<?xml version="1.0" encoding="UTF-8"?>
<project name="SF-POSTBUILD" xmlns:hlm="http://www.nokia.com/helium">
    <target name="sf-postbuild">
        <echo>[SF-POSTBUILD]</echo>
        <parallel>                
        <!-- TAG SOURCE CODE -->
        <if>
            <istrue value="${sf.spec.tagafterbuild.enable}" />
            <then>
                <echo message="Apply tag to the source code used in this build"/>
                <runtarget target="sf-tag-hg-code"/>
            </then>
        </if>
        
        <if>
            <istrue value="${sf.spec.md5.enable}"/>
            <then>
                <echo message="INFO Creating MD5s"/>
                <runtarget target="sf-run-evalid"/>
            </then>
        </if>
        <if>
            <istrue value="${sf.spec.package.bin.enable}"/>
            <then>
                <echo message="INFO Packaging Binaries"/>
                <runtarget target="sf-package-binary"/>
                <runtarget target="sf-package-tools"/>

                <echo message="INFO Validate Zip files"/>
                <runtarget target="sf-package-validate"/>
            </then>
        </if>
        <!-- run build analysis tools -->
        <runtarget target="sf-run-analysis"/>
        
        </parallel>
        
        <if><istrue value="${sf.spec.test.sendpkg.enable}"/>
            <then>
                <runtarget target="sf-build-smoketestpkg"/>
                <runtarget target="sf-send-testpkg"/>
            </then>
        </if>


        <runtarget target="sf-zip-logs"/>

        <!-- Do BC check -->
        <if><istrue value="${sf.spec.bccheck.enable}"/>
            <then>
                <runtarget target="sf-bc-check"/>
            </then>
        </if>

        <!-- PUBLISH LOGS/REPORTS -->
        <if>
            <istrue value="${sf.spec.publish.enable}" />
            <then>
                <echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
                <runtarget target="sf-publish"/>
            </then>
        </if>
    </target>

    <target name="sf-tag-hg-code">
        <property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>
        <fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"
              outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">
            <data expandProperties="yes">
                ant: antProperties()
                data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
            </data>
        </fmpp>
        <ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>
    </target>

    <target name="sf-run-evalid">
        <delete dir="${build.drive}/output/md5"/>
        <mkdir  dir="${build.drive}/output/md5"/>

        <parallel>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/include output/md5/epoc32_include.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/s60 output/md5/epoc32_s60.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/localisation output/md5/epoc32_localisation.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -x ^armv5/udeb -x ^armv5/urel -x ^winscw/udeb -x ^winscw/urel -g epoc32/release output/md5/epoc32_release.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/armv5/udeb output/md5/epoc32_release_armv5_udeb.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/armv5/urel output/md5/epoc32_release_armv5_urel.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/winscw/udeb output/md5/epoc32_release_winscw_udeb.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/winscw/urel output/md5/epoc32_release_winscw_urel.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/cshlpcmp_template 	output/md5/epoc32_cshlpcmp_template.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/data output/md5/epoc32_data.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/engdoc output/md5/epoc32_engdoc.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/engineeringtools output/md5/epoc32_engineeringtools.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/gcc output/md5/epoc32_gcc.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/gcc_mingw output/md5/epoc32_gcc_mingw.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/ksa output/md5/epoc32_ksa.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/rom output/md5/epoc32_rom.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/rombuild output/md5/epoc32_rombuild.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/sbs_config output/md5/epoc32_sbs_config.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/sdk_special output/md5/epoc32_sdk_special.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/stdapis output/md5/epoc32_stdapis.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/stubs output/md5/epoc32_stubs.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/tools output/md5/epoc32_tools.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/wins output/md5/epoc32_wins.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/winscw output/md5/epoc32_winscw.md5"/>
        </exec>
        </parallel>
        
