<?xml version="1.0" encoding="UTF-8"?>

<project name="SF-COMMON-CONFIG" xmlns:hlm="http://www.nokia.com/helium">

    <property environment="env"/> <!-- make environment variables available via env -->

    <dirname property="sf.common.config.dir" file="${ant.file.SF-COMMON-CONFIG}"/>

    <!-- import common properties -->

    <import file="${sf.common.config.dir}/common_props.ant.xml" />

    <!-- setup Helium internal properties from their equivalent in the project spec -->

    <property name="build.name" value="${sf.spec.job.name}"/>

    <property name="core.build.version" value="${sf.spec.job.codeline}"/>

    <property name="build.number" value="${sf.spec.job.number}"/>

    <property name="build.drive" value="${sf.spec.job.drive}"/>

    <property name="build.family" value="${sf.project.type}"/>

    <property name="email.from" value="${sf.spec.email.from}"/>

    <property name="local.free.space" value="${sf.spec.job.freespace}"/>

    <property name="network.free.space" value="${sf.spec.publish.network.freespace}"/>

    <property name="network.drive" value="${sf.spec.publish.networkdrive}"/>

    <property name="prep.root.dir" value="${sf.spec.job.rootdir}"/>

    <property name="publish" value="${sf.spec.publish.enable}"/>

    <property name="publish.root.dir" value="${sf.spec.publish.rootdir}"/>

    <property name="build.system" value="${sf.spec.build.system}"/>

    <property name="base_release.path" value="${sf.spec.baseline.location}"/>

    <property name="base_release.getenv_options" value="${sf.spec.baseline.getenv_options}"/>

    <!-- import all core HELIUM targets -->

    <import file="${helium.dir}/helium.ant.xml" />

    <!-- import common references -->

    <import file="${sf.common.config.dir}/common_refs.ant.xml" />

    <!-- conditional import of generated source spec if available -->

    <if><available  file="${sf.common.config.dir}/generated/source-spec.ant.xml" />

        <then>

            <echo message="Generated source spec found, importing..." />

            <import file="${sf.common.config.dir}/generated/source-spec.ant.xml"/>

        </then>

    </if>

    <target name="sf-prep" depends="sf-generate-source-spec,prep-drive,init-build-area,check-tool-dependencies,create-bom,log-build-env">

        <echo>[SF-PREP]</echo>

        <tempfile property="prep.dynamic.config" suffix="ant.xml" destdir="${temp.build.dir}"/>

    </target>

    <target name="sf-build-all" depends="sf-prebuild,sf-build-noprep,sf-postbuild">

        <echo>[SF-BUILD-ALL]</echo>

    </target>

    <target name="sf-build" depends="sf-prep,sf-prebuild,sf-build-noprep,sf-postbuild">

        <echo>[SF-BUILD]</echo>

    </target>

    <target name="sf-parse-project-config">

    <!-- TODO: Parse the project config and generate properties and csv file to be

    used by the builds. -->

        <echo message="Parse the project configuration" />

    </target>

    <target name="sf-generate-source-spec" depends="sf-parse-project-config">

        <!-- TODO: 1. Same file name souce-spec.ant.xml is used for all packages

        for multiple package builds, this needs to be linked with package name. -->

        <!-- TODO: 2. Change fmpp data to be a full property rather than relative path -->

        <fmpp sourceFile="${sf.common.config.dir}/templates/source-spec.ant.xml.ftl"

              outputFile="${sf.common.config.dir}/generated/source-spec.ant.xml">

              <data expandProperties="yes">

                    ant: antProperties()

                    data: csv(${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})

              </data>

        </fmpp>

    </target>

    <target name="sf-prebuild">

        <echo>[SF-PREBUILD]</echo>

        <!-- create BOM dir -->

        <mkdir dir="${build.drive}/output/logs/BOM"/>

        <!-- record project and config information in BOM files -->

        <delete file="${build.drive}/output/logs/BOM/config.csv" quiet="true"/>

        <exec executable="hg" dir="${sf.config.dir}" outputproperty="sf.job.bom.config.repo">

