<?xml version="1.0" encoding="UTF-8"?>
<project name="SF-COMMON-CONFIG" xmlns:hlm="http://www.nokia.com/helium">
<property environment="env"/> <!-- make environment variables available via env -->
<dirname property="sf.common.config.dir" file="${ant.file.SF-COMMON-CONFIG}"/>
<!-- import common properties -->
<import file="${sf.common.config.dir}/common_props.ant.xml" />
<!-- setup Helium internal properties from their equivalent in the project spec -->
<property name="build.name" value="${sf.spec.job.name}"/>
<property name="core.build.version" value="${sf.spec.job.codeline}"/>
<property name="build.number" value="${sf.spec.job.number}"/>
<property name="build.drive" value="${sf.spec.job.drive}"/>
<property name="build.family" value="${sf.project.type}"/>
<property name="email.from" value="${sf.spec.email.from}"/>
<property name="local.free.space" value="${sf.spec.job.freespace}"/>
<property name="network.free.space" value="${sf.spec.publish.network.freespace}"/>
<property name="network.drive" value="${sf.spec.publish.networkdrive}"/>
<property name="prep.root.dir" value="${sf.spec.job.rootdir}"/>
<property name="publish" value="${sf.spec.publish.enable}"/>
<property name="publish.root.dir" value="${sf.spec.publish.rootdir}"/>
<property name="build.system" value="${sf.spec.build.system}"/>
<property name="base_release.path" value="${sf.spec.baseline.location}"/>
<property name="base_release.getenv_options" value="${sf.spec.baseline.getenv_options}"/>
<!-- import all core HELIUM targets -->
<import file="${helium.dir}/helium.ant.xml" />
<!-- import common references -->
<import file="${sf.common.config.dir}/common_refs.ant.xml" />
<!-- conditional import of generated source spec if available -->
<if><available file="${sf.common.config.dir}/generated/source-spec.ant.xml" />
<then>
<echo message="Generated source spec found, importing..." />
<import file="${sf.common.config.dir}/generated/source-spec.ant.xml"/>
</then>
</if>
<target name="sf-prep" depends="sf-generate-source-spec,prep-drive,init-build-area,check-tool-dependencies,create-bom,log-build-env">
<echo>[SF-PREP]</echo>
<tempfile property="prep.dynamic.config" suffix="ant.xml" destdir="${temp.build.dir}"/>
</target>
<target name="sf-build-all" depends="sf-prebuild,sf-build-noprep,sf-postbuild">
<echo>[SF-BUILD-ALL]</echo>
</target>
<target name="sf-build" depends="sf-prep,sf-prebuild,sf-build-noprep,sf-postbuild">
<echo>[SF-BUILD]</echo>
</target>
<target name="sf-parse-project-config">
<!-- TODO: Parse the project config and generate properties and csv file to be
used by the builds. -->
<echo message="Parse the project configuration" />
</target>
<target name="sf-generate-source-spec" depends="sf-parse-project-config">
<!-- TODO: 1. Same file name souce-spec.ant.xml is used for all packages
for multiple package builds, this needs to be linked with package name. -->
<!-- TODO: 2. Change fmpp data to be a full property rather than relative path -->
<fmpp sourceFile="${sf.common.config.dir}/templates/source-spec.ant.xml.ftl"
outputFile="${sf.common.config.dir}/generated/source-spec.ant.xml">
<data expandProperties="yes">
ant: antProperties()
data: csv(${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
</data>
</fmpp>
</target>
<target name="sf-prebuild">
<echo>[SF-PREBUILD]</echo>
<!-- create BOM dir -->
<mkdir dir="${build.drive}/output/logs/BOM"/>
<!-- record project and config information in BOM files -->
<delete file="${build.drive}/output/logs/BOM/config.csv" quiet="true"/>
<exec executable="hg" dir="${sf.config.dir}" outputproperty="sf.job.bom.config.repo">
<arg value="showconfig"/>
<arg value="paths.default"/>
</exec>
<exec executable="hg" dir="${sf.config.dir}" outputproperty="sf.job.bom.config.rev">