        <!-- package MD5s directly into epoc32/relinfo location so that its usable out-of-the-box -->
        <property name="temp.md5.zip" value="${env.TEMP}/MD5_${sf.spec.job.name}_${build.number}.zip"/>
        <echo message="INFO Packaging MD5s"/>
        <zip destfile="${temp.md5.zip}">
            <zipfileset dir="${build.drive}/output/md5/" prefix="epoc32/relinfo"/>
        </zip>
        <move file="${temp.md5.zip}" todir="${build.log.dir}" failonerror="false"/>
    </target>    
    
    <target name="sf-package-binary" depends="sf-preprocess-package-config,sf-package-postbuild-rnd">
        <!-- Warning: Reverting to using the He zipper will also revert to a single zip for the binaries:
             would need to update the template and possibly the script that populates it -->
        <!--antcall target="sf-zip-content">
            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
            <param name="zip.target.name" value="bin" />
        </antcall-->
        <parallel>
            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">
                <arg value="a"/>
                <arg value="-tzip"/>
                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
                <arg value="-x!epoc32\tools"/>
                <arg value="-x!epoc32\build"/>
                <arg value="-x!epoc32\release\armv5"/>
                <arg value="-x!epoc32\release\winscw"/>
                <arg value="-xr!*.sym"/>
                <arg value="${build.drive}/output/zips/release/binaries_epoc.zip"/>
                <arg value="epoc32\"/>
            </exec>
            
            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_winscw.log">
                <arg value="a"/>
                <arg value="-tzip"/>
                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
                <arg value="-xr!*.sym"/>
                <arg value="${build.drive}/output/zips/release/binaries_winscw.zip"/>
                <arg value="epoc32\release\winscw\"/>
            </exec>
            
            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_armv5.log">
                <arg value="a"/>
                <arg value="-tzip"/>
                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
                <arg value="-xr!*.sym"/>
                <arg value="${build.drive}/output/zips/release/binaries_armv5.zip"/>
                <arg value="epoc32\release\armv5\"/>
            </exec>
        </parallel>
    </target>

    <target name="sf-package-postbuild-rnd" depends="sf-preprocess-package-config">

        <!-- zip any RnD _includefile.txt files generated during source packaging -->
        <exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zip_postbuild.log">
            <arg value="${sf.common.config.dir}/tools/zip_includefiles.pl"/>
        </exec>
        <!-- cleanup my moving includefiles to logs and zips to zips\release -->
        <move todir="${build.log.dir}">
            <fileset dir="${build.drive}"><include name="*_includefile.txt"/></fileset>
        </move>
        <move todir="${build.drive}/output/zips/release">
            <fileset dir="${build.drive}"><include name="bin*.zip"/></fileset>
        </move>
        <!-- TODO: merge with release_metadata.xml ? -->
    </target>

    <target name="sf-package-tools" depends="sf-preprocess-package-config">
        <echo message="Packaging epoc32 tools - Temporary method"/>
        <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_tools_epoc32.log">
            <arg value="a"/>
            <arg value="-tzip"/>
            <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<!--            <arg value="-x@${build.log.dir}/*_includefile.txt"/> -->
            <arg value="${build.drive}/output/zips/release/tools_epoc.zip"/> 
            <arg value="epoc32/tools"/>
        </exec>
    </target>
    
    <target name="sf-package-validate">
        <exec executable="7z" dir="${build.drive}/output/zips" failonerror="false" output="${build.drive}/output/zips/validate.log">
            <arg value="t"/>
            <arg value="*.zip"/>
        </exec>  
        <exec executable="7z" dir="${build.drive}/output/zips/release" failonerror="false" output="${build.drive}/output/zips/release/validate.log">
            <arg value="t"/>
            <arg value="*.zip"/>
        </exec>  
    </target>

    <!-- runs analysis of missing bins and source -->
    <target name="sf-run-analysis">
        <mkdir dir="${build.log.dir}/analysis"/>
        <parallel>
          <runtarget target="sf-run-analysis-ant"/>
          <runtarget target="sf-run-analysis-raptor"/>
          <runtarget target="sf-run-analysis-yarp"/>
          <runtarget target="sf-run-analysis-whatlog-summary"/>
        </parallel>
        <if>
          <istrue value="${sf.spec.publish.enable}"/>
            <then>
            <runtarget target="sf-run-analysis-diamonds"/>
            </then>
        </if>    
    </target>

