Replaced section "Package failures by phase/step/severity" with "Package failures by package/severity"
Added internal links from the package/severity breakdown to the peices of the new section.
<?xml version="1.0" encoding="UTF-8"?>
<project name="SF-POSTBUILD" xmlns:hlm="http://www.nokia.com/helium">
<target name="sf-postbuild">
<echo>[SF-POSTBUILD]</echo>
<parallel>
<!-- TAG SOURCE CODE -->
<if>
<istrue value="${sf.spec.tagafterbuild.enable}" />
<then>
<echo message="Apply tag to the source code used in this build"/>
<runtarget target="sf-tag-hg-code"/>
</then>
</if>
<!-- Create MD5s -->
<if>
<istrue value="${sf.spec.md5.enable}"/>
<then>
<echo message="INFO Creating MD5s"/>
<runtarget target="sf-run-evalid"/>
</then>
</if>
<!-- Package up the binaries we built -->
<if>
<istrue value="${sf.spec.package.bin.enable}"/>
<then>
<echo message="INFO Packaging Binaries"/>
<runtarget target="sf-package-binary"/>
<runtarget target="sf-package-tools"/>
<echo message="INFO Validate Zip files"/>
<runtarget target="sf-package-validate"/>
</then>
</if>
<!-- run build analysis tools -->
<runtarget target="sf-run-analysis"/>
<if>
<istrue value="${sf.spec.publish.enable}"/>
<then>
<!-- Generate reports to compare this build to a previous one -->
<runtarget target="sf-compare-to-baseline"/>
</then>
</if>
</parallel>
<!-- Launch smoketest -->
<if><istrue value="${sf.spec.test.sendpkg.enable}"/>
<then>
<runtarget target="sf-build-smoketestpkg"/>
<runtarget target="sf-send-testpkg"/>
</then>
</if>
<!-- Launch BC check -->
<if><istrue value="${sf.spec.bccheck.enable}"/>
<then>
<runtarget target="sf-bc-check"/>
</then>
</if>
<!-- Zip up all the logs -->
<runtarget target="sf-zip-logs"/>
<!-- Publish logs/reports -->
<if>
<istrue value="${sf.spec.publish.enable}" />
<then>
<echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
<runtarget target="sf-publish"/>
</then>
</if>
</target>
<target name="sf-tag-hg-code">
<property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>
<fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"
outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">
<data expandProperties="yes">
ant: antProperties()
data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
</data>
</fmpp>
<ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>
</target>
<target name="sf-run-evalid">
<delete dir="${build.drive}/output/md5"/>
<mkdir dir="${build.drive}/output/md5"/>
<parallel>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/include output/md5/epoc32_include.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/s60 output/md5/epoc32_s60.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/localisation output/md5/epoc32_localisation.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -x ^armv5/udeb -x ^armv5/urel -x ^winscw/udeb -x ^winscw/urel -g epoc32/release output/md5/epoc32_release.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/armv5/udeb output/md5/epoc32_release_armv5_udeb.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/armv5/urel output/md5/epoc32_release_armv5_urel.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/winscw/udeb output/md5/epoc32_release_winscw_udeb.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -x \.sym$ -g epoc32/release/winscw/urel output/md5/epoc32_release_winscw_urel.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/cshlpcmp_template output/md5/epoc32_cshlpcmp_template.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/data output/md5/epoc32_data.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/engdoc output/md5/epoc32_engdoc.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/engineeringtools output/md5/epoc32_engineeringtools.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/gcc output/md5/epoc32_gcc.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/gcc_mingw output/md5/epoc32_gcc_mingw.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/ksa output/md5/epoc32_ksa.