diff -r 7f60f3388609 -r 018264c44c89 htiextension/com.nokia.s60tools.hticonnection.help/html/tasks/comm_bt.htm
--- a/htiextension/com.nokia.s60tools.hticonnection.help/html/tasks/comm_bt.htm Fri Feb 19 10:07:34 2010 +0200
+++ b/htiextension/com.nokia.s60tools.hticonnection.help/html/tasks/comm_bt.htm Thu Mar 04 13:38:40 2010 +0200
@@ -1,63 +1,94 @@
-
-
-
-
-Setting up Bluetooth connection
-
-
-
-
-
Setting up Bluetooth connection
-
-
In the S60 device, start HtiAdmin by selecting Menu> RnD Tools > HtiAdmin.
-
Stop the HTI Framework if it is running by selecting Options > Stop.
-
Enable Bluetooth connection by selecting Options > Comms > Enable BT comm, and then one of the following:
-
-
By BT address to connect to a specified Bluetooth address.
-
By BT name to connect to a specified Bluetooth name.
-
Search when starting to select a Bluetooth connection when you start the HTI connection.
-
-
-
Start the HTI Framework by selecting Options > Start.
-
On the PC, configure and start a Bluetooth serial port service. For instructions on setting up a serial port service on a PC, see the manual of your Bluetooth driver.
-
Before starting the HTI connection, configure the PC’s Bluetooth serial port service not to use Secure Connection. This means that no pairing or authorization is needed when the phone connects to the PC.
-
On the PC, open the HTI Connection Carbide.c++ Extension by selecting Carbide > HTI Connection.
-
Click and select New Connection to create a new connection, or select an existing connection.
-
Configure the HTI connection to use Serial communication. Click Next and check that the HTI settings correspond to the Bluetooth serial port service configured and started earlier.
-
(Optional) To test the connection, click Initiate service testing. The test status is shown in the Status pane:
-
-
Status not tested
-
Connection to HTI agent OK, HTI version x.xx
-
HTI agent in the device is not responding
-
Connection failed
-
-
-
Click Finish to close the wizard. HTI Connection now starts the Datagateway with the connection you configured. If the Datagateway does not start automatically, start it by clicking . The connection status will be displayed in the status line above the console screen:
-
-
Not connected
-
Testing connection
-
Trying to connect to <connection name>
-
Connected to <connection name>
-
-
-
-
-
-
In addition to configuring and starting HTI connections, you can do the following:
-
-
To stop the Datagateway, click .
-
To edit the connection settings, click .
-
To start a connection after the initial setup, click and select a connection.
-
To delete a connection, open the Remote Connections view and use the dynamic menu. For details, see Viewing remote connections.
-
-
-
-
\ No newline at end of file
+
+
+
+
+ Setting up Bluetooth connection
+
+
+
+
+
Setting up Bluetooth connection
+
+
In the S60 device, start HtiAdmin by selecting Menu>
+ RnD Tools > HtiAdmin.
+
Stop the HTI Framework if it is running by selecting Options >
+ Stop.
+
Enable Bluetooth connection by selecting Options > Comms
+ > Enable BT comm, and then one of the following:
+
+
By BT address to connect to a specified Bluetooth address.
+
By BT name to connect to a specified Bluetooth name.
+
Search when starting to select a Bluetooth connection when you
+ start the HTI connection.
+
+
+
Start the HTI Framework by selecting Options >
+ Start.
+
On the PC, configure and start a Bluetooth serial port service. For
+ instructions on setting up a serial port service on a PC, see the manual of
+ your Bluetooth driver.
+
Before starting the HTI connection, configure the PC’s Bluetooth serial
+ port service not to use Secure Connection. This means that no pairing or
+ authorization is needed when the phone connects to the PC.
+
On the PC, open the HTI Connection Carbide.c++ Extension by
+ selecting Carbide > HTI Connection.
+
In the HTI Connection Carbide.c++ Extension, click to open the Preferences dialog. In the
+ dialog click New... to create a new connection, or select Current
+ connection or an existing connection from the drop down list.
+
Note: If you select Current connection, HTI Connection
+ will automatically use the currently active connection.If Current
+ connection is selected, user can change the currently active connection
+ easily either from Remote Connection view, or from a new Trim widget
+ showing the current connection.
+
+
Configure the HTI connection to use Serial communication. Click
+ Next and check that the HTI settings correspond to the Bluetooth
+ serial port service configured and started earlier.
+
(Optional) To test the connection, click Initiate service testing.
+ The test status is shown in the Status pane:
+
+
Status not tested
+
Connection to HTI agent OK, HTI version x.xx
+
HTI agent in the device is not responding
+
Connection failed
+
+
+
Click Finish to close the wizard. HTI Connection now starts the
+ Datagateway with the connection you configured. If the Datagateway does not
+ start automatically, start it by clicking . The connection status will be displayed in
+ the status line above the console screen:
+
+
Not connected
+
Testing connection
+
Trying to connect to <connection name>
+
Connected to <connection name>
+
+
+
+
+
In addition to configuring and starting HTI connections, you can do the
+following:
+
+
To stop the Datagateway, click .
+
To edit the connection settings, click .
+
To delete a connection, open the Remote Connections view and use
+ the dynamic menu. For details, see Viewing remote connections.
and select New Connection to create a new connection, or select an existing connection.
. The connection status will be displayed in the status line above the console screen:
- 
.
.