            <arg value="showconfig"/>

            <arg value="paths.default"/>

        </exec>

        <exec executable="hg" dir="${sf.config.dir}" outputproperty="sf.job.bom.config.rev">

            <arg value="identify"/>

            <arg value="-n"/>

        </exec>

        <exec executable="hg" dir="${sf.config.dir}" outputproperty="sf.job.bom.config.checksum">

            <arg value="identify"/>

            <arg value="-i"/>

        </exec>

        <echo message="dir ${sf.config.dir} : revision ${sf.job.bom.config.rev}:${sf.job.bom.config.checksum}"/>

        <exec executable="cmd" output="${build.drive}/output/logs/BOM/config.csv" append="true">

            <arg value="/c"/>

            <arg value="echo"/>

            <arg value="${sf.job.bom.config.repo},sf-config,${sf.job.bom.config.rev}:${sf.job.bom.config.checksum}"/>

        </exec>

        <delete file="${build.drive}/output/logs/BOM/project.csv" quiet="true"/>

        <exec executable="hg" dir="${sf.config.dir}/../build/config" outputproperty="sf.job.bom.project.repo">

            <arg value="showconfig"/>

            <arg value="paths.default"/>

        </exec>

        <exec executable="hg" dir="${sf.config.dir}/../build/config" outputproperty="sf.job.bom.project.rev">

            <arg value="identify"/>

            <arg value="-n"/>

        </exec>

        <exec executable="hg" dir="${sf.config.dir}/../build/config" outputproperty="sf.job.bom.project.checksum">

            <arg value="identify"/>

            <arg value="-i"/>

        </exec>

        <echo message="dir ${sf.config.dir}/../build/config : revision ${sf.job.bom.project.rev}:${sf.job.bom.project.checksum}"/>

        <exec executable="cmd" output="${build.drive}/output/logs/BOM/project.csv" append="true">

            <arg value="/c"/>

            <arg value="echo"/>

            <arg value="${sf.job.bom.project.repo},build/config,${sf.job.bom.project.rev}:${sf.job.bom.project.checksum}"/>

