Added copyright messages

Added new attributes found in v3 system definitions

Script now outputs info message if sources.csv specifies a file that's not in the package (irrespective of whether it will try to use it).

Removed the tools copy of create-canonical-sysdef-file, as it can use the common version. Removed test for Helium 7 as it's now standard.

Removed support for Helium 5, and therefore was able to simplify sf-compile significantly.

Removed obsolete target - we're no longer tryinging to support Helium 5 and 7 at the same time.

Add replaceregex for incubator layer to platform build.xml

Adjusted release tagging, so that it clones from the package source, not dst, and hence it's much less likely that the tagging operation will create multiple heads on the TAGS branch.

Add build of naviengine SMP minigui rom

Added tag PDK_4.0.a for changeset 13e40df94492

Added tag PDK_3.0.3 for changeset 26a71d6a561e

Remove auto addition of Smoke Test Report to BIT db

Fixed merging of BRAG elements so that the collated results should appear in time order, and hence in phase/step order as well.

Added a post build check that the release zips don't collide. Collisions are BRAG affecting.

add step to build naviengine miniGUI rom

Simplified code for reading ATS worker root. Plus clearer error message if it cannot be read.

Add reallyclean step prior to tools model build

Added Orbit tools support.

Merge.

Changed make tool to mingw32-make.

Added make stage of tools build.

Removed template specific stuff.

Removed conditions in exec step.

Removed conditional creating of configure step.

Make sure new run-qmake.ant.xml.ftl is used.

Added file to configure Orbit

Added a template to build Orbit tools.

Add properties to enable C100797 for Smoke testing

Use correct tools model location

Fix: Link to Hudson console for platform builds in BIT points to wrong Hudson

Added BIT db interface for Test Results

Enable option to only upload testing data (used for migration)

Make bldmelast stage conditional to avoid breaking builds without one defined

Made changes to compile.ant.xml to include the tools_model.xml

compile.ant.xml updated to compile tools_model.xml.

Enable option to check that the build_id_string is unique

Enable update of build without removing entries first. Add remove operation

Added default value for content of RnD sources.csv, so it doesn't cause problems if there's no file there

Add code to update RCL_3 package models from symbian3 system model

Added entries to package armv5smp binaries in dedicated archives (when we start building them).

Bug 3748: Please separate ROM images into a separate zip file \epoc32\rom\* and \epoc32\rombuild\* now in separate archive (apart from items which are included in the tools zip)

Move addition of link to Hudson console log at the beginning of the build, so that if the build fails there is a better chance that the link is available

Bug 3750: Use .7z extension for PDK zip files created with LZMA compression Commented out the renaming of the files, and the adjustment to release_metadata.xml, as getenv (part of helium) is broken by the change - it only processes *.zip

Bug 3750: Use .7z extension for PDK zip files created with LZMA compression Post-process the zip files and release_metadata to adjust the extension

Add hudson console log to BIT reports

Added default property file for RCL_3 builds

Removed some S^2 specific code

Minor change to sf.spec.publish.release.zips.

Adding provision of publishing release zips to 'Candidates' location.

Added tag PDK_3.0.2 for changeset 468b74292f68

Added tag PDK_2.0.3 for changeset 85e3fec18491

Remove duplicate analysis-ant call

Store error output from 'hg id' to help diagnose why it's failing at the moment.

Change "localDev" caching prefix from //v800008/Builds01 to //v800020

Changing sf.spec.baseline.location to 3.0.2

Make depends analysis tool conditional

Change v800008 UNC paths into equivalent v800020 UNC paths

Add dependency analysis tool, however dont switch on yet until v2.x of depends.exe tool is deployed.

Remove erroneous copy for system model

update baseline for symbian^4 tip_pbc builds to build950

Explicitly build tools2 in qtmobility, to get the header file generation etc.

Corrected the path option to joinsysdef.pl.

Add unknown to failures uploaded to bit

Updated script for symbian 4 system model.

Dont fail build in event that System Model copy fails.

Bug 3679 Moved the copy statement of canonical_system_definition_${sf.spec.sysdef.configurations.list}.xml from generate-layers to sf-zip-logs as generate-layers is not used any longer.

Upload of build info to bit db should be controlled by sf.spec.publish.enable

Add brag determination in a separate hlm call

Create RCL_1 branch, for work on releasing PDK 2.0.3 Rest of FBF seems to have moved on too far for S^2 to keep working :-( Still, that's what branches are for.

Backed out changeset: 3698c6929ff1 That update to the FBF has had some knock on effects fopr the smoke testing use-case. Restore old version of code until it can be revisited.

Introduced new helium properties (sf.spec.test.image.location and sf.spec.test.image.name)

Changed result file name in Phonebook test plan

Account for total number of releasables when translating uh to brag and to Diamonds

Merge

Merge

Allow for a layer called "adapt" as an alternative to "adaptation"

Updated Speed Dial test to use TestFramework.ini

Added new version of ConnSet BC tests

Merge He 9 Fix

Run Speed Dial tests with engineini option

Moved Connpref to ipconnmgmt

Updated BaseSVS and WebSrv BC tests

updated baseline for tip_pbc builds to symbian4_FCL.single.821

Merge He 9 Fix

Added BC tests for SMS Utilities and Extended Connection Pref

Added Device Type (Winscw) for metadatasrv and cenreponotifyhandler test plans

Separated CenRepNotifyHandler from SystemSW test suite

Merge He 9 Fix

Added central_repository_notification_handler to SystemSW BC test suite

Merge He 9 Fix

Implemented downloading result files in XML Extensions BC test suite

Merge He 9 Fix

Added BC tests for Location Triggering, Metadata Services and XML Extensions

Added BC tests for StdLibs, Calendar and Notepad

Merge Helium 9 fix

Add default props file for tip_bulk - copy of tip_pbc

Update baselinefor symbian4 tip_pbc package builds.

