# HG changeset patch
# User MattD <mattd@symbian.org>
# Date 1255717566 -3600
# Node ID b4b3727007b2852522d182bfeadf45de130e90d4
# Parent  6d65abb8bba1f8ab8e472f613a50be00f08bd632# Parent  98a10176d5b2d6921afc6557c2b5605e1ab047ff
catchup merge.

diff -r 6d65abb8bba1 -r b4b3727007b2 common/build.postbuild.xml
--- a/common/build.postbuild.xml	Fri Oct 16 14:57:32 2009 +0100
+++ b/common/build.postbuild.xml	Fri Oct 16 19:26:06 2009 +0100
@@ -45,7 +45,13 @@
               </then>
             </if>
         </parallel>
-        
+
+        <!-- Generate release_metadata entries for the md5 zips -->
+        <antcall target="sf-zip-content">
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
+            <param name="zip.target.name" value="bin-just-metadata" />
+        </antcall>
+ 
         <!-- Launch smoketest -->
         <if><istrue value="${sf.spec.test.sendpkg.enable}"/>
             <then>
@@ -63,6 +69,7 @@
 
         <!-- Zip up all the logs -->
         <runtarget target="sf-zip-logs"/>
+        <runtarget target="sf-brag-to-diamonds"/>
 
         <!-- Publish logs/reports -->
         <if>
@@ -77,13 +84,13 @@
     <target name="sf-tag-hg-code">
         <property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>
         <fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"
-              outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">
+              outputFile="${temp.build.dir}/tag-hg-code.ant.xml">
             <data expandProperties="yes">
                 ant: antProperties()
                 data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
             </data>
         </fmpp>
-        <ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>
+        <ant antfile="${temp.build.dir}/tag-hg-code.ant.xml"/>
     </target>
 
     <target name="sf-run-evalid" >
@@ -193,18 +200,13 @@
         <zip destfile="${build.output.dir}/zips/release/build_md5.zip">
             <zipfileset dir="${build.drive}/output/md5/" prefix="epoc32/relinfo"/>
         </zip>
-        <!-- Generate release_metadata entries for the above zips -->
-        <antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
-            <param name="zip.target.name" value="bin-just-metadata" />
-        </antcall>
     </target>    
     
     <target name="sf-package-binary" depends="sf-package-postbuild-rnd">
         <!-- Warning: Reverting to using the He zipper will also revert to a single zip for the binaries:
              would need to update the template and possibly the script that populates it -->
         <!--antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <param name="zip.target.name" value="bin" />
         </antcall-->
         <parallel>
@@ -241,14 +243,14 @@
         </parallel>
         <!-- Generate release_metadata entries for the above zips -->
         <antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <param name="zip.target.name" value="bin-just-metadata" />
         </antcall>
     </target>
 
     <target name="sf-package-postbuild-rnd" >
         <antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <param name="zip.target.name" value="rnd-postbuild" />
         </antcall>
     </target>
@@ -262,7 +264,7 @@
             <arg value="epoc32/tools"/>
         </exec>
         <antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <param name="zip.target.name" value="tools" />
         </antcall>
     </target>
@@ -517,7 +519,7 @@
 
     <target name="sf-brag-to-diamonds">
         <!-- Merge all our bits of XML together -->
-        <exec executable="perl" output="${build.log.dir}/summary/_BRAG.xml">
+        <exec executable="perl" output="${build.log.dir}/summary/_BRAG.xml" logError="true">
             <arg value="${sf.common.config.dir}/tools/mergeXML.pl"/>
             <arg value="--xsl=brag.xsl"/>
             <arg value="--merge=buildStatus,phase(name),step(name),failures(level)"/>
@@ -633,7 +635,7 @@
                     <zipfileset dir="${build.drive}/output/logs/releaseables" prefix="build_info/logs/releaseables"/>
                 </zip>
                 <antcall target="sf-zip-content">
-                    <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+                    <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
                     <param name="zip.target.name" value="info-just-metadata" />
                 </antcall>
             </then>
diff -r 6d65abb8bba1 -r b4b3727007b2 common/build.xml
--- a/common/build.xml	Fri Oct 16 14:57:32 2009 +0100
+++ b/common/build.xml	Fri Oct 16 19:26:06 2009 +0100
@@ -57,7 +57,7 @@
     <!-- setup conditional Helium internal properties -->
     <if><istrue value="${sf.spec.sourcesync.usecache}"/>
         <then>
-            <property name="sf.spec.sourcesync.sourcespecdir" value="${sf.common.config.dir}/generated"/>
+            <property name="sf.spec.sourcesync.sourcespecdir" value="${temp.build.dir}"/>
         </then>
         <else>
             <property name="sf.spec.sourcesync.sourcespecdir" value="${sf.project.location}"/>
@@ -65,14 +65,14 @@
     </if>
     
