MCL/sf/adapt/qemu: comparison symbian-qemu-0.9.1-12/python-2.6.1/Doc/c-api/init.rst

equal deleted inserted replaced

-:ffa851df0825
+:2fb8b9db1c86
+.. highlightlang:: c
+.. _initialization:
+*****************************************
+Initialization, Finalization, and Threads
+*****************************************
+.. cfunction:: void Py_Initialize()
+.. index::
+single: Py_SetProgramName()
+single: PyEval_InitThreads()
+single: PyEval_ReleaseLock()
+single: PyEval_AcquireLock()
+single: modules (in module sys)
+single: path (in module sys)
+module: __builtin__
+module: __main__
+module: sys
+triple: module; search; path
+single: PySys_SetArgv()
+single: Py_Finalize()
+Initialize the Python interpreter.  In an application embedding  Python, this
+should be called before using any other Python/C API functions; with the
+exception of :cfunc:`Py_SetProgramName`, :cfunc:`PyEval_InitThreads`,
+:cfunc:`PyEval_ReleaseLock`, and :cfunc:`PyEval_AcquireLock`. This initializes
+the table of loaded modules (``sys.modules``), and creates the fundamental
+modules :mod:`__builtin__`, :mod:`__main__` and :mod:`sys`.  It also initializes
+the module search path (``sys.path``). It does not set ``sys.argv``; use
+:cfunc:`PySys_SetArgv` for that.  This is a no-op when called for a second time
+(without calling :cfunc:`Py_Finalize` first).  There is no return value; it is a
+fatal error if the initialization fails.
+.. cfunction:: void Py_InitializeEx(int initsigs)
+This function works like :cfunc:`Py_Initialize` if *initsigs* is 1. If
+*initsigs* is 0, it skips initialization registration of signal handlers, which
+might be useful when Python is embedded.
+.. versionadded:: 2.4
+.. cfunction:: int Py_IsInitialized()
+Return true (nonzero) when the Python interpreter has been initialized, false
+(zero) if not.  After :cfunc:`Py_Finalize` is called, this returns false until
+:cfunc:`Py_Initialize` is called again.
+.. cfunction:: void Py_Finalize()
+Undo all initializations made by :cfunc:`Py_Initialize` and subsequent use of
+Python/C API functions, and destroy all sub-interpreters (see
+:cfunc:`Py_NewInterpreter` below) that were created and not yet destroyed since
+the last call to :cfunc:`Py_Initialize`.  Ideally, this frees all memory
+allocated by the Python interpreter.  This is a no-op when called for a second
+time (without calling :cfunc:`Py_Initialize` again first).  There is no return
+value; errors during finalization are ignored.
+This function is provided for a number of reasons.  An embedding application
+might want to restart Python without having to restart the application itself.
+An application that has loaded the Python interpreter from a dynamically
+loadable library (or DLL) might want to free all memory allocated by Python
+before unloading the DLL. During a hunt for memory leaks in an application a
+developer might want to free all memory allocated by Python before exiting from
+the application.
+**Bugs and caveats:** The destruction of modules and objects in modules is done
+in random order; this may cause destructors (:meth:`__del__` methods) to fail
+when they depend on other objects (even functions) or modules.  Dynamically
+loaded extension modules loaded by Python are not unloaded.  Small amounts of
+memory allocated by the Python interpreter may not be freed (if you find a leak,
+please report it).  Memory tied up in circular references between objects is not
+freed.  Some memory allocated by extension modules may not be freed.  Some
+extensions may not work properly if their initialization routine is called more
+than once; this can happen if an application calls :cfunc:`Py_Initialize` and
+:cfunc:`Py_Finalize` more than once.
+.. cfunction:: PyThreadState* Py_NewInterpreter()
+.. index::
+module: __builtin__
+module: __main__
+module: sys
+single: stdout (in module sys)
+single: stderr (in module sys)
+single: stdin (in module sys)
+Create a new sub-interpreter.  This is an (almost) totally separate environment
+for the execution of Python code.  In particular, the new interpreter has
+separate, independent versions of all imported modules, including the
+fundamental modules :mod:`__builtin__`, :mod:`__main__` and :mod:`sys`.  The
+table of loaded modules (``sys.modules``) and the module search path
+(``sys.path``) are also separate.  The new environment has no ``sys.argv``
+variable.  It has new standard I/O stream file objects ``sys.stdin``,
+``sys.stdout`` and ``sys.stderr`` (however these refer to the same underlying
+:ctype:`FILE` structures in the C library).
+The return value points to the first thread state created in the new
+sub-interpreter.  This thread state is made in the current thread state.
