diff -r 44ff9ba1e1cc -r 6cb072f1aa74 core/com.nokia.carbide.cpp.doc.user/html/tasks/trk/trk_connection_usb.htm --- a/core/com.nokia.carbide.cpp.doc.user/html/tasks/trk/trk_connection_usb.htm Mon Jun 29 16:00:45 2009 -0500 +++ b/core/com.nokia.carbide.cpp.doc.user/html/tasks/trk/trk_connection_usb.htm Mon Jun 29 16:12:23 2009 -0500 @@ -1,55 +1,55 @@ - - - - - - -USB Connectivity Setup - - - -

USB Connection Setup

-

On-device debugging supports the use of USB to debug programs running on a target device. To enable communication with a USB device, a connection must be established between the PC and the device. Doing that requires one of the following USB connectivity cables to physically connect the PC to the device:

- -
-

Setting up a USB Connection for On-device Debugging

-
    -
  1. Install the latest USB connectivity software, for example, S60 devices use Nokia PC Suite
    2. -
  2. Connect the USB connectivity cable to your PC and then the target device
    3. -
  3. For S60 devices, select PC-Suite from the USB Mode list when the target device is connected
    4. -
  4. Download the Application TRK or System TRK SISX file to the device
    5. -
  5. On the PC - (optional)
    6. -
-
    -
      -
    1. Open the Window's Computer Management (Windows XP)
      2. -

      Right-click My Computer and select Manage from the context menu to open the Computer Management window. Select System Tools > Device Manager > Ports (COM & LPT) to display all active ports.

      -
    2. Locate the S60 Phone USB (COMx) item in the list (Figure 2)
      3. -

      -

      Figure 2. Device Manager showing Ports (COM & LPT) section

      -
    3. The USB COM Port number should match the COM port used in the Connections tab of the TRK launch - configuration.
      4. -
    4. Close the Device Manager window
      5. -
    -
-
-
Related concepts
- -
Related references
- -
Related tasks
- - - - - + + + + + + +USB Connectivity Setup + + + +

USB Connection Setup

+

On-device debugging supports the use of USB to debug programs running on a target device. To enable communication with a USB device, a connection must be established between the PC and the device. Doing that requires one of the following USB connectivity cables to physically connect the PC to the device:

+ +
+

Setting up a USB Connection for On-device Debugging

+
    +
  1. Install the latest USB connectivity software, for example, S60 devices use Nokia PC Suite
    2. +
  2. Connect the USB connectivity cable to your PC and then the target device
    3. +
  3. For S60 devices, select PC-Suite from the USB Mode list when the target device is connected
    4. +
  4. Download the Application TRK or System TRK SISX file to the device
    5. +
  5. On the PC + (optional)
    6. +
+
    +
      +
    1. Open the Windows Computer Management (Windows XP)
      2. +

      Right-click My Computer and select Manage from the context menu to open the Computer Management window. Select System Tools > Device Manager > Ports (COM & LPT) to display all active ports.

      +
    2. Locate the S60 Phone USB (COMx) item in the list (Figure 2)
      3. +

      +

      Figure 2. Device Manager showing Ports (COM & LPT) section

      +
    3. The USB COM Port number should match the COM port used in the Connections tab of the TRK launch + configuration.
      4. +
    4. Close the Device Manager window
      5. +
    +
+
+
Related concepts
+ +
Related references
+ +
Related tasks
+ + + + +