common/build.postbuild.xml
author Simon Howkins <simonh@symbian.org>
Mon, 05 Oct 2009 18:14:18 +0100
changeset 592 85da6704f82d
parent 589 a18cdecf36b3
child 599 27e421bea313
permissions -rw-r--r--
Added target to push a collated and calculated BRAG status to diamonds.

<?xml version="1.0" encoding="UTF-8"?>
<project name="SF-POSTBUILD" xmlns:hlm="http://www.nokia.com/helium">
    <target name="sf-postbuild">
        <echo>[SF-POSTBUILD]</echo>
        <parallel>                
            <!-- TAG SOURCE CODE -->
            <if>
                <istrue value="${sf.spec.tagafterbuild.enable}" />
                <then>
                    <echo message="Apply tag to the source code used in this build"/>
                    <runtarget target="sf-tag-hg-code"/>
                </then>
            </if>
            
            <!-- Create MD5s -->
            <if>
                <istrue value="${sf.spec.md5.enable}"/>
                <then>
                    <echo message="INFO Creating MD5s"/>
                    <runtarget target="sf-run-evalid"/>
                </then>
            </if>
            
            <!-- Package up the binaries we built -->
            <if>
                <istrue value="${sf.spec.package.bin.enable}"/>
                <then>
                    <echo message="INFO Packaging Binaries"/>
                    <runtarget target="sf-package-binary"/>
                    <runtarget target="sf-package-tools"/>
    
                    <echo message="INFO Validate Zip files"/>
                    <runtarget target="sf-package-validate"/>
                </then>
            </if>
            
            <!-- run build analysis tools -->
            <runtarget target="sf-run-analysis"/>
            
	    <!-- Generate reports to compare this build to a previous one -->
            <runtarget target="sf-compare-to-baseline"/>
        </parallel>
        
        <!-- Launch smoketest -->
        <if><istrue value="${sf.spec.test.sendpkg.enable}"/>
            <then>
                <runtarget target="sf-build-smoketestpkg"/>
                <runtarget target="sf-send-testpkg"/>
            </then>
        </if>

        <!-- Launch BC check -->
        <if><istrue value="${sf.spec.bccheck.enable}"/>
            <then>
                <runtarget target="sf-bc-check"/>
            </then>
        </if>

        <!-- Zip up all the logs -->
        <runtarget target="sf-zip-logs"/>

        <!-- Publish logs/reports -->
        <if>
            <istrue value="${sf.spec.publish.enable}" />
            <then>
                <echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
                <runtarget target="sf-publish"/>
            </then>
        </if>
    </target>

    <target name="sf-tag-hg-code">
        <property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>
        <fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"
              outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">
            <data expandProperties="yes">
                ant: antProperties()
                data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
            </data>
        </fmpp>
        <ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>
    </target>

    <target name="sf-run-evalid">
        <delete dir="${build.drive}/output/md5"/>
        <mkdir  dir="${build.drive}/output/md5"/>

        <parallel>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/include output/md5/epoc32_include.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/s60 output/md5/epoc32_s60.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/localisation output/md5/epoc32_localisation.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -x ^armv5/udeb -x ^armv5/urel -x ^winscw/udeb -x ^winscw/urel -g epoc32/release output/md5/epoc32_release.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/armv5/udeb output/md5/epoc32_release_armv5_udeb.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/armv5/urel output/md5/epoc32_release_armv5_urel.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/winscw/udeb output/md5/epoc32_release_winscw_udeb.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -x \.sym$ -g epoc32/release/winscw/urel output/md5/epoc32_release_winscw_urel.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/cshlpcmp_template 	output/md5/epoc32_cshlpcmp_template.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/data output/md5/epoc32_data.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/engdoc output/md5/epoc32_engdoc.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/engineeringtools output/md5/epoc32_engineeringtools.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/gcc output/md5/epoc32_gcc.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/gcc_mingw output/md5/epoc32_gcc_mingw.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/ksa output/md5/epoc32_ksa.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/rom output/md5/epoc32_rom.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/rombuild output/md5/epoc32_rombuild.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/sbs_config output/md5/epoc32_sbs_config.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/sdk_special output/md5/epoc32_sdk_special.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/stdapis output/md5/epoc32_stdapis.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/stubs output/md5/epoc32_stubs.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/tools output/md5/epoc32_tools.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/wins output/md5/epoc32_wins.md5"/>
        </exec>
        <exec executable="cmd" dir="${build.drive}">
            <arg value="/c"/>
            <arg value="evalid -g epoc32/winscw output/md5/epoc32_winscw.md5"/>
        </exec>
        </parallel>
        
