Initial contribution of the euart driver by Accenture.
authorgeorge.norton
Thu, 01 Jul 2010 17:46:13 +0100
changeset 39 cdb163c0843f
parent 35 2905910218db
child 41 e73f15023e91
child 43 d1a826faf80b
child 46 78c240f59c9d
Initial contribution of the euart driver by Accenture. Known issues ============ When the FIFO is enabled we seem to get some dropped characters, as a temporary workaround a polling mode is enabled.
omap3530/bld.inf
omap3530/omap3530_drivers/euart/bld.inf
omap3530/omap3530_drivers/euart/euart.cpp
omap3530/omap3530_drivers/euart/euart.h
omap3530/omap3530_drivers/euart/euart.mmp
--- a/omap3530/bld.inf	Tue Apr 20 17:13:01 2010 +0100
+++ b/omap3530/bld.inf	Thu Jul 01 17:46:13 2010 +0100
@@ -32,6 +32,7 @@
 // #include "omap3530_drivers/prm/bld.inf"
 #include "omap3530_drivers/uart/bld.inf"
 #include "omap3530_drivers/usbcc/bld.inf"
+#include "omap3530_drivers/euart/bld.inf"
 #include "shared/monitor/bld.inf"
 #include "shared/mstick/bld.inf"
 #include "shared/serialkeyb/bld.inf"
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/omap3530/omap3530_drivers/euart/bld.inf	Thu Jul 01 17:46:13 2010 +0100
@@ -0,0 +1,7 @@
+// omap3530/omap3530_drivers/euart/bld.inf
+
+PRJ_PLATFORMS
+ARMV5
+
+PRJ_MMPFILES
+euart
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/omap3530/omap3530_drivers/euart/euart.cpp	Thu Jul 01 17:46:13 2010 +0100
@@ -0,0 +1,557 @@
+// This component and the accompanying materials are made available
+// under the terms of the License "Symbian Foundation License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.symbianfoundation.org/legal/sfl-v10.html".
+//
+// Initial Contributors:
+// Accenture
+//
+// Contributors:
+//
+// Description:
+// \sf\adaptation\beagleboard\omap3530\omap3530_drivers\euart\euart.cpp
+// pdd for serial ports
+// assume Modem Control Signals change cause an interrupt
+// 
+//
+
+#include <d32comm.h>
+#include <beagle\variant.h>
+#include "euart.h"
+
+#define TX_POLLING_HACK
+
+_LIT(KPddName,"Comm.Beagle");
+using namespace Omap3530Uart;
+
+DDriverComm::DDriverComm()
+//
+// Constructor
+//
+	{
+	iUnitsMask=0x7;
+	iVersion=TVersion(KCommsMajorVersionNumber,KCommsMinorVersionNumber,KCommsBuildVersionNumber);
+	}
+
+TInt DDriverComm::Install()
+//
+// Install the driver
+//
+	{
+	return SetName(&KPddName);
+	}
+
+void GetTemplateCommsCaps(TDes8 &aCaps, TInt aUnit)
+	{
+	TCommCaps2 capsBuf;
+
+	// Fill in the Caps structure with the relevant information for this Unit, e.g
+	TCommCapsV02 &c=capsBuf();
+	c.iRate=KCapsBps1200|KCapsBps2400|KCapsBps4800|KCapsBps9600|KCapsBps19200|KCapsBps38400|
+			KCapsBps57600|KCapsBps115200|KCapsBps230400|KCapsBps460800|KCapsBps4000000;
+			
+	c.iDataBits=KCapsData5|KCapsData6|KCapsData7|KCapsData8;
+	c.iStopBits=KCapsStop1|KCapsStop2;
+	c.iParity=KCapsParityNone|KCapsParityEven|KCapsParityOdd|KCapsParityMark|KCapsParitySpace;
+	c.iHandshake=0; //(OR in all KCapsObeyXXXSupported, KCapsSendXXXSupported, KCapsFailXXXSupported, KCapsFreeXXXSupported
+				    // as required for this Unit's configuration);.