Added Shortlink Services BC test suite

Uncomment push to update package models automatically

Add default props file for tip_bulk_s3

Add package model generation for tip_bulk_s3

change baseline for symbian^4 package builds back to symbian4_FCL.single.725 as 812 is winscw only :(

Upadate baseline for symbian^4 package builds to use symbian4_FCL.single.814

Added XML Services BC test suite

merge fix for Helium 9

Fix error: there is no stagelogging datatype matching for stage 'compilation'

Fix default value in build.xml when parsing sf.spec.sbs.tools.config.

Modified hlm_prep_package to accept sources.csv file as parameter

Implemented package tests

Merge templates for Tests Guidelines (http://developer.symbian.org/wiki/index.php/Guidelines_for_Package_Test_Organisation) created by TWG.

Improved diagnostic output: when the build fails because a package cannot be cloned into the build drive, it says which package and the repo source and destination. Improved caching logic, so that it doesn't depend on network availability as much. Improved indentation.

Made the generation of the syncing scripts more regular, and ensured that it all works and makes sense even when sf.spec.sourcesync.enable is false.

Updated PDK baseline for S^3 platform builds to newly released PDK_3.0.1

Added tag PDK_3.0.1 for changeset 70d88996e8cd

Sorted steps into targets, so it's easier to interpret the console output.

Made better use of fmpp constructs when filtering units and specfifying default options. Removed '/'s that don't belong in the output.

Regularised whitespace.

Some tweaks to calculating the image path

Change IMAGE_PATH to IMAGE

Update package_definition.xml generation for tip_pbc

Add Symbian^4 tip_pbc baseline

Enable MiniGUI stripped ROM building for ARMv5 builds

Further tweak to zipping the files related to the features database - ensure there's no duplication between sdk header files and tools files.

Update package_definition.xml generation for tip_pbc

Add Symbian^4 tip_pbc baseline

Enable MiniGUI stripped ROM building for ARMv5 builds

Further tweak to zipping the files related to the features database - ensure there's no duplication between sdk header files and tools files.

Added j and k switches to smoketest build

Moved further feature database artifacts from binaries zip to tools zip. This should be enough to ensure that a platform build that uses a tools baseline includes the necessary feature database files.

merge revision 1154 to add templates for tests to tip.

Remove explicit use of configure.py option --qmake-bin, using qmake.exe from the PATH instead

Bug 3266 - Problems with sf/mw/hb/configure.py are only recorded in the Hudson console log

Move build start time writing to sf-prebuild-announce

Add reports and brag info to BIT db

Fix: bitops.pl reports an error if failure count is zero

Add uh parser info to BIT db

Merge

Update *_compile.log location to output to build.log.dir

Generate diamonds-status.xml so that newer Helium versions set it as BRAG status.

Push baseline info to BIT db

Enable new attribute 'baseline' for new 'baselines' table

Add dryrun option to bitops.pl

Add DBD-mysql module (needed by bitops.pl)

Add BOM info to the BIT db

Fix: sf-diamondize-bom target is run twice

Add label info to BIT db

Removed definitions of sf-s60-compile, as there are no longer any users of the target.

Removed code which redundantly checks values of sf.spec.splitbuild, sf.spec.os.skipbuild, and sf.spec.s60.skipbuild. Removed setting of sf.spec.sysdef.version, as nothing ever reads its value. Removed sf-check-missing-s60-files, as there's nothing to call it any more.

Update build directory scrubber to try to deal with failure to delete one of the files if invoked immediately after building.

Add label info to BIT db

Attrib erroronmissingdir is supported for Ant 1.8 only, so workaround by creating dir in advance.

Dont fail if output/zips/ dir is not present (as a side effect of turning off packaging).

Turn off source packaging (to save time), as package build artefacts are removed at end of package build anyway.

Fix: envinfo in bit database is reversed

Fix: DBD-mysql is missing

Fix: compilation errors in envinfo2diamonds.pl

Fix: there are no tabs between attributes and values in bitinfo.txt

Fix: there are no newlines between avp in bitinfo.txt

Add bitops.pl. Dump start info and envinfo to bitinfo.txt

The file checks against newer versions of Perl (5.10.*), Python (2.5 or 2.6) and Raptor (2.12 or 2.14).

Merge

Updated hlm_prep_package to replace e: with c: drive in pkg files

Add templates files for the Guidelines for package test organisation.

Added tag PDK_3.0.0 for changeset 14c8058c3fa1

Improved hg tagging automation to deal with the unfortunate situation of a package overwriting it's own source files during the build.

Updated rev to 3.0.0

Added comments in hlm_prep_package script

Merge

Needed to look in the qt subdirectory of the smoketest for the conf file

Replace the qt.conf for the duration of the building of the tests

Use package definition NOT bld.inf

Shifted to correct directory for building with package definition

Modified run-qmake template to make it work in the context of smoketest exec

Smoketest source path wrong in build.test.xml

Try different approach to qmake

Added call to run-qmake to build.test.xml

Replaced hlm_fix_pkg_files with hlm_prep_package to automatically update .ini files

Merge

Needed to look in the qt subdirectory of the smoketest for the conf file

Merge

Replace the qt.conf for the duration of the building of the tests

Use package definition NOT bld.inf

Shifted to correct directory for building with package definition

Merge

Modified run-qmake template to make it work in the context of smoketest exec

Smoketest source path wrong in build.test.xml

Try different approach to qmake

Added call to run-qmake to build.test.xml

Configure preparation stage correctly

Configure stages correctly for prep, compile and postbuild.

