--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/qemu-symbian-svp/hw/parallel.c Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,553 @@
+/*
+ * QEMU Parallel PORT emulation
+ *
+ * Copyright (c) 2003-2005 Fabrice Bellard
+ * Copyright (c) 2007 Marko Kohtala
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw.h"
+#include "qemu-char.h"
+#include "isa.h"
+#include "pc.h"
+
+//#define DEBUG_PARALLEL
+
+#ifdef DEBUG_PARALLEL
+#define pdebug(fmt, arg...) printf("pp: " fmt, ##arg)
+#else
+#define pdebug(fmt, arg...) ((void)0)
+#endif
+
+#define PARA_REG_DATA 0
+#define PARA_REG_STS 1
+#define PARA_REG_CTR 2
+#define PARA_REG_EPP_ADDR 3
+#define PARA_REG_EPP_DATA 4
+
+/*
+ * These are the definitions for the Printer Status Register
+ */
+#define PARA_STS_BUSY 0x80 /* Busy complement */
+#define PARA_STS_ACK 0x40 /* Acknowledge */
+#define PARA_STS_PAPER 0x20 /* Out of paper */
+#define PARA_STS_ONLINE 0x10 /* Online */
+#define PARA_STS_ERROR 0x08 /* Error complement */
+#define PARA_STS_TMOUT 0x01 /* EPP timeout */
+
+/*
+ * These are the definitions for the Printer Control Register
+ */
+#define PARA_CTR_DIR 0x20 /* Direction (1=read, 0=write) */
+#define PARA_CTR_INTEN 0x10 /* IRQ Enable */
+#define PARA_CTR_SELECT 0x08 /* Select In complement */
+#define PARA_CTR_INIT 0x04 /* Initialize Printer complement */
+#define PARA_CTR_AUTOLF 0x02 /* Auto linefeed complement */
+#define PARA_CTR_STROBE 0x01 /* Strobe complement */
+
+#define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
+
+struct ParallelState {
+ uint8_t dataw;
+ uint8_t datar;
+ uint8_t status;
+ uint8_t control;
+ qemu_irq irq;
+ int irq_pending;
+ CharDriverState *chr;
+ int hw_driver;
+ int epp_timeout;
+ uint32_t last_read_offset; /* For debugging */
+ /* Memory-mapped interface */
+ int it_shift;
+};
+
+static void parallel_update_irq(ParallelState *s)
+{
+ if (s->irq_pending)
+ qemu_irq_raise(s->irq);
+ else
+ qemu_irq_lower(s->irq);
+}
+
+static void
+parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+
+ pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
+
+ addr &= 7;
+ switch(addr) {
+ case PARA_REG_DATA:
+ s->dataw = val;
+ parallel_update_irq(s);
+ break;
+ case PARA_REG_CTR:
+ val |= 0xc0;
+ if ((val & PARA_CTR_INIT) == 0 ) {
+ s->status = PARA_STS_BUSY;
+ s->status |= PARA_STS_ACK;
+ s->status |= PARA_STS_ONLINE;
+ s->status |= PARA_STS_ERROR;
+ }
+ else if (val & PARA_CTR_SELECT) {
+ if (val & PARA_CTR_STROBE) {
+ s->status &= ~PARA_STS_BUSY;
+ if ((s->control & PARA_CTR_STROBE) == 0)
+ qemu_chr_write(s->chr, &s->dataw, 1);
+ } else {
+ if (s->control & PARA_CTR_INTEN) {
+ s->irq_pending = 1;
+ }
+ }
+ }
+ parallel_update_irq(s);
+ s->control = val;
+ break;
+ }
+}
+
+static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+ uint8_t parm = val;
+ int dir;
+
+ /* Sometimes programs do several writes for timing purposes on old
+ HW. Take care not to waste time on writes that do nothing. */
+
+ s->last_read_offset = ~0U;
+
+ addr &= 7;
+ switch(addr) {
+ case PARA_REG_DATA:
+ if (s->dataw == val)
+ return;
+ pdebug("wd%02x\n", val);
+ qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
+ s->dataw = val;
+ break;
+ case PARA_REG_STS:
+ pdebug("ws%02x\n", val);
+ if (val & PARA_STS_TMOUT)
+ s->epp_timeout = 0;
+ break;
+ case PARA_REG_CTR:
+ val |= 0xc0;
+ if (s->control == val)
+ return;
+ pdebug("wc%02x\n", val);
+
+ if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
+ if (val & PARA_CTR_DIR) {
+ dir = 1;
+ } else {
+ dir = 0;
+ }
+ qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
+ parm &= ~PARA_CTR_DIR;
+ }
+
+ qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
+ s->control = val;
+ break;
+ case PARA_REG_EPP_ADDR:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
+ /* Controls not correct for EPP address cycle, so do nothing */
+ pdebug("wa%02x s\n", val);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
+ if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("wa%02x t\n", val);
+ }
+ else
+ pdebug("wa%02x\n", val);
+ }
+ break;
+ case PARA_REG_EPP_DATA:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("we%02x s\n", val);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