     <!-- conditional import of generated source spec if available -->
-    <if><available  file="${sf.common.config.dir}/generated/source-spec.ant.xml" />
+    <if><available  file="${temp.build.dir}/source-spec.ant.xml" />
         <then>
             <echo message="Generated source spec found, importing..." />
-            <import file="${sf.common.config.dir}/generated/source-spec.ant.xml"/>
+            <import file="${temp.build.dir}/source-spec.ant.xml"/>
         </then>
     </if>
     
-    <target name="sf-prep" depends="sf-clean-generated-directory,prep-drive,init-build-area,sf-generate-source-spec,check-tool-dependencies,create-bom,log-build-env">
+    <target name="sf-prep" depends="prep-drive,init-build-area,sf-generate-source-spec,check-tool-dependencies,create-bom,log-build-env">
         <echo>[SF-PREP]</echo>
         <!-- Test for the disk space we would like for this build -->
 	<fail>
@@ -164,12 +164,11 @@
         <if><istrue value="${sf.spec.sourcesync.usecache}"/>
             <then>
                 <echo message="Generating Hg local cache..." />
-                <mkdir dir="${sf.common.config.dir}/generated"/>
                 <exec executable="perl" dir="${build.log.dir}" failonerror="true" output="${build.log.dir}/${build.id}_hgcache.log">
                     <arg value="${sf.common.config.dir}/tools/cachefiles.pl"/>
                     <arg value="${sf.spec.sourcesync.cachelocation}"/>
                     <arg value="${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}"/>
-                    <arg value="${sf.common.config.dir}/generated/${sf.spec.sourcesync.sourcespecfile}"/>
+                    <arg value="${temp.build.dir}/${sf.spec.sourcesync.sourcespecfile}"/>
                 </exec>
             </then>
         </if>
@@ -177,10 +176,10 @@
         <!-- TODO: 1. Same file name souce-spec.ant.xml is used for all packages
         for multiple package builds, this needs to be linked with package name. -->
         <!-- TODO: 2. Change fmpp data to be a full property rather than relative path -->
-        <delete file="${sf.common.config.dir}/generated/source-spec.ant.xml"/>
+        <delete file="${temp.build.dir}/source-spec.ant.xml"/>
         
         <fmpp sourceFile="${sf.common.config.dir}/templates/source-spec.ant.xml.ftl"
-              outputFile="${sf.common.config.dir}/generated/source-spec.ant.xml">
+              outputFile="${temp.build.dir}/source-spec.ant.xml">
               <data expandProperties="yes">
                     ant: antProperties()
                     data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
@@ -394,13 +393,13 @@
       <then>
         <echo message="Executing truclean step."/>
         <fmpp sourceFile="${sf.common.config.dir}/templates/truclean.ant.xml.ftl"
-            outputFile="${sf.common.config.dir}/generated/truclean.ant.xml">
+            outputFile="${temp.build.dir}/truclean.ant.xml">
           <data expandProperties="yes">
               ant: antProperties()
               data: csv(${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
           </data>
         </fmpp>
-        <ant antfile="${sf.common.config.dir}/generated/truclean.ant.xml"/>
+        <ant antfile="${temp.build.dir}/truclean.ant.xml"/>
       </then>
       <else>
         <echo message="Skipping truclean step."/>
@@ -429,7 +428,7 @@
   </target>
     
     <target name="sf-get-source" depends="sf-generate-source-spec">
-        <ant antfile="${sf.common.config.dir}/generated/source-spec.ant.xml" />
+        <ant antfile="${temp.build.dir}/source-spec.ant.xml" />
     </target>
     
