--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/dtc-trunk/Documentation/dtc-paper.tex Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,597 @@
+\documentclass[a4paper,twocolumn]{article}
+
+\usepackage{abstract}
+\usepackage{xspace}
+\usepackage{amssymb}
+\usepackage{latexsym}
+\usepackage{tabularx}
+\usepackage[T1]{fontenc}
+\usepackage{calc}
+\usepackage{listings}
+\usepackage{color}
+\usepackage{url}
+
+\title{Device trees everywhere}
+
+\author{David Gibson \texttt{<{dwg}{@}{au1.ibm.com}>}\\
+ Benjamin Herrenschmidt \texttt{<{benh}{@}{kernel.crashing.org}>}\\
+ \emph{OzLabs, IBM Linux Technology Center}}
+
+\newcommand{\R}{\textsuperscript{\textregistered}\xspace}
+\newcommand{\tm}{\textsuperscript{\texttrademark}\xspace}
+\newcommand{\tge}{$\geqslant$}
+%\newcommand{\ditto}{\textquotedbl\xspace}
+
+\newcommand{\fixme}[1]{$\bigstar$\emph{\textbf{\large #1}}$\bigstar$\xspace}
+
+\newcommand{\ppc}{\mbox{PowerPC}\xspace}
+\newcommand{\of}{Open Firmware\xspace}
+\newcommand{\benh}{Ben Herrenschmidt\xspace}
+\newcommand{\kexec}{\texttt{kexec()}\xspace}
+\newcommand{\dtbeginnode}{\texttt{OF\_DT\_BEGIN\_NODE\xspace}}
+\newcommand{\dtendnode}{\texttt{OF\_DT\_END\_NODE\xspace}}
+\newcommand{\dtprop}{\texttt{OF\_DT\_PROP\xspace}}
+\newcommand{\dtend}{\texttt{OF\_DT\_END\xspace}}
+\newcommand{\dtc}{\texttt{dtc}\xspace}
+\newcommand{\phandle}{\texttt{linux,phandle}\xspace}
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+ We present a method for booting a \ppc{}\R Linux\R kernel on an
+ embedded machine. To do this, we supply the kernel with a compact
+ flattened-tree representation of the system's hardware based on the
+ device tree supplied by Open Firmware on IBM\R servers and Apple\R
+ Power Macintosh\R machines.
+
+ The ``blob'' representing the device tree can be created using \dtc
+ --- the Device Tree Compiler --- that turns a simple text
+ representation of the tree into the compact representation used by
+ the kernel. The compiler can produce either a binary ``blob'' or an
+ assembler file ready to be built into a firmware or bootwrapper
+ image.
+
+ This flattened-tree approach is now the only supported method of
+ booting a \texttt{ppc64} kernel without Open Firmware, and we plan
+ to make it the only supported method for all \texttt{powerpc}
+ kernels in the future.
+\end{abstract}
+
+\section{Introduction}
+
+\subsection{OF and the device tree}
+
+Historically, ``everyday'' \ppc machines have booted with the help of
+\of (OF), a firmware environment defined by IEEE1275 \cite{IEEE1275}.
+Among other boot-time services, OF maintains a device tree that
+describes all of the system's hardware devices and how they're
+connected. During boot, before taking control of memory management,
+the Linux kernel uses OF calls to scan the device tree and transfer it
+to an internal representation that is used at run time to look up
+various device information.
+
+The device tree consists of nodes representing devices or
+buses\footnote{Well, mostly. There are a few special exceptions.}.
+Each node contains \emph{properties}, name--value pairs that give
+information about the device. The values are arbitrary byte strings,
+and for some properties, they contain tables or other structured
+information.
+
+\subsection{The bad old days}
+
+Embedded systems, by contrast, usually have a minimal firmware that
+might supply a few vital system parameters (size of RAM and the like),
+but nothing as detailed or complete as the OF device tree. This has
+meant that the various 32-bit \ppc embedded ports have required a
+variety of hacks spread across the kernel to deal with the lack of
+device tree. These vary from specialised boot wrappers to parse
+parameters (which are at least reasonably localised) to
+CONFIG-dependent hacks in drivers to override normal probe logic with
+hardcoded addresses for a particular board. As well as being ugly of
+itself, such CONFIG-dependent hacks make it hard to build a single
+kernel image that supports multiple embedded machines.