+	c.iSignals=0;   //(OR in as many KCapsSignalXXXSupported as Modem control signals controllable by this Unit);
+	c.iSIR=0; 		//(0 or OR in as many KCapsSIRXXX as IR bit rates supported);
+	c.iNotificationCaps=0; //(OR in as many KNotifyXXXSupported as notifications supported by this Unit);
+	c.iFifo=0;				//(0 or KCapsHasFifo);
+	c.iRoleCaps=0;			//(0 or KCapsRoleSwitchSupported);
+	c.iFlowControlCaps=0;	//(0 or KCapsFlowControlStatusSupported);
+	/** @see TCommCapsV02 */
+
+	aCaps=capsBuf.Left(Min(capsBuf.Length(),aCaps.MaxLength()));
+	}
+
+void DDriverComm::GetCaps(TDes8 &aDes) const
+//
+// Return the drivers capabilities
+//
+	{
+	GetTemplateCommsCaps(aDes, 0);
+	}
+
+TInt DDriverComm::Create(DBase*& aChannel, TInt aUnit, const TDesC8* anInfo, const TVersion& aVer)
+//
+// Create a driver
+//
+	{
+	DCommBeagle* pD=new DCommBeagle;
+	aChannel=pD;
+	TInt r=KErrNoMemory;
+	if (pD)
+		r=pD->DoCreate(aUnit,anInfo);
+	return r;
+	}
+
+TInt DDriverComm::Validate(TInt aUnit, const TDesC8* /*anInfo*/, const TVersion& aVer)
+//
+//	Validate the requested configuration (Version and Unit)
+//
+	{
+	if ((!Kern::QueryVersionSupported(iVersion,aVer)) || (!Kern::QueryVersionSupported(aVer,TVersion(KMinimumLddMajorVersion,KMinimumLddMinorVersion,KMinimumLddBuild))))
+		return KErrNotSupported;
+		
+	if(aUnit<0 || aUnit >2)
+		return KErrNotSupported;
+		
+	return KErrNone;
+	}
+
+DCommBeagle::DCommBeagle()
+//
+// Constructor
+//
+	{
+	gData=0;
+	iInterruptId=-1;		// -1 means not bound
+	}
+
+DCommBeagle::~DCommBeagle()
+//
+// Destructor
+//
+	{
+	if (iInterruptId>=0)
+		Interrupt::Unbind(iInterruptId);
+	
+	if (iDfcQ)
+		{
+		iDfcQ->Destroy();
+		}
+	}
+
+const TInt KDCommBeagleDfcThreadPriority = 24;
+_LIT(KDCommBeagleDfcThread,"DCommBeagleDfcThread");
+
+TInt DCommBeagle::DoCreate(TInt aUnit, const TDesC8* /*anInfo*/)
+//
+// Sets up the PDD
+//
+	{
+	iUnit=aUnit;
+
+	//  Create own DFC queue
+	TInt r = Kern::DynamicDfcQCreate(iDfcQ, KDCommBeagleDfcThreadPriority, KDCommBeagleDfcThread);
+
+	if (r != KErrNone)
+		return r; 	
+
+	// Set iPortAddr and irq with the Linear Base address of the UART and the Interrupt ID coresponding to aUnit
+	iUart = new TUart((TUartNumber)aUnit);
+	Prcm::SetClockState(iUart->PrcmInterfaceClk(), Prcm::EClkOn);
+	Prcm::SetClockState(iUart->PrcmFunctionClk(), Prcm::EClkOn);
+	
+	// bind to UART interrupt
+	r=Interrupt::Bind(iUart->InterruptId(),Isr,this);
+	if (r==KErrNone)
+		iInterruptId=iUart->InterruptId();
+	return r;
+	}
+
+TDfcQue* DCommBeagle::DfcQ(TInt aUnit)
+//
+// Return the DFC queue to be used for this device
+// For UARTs just use the standard low priority DFC queue
+// For Serial PC cards, use the PC card controller thread for the socket in question.