     <target name="sf-diamondize-bom" depends="sf-record-proj-conf-bom">
@@ -449,13 +448,12 @@
     </target>
 
     <target name="sf-preprocess-package-config">
-        <mkdir dir="${sf.common.config.dir}/generated"/>
 	<echo message="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>
         <exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zipconfig.log">
             <arg value="${sf.common.config.dir}/tools/populateziptemplate.pl"/>
             <arg value="${sf.spec.sourcesync.sourcespecdir}/${sf.spec.sourcesync.sourcespecfile}"/>
             <arg value="${sf.common.config.dir}/templates/zip.cfg.xml.ftl.template"/>
-            <arg value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <arg value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <arg value="${build.log.dir}/rnd_excludefile.txt"/>
         </exec>
         <antcall target="sf-log-to-brag">
@@ -466,13 +464,29 @@
         </antcall>
     </target>
     
-    <target name="sf-zip-content" >
+    <target name="sf-zip-content">
+        <!-- If it's the file we use for everything, and it's not up to date... -->
         <if>
           <and>
-            <equals arg1="${zip.config.file}" arg2="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
-            <not><available file="${zip.config.file}"/></not>
-          </and>  
+            <equals arg1="${zip.config.file}" arg2="${temp.build.dir}/zip.cfg.xml.ftl"/>
+            <not>
+              <and>
+                <uptodate targetfile="${temp.build.dir}/zip.cfg.xml.ftl">
+                  <srcfiles dir="${sf.common.config.dir}">
+                    <include name="tools/populateziptemplate.pl"/>
+                    <include name="templates/zip.cfg.xml.ftl.template"/>
+                  </srcfiles>
+                </uptodate>
+                <uptodate targetfile="${temp.build.dir}/zip.cfg.xml.ftl">
+                  <srcfiles dir="${sf.spec.sourcesync.sourcespecdir}">
+                    <include name="${sf.spec.sourcesync.sourcespecfile}"/>
+                  </srcfiles>
+                </uptodate>
+              </and>
+            </not>
+          </and>
           <then>
+            <!-- (Re)build the packaging config file -->      
             <runtarget target="sf-preprocess-package-config"/>
           </then>  
         </if>
@@ -492,11 +506,11 @@
     <target name="sf-package-source" >
         <!-- Firstly zip up rnd by package -->
         <antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <param name="zip.target.name" value="rnd" />
         </antcall>
         <antcall target="sf-zip-content">
-            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+            <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
             <param name="zip.target.name" value="rnd-internal" />
         </antcall>
         <if>
@@ -504,12 +518,12 @@
             <then>
                 <echo message="INFO Packaging Source Repos"/>
                 <antcall target="sf-zip-content">
-                    <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+                    <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
                     <param name="zip.target.name" value="src" />
                 </antcall>
                 <!-- Then zip up src zips by layer -->
                 <antcall target="sf-zip-content">
-                    <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
+                    <param name="zip.config.file" value="${temp.build.dir}/zip.cfg.xml.ftl"/>
                     <param name="zip.target.name" value="src-by-layer" />
                 </antcall>
             </then>
@@ -555,10 +569,5 @@
         <copy file="${sf.common.config.dir}/tools/brag/brag.xsl" toDir="${build.log.dir}/summary/"/>
     </target>
     
-    <target name="sf-clean-generated-directory">
-      <delete dir="${sf.common.config.dir}/generated" failonerror="false" />
-      <mkdir dir="${sf.common.config.dir}/generated" />
-    </target>
-
 </project>
 