+ if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("we%02x t\n", val);
+ }
+ else
+ pdebug("we%02x\n", val);
+ }
+ break;
+ }
+}
+
+static void
+parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+ uint16_t eppdata = cpu_to_le16(val);
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("we%04x s\n", val);
+ return;
+ }
+ err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("we%04x t\n", val);
+ }
+ else
+ pdebug("we%04x\n", val);
+}
+
+static void
+parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
+{
+ ParallelState *s = opaque;
+ uint32_t eppdata = cpu_to_le32(val);
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("we%08x s\n", val);
+ return;
+ }
+ err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("we%08x t\n", val);
+ }
+ else
+ pdebug("we%08x\n", val);
+}
+
+static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
+{
+ ParallelState *s = opaque;
+ uint32_t ret = 0xff;
+
+ addr &= 7;
+ switch(addr) {
+ case PARA_REG_DATA:
+ if (s->control & PARA_CTR_DIR)
+ ret = s->datar;
+ else
+ ret = s->dataw;
+ break;
+ case PARA_REG_STS:
+ ret = s->status;
+ s->irq_pending = 0;
+ if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
+ /* XXX Fixme: wait 5 microseconds */
+ if (s->status & PARA_STS_ACK)
+ s->status &= ~PARA_STS_ACK;
+ else {
+ /* XXX Fixme: wait 5 microseconds */
+ s->status |= PARA_STS_ACK;
+ s->status |= PARA_STS_BUSY;
+ }
+ }
+ parallel_update_irq(s);
+ break;
+ case PARA_REG_CTR:
+ ret = s->control;
+ break;
+ }
+ pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
+ return ret;
+}
+
+static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
+{
+ ParallelState *s = opaque;
+ uint8_t ret = 0xff;
+ addr &= 7;
+ switch(addr) {
+ case PARA_REG_DATA:
+ qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
+ if (s->last_read_offset != addr || s->datar != ret)
+ pdebug("rd%02x\n", ret);
+ s->datar = ret;
+ break;
+ case PARA_REG_STS:
+ qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
+ ret &= ~PARA_STS_TMOUT;
+ if (s->epp_timeout)
+ ret |= PARA_STS_TMOUT;
+ if (s->last_read_offset != addr || s->status != ret)
+ pdebug("rs%02x\n", ret);
+ s->status = ret;
+ break;
+ case PARA_REG_CTR:
+ /* s->control has some bits fixed to 1. It is zero only when
+ it has not been yet written to. */
+ if (s->control == 0) {
+ qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
+ if (s->last_read_offset != addr)
+ pdebug("rc%02x\n", ret);
+ s->control = ret;
+ }
+ else {
+ ret = s->control;
+ if (s->last_read_offset != addr)
+ pdebug("rc%02x\n", ret);
+ }
+ break;
+ case PARA_REG_EPP_ADDR:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
+ /* Controls not correct for EPP addr cycle, so do nothing */
+ pdebug("ra%02x s\n", ret);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
+ if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("ra%02x t\n", ret);
+ }
+ else
+ pdebug("ra%02x\n", ret);
+ }
+ break;
+ case PARA_REG_EPP_DATA:
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("re%02x s\n", ret);
+ else {
+ struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
+ if (qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
+ s->epp_timeout = 1;
+ pdebug("re%02x t\n", ret);
+ }
+ else
+ pdebug("re%02x\n", ret);
+ }
+ break;
+ }
+ s->last_read_offset = addr;
+ return ret;
+}
+
+static uint32_t
+parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
+{
+ ParallelState *s = opaque;
+ uint32_t ret;
+ uint16_t eppdata = ~0;
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("re%04x s\n", eppdata);
+ return eppdata;
+ }
+ err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
+ ret = le16_to_cpu(eppdata);
+
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("re%04x t\n", ret);
+ }
+ else
+ pdebug("re%04x\n", ret);
+ return ret;
+}
+
+static uint32_t
+parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
+{
+ ParallelState *s = opaque;
+ uint32_t ret;
+ uint32_t eppdata = ~0U;
+ int err;
+ struct ParallelIOArg ioarg = {
+ .buffer = &eppdata, .count = sizeof(eppdata)
+ };
+ if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
+ /* Controls not correct for EPP data cycle, so do nothing */