        <!-- package MD5s directly into epoc32/relinfo location so that its usable out-of-the-box -->
        <zip destfile="${build.output.dir}/zips/release/build_md5.zip">
            <zipfileset dir="${build.drive}/output/md5/" prefix="epoc32/relinfo"/>
        </zip>
    </target>    
    
    <target name="sf-package-binary" depends="sf-preprocess-package-config,sf-package-postbuild-rnd">
        <!-- Warning: Reverting to using the He zipper will also revert to a single zip for the binaries:
             would need to update the template and possibly the script that populates it -->
        <!--antcall target="sf-zip-content">
            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
            <param name="zip.target.name" value="bin" />
        </antcall-->
        <parallel>
            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">
                <arg value="a"/>
                <arg value="-tzip"/>
                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
                <arg value="-x!epoc32\tools"/>
                <arg value="-x!epoc32\build"/>
                <arg value="-x!epoc32\release\armv5"/>
                <arg value="-x!epoc32\release\winscw"/>
                <arg value="-xr!*.sym"/>
                <arg value="${build.drive}/output/zips/release/binaries_epoc.zip"/>
                <arg value="epoc32\"/>
            </exec>
            
            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_winscw.log">
                <arg value="a"/>
                <arg value="-tzip"/>
                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
                <arg value="-xr!*.sym"/>
                <arg value="${build.drive}/output/zips/release/binaries_winscw.zip"/>
                <arg value="epoc32\release\winscw\"/>
            </exec>
            
            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_armv5.log">
                <arg value="a"/>
                <arg value="-tzip"/>
                <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
                <arg value="-xr!*.sym"/>
                <arg value="${build.drive}/output/zips/release/binaries_armv5.zip"/>
                <arg value="epoc32\release\armv5\"/>
            </exec>
        </parallel>
        <!-- Generate release_metadata entries for the above zips -->
        <antcall target="sf-zip-content">
            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
            <param name="zip.target.name" value="bin-just-metadata" />
        </antcall>
    </target>

    <target name="sf-package-postbuild-rnd" depends="sf-preprocess-package-config">
        <antcall target="sf-zip-content">
            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
            <param name="zip.target.name" value="rnd-postbuild" />
        </antcall>
    </target>

    <target name="sf-package-tools" depends="sf-preprocess-package-config">
        <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_tools_epoc32.log">
            <arg value="a"/>
            <arg value="-tzip"/>
            <arg value="-x@${build.log.dir}/rnd_excludefile.txt"/>
            <arg value="${build.drive}/output/zips/release/tools_epoc.zip"/> 
            <arg value="epoc32/tools"/>
        </exec>
        <antcall target="sf-zip-content">
            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
            <param name="zip.target.name" value="tools" />
        </antcall>
    </target>
    
    <target name="sf-package-validate">
        <exec executable="7z" dir="${build.drive}/output/zips" failonerror="false" output="${build.drive}/output/zips/validate.log">
            <arg value="t"/>
            <arg value="*.zip"/>
        </exec>  
        <exec executable="7z" dir="${build.drive}/output/zips/release" failonerror="false" output="${build.drive}/output/zips/release/validate.log">
            <arg value="t"/>
            <arg value="*.zip"/>
        </exec>  
    </target>

    <!-- runs analysis of missing bins and source -->
    <target name="sf-run-analysis">
        <mkdir dir="${build.log.dir}/analysis"/>
        <parallel>
          <runtarget target="sf-run-analysis-ant"/>
          <runtarget target="sf-run-analysis-raptor"/>
          <runtarget target="sf-run-analysis-yarp"/>
          <runtarget target="sf-run-analysis-whatlog-summary"/>
          <runtarget target="sf-run-analysis-missing-files"/>
        </parallel>
        <if>
          <istrue value="${sf.spec.publish.enable}"/>
            <then>
            <runtarget target="sf-run-analysis-diamonds"/>
            </then>
        </if>
	<runtarget target="sf-brag-to-diamonds"/>
    </target>