    <target name="sf-run-analysis-ant">    
        <echo message="Running source analysis of ANT output"/>
        <exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">
            <arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>
            <arg value="*ant*"/>
        </exec>
    </target>

    <target name="sf-run-analysis-raptor">            
      <echo message="Preprocessing *_compile.log files"/>
      <for param="logfile">
        <path>
          <fileset dir="${build.log.dir}">
            <include name="*_compile.log"/>
            <exclude name="*build_check_compile.log"/>
          </fileset>
        </path>
        <sequential>
          <propertyregex override="yes" property="preprocessedlogfile" input="@{logfile}" regexp=".*[\\|\/].*\.T?\d+_+(.*)_compile\.log" replace="\1_compile_preprocessed.log"/>
	        <echo message="Preprocessing @{logfile}..."/>
          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" input="@{logfile}" output="${build.log.dir}/analysis/${preprocessedlogfile}" error="${build.log.dir}/analysis/${build.id}_preprocess.log" append="true">
            <arg value="${sf.common.config.dir}/tools/raptor/preprocess_log.pl"/>
          </exec>
        </sequential>
      </for>
      
      <echo message="Extracting whatlog information from *whatlog*_compile_preprocessed.log files"/>
      <for param="whatlogfile">
        <path>
          <fileset dir="${build.log.dir}/analysis">
            <include name="*whatlog*_compile_preprocessed.log"/>
          </fileset>
        </path>
        <sequential>
          <echo message="Extracting whatlog info from @{whatlogfile}..."/>
          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_whatlog.log" append="true">
            <arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
            <arg value="--releaseable"/>
            <arg value="--log=@{whatlogfile}"/>
            <arg value="--basedir=${build.log.dir}"/>
            <arg value="--append"/>
          </exec>
        </sequential>
      </for>
      
      <echo message="Extracting error information from *_compile_preprocessed.log files"/>
      <for param="raptorlogfile">
        <path>
          <fileset dir="${build.log.dir}/analysis">
            <include name="*_compile_preprocessed.log"/>
          </fileset>
        </path>
        <sequential>
          <echo message="Extracting error info from @{raptorlogfile}..."/>
          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
            <arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
            <arg value="--error"/>
            <arg value="--warning"/>
            <arg value="--log=@{raptorlogfile}"/>
            <arg value="--basedir=${build.log.dir}/raptorbits"/>
            <arg value="--append"/>
          </exec>
        </sequential>
      </for>
            <!-- Now iterate through the generated TSVs to sort them and remove duplicates -->
      <for param="tsv">
        <path>
          <fileset dir="${build.log.dir}">
            <include name="releaseables/**/*.tsv"/>
          </fileset>
        </path>
        <sequential>
          <exec executable="perl" input="@{tsv}" output="@{tsv}">
            <arg value="${sf.common.config.dir}/tools/sortUnique.pl"/>
          </exec>
        </sequential>
      </for>
    </target>

    <target name="sf-run-analysis-yarp">          
      <echo message="Running yarp over *_compile.log files"/>
      <for param="logfile">
        <path>
          <fileset dir="${build.log.dir}">
            <include name="*_compile.log"/>
            <exclude name="*build_check_compile.log"/>
          </fileset>
        </path>
        <sequential>
          <propertyregex override="yes" property="yarpfile"  input="@{logfile}" regexp=".*[\\|\/](.*)_compile\.log" replace="\1_yarp.csv"/>
          <propertyregex override="yes" property="yarpfile_short"  input="${yarpfile}" regexp="[^_]*_[^_]*_[^_]*_(.+)_[^_]*_yarp\.csv" replace="YARP_\1"/>
          <echo message="Yarping @{logfile}..."/>
          <exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${yarpfile}.log" append="true">
            <arg value="${sf.common.config.dir}/tools/analysis/yarp.pl"/>
            <arg value="@{logfile}"/>
            <arg value="${build.log.dir}/analysis/${yarpfile}"/>
          </exec>
          <exec executable="cmd" output="${build.drive}/output/logs/analysis/tmp_yarp_files.csv" append="true">
            <arg value="/c"/>
            <arg value="echo"/>
            <arg value="${yarpfile_short},${sf.spec.publish.networkdrive}\${sf.spec.job.name}\builds\${sf.spec.job.codeline}\${build.id}\logs\analysis\${yarpfile},${build.drive}\output\logs\analysis\${yarpfile}"/>
          </exec>
        </sequential>
      </for>
      
