|
1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> |
|
2 <html> |
|
3 <head> |
|
4 <meta http-equiv="content-type" content="text/html; charset=iso-8859-1"> |
|
5 <title>Setting up USB serial connection</title> |
|
6 <link href="../../book.css" type="text/css" rel="stylesheet"> |
|
7 </head> |
|
8 <body> |
|
9 |
|
10 <h2>Setting up USB serial connection</h2> |
|
11 <ol> |
|
12 <li>Make sure you have USB cable drivers (such as Nokia Connectivity Cable Drivers for Nokia devices) installed on your PC (either with PC Suite or separately for Nokia devices). The latest version of the drivers is always recommended.</li> |
|
13 <li>In the S60 device, start HtiAdmin by selecting <b>Menu</b> > <b>RnD Tools</b> > <b>HtiAdmin</b>.</li> |
|
14 <li>Stop the HTI Framework if it is running by selecting <b>Options</b> > <b>Stop</b>.</li> |
|
15 <li>Enable USB connection by selecting <b>Options</b> > <b>Comms</b> > <b>Enable USB serial comm</b>.</li> |
|
16 <li>Start the HTI Framework by selecting <b>Options</b> > <b>Start</b>.</li> |
|
17 <li>Connect the device to the PC with a USB cable and select the <b>PC Suite</b> mode. If Windows starts to install drivers, wait for all installations to complete.</li> |
|
18 <li>In the HTI Connection Carbide.c++ Extension, click <img src="../images/run_exc_arrow.png"> and select <b>New Connection</b> to create a new connection, or select an existing connection.</li> |
|
19 <li>In <b>Connection name</b>, enter a name for the connection, and in <b>Connection type</b>, select <b>Serial</b>. To edit the serial port settings, click <b>Next</b>.<br><br><img src="../images/new_connection_1.png"></li> |
|
20 <li>In <b>Serial Port</b>, select the serial port that is used for USB connection. You can also select a baud rate.<br><br><img src="../images/new_connection_2.png"></li> |
|
21 <li>(Optional) To test the connection, click <b>Initiate service testing</b>. The test status is shown in the <b>Status</b> pane: |
|
22 <ul> |
|
23 <li><i>Status not tested</i></li> |
|
24 <li><i>Connection to HTI agent OK, HTI version x.xx</i></li> |
|
25 <li><i>HTI agent in the device is not responding</i></li> |
|
26 <li><i>Connection failed</i></li> |
|
27 </ul> |
|
28 </li> |
|
29 <li>Click <b>Finish</b> to close the wizard. HTI Connection now starts the Datagateway with the connection you configured. If the Datagateway does not start automatically, start it by clicking <img src="../images/run_exc.gif">. The connection status will be displayed in the status line above the console screen: |
|
30 <ul> |
|
31 <li><i>Not connected</i></li> |
|
32 <li><i>Testing connection</i></li> |
|
33 <li><i>Trying to connect to <connection name></i></li> |
|
34 <li><i>Connected to <connection name></i></li> |
|
35 </ul> |
|
36 </li> |
|
37 </ol> |
|
38 |
|
39 <p>In addition to configuring and starting HTI connections, you can do the following:</p> |
|
40 <ul> |
|
41 <li>To stop the Datagateway, click <img src="../images/stop.gif">.</li> |
|
42 <li>To edit the connection settings, click <img src="../images/environment_co.png">.</li> |
|
43 <li>To start a connection after the initial setup, click <img src="../images/run_exc_arrow.png"> and select a connection.</li> |
|
44 <li>To delete a connection, open the <b>Remote Connections</b> view and use the dynamic menu. For details, see <a href="viewing_remote_connections.htm">Viewing remote connections</a>.</li> |
|
45 </ul> |
|
46 |
|
47 <h5>Related tasks</h5> |
|
48 <ul> |
|
49 <li><a href="tasks/viewing_remote_connections.htm">Viewing remote connections</a></li> |
|
50 <li><a href="set_preferences.htm">Editing HTI connection settings</a></li> |
|
51 </ul> |
|
52 |
|
53 <div id="footer">Copyright © 2009 Nokia Corporation and/or its subsidiary(-ies). All rights reserved. |
|
54 License: <a href="http://www.eclipse.org/legal/epl-v10.html">http://www.eclipse.org/legal/epl-v10.html</a>.</div> |
|
55 </body> |
|
56 </html> |