MultiImageListPage.OutputFileLabel=Output file
MultiImageEditorContext.NoMbmsInMMPError=No MBMs defined in MMP at 
MultiImageEditorContext.NoMifsFoundError=No MIFs defined in makefile at 
MultiImageEditorContext.UndoContextLabel=Multi-Image Editor Operations
MultiImageEditorContext.EmptyMBMError=At least one image must be present in MBM files to avoid build-time errors.
MultiImageEditorDialog.EditMifTitle=Edit MBM/MIF Contents
MultiImageEditorDialog.EditMbmTitle=Edit MBM Contents
AddProjectImagesDialog.AddImagesFromProjectTitle=Add Images from Project
AddProjectImagesDialog.AvailableProjectImagesLabel=Available project images:
MultiImageEditorContext.FileNotResolvedError=No backing IFile found for 
MultiImageEditorContext.FailedToOpenMMPError=Failed to open MMP at 
MultiImageEditorDialog.EditMbmMifDescription=Select the source images and the color formats they will take at runtime.  For BMP entries, images and masks may be paired to verify their runtime appearance.  For SVG entries, no separate mask is required.
MultiImageEditorContext.DialogSettingsSection=root
MultiImageEditorContext.BadImageSourceNoTarget=The target file must be non-empty.
MultiImageEditorContext.FailedToOpenMakefileError=Failed to open makefile at 
MultiImageEditorContext.ConflictingChangesTitle=Conflicting changes detected
MultiImageEditorContext.ConflictingChangesMessage=The underlying file ''{0}'' was modified outside the editor.  Cannot save changes.
MultiImageEditorContext.BadImageSourceSameTarget=The target file is the same as another in this context.
MultiImageEditorContext.BadImageSourceSameHeaderPath=This entry will generate a header to the same location as other multi-image source.  One will overwrite the other.  Rename the target file or the generated header to avoid the conflict.
MultiImageEditorContext.BadImageSourceSameHeaderName=This entry will generate a header with the same filename as other multi-image source.  This is probably an error.  Rename the target file or the generated header to avoid the conflict.
MultiImageEditorContext.ModifyImageSourceCommandLabel=Modify ''{0}''
MultiImageEditorContext.InvalidFilenameEnumeratorWarning=The filename ''{0}'' is invalid, since the bmconv or mifconv tool will generate an illegal enumerator.  Please rename the image.
ImageFormatControls.ColorDepthLabel=Color depth:
ImageFormatControls.ColorDepthComboTooltip=Select the bit depth used to encode the image at build time
ImageSourceTable.FormatColumnHeader=Format
ImageSourceTable.FormatColumnHeaderTooltip=Shows the canonical format for the image ('c' for color or nothing for grayscale, then image bit depth, and optionally mask bit depth)
ImageSourceTable.SplitImgMaskButton=Split Image and Mask
ImageSourceTable.CopyEnumsMenuLabel=Copy Enumerators
ImageSourceTable.RemoveImagesCommand=remove images
ImageSourceTable.RemoveButtonTooltip=Remove image entries from the table (does not delete files)
ImageSourceTable.UpButton=Up
ImageSourceTable.UpButtonTooltip=Move the selected image entry or entries up one position
ImageSourceTable.DownButton=Down
ImageSourceTable.DownButtonTooltip=Move the selected image entry or entries down one position
ImageSourceTable.RemoveButton=Remove
ImageSourceTable.ImportButton=Import...
ImageSourceTable.ThumbColumnHeader=Thumb
ImageSourceTable.ThumbColumnHeaderTooltip=Shows a thumbnail of the image (paired with mask, if present)
ImageSourceTable.FilesColumnHeader=Files
ImageSourceTable.FilesColumnHeaderTooltip=Shows the files which compose an entry. Edit these with the command buttons.
ImageSourceTable.EnumeratorsColumn=Enumerators
ImageSourceTable.EnumeratorsColumnHeaderTooltip=Shows the enumerators which will access the image (pair) in source. You may copy these via the context menu.
ImageSourceTable.PairImgMaskButton=Pair Image and Mask
ImageSourceTable.SwapImgMaskButton=Swap Image and Mask
ImageSourceTable.AddImagesCommand=add images
ImageSourceTable.AddFromProjectButton=Add From Project
ImageSourceTable.AddFromProjectButtonTooltip=Add entries referencing available images in the project
ImageSourceTable.ReorderImagesCommand=reorder images
ImageSourceTable.AddFromFilesystemButton=Add From Filesystem
ImageSourceTable.AddFromFilesystemButtonTooltip=Add entries referencing available images in the filesystem, optionally copying them into the project
ImageSourceTable.PairImgMaskCommandLabel=Pair Image and Mask
ImageSourceTable.PairImgMaskButtonTooltip=Combines adjacent unpaired BMP image entries together into image/mask pairs
ImageSourceTable.SplitImgMaskCommandLabel=Split Image and Mask
ImageSourceTable.SplitImgMaskButtonTooltip=Splits paired BMP image entries into image/mask entries
ImageSourceTable.SwapImgMaskCommandLabel=Swap Image and Mask
ImageSourceTable.SwapImgMaskButtonTooltip=Swaps the image and mask files and format information in paired BMP image entries.
