diff -r ffa851df0825 -r 2fb8b9db1c86 symbian-qemu-0.9.1-12/python-2.6.1/Doc/using/cmdline.rst
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/symbian-qemu-0.9.1-12/python-2.6.1/Doc/using/cmdline.rst	Fri Jul 31 15:01:17 2009 +0100
@@ -0,0 +1,544 @@
+.. highlightlang:: none
+
+.. _using-on-general:
+
+Command line and environment
+============================
+
+The CPython interpreter scans the command line and the environment for various
+settings.
+
+.. note:: 
+   
+   Other implementations' command line schemes may differ.  See
+   :ref:`implementations` for further resources.
+
+
+.. _using-on-cmdline:
+
+Command line
+------------
+
+When invoking Python, you may specify any of these options::
+
+    python [-dEiOQsStuUvxX3?] [-c command | -m module-name | script | - ] [args]
+
+The most common use case is, of course, a simple invocation of a script::
+
+    python myscript.py
+
+
+.. _using-on-interface-options:
+
+Interface options
+~~~~~~~~~~~~~~~~~
+
+The interpreter interface resembles that of the UNIX shell, but provides some
+additional methods of invocation:
+
+* When called with standard input connected to a tty device, it prompts for
+  commands and executes them until an EOF (an end-of-file character, you can
+  produce that with *Ctrl-D* on UNIX or *Ctrl-Z, Enter* on Windows) is read.
+* When called with a file name argument or with a file as standard input, it
+  reads and executes a script from that file.
+* When called with a directory name argument, it reads and executes an
+  appropriately named script from that directory.
+* When called with ``-c command``, it executes the Python statement(s) given as
+  *command*.  Here *command* may contain multiple statements separated by
+  newlines. Leading whitespace is significant in Python statements!
+* When called with ``-m module-name``, the given module is located on the
+  Python module path and executed as a script.
+
+In non-interactive mode, the entire input is parsed before it is executed.
+
+An interface option terminates the list of options consumed by the interpreter,
+all consecutive arguments will end up in :data:`sys.argv` -- note that the first
+element, subscript zero (``sys.argv[0]``), is a string reflecting the program's
+source.
+
+.. cmdoption:: -c <command>
+
+   Execute the Python code in *command*.  *command* can be one ore more
+   statements separated by newlines, with significant leading whitespace as in
+   normal module code.
+   
+   If this option is given, the first element of :data:`sys.argv` will be
+   ``"-c"`` and the current directory will be added to the start of
+   :data:`sys.path` (allowing modules in that directory to be imported as top
+   level modules).
+
+
+.. cmdoption:: -m <module-name>
+
+   Search :data:`sys.path` for the named module and execute its contents as
+   the :mod:`__main__` module.
+   
+   Since the argument is a *module* name, you must not give a file extension
+   (``.py``).  The ``module-name`` should be a valid Python module name, but
+   the implementation may not always enforce this (e.g. it may allow you to
+   use a name that includes a hyphen).
+
+   .. note::
+
+      This option cannot be used with builtin modules and extension modules
+      written in C, since they do not have Python module files. However, it
+      can still be used for precompiled modules, even if the original source
+      file is not available.
+   
+   If this option is given, the first element of :data:`sys.argv` will be the
+   full path to the module file. As with the :option:`-c` option, the current
+   directory will be added to the start of :data:`sys.path`.
+   
+   Many standard library modules contain code that is invoked on their execution
+   as a script.  An example is the :mod:`timeit` module::
+
+       python -mtimeit -s 'setup here' 'benchmarked code here'
+       python -mtimeit -h # for details
+
+   .. seealso:: 
+      :func:`runpy.run_module`
+         The actual implementation of this feature.
+
+      :pep:`338` -- Executing modules as scripts
+
+   .. versionadded:: 2.4
+
+   .. versionchanged:: 2.5
+      The named module can now be located inside a package.
+
+
+.. describe:: -
+
+   Read commands from standard input (:data:`sys.stdin`).  If standard input is
+   a terminal, :option:`-i` is implied.
+
+   If this option is given, the first element of :data:`sys.argv` will be
+   ``"-"`` and the current directory will be added to the start of
+   :data:`sys.path`.
+
+
+.. describe:: <script>
+
+   Execute the Python code contained in *script*, which must be a filesystem
+   path (absolute or relative) referring to either a Python file, a directory
+   containing a ``__main__.py`` file, or a zipfile containing a
+   ``__main__.py`` file.
+
+   If this option is given, the first element of :data:`sys.argv` will be the
+   script name as given on the command line.