Needed to look in the qt subdirectory of the smoketest for the conf file

Merge

Replace the qt.conf for the duration of the building of the tests

Use package definition NOT bld.inf

Shifted to correct directory for building with package definition

Merge

Modified run-qmake template to make it work in the context of smoketest exec

Added script for fixing pkg files so that they can be used by Helium test drop generator

Modified update_brag_status to automatically add link to manual Smoketest report

Fix rnd packaging and deployment

Add bldmefirst export for s60_sbs_config.xml to allow use of custom sbs targets

Remove prebuilt FBF documentation, which will now be hosted on developer.symbian.org

Populate empty service attribute in generated release_metadata.xml - as preparation-getenv target expects it.

Only load public properties if available, and restore generate-layers override to maintain Helium 5 compatibility.

Fix location of brag.xsl and point to correct top level summary

Add -k(eepgoing) option to tools manifest generation to help overcome missing bld.inf files

Only use sources_rnd.csv if its available

Output all generated makefiles into compile subdir - to cleanup number of generated files in output\logs

Transform and echo BRAG value to console

Merge

Build Qmake only if Qt package is being built

Use prebuilt baseline rather than emu for package and platform builds

Remove redundant toolsbaseline functionality

Merge

Ensure "prebuilt" binaries are classified as such. Also populate details about the release, such as build.version.

Fix toolsbaseline build logic

Major rework to enable rebuilds of the platform from single sf-build call - Change the way that sources and system model are selected: now property based - Split sources.csv to have publicly available http repos only; internal repos are in sources_rnd.csv - System model output in BOM renamed to system_model.xml rather than canonical_system_definition_{config}.xml to make reuse predictable - Public property configuration public_override_props.ant.xml now used. - Fix all exports to run based upon configuration specified (no export configuration makes SBS assume RVCT is being used, which is not available to all) - sf.production.build MUST be defined and TRUE to enable production build properties, public config is DEFAULT behaviour

Smoketest source path wrong in build.test.xml

Try different approach to qmake

Added call to run-qmake to build.test.xml

Added auto-startup of ATS4 Engine

Modified ATS4 Agent startup method

Added exporting links to Diamonds for ATS4 Smoketest report

Modified ATS4 Engine startup command

Changed method of starting ATS4 components

Modified ats_specialise_test_drop to update FlashTask with the ROM image location

Modified update_brag_status to handle ATS4 reports

Increased 'sleep' after starting ATS4 components

Added automatic start-up of the ATS4 Agent(s) and Engine components.

Replaced ats3_testdrop with ats_testdrop to handle sending test drops to ATS4 server

Catchup merge

Modified ats_specialise_test_drop to handle ats4 test plans

Correct handling of tag name and changeset author in sf-tag-hg-code Addition of sf-push-hg-tags and associated template file, for pushing the tags created in sf-tag-hg-code back out to the MCL. Minor whitespace rationalisation.

Added specification of changeset author when committing. Removed execution of hg out - that's taken care of in the push tags target/template.

Fix: package build fail because there is no package_definitions dir

Introduced new Helium property (sf.spec.ats.version) to specify ATS version

Changed locations of package_definitions to make the files a little bit more usable

Added call to produce package definition peices from system definition(s).

Enabled tool to create arbitrarily deep paths for output

Added a few strategically placed spaces, to improve the indentation of the output.

Merge in tools for manipulating sytem defintions from their own repo.

Move files into a directory appropriate for merging into main config repo.

updated commit message as no longer triggered by change in packages repo

Separate the generation of the system model and the generation of the derived package definition into 2 script so can be run separately

change destination directory for auto generated model to sydefs\auto

Fix all symbian3 package_definition have disappeared from packages

Fix: update back to HighFidelityModel is not possible because there are changed files and it crosses branches

Exec hg add/addremove commands before hg diff

Auto generate system model into codeline/single/sysdef instead of auto directory. Minor fixes

Fix some issues

Add auto update of package models also for CompilerCompatibility builds

Add automatic update of package models to the packages repository (default branch)

Add README.txt file with instructions

Use MCL for packages repo

Use MCL for the platforms repo

Uncomment pushing to web

Add generate_system_models.pl

Fix: wrong name for diamonds_envinfo file

Add tool envinfo2diamonds.pl

Use new tools to publish and compare environment information

Remove hard-coded dependency to lib.path

Take envinfo.pl from the utilities repo

Pick correct truclean.pl from the myriad of available ones

Fix location of truclean script

Update run-qmake template to add make install step to configure Orbit

Reverse order of Diamonds summary info

Fix: Diamonds summary build info should be more related to the raptor build breakdown from the UH parser

Add sgimagelite_support to Orbit

Run qmake after exports too, to allow -configure options to be applied

Change Qt qmake order to allow -config qmake args to be passed correctly

Updated template for tagging source code so it uses the TAGS branch.

Tweaked so that all revs are cloned from the utilities web repo, but it's still synced to the head of the default branch.

Fix: build fails if any source URL doesn't contain '/MCL/'

Fix: when sf.spec.sources.revision is defined sources are not updated to it

Add new property sf.spec.sources.revision to override revisions of source repos

Include explicit export log in tsv file creation

Added script for updating BRAG status with test results

Added template for manual smoketest results

Updated brag stylesheet to handle smoketest criteria

Resolve packaging oddity with missing build.drive fwdslash

Fix property typo and add sf-package-tools dependency on sf-merge-manifest

Add re-packaging for prebuilt binaries into the PDK, driven from a manifest_* file delivered with the prebuilt zip file

Merge

Make manifest generation more accurate, based upon filtered WHAT output

Change PDK baseline for symbian3 and CompilerCompatibility builds to PDK 3.0.i

Bug 2670: binaries_epoc.zip contains megabytes of useless Emulator files Exclude files in \epoc32\data\media from release zip.