        </exec>

        <if>

            <istrue value="${sf.spec.baseline.enable}" />

            <then>

                <!-- record baseline information in BOM file -->

                <delete file="${build.drive}/output/logs/BOM/baseline.txt" quiet="true"/>

                <exec executable="cmd" output="${build.drive}/output/logs/BOM/baseline.txt">

                    <arg value="/c"/>

                    <arg value="echo"/>

                    <arg value="${sf.spec.baseline.location}"/>

                </exec>

                <!-- run interal target preparation-getenv -->

                <runtarget target="preparation-getenv"/>

            </then>

            <else>

                <!-- record fact that no baseline used. required by diamondize-bom  -->

                <touch file="${build.drive}/output/logs/BOM/baseline.txt"/>

            </else>

        </if>

        <if>

            <istrue value="${sf.spec.sourcesync.enable}" />

            <then>

                <runtarget target="sf-get-source"/>

                <if><istrue value="${sf.spec.package.src.enable}"/>

                <then>

                    <echo message="INFO Packaging Source"/>

                    <runtarget target="sf-package-source"/>

                </then>

                </if>

                <runtarget target="sf-unpack-rnd"/>

            </then>

            <else>

                <!-- record fact that no sources.csv used. required by diamondize-bom  -->

                <touch file="${build.log.dir}/BOM/sources.csv"/> 

            </else>

        </if>        

      <if>

        <istrue value="${sf.spec.publish.enable}"/>

        <then>

          <runtarget target="sf-diamondize-bom"/>

        </then>

      </if>

    </target>

    <target name="sf-postbuild">

        <echo>[SF-POSTBUILD]</echo>

        <!-- TAG SOURCE CODE -->

        <if>

            <istrue value="${sf.spec.tagafterbuild.enable}" />

            <then>

                <echo message="Apply tag to the source code used in this build"/>

                <runtarget target="sf-tag-hg-code"/>

            </then>

        </if>

        <if>

            <istrue value="${sf.spec.package.bin.enable}"/>

            <then>

                <echo message="INFO Packaging Binaries"/>

                <runtarget target="sf-package-binary"/>

            </then>

        </if>

        <if><istrue value="${sf.spec.test.sendpkg.enable}"/>

            <then>

                <runtarget target="sf-send-testpkg"/>

            </then>

        </if>

        <!-- run build analysis tools -->

        <runtarget target="sf-run-analysis"/>

        <runtarget target="sf-zip-logs"/>

        <!-- PUBLISH LOGS/REPORTS -->

        <if>

            <istrue value="${sf.spec.publish.enable}" />

            <then>

                <echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>

                <runtarget target="publish"/>

            </then>

        </if>

    </target>

    <!-- package all logs into zipfile before publish -->

    <target name="sf-zip-logs">

        <if>

            <istrue value="${sf.spec.logs.zip.enable}"/>

            <then>

                <property name="temp.log.zip" value="${env.TEMP}/build_logs_${sf.spec.job.name}_${build.number}.zip"/>

                <echo message="Zip log requested, zipping logs..."/>

                <zip destfile="${temp.log.zip}" basedir="${build.log.dir}"/>

                <move file="${temp.log.zip}" todir="${build.log.dir}" failonerror="false"/>

            </then>

        </if>

    </target>

    <!-- generate dir list using passed location and name 

    if a baseline list is available then generate deltas too -->

    <target name="sf-list-dir">

        <property name="sf.currentlist.name"   value="${sf.list.name}"/> 

        <property name="sf.dir.location" value="${build.drive}/epoc32"/> 

        <if>

            <istrue value="${sf.spec.dirlist.enable}"/>

            <then>

                <echo message="Dirlist name: ${sf.currentlist.name} requested for ${sf.dir.location}"/>

                <exec executable="perl" dir="${build.log.dir}/" failonerror="true" output="${build.log.dir}/listdir_${build.id}_${sf.currentlist.name}.log">

                    <arg value="${sf.common.config.dir}/tools/listdir.pl"/>

                    <arg value="${sf.dir.location}"/>

                </exec>

            </then>

        </if>

    </target>

    <target name="sf-delta-dir">

        <property name="sf.currentlist_a.name"   value="${sf.list_a.name}"/> 

        <property name="sf.currentlist_b.name"   value="${sf.list_b.name}"/>

        <property name="sf.dir.location" value="${build.drive}/epoc32"/> 

        <if>

            <istrue value="${sf.spec.dirdelta.enable}"/>

            <then>

                <echo message="Delta requested for ${sf.currentlist_a.name} vs ${sf.currentlist_b.name} "/>

                <exec executable="perl" dir="${build.log.dir}/" failonerror="true" output="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}_delta.log">

                    <arg value="${sf.common.config.dir}/tools/difflist.pl"/>

                    <arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_a.name}.log"/>

                    <arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}.log"/>

                </exec>

            </then>

        </if>

    </target>

    <target name="sf-intersect-dir">

        <property name="sf.currentlist_a.name"   value="${sf.list_a.name}"/> 

        <property name="sf.currentlist_b.name"   value="${sf.list_b.name}"/>

        <property name="sf.dir.location" value="${build.drive}/epoc32"/> 

        <if>

            <istrue value="${sf.spec.dirdelta.enable}"/>

            <then>

                <echo message="Inersection requested for ${sf.currentlist_a.name} vs ${sf.currentlist_b.name} "/>

                <exec executable="perl" dir="${build.log.dir}/" failonerror="true" output="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}_intersect.log">

                    <arg value="${sf.common.config.dir}/tools/difflist.pl"/>

                    <arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_a.name}.log"/>

                    <arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}.log"/>

                    <arg value="-I"/> <!-- run difflist in intersect mode -->

                </exec>

            </then>

        </if>

    </target>

    <target name="sf-build-noprep" depends="sf-compile">

        <echo>[SF-BUILD-NOPREP]</echo>

    </target>

    <target name="create-canonical-sysdef-file">

        <if>

            <istrue value="${sf.spec.systemdefinition.assemble}"/>

            <then>

                <echo message="Calling Helium create-canonical-sysdef-file target to assemble sysdef fragments."/>