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/rom output/md5/epoc32_rom.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/rombuild output/md5/epoc32_rombuild.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/sbs_config output/md5/epoc32_sbs_config.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/sdk_special output/md5/epoc32_sdk_special.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/stdapis output/md5/epoc32_stdapis.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/stubs output/md5/epoc32_stubs.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/tools output/md5/epoc32_tools.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/wins output/md5/epoc32_wins.md5"/>
</exec>
<exec executable="cmd" dir="${build.drive}">
<arg value="/c"/>
<arg value="evalid -g epoc32/winscw output/md5/epoc32_winscw.md5"/>
</exec>
</parallel>
<!-- package MD5s directly into epoc32/relinfo location so that its usable out-of-the-box -->
<mkdir dir="${build.output.dir}/zips/release"/> <!-- Hack to prevent non-existing release dir -->
<zip destfile="${build.output.dir}/zips/release/build_md5.zip">
<zipfileset dir="${build.drive}/output/md5/" prefix="epoc32/relinfo"/>
</zip>
</target>
<target name="sf-package-binary" depends="sf-preprocess-package-config,sf-package-postbuild-rnd">
<!-- Warning: Reverting to using the He zipper will also revert to a single zip for the binaries:
would need to update the template and possibly the script that populates it -->
<!--antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="bin" />
</antcall-->
<parallel>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="-x!epoc32\tools"/>
<arg value="-x!epoc32\build"/>
<arg value="-x!epoc32\release\armv5"/>
<arg value="-x!epoc32\release\winscw"/>
<arg value="-xr!*.sym"/>
<arg value="${build.drive}/output/zips/release/binaries_epoc.zip"/>
<arg value="epoc32\"/>
</exec>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_winscw.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="-xr!*.sym"/>
<arg value="${build.drive}/output/zips/release/binaries_winscw.zip"/>
<arg value="epoc32\release\winscw\"/>
</exec>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_armv5.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="-xr!*.sym"/>
<arg value="${build.drive}/output/zips/release/binaries_armv5.zip"/>
<arg value="epoc32\release\armv5\"/>
</exec>
</parallel>
<!-- Generate release_metadata entries for the above zips -->
<antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="bin-just-metadata" />
</antcall>
</target>
<target name="sf-package-postbuild-rnd" depends="sf-preprocess-package-config">
<antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="rnd-postbuild" />
</antcall>
</target>
<target name="sf-package-tools" depends="sf-preprocess-package-config">
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_tools_epoc32.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
<arg value="${build.drive}/output/zips/release/tools_epoc.zip"/>
<arg value="epoc32/tools"/>
</exec>
<antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="tools" />
</antcall>
</target>
<target name="sf-package-validate">
<exec executable="7z" dir="${build.drive}/output/zips" failonerror="false" output="${build.drive}/output/zips/validate.log">
<arg value="t"/>
<arg value="*.zip"/>
</exec>
<exec executable="7z" dir="${build.drive}/output/zips/release" failonerror="false" output="${build.drive}/output/zips/release/validate.log">
<arg value="t"/>
<arg value="*.zip"/>
</exec>
</target>
<!-- runs analysis of missing bins and source -->
<target name="sf-run-analysis">
<mkdir dir="${build.log.dir}/analysis"/>
<parallel>
<runtarget target="sf-run-analysis-ant"/>
<runtarget target="sf-run-analysis-raptor"/>
<runtarget target="sf-run-analysis-yarp"/>
<runtarget target="sf-run-analysis-whatlog-summary"/>
<runtarget target="sf-run-analysis-missing-files"/>
</parallel>
<if>
<istrue value="${sf.spec.publish.enable}"/>
<then>
<runtarget target="sf-run-analysis-diamonds"/>