Added tag PDK_3.0.i for changeset 8ee0b12c2384

Merge

Merge s^4 and ats changes.

Merge ats_specialise_test_drop modification to automatically set the test-target param.

Merge ats_specialise_drop to insert ROM image parameters.

Add explicit qtextensions configuration step

Correct location of Qt deviceconfiguration

Build qmake in .ftl, prior to running on all .pro files

Run qmake on Qt package before Orbit

Add sf-do-compile depends on create-canonical-sysdef-file

Simplify compilation by requiring a prebuilt qmake, which will generate bld.infs first.

Merge

Update run-qmake template to run Orbit configure.py first, followed by mkspec export. This should allow hb SYSTEMINCLUDEs for subsequently processed .pro files.

Use config list in run-qmake

Improve guard by checking for qmake.exe rather than qmake.bat

Ensure inheritRefs is set to true

1. Run exports post-qmake to ensure exports from generated bld.infs 2. Explicitly run qmake to save duplicate calls for iterative builds

Include prebuilt features.dat in tools_epoc.zip, as its built via tools2

Correct path separators

Repackage a generated manifest with binary zip output

list contents of zip file

buildinfo.txt now zipped up in tools_epoc.zip to make it more available for those wishing to build the platform.

Rationalised indentation

Fixed launching of ATS3, for all servers.

Modified ats_specialise_test_drop to automatically set test-target param based on device alias

Merge

Moving call to sf-package-tools outside the /parallel tag

Adding property sf.spec.prebuilt.excludelist in platform_props.ant.xml

Modifying sf-package-binary target to exclude the overlay contents from packaging

Merge

Increased Boot Time for Syborg target to 500 secs

Told perl where to look for libraries, so that Text::CSV can be located even when the script is in utilities, and the module is in an fbf repo.

Changed value of test-target property to Syborg_tef

Merge

Improve exclusion list generation for tools build

Fixed: exec doesn't support the nested "if" element

Introduced new property for passing ROM image path to ats_specialise_test_drop

Fixed ats_specialise_drop to insert ROM image parameters

Whoops - no closing tag for if in sf-start-ats.

Fixed ats_specialise_drop to insert ROM image parameters

Merge

Added ROM image parameters to ats_specialise_drop

Merge

Run start.cmd only if it exists

Added deletion of existing syborg.dtb file from ATS temp dir

Added commands to invoke new release note generator.

Added conditional statement for copying syborg.dtb file

Added copying syborg.dtb to ATS Worker Root directory

Updated comms settings for Syborg on C100782

Added new device registration files for Syborg on C100782

Introduced new property (sf.spec.test.target) for running tests on different targets

Update qmake template to run Orbit's configure.py tool

Enable qmake for all packages that have proFile attributes

Retry "module" for ant scripts, initially used by source syncing operations.

Update csvToSysDef.pl to understand proFile and qmakeArgs attributes

Prevent qmake from being run before it is built

Adding back in the spawn attribute, because sf-start-ats is hanging

Simplified the sf-start-ats target to see if it works better

Prevent qmake from failing build by suppressing 'signalRunQMakeInput' signal

Use qt.qmake.ant.template property for custom qmake template

Merged changes from MCL

Added property files for devices on c100782 test machine.

Shift down BRAG colour attribution also for Diamonds

Backout start-ats logging as its not supported when spawn=true

Update packaging to deliver output into epoc32\ location

Add logging for sf-start-ats target

Add new sf-tools build type for use with tools projects

Shift down BRAG colour attribution (i.e. critical now make the build only red, major or unknown only amber)

Add number of missing files to major failures count

Fix canonical_system_definition.xml doesn't have XML special characters escaped

Changed packaging so that /epoc/gcc_mingw/** is put into tools_epoc.zip

Adding sf-merge-brag target

FIxed package config script to be able to handle utilities repo being at old URL, or new URL.

Merge

Add new sf-build-roms target to invoke iMaker rom building

Bug 2274 - Detection of physical drives doesn't work on Vista/Win7

Updated to deal with utilities repo moving to a new URL.

Removed Helium Version Check from BuildEnv.xml to avoid CheckBuildEnv.pl problems

Re-apply changes to allow sources.csv to specify a revision by a *local* tag in the web repository. Uses "hg id" instead of "hg in", so not affected by the aborts we had previously. And no need for an empty repo this time either.

uh2brag.pl to take account of new 'missing' column in index.html

Change URL to utilities repo

Back out emptyRepo changes - due to issues

Merge

Remove call to releaseables.pl script as now UH parser handles releaseables as well

Wrote a script to extract data for e32tests & f32tests based on input from: richardcoles / Symbian Foundation Community Member and Krishna Achugatla from Symbian.

Added -n flag (newest first) to invocation of hg in, so that it gives us the most tip-ward revision that would be needed, not the oldest (revision 0 in almost all cases).

Extended source syncing slightly, to be able to manage use of local tags on (web) server.

Update pckg_test_status_patterns.csv with more info to look for tests patterns.

Remove call to releaseables.pl script as now UH parser handles releaseables as well

Wrote a script to extract data for e32tests & f32tests based on input from: richardcoles / Symbian Foundation Community Member and Krishna Achugatla from Symbian.

Include -j option for sf-do-full-export target

1) Add support for parallel makefile generation by spliting compile into two-step operation. export first, followed by compile. 2) Remove smoketest from sources.csv and into sources_test.csv. This enables a fully resolved csv file to be fed directly back into a platform build.