+
+Until relatively recently, the only 64-bit \ppc machines without OF
+were legacy (pre-POWER5\R) iSeries\R machines. iSeries machines often
+only have virtual IO devices, which makes it quite simple to work
+around the lack of a device tree. Even so, the lack means the iSeries
+boot sequence must be quite different from the pSeries or Macintosh,
+which is not ideal.
+
+The device tree also presents a problem for implementing \kexec. When
+the kernel boots, it takes over full control of the system from OF,
+even re-using OF's memory. So, when \kexec comes to boot another
+kernel, OF is no longer around for the second kernel to query.
+
+\section{The Flattened Tree}
+
+In May 2005 \benh implemented a new approach to handling the device
+tree that addresses all these problems. When booting on OF systems,
+the first thing the kernel runs is a small piece of code in
+\texttt{prom\_init.c}, which executes in the context of OF. This code
+walks the device tree using OF calls, and transcribes it into a
+compact, flattened format. The resulting device tree ``blob'' is then
+passed to the kernel proper, which eventually unflattens the tree into
+its runtime form. This blob is the only data communicated between the
+\texttt{prom\_init.c} bootstrap and the rest of the kernel.
+
+When OF isn't available, either because the machine doesn't have it at
+all or because \kexec has been used, the kernel instead starts
+directly from the entry point taking a flattened device tree. The
+device tree blob must be passed in from outside, rather than generated
+by part of the kernel from OF. For \kexec, the userland
+\texttt{kexec} tools build the blob from the runtime device tree
+before invoking the new kernel. For embedded systems the blob can
+come either from the embedded bootloader, or from a specialised
+version of the \texttt{zImage} wrapper for the system in question.
+
+\subsection{Properties of the flattened tree}
+
+The flattened tree format should be easy to handle, both for the
+kernel that parses it and the bootloader that generates it. In
+particular, the following properties are desirable:
+
+\begin{itemize}
+\item \emph{relocatable}: the bootloader or kernel should be able to
+ move the blob around as a whole, without needing to parse or adjust
+ its internals. In practice that means we must not use pointers
+ within the blob.
+\item \emph{insert and delete}: sometimes the bootloader might want to
+ make tweaks to the flattened tree, such as deleting or inserting a
+ node (or whole subtree). It should be possible to do this without
+ having to effectively regenerate the whole flattened tree. In
+ practice this means limiting the use of internal offsets in the blob
+ that need recalculation if a section is inserted or removed with
+ \texttt{memmove()}.
+\item \emph{compact}: embedded systems are frequently short of
+ resources, particularly RAM and flash memory space. Thus, the tree
+ representation should be kept as small as conveniently possible.
+\end{itemize}
+
+\subsection{Format of the device tree blob}
+\label{sec:format}
+
+\begin{figure}[htb!]