+
+   If the script name refers directly to a Python file, the directory
+   containing that file is added to the start of :data:`sys.path`, and the
+   file is executed as the :mod:`__main__` module.
+
+   If the script name refers to a directory or zipfile, the script name is
+   added to the start of :data:`sys.path` and the ``__main__.py`` file in
+   that location is executed as the :mod:`__main__` module.
+
+   .. versionchanged:: 2.5
+      Directories and zipfiles containing a ``__main__.py`` file at the top
+      level are now considered valid Python scripts.
+
+If no interface option is given, :option:`-i` is implied, ``sys.argv[0]`` is
+an empty string (``""``) and the current directory will be added to the
+start of :data:`sys.path`.
+
+.. seealso::  :ref:`tut-invoking`
+
+
+Generic options
+~~~~~~~~~~~~~~~
+
+.. cmdoption:: -?
+               -h
+               --help
+
+   Print a short description of all command line options.
+
+   .. versionchanged:: 2.5
+      The ``--help`` variant.
+
+
+.. cmdoption:: -V
+               --version
+
+   Print the Python version number and exit.  Example output could be::
+    
+       Python 2.5.1
+
+   .. versionchanged:: 2.5
+      The ``--version`` variant.
+
+
+Miscellaneous options
+~~~~~~~~~~~~~~~~~~~~~
+
+.. cmdoption:: -B
+
+   If given, Python won't try to write ``.pyc`` or ``.pyo`` files on the
+   import of source modules.  See also :envvar:`PYTHONDONTWRITEBYTECODE`.
+
+   .. versionadded:: 2.6
+
+
+.. cmdoption:: -d
+
+   Turn on parser debugging output (for wizards only, depending on compilation
+   options).  See also :envvar:`PYTHONDEBUG`.
+
+
+.. cmdoption:: -E
+
+   Ignore all :envvar:`PYTHON*` environment variables, e.g.
+   :envvar:`PYTHONPATH` and :envvar:`PYTHONHOME`, that might be set.
+
+   .. versionadded:: 2.2
+
+
+.. cmdoption:: -i
+
+   When a script is passed as first argument or the :option:`-c` option is used,
+   enter interactive mode after executing the script or the command, even when
+   :data:`sys.stdin` does not appear to be a terminal.  The
+   :envvar:`PYTHONSTARTUP` file is not read.
+   
+   This can be useful to inspect global variables or a stack trace when a script
+   raises an exception.  See also :envvar:`PYTHONINSPECT`.
+
+
+.. cmdoption:: -O
+
+   Turn on basic optimizations.  This changes the filename extension for
+   compiled (:term:`bytecode`) files from ``.pyc`` to ``.pyo``.  See also
+   :envvar:`PYTHONOPTIMIZE`.
+
+
+.. cmdoption:: -OO
+
+   Discard docstrings in addition to the :option:`-O` optimizations.
+
+
+.. cmdoption:: -Q <arg>
+
+   Division control. The argument must be one of the following:
+   
+   ``old``
+     division of int/int and long/long return an int or long (*default*)
+   ``new``
+     new division semantics, i.e. division of int/int and long/long returns a
+     float
+   ``warn``
+     old division semantics with a warning for int/int and long/long
+   ``warnall``
+     old division semantics with a warning for all uses of the division operator
+
+   .. seealso::
+      :file:`Tools/scripts/fixdiv.py`
+         for a use of ``warnall``
+
+      :pep:`238` -- Changing the division operator
+
+
+.. cmdoption:: -s
+
+   Don't add user site directory to sys.path
+
+   .. versionadded:: 2.6
+
+   .. seealso::
+
+      :pep:`370` -- Per user site-packages directory
+
+
+.. cmdoption:: -S
+
+   Disable the import of the module :mod:`site` and the site-dependent
+   manipulations of :data:`sys.path` that it entails.
+
+
+.. cmdoption:: -t
+
+   Issue a warning when a source file mixes tabs and spaces for indentation in a
+   way that makes it depend on the worth of a tab expressed in spaces.  Issue an
+   error when the option is given twice (:option:`-tt`).
+
+
+.. cmdoption:: -u
+   
+   Force stdin, stdout and stderr to be totally unbuffered.  On systems where it
+   matters, also put stdin, stdout and stderr in binary mode.
+   
+   Note that there is internal buffering in :meth:`file.readlines` and
+   :ref:`bltin-file-objects` (``for line in sys.stdin``) which is not influenced
+   by this option.  To work around this, you will want to use
+   :meth:`file.readline` inside a ``while 1:`` loop.