<arg value="identify"/>
<arg value="-n"/>
</exec>
<exec executable="hg" dir="${sf.config.dir}" outputproperty="sf.job.bom.config.checksum">
<arg value="identify"/>
<arg value="-i"/>
</exec>
<echo message="dir ${sf.config.dir} : revision ${sf.job.bom.config.rev}:${sf.job.bom.config.checksum}"/>
<exec executable="cmd" output="${build.drive}/output/logs/BOM/config.csv" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="${sf.job.bom.config.repo},sf-config,${sf.job.bom.config.rev}:${sf.job.bom.config.checksum}"/>
</exec>
<delete file="${build.drive}/output/logs/BOM/project.csv" quiet="true"/>
<exec executable="hg" dir="${sf.config.dir}/../build/config" outputproperty="sf.job.bom.project.repo">
<arg value="showconfig"/>
<arg value="paths.default"/>
</exec>
<exec executable="hg" dir="${sf.config.dir}/../build/config" outputproperty="sf.job.bom.project.rev">
<arg value="identify"/>
<arg value="-n"/>
</exec>
<exec executable="hg" dir="${sf.config.dir}/../build/config" outputproperty="sf.job.bom.project.checksum">
<arg value="identify"/>
<arg value="-i"/>
</exec>
<echo message="dir ${sf.config.dir}/../build/config : revision ${sf.job.bom.project.rev}:${sf.job.bom.project.checksum}"/>
<exec executable="cmd" output="${build.drive}/output/logs/BOM/project.csv" append="true">
<arg value="/c"/>
<arg value="echo"/>
<arg value="${sf.job.bom.project.repo},build/config,${sf.job.bom.project.rev}:${sf.job.bom.project.checksum}"/>
</exec>
<if>
<istrue value="${sf.spec.baseline.enable}" />
<then>
<!-- record baseline information in BOM file -->
<delete file="${build.drive}/output/logs/BOM/baseline.txt" quiet="true"/>
<exec executable="cmd" output="${build.drive}/output/logs/BOM/baseline.txt">
<arg value="/c"/>
<arg value="echo"/>
<arg value="${sf.spec.baseline.location}"/>
</exec>
<!-- run interal target preparation-getenv -->
<runtarget target="preparation-getenv"/>
</then>
<else>
<!-- record fact that no baseline used. required by diamondize-bom -->
<touch file="${build.drive}/output/logs/BOM/baseline.txt"/>
</else>
</if>
<if>
<istrue value="${sf.spec.sourcesync.enable}" />
<then>
<runtarget target="sf-get-source"/>
<if><istrue value="${sf.spec.package.src.enable}"/>
<then>
<echo message="INFO Packaging Source"/>
<runtarget target="sf-package-source"/>
</then>
</if>
<runtarget target="sf-unpack-rnd"/>
</then>
<else>
<!-- record fact that no sources.csv used. required by diamondize-bom -->
<touch file="${build.log.dir}/BOM/sources.csv"/>
</else>
</if>
<if>
<istrue value="${sf.spec.publish.enable}"/>
<then>
<runtarget target="sf-diamondize-bom"/>
</then>
</if>
</target>
<target name="sf-postbuild">
<echo>[SF-POSTBUILD]</echo>
<!-- TAG SOURCE CODE -->
<if>
<istrue value="${sf.spec.tagafterbuild.enable}" />
<then>
<echo message="Apply tag to the source code used in this build"/>
<runtarget target="sf-tag-hg-code"/>
</then>
</if>
<if>
<istrue value="${sf.spec.package.bin.enable}"/>
<then>
<echo message="INFO Packaging Binaries"/>
<runtarget target="sf-package-binary"/>
</then>
</if>
<if><istrue value="${sf.spec.test.sendpkg.enable}"/>
<then>
<runtarget target="sf-send-testpkg"/>
</then>
</if>
<!-- run build analysis tools -->
<runtarget target="sf-run-analysis"/>
<runtarget target="sf-zip-logs"/>
<!-- PUBLISH LOGS/REPORTS -->
<if>
<istrue value="${sf.spec.publish.enable}" />
<then>
<echo message="Publish log files and reports to ${sf.spec.publish.rootdir}"/>
<runtarget target="publish"/>
</then>
</if>
</target>
<!-- package all logs into zipfile before publish -->
<target name="sf-zip-logs">
<if>
<istrue value="${sf.spec.logs.zip.enable}"/>
<then>
<property name="temp.log.zip" value="${env.TEMP}/build_logs_${sf.spec.job.name}_${build.number}.zip"/>