+Note that no actual thread is created; see the discussion of thread states
+below.  If creation of the new interpreter is unsuccessful, *NULL* is
+returned; no exception is set since the exception state is stored in the
+current thread state and there may not be a current thread state.  (Like all
+other Python/C API functions, the global interpreter lock must be held before
+calling this function and is still held when it returns; however, unlike most
+other Python/C API functions, there needn't be a current thread state on
+entry.)
+.. index::
+single: Py_Finalize()
+single: Py_Initialize()
+Extension modules are shared between (sub-)interpreters as follows: the first
+time a particular extension is imported, it is initialized normally, and a
+(shallow) copy of its module's dictionary is squirreled away.  When the same
+extension is imported by another (sub-)interpreter, a new module is initialized
+and filled with the contents of this copy; the extension's ``init`` function is
+not called.  Note that this is different from what happens when an extension is
+imported after the interpreter has been completely re-initialized by calling
+:cfunc:`Py_Finalize` and :cfunc:`Py_Initialize`; in that case, the extension's
+``initmodule`` function *is* called again.
+.. index:: single: close() (in module os)
+**Bugs and caveats:** Because sub-interpreters (and the main interpreter) are
+part of the same process, the insulation between them isn't perfect --- for
+example, using low-level file operations like  :func:`os.close` they can
+(accidentally or maliciously) affect each other's open files.  Because of the
+way extensions are shared between (sub-)interpreters, some extensions may not
+work properly; this is especially likely when the extension makes use of
+(static) global variables, or when the extension manipulates its module's
+dictionary after its initialization.  It is possible to insert objects created
+in one sub-interpreter into a namespace of another sub-interpreter; this should
+be done with great care to avoid sharing user-defined functions, methods,
+instances or classes between sub-interpreters, since import operations executed
+by such objects may affect the wrong (sub-)interpreter's dictionary of loaded
+modules.  (XXX This is a hard-to-fix bug that will be addressed in a future
+release.)
+Also note that the use of this functionality is incompatible with extension
+modules such as PyObjC and ctypes that use the :cfunc:`PyGILState_\*` APIs (and
+this is inherent in the way the :cfunc:`PyGILState_\*` functions work).  Simple
+things may work, but confusing behavior will always be near.
+.. cfunction:: void Py_EndInterpreter(PyThreadState *tstate)
+.. index:: single: Py_Finalize()
+Destroy the (sub-)interpreter represented by the given thread state. The given
+thread state must be the current thread state.  See the discussion of thread
+states below.  When the call returns, the current thread state is *NULL*.  All
+thread states associated with this interpreter are destroyed.  (The global
+interpreter lock must be held before calling this function and is still held
+when it returns.)  :cfunc:`Py_Finalize` will destroy all sub-interpreters that
+haven't been explicitly destroyed at that point.
+.. cfunction:: void Py_SetProgramName(char *name)
+.. index::
+single: Py_Initialize()
+single: main()
+single: Py_GetPath()
+This function should be called before :cfunc:`Py_Initialize` is called for
+the first time, if it is called at all.  It tells the interpreter the value
+of the ``argv[0]`` argument to the :cfunc:`main` function of the program.
+This is used by :cfunc:`Py_GetPath` and some other functions below to find
+the Python run-time libraries relative to the interpreter executable.  The
+default value is ``'python'``.  The argument should point to a
+zero-terminated character string in static storage whose contents will not
+change for the duration of the program's execution.  No code in the Python
+interpreter will change the contents of this storage.
+.. cfunction:: char* Py_GetProgramName()
+.. index:: single: Py_SetProgramName()
+Return the program name set with :cfunc:`Py_SetProgramName`, or the default.
+The returned string points into static storage; the caller should not modify its
+value.
+.. cfunction:: char* Py_GetPrefix()
+Return the *prefix* for installed platform-independent files. This is derived
+through a number of complicated rules from the program name set with
+:cfunc:`Py_SetProgramName` and some environment variables; for example, if the
+program name is ``'/usr/local/bin/python'``, the prefix is ``'/usr/local'``. The
+returned string points into static storage; the caller should not modify its
+value.  This corresponds to the :makevar:`prefix` variable in the top-level
+:file:`Makefile` and the :option:`--prefix` argument to the :program:`configure`
+script at build time.  The value is available to Python code as ``sys.prefix``.
+It is only useful on Unix.  See also the next function.
+.. cfunction:: char* Py_GetExecPrefix()
+Return the *exec-prefix* for installed platform-*dependent* files.  This is
+derived through a number of complicated rules from the program name set with
+:cfunc:`Py_SetProgramName` and some environment variables; for example, if the
+program name is ``'/usr/local/bin/python'``, the exec-prefix is
+``'/usr/local'``.  The returned string points into static storage; the caller
+should not modify its value.  This corresponds to the :makevar:`exec_prefix`
+variable in the top-level :file:`Makefile` and the :option:`--exec-prefix`
+argument to the :program:`configure` script at build  time.  The value is
+available to Python code as ``sys.exec_prefix``.  It is only useful on Unix.