<runtarget target="sf-brag-to-diamonds"/>
</then>
</if>
</target>
<target name="sf-run-analysis-ant">
<echo message="Running source analysis of ANT output"/>
<exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">
<arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>
<arg value="*ant*"/>
</exec>
</target>
<target name="sf-run-analysis-raptor">
<echo message="Preprocessing *_compile.log files"/>
<delete file="${build.log.dir}/analysis/${build.id}_preprocess.log"/>
<for param="logfile">
<path>
<fileset dir="${build.log.dir}">
<include name="*_compile.log"/>
<exclude name="*build_check_compile.log"/>
</fileset>
</path>
<sequential>
<propertyregex override="yes" property="preprocessedlogfile" input="@{logfile}" regexp=".*[\\/](.*)_compile\.log" replace="\1_compile_preprocessed.log"/>
<echo message="Preprocessing @{logfile}..."/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" input="@{logfile}" output="${build.log.dir}/analysis/${preprocessedlogfile}" errorProperty="@{logfile}" >
<arg value="${sf.common.config.dir}/tools/raptor/preprocess_log.pl"/>
</exec>
<echo file="${build.log.dir}/analysis/${build.id}_preprocess.log" append="true" message="${@{logfile}}${line.separator}"/>
</sequential>
</for>
<echo message="Extracting whatlog information from *whatlog*_compile_preprocessed.log files"/>
<for param="whatlogfile">
<path>
<fileset dir="${build.log.dir}/analysis">
<include name="*whatlog*_compile_preprocessed.log"/>
</fileset>
</path>
<sequential>
<echo message="Extracting whatlog info from @{whatlogfile}..."/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_whatlog.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
<arg value="--releaseable"/>
<arg value="--log=@{whatlogfile}"/>
<arg value="--basedir=${build.log.dir}"/>
<arg value="--append"/>
</exec>
</sequential>
</for>
<echo message="Extracting error information from *_compile_preprocessed.log files"/>
<for param="raptorlogfile">
<path>
<fileset dir="${build.log.dir}/analysis">
<include name="*_compile_preprocessed.log"/>
</fileset>
</path>
<sequential>
<echo message="Extracting error info from @{raptorlogfile}..."/>
<propertyregex override="yes" property="raptorconfig" input="@{raptorlogfile}" regexp=".*[\\/].*__(.*)\.whatlog_(single|multiple)_thread.*" replace="\1" casesensitive="false" defaultValue="noconfig"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
<arg value="--error"/>
<arg value="--warning"/>
<arg value="--unreciped"/>
<arg value="--recipe"/>
<arg value="--config=${raptorconfig}"/>
<arg value="--log=@{raptorlogfile}"/>
<arg value="--basedir=${build.log.dir}/raptorbits"/>
</exec>
</sequential>
</for>
<echo message="Summarizing Raptor data"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
<arg value="${sf.common.config.dir}/tools/raptor/summarize.pl"/>
<arg value="--raptorbitsdir=${build.log.dir}/raptorbits"/>
<arg value="--outputdir=${build.log.dir}"/>
</exec>
<!-- Now iterate through the generated TSVs to sort them and remove duplicates -->
<for param="tsv">
<path>
<fileset dir="${build.log.dir}">
<include name="releaseables/**/*.tsv"/>
</fileset>
</path>
<sequential>
<exec executable="perl" input="@{tsv}" output="@{tsv}">
<arg value="${sf.common.config.dir}/tools/sortUnique.pl"/>
</exec>
</sequential>
</for>
<!-- Cook the raptor analysis further to produce something in the right format for the BRAG system -->
<exec executable="perl" output="${build.log.dir}/summary/Raptor_BRAG.xml" logError="yes">
<arg value="${sf.common.config.dir}/tools/brag/raptorToBRAG.pl"/>
<arg value="--raptorsummary"/>
<arg value="${build.log.dir}/raptorbits/summary.csv"/>
</exec>
<!-- And copy the XSL so the output can be transformed by a browser -->
<copy file="${sf.common.config.dir}/tools/brag/brag.xsl" toDir="${build.log.dir}/summary/"/>
</target>
<target name="sf-run-analysis-yarp">
<echo message="Running yarp over *_compile.log files"/>
<for param="logfile">
<path>
<fileset dir="${build.log.dir}">
