_OPTION) ,)$(call concat, $(PREINCLUDE_OPTION) ,$(call dblquote,$(PREINCLUDE)))\
			$(if $(SET_ARMINC),$(if $(RVCTINC),$(COMPILER_SYSTEM_INCLUDE_OPTION)$(call dblquote,$(RVCTINC)),),)       \
			$(COMPILER_SYSTEM_INCLUDE_OPTION)$$(call dblquote,$$(<D))                                                   \
			$(if $(USERINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(USERINCLUDE)))      \
			$(if $(SYSTEMINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$(call dblquote,$(SYSTEMINCLUDE)))  \
			$(if $(NOHIDEALL),$(COMPILER_NO_HIDE_ALL_OPTION),) \
			$(if $(NO_DEPEND_GENERATE),,$(DEPEND_OPTION) $(call dblquote,$(DEPENDFILENAME))) \
			$$(call dblquote, $$<) $(OUTPUT_OPTION) $$(@) $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(call endrule,e32listing)

CLEANTARGETS:=$$(CLEANTARGETS) $(LISTINGTARGET)

ifeq ($(NO_DEPEND_GENERATE),))
  CLEANTARGETS:=$$(CLEANTARGETS) $(DEPENDFILENAME)
endif

ifneq ($(DEPENDFILE),)
  ifeq ($(NO_DEPEND_INCLUDE),)
    ifeq ($(filter %CLEAN,$(call uppercase,$(MAKECMDGOALS))),)
      -include $(DEPENDFILE)
    endif
  endif
endif

endef

# No point at all in generating listing targetsif we aren't going to make them
ifneq ($(filter LISTING,$(call uppercase,$(MAKECMDGOALS))),)
$(foreach F,$(CPPFILES) $(CFILES),$(eval $(call e32abiv2_listing,$(F))))
endif



# Function to execute FREEZE ###########################################
ifneq ($(SUPPORT_FREEZE),)

# Fivespaces variable created to ensure a suitable gap of space characters
# Is placed between the separate arguments. This fixes a problem in Cygwin, where
# separate arguments are interpreted as a single argument when passed to bash
FIVESPACES=$(BLANK)     $(BLANK)

FREEZEGUARD:=TARGET_$(TARGET)_$(TARGETEXT)_$(IMPORTLIBPATH)_EFREEZE

define e32freeze

FREEZE:: $(1)
	$(call startrule,freeze,,$(RESOLVED_DEFFILE)) \
	$(EFREEZE) $(EFREEZE_REMOVE_OPTION) "$(RESOLVED_DEFFILE)" $(FIVESPACES) $(call dblquote,$(GENERATED_DEFFILE)) \
	$(call endrule,freeze)
endef

# Only freeze once - udeb and urel cannot differ
ifeq ($($(FREEZEGUARD)),)
  # For most freezing activity we need the temporary .def file generated in the final post-link
  # that lists the current exports - FREEZE can therefore be dependent on the final post-linked binary,
  # with the side-effect that a build is triggered if someone tries to freeze without having built.
  #
  # However, there's one case where we don't want to be dependent on the post-linked binary in this way,
  # and that's when (a) there are missing exports, (b) the user's aware of them and (c) they're deliberately freezing to
  # remove them using EFREEZE's remove option.  Being dependent on the post-linked binary in this case, where POSTLINKER
  # actually fails to generate a final binary, would mean that the freeze would never happen and post-linking would
  # just be continually re-attempted (to fail each time).
  #
  # So, as a special case, if the user is explicitly attempting to freeze and perform removals, we make FREEZE dependent
  # on the temporary .def file instead.  This has no rule to actually make it, but gives a hint as to what is wrong if
  # the users performs a freeze with remove without having explicitly built previously.
  #
  ifneq ($(EFREEZE_REMOVE_OPTION),)
    $(eval $(call e32freeze,$(GENERATED_DEFFILE)))
  else
    $(eval $(call e32freeze,$(E32TARGET)))
  endif
  $(FREEZEGUARD):=1
endif

endif

CLEANTARGETS:=$(CLEANTARGETS) $(if $(MULTIFILE_ENABLED),$(MULTIFILEOBJECT),$(CPPFILES_LINKOBJECTS) $(CFILES_LINKOBJECTS))