      <exec executable="perl" dir="${build.drive}" failonerror="false" outputproperty="sf.job.totalyarperrors">
        <arg value="${sf.common.config.dir}/tools/analysis/parse_yarp_files.pl"/>
        <arg value="${build.drive}/output/logs/analysis/tmp_yarp_files.csv"/>
      </exec>
      <echo message="Total yarp errors: ${sf.job.totalyarperrors}"/>
    </target>
    
    <target name="sf-run-analysis-whatlog-summary" >
        <sequential>
          <parallel>
            <runtarget target="sf-run-analysis-list"/>
            <runtarget target="sf-run-analysis-whatlog"/>
          </parallel>
          <runtarget target="sf-run-analysis-whatlog-merge" />
          <parallel>
            <runtarget target="sf-run-analysis-whatlog-package"/>
            <runtarget target="sf-run-analysis-whatlog-collisons"/>
          </parallel>
        </sequential>
    </target>
    
    <target name="sf-run-analysis-list">    
        <echo message="Running list analysis"/>
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">
            <arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>
            <arg value="..\"/>
        </exec>
    </target>

    <target name="sf-run-analysis-whatlog">    
        <echo message="Running whatlog analysis"/>
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">
            <arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>
            <arg value="..\"/>
        </exec>
    </target>

    <target name="sf-run-analysis-whatlog-merge" >        
        <echo message="Running summary analysis"/>
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">
            <arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>
            <arg value="${build.id}_what_results.csv"/>
            <arg value="${build.id}_list_results.log"/>
            <arg value="${build.drive}/output/zips/release/binaries_epoc_additional.zip"/>
        </exec>
    </target>
    
    <target name="sf-run-analysis-whatlog-package" >        
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_analysecomponents.log">
            <arg value="${sf.common.config.dir}/tools/analysis/analyse_components.pl"/>
            <arg value="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>
            <arg value="${build.id}_what_results.csv_results.csv"/>
            <arg value="${sf.project.location}/sysdefs/system_model_os.xml"/>
        </exec>
    </target>
    
    <target name="sf-run-analysis-whatlog-collisons" >        
        <echo message="Running collision analysis"/>
        <exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_collisions.log">
            <arg value="${sf.common.config.dir}/tools/analysis/find_collisions.pl"/>
            <arg value="${build.log.dir}/analysis/${build.id}_what_results.csv"/>
        </exec>
    </target>

    <target name="sf-run-analysis-diamonds">      
      <fmpp sourceFile="${sf.common.config.dir}/diamonds/sf-run-analysis.xml.ftl" outputFile="${build.drive}/output/logs/sf-run-analysis.xml">
        <data expandProperties="yes">
          ant: antProperties()
          raptor_summary: csv(${build.log.dir}/raptorbits/summary.csv,{separator:',',headers:[category,subcategory,severity,component,phase,recipe,file,line]})
          files: csv(${build.drive}/output/logs/analysis/tmp_yarp_files.csv,{separator:',',headers:[name,path,localpath]})
        </data>
      </fmpp>
    </target>

    <target name="sf-build-smoketestpkg" depends="sf-getenv-tools">
        <delete dir  ="${build.drive}/smoketest"/>
        <delete file ="${build.log.dir}/ATS_${build.id}_smoketest.log"/>
        
        <echo message="INFO Copy smoketest source to EPOCROOT"/>
        
        <copy todir="${build.drive}/smoketest">
            <fileset dir="${sf.common.config.dir}/tools/ats/smoketest"/>
        </copy>
        
