<?xml version="1.0" encoding="UTF-8"?>

<project name="SF-POSTBUILD" xmlns:hlm="http://www.nokia.com/helium">

    <target name="sf-postbuild">

        <echo>[SF-POSTBUILD]</echo>

        <if><istrue value="${sf.relicense.exported.headers}"/>

        <then>

            <runtarget target="sf-run-sfl-licence-munging"/>

        </then>

        </if>

        <parallel>

            <!-- TAG SOURCE CODE -->

            <if>

                <istrue value="${sf.spec.tagafterbuild.enable}" />

                <then>

                    <echo message="Apply tag to the source code used in this build"/>

                    <runtarget target="sf-tag-hg-code"/>

                </then>

            </if>

            <!-- Create MD5s -->

            <if>

                <istrue value="${sf.spec.md5.enable}"/>

                <then>

                    <echo message="INFO Creating MD5s"/>

                    <runtarget target="sf-run-evalid"/>

                </then>

            </if>

            <!-- Package up the binaries we built -->

            <if>

                <istrue value="${sf.spec.package.bin.enable}"/>

                <then>

                    <echo message="INFO Packaging Binaries"/>

                    <runtarget target="sf-package-binary"/>

                    <runtarget target="sf-package-tools"/>

                    <echo message="INFO Validate Zip files"/>

                    <runtarget target="sf-package-validate"/>

                </then>

            </if>

            <!-- run build analysis tools -->

            <runtarget target="sf-run-analysis"/>

            <if>

                <istrue value="${sf.spec.publish.enable}"/>

                <then>

                    <!-- Generate reports to compare this build to a previous one -->

                    <runtarget target="sf-compare-to-baseline"/>

                </then>

            </if>

        </parallel>

        <!-- Generate release_metadata entries for the md5 zips -->

        <antcall target="sf-zip-content">

            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="bin-just-metadata" />

        </antcall>

        <!-- Launch smoketest -->

        <if><istrue value="${sf.spec.test.sendpkg.enable}"/>

            <then>

                <runtarget target="sf-build-smoketestpkg"/>

                <runtarget target="sf-send-testpkg"/>

            </then>

        </if>

        <!-- Launch BC check -->

        <if><istrue value="${sf.spec.bccheck.enable}"/>

            <then>

                <runtarget target="sf-bc-check"/>

            </then>

        </if>

        <!-- copy log files linked to the generation of roms for REE -->

        <runtarget target="sf-copy-rom-logs"/>

        <!-- Zip up all the logs -->

        <runtarget target="sf-zip-logs"/>

        <if>

            <istrue value="${sf.spec.publish.enable}" />

            <then>

                <echo message="Send links to Diamonds"/>

                <runtarget target="sf-links-to-diamonds"/>

                <echo message="Send BRAG status information to Diamonds"/>

                <runtarget target="sf-brag-to-diamonds"/>

                <echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>

                <runtarget target="sf-publish"/>

            </then>

        </if>

    </target>

    <target name="sf-tag-hg-code">

        <property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>

        <fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"

              outputFile="${temp.build.dir}/tag-hg-code.ant.xml">

            <data expandProperties="yes">

                ant: antProperties()

                data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})