<include name="*_compile.log"/>
<exclude name="*build_check_compile.log"/>
</fileset>
</path>
<sequential>
<propertyregex override="yes" property="yarpfile" input="@{logfile}" regexp=".*[\\|\/](.*)_compile\.log" replace="\1_yarp.csv"/>
<propertyregex override="yes" property="yarpfile_short" input="${yarpfile}" regexp="[^_]*_[^_]*_[^_]*_(.+)_[^_]*_yarp\.csv" replace="YARP_\1"/>
<echo message="Yarping @{logfile}..."/>
<exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${yarpfile}.log" append="true">
<arg value="${sf.common.config.dir}/tools/analysis/yarp.pl"/>
<arg value="@{logfile}"/>
<arg value="${build.log.dir}/analysis/${yarpfile}"/>
</exec>
<exec executable="cmd" output="${build.drive}/output/logs/analysis/tmp_yarp_files.csv" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="${yarpfile_short},${sf.spec.publish.networkdrive}\${sf.spec.job.name}\builds\${sf.spec.job.codeline}\${build.id}\logs\analysis\${yarpfile},${build.drive}\output\logs\analysis\${yarpfile}"/>
</exec>
</sequential>
</for>
<!-- Cook the yarp analysis further to produce something in the right format for the BRAG system -->
<mkdir dir="${build.log.dir}/summary/"/>
<exec executable="perl" output="${build.log.dir}/summary/Yarp_BRAG.xml" logError="yes">
<arg value="${sf.common.config.dir}/tools/brag/yarpToBRAG.pl"/>
<arg value="${build.log.dir}/analysis/*_yarp.csv"/>
</exec>
<exec executable="perl" dir="${build.drive}" failonerror="false" outputproperty="sf.job.totalyarperrors">
<arg value="${sf.common.config.dir}/tools/analysis/parse_yarp_files.pl"/>
<arg value="${build.drive}/output/logs/analysis/tmp_yarp_files.csv"/>
</exec>
<echo message="Total yarp errors: ${sf.job.totalyarperrors}"/>
</target>
<target name="sf-run-analysis-whatlog-summary" >
<sequential>
<parallel>
<runtarget target="sf-run-analysis-list"/>
<runtarget target="sf-run-analysis-whatlog"/>
</parallel>
<runtarget target="sf-run-analysis-whatlog-merge" />
<parallel>
<runtarget target="sf-run-analysis-whatlog-package"/>
<runtarget target="sf-run-analysis-whatlog-collisons"/>
</parallel>
</sequential>
</target>
<target name="sf-run-analysis-list">
<echo message="Running list analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">
<arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>
<arg value="..\"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog">
<echo message="Running whatlog analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">
<arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>
<arg value="..\"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog-merge" >
<echo message="Running summary analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">
<arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>
<arg value="${build.id}_what_results.csv"/>
<arg value="${build.id}_list_results.log"/>
<arg value="${build.drive}/output/zips/release/binaries_epoc_additional.zip"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog-package" >
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_analysecomponents.log">
<arg value="${sf.common.config.dir}/tools/analysis/analyse_components.pl"/>
<arg value="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>
<arg value="${build.id}_what_results.csv_results.csv"/>
<arg value="${sf.project.location}/sysdefs/system_model_os.xml"/>
<arg value="${sf.project.location}/sysdefs/system_model_s60.xml"/>
</exec>
</target>
<target name="sf-run-analysis-whatlog-collisons" >
<echo message="Running collision analysis"/>
<exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_collisions.log">
<arg value="${sf.common.config.dir}/tools/analysis/find_collisions.pl"/>
<arg value="${build.log.dir}/analysis/${build.id}_what_results.csv"/>
</exec>
</target>
<target name="sf-run-analysis-diamonds">
<fmpp sourceFile="${sf.common.config.dir}/diamonds/sf-run-analysis.xml.ftl" outputFile="${build.drive}/output/logs/sf-run-analysis.xml">
<data expandProperties="yes">
ant: antProperties()