<echo message="Zip log requested, zipping logs..."/>
<zip destfile="${temp.log.zip}" basedir="${build.log.dir}"/>
<move file="${temp.log.zip}" todir="${build.log.dir}" failonerror="false"/>
</then>
</if>
</target>
<!-- generate dir list using passed location and name
if a baseline list is available then generate deltas too -->
<target name="sf-list-dir">
<property name="sf.currentlist.name" value="${sf.list.name}"/>
<property name="sf.dir.location" value="${build.drive}/epoc32"/>
<if>
<istrue value="${sf.spec.dirlist.enable}"/>
<then>
<echo message="Dirlist name: ${sf.currentlist.name} requested for ${sf.dir.location}"/>
<exec executable="perl" dir="${build.log.dir}/" failonerror="true" output="${build.log.dir}/listdir_${build.id}_${sf.currentlist.name}.log">
<arg value="${sf.common.config.dir}/tools/listdir.pl"/>
<arg value="${sf.dir.location}"/>
</exec>
</then>
</if>
</target>
<target name="sf-delta-dir">
<property name="sf.currentlist_a.name" value="${sf.list_a.name}"/>
<property name="sf.currentlist_b.name" value="${sf.list_b.name}"/>
<property name="sf.dir.location" value="${build.drive}/epoc32"/>
<if>
<istrue value="${sf.spec.dirdelta.enable}"/>
<then>
<echo message="Delta requested for ${sf.currentlist_a.name} vs ${sf.currentlist_b.name} "/>
<exec executable="perl" dir="${build.log.dir}/" failonerror="true" output="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}_delta.log">
<arg value="${sf.common.config.dir}/tools/difflist.pl"/>
<arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_a.name}.log"/>
<arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}.log"/>
</exec>
</then>
</if>
</target>
<target name="sf-intersect-dir">
<property name="sf.currentlist_a.name" value="${sf.list_a.name}"/>
<property name="sf.currentlist_b.name" value="${sf.list_b.name}"/>
<property name="sf.dir.location" value="${build.drive}/epoc32"/>
<if>
<istrue value="${sf.spec.dirdelta.enable}"/>
<then>
<echo message="Inersection requested for ${sf.currentlist_a.name} vs ${sf.currentlist_b.name} "/>
<exec executable="perl" dir="${build.log.dir}/" failonerror="true" output="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}_intersect.log">
<arg value="${sf.common.config.dir}/tools/difflist.pl"/>
<arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_a.name}.log"/>
<arg value="${build.log.dir}/listdir_${build.id}_${sf.currentlist_b.name}.log"/>
<arg value="-I"/> <!-- run difflist in intersect mode -->
</exec>
</then>
</if>
</target>
<target name="sf-build-noprep" depends="sf-compile">
<echo>[SF-BUILD-NOPREP]</echo>
</target>
<target name="create-canonical-sysdef-file">
<if>
<istrue value="${sf.spec.systemdefinition.assemble}"/>
<then>
<echo message="Calling Helium create-canonical-sysdef-file target to assemble sysdef fragments."/>
<runtarget target="compile.create-canonical-sysdef-file"/>
</then>
<else>
<echo message="Will use ${build.drive}/${sf.spec.systemdefinition.location} as is as sysdef file"/>
<copy file="${build.drive}/${sf.spec.systemdefinition.location}" tofile="${build.drive}/output/build/canonical_system_definition.xml" failonerror="true" verbose="true"/>
</else>
</if>
</target>
<target name="sf-compile">
<!-- TODO: add here assigments to raptor-related ant references -->
<!-- hlm:argSet id="sbs.tools.var">
<hlm:arg name="config" value="${sf.spec.sbs.config}" />
<hlm:arg name="singlejob" value="..." />
<hlm:arg name="enable-filter" value="..." />
</hlm:argSet -->
<!-- target name="compile-main-prebuild" -->
<antcall target="compile-main" inheritAll="false">
<param name="build.system" value="${sf.spec.build.system}"/>
<param name="sysdef.configurations.list" value="${sf.spec.sysdef.configurations.list}" />
