#ifndef QEMU_H

#define QEMU_H

#include <signal.h>

#include <string.h>

#include "cpu.h"

#undef DEBUG_REMAP

#ifdef DEBUG_REMAP

#include <stdlib.h>

#endif /* DEBUG_REMAP */

#include "qemu-types.h"

#include "thunk.h"

#include "syscall_defs.h"

#include "syscall.h"

#include "target_signal.h"

#include "gdbstub.h"

#if defined(USE_NPTL)

#define THREAD __thread

#else

#define THREAD

#endif

/* This struct is used to hold certain information about the image.

 * Basically, it replicates in user space what would be certain

 * task_struct fields in the kernel

 */

struct image_info {

        abi_ulong       load_addr;

        abi_ulong       start_code;

        abi_ulong       end_code;

        abi_ulong       start_data;

        abi_ulong       end_data;

        abi_ulong       start_brk;

        abi_ulong       brk;

        abi_ulong       start_mmap;

        abi_ulong       mmap;

        abi_ulong       rss;

        abi_ulong       start_stack;

        abi_ulong       stack_base;

        abi_ulong       entry;

        abi_ulong       code_offset;

        abi_ulong       data_offset;

        uint32_t        elf_flags;

        char            **host_argv;

	int		personality;

};

#ifdef TARGET_I386

/* Information about the current linux thread */

struct vm86_saved_state {

    uint32_t eax; /* return code */

    uint32_t ebx;

    uint32_t ecx;

    uint32_t edx;

    uint32_t esi;

    uint32_t edi;

    uint32_t ebp;

    uint32_t esp;

    uint32_t eflags;

    uint32_t eip;

    uint16_t cs, ss, ds, es, fs, gs;

};

#endif

#ifdef TARGET_ARM

/* FPU emulator */

#include "nwfpe/fpa11.h"

#endif

#define MAX_SIGQUEUE_SIZE 1024

struct sigqueue {

    struct sigqueue *next;

    target_siginfo_t info;

};

struct emulated_sigtable {

    int pending; /* true if signal is pending */

    struct sigqueue *first;

    struct sigqueue info; /* in order to always have memory for the

                             first signal, we put it here */

};

/* NOTE: we force a big alignment so that the stack stored after is

   aligned too */

typedef struct TaskState {

    struct TaskState *next;

#ifdef TARGET_ARM

    /* FPA state */

    FPA11 fpa;

    int swi_errno;

#endif

#if defined(TARGET_I386) && !defined(TARGET_X86_64)

    abi_ulong target_v86;

    struct vm86_saved_state vm86_saved_regs;

    struct target_vm86plus_struct vm86plus;

    uint32_t v86flags;

    uint32_t v86mask;

#endif

#ifdef USE_NPTL

    uint32_t *child_tidptr;

#endif

#ifdef TARGET_M68K

    int sim_syscalls;

#endif

#if defined(TARGET_ARM) || defined(TARGET_M68K)

    /* Extra fields for semihosted binaries.  */

    uint32_t stack_base;

    uint32_t heap_base;

    uint32_t heap_limit;

#endif

    int used; /* non zero if used */

    struct image_info *info;

    struct emulated_sigtable sigtab[TARGET_NSIG];

    struct sigqueue sigqueue_table[MAX_SIGQUEUE_SIZE]; /* siginfo queue */

    struct sigqueue *first_free; /* first free siginfo queue entry */

    int signal_pending; /* non zero if a signal may be pending */

    uint8_t stack[0];

} __attribute__((aligned(16))) TaskState;

void init_task_state(TaskState *ts);

extern const char *qemu_uname_release;

extern int show_missing_syscalls;

extern int gdb_wrapper;

/* ??? See if we can avoid exposing so much of the loader internals.  */

/*

 * MAX_ARG_PAGES defines the number of pages allocated for arguments

 * and envelope for the new program. 32 should suffice, this gives

 * a maximum env+arg of 128kB w/4KB pages!

 */

#define MAX_ARG_PAGES 32

extern unsigned long x86_stack_size;

/*

 * This structure is used to hold the arguments that are

 * used when loading binaries.