+ \centering
+ \footnotesize
+ \begin{tabular}{r|c|l}
+ \multicolumn{1}{r}{\textbf{Offset}}& \multicolumn{1}{c}{\textbf{Contents}} \\\cline{2-2}
+ \texttt{0x00} & \texttt{0xd00dfeed} & magic number \\\cline{2-2}
+ \texttt{0x04} & \emph{totalsize} \\\cline{2-2}
+ \texttt{0x08} & \emph{off\_struct} & \\\cline{2-2}
+ \texttt{0x0C} & \emph{off\_strs} & \\\cline{2-2}
+ \texttt{0x10} & \emph{off\_rsvmap} & \\\cline{2-2}
+ \texttt{0x14} & \emph{version} \\\cline{2-2}
+ \texttt{0x18} & \emph{last\_comp\_ver} & \\\cline{2-2}
+ \texttt{0x1C} & \emph{boot\_cpu\_id} & \tge v2 only\\\cline{2-2}
+ \texttt{0x20} & \emph{size\_strs} & \tge v3 only\\\cline{2-2}
+ \multicolumn{1}{r}{\vdots} & \multicolumn{1}{c}{\vdots} & \\\cline{2-2}
+ \emph{off\_rsvmap} & \emph{address0} & memory reserve \\
+ + \texttt{0x04} & ...& table \\\cline{2-2}
+ + \texttt{0x08} & \emph{len0} & \\
+ + \texttt{0x0C} & ...& \\\cline{2-2}
+ \vdots & \multicolumn{1}{c|}{\vdots} & \\\cline{2-2}
+ & \texttt{0x00000000}- & end marker\\
+ & \texttt{00000000} & \\\cline{2-2}
+ & \texttt{0x00000000}- & \\
+ & \texttt{00000000} & \\\cline{2-2}
+ \multicolumn{1}{r}{\vdots} & \multicolumn{1}{c}{\vdots} & \\\cline{2-2}
+ \emph{off\_strs} & \texttt{'n' 'a' 'm' 'e'} & strings block \\
+ + \texttt{0x04} & \texttt{~0~ 'm' 'o' 'd'} & \\
+ + \texttt{0x08} & \texttt{'e' 'l' ~0~ \makebox[\widthof{~~~}]{\textrm{...}}} & \\
+ \vdots & \multicolumn{1}{c|}{\vdots} & \\\cline{2-2}
+ \multicolumn{1}{r}{+ \emph{size\_strs}} \\
+ \multicolumn{1}{r}{\vdots} & \multicolumn{1}{c}{\vdots} & \\\cline{2-2}
+ \emph{off\_struct} & \dtbeginnode & structure block \\\cline{2-2}
+ + \texttt{0x04} & \texttt{'/' ~0~ ~0~ ~0~} & root node\\\cline{2-2}
+ + \texttt{0x08} & \dtprop & \\\cline{2-2}
+ + \texttt{0x0C} & \texttt{0x00000005} & ``\texttt{model}''\\\cline{2-2}
+ + \texttt{0x10} & \texttt{0x00000008} & \\\cline{2-2}
+ + \texttt{0x14} & \texttt{'M' 'y' 'B' 'o'} & \\
+ + \texttt{0x18} & \texttt{'a' 'r' 'd' ~0~} & \\\cline{2-2}
+ \vdots & \multicolumn{1}{c|}{\vdots} & \\\cline{2-2}
+ & \texttt{\dtendnode} \\\cline{2-2}
+ & \texttt{\dtend} \\\cline{2-2}
+ \multicolumn{1}{r}{\vdots} & \multicolumn{1}{c}{\vdots} & \\\cline{2-2}
+ \multicolumn{1}{r}{\emph{totalsize}} \\
+ \end{tabular}
+ \caption{Device tree blob layout}
+ \label{fig:blob-layout}
+\end{figure}
+
+The format for the blob we devised, was first described on the
+\texttt{linuxppc64-dev} mailing list in \cite{noof1}. The format has
+since evolved through various revisions, and the current version is
+included as part of the \dtc (see \S\ref{sec:dtc}) git tree,
+\cite{dtcgit}.
+
+Figure \ref{fig:blob-layout} shows the layout of the blob of data
+containing the device tree. It has three sections of variable size:
+the \emph{memory reserve table}, the \emph{structure block} and the
+\emph{strings block}. A small header gives the blob's size and
+version and the locations of the three sections, plus a handful of
+vital parameters used during early boot.
+
+The memory reserve map section gives a list of regions of memory that
+the kernel must not use\footnote{Usually such ranges contain some data
+structure initialised by the firmware that must be preserved by the
+kernel.}. The list is represented as a simple array of (address,
+size) pairs of 64 bit values, terminated by a zero size entry. The
+strings block is similarly simple, consisting of a number of
+null-terminated strings appended together, which are referenced from
+the structure block as described below.