+Background: The exec-prefix differs from the prefix when platform dependent
+files (such as executables and shared libraries) are installed in a different
+directory tree.  In a typical installation, platform dependent files may be
+installed in the :file:`/usr/local/plat` subtree while platform independent may
+be installed in :file:`/usr/local`.
+Generally speaking, a platform is a combination of hardware and software
+families, e.g.  Sparc machines running the Solaris 2.x operating system are
+considered the same platform, but Intel machines running Solaris 2.x are another
+platform, and Intel machines running Linux are yet another platform.  Different
+major revisions of the same operating system generally also form different
+platforms.  Non-Unix operating systems are a different story; the installation
+strategies on those systems are so different that the prefix and exec-prefix are
+meaningless, and set to the empty string. Note that compiled Python bytecode
+files are platform independent (but not independent from the Python version by
+which they were compiled!).
+System administrators will know how to configure the :program:`mount` or
+:program:`automount` programs to share :file:`/usr/local` between platforms
+while having :file:`/usr/local/plat` be a different filesystem for each
+platform.
+.. cfunction:: char* Py_GetProgramFullPath()
+.. index::
+single: Py_SetProgramName()
+single: executable (in module sys)
+Return the full program name of the Python executable; this is  computed as a
+side-effect of deriving the default module search path  from the program name
+(set by :cfunc:`Py_SetProgramName` above). The returned string points into
+static storage; the caller should not modify its value.  The value is available
+to Python code as ``sys.executable``.
+.. cfunction:: char* Py_GetPath()
+.. index::
+triple: module; search; path
+single: path (in module sys)
+Return the default module search path; this is computed from the  program name
+(set by :cfunc:`Py_SetProgramName` above) and some environment variables.  The
+returned string consists of a series of directory names separated by a platform
+dependent delimiter character.  The delimiter character is ``':'`` on Unix and
+Mac OS X, ``';'`` on Windows.  The returned string points into static storage;
+the caller should not modify its value.  The value is available to Python code
+as the list ``sys.path``, which may be modified to change the future search path
+for loaded modules.
+.. XXX should give the exact rules
+.. cfunction:: const char* Py_GetVersion()
+Return the version of this Python interpreter.  This is a string that looks
+something like ::
+"1.5 (#67, Dec 31 1997, 22:34:28) [GCC 2.7.2.2]"
+.. index:: single: version (in module sys)
+The first word (up to the first space character) is the current Python version;
+the first three characters are the major and minor version separated by a
+period.  The returned string points into static storage; the caller should not
+modify its value.  The value is available to Python code as ``sys.version``.
+.. cfunction:: const char* Py_GetBuildNumber()
+Return a string representing the Subversion revision that this Python executable
+was built from.  This number is a string because it may contain a trailing 'M'
+if Python was built from a mixed revision source tree.
+.. versionadded:: 2.5
+.. cfunction:: const char* Py_GetPlatform()
+.. index:: single: platform (in module sys)
+Return the platform identifier for the current platform.  On Unix, this is
+formed from the "official" name of the operating system, converted to lower
+case, followed by the major revision number; e.g., for Solaris 2.x, which is
+also known as SunOS 5.x, the value is ``'sunos5'``.  On Mac OS X, it is
+``'darwin'``.  On Windows, it is ``'win'``.  The returned string points into
+static storage; the caller should not modify its value.  The value is available
+to Python code as ``sys.platform``.
+.. cfunction:: const char* Py_GetCopyright()
+Return the official copyright string for the current Python version, for example
+``'Copyright 1991-1995 Stichting Mathematisch Centrum, Amsterdam'``
+.. index:: single: copyright (in module sys)
+The returned string points into static storage; the caller should not modify its
+value.  The value is available to Python code as ``sys.copyright``.
+.. cfunction:: const char* Py_GetCompiler()
+Return an indication of the compiler used to build the current Python version,
+in square brackets, for example::
+"[GCC 2.7.2.2]"
+.. index:: single: version (in module sys)
+The returned string points into static storage; the caller should not modify its
+value.  The value is available to Python code as part of the variable
+``sys.version``.
+.. cfunction:: const char* Py_GetBuildInfo()
+Return information about the sequence number and build date and time  of the
+current Python interpreter instance, for example ::
+"#67, Aug  1 1997, 22:34:28"
+.. index:: single: version (in module sys)
+The returned string points into static storage; the caller should not modify its
+value.  The value is available to Python code as part of the variable
+``sys.version``.