+
+   See also :envvar:`PYTHONUNBUFFERED`.
+
+
+.. XXX should the -U option be documented?
+
+.. cmdoption:: -v
+   
+   Print a message each time a module is initialized, showing the place
+   (filename or built-in module) from which it is loaded.  When given twice
+   (:option:`-vv`), print a message for each file that is checked for when
+   searching for a module.  Also provides information on module cleanup at exit.
+   See also :envvar:`PYTHONVERBOSE`.
+
+
+.. cmdoption:: -W arg
+   
+   Warning control.  Python's warning machinery by default prints warning
+   messages to :data:`sys.stderr`.  A typical warning message has the following
+   form::
+
+       file:line: category: message
+       
+   By default, each warning is printed once for each source line where it
+   occurs.  This option controls how often warnings are printed.
+
+   Multiple :option:`-W` options may be given; when a warning matches more than
+   one option, the action for the last matching option is performed.  Invalid
+   :option:`-W` options are ignored (though, a warning message is printed about
+   invalid options when the first warning is issued).
+   
+   Warnings can also be controlled from within a Python program using the
+   :mod:`warnings` module.
+
+   The simplest form of argument is one of the following action strings (or a
+   unique abbreviation):
+    
+   ``ignore``
+      Ignore all warnings.
+   ``default``
+      Explicitly request the default behavior (printing each warning once per
+      source line).
+   ``all``
+      Print a warning each time it occurs (this may generate many messages if a
+      warning is triggered repeatedly for the same source line, such as inside a
+      loop).
+   ``module``
+      Print each warning only only the first time it occurs in each module.
+   ``once``
+      Print each warning only the first time it occurs in the program.
+   ``error``
+      Raise an exception instead of printing a warning message.
+      
+   The full form of argument is:: 
+   
+       action:message:category:module:line
+
+   Here, *action* is as explained above but only applies to messages that match
+   the remaining fields.  Empty fields match all values; trailing empty fields
+   may be omitted.  The *message* field matches the start of the warning message
+   printed; this match is case-insensitive.  The *category* field matches the
+   warning category.  This must be a class name; the match test whether the
+   actual warning category of the message is a subclass of the specified warning
+   category.  The full class name must be given.  The *module* field matches the
+   (fully-qualified) module name; this match is case-sensitive.  The *line*
+   field matches the line number, where zero matches all line numbers and is
+   thus equivalent to an omitted line number.
+
+   .. seealso::
+      :mod:`warnings` -- the warnings module
+
+      :pep:`230` -- Warning framework
+
+
+.. cmdoption:: -x
+   
+   Skip the first line of the source, allowing use of non-Unix forms of
+   ``#!cmd``.  This is intended for a DOS specific hack only.
+   
+   .. warning:: The line numbers in error messages will be off by one!
+
+
+.. cmdoption:: -3
+
+   Warn about Python 3.x incompatibilities. Among these are:
+
+   * :meth:`dict.has_key`
+   * :func:`apply`
+   * :func:`callable`
+   * :func:`coerce`
+   * :func:`execfile`
+   * :func:`reduce`
+   * :func:`reload`
+
+   Using these will emit a :exc:`DeprecationWarning`.
+
+   .. versionadded:: 2.6
+
+
+
+.. _using-on-envvars:
+
+Environment variables
+---------------------
+
+These environment variables influence Python's behavior.
+
+.. envvar:: PYTHONHOME
+   
+   Change the location of the standard Python libraries.  By default, the
+   libraries are searched in :file:`{prefix}/lib/python{version}` and
+   :file:`{exec_prefix}/lib/python{version}`, where :file:`{prefix}` and
+   :file:`{exec_prefix}` are installation-dependent directories, both defaulting
+   to :file:`/usr/local`.
+   
+   When :envvar:`PYTHONHOME` is set to a single directory, its value replaces
+   both :file:`{prefix}` and :file:`{exec_prefix}`.  To specify different values
+   for these, set :envvar:`PYTHONHOME` to :file:`{prefix}:{exec_prefix}`.
+
+
+.. envvar:: PYTHONPATH
+
+   Augment the default search path for module files.  The format is the same as
+   the shell's :envvar:`PATH`: one or more directory pathnames separated by
+   :data:`os.pathsep` (e.g. colons on Unix or semicolons on Windows).
+   Non-existent directories are silently ignored.
+
+   In addition to normal directories, individual :envvar:`PYTHONPATH` entries
+   may refer to zipfiles containing pure Python modules (in either source or
+   compiled form). Extension modules cannot be imported from zipfiles.