+
+The structure block contains the device tree proper. Each node is
+introduced with a 32-bit \dtbeginnode tag, followed by the node's name
+as a null-terminated string, padded to a 32-bit boundary. Then
+follows all of the properties of the node, each introduced with a
+\dtprop tag, then all of the node's subnodes, each introduced with
+their own \dtbeginnode tag. The node ends with an \dtendnode tag, and
+after the \dtendnode for the root node is an \dtend tag, indicating
+the end of the whole tree\footnote{This is redundant, but included for
+ease of parsing.}. The structure block starts with the \dtbeginnode
+introducing the description of the root node (named \texttt{/}).
+
+Each property, after the \dtprop, has a 32-bit value giving an offset
+from the beginning of the strings block at which the property name is
+stored. Because it's common for many nodes to have properties with
+the same name, this approach can substantially reduce the total size
+of the blob. The name offset is followed by the length of the
+property value (as a 32-bit value) and then the data itself padded to
+a 32-bit boundary.
+
+\subsection{Contents of the tree}
+\label{sec:treecontents}
+
+Having seen how to represent the device tree structure as a flattened
+blob, what actually goes into the tree? The short answer is ``the
+same as an OF tree''. On OF systems, the flattened tree is
+transcribed directly from the OF device tree, so for simplicity we
+also use OF conventions for the tree on other systems.
+
+In many cases a flat tree can be simpler than a typical OF provided
+device tree. The flattened tree need only provide those nodes and
+properties that the kernel actually requires; the flattened tree
+generally need not include devices that the kernel can probe itself.
+For example, an OF device tree would normally include nodes for each
+PCI device on the system. A flattened tree need only include nodes
+for the PCI host bridges; the kernel will scan the buses thus
+described to find the subsidiary devices. The device tree can include
+nodes for devices where the kernel needs extra information, though:
+for example, for ISA devices on a subsidiary PCI/ISA bridge, or for
+devices with unusual interrupt routing.
+
+Where they exist, we follow the IEEE1275 bindings that specify how to
+describe various buses in the device tree (for example,
+\cite{IEEE1275-pci} describe how to represent PCI devices). The
+standard has not been updated for a long time, however, and lacks
+bindings for many modern buses and devices. In particular, embedded
+specific devices such as the various System-on-Chip buses are not
+covered. We intend to create new bindings for such buses, in keeping
+with the general conventions of IEEE1275 (a simple such binding for a
+System-on-Chip bus was included in \cite{noof5} a revision of
+\cite{noof1}).
+
+One complication arises for representing ``phandles'' in the flattened
+tree. In OF, each node in the tree has an associated phandle, a
+32-bit integer that uniquely identifies the node\footnote{In practice
+usually implemented as a pointer or offset within OF memory.}. This
+handle is used by the various OF calls to query and traverse the tree.
+Sometimes phandles are also used within the tree to refer to other
+nodes in the tree. For example, devices that produce interrupts
+generally have an \texttt{interrupt-parent} property giving the
+phandle of the interrupt controller that handles interrupts from this
+device. Parsing these and other interrupt related properties allows
+the kernel to build a complete representation of the system's
+interrupt tree, which can be quite different from the tree of bus
+connections.
+
+In the flattened tree, a node's phandle is represented by a special
+\phandle property. When the kernel generates a flattened tree from
+OF, it adds a \phandle property to each node, containing the phandle
+retrieved from OF. When the tree is generated without OF, however,
+only nodes that are actually referred to by phandle need to have this
+property.
+
+Another complication arises because nodes in an OF tree have two
+names. First they have the ``unit name'', which is how the node is
+referred to in an OF path. The unit name generally consists of a
+device type followed by an \texttt{@} followed by a \emph{unit
+address}. For example \texttt{/memory@0} is the full path of a memory
+node at address 0, \texttt{/ht@0,f2000000/pci@1} is the path of a PCI
+bus node, which is under a HyperTransport\tm bus node. The form of
+the unit address is bus dependent, but is generally derived from the
+node's \texttt{reg} property. In addition, nodes have a property,
+\texttt{name}, whose value is usually equal to the first path of the
+unit name. For example, the nodes in the previous example would have
+\texttt{name} properties equal to \texttt{memory} and \texttt{pci},
+respectively. To save space in the blob, the current version of the
+flattened tree format only requires the unit names to be present.