    <target name="sf-run-analysis-ant">    
        <echo message="Running source analysis of ANT output"/>
        <exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">
            <arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>
            <arg value="*ant*"/>
        </exec>
    </target>

    <target name="sf-run-analysis-raptor">            
      <echo message="Preprocessing *_compile.log files"/>
      <delete file="${build.log.dir}/analysis/${build.id}_preprocess.log"/>
      <for param="logfile">
        <path>
          <fileset dir="${build.log.dir}">
            <include name="*_compile.log"/>
            <exclude name="*build_check_compile.log"/>
          </fileset>
        </path>
        <sequential>
          <propertyregex override="yes" property="preprocessedlogfile" input="@{logfile}" regexp=".*[\\/](.*)_compile\.log" replace="\1_compile_preprocessed.log"/>
          <echo message="Preprocessing @{logfile}..."/>
          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" input="@{logfile}" output="${build.log.dir}/analysis/${preprocessedlogfile}" errorProperty="@{logfile}" >
            <arg value="${sf.common.config.dir}/tools/raptor/preprocess_log.pl"/>
          </exec>
	  <echo file="${build.log.dir}/analysis/${build.id}_preprocess.log" append="true" message="${@{logfile}}${line.separator}"/>
        </sequential>
      </for>
      
      <echo message="Extracting whatlog information from *whatlog*_compile_preprocessed.log files"/>
      <for param="whatlogfile">
        <path>
          <fileset dir="${build.log.dir}/analysis">
            <include name="*whatlog*_compile_preprocessed.log"/>
          </fileset>
        </path>
        <sequential>
          <echo message="Extracting whatlog info from @{whatlogfile}..."/>
          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_whatlog.log" append="true">
            <arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
            <arg value="--releaseable"/>
            <arg value="--log=@{whatlogfile}"/>
            <arg value="--basedir=${build.log.dir}"/>
            <arg value="--append"/>
          </exec>
        </sequential>
      </for>
      
      <echo message="Extracting error information from *_compile_preprocessed.log files"/>
      <for param="raptorlogfile">
        <path>
          <fileset dir="${build.log.dir}/analysis">
            <include name="*_compile_preprocessed.log"/>
          </fileset>
        </path>
        <sequential>
          <echo message="Extracting error info from @{raptorlogfile}..."/>
          <propertyregex override="yes" property="raptorconfig" input="@{raptorlogfile}" regexp=".*[\\/].*__(.*)\.whatlog_(single|multiple)_thread.*" replace="\1" casesensitive="false" defaultValue="noconfig"/>
          <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
            <arg value="${sf.common.config.dir}/tools/raptor/parse.pl"/>
            <arg value="--error"/>
            <arg value="--warning"/>
            <arg value="--unreciped"/>
            <arg value="--recipe"/>
            <arg value="--config=${raptorconfig}"/>
            <arg value="--log=@{raptorlogfile}"/>
            <arg value="--basedir=${build.log.dir}/raptorbits"/>
          </exec>
        </sequential>
      </for>
      
      <echo message="Summarizing Raptor data"/>
      <exec executable="perl" dir="${sf.common.config.dir}/tools/raptor" failonerror="false" output="${build.log.dir}/analysis/${build.id}_raptorparse.log" append="true">
        <arg value="${sf.common.config.dir}/tools/raptor/summarize.pl"/>
        <arg value="--raptorbitsdir=${build.log.dir}/raptorbits"/>
        <arg value="--outputdir=${build.log.dir}"/>
      </exec>
          
      <!-- Now iterate through the generated TSVs to sort them and remove duplicates -->
      <for param="tsv">
        <path>
          <fileset dir="${build.log.dir}">
            <include name="releaseables/**/*.tsv"/>
          </fileset>
        </path>
        <sequential>
          <exec executable="perl" input="@{tsv}" output="@{tsv}">
            <arg value="${sf.common.config.dir}/tools/sortUnique.pl"/>
          </exec>
        </sequential>
      </for>

      <!-- Cook the raptor analysis further to produce something in the right format for the BRAG system -->
      <exec executable="perl" output="${build.log.dir}/summary/Raptor_BRAG.xml" logError="yes">
        <arg value="${sf.common.config.dir}/tools/brag/raptorToBRAG.pl"/>
        <arg value="--raptorsummary"/>
        <arg value="${build.log.dir}/raptorbits/summary.csv"/>
      </exec>
      <!-- And copy the XSL so the output can be transformed by a browser -->
      <copy file="${sf.common.config.dir}/tools/brag/brag.xsl" toDir="${build.log.dir}/summary/"/>
    </target>