Merge

Include armv5 bootloader binaries into lib zipfile.

Updated version checker to permit all versions of hg from v1.2 to v1.5

Moved bc_filter tool to utilities repo.

Changes from v800008

Adjusted invocation of ConE so it doesn't completely fail if /epoc32/rom/config/ does not exist. Should get the CI build running again.

Regularised indentation

Fix java version is not available

Update baseline for CompilerCompatibility builds

Update baseline for symbian3 builds

Added ATS property files for v800004

Turn off zipContentMacro failure for empty zip targets in Helium 7

Relocated Helium 7 *.log.dir property settings from root build.xml to common\build.xml so that 'sf.spec.job.drive' works again.

build_md5.zip now in release_metadata.xml

findphysicaldrive.pl - Fixed so it works with empty (freshly formatted) drives.

Catchup merge

Catchup merge

catchup merge.

Packaging tools with the binaries.

Catchup of Shabe's Helium7 work.

Added tag PDK_3.0.h for changeset ebd555518364

Move copying of System Model to after compile-main

Export system model to BOM directory. This used to be done by generate-layers, however this isnt called by compile-main anymore.

Merge

Fix scan_antlogs.pl execution plus fix ConE calls to use PDT_HOME env variable

Add initial support for Helium7 for the platform. * Use sf.spec.sbs.options to pass args direct to Raptor. * Backwards compatibility with Helium5 maintained. * Listdir function to be provided by sbs check filter, which will be added later.

quick fix for zipping winscw lib files. Added property 'sf.spec.package.zip.format' for the post-build zip format (default is '7z').

Changes to zipping during platform build; binary files are divided into 4 more zips, reducing individual sizes.

Added tool for filtering BC header reports

sourcesync template - Updated generation of 'changes.txt' so that it does a 'follow' rather than being restricted to a 'branch'. This enables us to see the history if the previous tag was an ancestor but on a different branch.

Corrected property name for activating the hg cache, so it should take effect!

Remove Raptor log preprocessing as no longer needed

Take the UH parser from the utilities repo

Add Helium and java to the enironment info

Update baseline for symbian3 and CC. Remove symbian2 property file as we are no loger building for symbian2

s/bishare/v800020/

Reviewed rules defining the BRAG status

Merge

Merge

Add Helium 7 support for package builds. - During operation, if last.major.helium.version is detected as 7.0 then it will use new sbsinput mechanism. - Restore sf-postbuild dependency on sf-build-noprep target

Added error correction, so if a cache repository is corrupted in some way, then it will by-pass it, and try to recover it, or delete it.

Moved definition of dollar, so it's available for use when needed.

Stopped cache being located/created in a stupid place, relative to the CWD on the cache drive. Work around limitation of ant-contrib regular expressions, so they're not thwarted by \s in the cache location property.

Add missing / Avoids potential problem of it not seeing an existing cache, depending on the CWD on the cache drive at the point the target is running (which could be anything really).

Turned on use of cache for all platform builds (unless over-ridden by the particular job properties of course).

Bug 1661: Simplified the sequence of pulls/clones via the cache, so the changes simply go from source -> cache -> destination. Made use of --uncompressed flag to speed things up. Including setting the flag when we create a cache entry.

Bug 1661: Improve build speed with better caching strategy Changed the way that the cache is located, so the same code can run on any build machine without any configuration. Made work around for Bug 419 the only option, as we're not using the alternative anyway, and I don't want to commit completely untested code! Changed caching algorithm, to improve build times.

Updated capabilities of findPhysicalDrive to support imminent work on locating the hg cache.

Indentation and other minor changes to make the file easier to read and understand.

Added profiling timer to sf-get-source target.

Fix version of new mwccsym2 is reported as N.A.

Added tag PDK_3.0.g for changeset fc600bbaa15c

Fix BRAG status is different as viewed from Diamonds and from the _BRAG.xml page

Update baseline for symbian3 and CompilerCompatibility builds. Removed unused property file for NewGraphicsArchitecture

Dump environment info to Diamonds

Fix when accessing uh index from brag summary, pages linked from uh index are not found

Make BRAG point to the results of UH parser instead of intermediate artifacts

Remove redundant computation of some BRAG intermediate xml files

Commented out log-to-brag call on build environment checker as its results shouldn't be brag affecting

Make index.html report on all packages, including the ones built successfully. Make the list of packages be alphabetically sorted

Enabled filtering results after Static BC analysis

Added tag PDK_3.0.f for changeset ef25bf39d67c

Creation of TAGS branch. The TAGS branch should be used for *all* tags, including PDK release tags and package release tags. Do not merge this branch with any "code" branches.

Merge

Remove check-tool-dependencies to allow > Perl 5.6.1

Disabled filtering results after Static BC analysis

adding EPL headers to smoke test

sf-run-analysis-missing-files - changed to depend on a new undefined parameter 'sf.spec.checkbuild' so that it can be turned on and off

sf-s60-cone-cenrep - S60 config with epoc32/data/z combintation was missing.

Add ConE or ConfigurationTool support. ConfigurationTool is used for Symbian2 only.

Updated to ignore messages of the form "Nothing to be done for ..." as these do not represent a problem of any kind at all.

Removed copying smoketest source to EPOCROOT from sf-build-smoketestpkg target

Changed the way that the sf.spec.sourcesync.enable property is used to control the syncing, so that it can sync test repos even if it's not syncing any source repos.

Move targets round so that those related to syncing the source are all together.

Intelligent way of getting timings for ALL uses of sf-zip-content

Removed changes in build.test.xml to copy smoketest source to EPOCROOT

Removed copying smoketest source to EPOCROOT

Added stopwatch tasks through most of the code hit during a platform build.