 */

struct linux_binprm {

        char buf[128];

        void *page[MAX_ARG_PAGES];

        abi_ulong p;

	int fd;

        int e_uid, e_gid;

        int argc, envc;

        char **argv;

        char **envp;

        char * filename;        /* Name of binary */

};

void do_init_thread(struct target_pt_regs *regs, struct image_info *infop);

abi_ulong loader_build_argptr(int envc, int argc, abi_ulong sp,

                              abi_ulong stringp, int push_ptr);

int loader_exec(const char * filename, char ** argv, char ** envp,

             struct target_pt_regs * regs, struct image_info *infop);

int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,

                    struct image_info * info);

int load_flt_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,

                    struct image_info * info);

#ifdef TARGET_HAS_ELFLOAD32

int load_elf_binary_multi(struct linux_binprm *bprm,

                          struct target_pt_regs *regs,

                          struct image_info *info);

#endif

abi_long memcpy_to_target(abi_ulong dest, const void *src,

                          unsigned long len);

void target_set_brk(abi_ulong new_brk);

abi_long do_brk(abi_ulong new_brk);

void syscall_init(void);

abi_long do_syscall(void *cpu_env, int num, abi_long arg1,

                    abi_long arg2, abi_long arg3, abi_long arg4,

                    abi_long arg5, abi_long arg6);

void gemu_log(const char *fmt, ...) __attribute__((format(printf,1,2)));

extern THREAD CPUState *thread_env;

void cpu_loop(CPUState *env);

void init_paths(const char *prefix);

const char *path(const char *pathname);

char *target_strerror(int err);

int get_osversion(void);

void fork_start(void);

void fork_end(int child);

#include "qemu-log.h"

/* strace.c */

void print_syscall(int num,

                   abi_long arg1, abi_long arg2, abi_long arg3,

                   abi_long arg4, abi_long arg5, abi_long arg6);

void print_syscall_ret(int num, abi_long arg1);

extern int do_strace;

/* signal.c */

void process_pending_signals(CPUState *cpu_env);

void signal_init(void);

int queue_signal(CPUState *env, int sig, target_siginfo_t *info);

void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info);

void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo);

int target_to_host_signal(int sig);

long do_sigreturn(CPUState *env);

long do_rt_sigreturn(CPUState *env);

abi_long do_sigaltstack(abi_ulong uss_addr, abi_ulong uoss_addr, abi_ulong sp);

#ifdef TARGET_I386

/* vm86.c */

void save_v86_state(CPUX86State *env);

void handle_vm86_trap(CPUX86State *env, int trapno);

void handle_vm86_fault(CPUX86State *env);

int do_vm86(CPUX86State *env, long subfunction, abi_ulong v86_addr);

#elif defined(TARGET_SPARC64)

void sparc64_set_context(CPUSPARCState *env);

void sparc64_get_context(CPUSPARCState *env);

#endif

/* mmap.c */

int target_mprotect(abi_ulong start, abi_ulong len, int prot);

abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,

                     int flags, int fd, abi_ulong offset);

int target_munmap(abi_ulong start, abi_ulong len);

abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,

                       abi_ulong new_size, unsigned long flags,

                       abi_ulong new_addr);

int target_msync(abi_ulong start, abi_ulong len, int flags);

extern unsigned long last_brk;

void mmap_lock(void);

void mmap_unlock(void);

#if defined(USE_NPTL)

void mmap_fork_start(void);

void mmap_fork_end(int child);

#endif

/* main.c */

extern unsigned long x86_stack_size;

/* user access */

#define VERIFY_READ 0

#define VERIFY_WRITE 1 /* implies read access */

static inline int access_ok(int type, abi_ulong addr, abi_ulong size)

{

    return page_check_range((target_ulong)addr, size,

                            (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0;

}

/* NOTE __get_user and __put_user use host pointers and don't check access. */

/* These are usually used to access struct data members once the

 * struct has been locked - usually with lock_user_struct().

 */

#define __put_user(x, hptr)\

({\

    int size = sizeof(*hptr);\

    switch(size) {\

    case 1:\

        *(uint8_t *)(hptr) = (uint8_t)(typeof(*hptr))(x);\

        break;\

    case 2:\

        *(uint16_t *)(hptr) = tswap16((typeof(*hptr))(x));\

        break;\

    case 4:\

        *(uint32_t *)(hptr) = tswap32((typeof(*hptr))(x));\

        break;\

    case 8:\

        *(uint64_t *)(hptr) = tswap64((typeof(*hptr))(x));\

        break;\

    default:\

        abort();\

    }\

    0;\

})