+When the kernel unflattens the tree, it automatically generates a
+\texttt{name} property from the node's path name.
+
+\section{The Device Tree Compiler}
+\label{sec:dtc}
+
+\begin{figure}[htb!]
+ \centering
+ \begin{lstlisting}[frame=single,basicstyle=\footnotesize\ttfamily,
+ tabsize=3,numbers=left,xleftmargin=2em]
+/memreserve/ 0x20000000-0x21FFFFFF;
+
+/ {
+ model = "MyBoard";
+ compatible = "MyBoardFamily";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ PowerPC,970@0 {
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <5f5e1000>;
+ timebase-frequency = <1FCA055>;
+ linux,boot-cpu;
+ i-cache-size = <10000>;
+ d-cache-size = <8000>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ memreg: reg = <00000000 00000000
+ 00000000 20000000>;
+ };
+
+ mpic@0x3fffdd08400 {
+ /* Interrupt controller */
+ /* ... */
+ };
+
+ pci@40000000000000 {
+ /* PCI host bridge */
+ /* ... */
+ };
+
+ chosen {
+ bootargs = "root=/dev/sda2";
+ linux,platform = <00000600>;
+ interrupt-controller =
+ < &/mpic@0x3fffdd08400 >;
+ };
+};
+\end{lstlisting}
+ \caption{Example \dtc source}
+ \label{fig:dts}
+\end{figure}
+
+As we've seen, the flattened device tree format provides a convenient
+way of communicating device tree information to the kernel. It's
+simple for the kernel to parse, and simple for bootloaders to
+manipulate. On OF systems, it's easy to generate the flattened tree
+by walking the OF maintained tree. However, for embedded systems, the
+flattened tree must be generated from scratch.
+
+Embedded bootloaders are generally built for a particular board. So,
+it's usually possible to build the device tree blob at compile time
+and include it in the bootloader image. For minor revisions of the
+board, the bootloader can contain code to make the necessary tweaks to
+the tree before passing it to the booted kernel.
+
+The device trees for embedded boards are usually quite simple, and
+it's possible to hand construct the necessary blob by hand, but doing
+so is tedious. The ``device tree compiler'', \dtc{}\footnote{\dtc can
+be obtained from \cite{dtcgit}.}, is designed to make creating device
+tree blobs easier by converting a text representation of the tree
+into the necessary blob.
+
+\subsection{Input and output formats}
+
+As well as the normal mode of compiling a device tree blob from text
+source, \dtc can convert a device tree between a number of
+representations. It can take its input in one of three different
+formats:
+\begin{itemize}
+\item source, the normal case. The device tree is described in a text
+ form, described in \S\ref{sec:dts}.
+\item blob (\texttt{dtb}), the flattened tree format described in
+ \S\ref{sec:format}. This mode is useful for checking a pre-existing
+ device tree blob.
+\item filesystem (\texttt{fs}), input is a directory tree in the
+ layout of \texttt{/proc/device-tree} (roughly, a directory for each
+ node in the device tree, a file for each property). This is useful
+ for building a blob for the device tree in use by the currently
+ running kernel.
+\end{itemize}
+
+In addition, \dtc can output the tree in one of three different
+formats:
+\begin{itemize}
+\item blob (\texttt{dtb}), as in \S\ref{sec:format}. The most
+ straightforward use of \dtc is to compile from ``source'' to
+ ``blob'' format.
+\item source (\texttt{dts}), as in \S\ref{sec:dts}. If used with blob
+ input, this allows \dtc to act as a ``decompiler''.
+\item assembler source (\texttt{asm}). \dtc can produce an assembler
+ file, which will assemble into a \texttt{.o} file containing the
+ device tree blob, with symbols giving the beginning of the blob and
+ its various subsections. This can then be linked directly into a
+ bootloader or firmware image.