+//
+	{
+	return aUnit==iUnit ? iDfcQ : NULL;
+	}
+
+TInt DCommBeagle::Start()
+//
+// Start receiving characters
+//
+	{
+	if(iUnit == Kern::SuperPage().iDebugPort)
+		Variant::MarkDebugPortOff();
+	
+	iTransmitting=EFalse;			// if EnableTransmit() called before Start()
+
+	if(iUart==NULL)
+		{
+		return KErrNotReady;
+		}
+	iSignals=Signals();
+	iLdd->UpdateSignals(iSignals);
+
+	Interrupt::Enable(iInterruptId);
+	iUart->EnableInterrupt(TUart::EIntRhr);
+	return KErrNone;
+	}
+
+TBool FinishedTransmitting(TAny* aPtr)
+	{
+	DCommBeagle* self = (DCommBeagle*)aPtr;
+	if(self->iUart==NULL)
+		{
+		return ETrue;
+		}
+		
+	if(!self->iUart->TxFifoEmpty())
+		{
+		return EFalse;
+		}
+	return ETrue;
+	}
+
+void DCommBeagle::Stop(TStopMode aMode)
+//
+// Stop receiving characters
+//
+	{
+	switch (aMode)
+		{
+		case EStopNormal:
+		case EStopPwrDown:
+			iUart->DisableInterrupt(TUart::EIntRhr);
+			iUart->DisableInterrupt(TUart::EIntThr);
+			Interrupt::Disable(iInterruptId);
+			
+			// wait for uart to stop tranmitting
+			Kern::PollingWait(FinishedTransmitting,this,3,100);
+			
+			iTransmitting=EFalse;
+			
+			iUart->Disable();			
+			Prcm::SetClockState(iUart->PrcmFunctionClk(), Prcm::EClkOff);
+			break;
+		case  EStopEmergency:
+			iUart->DisableInterrupt(TUart::EIntRhr);			
+			iUart->DisableInterrupt(TUart::EIntThr);
+			Interrupt::Disable(iInterruptId);
+			iTransmitting=EFalse;
+			break;
+		}
+	}
+
+void DCommBeagle::Break(TBool aState)
+//
+// Start or stop the uart breaking
+//
+	{
+	if (aState)
+		{
+		//
+		// TO DO: (mandatory)
+		//
+		// Enable sending a Break (space) condition
+		//
+		}
+	else
+		{
+		//
+		// TO DO: (mandatory)
+		//
+		// Stop sending a Break (space) condition
+		//
+		}
+	}
+
+void DCommBeagle::EnableTransmit()
+//
+// Start sending characters.
+//
+	{
+	TBool tx=(TBool)NKern::SafeSwap((TAny*)ETrue,(TAny*&)iTransmitting);
+	if (tx)
+		{
+		return;
+		}
+	TInt r = 0;
+	#ifdef TX_POLLING_HACK
+	while (Kern::PowerGood())
+	#else
+	while (Kern::PowerGood() && !iUart->TxFifoFull())
+	#endif
+		{	
+		r=TransmitIsr();
+		if(r<0)
+			{
+			//no more to send
+			iTransmitting=EFalse;
+			break;
+			}
+		#ifdef TX_POLLING_HACK
+		while(iUart->TxFifoFull());
+		#endif
+		iUart->Write(r);
+		}
+	TInt irq=0;
+	if (!iInInterrupt)					// CheckTxBuffer adds a Dfc: can only run from ISR or with NKernel locked
+		{
+		NKern::Lock();
+		irq=NKern::DisableAllInterrupts();
+		}
+	CheckTxBuffer();
+	if (!iInInterrupt)
+		{
+		NKern::RestoreInterrupts(irq);
+		NKern::Unlock();
+		}
+	if (r>=0)											// only enable interrupt if there's more data to send
+		{
+		iUart->EnableInterrupt(TUart::EIntThr);
+		}
+	}
+
+TUint DCommBeagle::Signals() const
+//
+// Read and translate the modem lines
+//
+	{
+	TUint signals=0;
+	//
+	// TO DO: (mandatory)
+	//
+	// If the UART corresponding to iUnit supports Modem Control Signals, read them and return a bitmask with one or 
+	// more of the following OR-ed in:
+	// - KSignalDTR,
+	// - KSignalRTS,
+	// - KSignalDSR,
+	// - KSignalCTS,
+	// - KSignalDCD.