                <runtarget target="compile.create-canonical-sysdef-file"/>

            </then>

            <else>

                <echo message="Will use ${build.drive}/${sf.spec.systemdefinition.location} as is as sysdef file"/>

                <copy file="${build.drive}/${sf.spec.systemdefinition.location}" tofile="${build.drive}/output/build/canonical_system_definition.xml" failonerror="true" verbose="true"/>

            </else>

        </if>

    </target>

    <target name="sf-compile">    

        <!-- TODO: add here assigments to raptor-related ant references -->

        <!-- hlm:argSet id="sbs.tools.var">

            <hlm:arg name="config" value="${sf.spec.sbs.config}" />

            <hlm:arg name="singlejob" value="..." />

            <hlm:arg name="enable-filter" value="..." />

        </hlm:argSet -->

        <!-- target name="compile-main-prebuild" -->

        <antcall target="compile-main" inheritAll="false">

            <param name="build.system" value="${sf.spec.build.system}"/>

            <param name="sysdef.configurations.list" value="${sf.spec.sysdef.configurations.list}" />

            <!--<reference refid="sf.system.definition.files" torefid="system.definition.files" />-->

        </antcall>    

    </target>

    <target name="sf-get-source" depends="sf-generate-source-spec">

        <ant antfile="${sf.common.config.dir}/generated/source-spec.ant.xml" />

    </target>

    <target name="sf-tag-hg-code">

        <property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>

        <fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"

              outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">

            <data expandProperties="yes">

                ant: antProperties()

                data: csv(${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})

            </data>

        </fmpp>

        <ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>

    </target>

    <target name="sf-diamondize-bom">

        <fmpp sourceFile="${sf.common.config.dir}/templates/build-info.xml.ftl"

              outputFile="${build.drive}/output/logs/BOM/build-info.xml">

            <data expandProperties="yes">

                ant: antProperties()

                config: csv(${build.drive}/output/logs/BOM/config.csv,{separator:',',headers:[loc,dst,rev]})

                project: csv(${build.drive}/output/logs/BOM/project.csv,{separator:',',headers:[loc,dst,rev]})

                baseline: slicedText(${build.drive}/output/logs/BOM/baseline.txt,{trim})

                sources: csv(${build.drive}/output/logs/BOM/sources.csv,{separator:',',headers:[loc,dst,rev]})              

            </data>

        </fmpp>

    </target>

    <target name="sf-preprocess-package-config">

        <mkdir dir="${sf.common.config.dir}/generated"/>

        <exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zipconfig.log">

            <arg value="${sf.common.config.dir}/tools/populateziptemplate.pl"/>

            <arg value="${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}"/>

            <arg value="${sf.common.config.dir}/templates/zip.cfg.xml.ftl.template"/>

            <arg value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>

        </exec>

    </target>

    <target name="sf-zip-content" depends="preprocess-zip-config">

        <property name="zip.${zip.target.name}.log.file" location="${build.log.dir}/${build.id}_${zip.target.name}_zip.log" />

        <property name="zips.${zip.target.name}.spec.name" value="${zip.target.name}" />

        <hlm:zipContentMacro type="${zip.target.name}" file="${zip.config.file}" />

    </target>

    <target name="sf-package-source" depends="sf-preprocess-package-config">

        <antcall target="sf-zip-content">

            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="src" />

        </antcall>

    </target>

    <target name="sf-package-binary" depends="sf-preprocess-package-config,sf-package-postbuild-rnd">