diff -r 6d65abb8bba1 -r b4b3727007b2 common/tools/ats/bctest/stdcpp/stdcpp.pl
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/tools/ats/bctest/stdcpp/stdcpp.pl	Fri Oct 16 19:26:06 2009 +0100
@@ -0,0 +1,77 @@
+#!/usr/bin/perl
+# Copyright (c) 2009 Symbian Foundation Ltd
+# This component and the accompanying materials are made available
+# under the terms of the License "Eclipse Public License v1.0"
+# which accompanies this distribution, and is available
+# at the URL "http://www.eclipse.org/legal/epl-v10.html".
+#
+# Initial Contributors:
+# Symbian Foundation Ltd - initial contribution.
+#
+# Contributors:
+# Maciej Seroka <maciejs@symbian.org>
+#
+# Description:
+# Script to build ATS test drop for STDCPP BC tests
+
+
+use strict;
+use File::Copy;
+use File::Path;
+
+unlink "stdcpptest.zip";
+rmtree "temp";
+mkpath "temp/stdcpptest/general/testframework";
+mkpath "temp/stdcpptest/winscw_udeb";
+
+my $epoc=$ENV{'EPOCROOT'} . "epoc32/";
+copy("stdcpp.xml",	"temp/test.xml");
+
+copy($epoc . "release/winscw/udeb/bccppwrap.dll",					"temp/stdcpptest/winscw_udeb/bccppwrap.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCCSRuntimeSup.dll",				"temp/stdcpptest/winscw_udeb/BCCSRuntimeSup.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCException.dll",					"temp/stdcpptest/winscw_udeb/BCException.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCNoNamespace.dll",				"temp/stdcpptest/winscw_udeb/BCNoNamespace.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCOpenCHeaders.dll",				"temp/stdcpptest/winscw_udeb/BCOpenCHeaders.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCOpenCWrap.dll",					"temp/stdcpptest/winscw_udeb/BCOpenCWrap.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCThread.dll",					"temp/stdcpptest/winscw_udeb/BCThread.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCTypeAttrib.dll",				"temp/stdcpptest/winscw_udeb/BCTypeAttrib.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/BCTypeInfo.dll",					"temp/stdcpptest/winscw_udeb/BCTypeInfo.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/chartypes.dll",					"temp/stdcpptest/winscw_udeb/chartypes.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/tmath_operations.dll",			"temp/stdcpptest/winscw_udeb/tmath_operations.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/tmemory.dll",						"temp/stdcpptest/winscw_udeb/tmemory.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/tutility.dll",					"temp/stdcpptest/winscw_udeb/tutility.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/widecharclassapiBCTest.dll",		"temp/stdcpptest/winscw_udeb/widecharclassapiBCTest.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/tlocale.dll",						"temp/stdcpptest/winscw_udeb/tlocale.dll") or die "failed : $!";
+copy($epoc . "release/winscw/udeb/tstl_1.dll",						"temp/stdcpptest/winscw_udeb/tstl_1.dll") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_cppwrap.ini",	"temp/stdcpptest/general/testframework/testframework_cppwrap.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtruntime.ini",	"temp/stdcpptest/general/testframework/testframework_mrtruntime.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtexp.ini",		"temp/stdcpptest/general/testframework/testframework_mrtexp.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtnons.ini",	"temp/stdcpptest/general/testframework/testframework_mrtnons.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtopench.ini",	"temp/stdcpptest/general/testframework/testframework_mrtopench.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_ocw.ini",		"temp/stdcpptest/general/testframework/testframework_ocw.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtthread.ini",	"temp/stdcpptest/general/testframework/testframework_mrtthread.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrttypea.ini",	"temp/stdcpptest/general/testframework/testframework_mrttypea.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrttypei.ini",	"temp/stdcpptest/general/testframework/testframework_mrttypei.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_ct.ini",			"temp/stdcpptest/general/testframework/testframework_ct.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtmath.ini",	"temp/stdcpptest/general/testframework/testframework_mrtmath.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtmem.ini",		"temp/stdcpptest/general/testframework/testframework_mrtmem.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_mrtutil.ini",	"temp/stdcpptest/general/testframework/testframework_mrtutil.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_wc.ini",			"temp/stdcpptest/general/testframework/testframework_wc.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_tlocale.ini",	"temp/stdcpptest/general/testframework/testframework_tlocale.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/testframework_tstl_1.ini",		"temp/stdcpptest/general/testframework/testframework_tstl_1.ini") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/bccppwrap.cfg",				"temp/stdcpptest/general/testframework/bccppwrap.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCCSRuntimeSup.cfg",			"temp/stdcpptest/general/testframework/BCCSRuntimeSup.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCException.cfg",				"temp/stdcpptest/general/testframework/BCException.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCNoNamespace.cfg",			"temp/stdcpptest/general/testframework/BCNoNamespace.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCOpenCHeaders.cfg",			"temp/stdcpptest/general/testframework/BCOpenCHeaders.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCOpenCWrap.cfg",				"temp/stdcpptest/general/testframework/BCOpenCWrap.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCThread.cfg",					"temp/stdcpptest/general/testframework/BCThread.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCTypeAttrib.cfg",				"temp/stdcpptest/general/testframework/BCTypeAttrib.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/BCTypeInfo.cfg",				"temp/stdcpptest/general/testframework/BCTypeInfo.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/tmath_operations.cfg",			"temp/stdcpptest/general/testframework/tmath_operations.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/tmemory.cfg",					"temp/stdcpptest/general/testframework/tmemory.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/tutility.cfg",					"temp/stdcpptest/general/testframework/tutility.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/tlocale.cfg",					"temp/stdcpptest/general/testframework/tlocale.cfg") or die "failed : $!";