    <target name="sf-run-analysis-yarp">          
      <echo message="Running yarp over *_compile.log files"/>
      <for param="logfile">
        <path>
          <fileset dir="${build.log.dir}">
            <include name="*_compile.log"/>
            <exclude name="*build_check_compile.log"/>
          </fileset>
        </path>
        <sequential>
          <propertyregex override="yes" property="yarpfile"  input="@{logfile}" regexp=".*[\\|\/](.*)_compile\.log" replace="\1_yarp.csv"/>
          <propertyregex override="yes" property="yarpfile_short"  input="${yarpfile}" regexp="[^_]*_[^_]*_[^_]*_(.+)_[^_]*_yarp\.csv" replace="YARP_\1"/>
          <echo message="Yarping @{logfile}..."/>
          <exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${yarpfile}.log" append="true">
            <arg value="${sf.common.config.dir}/tools/analysis/yarp.pl"/>
            <arg value="@{logfile}"/>
            <arg value="${build.log.dir}/analysis/${yarpfile}"/>
          </exec>
          <exec executable="cmd" output="${build.drive}/output/logs/analysis/tmp_yarp_files.csv" append="true">
            <arg value="/c"/>
            <arg value="echo"/>
            <arg value="${yarpfile_short},${sf.spec.publish.networkdrive}\${sf.spec.job.name}\builds\${sf.spec.job.codeline}\${build.id}\logs\analysis\${yarpfile},${build.drive}\output\logs\analysis\${yarpfile}"/>
          </exec>
        </sequential>
      </for>
      
      <exec executable="perl" dir="${build.drive}" failonerror="false" outputproperty="sf.job.totalyarperrors">
        <arg value="${sf.common.config.dir}/tools/analysis/parse_yarp_files.pl"/>
        <arg value="${build.drive}/output/logs/analysis/tmp_yarp_files.csv"/>
      </exec>
      <echo message="Total yarp errors: ${sf.job.totalyarperrors}"/>
    </target>
    
    <target name="sf-run-analysis-whatlog-summary" >
        <sequential>
          <parallel>
            <runtarget target="sf-run-analysis-list"/>
            <runtarget target="sf-run-analysis-whatlog"/>
          </parallel>
          <runtarget target="sf-run-analysis-whatlog-merge" />
          <parallel>
            <runtarget target="sf-run-analysis-whatlog-package"/>
            <runtarget target="sf-run-analysis-whatlog-collisons"/>
          </parallel>
        </sequential>
    </target>
    
    <target name="sf-run-analysis-list">    
        <echo message="Running list analysis"/>
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">
            <arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>
            <arg value="..\"/>
        </exec>
    </target>

    <target name="sf-run-analysis-whatlog">    
        <echo message="Running whatlog analysis"/>
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">
            <arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>
            <arg value="..\"/>
        </exec>
    </target>

    <target name="sf-run-analysis-whatlog-merge" >        
        <echo message="Running summary analysis"/>
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">
            <arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>
            <arg value="${build.id}_what_results.csv"/>
            <arg value="${build.id}_list_results.log"/>
            <arg value="${build.drive}/output/zips/release/binaries_epoc_additional.zip"/>
        </exec>
    </target>
    
    <target name="sf-run-analysis-whatlog-package" >        
        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_analysecomponents.log">
            <arg value="${sf.common.config.dir}/tools/analysis/analyse_components.pl"/>
            <arg value="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>
            <arg value="${build.id}_what_results.csv_results.csv"/>
            <arg value="${sf.project.location}/sysdefs/system_model_os.xml"/>
            <arg value="${sf.project.location}/sysdefs/system_model_s60.xml"/>
        </exec>
    </target>
    
    <target name="sf-run-analysis-whatlog-collisons" >        
        <echo message="Running collision analysis"/>
        <exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_collisions.log">
            <arg value="${sf.common.config.dir}/tools/analysis/find_collisions.pl"/>
            <arg value="${build.log.dir}/analysis/${build.id}_what_results.csv"/>
        </exec>
    </target>