+.. cfunction:: void PySys_SetArgv(int argc, char **argv)
+.. index::
+single: main()
+single: Py_FatalError()
+single: argv (in module sys)
+Set ``sys.argv`` based on *argc* and *argv*.  These parameters are similar to
+those passed to the program's :cfunc:`main` function with the difference that
+the first entry should refer to the script file to be executed rather than the
+executable hosting the Python interpreter.  If there isn't a script that will be
+run, the first entry in *argv* can be an empty string.  If this function fails
+to initialize ``sys.argv``, a fatal condition is signalled using
+:cfunc:`Py_FatalError`.
+.. XXX impl. doesn't seem consistent in allowing 0/NULL for the params;
+check w/ Guido.
+.. _threads:
+Thread State and the Global Interpreter Lock
+============================================
+.. index::
+single: global interpreter lock
+single: interpreter lock
+single: lock, interpreter
+The Python interpreter is not fully thread safe.  In order to support
+multi-threaded Python programs, there's a global lock that must be held by the
+current thread before it can safely access Python objects. Without the lock,
+even the simplest operations could cause problems in a multi-threaded program:
+for example, when two threads simultaneously increment the reference count of
+the same object, the reference count could end up being incremented only once
+instead of twice.
+.. index:: single: setcheckinterval() (in module sys)
+Therefore, the rule exists that only the thread that has acquired the global
+interpreter lock may operate on Python objects or call Python/C API functions.
+In order to support multi-threaded Python programs, the interpreter regularly
+releases and reacquires the lock --- by default, every 100 bytecode instructions
+(this can be changed with  :func:`sys.setcheckinterval`).  The lock is also
+released and reacquired around potentially blocking I/O operations like reading
+or writing a file, so that other threads can run while the thread that requests
+the I/O is waiting for the I/O operation to complete.
+.. index::
+single: PyThreadState
+single: PyThreadState
+The Python interpreter needs to keep some bookkeeping information separate per
+thread --- for this it uses a data structure called :ctype:`PyThreadState`.
+There's one global variable, however: the pointer to the current
+:ctype:`PyThreadState` structure.  While most thread packages have a way to
+store "per-thread global data," Python's internal platform independent thread
+abstraction doesn't support this yet.  Therefore, the current thread state must
+be manipulated explicitly.
+This is easy enough in most cases.  Most code manipulating the global
+interpreter lock has the following simple structure::
+Save the thread state in a local variable.
+Release the interpreter lock.
+...Do some blocking I/O operation...
+Reacquire the interpreter lock.
+Restore the thread state from the local variable.
+This is so common that a pair of macros exists to simplify it::
+Py_BEGIN_ALLOW_THREADS
+...Do some blocking I/O operation...
+Py_END_ALLOW_THREADS
+.. index::
+single: Py_BEGIN_ALLOW_THREADS
+single: Py_END_ALLOW_THREADS
+The :cmacro:`Py_BEGIN_ALLOW_THREADS` macro opens a new block and declares a
+hidden local variable; the :cmacro:`Py_END_ALLOW_THREADS` macro closes the
+block.  Another advantage of using these two macros is that when Python is
+compiled without thread support, they are defined empty, thus saving the thread
+state and lock manipulations.
+When thread support is enabled, the block above expands to the following code::
+PyThreadState *_save;
+_save = PyEval_SaveThread();
+...Do some blocking I/O operation...
+PyEval_RestoreThread(_save);
+Using even lower level primitives, we can get roughly the same effect as
+follows::
+PyThreadState *_save;
+_save = PyThreadState_Swap(NULL);
+PyEval_ReleaseLock();
+...Do some blocking I/O operation...
+PyEval_AcquireLock();
+PyThreadState_Swap(_save);
+.. index::
+single: PyEval_RestoreThread()
+single: errno
+single: PyEval_SaveThread()
+single: PyEval_ReleaseLock()
+single: PyEval_AcquireLock()
+There are some subtle differences; in particular, :cfunc:`PyEval_RestoreThread`
+saves and restores the value of the  global variable :cdata:`errno`, since the
+lock manipulation does not guarantee that :cdata:`errno` is left alone.  Also,
+when thread support is disabled, :cfunc:`PyEval_SaveThread` and
+:cfunc:`PyEval_RestoreThread` don't manipulate the lock; in this case,
+:cfunc:`PyEval_ReleaseLock` and :cfunc:`PyEval_AcquireLock` are not available.
+This is done so that dynamically loaded extensions compiled with thread support
+enabled can be loaded by an interpreter that was compiled with disabled thread
+support.
+The global interpreter lock is used to protect the pointer to the current thread
+state.  When releasing the lock and saving the thread state, the current thread
+state pointer must be retrieved before the lock is released (since another
+thread could immediately acquire the lock and store its own thread state in the
+global variable). Conversely, when acquiring the lock and restoring the thread
+state, the lock must be acquired before storing the thread state pointer.