## ASSEMBLER FILES ###################################################################
# CIA VERSION      ############################################
define mapcia2xxx
$(call relocatefiles,$(INTERMEDIATEPATH),$(call extractandmap,$(CIAFILEEXTENSIONS),$2,$1))
endef

define e32abiv2_CIA2CPP

$(eval e32abiv2_OFILE:=$(call mapcia2xxx,$(1),_.o))
$(eval e32abiv2_PREFILE:=$(call mapcia2xxx,$(1),_.pre))
$(eval e32abiv2_CPPFILE:=$(call mapcia2xxx,$(1),_.cpp))
$(eval CLEANTARGETS:=$(CLEANTARGETS) $(e32abiv2_OFILE) $(e32abiv2_CPPFILE) $(e32abiv2_PREFILE))

$(e32abiv2_OFILE): $(e32abiv2_CPPFILE) $(PROJECT_META)
	$(call startrule,cia2cpp2o,,$(e32abiv2_CPPFILE)) \
		$(if $(PERTURBSTARTTIME),$(RANSLEEP) $(PERTURBMSECS) ;,) \
			$(CC) $(LICENSERETRY_OPTION) \
			$(CC_CORE_ARGS) \
			$(if $(LTCG),$(LTCG_OPTION),) \
			$(OPTION_COMPILER) \
			$(call makemacrodef,-D,$(COMPILER_INTERWORK_DEFINES) $(CDEFS) $(CIADEFS)) $(CPP_LANG_OPTION)      \
	 		$(if $(USERINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$$(call dblquote,$(USERINCLUDE)))     \
	 		$(if $(SYSTEMINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$$(call dblquote,$(SYSTEMINCLUDE))) \
	 		$$(call dblquote, $$<) $(OUTPUT_OPTION) $$@ $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(call endrule,cia2cpp2o)


# preprocessed CIA file to a CPP file
$(e32abiv2_CPPFILE): $(e32abiv2_PREFILE)
	$(call startrule,tranasm) \
	$(if $(CPPFILT),CPPFILT="$(CPPFILT)",) \
	$(TRANASM) --suppress-check --output="$$@" $$^ \
	$(call endrule,tranasm)

$(eval DEPENDFILENAME:=$(e32abiv2_PREFILE).d)
$(eval DEPENDFILE:=$(wildcard $(DEPENDFILENAME)))

# preprocess the cia file
$(eval e32abiv2_PREFILE_OPTIONS:= $(LICENSERETRY_OPTION) $(PREPROCESSOR_OPTION) $(CPP_OPTION) \
       $(SYMBIAN_CCFLAGS) $(call makemacrodef,-D,$(COMPILER_INTERWORK_DEFINES) $(CDEFS) $(CIADEFS)) $(CPP_LANG_OPTION) \
       $(if $(PREINCLUDE),$(PREINCLUDE_OPTION) ,)$$(call concat, $(PREINCLUDE_OPTION) ,$$(call dblquote,$(PREINCLUDE))) \
       $(if $(USERINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$$(call dblquote,$(USERINCLUDE))) \
       $(if $(SYSTEMINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$$(call dblquote,$(SYSTEMINCLUDE))) \
       $(if $(ARMINC),$(if $(RVCTINC), $(COMPILER_SYSTEM_INCLUDE_OPTION)$$(call dblquote,$(RVCTINC)),),) )