+\end{itemize}
+
+For maximum applicability, \dtc can both read and write any of the
+existing revisions of the blob format. When reading, \dtc takes the
+version from the blob header, and when writing it takes a command line
+option specifying the desired version. It automatically makes any
+necessary adjustments to the tree that are necessary for the specified
+version. For example, formats before 0x10 require each node to have
+an explicit \texttt{name} property. When \dtc creates such a blob, it
+will automatically generate \texttt{name} properties from the unit
+names.
+
+\subsection{Source format}
+\label{sec:dts}
+
+The ``source'' format for \dtc is a text description of the device
+tree in a vaguely C-like form. Figure \ref{fig:dts} shows an
+example. The file starts with \texttt{/memreserve/} directives, which
+gives address ranges to add to the output blob's memory reserve table,
+then the device tree proper is described.
+
+Nodes of the tree are introduced with the node name, followed by a
+\texttt{\{} ... \texttt{\};} block containing the node's properties
+and subnodes. Properties are given as just {\emph{name} \texttt{=}
+ \emph{value}\texttt{;}}. The property values can be given in any
+of three forms:
+\begin{itemize}
+\item \emph{string} (for example, \texttt{"MyBoard"}). The property
+ value is the given string, including terminating NULL. C-style
+ escapes (\verb+\t+, \verb+\n+, \verb+\0+ and so forth) are allowed.
+\item \emph{cells} (for example, \texttt{<0 8000 f0000000>}). The
+ property value is made up of a list of 32-bit ``cells'', each given
+ as a hex value.
+\item \emph{bytestring} (for example, \texttt{[1234abcdef]}). The
+ property value is given as a hex bytestring.
+\end{itemize}
+
+Cell properties can also contain \emph{references}. Instead of a hex
+number, the source can give an ampersand (\texttt{\&}) followed by the
+full path to some node in the tree. For example, in Figure
+\ref{fig:dts}, the \texttt{/chosen} node has an
+\texttt{interrupt-controller} property referring to the interrupt
+controller described by the node \texttt{/mpic@0x3fffdd08400}. In the
+output tree, the value of the referenced node's phandle is included in
+the property. If that node doesn't have an explicit phandle property,
+\dtc will automatically create a unique phandle for it. This approach
+makes it easy to create interrupt trees without having to explicitly
+assign and remember phandles for the various interrupt controller
+nodes.
+
+The \dtc source can also include ``labels'', which are placed on a
+particular node or property. For example, Figure \ref{fig:dts} has a
+label ``\texttt{memreg}'' on the \texttt{reg} property of the node
+\texttt{/memory@0}. When using assembler output, corresponding labels
+in the output are generated, which will assemble into symbols
+addressing the part of the blob with the node or property in question.
+This is useful for the common case where an embedded board has an
+essentially fixed device tree with a few variable properties, such as
+the size of memory. The bootloader for such a board can have a device
+tree linked in, including a symbol referring to the right place in the
+blob to update the parameter with the correct value determined at
+runtime.
+
+\subsection{Tree checking}
+
+Between reading in the device tree and writing it out in the new
+format, \dtc performs a number of checks on the tree:
+\begin{itemize}
+\item \emph{syntactic structure}: \dtc checks that node and property
+ names contain only allowed characters and meet length restrictions.
+ It checks that a node does not have multiple properties or subnodes
+ with the same name.
+\item \emph{semantic structure}: In some cases, \dtc checks that
+ properties whose contents are defined by convention have appropriate
+ values. For example, it checks that \texttt{reg} properties have a
+ length that makes sense given the address forms specified by the
+ \texttt{\#address-cells} and \texttt{\#size-cells} properties. It
+ checks that properties such as \texttt{interrupt-parent} contain a
+ valid phandle.
+\item \emph{Linux requirements}: \dtc checks that the device tree
+ contains those nodes and properties that are required by the Linux
+ kernel to boot correctly.