raptor_summary: csv(${build.log.dir}/raptorbits/summary.csv,{separator:',',headers:[category,subcategory,severity,config,component,phase,recipe,file,line]})
files: csv(${build.drive}/output/logs/analysis/tmp_yarp_files.csv,{separator:',',headers:[name,path,localpath]})
</data>
</fmpp>
<!-- Send the data to the server -->
<exec executable="python">
<arg value="${sf.common.config.dir}/tools/brag/send_xml_to_diamonds.py"/>
<arg value="-s"/>
<arg value="${diamonds.host}"/>
<arg value="-u"/>
<arg value="${diamonds.build.id}"/>
<arg value="-f"/>
<arg value="${build.log.dir}/sf-run-analysis.xml"/>
</exec>
</target>
<target name="sf-brag-to-diamonds">
<!-- Merge all our bits of XML together -->
<exec executable="perl" output="${build.log.dir}/summary/_BRAG.xml">
<arg value="${sf.common.config.dir}/tools/mergeXML.pl"/>
<arg value="--xsl=brag.xsl"/>
<arg value="--merge=buildStatus,phase(name),step(name),failures(level)"/>
<arg value="${build.log.dir}/summary/*?_BRAG.xml"/>
</exec>
<!-- Run XSL transform to create file to send to diamonds -->
<java jar="${sf.common.config.dir}/sysdefdowngrade/xalan-j_2_7_1/xalan.jar" fork="true">
<arg value="-IN"/>
<arg value="${build.log.dir}/summary/_BRAG.xml"/>
<arg value="-XSL"/>
<arg value="${sf.common.config.dir}/tools/brag/bragForDiamonds.xsl"/>
<arg value="-OUT"/>
<arg value="${temp.build.dir}/bragForDiamonds.xml"/>
</java>
<if>
<istrue value="${sf.spec.publish.enable}"/>
<then>
<!-- Make sure that the summary directory is available to display the BRAG link -->
<mkdir dir="${publish.dir}/summary/"/>
<copy todir="${publish.dir}/summary/" preservelastmodified="true" failonerror="false">
<fileset dir="${build.log.dir}/summary/"><include name="*.*"/></fileset>
</copy>
<!-- Try to obtain the diamonds ID for this build -->
<if>
<not><isset property="diamonds.build.id"/></not>
<then>
<property file="${build.log.dir}/diamonds_build_id.properties"/> <!-- This will fail silently -->
</then>
</if>
<if>
<isset property="diamonds.build.id"/>
<then>
<!-- Send the data to the server -->
<exec executable="python">
<arg value="${sf.common.config.dir}/tools/brag/send_xml_to_diamonds.py"/>
<arg value="-s"/>
<arg value="${diamonds.host}"/>
<arg value="-u"/>
<arg value="${diamonds.build.id}"/>
<arg value="-f"/>
<arg value="${temp.build.dir}/bragForDiamonds.xml"/>
</exec>
</then>
<else>
<echo message="diamonds.build.id is not known - unable to push any build specific information to diamonds server"/>
</else>
</if>
</then>
</if>
</target>
<target name="sf-check-utilities-dir">
<available property="sf-utilities-available" file="${build.drive}/utilities" type="dir"/>
</target>
<target name="sf-compare-to-baseline" depends="sf-diamondize-bom,sf-check-utilities-dir" if="sf-utilities-available">
<property name="sf.releasenotes.wiki.txt" value="${build.log.dir}/releaseNotes.wiki.txt"/>
<delete file="${sf.releasenotes.wiki.txt}"/>
<!-- FCL usage -->
<exec executable="perl" dir="${build.drive}/utilities/releaseAutomation/" output="${build.log.dir}/fcls4releasenotes.log">
<arg value="${build.drive}/utilities/releaseAutomation/fcls4releasenotes.pl"/>
<arg value="--pdkname1=${sf.previous.pdk.tag}"/>
<arg value="--pdkloc2=${build.log.dir}"/>
</exec>
<!-- Mercurial comparison -->
<echo file="${sf.releasenotes.wiki.txt}" append="true">== Mercurial Comparison ==${line.separator}${line.separator}</echo>
<if>
<isset property="sf.previous.pdk.tag"/>
<then>
<echo file="${sf.releasenotes.wiki.txt}" append="true">The Mercurial changes from Nokia were delivered as a bulk update based on '''XXXXXXXXXXXXXXXXXXXXXX'''.${line.separator}${line.separator}List of the Mercurial changes (files added/removed/modified) between ${sf.previous.pdk.tag} and PDK '''XXXXX''' - [[Media:XXXX.txt]].${line.separator}${line.separator}A short study of the results concentrating on the added and removed files has identified these significant package changes:${line.separator}${line.separator}</echo>
<if>
<istrue value="${sf.spec.sourcesync.archive}"/>
<then>