Added sf-scrub-build, for completely freeing up the resources used by a build (ie deleting it from the HD). Removed import of generated ant script as it had no effect, and was causing strange failures with sf-scrub-build.

Removed check for value of PDT_HOME, as it doesn't matter where it's installed, and it's turning the CI builds red.

Code to automatically find a physical drive for running a build, triggered as necessary.

Added new logic to deal with drive letter allocation when builds are launched from Hudson.

Added framework for specifying a "sources.csv" for test repos (separate from both the FBF and the sources repos).

Catchup merge

Fixed websrv bc test suite. Increased time-outs for selected bc tests.

updated version of sysdefdowngrade.xsl from BobR

add xsl for merging / downgrading system model

Added smoke test for Media management

Fixed ats_generate_index.pl to not include the link to Smoke Test Report

Disabled BC check for Platform builds

Fixed creation of the ats_reports folder

Fixed copying temp index

Implemented publishing Dynamic BC Test Reports

Added new property for publishing Smoke Test Report

Added tool for generating the top-level index for BC test reports

Add escape left angle bracket to preprocessing of raptor log (see bug #1519)

PDK baseline for symbian3 builds back to PDK_3.0.d as PDK_3.0.e is not stable yet

ArnaudL: corrected last entry that had "????" left behind.

Arnaudl: Added scripts and files related to the development of "task 286 - Package test status prep"

Added tag PDK_3.0.e for changeset a1ebf7f8e66f

Move gcc into tools_epoc.zip so that syborg/beagle rom building works during build from source only.

Added new param for calling ats_specialise_test_drop.pl from build.test.xml

Added smoke test for making a connection to a web server through ethernet

Update the PDK baseline for symbian3 builds

Fixed smoke test for Localisation

Added smoke test for Graphics

Added tag PDK_3.0.d for changeset b9c988316957

Added tag PDK_2.0.2 for changeset 2a9e6403efaf

Platform Build - Added 'sf-postbuild' onto deps for 'sf-build-noprep' as although it isn't the best place to have it, it's the same as the deps for the version in 'common' and is needed for the external Hudson jobs.

Ensured build environment is always compared with expected environment, whether or not it would abort the build because of it.

Changed building of tools targets so that it builds the targets listed in ${sf.spec.sbs.tools.config}, in sequence, rather than just buildng tools2_rel.whatlog followed by tools_rel.whatlog, regardless of the property.

Moved hlm:argSet definitions in sf-os-compile to be adjacent to the call that uses them. (And deleted three unused ones in the process.)

Update the PDK baseline for symbian2 builds

Updates to make the build environment check more reasonable: Mercurial v1.3 permitted The Java compiler is not a showstopping issue 7-zip can be installed in any location Update to Helium 5 Helium can be installed in PDT 1.*, not necessarily 1.0 Raptor installation path not significant Update to Raptor 2.9.* The Raptor patch to update the bundled version of python is no longer relevant BRAG calculations updated to ignore items not being in the system path, as this just doesn't matter. Overall effect is that the build environment check should pass on a machine that is able to do a build!

Regularised indentation

Fixed postAction in ats_specialise_test_drop.pl

Implemented FileStoreAction for BC tests

Implemented exporting Smoke Test Report to Diamonds

Updated postbuild to publish smoketest results

Updated ats_specialise_test_drop.pl to insert FileStoreAction param

Added new postAction to smoketest.xml

Restored signifcance of the MS tools not being available, as this only occurs when running a configuration that would try to use them.

Re-indented target "sf-os-compile" (following best guess as to the standard) to make it easier to read.

Re-assessed some of the raptor error messages to reflect the inconsequential nature of missing the MS dev tools when not trying to build the tools target.

Changed mergeXML.pl to use a better version of the XML printing algorithm, so it can generate well-formed content if the input includes some rogue &s or <>s.

If any files are in both the list of SDK headers, and the list of RnD headers, then they're only zipped in the binaries_epoc_additional zip, and not the binaries_epoc_sdk zip.

Fixed format checking of summary.csv to deal with new field.

Test: Add MediaMgmt smoke tests (not being built or run ATM)

Test: Remove the media management smoke test for now

Re-instated call to process raptor logs for BRAG purposes.

Remove s60 postfix from sf-s60-create-cenrep for Symbian^3

Fixed format checking of summary file so that it actually checks something!

Updated framework for packaging SDK headers so the contents to zip can be set by a project property (or it can zip everything together if it's not set).

add media mgmt to smoketest build

Fix cenrep export location

SDK file list - Fixed duplicates

Fixed and enabled smoke test for Set Language

Defined new devices for v800017

Disabled smoke test for Set language

Small changes to make the output file more regular, and therefor easier to read and understand.

Added processing of error tags.

Fixed perl scripts for building BC test drops

Fixed Set language smoke test

Changed to package the SDK header files in a different zip to the rest of the epoc32 tree.

Fixed smoketest.xml

Added new smoke test for phone languages

Removed code for building ROMs (now done by Raptor) but added code for publishing ROM building logs.

Fix releaseables are missing. Fix stray call to summarize.pl

Catchup merge

Disabled BC check from running as default on builds. Should be enabled specifically at the command line.

Added new smoke test for Setting wallpaper

Disabled bccheck for normal builds

Catchup merge

Platform Build cenrep generatation - modified 'sf-s60-create-cenrep' to hopefully cope with the different CRML export paths coming from the different platform_paths.hrh. This isn't pretty.