    <target name="sf-run-analysis-diamonds">      
      <fmpp sourceFile="${sf.common.config.dir}/diamonds/sf-run-analysis.xml.ftl" outputFile="${build.drive}/output/logs/sf-run-analysis.xml">
        <data expandProperties="yes">
          ant: antProperties()
          raptor_summary: csv(${build.log.dir}/raptorbits/summary.csv,{separator:',',headers:[category,subcategory,severity,config,component,phase,recipe,file,line]})
          files: csv(${build.drive}/output/logs/analysis/tmp_yarp_files.csv,{separator:',',headers:[name,path,localpath]})
        </data>
      </fmpp>
    </target>    

    <target name="sf-brag-to-diamonds">
        <!-- Merge all our bits of XML together -->
        <exec executable="perl" output="${build.log.dir}/summary/_BRAG.xml">
            <arg value="${sf.common.config.dir}/tools/mergeXML.pl"/>
            <arg value="--xsl=brag.xsl"/>
            <arg value="--merge=buildStatus,phase(name),step(name),failures(level)"/>
            <arg value="${build.log.dir}/summary/*?_BRAG.xml"/>
        </exec>
        <!-- Run XSL transform to create file to send to diamonds -->
        <java jar="${sf.common.config.dir}/sysdefdowngrade/xalan-j_2_7_1/xalan.jar" fork="true">
            <arg value="-IN"/>
            <arg value="${build.log.dir}/summary/_BRAG.xml"/>
            <arg value="-XSL"/>
            <arg value="${sf.common.config.dir}/tools/brag/bragForDiamonds.xsl"/>
            <arg value="-OUT"/>
            <arg value="${temp.build.dir}/bragForDiamonds.xml"/>
        </java>
        <if>
            <istrue value="${sf.spec.publish.enable}"/>
            <then>
                <!-- Try to obtain the diamonds ID for this build -->
                <if>
                    <isset property="diamonds.build.id"/>
                    <else>
                        <property file="${build.log.dir}/diamonds.build.id.properties"/> <!-- This will fail silently -->
                    </else>
                </if>
                <if>
                    <isset property="diamonds.build.id"/>
                    <then>
                        <!-- Send the data to the server -->
                        <exec executable="python">
                            <arg value="${sf.common.config.dir}/tools/brag/send_xml_to_diamonds.py"/>
                            <arg value="-s"/>
                            <arg value="${diamonds.host}"/>
                            <arg value="-u"/>
                            <arg value="/diamonds/builds/${diamonds.build.id}"/>
                            <arg value="-f"/>
                            <arg value="${temp.build.dir}/bragForDiamonds.xml"/>
                        </exec>
                    </then>
                    <else>
                        <echo message="diamonds.build.id is not known - unable to push any build specific information to diamonds server"/>
                    </else>
                </if>
            </then>
        </if>
    </target>

    <target name="sf-check-utilities-dir">
        <available property="sf-utilities-available" file="${build.drive}/utilities" type="dir"/>
    </target>

    <target name="sf-compare-to-baseline" depends="sf-diamondize-bom,sf-check-utilities-dir" if="sf-utilities-available">
        <property name="sf.releasenotes.wiki.txt" value="${build.log.dir}/releaseNotes.wiki.txt"/>
        <delete file="${sf.releasenotes.wiki.txt}"/>
        <!-- FCL usage -->
        <exec executable="perl" dir="${build.drive}/utilities/releaseAutomation/" output="${build.log.dir}/fcls4releasenotes.log">
            <arg value="${build.drive}/utilities/releaseAutomation/fcls4releasenotes.pl"/>
            <arg value="--pdkname1=${sf.previous.pdk.tag}"/>
            <arg value="--pdkloc2=${build.log.dir}"/>
        </exec>
        <!-- Mercurial comparison -->
        <echo file="${sf.releasenotes.wiki.txt}" append="true">== Mercurial Comparison ==${line.separator}${line.separator}</echo>
        <if>
            <isset property="sf.previous.pdk.tag"/>
            <then>
                <echo file="${sf.releasenotes.wiki.txt}" append="true">The Mercurial changes from Nokia were delivered as a bulk update based on '''XXXXXXXXXXXXXXXXXXXXXX'''.${line.separator}${line.separator}List of the Mercurial changes (files added/removed/modified) between ${sf.previous.pdk.tag} and PDK '''XXXXX''' - [[Media:XXXX.txt]].${line.separator}${line.separator}A short study of the results concentrating on the added and removed files has identified these significant package changes:${line.separator}${line.separator}</echo>
                <if>
                    <istrue value="${sf.spec.sourcesync.archive}"/>
                    <then>
                        <echo file="${sf.releasenotes.wiki.txt}" append="true">'''Information cannot be derived as source was synced with archive option'''"${line.separator}${line.separator}</echo>
                    </then>
                    <else>
                        <exec executable="perl" dir="${build.drive}/" output="${sf.releasenotes.wiki.txt}" append="true">
                            <arg value="${build.drive}/utilities/releaseAutomation/mercurialComparison.pl"/>
                            <arg value="${build.log.dir}/BOM/build-info.xml"/>
                            <arg value="${sf.previous.pdk.tag}"/>
                            <arg value="${build.log.dir}/mercurialComparison.tsv"/>
                        </exec>
                    </else>
                </if>
            </then>
            <else>
                <echo file="${sf.releasenotes.wiki.txt}" append="true">'''Information cannot be provided as the tag for the previous PDK was not provided to the build'''"${line.separator}${line.separator}</echo>
            </else>
        </if>
        