<echo file="${sf.releasenotes.wiki.txt}" append="true">'''Information cannot be derived as source was synced with archive option'''"${line.separator}${line.separator}</echo>
</then>
<else>
<exec executable="perl" dir="${build.drive}/" output="${sf.releasenotes.wiki.txt}" append="true">
<arg value="${build.drive}/utilities/releaseAutomation/mercurialComparison.pl"/>
<arg value="${build.log.dir}/BOM/build-info.xml"/>
<arg value="${sf.previous.pdk.tag}"/>
<arg value="${build.log.dir}/mercurialComparison.tsv"/>
</exec>
</else>
</if>
</then>
<else>
<echo file="${sf.releasenotes.wiki.txt}" append="true">'''Information cannot be provided as the tag for the previous PDK was not provided to the build'''"${line.separator}${line.separator}</echo>
</else>
</if>
<!-- Code churn -->
<!-- TODO? -->
<fixcrlf file="${sf.releasenotes.wiki.txt}"/>
</target>
<!-- package all logs into zipfile for publishing -->
<target name="sf-zip-logs">
<if>
<istrue value="${sf.spec.logs.zip.enable}"/>
<then>
<mkdir dir="${build.output.dir}/zips/release"/> <!-- workaround for when there's no other releaseables, just the logs -->
<zip destfile="${build.output.dir}/zips/release/build_logs.zip" basedir="${build.drive}">
<include name="output/logs/**"/>
<exclude name="output/logs/BOM/**"/>
<exclude name="output/logs/deliverables/**"/>
<exclude name="output/logs/releaseables/**"/>
</zip>
<!-- workaround for the time when when 'sf-run-analysis-raptor' has not been run -->
<mkdir dir="${build.drive}/output/logs/releaseables"/>
<zip destfile="${build.output.dir}/zips/release/build_BOM.zip">
<zipfileset dir="${build.drive}/output/logs/BOM" prefix="build_info/logs/BOM"/>
<zipfileset dir="${build.drive}/output/logs/releaseables" prefix="build_info/logs/releaseables"/>
</zip>
</then>
</if>
</target>
<target name="sf-publish" depends="prep-publish">
<copy todir="${publish.dir}" preservelastmodified="true" failonerror="false">
<fileset dir="${build.output.dir}/zips/release/"><include name="build_*.zip"/></fileset>
</copy>
</target>
<!-- TODO: Make this work for package builds once we have sysmodel story worked out -->
<target name="sf-run-analysis-missing-files" if="sf.spec.splitbuild">
<!-- splitbuild is only set for Platform builds -->
<if><istrue value="${sf.spec.splitbuild}"/>
<then>
<if><istrue value="${sf.spec.os.skipbuild}" />
<then><echo message="Skipping OS file check"/></then>
<else><runtarget target="sf-check-missing-os-files"/></else>
</if>
<if><istrue value="${sf.spec.s60.skipbuild}" />
<then><echo message="Skipping S60 file check"/></then>
<else><runtarget target="sf-check-missing-s60-files"/></else>
</if>
</then>
<else>
<runtarget target="sf-check-missing-os-files"/>
</else>
</if>
</target>
<target name="sf-check-missing-os-files" depends="sf-compile-options">
<hlm:argSet id="sbs.check.tools.var">
<hlm:arg name="config" value="${sf.spec.sbs.tools.config}" />
<hlm:arg name="run-check" value="true" />
</hlm:argSet>
<hlm:argSet id="sbs.check.main.var">
<hlm:arg name="config" value="${sf.spec.sbs.config}" />
<hlm:arg name="run-check" value="true" />
</hlm:argSet>
<antcall target="compile-main" inheritAll="false" inheritRefs="true">
<param name="build.system" value="${sf.spec.build.system}" />
<param name="sysdef.configurations.list" value="${sf.spec.os.sysdef.clean.configurations.list}" />
<param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
<param name="build.id" value ="sbs_check"/>
<reference refid="sbs.check.tools.var" torefid="sbs.var" />
<reference refid="sbs.toolsbuild.options" torefid="sbs.make.options" />
<reference refid="sf.spec.os.system.definition.files" torefid="system.definition.files" />
</antcall>
<if><istrue value="${sf.os.compile.iterate}"/>
<then>
<for list="${sf.spec.sbs.config}" delimiter="," param="sf.spec.check.splitconfig">
<sequential>
<echo message="INFO [Iterative check] @{sf.spec.check.splitconfig}"/>
<hlm:argSet id="sbs.check.iterate.main.var">
<hlm:arg name="config" value="@{sf.spec.check.splitconfig}" />