+Why am I going on with so much detail about this?  Because when threads are
+created from C, they don't have the global interpreter lock, nor is there a
+thread state data structure for them.  Such threads must bootstrap themselves
+into existence, by first creating a thread state data structure, then acquiring
+the lock, and finally storing their thread state pointer, before they can start
+using the Python/C API.  When they are done, they should reset the thread state
+pointer, release the lock, and finally free their thread state data structure.
+Beginning with version 2.3, threads can now take advantage of the
+:cfunc:`PyGILState_\*` functions to do all of the above automatically.  The
+typical idiom for calling into Python from a C thread is now::
+PyGILState_STATE gstate;
+gstate = PyGILState_Ensure();
+/* Perform Python actions here.  */
+result = CallSomeFunction();
+/* evaluate result */
+/* Release the thread. No Python API allowed beyond this point. */
+PyGILState_Release(gstate);
+Note that the :cfunc:`PyGILState_\*` functions assume there is only one global
+interpreter (created automatically by :cfunc:`Py_Initialize`).  Python still
+supports the creation of additional interpreters (using
+:cfunc:`Py_NewInterpreter`), but mixing multiple interpreters and the
+:cfunc:`PyGILState_\*` API is unsupported.
+.. ctype:: PyInterpreterState
+This data structure represents the state shared by a number of cooperating
+threads.  Threads belonging to the same interpreter share their module
+administration and a few other internal items. There are no public members in
+this structure.
+Threads belonging to different interpreters initially share nothing, except
+process state like available memory, open file descriptors and such.  The global
+interpreter lock is also shared by all threads, regardless of to which
+interpreter they belong.
+.. ctype:: PyThreadState
+This data structure represents the state of a single thread.  The only public
+data member is :ctype:`PyInterpreterState \*`:attr:`interp`, which points to
+this thread's interpreter state.
+.. cfunction:: void PyEval_InitThreads()
+.. index::
+single: PyEval_ReleaseLock()
+single: PyEval_ReleaseThread()
+single: PyEval_SaveThread()
+single: PyEval_RestoreThread()
+Initialize and acquire the global interpreter lock.  It should be called in the
+main thread before creating a second thread or engaging in any other thread
+operations such as :cfunc:`PyEval_ReleaseLock` or
+``PyEval_ReleaseThread(tstate)``. It is not needed before calling
+:cfunc:`PyEval_SaveThread` or :cfunc:`PyEval_RestoreThread`.
+.. index:: single: Py_Initialize()
+This is a no-op when called for a second time.  It is safe to call this function
+before calling :cfunc:`Py_Initialize`.
+.. index:: module: thread
+When only the main thread exists, no lock operations are needed. This is a
+common situation (most Python programs do not use threads), and the lock
+operations slow the interpreter down a bit. Therefore, the lock is not created
+initially.  This situation is equivalent to having acquired the lock:  when
+there is only a single thread, all object accesses are safe.  Therefore, when
+this function initializes the lock, it also acquires it.  Before the Python
+:mod:`thread` module creates a new thread, knowing that either it has the lock
+or the lock hasn't been created yet, it calls :cfunc:`PyEval_InitThreads`.  When
+this call returns, it is guaranteed that the lock has been created and that the
+calling thread has acquired it.
+It is **not** safe to call this function when it is unknown which thread (if
+any) currently has the global interpreter lock.
+This function is not available when thread support is disabled at compile time.
+.. cfunction:: int PyEval_ThreadsInitialized()
+Returns a non-zero value if :cfunc:`PyEval_InitThreads` has been called.  This
+function can be called without holding the lock, and therefore can be used to
+avoid calls to the locking API when running single-threaded.  This function is
+not available when thread support is disabled at compile time.
+.. versionadded:: 2.4
+.. cfunction:: void PyEval_AcquireLock()
+Acquire the global interpreter lock.  The lock must have been created earlier.
+If this thread already has the lock, a deadlock ensues.  This function is not
+available when thread support is disabled at compile time.
+.. cfunction:: void PyEval_ReleaseLock()
+Release the global interpreter lock.  The lock must have been created earlier.
+This function is not available when thread support is disabled at compile time.
+.. cfunction:: void PyEval_AcquireThread(PyThreadState *tstate)
+Acquire the global interpreter lock and set the current thread state to
+*tstate*, which should not be *NULL*.  The lock must have been created earlier.
+If this thread already has the lock, deadlock ensues.  This function is not
+available when thread support is disabled at compile time.
+.. cfunction:: void PyEval_ReleaseThread(PyThreadState *tstate)
+Reset the current thread state to *NULL* and release the global interpreter
+lock.  The lock must have been created earlier and must be held by the current
+thread.  The *tstate* argument, which must not be *NULL*, is only used to check
+that it represents the current thread state --- if it isn't, a fatal error is
+reported. This function is not available when thread support is disabled at
+compile time.