        <!-- Code churn -->
        <!-- TODO? -->
        <fixcrlf file="${sf.releasenotes.wiki.txt}"/>
    </target>

    <!-- package all logs into zipfile for publishing -->
    <target name="sf-zip-logs">
        <if>
            <istrue value="${sf.spec.logs.zip.enable}"/>
            <then>
                <mkdir dir="${build.output.dir}/zips/release"/> <!-- workaround for when there's no other releaseables, just the logs -->
                <zip destfile="${build.output.dir}/zips/release/build_logs.zip" basedir="${build.drive}"> 
                    <include name="output/logs/**"/>
                    <exclude name="output/logs/BOM/**"/>
                    <exclude name="output/logs/deliverables/**"/>
                    <exclude name="output/logs/releaseables/**"/>
                </zip>
                <!-- workaround for the time when when 'sf-run-analysis-raptor' has not been run -->
                <mkdir dir="${build.drive}/output/logs/releaseables"/> 
                <zip destfile="${build.output.dir}/zips/release/build_BOM.zip">
                    <zipfileset dir="${build.drive}/output/logs/BOM" prefix="build_info/logs/BOM"/>
                    <zipfileset dir="${build.drive}/output/logs/releaseables" prefix="build_info/logs/releaseables"/>
                </zip>
            </then>
        </if>
    </target>
    
    <target name="sf-publish" depends="prep-publish">
        <copy todir="${publish.dir}" preservelastmodified="true" failonerror="false">
           <fileset dir="${build.output.dir}/zips/release/"><include name="build_*.zip"/></fileset>
        </copy>
    </target>

    <!-- TODO: Make this work for package builds once we have sysmodel story worked out -->
    <target name="sf-run-analysis-missing-files" if="sf.spec.splitbuild">
    <!-- splitbuild is only set for Platform builds -->
       <if><istrue value="${sf.spec.splitbuild}"/>
       <then>
            <if><istrue value="${sf.spec.os.skipbuild}" />
                <then><echo message="Skipping OS file check"/></then>
                <else><runtarget target="sf-check-missing-os-files"/></else>
            </if>

            <if><istrue value="${sf.spec.s60.skipbuild}" />
                <then><echo message="Skipping S60 file check"/></then>
                <else><runtarget target="sf-check-missing-s60-files"/></else>
            </if>
       </then>
       <else>
            <runtarget target="sf-check-missing-os-files"/>
       </else>
    </if>
    </target>
    
    <target name="sf-check-missing-os-files">
        <hlm:argSet id="sbs.check.tools.var">
                <hlm:arg name="config" value="${sf.spec.sbs.tools.config}" />
                <hlm:arg name="run-check" value="true" />
        </hlm:argSet>
     