+	// 
+	return signals;
+	}
+
+void DCommBeagle::SetSignals(TUint aSetMask, TUint aClearMask)
+//
+// Set signals.
+//
+	{
+	//
+	// TO DO: (mandatory)
+	//
+	// If the UART corresponding to iUnit supports Modem Control Signals, converts the flags in aSetMask and aClearMask 
+	// into hardware-specific bitmasks to write to the UART modem/handshake output register(s). 
+	// aSetMask, aClearMask will have one or more of the following OR-ed in:
+	// - KSignalDTR,
+	// - KSignalRTS,
+	//
+	}
+
+TInt DCommBeagle::ValidateConfig(const TCommConfigV01 &aConfig) const
+//
+// Check a config structure.
+//
+	{
+	//
+	// TO DO: (mandatory)
+	//
+	// Checks the the options in aConfig are supported by the UART corresponding to iUnit
+	// May need to check:
+	//  - aConfig.iParity (contains one of EParityXXX)
+	/** @see TParity */
+	//  - aConfig.iRate (contains one of EBpsXXX)
+	/** @see TBps */
+	//  - aConfig.iDataBits (contains one of EDataXXX)
+	/** @see TDataBits */
+	//  - aConfig.iStopBits (contains one of EStopXXX)
+	/** @see TDataBits */
+	//  - aConfig.iHandshake (contains one of KConfigObeyXXX or KConfigSendXXX or KConfigFailXXX or KConfigFreeXXX)
+	//  - aConfig.iParityError (contains KConfigParityErrorFail or KConfigParityErrorIgnore or KConfigParityErrorReplaceChar)
+	//  - aConfig.iFifo (contains ether EFifoEnable or EFifoDisable)
+	/** @see TFifo */
+	//  - aConfig.iSpecialRate (may contain a rate not listed under TBps)
+	//  - aConfig.iTerminatorCount (conatains number of special characters used as terminators)
+	//  - aConfig.iTerminator[] (contains a list of special characters which can be used as terminators)
+	//  - aConfig.iXonChar (contains the character used as XON - software flow control)
+	//  - aConfig.iXoffChar (contains the character used as XOFF - software flow control)
+	//  - aConfig.iParityErrorChar (contains the character used to replace bytes received with a parity error)
+	//  - aConfig.iSIREnable (contains either ESIREnable or ESIRDisable)
+	/** @see TSir */
+	//  - aConfig.iSIRSettings (contains one of KConfigSIRXXX)
+	// and returns KErrNotSupported if the UART corresponding to iUnit does not support this configuration
+	//
+	return KErrNone;
+	}
+
+void DCommBeagle::CheckConfig(TCommConfigV01& aConfig)
+	{
+	//
+	// TO DO: (optional)
+	//
+	// Validates the default configuration that is defined when a channel is first opened
+	//
+	}
+
+TInt DCommBeagle::DisableIrqs()
+//
+// Disable normal interrupts
+//
+	{
+	
+	return NKern::DisableInterrupts(1);
+	}
+
+void DCommBeagle::RestoreIrqs(TInt aLevel)
+//
+// Restore normal interrupts
+//
+	{
+	
+	NKern::RestoreInterrupts(aLevel);
+	}
+
+void DCommBeagle::Configure(TCommConfigV01 &aConfig)
+//
+// Configure the UART from aConfig
+//
+	{
+	Kern::PollingWait(FinishedTransmitting,this,3,100);	// wait for uart to stop tranmitting
+	iUart->Disable();
+	
+	iUart->Init();
+	iUart->DefineMode(TUart::EUart);
+
+	switch(aConfig.iRate)
+		{
+		case EBps1200:
+			iUart->SetBaud(TUart::E1200);
+			break;
