diff -r 0fd27995241b -r 9ac0a0a7da70 javaextensions/mobinfo/tsrc/midlet/mobinfoprop/nbproject/buildimpl.xml
--- a/javaextensions/mobinfo/tsrc/midlet/mobinfoprop/nbproject/buildimpl.xml	Tue May 11 16:07:20 2010 +0300
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,1151 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
-<project name="MobInfoProp-impl" default="jar" basedir="..">
-    <!--load-properties-->
-    <target name="pre-load-properties">
-        <property file="nbproject/private/private.properties"/>
-        <property name="user.properties.file" location="${netbeans.user}/build.properties"/>
-        <available property="user.properties.file.exists" file="${user.properties.file}"/>
-    </target>
-    <target name="exists.config.active" unless="config.active">
-        <echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
-        <property value="" name="config.active"/>
-    </target>
-    <target name="exists.netbeans.user" unless="netbeans.user">
-        <echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
-    </target>
-    <target name="exists.user.properties.file" unless="user.properties.file.exists">
-        <echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
-    </target>
-    <target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
-        <loadproperties srcfile="nbproject/project.properties">
-            <filterchain>
-                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
-                <concatfilter prepend="nbproject/project.properties"/>
-                <containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
-            </filterchain>
-        </loadproperties>
-        <property name="deployment.instance" value="default"/>
-        <loadproperties srcfile="${user.properties.file}">
-            <filterchain>
-                <replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
-                <replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
-                <replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
-            </filterchain>
-        </loadproperties>
-        <loadproperties srcfile="nbproject/project.properties">
-            <filterchain>
-                <containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
-                <concatfilter prepend="nbproject/project.properties"/>
-            </filterchain>
-        </loadproperties>
-    </target>
-    <!--basic-init-->
-    <target name="exists.platform.active" unless="platform.active">
-        <echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
-    </target>
-    <target name="exists.platform.configuration" unless="platform.configuration">
-        <echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
-        <property name="platform.configuration" value="CLDC-1.0"/>
-    </target>
-    <target name="exists.platform.profile" unless="platform.profile">
-        <echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
-        <property name="platform.profile" value="MIDP-1.0"/>
-    </target>
-    <target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
-        <fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
-        <fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
-        <fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
-        <fail unless="src.dir">Must set src.dir</fail>
-        <fail unless="build.dir">Must set build.dir</fail>
-        <fail unless="dist.dir">Must set dist.dir</fail>
-        <fail unless="dist.jar">Must set dist.jar</fail>
-        <property name="javac.source" value="1.3"/>
-        <property name="javac.target" value="1.1"/>
-        <property name="javac.encoding" value="${file.encoding}"/>
-        <property name="deployment.number" value="0.0.1"/>
-        <property name="deployment.counter" value="000002"/>
-        <condition property="no.deps">
-            <istrue value="${no.dependencies}"/>
-        </condition>
-        <condition property="no.preprocess">
-            <isfalse value="${use.preprocessor}"/>
-        </condition>
-        <condition property="no.javadoc.preview">
-            <isfalse value="${javadoc.preview}"/>
-        </condition>
-        <condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
-            <istrue value="${filter.exclude.tests}"/>
-        </condition>
-        <property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
-        <condition property="deployment.do.override.jarurl" value="">
-            <istrue value="${deployment.override.jarurl}"/>
-        </condition>
-        <condition property="config.active.name" value="DefaultConfiguration">
-            <length string="${config.active}" trim="true" length="0"/>
-        </condition>
-        <property name="config.active.name" value="${config.active}"/>
-        <taskdef resource="org/netbeans/mobility/antext/defs.properties">
-            <classpath>
-                <pathelement path="${libs.j2me_ant_ext.classpath}"/>
-            </classpath>
-        </taskdef>
-        <condition property="skip.deployment">
-            <equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
-        </condition>
-        <condition property="app-version.autoincrement.trigger">
-            <istrue value="${app-version.autoincrement}"/>
-        </condition>
-        <nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
-    </target>
-    <!--cldc-init-->
-    <target name="cldc-pre-init">
-        <condition property="cldc-platform.trigger">
-            <equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
-        </condition>
-    </target>
-    <target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
-        <property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
-        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
-        <property name="platform.device" value=""/>
-        <property name="dist.jad.url" value="file://"/>
-        <property name="run.cmd.options" value=""/>
-        <condition property="evaluated.run.security.domain" value="">
-            <isfalse value="${run.use.security.domain}"/>
-        </condition>
-        <property name="evaluated.run.security.domain" value="${run.security.domain}"/>
-        <condition property="override.jarurl.trigger">
-            <and>
-                <istrue value="${cldc-platform.trigger}"/>
-                <istrue value="${deployment.override.jarurl}"/>