<!--<reference refid="sf.system.definition.files" torefid="system.definition.files" />-->
</antcall>
</target>
<target name="sf-get-source" depends="sf-generate-source-spec">
<ant antfile="${sf.common.config.dir}/generated/source-spec.ant.xml" />
</target>
<target name="sf-tag-hg-code">
<property name="sf.tagafterbuild.tag" value="${sf.spec.job.name}_${sf.spec.job.codeline}.${sf.spec.job.number}"/>
<fmpp sourceFile="${sf.common.config.dir}/templates/tag-hg-code.ant.xml.ftl"
outputFile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml">
<data expandProperties="yes">
ant: antProperties()
data: csv(${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}, {separator:','})
</data>
</fmpp>
<ant antfile="${sf.common.config.dir}/generated/tag-hg-code.ant.xml"/>
</target>
<target name="sf-diamondize-bom">
<fmpp sourceFile="${sf.common.config.dir}/templates/build-info.xml.ftl"
outputFile="${build.drive}/output/logs/BOM/build-info.xml">
<data expandProperties="yes">
ant: antProperties()
config: csv(${build.drive}/output/logs/BOM/config.csv,{separator:',',headers:[loc,dst,rev]})
project: csv(${build.drive}/output/logs/BOM/project.csv,{separator:',',headers:[loc,dst,rev]})
baseline: slicedText(${build.drive}/output/logs/BOM/baseline.txt,{trim})
sources: csv(${build.drive}/output/logs/BOM/sources.csv,{separator:',',headers:[loc,dst,rev]})
</data>
</fmpp>
</target>
<target name="sf-preprocess-package-config">
<mkdir dir="${sf.common.config.dir}/generated"/>
<exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zipconfig.log">
<arg value="${sf.common.config.dir}/tools/populateziptemplate.pl"/>
<arg value="${sf.project.location}/${sf.spec.sourcesync.sourcespecfile}"/>
<arg value="${sf.common.config.dir}/templates/zip.cfg.xml.ftl.template"/>
<arg value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
</exec>
</target>
<target name="sf-zip-content" depends="preprocess-zip-config">
<property name="zip.${zip.target.name}.log.file" location="${build.log.dir}/${build.id}_${zip.target.name}_zip.log" />
<property name="zips.${zip.target.name}.spec.name" value="${zip.target.name}" />
<hlm:zipContentMacro type="${zip.target.name}" file="${zip.config.file}" />
</target>
<target name="sf-package-source" depends="sf-preprocess-package-config">
<antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="src" />
</antcall>
</target>
<target name="sf-package-binary" depends="sf-preprocess-package-config,sf-package-postbuild-rnd">
<!--antcall target="sf-zip-content">
<param name="zip.config.file" value="${sf.common.config.dir}/generated/zip.cfg.xml.ftl"/>
<param name="zip.target.name" value="bin" />
</antcall-->
<if><available file="${build.drive}/rnd_excludefile.txt" />
<then>
<echo message="Packaging with exclude list"/>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x@${build.drive}/rnd_excludefile.txt"/> <!-- excludes -->
<arg value="-x!epoc32\build"/>
<arg value="-xr!*.sym"/>
<arg value="binaries_epoc.zip"/>
<arg value="epoc32\"/>
</exec>
<move file="${build.drive}/rnd_excludefile.txt" todir="${build.log.dir}/"/>
</then>
<else>
<echo message="Packaging without exclude list"/>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/zip_${build.id}_binaries_epoc32.log">
<arg value="a"/>
<arg value="-tzip"/>
<arg value="-x!epoc32\build"/> <!-- excludes -->
<arg value="-xr!*.sym"/>
<arg value="binaries_epoc.zip"/>
<arg value="epoc32\"/>
</exec>
</else>
</if>
<if><available file="${build.drive}/binaries_epoc.zip"/>
<then><move file="${build.drive}/binaries_epoc.zip" todir="${build.drive}/output/zips/"/></then>
</if>
</target>
<target name="sf-package-postbuild-rnd" depends="sf-preprocess-package-config">
<!-- zip any RnD _includefile.txt files generated during source packaging -->