+.. cfunction:: PyThreadState* PyEval_SaveThread()
+Release the interpreter lock (if it has been created and thread support is
+enabled) and reset the thread state to *NULL*, returning the previous thread
+state (which is not *NULL*).  If the lock has been created, the current thread
+must have acquired it.  (This function is available even when thread support is
+disabled at compile time.)
+.. cfunction:: void PyEval_RestoreThread(PyThreadState *tstate)
+Acquire the interpreter lock (if it has been created and thread support is
+enabled) and set the thread state to *tstate*, which must not be *NULL*.  If the
+lock has been created, the current thread must not have acquired it, otherwise
+deadlock ensues.  (This function is available even when thread support is
+disabled at compile time.)
+.. cfunction:: void PyEval_ReInitThreads()
+This function is called from :cfunc:`PyOS_AfterFork` to ensure that newly
+created child processes don't hold locks referring to threads which
+are not running in the child process.
+The following macros are normally used without a trailing semicolon; look for
+example usage in the Python source distribution.
+.. cmacro:: Py_BEGIN_ALLOW_THREADS
+This macro expands to ``{ PyThreadState *_save; _save = PyEval_SaveThread();``.
+Note that it contains an opening brace; it must be matched with a following
+:cmacro:`Py_END_ALLOW_THREADS` macro.  See above for further discussion of this
+macro.  It is a no-op when thread support is disabled at compile time.
+.. cmacro:: Py_END_ALLOW_THREADS
+This macro expands to ``PyEval_RestoreThread(_save); }``. Note that it contains
+a closing brace; it must be matched with an earlier
+:cmacro:`Py_BEGIN_ALLOW_THREADS` macro.  See above for further discussion of
+this macro.  It is a no-op when thread support is disabled at compile time.
+.. cmacro:: Py_BLOCK_THREADS
+This macro expands to ``PyEval_RestoreThread(_save);``: it is equivalent to
+:cmacro:`Py_END_ALLOW_THREADS` without the closing brace.  It is a no-op when
+thread support is disabled at compile time.
+.. cmacro:: Py_UNBLOCK_THREADS
+This macro expands to ``_save = PyEval_SaveThread();``: it is equivalent to
+:cmacro:`Py_BEGIN_ALLOW_THREADS` without the opening brace and variable
+declaration.  It is a no-op when thread support is disabled at compile time.
+All of the following functions are only available when thread support is enabled
+at compile time, and must be called only when the interpreter lock has been
+created.
+.. cfunction:: PyInterpreterState* PyInterpreterState_New()
+Create a new interpreter state object.  The interpreter lock need not be held,
+but may be held if it is necessary to serialize calls to this function.
+.. cfunction:: void PyInterpreterState_Clear(PyInterpreterState *interp)
+Reset all information in an interpreter state object.  The interpreter lock must
+be held.
+.. cfunction:: void PyInterpreterState_Delete(PyInterpreterState *interp)
+Destroy an interpreter state object.  The interpreter lock need not be held.
+The interpreter state must have been reset with a previous call to
+:cfunc:`PyInterpreterState_Clear`.
+.. cfunction:: PyThreadState* PyThreadState_New(PyInterpreterState *interp)
+Create a new thread state object belonging to the given interpreter object.  The
+interpreter lock need not be held, but may be held if it is necessary to
+serialize calls to this function.
+.. cfunction:: void PyThreadState_Clear(PyThreadState *tstate)
+Reset all information in a thread state object.  The interpreter lock must be
+held.
+.. cfunction:: void PyThreadState_Delete(PyThreadState *tstate)
+Destroy a thread state object.  The interpreter lock need not be held.  The
+thread state must have been reset with a previous call to
+:cfunc:`PyThreadState_Clear`.
+.. cfunction:: PyThreadState* PyThreadState_Get()
+Return the current thread state.  The interpreter lock must be held.  When the
+current thread state is *NULL*, this issues a fatal error (so that the caller
+needn't check for *NULL*).
+.. cfunction:: PyThreadState* PyThreadState_Swap(PyThreadState *tstate)
+Swap the current thread state with the thread state given by the argument
+*tstate*, which may be *NULL*.  The interpreter lock must be held.
+.. cfunction:: PyObject* PyThreadState_GetDict()
+Return a dictionary in which extensions can store thread-specific state
+information.  Each extension should use a unique key to use to store state in
+the dictionary.  It is okay to call this function when no current thread state
+is available. If this function returns *NULL*, no exception has been raised and
+the caller should assume no current thread state is available.