#define __get_user(x, hptr) \

({\

    int size = sizeof(*hptr);\

    switch(size) {\

    case 1:\

        x = (typeof(*hptr))*(uint8_t *)(hptr);\

        break;\

    case 2:\

        x = (typeof(*hptr))tswap16(*(uint16_t *)(hptr));\

        break;\

    case 4:\

        x = (typeof(*hptr))tswap32(*(uint32_t *)(hptr));\

        break;\

    case 8:\

        x = (typeof(*hptr))tswap64(*(uint64_t *)(hptr));\

        break;\

    default:\

        /* avoid warning */\

        x = 0;\

        abort();\

    }\

    0;\

})

/* put_user()/get_user() take a guest address and check access */

/* These are usually used to access an atomic data type, such as an int,

 * that has been passed by address.  These internally perform locking

 * and unlocking on the data type.

 */

#define put_user(x, gaddr, target_type)					\

({									\

    abi_ulong __gaddr = (gaddr);					\

    target_type *__hptr;						\

    abi_long __ret;							\

    if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \

        __ret = __put_user((x), __hptr);				\

        unlock_user(__hptr, __gaddr, sizeof(target_type));		\

    } else								\

        __ret = -TARGET_EFAULT;						\

    __ret;								\

})

#define get_user(x, gaddr, target_type)					\

({									\

    abi_ulong __gaddr = (gaddr);					\

    target_type *__hptr;						\

    abi_long __ret;							\

    if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \

        __ret = __get_user((x), __hptr);				\

        unlock_user(__hptr, __gaddr, 0);				\

    } else {								\

        /* avoid warning */						\

        (x) = 0;							\

        __ret = -TARGET_EFAULT;						\

    }									\

    __ret;								\

})

#define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong)

#define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long)

#define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t)

#define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t)

#define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t)

#define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t)

#define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t)

#define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t)

#define put_user_u8(x, gaddr)  put_user((x), (gaddr), uint8_t)

#define put_user_s8(x, gaddr)  put_user((x), (gaddr), int8_t)

#define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong)

#define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long)

#define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t)

#define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t)

#define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t)

#define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t)

#define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t)

#define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t)

#define get_user_u8(x, gaddr)  get_user((x), (gaddr), uint8_t)

#define get_user_s8(x, gaddr)  get_user((x), (gaddr), int8_t)

/* copy_from_user() and copy_to_user() are usually used to copy data

 * buffers between the target and host.  These internally perform

 * locking/unlocking of the memory.

 */

abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len);

abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len);

/* Functions for accessing guest memory.  The tget and tput functions

   read/write single values, byteswapping as neccessary.  The lock_user

   gets a pointer to a contiguous area of guest memory, but does not perform

   and byteswapping.  lock_user may return either a pointer to the guest

   memory, or a temporary buffer.  */

/* Lock an area of guest memory into the host.  If copy is true then the

   host area will have the same contents as the guest.  */

static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy)

{

    if (!access_ok(type, guest_addr, len))

        return NULL;

#ifdef DEBUG_REMAP

    {

        void *addr;

        addr = malloc(len);

        if (copy)

            memcpy(addr, g2h(guest_addr), len);

        else

            memset(addr, 0, len);

        return addr;

    }

#else

    return g2h(guest_addr);

#endif

}

/* Unlock an area of guest memory.  The first LEN bytes must be

   flushed back to guest memory. host_ptr = NULL is explicitly

   allowed and does nothing. */

static inline void unlock_user(void *host_ptr, abi_ulong guest_addr,

                               long len)

{

#ifdef DEBUG_REMAP

    if (!host_ptr)

        return;

    if (host_ptr == g2h(guest_addr))

        return;

    if (len > 0)

        memcpy(g2h(guest_addr), host_ptr, len);

    free(host_ptr);

#endif

}

/* Return the length of a string in target memory or -TARGET_EFAULT if

   access error. */

abi_long target_strlen(abi_ulong gaddr);

/* Like lock_user but for null terminated strings.  */

static inline void *lock_user_string(abi_ulong guest_addr)

{

    abi_long len;

    len = target_strlen(guest_addr);

    if (len < 0)

        return NULL;

    return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1);

}

/* Helper macros for locking/ulocking a target struct.  */

#define lock_user_struct(type, host_ptr, guest_addr, copy)	\

    (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy))

#define unlock_user_struct(host_ptr, guest_addr, copy)		\

    unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)

#if defined(USE_NPTL)

#include <pthread.h>

#endif

#endif /* QEMU_H */