+copy($epoc . "winscw/c/testframework/tstl_1.cfg",					"temp/stdcpptest/general/testframework/tstl_1.cfg") or die "failed : $!";
+
+system("7z a -tzip stdcpptest.zip ./temp/*");
diff -r 6d65abb8bba1 -r b4b3727007b2 common/tools/ats/bctest/stdcpp/stdcpp.xml
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/tools/ats/bctest/stdcpp/stdcpp.xml	Fri Oct 16 19:26:06 2009 +0100
@@ -0,0 +1,882 @@
+<?xml version="1.0"?>
+<test>
+	<id>1</id>
+	<owner>admin</owner>
+	<priority>10</priority>
+	<buildid></buildid>
+	<name>STDCPP BC Tests</name>
+	<target>
+        <device rank="master" alias="emulator_udeb">
+            <property name="HARNESS" value="ATSINTERFACE" />
+        </device>
+	</target>
+	<plan id="" name="STDCPP BC WINSCW UDEB" harness="ATSINTERFACE" enabled="true" passrate="100">
+		<target>
+			<device rank="master" alias="emulator_udeb"/>
+		</target>
+		<session id="" name="STDCPP Compatibility Tests" harness="ATSINTERFACE" enabled="true" passrate="100">
+			<set id="" name="bccppwrap" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bccppwrap" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bccppwrap.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bccppwrap.dll"/>
+							<param dst="c:\sys\bin\bccppwrap.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="TestFramework_cppwrap.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/TestFramework_cppwrap.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bccppwrap.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bccppwrap.cfg"/>
+							<param dst="c:\testframework\bccppwrap.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bccppwrap (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\bccppwrap.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bccppwrap (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bccsruntimesup" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bccsruntimesup" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bccsruntimesup.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bccsruntimesup.dll"/>
+							<param dst="c:\sys\bin\bccsruntimesup.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtruntime.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtruntime.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bccsruntimesup.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bccsruntimesup.cfg"/>
+							<param dst="c:\testframework\bccsruntimesup.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bccsruntimesup (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\bccsruntimesup.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bccsruntimesup (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bcexception" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bcexception" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bcexception.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bcexception.dll"/>
+							<param dst="c:\sys\bin\bcexception.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="TestFramework_mrtexp.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/TestFramework_mrtexp.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcexception.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bcexception.cfg"/>
+							<param dst="c:\testframework\bcexception.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcexception (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\bcexception.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bcexception (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bcnonamespace" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bcnonamespace" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bcnonamespace.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bcnonamespace.dll"/>
+							<param dst="c:\sys\bin\bcnonamespace.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtnons.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtnons.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcnonamespace.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bcnonamespace.cfg"/>
+							<param dst="c:\testframework\bcnonamespace.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcnonamespace (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\bcnonamespace.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bcnonamespace (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bcopencheaders" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bcopencheaders" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bcopencheaders.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bcopencheaders.dll"/>
+							<param dst="c:\sys\bin\bcopencheaders.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtopench.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtopench.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcopencheaders.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bcopencheaders.cfg"/>
+							<param dst="c:\testframework\bcopencheaders.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcopencheaders (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\bcopencheaders.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bcopencheaders (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bcopencwrap" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bcopencwrap" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bcopencwrap.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bcopencwrap.dll"/>
+							<param dst="c:\sys\bin\bcopencwrap.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_ocw.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_ocw.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcopencwrap.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bcopencwrap.cfg"/>