        <echo message="INFO Building smoketest"/>
        <exec executable="cmd" dir="${build.drive}/smoketest/group" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
            <arg value="/c"/>
            <arg value="sbs -b bld.inf -c winscw_udeb.test"/>
        </exec>

        <echo message="INFO Creating smoketest testpackage"/>
        <exec executable="perl" dir="${build.drive}/smoketest/group" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
            <arg value="smoketest.pl"/>
        </exec>
        <copy file="${build.drive}/smoketest/group/smoketest.zip" todir="${sf.spec.test.package.location}"/>
        
        <echo message="INFO Updating smoketest package with test info"/>
        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_smoketest.log">
            <arg value="ats_specialise_test_drop.pl"/>
            <arg value="--test-drop-name=Smoketest-${build.id}"/> 
            <arg value="--device-name=GENERIC EMULATOR on ${env.COMPUTERNAME}"/>
            <arg value="--src=${sf.spec.test.package.location}\smoketest.zip"/>
            <arg value="--dest=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>	
            <arg value="--build-id=http://${sf.spec.publish.diamonds.server}${diamonds.build.id}"/>			
        </exec>
        <!-- Now ready to send to ATS3 -->
    </target>   

    <target name="sf-send-testpkg" depends="sf-find-ATS-worker-root,sf-make-junction">
        <mkdir dir="${sf.spec.test.workerroot}/${sf.spec.test.package.droppath}"/>
        <echo message="Sending test package ${sf.spec.test.package.name} to ${sf.spec.test.host.name} path ${sf.spec.test.host.droppath}"/>
        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_testdrop.log">
            <arg value="ats3_testdrop.pl"/>
            <arg value="--host=${sf.spec.test.host.name}"/>
            <arg value="--username=${sf.spec.test.host.username}"/>
            <arg value="--password=${sf.spec.test.host.password}"/>
            <arg value="--local-test-pkg=${sf.spec.test.package.location}\${sf.spec.test.package.name}"/>
            <arg value="--local-drop-path=${sf.spec.test.workerroot}/${sf.spec.test.package.droppath}"/>
            <arg value="--host-drop-path=${sf.spec.test.host.droppath}"/>
        </exec>
    </target>

    <!-- package all logs into zipfile before publish -->
    <target name="sf-zip-logs">
        <if>
            <istrue value="${sf.spec.logs.zip.enable}"/>
            <then>
                <property name="temp.log.dir" value="${env.TEMP}/${build.id}_output_logs"/>
                <echo message="Zip log requested, zipping logs..."/>
                <mkdir dir="${temp.log.dir}"/>
                <zip destfile="${temp.log.dir}/build_logs.zip" basedir="${build.drive}"> 
                    <include name="output/logs/**"/>
                    <exclude name="output/logs/BOM/**"/>
                    <exclude name="output/logs/deliverables/**"/>
                    <exclude name="output/logs/releaseables/**"/>
                </zip>
                <zip destfile="${temp.log.dir}/build_BOM.zip">
                    <zipfileset dir="${build.drive}/output/logs/BOM" prefix="build_info/logs/BOM"/>
                    <zipfileset dir="${build.drive}/output/logs/releaseables" prefix="build_info/logs/releaseables"/>
                </zip>
                <move todir="${build.log.dir}">
                    <fileset dir="${temp.log.dir}"/>
                </move>
            </then>
        </if>
    </target>

    <target name="sf-bc-check">

        <if><isset property="env.PDT_HOME"/>
        <then>
            <!-- create BC dir -->
            <mkdir dir="${build.log.dir}/BC"/>

            <delete file="${build.log.dir}/BC/bc.config" quiet="true"/>
            <delete file="${build.log.dir}/BC/BBCResults.xsl" quiet="true"/>
            <delete file="${build.log.dir}/BC/libraries.txt" quiet="true"/>
            <delete file="${build.log.dir}/BC/libraries_report.xml" quiet="true"/>
            <delete file="${build.log.dir}/BC/headers.txt" quiet="true"/>
            <delete file="${build.log.dir}/BC/headers_report.xml" quiet="true"/>