$(e32abiv2_PREFILE): $1 $(PROJECT_META) $(if $(DEPENDFILE),,RESOURCE BITMAP EXPORT)
	$(call startrule,cia2cpp,,$1) \
	$(if $(PERTURBSTARTTIME),$(RANSLEEP) $(PERTURBMSECS) ;,) \
	$(CC) $(e32abiv2_PREFILE_OPTIONS) $(OUTPUT_OPTION) $$@ $$(call dblquote,$1) $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(if $(NO_DEPEND_GENERATE),,&& $(CC) -M $(e32abiv2_PREFILE_OPTIONS) --depend_format=unix $(OUTPUT_OPTION) $$@ $$(call dblquote,$1) > $(call dblquote,$(e32abiv2_PREFILE).d)) \
	$(call endrule,cia2cpp)

ifeq ($(NO_DEPEND_GENERATE),)
  CLEANTARGETS:=$$(CLEANTARGETS) $(DEPENDFILENAME)
endif

ifneq ($(DEPENDFILE),)
  ifeq ($(NO_DEPEND_INCLUDE),)
    ifeq ($(filter %CLEAN,$(call uppercase,$(MAKECMDGOALS))),)
      -include $(DEPENDFILE)
    endif
  endif
endif

endef

# Create a rule for each cia file
ifeq ($(TRANSFORM_CIA),1)
  $(eval $(foreach e32abiv2_RULE,$(CIAFILES),$(call e32abiv2_CIA2CPP,$(e32abiv2_RULE))))
endif

# Pure assembler (.s files) ################################

e32abiv2_asm_OPTIONS:=$(LICENSERETRY_OPTION) \
  $(CC_CORE_ARGS) \
  $(OPTION_COMPILER) \
  $(call makemacrodef,-D,$(COMPILER_INTERWORK_DEFINES) $(CDEFS)) \
  $(if $(USERINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$$(call dblquote,$(USERINCLUDE)))     \
  $(if $(SYSTEMINCLUDE),$(COMPILER_SYSTEM_INCLUDE_OPTION),)$$(call concat, $(COMPILER_SYSTEM_INCLUDE_OPTION),$$(call dblquote,$(SYSTEMINCLUDE)))

# note that the --no_rtti option cannot be passed with the -M option
# so forcibly remove it when generating ASM dependencies.
#
define e32abiv2_asm

$(eval DEPENDFILENAME:=$(1).d)
$(eval DEPENDFILE:=$(wildcard $(DEPENDFILENAME)))

$(1): $(2) $(PROJECT_META) $(if $(DEPENDFILE),,RESOURCE BITMAP EXPORT)
	$(call startrule,asmcompile,,$(2)) \
		$(if $(PERTURBSTARTTIME),$(RANSLEEP) $(PERTURBMSECS) ;,) \
		$(CC) $(e32abiv2_asm_OPTIONS) \
		$(if $(NO_DEPEND_GENERATE),,$(DEPEND_OPTION) $(call dblquote,$(DEPENDFILENAME))) \
	 	$$(call dblquote, $$<) $(OUTPUT_OPTION) $$@ $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(call endrule,asmcompile)
ifeq ($(NO_DEPEND_GENERATE),)
	$(call startrule,asmdependencies) \
		$(CC) -M $(subst --no_rtti,,$(e32abiv2_asm_OPTIONS)) --depend_format=unix \
	  	$(OUTPUT_OPTION) $$@ $$(call dblquote,$2) > $(call dblquote,$(DEPENDFILENAME)) $(if $(USE_RVCT22_DELETE_WORKAROUND),$(RVCT22_DELETE_WORKAROUND)) \
	$(call endrule,asmdependencies)
endif

ifeq ($(NO_DEPEND_GENERATE),)
  CLEANTARGETS:=$$(CLEANTARGETS) $(DEPENDFILENAME)
endif

ifneq ($(DEPENDFILE),)
  ifeq ($(NO_DEPEND_INCLUDE),)
    ifeq ($(filter %CLEAN,$(call uppercase,$(MAKECMDGOALS))),)
      -include $(DEPENDFILE)
    endif
  endif
endif