+\end{itemize}
+
+These checks are useful to catch simple problems with the device tree,
+rather than having to debug the results on an embedded kernel. With
+the blob input mode, it can also be used for diagnosing problems with
+an existing blob.
+
+\section{Future Work}
+
+\subsection{Board ports}
+
+The flattened device tree has always been the only supported way to
+boot a \texttt{ppc64} kernel on an embedded system. With the merge of
+\texttt{ppc32} and \texttt{ppc64} code it has also become the only
+supported way to boot any merged \texttt{powerpc} kernel, 32-bit or
+64-bit. In fact, the old \texttt{ppc} architecture exists mainly just
+to support the old ppc32 embedded ports that have not been migrated
+to the flattened device tree approach. We plan to remove the
+\texttt{ppc} architecture eventually, which will mean porting all the
+various embedded boards to use the flattened device tree.
+
+\subsection{\dtc features}
+
+While it is already quite usable, there are a number of extra features
+that \dtc could include to make creating device trees more convenient:
+\begin{itemize}
+\item \emph{better tree checking}: Although \dtc already performs a
+ number of checks on the device tree, they are rather haphazard. In
+ many cases \dtc will give up after detecting a minor error early and
+ won't pick up more interesting errors later on. There is a
+ \texttt{-f} parameter that forces \dtc to generate an output tree
+ even if there are errors. At present, this needs to be used more
+ often than one might hope, because \dtc is bad at deciding which
+ errors should really be fatal, and which rate mere warnings.
+\item \emph{binary include}: Occasionally, it is useful for the device
+ tree to incorporate as a property a block of binary data for some
+ board-specific purpose. For example, many of Apple's device trees
+ incorporate bytecode drivers for certain platform devices. \dtc's
+ source format ought to allow this by letting a property's value be
+ read directly from a binary file.
+\item \emph{macros}: it might be useful for \dtc to implement some
+ sort of macros so that a tree containing a number of similar devices
+ (for example, multiple identical ethernet controllers or PCI buses)
+ can be written more quickly. At present, this can be accomplished
+ in part by running the source file through CPP before compiling with
+ \dtc. It's not clear whether ``native'' support for macros would be
+ more useful.
+\end{itemize}
+
+\bibliographystyle{amsplain}
+\bibliography{dtc-paper}
+
+\section*{About the authors}
+
+David Gibson has been a member of the IBM Linux Technology Center,
+working from Canberra, Australia, since 2001. Recently he has worked
+on Linux hugepage support and performance counter support for ppc64,
+as well as the device tree compiler. In the past, he has worked on
+bringup for various ppc and ppc64 embedded systems, the orinoco
+wireless driver, ramfs, and a userspace checkpointing system
+(\texttt{esky}).
+
+Benjamin Herrenschmidt was a MacOS developer for about 10 years, but
+ultimately saw the light and installed Linux on his Apple PowerPC
+machine. After writing a bootloader, BootX, for it in 1998, he
+started contributing to the PowerPC Linux port in various areas,
+mostly around the support for Apple machines. He became official
+PowerMac maintainer in 2001. In 2003, he joined the IBM Linux
+Technology Center in Canberra, Australia, where he ported the 64 bit
+PowerPC kernel to Apple G5 machines and the Maple embedded board,
+among others things. He's a member of the ppc64 development ``team''
+and one of his current goals is to make the integration of embedded
+platforms smoother and more maintainable than in the 32-bit PowerPC
+kernel.
+
+\section*{Legal Statement}
+
+This work represents the view of the author and does not necessarily
+represent the view of IBM.
+
+IBM, \ppc, \ppc Architecture, POWER5, pSeries and iSeries are
+trademarks or registered trademarks of International Business Machines
+Corporation in the United States and/or other countries.
+
+Apple and Power Macintosh are a registered trademarks of Apple
+Computer Inc. in the United States, other countries, or both.
+
+Linux is a registered trademark of Linus Torvalds.
+
+Other company, product, and service names may be trademarks or service
+marks of others.
+
+\end{document}