+.. versionchanged:: 2.3
+Previously this could only be called when a current thread is active, and *NULL*
+meant that an exception was raised.
+.. cfunction:: int PyThreadState_SetAsyncExc(long id, PyObject *exc)
+Asynchronously raise an exception in a thread. The *id* argument is the thread
+id of the target thread; *exc* is the exception object to be raised. This
+function does not steal any references to *exc*. To prevent naive misuse, you
+must write your own C extension to call this.  Must be called with the GIL held.
+Returns the number of thread states modified; this is normally one, but will be
+zero if the thread id isn't found.  If *exc* is :const:`NULL`, the pending
+exception (if any) for the thread is cleared. This raises no exceptions.
+.. versionadded:: 2.3
+.. cfunction:: PyGILState_STATE PyGILState_Ensure()
+Ensure that the current thread is ready to call the Python C API regardless of
+the current state of Python, or of its thread lock. This may be called as many
+times as desired by a thread as long as each call is matched with a call to
+:cfunc:`PyGILState_Release`. In general, other thread-related APIs may be used
+between :cfunc:`PyGILState_Ensure` and :cfunc:`PyGILState_Release` calls as long
+as the thread state is restored to its previous state before the Release().  For
+example, normal usage of the :cmacro:`Py_BEGIN_ALLOW_THREADS` and
+:cmacro:`Py_END_ALLOW_THREADS` macros is acceptable.
+The return value is an opaque "handle" to the thread state when
+:cfunc:`PyGILState_Ensure` was called, and must be passed to
+:cfunc:`PyGILState_Release` to ensure Python is left in the same state. Even
+though recursive calls are allowed, these handles *cannot* be shared - each
+unique call to :cfunc:`PyGILState_Ensure` must save the handle for its call
+to :cfunc:`PyGILState_Release`.
+When the function returns, the current thread will hold the GIL. Failure is a
+fatal error.
+.. versionadded:: 2.3
+.. cfunction:: void PyGILState_Release(PyGILState_STATE)
+Release any resources previously acquired.  After this call, Python's state will
+be the same as it was prior to the corresponding :cfunc:`PyGILState_Ensure` call
+(but generally this state will be unknown to the caller, hence the use of the
+GILState API.)
+Every call to :cfunc:`PyGILState_Ensure` must be matched by a call to
+:cfunc:`PyGILState_Release` on the same thread.
+.. versionadded:: 2.3
+.. _profiling:
+Profiling and Tracing
+=====================
+.. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org>
+The Python interpreter provides some low-level support for attaching profiling
+and execution tracing facilities.  These are used for profiling, debugging, and
+coverage analysis tools.
+Starting with Python 2.2, the implementation of this facility was substantially
+revised, and an interface from C was added.  This C interface allows the
+profiling or tracing code to avoid the overhead of calling through Python-level
+callable objects, making a direct C function call instead.  The essential
+attributes of the facility have not changed; the interface allows trace
+functions to be installed per-thread, and the basic events reported to the trace
+function are the same as had been reported to the Python-level trace functions
+in previous versions.
+.. ctype:: int (*Py_tracefunc)(PyObject *obj, PyFrameObject *frame, int what, PyObject *arg)
+The type of the trace function registered using :cfunc:`PyEval_SetProfile` and
+:cfunc:`PyEval_SetTrace`. The first parameter is the object passed to the
+registration function as *obj*, *frame* is the frame object to which the event
+pertains, *what* is one of the constants :const:`PyTrace_CALL`,
+:const:`PyTrace_EXCEPTION`, :const:`PyTrace_LINE`, :const:`PyTrace_RETURN`,
+:const:`PyTrace_C_CALL`, :const:`PyTrace_C_EXCEPTION`, or
+:const:`PyTrace_C_RETURN`, and *arg* depends on the value of *what*:
++------------------------------+--------------------------------------+
+| Value of *what*              | Meaning of *arg*                     |
++==============================+======================================+
+| :const:`PyTrace_CALL`        | Always *NULL*.                       |
++------------------------------+--------------------------------------+
+| :const:`PyTrace_EXCEPTION`   | Exception information as returned by |
+|                              | :func:`sys.exc_info`.                |
++------------------------------+--------------------------------------+
+| :const:`PyTrace_LINE`        | Always *NULL*.                       |
++------------------------------+--------------------------------------+
+| :const:`PyTrace_RETURN`      | Value being returned to the caller.  |
++------------------------------+--------------------------------------+
+| :const:`PyTrace_C_CALL`      | Name of function being called.       |
++------------------------------+--------------------------------------+
+| :const:`PyTrace_C_EXCEPTION` | Always *NULL*.                       |
++------------------------------+--------------------------------------+
+| :const:`PyTrace_C_RETURN`    | Always *NULL*.                       |
++------------------------------+--------------------------------------+
+.. cvar:: int PyTrace_CALL
+The value of the *what* parameter to a :ctype:`Py_tracefunc` function when a new
+call to a function or method is being reported, or a new entry into a generator.
