--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/qemu-symbian-svp/linux-user/socket.h	Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,147 @@
+
+#if defined(TARGET_MIPS)
+	// MIPS special values for constants
+
+	/*
+	 * For setsockopt(2)
+	 *
+	 * This defines are ABI conformant as far as Linux supports these ...
+	 */
+	#define TARGET_SOL_SOCKET      0xffff
+
+	#define TARGET_SO_DEBUG        0x0001  /* Record debugging information.  */
+	#define TARGET_SO_REUSEADDR    0x0004  /* Allow reuse of local addresses.  */
+	#define TARGET_SO_KEEPALIVE    0x0008  /* Keep connections alive and send
+					  SIGPIPE when they die.  */
+	#define TARGET_SO_DONTROUTE    0x0010  /* Don't do local routing.  */
+	#define TARGET_SO_BROADCAST    0x0020  /* Allow transmission of
+					  broadcast messages.  */
+	#define TARGET_SO_LINGER       0x0080  /* Block on close of a reliable
+					  socket to transmit pending data.  */
+	#define TARGET_SO_OOBINLINE 0x0100     /* Receive out-of-band data in-band.  */
+	#if 0
+	To add: #define TARGET_SO_REUSEPORT 0x0200     /* Allow local address and port reuse.  */
+	#endif
+
+	#define TARGET_SO_TYPE         0x1008  /* Compatible name for SO_STYLE.  */
+	#define TARGET_SO_STYLE        SO_TYPE /* Synonym */
+	#define TARGET_SO_ERROR        0x1007  /* get error status and clear */
+	#define TARGET_SO_SNDBUF       0x1001  /* Send buffer size. */
+	#define TARGET_SO_RCVBUF       0x1002  /* Receive buffer. */
+	#define TARGET_SO_SNDLOWAT     0x1003  /* send low-water mark */
+	#define TARGET_SO_RCVLOWAT     0x1004  /* receive low-water mark */
+	#define TARGET_SO_SNDTIMEO     0x1005  /* send timeout */
+	#define TARGET_SO_RCVTIMEO     0x1006  /* receive timeout */
+	#define TARGET_SO_ACCEPTCONN   0x1009
+
+	/* linux-specific, might as well be the same as on i386 */
+	#define TARGET_SO_NO_CHECK     11
+	#define TARGET_SO_PRIORITY     12
+	#define TARGET_SO_BSDCOMPAT    14
+
+	#define TARGET_SO_PASSCRED     17
+	#define TARGET_SO_PEERCRED     18
+
+	/* Security levels - as per NRL IPv6 - don't actually do anything */
+	#define TARGET_SO_SECURITY_AUTHENTICATION              22
+	#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
+	#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
+
+	#define TARGET_SO_BINDTODEVICE         25
+
+	/* Socket filtering */
+	#define TARGET_SO_ATTACH_FILTER        26
+	#define TARGET_SO_DETACH_FILTER        27
+
+	#define TARGET_SO_PEERNAME             28
+	#define TARGET_SO_TIMESTAMP            29
+	#define SCM_TIMESTAMP          SO_TIMESTAMP
+
+	#define TARGET_SO_PEERSEC              30
+	#define TARGET_SO_SNDBUFFORCE          31
+	#define TARGET_SO_RCVBUFFORCE          33
+
+	/** sock_type - Socket types
+	 *
+	 * Please notice that for binary compat reasons MIPS has to
+	 * override the enum sock_type in include/linux/net.h, so
+	 * we define ARCH_HAS_SOCKET_TYPES here.
+	 *
+	 * @SOCK_DGRAM - datagram (conn.less) socket
+	 * @SOCK_STREAM - stream (connection) socket
+	 * @SOCK_RAW - raw socket
+	 * @SOCK_RDM - reliably-delivered message
+	 * @SOCK_SEQPACKET - sequential packet socket
+	 * @SOCK_PACKET - linux specific way of getting packets at the dev level.
+	 *               For writing rarp and other similar things on the user level.
+	 */
+	enum sock_type {
+	       TARGET_SOCK_DGRAM       = 1,
+	       TARGET_SOCK_STREAM      = 2,
+	       TARGET_SOCK_RAW = 3,
+	       TARGET_SOCK_RDM = 4,
+	       TARGET_SOCK_SEQPACKET   = 5,
+	       TARGET_SOCK_DCCP        = 6,
+	       TARGET_SOCK_PACKET      = 10,
+	};
+
+	#define TARGET_SOCK_MAX (SOCK_PACKET + 1)
+
+#else
+
+	/* For setsockopt(2) */
+	#define TARGET_SOL_SOCKET      1
+
+	#define TARGET_SO_DEBUG        1
+	#define TARGET_SO_REUSEADDR    2
+	#define TARGET_SO_TYPE         3
+	#define TARGET_SO_ERROR        4
+	#define TARGET_SO_DONTROUTE    5
+	#define TARGET_SO_BROADCAST    6
+	#define TARGET_SO_SNDBUF       7
+	#define TARGET_SO_RCVBUF       8
+	#define TARGET_SO_SNDBUFFORCE  32
+	#define TARGET_SO_RCVBUFFORCE  33
+	#define TARGET_SO_KEEPALIVE    9
+	#define TARGET_SO_OOBINLINE    10
+	#define TARGET_SO_NO_CHECK     11
+	#define TARGET_SO_PRIORITY     12
+	#define TARGET_SO_LINGER       13
+	#define TARGET_SO_BSDCOMPAT    14
+	/* To add :#define TARGET_SO_REUSEPORT 15 */
+#if defined(TARGET_PPC)
+	#define TARGET_SO_RCVLOWAT     16
+	#define TARGET_SO_SNDLOWAT     17
+	#define TARGET_SO_RCVTIMEO     18
+	#define TARGET_SO_SNDTIMEO     19
+	#define TARGET_SO_PASSCRED     20
+	#define TARGET_SO_PEERCRED     21
+#else
+	#define TARGET_SO_PASSCRED     16
+	#define TARGET_SO_PEERCRED     17
+	#define TARGET_SO_RCVLOWAT     18
+	#define TARGET_SO_SNDLOWAT     19
+	#define TARGET_SO_RCVTIMEO     20
+	#define TARGET_SO_SNDTIMEO     21
+#endif
+
+	/* Security levels - as per NRL IPv6 - don't actually do anything */
+	#define TARGET_SO_SECURITY_AUTHENTICATION              22
+	#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
+	#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
+
+	#define TARGET_SO_BINDTODEVICE 25
+
+	/* Socket filtering */
+	#define TARGET_SO_ATTACH_FILTER        26
+	#define TARGET_SO_DETACH_FILTER        27
+
+	#define TARGET_SO_PEERNAME             28
+	#define TARGET_SO_TIMESTAMP            29
+	#define TARGET_SCM_TIMESTAMP           TARGET_SO_TIMESTAMP
+
+	#define TARGET_SO_ACCEPTCONN           30
+
+	#define TARGET_SO_PEERSEC              31
+
+#endif