+   
+   The default search path is installation dependent, but generally begins with
+   :file:`{prefix}/lib/python{version}`` (see :envvar:`PYTHONHOME` above).  It
+   is *always* appended to :envvar:`PYTHONPATH`.
+   
+   An additional directory will be inserted in the search path in front of
+   :envvar:`PYTHONPATH` as described above under
+   :ref:`using-on-interface-options`. The search path can be manipulated from
+   within a Python program as the variable :data:`sys.path`.
+
+
+.. envvar:: PYTHONSTARTUP
+   
+   If this is the name of a readable file, the Python commands in that file are
+   executed before the first prompt is displayed in interactive mode.  The file
+   is executed in the same namespace where interactive commands are executed so
+   that objects defined or imported in it can be used without qualification in
+   the interactive session.  You can also change the prompts :data:`sys.ps1` and
+   :data:`sys.ps2` in this file.
+
+
+.. envvar:: PYTHONY2K
+   
+   Set this to a non-empty string to cause the :mod:`time` module to require
+   dates specified as strings to include 4-digit years, otherwise 2-digit years
+   are converted based on rules described in the :mod:`time` module
+   documentation.
+
+
+.. envvar:: PYTHONOPTIMIZE
+   
+   If this is set to a non-empty string it is equivalent to specifying the
+   :option:`-O` option.  If set to an integer, it is equivalent to specifying
+   :option:`-O` multiple times.
+
+
+.. envvar:: PYTHONDEBUG
+   
+   If this is set to a non-empty string it is equivalent to specifying the
+   :option:`-d` option.  If set to an integer, it is equivalent to specifying
+   :option:`-d` multiple times.
+
+
+.. envvar:: PYTHONINSPECT
+   
+   If this is set to a non-empty string it is equivalent to specifying the
+   :option:`-i` option.
+
+   This variable can also be modified by Python code using :data:`os.environ`
+   to force inspect mode on program termination.
+
+
+.. envvar:: PYTHONUNBUFFERED
+   
+   If this is set to a non-empty string it is equivalent to specifying the
+   :option:`-u` option.
+
+
+.. envvar:: PYTHONVERBOSE
+   
+   If this is set to a non-empty string it is equivalent to specifying the
+   :option:`-v` option.  If set to an integer, it is equivalent to specifying
+   :option:`-v` multiple times.
+
+
+.. envvar:: PYTHONCASEOK
+   
+   If this is set, Python ignores case in :keyword:`import` statements.  This
+   only works on Windows.
+
+
+.. envvar:: PYTHONDONTWRITEBYTECODE
+
+   If this is set, Python won't try to write ``.pyc`` or ``.pyo`` files on the
+   import of source modules.
+
+   .. versionadded:: 2.6
+
+.. envvar:: PYTHONIOENCODING
+
+   Overrides the encoding used for stdin/stdout/stderr, in the syntax
+   ``encodingname:errorhandler``.  The ``:errorhandler`` part is optional and
+   has the same meaning as in :func:`str.encode`.
+
+   .. versionadded:: 2.6
+
+
+.. envvar:: PYTHONNOUSERSITE
+
+   If this is set, Python won't add the user site directory to sys.path
+
+   .. versionadded:: 2.6
+
+   .. seealso::
+
+      :pep:`370` -- Per user site-packages directory
+
+
+.. envvar:: PYTHONUSERBASE
+
+   Sets the base directory for the user site directory
+
+   .. versionadded:: 2.6
+
+   .. seealso::
+
+      :pep:`370` -- Per user site-packages directory
+
+
+.. envvar:: PYTHONEXECUTABLE
+
+   If this environment variable is set, ``sys.argv[0]`` will be set to its
+   value instead of the value got through the C runtime.  Only works on
+   Mac OS X.
+
+
+Debug-mode variables
+~~~~~~~~~~~~~~~~~~~~
+
+Setting these variables only has an effect in a debug build of Python, that is,
+if Python was configured with the :option:`--with-pydebug` build option.
+
+.. envvar:: PYTHONTHREADDEBUG
+
+   If set, Python will print threading debug info.
+
+   .. versionchanged:: 2.6
+      Previously, this variable was called ``THREADDEBUG``.
+
+.. envvar:: PYTHONDUMPREFS
+
+   If set, Python will dump objects and reference counts still alive after
+   shutting down the interpreter.
+
+
+.. envvar:: PYTHONMALLOCSTATS
+
+   If set, Python will print memory allocation statistics every time a new
+   object arena is created, and on shutdown.
+