+		case EBps2400:
+			iUart->SetBaud(TUart::E2400);
+			break;
+		case EBps4800:
+			iUart->SetBaud(TUart::E4800);
+			break;
+		case EBps9600:
+			iUart->SetBaud(TUart::E9600);
+			break;
+		case EBps19200:
+			iUart->SetBaud(TUart::E19200);
+			break;
+		case EBps38400:
+			iUart->SetBaud(TUart::E38400);
+			break;
+		case EBps57600:
+			iUart->SetBaud(TUart::E57600);
+			break;
+		case EBps460800:
+			iUart->SetBaud(TUart::E460800);
+			break;
+		case EBps115200:
+		default:
+			iUart->SetBaud(TUart::E115200);
+		}
+	
+	TUart::TDataBits databits = (TUart::TDataBits)aConfig.iDataBits;
+	TUart::TStopBits stopbits;
+	switch(aConfig.iStopBits)
+		{
+		case EStop2:
+			stopbits=TUart::E2Stop;
+			break;
+		case EStop1:
+		default:
+			stopbits=TUart::E1Stop;		
+		}
+
+	TUart::TParity parity;	
+	switch(aConfig.iParity)
+		{
+		case EParityEven:
+			parity=TUart::EEven;
+			break;
+		case EParityOdd:
+			parity=TUart::EOdd;
+			break;
+		case EParityMark:
+			parity=TUart::EMark;
+			break;
+		case EParitySpace:
+			parity=TUart::ESpace;
+			break;
+		case EParityNone:
+		default:
+			parity=TUart::ENone;
+		}
+
+	iUart->SetDataFormat(databits, stopbits, parity);
+	iUart->EnableFifo(TUart::EEnabled, TUart::ETrigger8, TUart::ETrigger8);
+
+	iUart->Enable();
+	}
+
+void DCommBeagle::Caps(TDes8 &aCaps) const
+//
+// return our caps
+//
+	{
+	GetTemplateCommsCaps(aCaps,iUnit);
+	}
+
+void DCommBeagle::Isr(TAny* aPtr)
+//
+// Service the UART interrupt
+//
+	{
+	DCommBeagle& d=*(DCommBeagle*)aPtr;
+	d.iInInterrupt=1;										// going in...
+	TUint xon=d.iLdd->iRxXonChar;
+	TUint xoff=d.iLdd->iRxXoffChar;
+
+	// Read the interrupt source register to determine if it is a Receive, Transmit or Modem Signals change interrupt.
+	// If required also, clear interrupts at the source.
+	// Then process the interrupt condition as in the following pseudo-code extract:
+	//
+	TUint interruptId = IIR::iMem.Read(*(d.iUart));
+	TUint interruptEn = IER::iMem.Read(*(d.iUart));	
+	
+	if((interruptId & IIR::IT_TYPE::ETHR) && (interruptEn & IER::THR_IT::KMask) )
+		{
+		while(Kern::PowerGood() && !d.iUart->TxFifoFull())	
+			{
+			TInt r=d.TransmitIsr();
+			if(r<0)
+				{
+				// Disable the Transmit Interrupt in Hardware
+				d.iUart->DisableInterrupt(TUart::EIntThr);
+				d.iTransmitting=EFalse;
+				break;
+				}
+			d.iUart->Write(r);
+			}
+		d.CheckTxBuffer();
+		}
+		
+	if((interruptId & IIR::IT_TYPE::ERHR) && (interruptEn & IER::RHR_IT::KMask) )
+		{
+		TUint rx[32];
+		TInt rxi=0;
+		TInt x=0;
+
+		while(!d.iUart->RxFifoEmpty() && rxi<32)
+			{
+			TUint ch = d.iUart->Read();
+			if (ch==xon)
+				x=1;
+			else if (ch==xoff)
+				x=-1;
+			else
+				rx[rxi++]=ch;
+			}
+		d.ReceiveIsr(rx,rxi,x);
+		}
+
+	if((interruptId & IIR::IT_TYPE::EModem) && (interruptEn & IER::MODEM_STS_IT::KMask) )
+		{
+		TUint signals=d.Signals()&KDTEInputSignals;
+		if (signals != d.iSignals)
+			{
+			d.iSignals=signals;
+			d.iLdd->StateIsr(signals);
+			}
+		}
+	d.iInInterrupt=0;										// going out...