+							<param dst="c:\testframework\bcopencwrap.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcopencwrap (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\BCOpenCWrap.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bcopencwrap (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bcthread" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bcthread" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bcthread.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bcthread.dll"/>
+							<param dst="c:\sys\bin\bcthread.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtthread.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtthread.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcthread.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bcthread.cfg"/>
+							<param dst="c:\testframework\bcthread.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bcthread (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\bcthread.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bcthread (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bctypeattrib" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bctypeattrib" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bctypeattrib.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bctypeattrib.dll"/>
+							<param dst="c:\sys\bin\bctypeattrib.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrttypea.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrttypea.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bctypeattrib.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bctypeattrib.cfg"/>
+							<param dst="c:\testframework\bctypeattrib.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bctypeattrib (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\BCTypeAttrib.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bctypeattrib (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="bctypeinfo" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="bctypeinfo" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="bctypeinfo.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="bctypeinfo.dll"/>
+							<param dst="c:\sys\bin\bctypeinfo.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrttypei.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrttypei.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bctypeinfo.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/bctypeinfo.cfg"/>
+							<param dst="c:\testframework\bctypeinfo.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="bctypeinfo (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\BCTypeInfo.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="bctypeinfo (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="chartypes" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="chartypes" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="chartypes.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="chartypes.dll"/>
+							<param dst="c:\sys\bin\chartypes.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_ct.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_ct.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="chartypes (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule chartypes"/>
+							<param result-file="c:\spd_logs\xml\chartypes.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="chartypes (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="tmath_operations" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="tmath_operations" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="tmath_operations.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="tmath_operations.dll"/>
+							<param dst="c:\sys\bin\tmath_operations.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtmath.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtmath.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tmath_operations.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/tmath_operations.cfg"/>
+							<param dst="c:\testframework\tmath_operations.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tmath_operations (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\tmath_operations.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="tmath_operations (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="tmemory" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="tmemory" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="tmemory.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="tmemory.dll"/>
+							<param dst="c:\sys\bin\tmemory.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtmem.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtmem.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tmemory.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/tmemory.cfg"/>
+							<param dst="c:\testframework\tmemory.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tmemory (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\tmemory.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="tmemory (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="tutility" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="tutility" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="tutility.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="tutility.dll"/>
+							<param dst="c:\sys\bin\tutility.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_mrtutil.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_mrtutil.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tutility.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/tutility.cfg"/>
+							<param dst="c:\testframework\tutility.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tutility (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\tutility.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="tutility (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="widecharclassapibctest" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="widecharclassapibctest" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="widecharclassapibctest.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="widecharclassapibctest.dll"/>