        <hlm:argSet id="sbs.check.main.var">
                <hlm:arg name="config" value="${sf.spec.sbs.config}" />
                <hlm:arg name="run-check" value="true" />
        </hlm:argSet>     
        <antcall target="compile-main" inheritAll="false" inheritRefs="true">
            <param name="build.system" value="${sf.spec.build.system}" />
            <param name="sysdef.configurations.list" value="${sf.spec.os.sysdef.clean.configurations.list}" />
            <param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
            <param name="build.id" value ="sbs_check"/>
            <reference refid="sbs.check.tools.var" torefid="sbs.var" />
            <reference refid="sbs.toolsbuild.options" torefid="sbs.make.options" />
            <reference refid="sf.spec.os.system.definition.files" torefid="system.definition.files" />
        </antcall> 
        <antcall target="compile-main" inheritAll="false" inheritRefs="true">
            <param name="build.system" value="${sf.spec.build.system}" />
            <param name="sysdef.configurations.list" value="${sf.spec.os.sysdef.clean.configurations.list}" />
            <param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
            <param name="build.id" value ="sbs_check"/>
            <reference refid="sbs.check.main.var" torefid="sbs.var" />
            <reference refid="sbs.fullbuild.options" torefid="sbs.make.options" />
            <reference refid="sf.spec.os.system.definition.files" torefid="system.definition.files" />
        </antcall> 
    </target>

    <target name="sf-check-missing-s60-files">
    
        <hlm:argSet id="sbs.check.tools.var">
                <hlm:arg name="config" value="${sf.spec.sbs.tools.config}" />
                <hlm:arg name="run-check" value="true" />
        </hlm:argSet>
     
        <hlm:argSet id="sbs.check.main.var">
                <hlm:arg name="config" value="${sf.spec.sbs.config}" />
                <hlm:arg name="run-check" value="true" />
        </hlm:argSet>     
        <antcall target="compile-main" inheritAll="false" inheritRefs="true">
            <param name="build.system" value="${sf.spec.build.system}" />
            <param name="sysdef.configurations.list" value="${sf.spec.s60.sysdef.clean.configurations.list}" />
            <param name="sf.spec.sysdef.version" value ="${sf.spec.s60.sysdef.version}"/>
            <param name="build.id" value ="sbs_check"/>
            <reference refid="sbs.check.tools.var" torefid="sbs.var" />
            <reference refid="sbs.toolsbuild.options" torefid="sbs.make.options" />
            <reference refid="sf.spec.s60.system.definition.files" torefid="system.definition.files" />
        </antcall> 
        <antcall target="compile-main" inheritAll="false" inheritRefs="true">
            <param name="build.system" value="${sf.spec.build.system}" />
            <param name="sysdef.configurations.list" value="${sf.spec.s60.sysdef.clean.configurations.list}" />
            <param name="sf.spec.sysdef.version" value ="${sf.spec.os.sysdef.version}"/>
            <param name="build.id" value ="sbs_check"/>
            <reference refid="sbs.check.main.var" torefid="sbs.var" />
            <reference refid="sbs.fullbuild.options" torefid="sbs.make.options" />
            <reference refid="sf.spec.s60.system.definition.files" torefid="system.definition.files" />
        </antcall>
        
    </target>
    
    <target name="sf-create-public-PDK" depends="sf-prebuild,sf-run-sfl-licence-munging" >
        <if>
            <istrue value="${sf.spec.md5.enable}"/>
            <then>
                <echo message="INFO Creating MD5s"/>
                <runtarget target="sf-run-evalid"/>
            </then>
        </if>
        
        <!-- Package up the binaries we built -->
        <if>
            <istrue value="${sf.spec.package.bin.enable}"/>
            <then>
                <echo message="INFO Packaging Binaries"/>
                <runtarget target="sf-package-binary"/>
                <runtarget target="sf-package-tools"/>

                <echo message="INFO Validate Zip files"/>
                <runtarget target="sf-package-validate"/>
            </then>
        </if>
        <runtarget target="sf-zip-logs"/>
        <if>
            <istrue value="${sf.spec.publish.enable}" />
            <then>
                <echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
                <runtarget target="sf-publish"/>
            </then>
        </if>
    </target>


    <target name="sf-run-sfl-licence-munging" depends="sf-check-utilities-dir" if="sf-utilities-available">    
        <echo message="Running SFL Licence Munging writing log to ${build.log.dir}"/>
        <exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/postbuild_sfl-licence_munging_results.log">
          <arg value="${build.drive}/utilities/williamr/convert_to_eula.pl"/>
        </exec>
    </target>

</project>