Fix Diamonds links are no longer appearing

Added conditions for BC check results to be published

Changed delays between key presses

Added smoke test to close UI setup dialogs

Increased delay before presskey

Enabled bccheck for normal builds

Update send_xml_to_diamonds.py and update invoking code to match new i/f

Updated IF statements for BC reports

Add new recipe-error categories armcc_modifier_not_allowed, mwccsym2_file_cannot_be_opened

Changed current baseline version for BC check.

Fix freemarker.core.ParseException: Encountered { at line 25, column 15 in linksForDiamonds.xml.ftl

Added Static BC reports for Platform Builds

Add NewGraphicsArchitecture_props.ant.xml

Update PDK baselines for package builds

Merge Tags

Add Raptor Build Summary to the links for Diamonds

Publish HTML files summary of Raptor build

Now creates src-by-layer entries on the fly, so it doesn't create release zips with no content.

Added interpretation of recipe "win32def2lib" failing.

Fix XML-SAX bug #43174 (see http://rt.cpan.org/Public/Bug/Display.html?id=43174)

Improved Raptor parser, now "uh"

Changed versions of the baselines for Static BC test

Disabled Dynamic BC tests

Merge

Added tag PDK_2.0.1 for changeset e13acd883fbe

merged heads - non trivial merge in smoketest. Manual merge of those changes.

Test: Input methods smoke tests added.

Test: Fixed up the app install smoke tests so that both now pass

Added new smoketest

Add call to parse (preprocessed) raptor logs directly for BRAGG.

Updated XSL to include counts of failures at each severity, and also the new effect/causes distinction, for failures that are not package specific.

New script which parses raptor logs directly to produce a BRAG summary. New version of XML structure accommodates causes of failure as well as the effect of the failure, and deals with excessive error messages. New structure also avoids a potential problem (bug?, questionable feature?) that both IE and firefox exhibit. Some simplifications of brag utilities module.

Moved common code to shared module.

Updated the options to pass to getenv, to include -k. This avoids aborts if things are not exactly as the tool expects.

Added tag PDK_3.0.c for changeset 12815724a053

Added new smoketest

Added new smoketest

Bug 881: Now also provides the locations of the two split-build system definitions to the release note generator, so it will work with both single and split builds.

source sync template - enabled getting the mercurial changes if you have sf.spec.sourcesync.archive set

Transplant fix in ats BC Test - 'bld_sis' change that was knocked out with the rest of the transplant (bcdrivers/utilities)

Added call to munge license headers at the top of the postbuild phase, so it should be done within the platorm build.

Switched to using revised Package/FCL analysis script.

Remove meta data from package definition and replace with helium script

Test: Forgot to execute Profile smoke tests

Test: Changes to test drop files to run AppInstall

Test: Tweaked Profile tests and added AppInstall

Add new raptor-analysis recipe-failure category: elf2e32_symbol_missing_from_elf_file

Override Helium defaults for RVCT checks to allow winscw builds without RVCT

Update PDK baselines for package builds

Add CompilerCompatibility properties file for package build

Changed device name for lon-engbuild89

Changed device name for lon-engbuild87

Changed device name for C100725

Changed device name

host name is added for any number of devices

Added smoketest for Notepad

Add recipe-failure category armcc_internal_fault

fix bug with multiple harnesses

export to 'smoketest' instead of 'testframework'

capitals

updated smoketest plan to support both harnesses

Add recipe-failure categories armcc_controlling_expression_is_constant and armcc_generic_warnings_errors

Adding profiles smoke tests

Removed unnecessary dependencies, to untangle the dependency graph a little.

In raptor-analysis create summary.csv file anyway, otherwise some targets following may crash the build

Added smoketest for email

Update to add all components and create zip file for PDT

Add all components to bc test suite build

Fix some build configurations are left as 'noconfig'

Add raptor recipe error category armar_file_does_not_exist

Add raptor error categories unknown_build_config and no_build_configs_given

Merging tag

Added tag PDK_3.0.b for changeset cdfb88270be0

Let sbs targets be taken from sf.spec.sbs.config

Added 3 new smoke tests

Changed dst path for evptests.txt

Add missing components to the BC build script

Added new device for LON-ENGBUILD89

Added new device for LON-ENGBUILD87

catchup merge.

catchup merge

source sync template - Changed the BOM changes targets to limit the listed changes to the branch if the source was synced up using a branch, to make it easier to read.

Added Core Telephony BC tests

Added all of the tests for ASP

If makefile_template copy fails then ignore, as its no longer needed for S^3.

Merge

Add sf-rombuild target to build ROMs. Backout ARM license check suppression.

Change baseline for symbian3 to \\bishare\releases\PDK_3.0.a

Fix only one raptor log gets processed by Dario's Raptor parser

Send to Diamonds only 3 links: brag, build bom, build logs

Change default location of build results/reports to \\v800020\Publish\SF_builds

Make script stop execution after help is displayed if --help

Remove default "test" tag

Catchup merge of tags

Added tag PDK_2.0.0 for changeset 7a343c038e7d

Added tag PDK_3.0.a for changeset 4709730d5226

Added new BC test

Added new BC test

catchup merge.

catchup merge.

sf-run-evalid - minor change to make sure that evalid is run at the root of the build drive, which can stop the MD5s from being generated. (evalid requires dirs to be relative and not absolute)

added a missing testdata file

Added new BC test

Updated throughout to use the "temp_build_files" dir on the build drive rather than the "generated" directory in the fbf source tree.

Moved the generation of the release metadata entry for the MD5 zip outside of the parallel section, so it can't co-incide with the zipping of the binaries. Ensured that any errors generated when merging log files are not just hidden by putting them in the output file (which will render it not well-formed XML).