+							<param dst="c:\sys\bin\widecharclassapibctest.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_wc.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_wc.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="widecharclassapibctest (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule widecharclassapiBCTest"/>
+							<param result-file="c:\spd_logs\xml\widecharclassapibctest.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="widecharclassapibctest (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="tstl" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="tstl" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="tstl_1.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="tstl_1.dll"/>
+							<param dst="c:\sys\bin\tstl_1.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_tstl_1.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_tstl_1.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tstl_1.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/tstl_1.cfg"/>
+							<param dst="c:\testframework\tstl_1.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tstl_1 (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\tstl_1.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="tstl_1 (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+			<set id="" name="tlocale" harness="ATSINTERFACE" enabled="true" passrate="100">
+				<case id="" name="tlocale" harness="ATSINTERFACE" enabled="true" passrate="100">
+                    <step id="" name="SPD_Logs XML (makedir)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+                        <command>makedir</command>
+                        <params>
+                            <param dir="c:\spd_logs\xml" /> 
+                        </params>
+                    </step>
+                    <step id="" name="tlocale.dll (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="binary"/>
+							<param src="tlocale.dll"/>
+							<param dst="c:\sys\bin\tlocale.dll"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="testframework_tlocale.ini (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/testframework_tlocale.ini"/>
+							<param dst="c:\testframework\testframework.ini"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tlocale.cfg (install)" harness="ATSINTERFACE" enabled="true" passrate="100" significant="false">
+						<command>install</command>
+						<params>
+							<param type="data"/>
+							<param src="testframework/tlocale.cfg"/>
+							<param dst="c:\testframework\tlocale.cfg"/>
+							<param component-path="stdcpptest" />
+						</params>
+					</step>
+					<step id="" name="tlocale (execute)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>execute</command>
+						<params>
+							<param file="atsinterface.exe"/>
+							<param parameters="-testmodule testscripter -config C:\TestFramework\tlocale.cfg"/>
+							<param result-file="c:\spd_logs\xml\testscripter.xml"/>
+                            <param timeout="1200"/>
+						</params>
+					</step>
+					<step id="" name="tlocale (fetch-log)" harness="ATSINTERFACE" enabled="true" passrate="100">
+						<command>fetch-log</command>
+						<params>
+							<param path="c:\logs\testframework\TestReport.txt" /> 
+						</params>
+					</step>
+				</case>
+			</set>
+		</session>
+	</plan>
+	<files>
+		<file>stdcpptest/winscw_udeb/bccppwrap.dll</file>
+		<file>stdcpptest/winscw_udeb/bccsruntimesup.dll</file>
+		<file>stdcpptest/winscw_udeb/bcexception.dll</file>
+		<file>stdcpptest/winscw_udeb/bcnonamespace.dll</file>
+		<file>stdcpptest/winscw_udeb/bcopencheaders.dll</file>
+		<file>stdcpptest/winscw_udeb/bcopencwrap.dll</file>
+		<file>stdcpptest/winscw_udeb/bcthread.dll</file>
+		<file>stdcpptest/winscw_udeb/bctypeattrib.dll</file>
+		<file>stdcpptest/winscw_udeb/bctypeinfo.dll</file>
+		<file>stdcpptest/winscw_udeb/chartypes.dll</file>
+		<file>stdcpptest/winscw_udeb/tmath_operations.dll</file>
+		<file>stdcpptest/winscw_udeb/tmemory.dll</file>
+		<file>stdcpptest/winscw_udeb/tutility.dll</file>
+		<file>stdcpptest/winscw_udeb/widecharclassapibctest.dll</file>
+		<file>stdcpptest/winscw_udeb/tstl_1.dll</file>
+		<file>stdcpptest/winscw_udeb/tlocale.dll</file>
+		<file>stdcpptest/general/testframework/testframework_cppwrap.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtruntime.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtexp.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtnons.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtopench.ini</file>
+		<file>stdcpptest/general/testframework/testframework_ocw.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtthread.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrttypea.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrttypei.ini</file>
+		<file>stdcpptest/general/testframework/testframework_ct.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtmath.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtmem.ini</file>
+		<file>stdcpptest/general/testframework/testframework_mrtutil.ini</file>
+		<file>stdcpptest/general/testframework/testframework_wc.ini</file>
+		<file>stdcpptest/general/testframework/testframework_tstl_1.ini</file>
+		<file>stdcpptest/general/testframework/testframework_tlocale.ini</file>
+		<file>stdcpptest/general/testframework/bccppwrap.cfg</file>
+		<file>stdcpptest/general/testframework/bccsruntimesup.cfg</file>
+		<file>stdcpptest/general/testframework/bcexception.cfg</file>
+		<file>stdcpptest/general/testframework/bcnonamespace.cfg</file>
+		<file>stdcpptest/general/testframework/bcopencheaders.cfg</file>
+		<file>stdcpptest/general/testframework/bcopencwrap.cfg</file>
+		<file>stdcpptest/general/testframework/bcthread.cfg</file>
+		<file>stdcpptest/general/testframework/bctypeattrib.cfg</file>
+		<file>stdcpptest/general/testframework/bctypeinfo.cfg</file>
+		<file>stdcpptest/general/testframework/tmath_operations.cfg</file>
+		<file>stdcpptest/general/testframework/tmemory.cfg</file>
+		<file>stdcpptest/general/testframework/tutility.cfg</file>
+		<file>stdcpptest/general/testframework/tstl_1.cfg</file>
+		<file>stdcpptest/general/testframework/tlocale.cfg</file>
+	</files>
+</test>