ImageFormatControls.MaskDepthLabel=Mask depth:
ImageFormatControls.MaskDepthComboTooltip=Select the bit depth used to encode the mask at build time.\n\nA 1-bit mask treats pixels as "on/off" bits, where black is opaque and white is transparent.\n\nAn 8-bit mask is treated as alpha values, where black is transparent and white is opaque.
ImageFormatControls.ColorFormatLabel=Color format:
ImageFormatControls.ColorFormatTooltip=Encode the image(s) as color
ImageFormatControls.ColorLabel=Color
ImageFileControls.MaskLabel=Mask: 
ImageFileControls.ImageLabel=Image: 
ImageFileControls.MaskWordLabel=mask
ImageFormatControls.GrayscaleLabel=Grayscale
ImageFormatControls.GrayscaleFormatTooltip=Encode the image(s) as grayscale
ImageFileControls.EllipsisButton=...
ImageFileControls.ImageWordLabel=image
ImageFormatControls.SetFromImageButton=Set from image
ImageFormatControls.SetFromImageTooltip=Auto-detect the image depth, mask depth, and color/grayscale setting from the image contents
ImageFileControls.MultiValueComboEntry=---
ImageFileControls.ChangeImagePathCommand=change image path
ImageFileControls.ChangeMaskPathCommand=change mask path
ImageFormatControls.SetFormatFromImageCommand=set format from image
AddImagesDialog.DetectedImagePairsLabel=Detected image pairs:
AddImagesDialog.HelpTextLabel=Help
AddImagesDialog.HelpDescription=Select the image file(s) to add to ''{0}''.\n\nImages already used in the multi-image file or those whose filenames will result in invalid enumerators have been filtered out.\n\nImage and mask pairs will be automatically detected and can be adjusted on the main page.\n
AddImagesDialog.ImageColumnHeader=Image
AddImagesDialog.MaskColumnHeader=Mask
BitDepthsCombo.MixedValueComboEntry=---
BitDepthsCombo.NotApplicable=n/a
PreviewComposite.PreviewLabel=Preview
PreviewComposite.PreviewIconTooltip=A runtime preview of the image
PreviewComposite.CannotLoadImageLabel=Cannot load image
PreviewComposite.ImageDimensionsLabel={0} x {1} pixels
PreviewComposite.UnknownErrorDescription=Unknown cause (file not found or inaccessible?)
SelectImageDialog.SelectImageHelp=Select the image to use as the {0}:
OutputFileParametersComposite.SetHeaderFileGenerationCommand=set header file generation
OutputFileParametersComposite.TargetFileLabel=Target file:
OutputFileParametersComposite.TargetFileTooltip=Specifies the EPOCROOT-relative path for the compiled images
OutputFileParametersComposite.ChangeTargetFileCommand=change target file
OutputFileParametersComposite.SetDefaultFileFileHelp=Sets the default target file based on the SDK and project name
OutputFileParametersComposite.DefaultButton=Default
OutputFileParametersComposite.SetDefaultTargetFileCommand=set default target file
OutputFileParametersComposite.GeneratedHeaderFileTooltip=Shows the generated header file (the path cannot be edited in this context)
OutputFileParametersComposite.HeaderFileLabel=Header file:
OutputFileParametersComposite.HeaderFileTooltip=Specifies the generated file which defines enumerators for the images
OutputFileParametersComposite.SetGeneratedHeaderFileCommand=set generated header file
OutputFileParametersComposite.SetDefaultHeaderFileHelp=Sets the default header file based on the target file name.
OutputFileParametersComposite.SetDefaultGeneratedHeaderFileCommand=set default generated header file
OutputFileParametersComposite.HeaderGenerationLabel=Header generation:
OutputFileParametersComposite.UnnamedTargetFileStub=MBM/MIF Editor
OutputFileParametersComposite.NoHeaderTip=If selected, no .mbg header will be generated.  
OutputFileParametersComposite.NoHeaderLabel=No header
OutputFileParametersComposite.HeaderTip=If selected, an .mbg header will be generated.
OutputFileParametersComposite.HeaderLabel=Header
OutputFileParametersComposite.OnlyHeaderTip=If selected, only the .mbg, and not the .mbm or .mif, will be generated.