<hlm:arg name="run-check" value="true" />
</hlm:argSet>
<antcall target="compile-main" inheritAll="false" inheritRefs="true">
<param name="build.system" value="${sf.spec.build.system}" />
<param name="sysdef.configurations.list" value="${sf.spec.os.sysdef.clean.configurations.list}" />
<param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
<param name="build.id" value ="sbs_check"/>
<reference refid="sbs.check.iterate.main.var" torefid="sbs.var" />
<reference refid="sbs.fullbuild.options" torefid="sbs.make.options" />
<reference refid="sf.spec.os.system.definition.files" torefid="system.definition.files" />
</antcall>
</sequential>
</for>
</then>
<else>
<antcall target="compile-main" inheritAll="false" inheritRefs="true">
<param name="build.system" value="${sf.spec.build.system}" />
<param name="sysdef.configurations.list" value="${sf.spec.os.sysdef.clean.configurations.list}" />
<param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
<param name="build.id" value ="sbs_check"/>
<reference refid="sbs.check.main.var" torefid="sbs.var" />
<reference refid="sbs.fullbuild.options" torefid="sbs.make.options" />
<reference refid="sf.spec.os.system.definition.files" torefid="system.definition.files" />
</antcall>
</else>
</if>
</target>
<target name="sf-check-missing-s60-files" depends="sf-compile-options">
<hlm:argSet id="sbs.check.tools.var">
<hlm:arg name="config" value="${sf.spec.sbs.tools.config}" />
<hlm:arg name="run-check" value="true" />
</hlm:argSet>
<hlm:argSet id="sbs.check.main.var">
<hlm:arg name="config" value="${sf.spec.sbs.config}" />
<hlm:arg name="run-check" value="true" />
</hlm:argSet>
<antcall target="compile-main" inheritAll="false" inheritRefs="true">
<param name="build.system" value="${sf.spec.build.system}" />
<param name="sysdef.configurations.list" value="${sf.spec.s60.sysdef.clean.configurations.list}" />
<param name="sf.spec.sysdef.version" value ="${sf.spec.s60.sysdef.version}"/>
<param name="build.id" value ="sbs_check"/>
<reference refid="sbs.check.tools.var" torefid="sbs.var" />
<reference refid="sbs.toolsbuild.options" torefid="sbs.make.options" />
<reference refid="sf.spec.s60.system.definition.files" torefid="system.definition.files" />
</antcall>
<antcall target="compile-main" inheritAll="false" inheritRefs="true">
<param name="build.system" value="${sf.spec.build.system}" />
<param name="sysdef.configurations.list" value="${sf.spec.s60.sysdef.clean.configurations.list}" />
<param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
<param name="build.id" value ="sbs_check"/>
<reference refid="sbs.check.main.var" torefid="sbs.var" />
<reference refid="sbs.fullbuild.options" torefid="sbs.make.options" />
<reference refid="sf.spec.s60.system.definition.files" torefid="system.definition.files" />
</antcall>
</target>
<target name="sf-create-public-PDK" depends="sf-prebuild,sf-run-sfl-licence-munging" >
<if>
<istrue value="${sf.spec.md5.enable}"/>
<then>
<echo message="INFO Creating MD5s"/>
<runtarget target="sf-run-evalid"/>
</then>
</if>
<!-- Package up the binaries we built -->
<if>
<istrue value="${sf.spec.package.bin.enable}"/>
<then>
<echo message="INFO Packaging Binaries"/>
<runtarget target="sf-package-binary"/>
<runtarget target="sf-package-tools"/>
<echo message="INFO Validate Zip files"/>
<runtarget target="sf-package-validate"/>
</then>
</if>
<runtarget target="sf-zip-logs"/>
<if>
<istrue value="${sf.spec.publish.enable}" />
<then>
<echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
<runtarget target="sf-publish"/>
</then>
</if>
</target>
<target name="sf-run-sfl-licence-munging" depends="sf-check-utilities-dir" if="sf-utilities-available">
<echo message="Running SFL Licence Munging writing log to ${build.log.dir}"/>
<exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/postbuild_sfl-licence_munging_results.log">
<arg value="${build.drive}/utilities/williamr/convert_to_eula.pl"/>
</exec>
</target>
</project>