<exec executable="perl" dir="${build.drive}/" failonerror="false" output="${build.log.dir}/zip_postbuild.log">
<arg value="${sf.common.config.dir}/tools/zip_includefiles.pl"/>
</exec>
<!-- cleanup my moving includefiles to logs and zips to zips\postbuild -->
<move todir="${build.log.dir}">
<fileset dir="${build.drive}"><include name="*_includefile.txt"/></fileset>
</move>
<move todir="${build.drive}/output/zips/postbuild">
<fileset dir="${build.drive}"><include name="bin_rnd_*.zip"/></fileset>
</move>
<!-- TODO: merge with release_metadata.xml ? -->
</target>
<!-- unpack rnd zips if available -->
<target name="sf-unpack-rnd">
<echo message="Unpacking any available RnD binaries"/>
<exec executable="7za" dir="${build.drive}" output="${build.log.dir}/unzip_${build.id}_binaries_rnd.log">
<arg value="x"/>
<arg value="${build.drive}/output/zips/bin_rnd*.zip"/>
</exec>
</target>
<target name ="sf-make-junction">
<mkdir dir="${sf.spec.test.epocroot}"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_make_junction.log">
<arg value="make_junction.pl"/>
<arg value="--link=${sf.spec.test.epocroot}/epoc32"/>
<arg value="--target=${build.drive}/epoc32"/>
<arg value="--force"/>
</exec>
</target>
<target name ="sf-delete-junction">
<exec executable="junction.exe" dir="${sf.spec.test.epocroot}" failonerror="false" output="${build.log.dir}/ATS_${build.id}_delete_junction.log">
<arg value="-d"/>
<arg value="epoc32"/>
</exec>
</target>
<target name="sf-send-testpkg" depends="sf-make-junction">
<mkdir dir="${sf.spec.test.package.droppath}"/>
<echo message="Sending test package ${sf.spec.test.package.name} to ${sf.spec.test.host.name} path ${sf.spec.test.host.droppath}"/>
<exec executable="perl" dir="${sf.common.config.dir}/tools/ats" failonerror="false" output="${build.log.dir}/ATS_${build.id}_testdrop.log">
<arg value="ats3_testdrop.pl"/>
<arg value="--host=${sf.spec.test.host.name}"/>
<arg value="--username=${sf.spec.test.host.username}"/>
<arg value="--password=${sf.spec.test.host.password}"/>
<arg value="--local-test-pkg=${sf.spec.test.package.name}"/>
<arg value="--local-drop-path=${sf.spec.test.package.droppath}"/>
<arg value="--host-drop-path=${sf.spec.test.host.droppath}"/>
</exec>
</target>
<!-- runs analysis of missing bins and source -->
<target name="sf-run-analysis">
<mkdir dir="${build.log.dir}/analysis"/>
<echo message="Running source analysis of ANT output"/>
<exec executable="perl" dir="${build.log.dir}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_scan_ant.log">
<arg value="${sf.common.config.dir}/tools/analysis/scan_antlogs.pl"/>
<arg value="*ant*"/>
</exec>
<echo message="Running list analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_list_results.log">
<arg value="${sf.common.config.dir}/tools/analysis/parselistdirs.pl"/>
<arg value="..\"/>
</exec>
<echo message="Running whatlog analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_what_results.csv">
<arg value="${sf.common.config.dir}/tools/analysis/parsewhatlog.pl"/>
<arg value="..\"/>
</exec>
<echo message="Running summary analysis"/>
<exec executable="perl" dir="${build.log.dir}/analysis" failonerror="false" output="${build.log.dir}/analysis/${build.id}_summary.log">
<arg value="${sf.common.config.dir}/tools/analysis/merge_csv.pl"/>
<arg value="${build.id}_what_results.csv"/>
<arg value="${build.id}_list_results.log"/>
</exec>
<echo message="Running collision analysis"/>
<exec executable="perl" dir="${build.drive}" failonerror="false" output="${build.log.dir}/analysis/${build.id}_collisions.log">
<arg value="${sf.common.config.dir}/tools/analysis/find_collisions.pl"/>
<arg value="${build.log.dir}/analysis/${build.id}_what_results.csv"/>
</exec>
</target>
</project>