<?xml version="1.0" encoding="UTF-8"?>

<project name="SF-COMPILE" xmlns:hlm="http://www.nokia.com/helium">

 <math result="sf.spec.sbs.numberofjobs" operand1="${env.NUMBER_OF_PROCESSORS}" operation="*" operand2="2" datatype="int"/>

  <!-- compile specified sysdef file. called from sf-compile target in sf-platform/build.xml -->

  <target name="sf-os-compile">

    <antcall target="sf-do-compile" inheritAll="false" inheritRefs="true">

        <param name="sysdef.configurations.list" value="${sf.spec.os.sysdef.clean.configurations.list}" />

        <reference refid="sf.spec.os.system.definition.files" torefid="system.definition.files" />

    </antcall>

  </target>

  <!-- compile specified sysdef file. called from sf-compile target in sf-platform/build.xml -->

  <target name="sf-s60-compile">

    <antcall target="sf-do-compile" inheritAll="false" inheritRefs="true">

        <param name="sysdef.configurations.list" value="${sf.spec.s60.sysdef.clean.configurations.list}" />

        <reference refid="sf.spec.s60.system.definition.files" torefid="system.definition.files" />

    </antcall>

  </target>

  <!-- compile sbs.tools.config and sbs.config. tools built only if its not being unpacked first.

       note: must be called from sf-os/s60-compile targets, as sys model input needed -->

  <target name="sf-do-compile" depends="sf-do-full-export">

    <echo message="INFO Using Helium 7+ for sf-do-compile"/>

    <propertyregex property="sf.unpack.tools" override="true" input="${sf.spec.baseline.getenv_options}" regexp="-i tools" select="true" defaultValue="false" casesensitive="false"/>

    <if> <!-- If tools baseline unpack has not been specified, or its not a "fast" build then try to build them -->

      <or>

        <isfalse value="${sf.unpack.tools}"/>

        <isfalse value="${sf.spec.baseline.enable}"/>

        <isfalse value="${sf.os.compile.fast}"/>

      </or>

      <then>

        <echo message="INFO Building tools, unpack is not specified"/>        

        <!-- sf.spec.sbs.tools.config param used. do-target-build will decide to build sequentially/together -->

        <antcall target="sf-do-target-compile" inheritAll="false" inheritRefs="true">

            <param name="i.sf.spec.sbs.config" value="${sf.spec.sbs.tools.config}" />           

            <param name="qmake.enabled"        value="false"/> <!-- ensure qmake is not run, before its available -->

        </antcall>

      </then>

      <else>

        <echo message="INFO Skipping tools build, tools were unpacked from ${sf.spec.baseline.location}"/>        

      </else>

      </if>

      <!-- sf.spec.sbs.config param used. do-target-build will decide to build sequentially/together -->

      <antcall target="sf-do-target-compile" inheritAll="false" inheritRefs="true">

          <param name="i.sf.spec.sbs.config" value="${sf.spec.sbs.config}" />

      </antcall>

      <!-- Export model to BOM, as generate-layers target is no longer called from compile-main target -->

      <copy file="${build.drive}/output/build/canonical_system_definition_${sysdef.configurations.list}.xml" todir="${build.log.dir}/BOM/"/>

  </target>

  <!-- perform export only first to assist when parallel makefile parsing -->

  <target name="sf-do-full-export">

    <hlm:sbsinput id="sf.export">

        <sbsOptions>

            <arg line="-k" />

            <arg line="-j ${sf.spec.sbs.numberofjobs}"/>

            <arg line="-t ${sf.spec.sbs.retry.limit}"/>

            <arg name="--logfile" value="${compile.log.dir}/${build.id}_${sf.spec.os.sysdef.clean.configurations.list}_compile_full_export.log" />

            <arg name="--makefile" value="${compile.log.dir}/${build.id}_${sf.spec.os.sysdef.clean.configurations.list}_compile_full_export_Makefile" />

            <arg line="--export-only"/>

        </sbsOptions>

    </hlm:sbsinput>

    <!-- call helium's compile-main target using the sbsInput args defined above -->

    <echo message="INFO Full export for all targets"/>

    <antcall target="compile-main" inheritAll="false" inheritRefs="true">

        <param name="build.system" value="${sf.spec.build.system}" />

        <param name="sbs.inputs.list" value="sf.export"/>

        <param name="qmake.enabled"   value="false"/> <!-- ensure qmake is not run, before its available -->