            </data>

        </fmpp>

        <ant antfile="${temp.build.dir}/tag-hg-code.ant.xml"/>

    </target>

    <target name="sf-run-evalid" >

        <delete dir="${build.drive}/output/md5"/>

        <mkdir  dir="${build.drive}/output/md5"/>

        <parallel>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/include output/md5/epoc32_include.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/s60 output/md5/epoc32_s60.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/localisation output/md5/epoc32_localisation.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -x \.sym$ -x ^armv5/udeb -x ^armv5/urel -x ^winscw/udeb -x ^winscw/urel -g epoc32/release output/md5/epoc32_release.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -x \.sym$ -g epoc32/release/armv5/udeb output/md5/epoc32_release_armv5_udeb.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -x \.sym$ -g epoc32/release/armv5/urel output/md5/epoc32_release_armv5_urel.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -x \.sym$ -g epoc32/release/winscw/udeb output/md5/epoc32_release_winscw_udeb.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -x \.sym$ -g epoc32/release/winscw/urel output/md5/epoc32_release_winscw_urel.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/cshlpcmp_template 	output/md5/epoc32_cshlpcmp_template.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/data output/md5/epoc32_data.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/engdoc output/md5/epoc32_engdoc.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/engineeringtools output/md5/epoc32_engineeringtools.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/gcc output/md5/epoc32_gcc.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/gcc_mingw output/md5/epoc32_gcc_mingw.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/ksa output/md5/epoc32_ksa.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/rom output/md5/epoc32_rom.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/rombuild output/md5/epoc32_rombuild.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/sbs_config output/md5/epoc32_sbs_config.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/sdk_special output/md5/epoc32_sdk_special.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/stdapis output/md5/epoc32_stdapis.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/stubs output/md5/epoc32_stubs.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/tools output/md5/epoc32_tools.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/wins output/md5/epoc32_wins.md5"/>

        </exec>

        <exec executable="cmd" dir="${build.drive}/">

            <arg value="/c"/>

            <arg value="evalid -g epoc32/winscw output/md5/epoc32_winscw.md5"/>

        </exec>

        </parallel>

        <!-- package MD5s directly into epoc32/relinfo location so that its usable out-of-the-box -->

        <zip destfile="${build.output.dir}/zips/release/build_md5.zip">

            <zipfileset dir="${build.drive}/output/md5/" prefix="epoc32/relinfo"/>

        </zip>

    </target>    

    <target name="sf-package-binary" depends="sf-package-postbuild-rnd">

        <!-- Warning: Reverting to using the He zipper will also revert to a single zip for the binaries:

             would need to update the template and possibly the script that populates it -->

        <!--antcall target="sf-zip-content">

            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="bin" />

        </antcall-->

        <parallel>

            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">

                <arg value="a"/>

                <arg value="-tzip"/>

                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>

                <arg value="-x!epoc32\tools"/>

                <arg value="-x!epoc32\build"/>

                <arg value="-x!epoc32\release\armv5"/>

                <arg value="-x!epoc32\release\winscw"/>

                <arg value="-xr!*.sym"/>

                <arg value="${build.drive}/output/zips/release/binaries_epoc.zip"/>

                <arg value="epoc32\"/>

            </exec>

            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_winscw.log">

                <arg value="a"/>

                <arg value="-tzip"/>

                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>

                <arg value="-xr!*.sym"/>

                <arg value="${build.drive}/output/zips/release/binaries_winscw.zip"/>

                <arg value="epoc32\release\winscw\"/>

            </exec>

            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_armv5.log">

                <arg value="a"/>

                <arg value="-tzip"/>

                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>

                <arg value="-xr!*.sym"/>

                <arg value="${build.drive}/output/zips/release/binaries_armv5.zip"/>

                <arg value="epoc32\release\armv5\"/>

            </exec>

        </parallel>

        <!-- Generate release_metadata entries for the above zips -->

        <antcall target="sf-zip-content">

            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="bin-just-metadata" />

        </antcall>

    </target>

    <target name="sf-package-postbuild-rnd" >

        <antcall target="sf-zip-content">

            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="rnd-postbuild" />

        </antcall>

    </target>

    <target name="sf-package-tools" >

        <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_tools_epoc32.log">

            <arg value="a"/>

            <arg value="-tzip"/>

            <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>

            <arg value="${build.drive}/output/zips/release/tools_epoc.zip"/> 

            <arg value="epoc32/tools"/>

        </exec>

        <antcall target="sf-zip-content">

            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="tools" />

        </antcall>

    </target>

    <target name="sf-package-validate">

        <exec executable="7z" dir="${build.drive}/output/zips" failonerror="false" output="${build.drive}/output/zips/validate.log">

            <arg value="t"/>

            <arg value="*.zip"/>

        </exec>  

        <exec executable="7z" dir="${build.drive}/output/zips/release" failonerror="false" output="${build.drive}/output/zips/release/validate.log">