CREATABLEPATHS:=$$(CREATABLEPATHS) $(INTERMEDIATEPATH)

endef

$(eval $(foreach F,$(ASMFILES), $(call e32abiv2_asm,$(call mapasm2object,$(F)),$(F))))
CLEANTARGETS:=$(CLEANTARGETS) $(ASMFILES_LINKOBJECTS)

endif # ifneq ($(TARGETTYPE),implib)


########################## Build ROMFILE target ############################

# Only build ROMFILE if asked
ifneq ($(filter ROMFILE,$(call uppercase,$(MAKECMDGOALS))),)
  include $(FLMHOME)/romfile.mk
endif

# Deal with test code batch files generation.
ifneq ($(TESTPATH),)

    CREATABLEPATHS:=$(CREATABLEPATHS) $(EPOCROOT)/epoc32/data/z/test/
    $(eval $(call MakeTestBatchFiles,$(TARGET),$(EPOCROOT)/epoc32/data/z/test/$(MODULE)/$(VARIANTPLATFORM).$(TESTPATH)))
    BATCHFILE_CREATED_$(EPOCROOT)/epoc32/data/z/test/$(MODULE)/$(VARIANTPLATFORM).$(TESTPATH):=1
    TARGET_CREATED_$(EPOCROOT)/epoc32/data/z/test/$(MODULE)/$(VARIANTPLATFORM).$(TESTPATH)_$(TARGET):=1
    WHATRELEASE:=$(WHATRELEASE) $(EPOCROOT)/epoc32/data/z/test/$(MODULE)/$(VARIANTPLATFORM).$(TESTPATH)
endif

###################### End of Build ROMFILE target ######################

# Feature Variation requires a .vmap file to be created for each binary
#
ifneq ($(FEATUREVARIANTNAME),)
ifneq ($(E32TARGET),)

OUTPUTVMAP:=$(E32TARGET).vmap
WHATRELEASE:=$(WHATRELEASE) $(OUPUTVMAP)

TARGET:: $(OUTPUTVMAP)
VMAPNEEDS:=$(E32TARGET) $(SOURCE) $(PROJECT_META)

BV_SOURCELIST:=$(addprefix -s ,$(SOURCE) $(PROJECT_META))
BV_FEATURELIST:=$(addprefix -f ,$(FEATURELISTFILES))
BV_USER_INCLUDES:=$(addprefix -u ,$(USERINCLUDE))
BV_SYSTEM_INCLUDES:=$(addprefix -x ,$(SYSTEMINCLUDE))

# translate double quoted macros because $(shell) messes them up in some make engines
BV_MACROLIST:=$(COMPILER_INTERWORK_DEFINES) $(CDEFS) $(if $(ALWAYS_BUILD_AS_ARM),,$(COMPILER_THUMB_DEFINES))
BV_DEFINES:=$(call makemacrodef,-D,$(subst ",__SBS__QUOTE__,$(BV_MACROLIST)))

# the script to generate our .vmap file and hash value
VMAPCOMMAND:=$(CREATEVMAP) -o $(OUTPUTVMAP) $(BV_FEATURELIST) $(BV_DEFINES) -p $(PREINCLUDE) $(BV_SOURCELIST) $(BV_USER_INCLUDES) $(BV_SYSTEM_INCLUDES) -c $(CREATEVMAPCPP)

# a recipe to create the .vmap from the "sources" with the createvmap script
$(call raptor_recipe,createvmap,$(OUTPUTVMAP),$(VMAPNEEDS),$(VMAPCOMMAND))

endif # E32TARGET != ""
endif # FEATUREVARIANTNAME != ""

########################### CONCLUSION ###################################

# make the output directories while reading makefile - some build engines prefer this
$(call makepath,$(CREATABLEPATHS))

## Clean up
$(call raptor_clean,$(CLEANTARGETS))

# For the --what option and the log file
$(call raptor_release,$(filter-out %.sym,$(WHATRELEASE)))

endif # DOBUILD

## The End