Replaced <available> check with an <uptodate> check, to greatly help people working on the FBF who want the file automatically regenerated according to the changes they have made.

Restored call to summarise final BRAG status for regular platform builds.

Major packaging change to work around parallel calls - stopped zipping targets from having direct dependency on 'sf-preprocess-package-config', and instead have 'sf-zip-content' call 'sf-preprocess-package-config' if needed. Changed 'sf-prep' to call a target that wipes out the 'generated' directory. It's not perfect but it gets us going again.

Moved invocation of sf-brag-to-diamonds, so it's right at the end of the postbuild (apart from publishing zipped logs). This avoids the possibility of a build abort when parallel threaqds are trying to a) convert a log file into a brag file, and b) merge all brag files ready to determine the brag status. It also makes more sense - don't calculate or send the BRAGG status until the build is on the cusp of completion.

Merge

Add standard C++ tests to the build

Changed timeout

Added new BC test

Added new BC test

Bug 479: RnD package zips contain content not releaseable to public Updated packaging tools to separate binaries and source in RnD repos.

tried changing the directory for pbkaddressselect.rsc

Added new BC test

Merge

Add missing components to build

Add use lib statement to look for Text-CSV in local lib folder

Bug 478: build_*.zip missing from generated release_metadata.xml Added call to zip system to add entries for these zips to the release_metadata.xml

Updated comments in perl scripts

Added new BC test

fixed up the phonebook tests to run faster

Replaced section "Package failures by phase/step/severity" with "Package failures by package/severity" Added internal links from the package/severity breakdown to the peices of the new section.

Merge

Make csvToSysDef.pl work with codelines different than 3k

Updated comments

Move QEMU into adaptation layer when packaged

ATS fix for getting the smoketest to run.

Added lib dir to pick up Text::CSV when it's not included with the installed perl distribution.

Add new BC test

Added lists of error messages themselves, categorised by phase, step, ...

Added tables for eack package with failures, broken down by severity. Added anchor links to new tables from table of packages.

Added understanding of the "ar" failure.

Added post-processing of YARP analysis to feed into BRAG status.

Added copy to copy the XSL so it's available if ever an XML is generated there.

Created a dedicated sf-log-to-brag target so it can take care of the commonality of the task, including the creation of the directory for XML output.

catchup merge.

sf-gen-buildinfo-txt target in platform build - De-CamelCasing buildinfo.txt deletion and creation to fix zip inclusion/exclusion problems.

Fixed generation of rnd excludes file, so there are the necessary new-lines.

Add new BC test

New BC test added

Device name removed

sf-brag-to-diamonds - Only copy over the Brag XML if '${sf.spec.publish.enable}' is true.

ATS target 'sf-build-smoketestpkg' - fix for argument name change in 'ats_specialise_test_drop.pl'. Update command-line help for 'ats_specialise_test_drop.pl'

catchup merge.

Modified sf-check-missing-os-files to deal with 'sf.os.compile.iterate' property. Added new target 'sf-compile-options' for setting the gmake sbs compile option, and added it as a dep for the compile targets.

Allow to copy all the files in the summary directory to the bishare to allow link for BRAG to work in Diamonds.

remove 'test.xml'

added basesvs.xml

sorted out more stuff with the dynamic bc, fewer failures now

some more updates to bc stuff

graphics test plan now only runs fbserv tests

New BC test

Set PDK baseline to PDK_3.0.a_alpha_FCL.120

Merge

Skip sf-compare-to-baseline if sf.spec.publish.enable is false. Update FBF documentation.

Make sure the BRAG xml and xsl files are sent to bishare in an unzipped way to allow access from link in Diamonds.

Make sure the BRAG xml and xsl files are sent to bishare in an unzipped way to allow access from link in Diamonds.

Make sf.spec.job.codeline the publishing category

Merge

Fix layer names for production and test builds

sf-run-analysis - Making 'sf-brag-to-diamonds' depend on 'sf.spec.publish.enable' property

catchup merge

Fixed md5 zipping in case no publish is requested. Added overwriting of variant.cfg if it already exists

catchup merge

sf-check-env - Fixed typo causing build to always halt if 'sf.suppress.buildenv.check' isn't set.

catchup merge

source-spec.ant.xml.ftl - Added change info for the BOM that lists submitted changesets between the baseline ('sf.previous.pdk.tag') and the synced changeset and writes to a changes.txt file in the BOM dir.

Added work-around for the QEMU package whilst it's still in an interim location, but we want to release it in a PDK. (The proper fix would be to move the repository into the right place and update the sources.csv, but time is of the essence!)

merge

fixed up multimedia to match fts

fixed up most of the issues with the dynamic bc test plans

sf-preprocess-package-config - fix for another BRAG step that presumes that "${build.log.dir}/summary" exists.

sf-check-env - Adding mkdir for BRAG output file.

sf-prep - Partial Revert of changeset aa36fa431e3d - 'Added processing of the BuildEnvironmentCheck for BRAG purposes.' as we need 'sf-check-env' to be optional with 'sf.suppress.buildenv.check' variable.

Keepgoing in the event of testpackage submit error.

Adjustsed BRAG to BRAGG, to accommodate the possibility of there being Green builds and Gold builds.

Adjusted capitalisation to make the final output more aesthetically pleasing.

Added processing of the BuildEnvironmentCheck for BRAG purposes.

Parse log generated during proprocessing of zip config, so it gets included in BRAG analysis.

Merge

Upload codeline and sf.spec.diamonds.tag as Diamonds tags

Add link in Diamonds to read the BAG status from _brag.xml.

Sorted out misalignment between capture of diamonds build id and its re-use.

Copy Symbian_OS.HRH to required location

Add codeline specific property files

Merge