    </antcall> 

  </target>

  <!-- compile sbs.config list of targets either sequentially or together -->

  <target name="sf-do-target-compile">

    <if>

      <istrue value="${sf.os.compile.iterate}"/>

      <then>

        <for list="${i.sf.spec.sbs.config}" delimiter="," param="item.sbs.splitconfig">

        <sequential>

            <!-- define sbs args, log name etc -->

            <hlm:sbsinput id="sf.build">

                <sbsOptions>

                    <arg line="-c @{item.sbs.splitconfig}"/>

                    <arg line="-k" />

                    <arg line="-j ${sf.spec.sbs.numberofjobs}"/>

                    <arg line="-t ${sf.spec.sbs.retry.limit}"/>

                    <arg line="${sf.spec.sbs.options}"/>

                    <arg name="--filters" value="&quot;${sf.spec.sbs.filter.list}&quot;"/>

                    <arg name="--logfile" value="${compile.log.dir}/${build.id}_@{item.sbs.splitconfig}_${sf.spec.os.sysdef.clean.configurations.list}_compile.log" />

                    <arg name="--makefile" value="${compile.log.dir}/${build.id}_@{item.sbs.splitconfig}_${sf.spec.os.sysdef.clean.configurations.list}_Makefile" />

                    <arg line="--noexport"/>

                </sbsOptions>

            </hlm:sbsinput>

            <!-- call helium's compile-main target using the sbsInput args defined above -->

            <echo message="INFO Iterative compile building target: @{item.sbs.splitconfig}"/>

            <antcall target="compile-main" inheritAll="false" inheritRefs="true">

              <param name="build.system" value="${sf.spec.build.system}" />

              <param name="sbs.inputs.list" value="sf.build"/>

            </antcall> 

        </sequential>

        </for>

      </then>

      <else>

           <!-- turn comma separated list into sbs friendly -c list, and _ separated list for friendly log names -->

           <propertyregex property="i.sf.spec.sbs.config.expanded"         override="true" input="${i.sf.spec.sbs.config}" regexp="(,)" replace=" -c " defaultValue="${i.sf.spec.sbs.config}" global="true"  casesensitive="false"/>

           <propertyregex property="i.sf.spec.sbs.config.expanded.logname" override="true" input="${i.sf.spec.sbs.config}" regexp="(,)" replace="_"    defaultValue="${i.sf.spec.sbs.config}" global="true"  casesensitive="false"/>

           <echo message="INFO Target : ${i.sf.spec.sbs.config.expanded}"/>

           <echo message="INFO Logname: ${i.sf.spec.sbs.config.expanded.logname} + Config: ${sf.spec.os.sysdef.clean.configurations.list}"/>

           <!-- TODO: Make this use above compile-main call? -->

           <!-- define sbs args, log name etc -->

           <hlm:sbsinput id="sf.build">

                <sbsOptions>

                    <arg line="-c ${i.sf.spec.sbs.config.expanded}"/>

                    <arg line="-k" />

                    <arg line="-j ${sf.spec.sbs.numberofjobs}"/>

                    <arg line="-t ${sf.spec.sbs.retry.limit}"/>

                    <arg line="${sf.spec.sbs.options}"/>

                    <arg name="--filters" value="&quot;${sf.spec.sbs.filter.list}&quot;"/>

                    <arg name="--logfile" value="${compile.log.dir}/${build.id}_${i.sf.spec.sbs.config.expanded.logname}_${sf.spec.os.sysdef.clean.configurations.list}_compile.log" />

                    <arg name="--makefile" value="${compile.log.dir}/${build.id}_${i.sf.spec.sbs.config.expanded.logname}_${sf.spec.os.sysdef.clean.configurations.list}_Makefile" />

                    <arg line="--noexport"/>

                </sbsOptions>

           </hlm:sbsinput>

            <!-- call helium's compile-main target using the sbsInput args defined above -->

            <echo message="INFO Building target(s): ${i.sf.spec.sbs.config.expanded}"/>

            <antcall target="compile-main" inheritAll="false" inheritRefs="true">

              <param name="build.system" value="${sf.spec.build.system}" />

              <param name="sbs.inputs.list" value="sf.build"/>

            </antcall> 

      </else>

    </if>

  </target>

</project>