+Note that the creation of the iterator for a generator function is not reported
+as there is no control transfer to the Python bytecode in the corresponding
+frame.
+.. cvar:: int PyTrace_EXCEPTION
+The value of the *what* parameter to a :ctype:`Py_tracefunc` function when an
+exception has been raised.  The callback function is called with this value for
+*what* when after any bytecode is processed after which the exception becomes
+set within the frame being executed.  The effect of this is that as exception
+propagation causes the Python stack to unwind, the callback is called upon
+return to each frame as the exception propagates.  Only trace functions receives
+these events; they are not needed by the profiler.
+.. cvar:: int PyTrace_LINE
+The value passed as the *what* parameter to a trace function (but not a
+profiling function) when a line-number event is being reported.
+.. cvar:: int PyTrace_RETURN
+The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a
+call is returning without propagating an exception.
+.. cvar:: int PyTrace_C_CALL
+The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
+function is about to be called.
+.. cvar:: int PyTrace_C_EXCEPTION
+The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
+function has thrown an exception.
+.. cvar:: int PyTrace_C_RETURN
+The value for the *what* parameter to :ctype:`Py_tracefunc` functions when a C
+function has returned.
+.. cfunction:: void PyEval_SetProfile(Py_tracefunc func, PyObject *obj)
+Set the profiler function to *func*.  The *obj* parameter is passed to the
+function as its first parameter, and may be any Python object, or *NULL*.  If
+the profile function needs to maintain state, using a different value for *obj*
+for each thread provides a convenient and thread-safe place to store it.  The
+profile function is called for all monitored events except the line-number
+events.
+.. cfunction:: void PyEval_SetTrace(Py_tracefunc func, PyObject *obj)
+Set the tracing function to *func*.  This is similar to
+:cfunc:`PyEval_SetProfile`, except the tracing function does receive line-number
+events.
+.. cfunction:: PyObject* PyEval_GetCallStats(PyObject *self)
+Return a tuple of function call counts.  There are constants defined for the
+positions within the tuple:
++-------------------------------+-------+
+| Name                          | Value |
++===============================+=======+
+| :const:`PCALL_ALL`            | 0     |
++-------------------------------+-------+
+| :const:`PCALL_FUNCTION`       | 1     |
++-------------------------------+-------+
+| :const:`PCALL_FAST_FUNCTION`  | 2     |
++-------------------------------+-------+
+| :const:`PCALL_FASTER_FUNCTION`| 3     |
++-------------------------------+-------+
+| :const:`PCALL_METHOD`         | 4     |
++-------------------------------+-------+
+| :const:`PCALL_BOUND_METHOD`   | 5     |
++-------------------------------+-------+
+| :const:`PCALL_CFUNCTION`      | 6     |
++-------------------------------+-------+
+| :const:`PCALL_TYPE`           | 7     |
++-------------------------------+-------+
+| :const:`PCALL_GENERATOR`      | 8     |
++-------------------------------+-------+
+| :const:`PCALL_OTHER`          | 9     |
++-------------------------------+-------+
+| :const:`PCALL_POP`            | 10    |
++-------------------------------+-------+
+:const:`PCALL_FAST_FUNCTION` means no argument tuple needs to be created.
+:const:`PCALL_FASTER_FUNCTION` means that the fast-path frame setup code is used.
+If there is a method call where the call can be optimized by changing
+the argument tuple and calling the function directly, it gets recorded
+twice.
+This function is only present if Python is compiled with :const:`CALL_PROFILE`
+defined.
+.. _advanced-debugging:
+Advanced Debugger Support
+=========================
+.. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org>
+These functions are only intended to be used by advanced debugging tools.
+.. cfunction:: PyInterpreterState* PyInterpreterState_Head()
+Return the interpreter state object at the head of the list of all such objects.
+.. versionadded:: 2.2
+.. cfunction:: PyInterpreterState* PyInterpreterState_Next(PyInterpreterState *interp)
+Return the next interpreter state object after *interp* from the list of all
+such objects.
+.. versionadded:: 2.2
+.. cfunction:: PyThreadState * PyInterpreterState_ThreadHead(PyInterpreterState *interp)
+Return the a pointer to the first :ctype:`PyThreadState` object in the list of
+threads associated with the interpreter *interp*.
+.. versionadded:: 2.2
+.. cfunction:: PyThreadState* PyThreadState_Next(PyThreadState *tstate)
+Return the next thread state object after *tstate* from the list of all such
+objects belonging to the same :ctype:`PyInterpreterState` object.
+.. versionadded:: 2.2