            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
                <arg value="/c"/>
                <arg value="echo"/>
                <arg value="BASELINE_NAME=${sf.spec.bccheck.baseline.name}"/>
            </exec>
            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
                <arg value="/c"/>
                <arg value="echo"/>
                <arg value="BASELINE_SDK_DIR=${sf.spec.bccheck.baseline.skd.dir}"/>
            </exec>
            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
                <arg value="/c"/>
                <arg value="echo"/>
                <arg value="BASELINE_SDK_S60_VERSION=${sf.spec.bccheck.baseline.s60.version}"/>
            </exec>
            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
                <arg value="/c"/>
                <arg value="echo"/>
                <arg value="CURRENT_NAME=${build.id}"/>
            </exec>
            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
                <arg value="/c"/>
                <arg value="echo"/>
                <arg value="CURRENT_SDK_DIR=${build.drive}"/>
            </exec>
            <exec executable="cmd" output="${build.log.dir}/BC/bc.config" append="true">
                <arg value="/c"/>
                <arg value="echo"/>
                <arg value="CURRENT_SDK_S60_VERSION=${sf.spec.bccheck.current.s60.version}"/>
            </exec>

            <copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/BBCResults.xsl" tofile="${build.log.dir}/BC/BBCResults.xsl" failonerror="false" verbose="true"/>

            <if><istrue value="${sf.spec.bccheck.enable.la}"/>
                <then>
                    <exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/libraries.txt">
                        <arg value="CheckBC.py"/>
                        <arg value="${build.log.dir}/BC/bc.config"/>
                        <arg value="-la"/>
                        <arg value="-f"/>
                        <arg value="${sf.spec.bccheck.reportid}"/>
                    </exec>
                    <copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Libraries_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/libraries_report.xml" failonerror="false" verbose="true"/>
                </then>
            </if>

            <if><istrue value="${sf.spec.bccheck.enable.ha}"/>
                <then>
                    <exec executable="python" dir="${sf.spec.pdt.root}/fts/compatibilityanalyser" output="${build.log.dir}/BC/headers.txt">
                        <arg value="CheckBC.py"/>
                        <arg value="${build.log.dir}/BC/bc.config"/>
                        <arg value="-ha"/>
                        <arg value="-f"/>
                        <arg value="${sf.spec.bccheck.reportid}"/>
                    </exec>
                    <copy file="${sf.spec.pdt.root}/fts/compatibilityanalyser/reports/Headers_CompatibilityReport_${sf.spec.bccheck.reportid}.xml" tofile="${build.log.dir}/BC/headers_report.xml" failonerror="false" verbose="true"/>
                </then>
            </if>

            <if><istrue value="${sf.spec.bccheck.enable.dynamic}"/>
                <then>
                    <echo message="INFO Updating bctest package with test info"/>
                    <exec executable="perl" dir="${sf.common.config.dir}/tools/ats/" failonerror="false" append="true" output="${build.log.dir}/ATS_${build.id}_dynamicbc.log">
                        <arg value="ats_specialise_test_drop.pl"/>
                        <arg value="--test-drop-name=bctest-${build.id}"/> 
                        <arg value="--device-name=GENERIC EMULATOR on ${env.COMPUTERNAME}"/>
                        <arg value="--src=${sf.spec.test.package.location}\..\bctest\bctest.zip"/>
                        <arg value="--dest=${sf.spec.test.package.location}\${sf.spec.bccheck.package.name}"/>
                    </exec>
                    <!-- Now ready to send to ATS3 -->

                    <antcall target="sf-send-testpkg" inheritAll="false">
                        <param name="sf.spec.test.package.name" value="${sf.spec.bccheck.package.name}"/>
                    </antcall>    
                </then>
            </if>
        </then>
        <else>
            <echo message="WARNING: PDT_HOME not set, I dont know where the BC tools are installed so cannot continue"/>
        </else>
        </if>
    </target>
    
    <target name="sf-publish" depends="prep-publish">
        <copy todir="${publish.dir}" preservelastmodified="true" failonerror="false">
           <fileset dir="${build.log.dir}"><include name="*.zip"/></fileset>
        </copy>
    </target>

</project>