+	}
+
+DECLARE_STANDARD_PDD()
+	{
+	return new DDriverComm;
+	}
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/omap3530/omap3530_drivers/euart/euart.h	Thu Jul 01 17:46:13 2010 +0100
@@ -0,0 +1,71 @@
+/*
+* This component and the accompanying materials are made available
+* under the terms of the License "Eclipse Public License v1.0"
+* which accompanies this distribution, and is available
+* at the URL "http://www.eclipse.org/legal/epl-v10.html".
+*
+* Initial Contributors:
+* Accenture
+*
+* Contributors:
+*
+* Description: Minimalistic serial driver
+*
+*/
+
+#ifndef _BEAGLE_SERIAL_H
+#define _BEAGLE_SERIAL_H
+
+#include <comm.h>
+#include <e32hal.h>
+#include <omap3530_prcm.h>
+#include <omap3530_uart.h>
+
+const TInt KMinimumLddMajorVersion=1;
+const TInt KMinimumLddMinorVersion=1;
+const TInt KMinimumLddBuild=122;
+
+class DDriverComm : public DPhysicalDevice
+	{
+public:
+	DDriverComm();
+	virtual TInt Install();
+	virtual void GetCaps(TDes8 &aDes) const;
+	virtual TInt Create(DBase*& aChannel, TInt aUnit, const TDesC8* anInfo, const TVersion &aVer);
+	virtual TInt Validate(TInt aUnit, const TDesC8* anInfo, const TVersion &aVer);
+	};
+
+class DCommBeagle : public DComm
+	{
+public:
+	DCommBeagle();
+	~DCommBeagle();
+	TInt DoCreate(TInt aUnit, const TDesC8* anInfo);
+public:
+	virtual TInt Start();
+	virtual void Stop(TStopMode aMode);
+	virtual void Break(TBool aState);
+	virtual void EnableTransmit();
+	virtual TUint Signals() const;
+	virtual void SetSignals(TUint aSetMask,TUint aClearMask);
+	virtual TInt ValidateConfig(const TCommConfigV01 &aConfig) const;
+	virtual void Configure(TCommConfigV01 &aConfig);
+	virtual void Caps(TDes8 &aCaps) const;
+	virtual TInt DisableIrqs();
+	virtual void RestoreIrqs(TInt aIrq);
+	virtual TDfcQue* DfcQ(TInt aUnit);
+	virtual void CheckConfig(TCommConfigV01& aConfig);
+public:
+	static void Isr(TAny* aPtr);
+public:
+	TInt iInterruptId;
+	TInt iUnit;
+	TLinAddr iPortAddr;
+	TInt iInInterrupt;
+	TUint iSignals;
+	TDynamicDfcQue*	iDfcQ;
+	Omap3530Uart::TUart*	iUart;
+	TInt gData;
+	};
+
+#endif
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/omap3530/omap3530_drivers/euart/euart.mmp	Thu Jul 01 17:46:13 2010 +0100
@@ -0,0 +1,37 @@
+// This component and the accompanying materials are made available
+// under the terms of the License "Symbian Foundation License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.symbianfoundation.org/legal/sfl-v10.html".
+//
+// Initial Contributors:
+// Accenture
+//
+// Contributors:
+//
+// Description:
+// omap3530\omap3530_drivers\euart\euart.mmp
+// 
+//
+
+#include "beagle/variant.mmh"
+#include <assp/omap3530_assp/assp.mmh>
+#include "kernel/kern_ext.mmh"
+
+target				AsspTarget(euart,pdd)
+targettype			pdd
+romtarget			euart.pdd
+
+systeminclude		.
+systeminclude		+/include/assp/omap3530_assp
+systeminclude		+/include/platform/drivers
+
+sourcepath 			.
+source				euart.cpp
+
+library				AsspTarget(kaomap3530,lib) AsspTarget(uart,lib) VariantTarget(ecust,lib) AsspTarget(prcm,lib)
+
+uid					0 0x1000015b
+
+VENDORID 0x70000001
+
+capability			all