OutputFileParametersComposite.OnlyHeaderLabel=Header only
SelectedImagePropertiesComposite.SelectedImagesLabel=Selected Image(s) Properties
SelectedImagePropertiesComposite.ChangeColorDepthsCommand=change color depths
SelectedImagePropertiesComposite.ChangeMaskDepthsCommand=change mask depths
SelectedImagePropertiesComposite.ChangeColorFlagCommand=change color / grayscale flag
DelayedImageLoadingLabelProviderBase.ImageLoadingJobLabel=Image loading job
AIFImageFormatControls.SetColorDepthCommand=Set Color Depth
AIFImageFormatControls.SetMaskDepthCommand=Set Mask Depth
AIFImageFormatControls.SetColorFlagCommand=Set Color Flag
AIFEditorListPage.AIFDetailsLabel=AIF Details
AIFEditorContext.EmptyTargetError=Target file must not be empty.\n
AIFEditorContext.SameTargetFilePathError=The target file has the same path as another in the project.\n
AIFSourceTable.AddFilesystemImagesCommand=Add Filesystem Images
AIFEditorContext.SameTargetFileError=The target file has the same name as another in the project.\n
AIFEditorContext.EmptyResourceFileError=Resource file must not be empty.\n
AIFEditorContext.BitmapsWithoutColorDepthError=No bitmaps should be provided if color depth is not set.\n
AIFEditorContext.NeedOneBitmapError=At least one bitmap entry is required when color depth is set.
AIFEditorContext.NoPairedImageMaskError=Entry does not have paired image and mask: {0}\n
AIFEditorContext.NeedMaskDepthWarning=Mask depth should be set (the build tools will assume that adjacent images are bitmap/mask pairs regardless).\n
AIFSourceTable.AddProjectImagesCommand=Add Project Images
AIFImagePropertiesComposite.SharedImagePropertiesLabel=Shared Image Properties
AIFOutputFileParametersComposite.ResourceFilePathLabel=Resource file path:
AIFOutputFileParametersComposite.TargetFileLabel=Target file:
AIFOutputFileParametersComposite.TargetFileTooltip=Specify the filename of the compiled AIF file, relative to the target path
AIFOutputFileParametersComposite.DefaultButtonLabel=Default
AIFImagePropertiesComposite.AIFImagePropertiesGroupTooltip=Set the color, depth, and color/grayscale settings, which are shared among all the images
AIFOutputFileParametersComposite.ChangeAIFResourceCommand=Change AIF Resource
AIFEditorDialog.aifTabText=AIF
AIFEditorDialog.outputAIFNameLabel=Output AIF file name:
AIFEditorDialog.EditAIFDescription=Specify the output AIF file, the resource file comprising the AIF definition, and, optionally, a set of application icons.  The OS will pick an icon for the application menu or the context icon based on its size.
AIFEditorDialog.sourcePathGroupLabel=Source path
AIFEditorDialog.aifOutputValidationErr=Please specify the output AIF file name
AIFEditorDialog.rssFilePathLabel=RSS file path:
AIFEditorDialog.bitmapsTabText=Bitmaps
AIFEditorDialog.AIFEditorDialogTitle=Edit Application Information File
AIFEditorDialog.EditAIFTitle=Edit AIF Information
AIFOutputFileParametersComposite.UnnamedTargetFileStub=AIF Editor
AIFEditorContext.InvalidFilenameEnumeratorWarning=The filename ''{0}'' is invalid, since the bmconv or mifconv tool will generate an illegal enumerator.  Please rename the image.
AddFilesystemImagesDialog.CopyingFailedTitle=Copying failed
AddFilesystemImagesDialog.OverwriteFileTitle=File conflict
AddFilesystemImagesDialog.OverwriteFileMessage=Overwrite existing file ''{0}''?
AddFilesystemImagesDialog.SameSourceAndDestinationFilesError=Could not copy file ''{0}'' because the source and destination files are the same.
AddFilesystemImagesDialog.DirectoryLabel=Directory:
AddFilesystemImagesDialog.ProjectLocationLabel=Project location:
AddFilesystemImagesDialog.ChooseButtonLabel=Choose...
AddFilesystemImagesDialog.AddImagesFromFilesystemTitle=Add Images From Filesystem
AddFilesystemImagesDialog.CopyImagesCheckboxLabel=Copy images into project
AddFilesystemImagesDialog.SelectDestinationFolderLabel=Select the destination folder:
AddFilesystemImagesDialog.CopyingFailedDescription=The image copy operation did not fully succeed:\n\n{0}\nThese images will point to their original filesystem location.
AddFilesystemImagesDialog.BrowseLabel=Browse...
AddFilesystemImagesDialog.AvailableDirectoryImagesLabel=Available directory images:
AddFilesystemImagesDialog.OverwriteExistingCheckboxLabel=Overwrite existing
AddImagesDialog.HelpTextLabel=Help
ExportedImageLocationTableComposite.MappingExportedFilesLabel=Mapping for exported files:
ExportedImageLocationTableComposite.DefaultTargetPathLabel=Default target path:
ExportedImageLocationTableComposite.ImageFileNameColumnHeader=Image filename
ExportedImageLocationTableComposite.TargetPathColumnHeader=Target path
ExportedImageLocationTableComposite.TargetFilenameColumnHeader=Target filename