            <arg value="t"/>

            <arg value="*.zip"/>

        </exec>  

    </target>

    <!-- runs analysis of missing bins and source -->

    <target name="sf-run-analysis">

        <mkdir dir="${build.log.dir}/analysis"/>

        <parallel>

          <runtarget target="sf-run-analysis-ant"/>

          <runtarget target="sf-run-analysis-raptor"/>

          <runtarget target="sf-run-analysis-yarp"/>

          <runtarget target="sf-run-analysis-whatlog-summary"/>

          <runtarget target="sf-run-analysis-missing-files"/>

        </parallel>

        <if>

          <istrue value="${sf.spec.publish.enable}"/>

            <then>

            <runtarget target="sf-run-analysis-diamonds"/>

            </then>

        </if>

    </target>

    <target name="sf-run-analysis-ant">    

        <echo message="Running source analysis of ANT output"/>

        <exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">

            <arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>

            <arg value="*ant*"/>

        </exec>

    </target>

    <target name="sf-run-analysis-raptor">            

      <echo message="Preprocessing *_compile.log files"/>

      <delete file="${build.log.dir}/analysis/${build.id}_preprocess.log"/>

      <for param="logfile">

        <path>

          <fileset dir="${build.log.dir}">

            <include name="*_compile.log"/>

            <exclude name="*build_check_compile.log"/>

          </fileset>

        </path>

        <sequential>

          <propertyregex override="yes" property="preprocessedlogfile" input="@{logfile}" regexp=".*[\\/](.*)_compile\.log" replace="\1_compile_preprocessed.log"/>

          <echo message="Preprocessing @{logfile}..."/>

          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" input="@{logfile}" output="${build.log.dir}/analysis/${preprocessedlogfile}" errorProperty="@{logfile}" >

            <arg value="${sf.common.config.dir}/tools/raptor/preprocess_log.pl"/>

          </exec>

	  <echo file="${build.log.dir}/analysis/${build.id}_preprocess.log" append="true" message="${@{logfile}}${line.separator}"/>

        </sequential>

      </for>

      <echo message="Extracting whatlog information from *whatlog*_compile_preprocessed.log files"/>

      <apply executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_whatlog.log" parallel="true">

        <arg value="releaseables.pl"/>

        <arg value="--basedir=${build.log.dir}"/>

        <fileset dir="${build.log.dir}/analysis">

          <include name="*whatlog*_compile_preprocessed.log"/>

        </fileset>

      </apply>

      <echo message="Extracting error information from *_compile_preprocessed.log files"/>

      <apply executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" parallel="true">

        <arg value="uh.pl"/>

        <arg value="--basedir=${build.log.dir}"/>

        <fileset dir="${build.log.dir}/analysis">

          <include name="*_compile_preprocessed.log"/>

        </fileset>

      </apply>

      <!-- Now iterate through the generated TSVs to sort them and remove duplicates -->

      <for param="tsv">

        <path>

          <fileset dir="${build.log.dir}">

            <include name="releaseables/**/*.tsv"/>

          </fileset>

        </path>

        <sequential>

          <exec executable="perl" input="@{tsv}" output="@{tsv}">

            <arg value="${sf.common.config.dir}/tools/sortUnique.pl"/>

          </exec>

        </sequential>

      </for>

      <!-- Cook the raptor analysis further to produce something in the right format for the BRAG system -->

      <exec executable="perl" output="${build.log.dir}/summary/Raptor_BRAG.xml" logError="yes">

        <arg value="${sf.common.config.dir}/tools/brag/raptorToBRAG.pl"/>

        <arg value="--raptorsummary"/>

        <arg value="${build.log.dir}/raptorbits/summary.csv"/>

      </exec>

      <!-- And copy the XSL so the output can be transformed by a browser -->

      <copy file="${sf.common.config.dir}/tools/brag/brag.xsl" toDir="${build.log.dir}/summary/"/>