+ pdebug("re%08x s\n", eppdata);
+ return eppdata;
+ }
+ err = qemu_chr_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
+ ret = le32_to_cpu(eppdata);
+
+ if (err) {
+ s->epp_timeout = 1;
+ pdebug("re%08x t\n", ret);
+ }
+ else
+ pdebug("re%08x\n", ret);
+ return ret;
+}
+
+static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
+{
+ addr &= 7;
+ pdebug("wecp%d=%02x\n", addr, val);
+}
+
+static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
+{
+ uint8_t ret = 0xff;
+ addr &= 7;
+ pdebug("recp%d:%02x\n", addr, ret);
+ return ret;
+}
+
+static void parallel_reset(void *opaque)
+{
+ ParallelState *s = opaque;
+
+ s->datar = ~0;
+ s->dataw = ~0;
+ s->status = PARA_STS_BUSY;
+ s->status |= PARA_STS_ACK;
+ s->status |= PARA_STS_ONLINE;
+ s->status |= PARA_STS_ERROR;
+ s->status |= PARA_STS_TMOUT;
+ s->control = PARA_CTR_SELECT;
+ s->control |= PARA_CTR_INIT;
+ s->control |= 0xc0;
+ s->irq_pending = 0;
+ s->hw_driver = 0;
+ s->epp_timeout = 0;
+ s->last_read_offset = ~0U;
+}
+
+/* If fd is zero, it means that the parallel device uses the console */
+ParallelState *parallel_init(int base, qemu_irq irq, CharDriverState *chr)
+{
+ ParallelState *s;
+ uint8_t dummy;
+
+ s = qemu_mallocz(sizeof(ParallelState));
+ if (!s)
+ return NULL;
+ s->irq = irq;
+ s->chr = chr;
+ parallel_reset(s);
+ qemu_register_reset(parallel_reset, s);
+
+ if (qemu_chr_ioctl(chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
+ s->hw_driver = 1;
+ s->status = dummy;
+ }
+
+ if (s->hw_driver) {
+ register_ioport_write(base, 8, 1, parallel_ioport_write_hw, s);
+ register_ioport_read(base, 8, 1, parallel_ioport_read_hw, s);
+ register_ioport_write(base+4, 1, 2, parallel_ioport_eppdata_write_hw2, s);
+ register_ioport_read(base+4, 1, 2, parallel_ioport_eppdata_read_hw2, s);
+ register_ioport_write(base+4, 1, 4, parallel_ioport_eppdata_write_hw4, s);
+ register_ioport_read(base+4, 1, 4, parallel_ioport_eppdata_read_hw4, s);
+ register_ioport_write(base+0x400, 8, 1, parallel_ioport_ecp_write, s);
+ register_ioport_read(base+0x400, 8, 1, parallel_ioport_ecp_read, s);
+ }
+ else {
+ register_ioport_write(base, 8, 1, parallel_ioport_write_sw, s);
+ register_ioport_read(base, 8, 1, parallel_ioport_read_sw, s);
+ }
+ return s;
+}
+
+/* Memory mapped interface */
+static uint32_t parallel_mm_readb (void *opaque, target_phys_addr_t addr)
+{
+ ParallelState *s = opaque;
+
+ return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
+}
+
+static void parallel_mm_writeb (void *opaque,
+ target_phys_addr_t addr, uint32_t value)
+{
+ ParallelState *s = opaque;
+
+ parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
+}
+
+static uint32_t parallel_mm_readw (void *opaque, target_phys_addr_t addr)
+{
+ ParallelState *s = opaque;
+
+ return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
+}
+
+static void parallel_mm_writew (void *opaque,
+ target_phys_addr_t addr, uint32_t value)
+{
+ ParallelState *s = opaque;
+
+ parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
+}
+
+static uint32_t parallel_mm_readl (void *opaque, target_phys_addr_t addr)
+{
+ ParallelState *s = opaque;
+
+ return parallel_ioport_read_sw(s, addr >> s->it_shift);
+}
+
+static void parallel_mm_writel (void *opaque,
+ target_phys_addr_t addr, uint32_t value)
+{
+ ParallelState *s = opaque;
+
+ parallel_ioport_write_sw(s, addr >> s->it_shift, value);
+}
+
+static CPUReadMemoryFunc *parallel_mm_read_sw[] = {
+ ¶llel_mm_readb,
+ ¶llel_mm_readw,
+ ¶llel_mm_readl,
+};
+
+static CPUWriteMemoryFunc *parallel_mm_write_sw[] = {
+ ¶llel_mm_writeb,
+ ¶llel_mm_writew,
+ ¶llel_mm_writel,
+};
+
+/* If fd is zero, it means that the parallel device uses the console */
+ParallelState *parallel_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq, CharDriverState *chr)
+{
+ ParallelState *s;
+ int io_sw;
+
+ s = qemu_mallocz(sizeof(ParallelState));
+ if (!s)
+ return NULL;
+ s->irq = irq;
+ s->chr = chr;
+ s->it_shift = it_shift;
+ parallel_reset(s);
+ qemu_register_reset(parallel_reset, s);
+
+ io_sw = cpu_register_io_memory(0, parallel_mm_read_sw, parallel_mm_write_sw, s);
+ cpu_register_physical_memory(base, 8 << it_shift, io_sw);
+ return s;
+}