        <!--antcall target="sf-zip-content">

            <param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>

            <param name="zip.target.name" value="bin" />

        </antcall-->

        <if><available file="${build.drive}/rnd_excludefile.txt" />

        <then>

            <echo message="Packaging with exclude list"/>

            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">

            <arg value="a"/>

            <arg value="-tzip"/>

            <arg value="-x@${build.drive}/rnd_excludefile.txt"/> <!-- excludes -->

            <arg value="-x!epoc32\build"/> 

            <arg value="-xr!*.sym"/> 

            <arg value="binaries_epoc.zip"/> 

            <arg value="epoc32\"/>

            </exec>

            <move file="${build.drive}/rnd_excludefile.txt" todir="${build.log.dir}/"/>

        </then>

        <else>

            <echo message="Packaging without exclude list"/>

            <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">

            <arg value="a"/>

            <arg value="-tzip"/>

            <arg value="-x!epoc32\build"/> <!-- excludes -->

            <arg value="-xr!*.sym"/> 

            <arg value="binaries_epoc.zip"/> 

            <arg value="epoc32\"/>

        </exec>

        </else>

        </if>

        <if><available file="${build.drive}/binaries_epoc.zip"/>

        <then><move file="${build.drive}/binaries_epoc.zip" todir="${build.drive}/output/zips/"/></then>

        </if>

    </target>

    <target name="sf-package-postbuild-rnd" depends="sf-preprocess-package-config">

        <!-- zip any RnD _includefile.txt files generated during source packaging -->

        <exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zip_postbuild.log">

            <arg value="${sf.common.config.dir}/tools/zip_includefiles.pl"/>

        </exec>

        <!-- cleanup my moving includefiles to logs and zips to zips\postbuild -->

        <move todir="${build.log.dir}">

           <fileset dir="${build.drive}"><include name="*_includefile.txt"/></fileset>

        </move>

        <move todir="${build.drive}/output/zips/postbuild">

           <fileset dir="${build.drive}"><include name="bin_rnd_*.zip"/></fileset>

        </move>

        <!-- TODO: merge with release_metadata.xml ? -->

    </target>

    <!-- unpack rnd zips if available -->

    <target name="sf-unpack-rnd">

        <echo message="Unpacking any available RnD binaries"/>

        <exec executable="7za" dir="${build.drive}" output="${build.log.dir}/unzip_${build.id}_binaries_rnd.log">

        <arg value="x"/>

        <arg value="${build.drive}/output/zips/bin_rnd*.zip"/>

        </exec>

    </target>

    <target name ="sf-make-junction">

        <mkdir dir="${sf.spec.test.epocroot}"/>

        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_make_junction.log">

        <arg value="make_junction.pl"/>

        <arg value="--link=${sf.spec.test.epocroot}/epoc32"/>

        <arg value="--target=${build.drive}/epoc32"/>

        <arg value="--force"/>

      </exec>

    </target>

    <target name ="sf-delete-junction">

        <exec executable="junction.exe" dir="${sf.spec.test.epocroot}" failonerror="false" output="${build.log.dir}/ATS_${build.id}_delete_junction.log">

        <arg value="-d"/>

        <arg value="epoc32"/>

      </exec>

    </target>  

    <target name="sf-send-testpkg" depends="sf-make-junction">

        <mkdir dir="${sf.spec.test.package.droppath}"/>

        <echo message="Sending test package ${sf.spec.test.package.name} to ${sf.spec.test.host.name} path ${sf.spec.test.host.droppath}"/>

        <exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_testdrop.log">

            <arg value="ats3_testdrop.pl"/>

            <arg value="--host=${sf.spec.test.host.name}"/>

            <arg value="--username=${sf.spec.test.host.username}"/>

            <arg value="--password=${sf.spec.test.host.password}"/>

            <arg value="--local-test-pkg=${sf.spec.test.package.name}"/>

            <arg value="--local-drop-path=${sf.spec.test.package.droppath}"/>

            <arg value="--host-drop-path=${sf.spec.test.host.droppath}"/>

        </exec>

    </target>

    <!-- runs analysis of missing bins and source -->

    <target name="sf-run-analysis">

        <mkdir dir="${build.log.dir}/analysis"/>

        <echo message="Running source analysis of ANT output"/>

        <exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">

            <arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>

            <arg value="*ant*"/>

        </exec>

        <echo message="Running list analysis"/>

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">

            <arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>

            <arg value="..\"/>

        </exec>

        <echo message="Running whatlog analysis"/>

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">

            <arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>

            <arg value="..\"/>

        </exec>

        <echo message="Running summary analysis"/>

        <exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">

            <arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>