    </target>

    <target name="sf-run-analysis-yarp">

      <echo message="Running yarp over *_compile.log files"/>

      <for param="logfile">

        <path>

          <fileset dir="${build.log.dir}">

            <include name="*_compile.log"/>

            <exclude name="*build_check_compile.log"/>

          </fileset>

        </path>

        <sequential>

          <propertyregex override="yes" property="yarpfile"  input="@{logfile}" regexp=".*[\\|\/](.*)_compile\.log" replace="\1_yarp.csv"/>

          <propertyregex override="yes" property="yarpfile_short"  input="${yarpfile}" regexp="[^_]*_[^_]*_[^_]*_(.+)_[^_]*_yarp\.csv" replace="YARP_\1"/>

          <echo message="Yarping @{logfile}..."/>

          <exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${yarpfile}.log" append="true">

            <arg value="${sf.common.config.dir}/tools/analysis/yarp.pl"/>

            <arg value="@{logfile}"/>

            <arg value="${build.log.dir}/analysis/${yarpfile}"/>

          </exec>

          <exec executable="cmd" output="${build.drive}/output/logs/analysis/tmp_yarp_files.csv" append="true">

            <arg value="/c"/>

            <arg value="echo"/>

            <arg value="${yarpfile_short},${sf.spec.publish.networkdrive}\${sf.spec.job.name}\builds\${sf.spec.job.codeline}\${build.id}\logs\analysis\${yarpfile},${build.drive}\output\logs\analysis\${yarpfile}"/>

          </exec>

        </sequential>

      </for>

      <!-- Cook the yarp analysis further to produce something in the right format for the BRAG system -->

      <mkdir dir="${build.log.dir}/summary/"/>

      <exec executable="perl" output="${build.log.dir}/summary/Yarp_BRAG.xml" logError="yes">

        <arg value="${sf.common.config.dir}/tools/brag/yarpToBRAG.pl"/>

        <arg value="${build.log.dir}/analysis/*_yarp.csv"/>

      </exec>

      <exec executable="perl" dir="${build.drive}" failonerror="false" outputproperty="sf.job.totalyarperrors">

        <arg value="${sf.common.config.dir}/tools/analysis/parse_yarp_files.pl"/>

        <arg value="${build.drive}/output/logs/analysis/tmp_yarp_files.csv"/>

      </exec>

      <echo message="Total yarp errors: ${sf.job.totalyarperrors}"/>

    </target>

    <target name="sf-run-analysis-whatlog-summary" >

        <sequential>

          <parallel>

            <runtarget target="sf-run-analysis-list"/>

            <runtarget target="sf-run-analysis-whatlog"/>

          </parallel>

          <runtarget target="sf-run-analysis-whatlog-merge" />

          <parallel>

            <runtarget target="sf-run-analysis-whatlog-package"/>

            <runtarget target="sf-run-analysis-whatlog-collisons"/>

          </parallel>

        </sequential>

    </target>

    <target name="sf-run-analysis-list">    

        <echo message="Running list analysis"/>

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">

            <arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>

            <arg value="..\"/>

        </exec>

    </target>

    <target name="sf-run-analysis-whatlog">    

        <echo message="Running whatlog analysis"/>

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">

            <arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>

            <arg value="..\"/>

        </exec>

    </target>

    <target name="sf-run-analysis-whatlog-merge" >        

        <echo message="Running summary analysis"/>

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">

            <arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>

            <arg value="${build.id}_what_results.csv"/>

            <arg value="${build.id}_list_results.log"/>

            <arg value="${build.drive}/output/zips/release/binaries_epoc_additional.zip"/>

        </exec>

    </target>

    <target name="sf-run-analysis-whatlog-package" >        

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_analysecomponents.log">

            <arg value="${sf.common.config.dir}/tools/analysis/analyse_components.pl"/>

            <arg value="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>

            <arg value="${build.id}_what_results.csv_results.csv"/>

            <arg value="${sf.project.location}/sysdefs/system_model_os.xml"/>

            <arg value="${sf.project.location}/sysdefs/system_model_s60.xml"/>

        </exec>

    </target>