-            </and>
-        </condition>
-        <property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
-        <property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
-        <property name="deployment.dir" location="${dist.dir}"/>
-        <patternset id="deployment.patternset">
-            <include name="${dist.jad}"/>
-            <include name="${dist.jar}"/>
-        </patternset>
-    </target>
-    <!--cdc-init-->
-    <target name="cdc-init">
-        <condition property="cdc-platform.trigger">
-            <equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
-        </condition>
-        <available file="${manifest.file}" property="manifest.available"/>
-        <condition property="main.class.applet">
-            <equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
-        </condition>
-        <condition property="main.class.xlet">
-            <equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
-        </condition>
-        <condition property="manifest.available+main.class+fat.jar">
-            <and>
-                <isset property="manifest.available"/>
-                <isset property="main.class"/>
-                <istrue value="${platform.fat.jar}"/>
-                <not>
-                    <equals arg1="${main.class}" arg2="" trim="true"/>
-                </not>
-            </and>
-        </condition>
-        <condition property="manifest.available+main.class">
-            <and>
-                <isset property="manifest.available"/>
-                <isset property="main.class"/>
-                <isfalse value="${platform.fat.jar}"/>
-                <not>
-                    <equals arg1="${main.class}" arg2="" trim="true"/>
-                </not>
-            </and>
-        </condition>
-        <condition property="application.version.invalid" value="true">
-            <equals arg1="${deployment.number}" arg2="" trim="true"/>
-        </condition>
-        <fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
-    </target>
-    <!--ricoh-init-->
-    <target name="ricoh-pre-init" if="cdc-platform.trigger">
-        <condition property="ricoh-platform.trigger">
-            <equals arg1="ricoh" arg2="${platform.type}" casesensitive="false"/>
-        </condition>
-    </target>
-    <target name="ricoh-init" depends="ricoh-pre-init" if="ricoh-platform.trigger">
-        <available property="jcifs" classname="jcifs.smb.SmbFile" classpath="${libs.RicohAntTools.classpath}"/>
-        <condition property="no.vendor.name" value="true">
-            <equals arg1="${application.vendor}" arg2="" trim="true"/>
-        </condition>
-        <condition property="ricoh.dalp.install.mode" value="auto" else="manual">
-            <istrue value="${ricoh.dalp.install.mode.auto}"/>
-        </condition>
-        <condition property="ricoh.dalp.display-mode.type" value="COLOR" else="MONO">
-            <istrue value="${ricoh.dalp.display-mode.color}"/>
-        </condition>
-        <property name="xml.dir" value="${build.dir}/dalp"/>
-        <property name="xlet.dalp" value="${application.name}.dalp"/>
-        <property name="xlet.dalp.name-only" value="${application.name}.dalp"/>
-        <property name="deploy.dir" value="${dist.dir}/deploy"/>
-        <property name="rideploy.zip" value="${dist.dir}/${application.name}.zip"/>
-        <property name="ricoh.dalp.is-managed" value="true"/>
-        <property name="ricoh.dalp.information.is-icon-used" value="true"/>
-        <property name="ricoh.platform.target.version" value="2.0"/>
-        <property name="ricoh.dalp.version" value="${deployment.number}"/>
-        <property name="ricoh.dalp.application-desc.visible" value="true"/>
-        <property name="ricoh.dalp.install.destination" value="hdd"/>
-        <property name="ricoh.dalp.install.work-dir" value="hdd"/>
-        <property name="ricoh.dalp.information.abbreviation" value="RICOH"/>
-        <taskdef name="taskIf" classname="ricoh.ant.ConditionalTask" classpath="${libs.ricoh-ant-utils.classpath}"/>
-        <taskdef name="dalp" classname="org.netbeans.modules.j2me.cdc.project.ricoh.DalpBuilder" classpath="${libs.ricoh-ant-utils.classpath}"/>
-        <property name="dalp.dist" value="${build.dir}/dalp/${application.name}.dalp"/>
-        <property name="deployment.dir" location="${dist.dir}"/>
-        <patternset id="deployment.patternset">
-            <include name="${dist.jar}"/>
-            <include name="${application.name}.dalp"/>
-            <include name="lib/*"/>
-        </patternset>
-    </target>
-    <!--semc-init-->
-    <target name="semc-pre-init" if="cdc-platform.trigger">
-        <condition property="semc-platform.trigger">
-            <equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
-        </condition>
-    </target>
-    <target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
-        <condition property="semc.icon.invalid" value="true">
-            <or>
-                <contains string="${semc.application.icon}" substring="$${"/>
-                <equals arg1="${semc.application.icon}" arg2="" trim="true"/>
-            </or>
-        </condition>
-        <condition property="no.certificateorkey" value="true">
-            <or>
-                <isset property="no.application.uid"/>
-                <equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
-                <contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
-                <equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
-                <contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
-            </or>
-        </condition>
-        <property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
-        <taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
-            <classpath>
-                <pathelement path="${libs.cdc-ant-utils.classpath}"/>
-            </classpath>
-        </taskdef>
-        <taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
-            <classpath>
-                <pathelement path="${libs.semc-ant-utils.classpath}"/>
-            </classpath>
-        </taskdef>
-        <property name="deployment.dir" location="${dist.dir}"/>
-        <patternset id="deployment.patternset">
-            <include name="*.sis"/>
-            <include name="*.SIS"/>
-        </patternset>
-    </target>
-    <!--savaje-init-->
-    <target name="savaje-pre-init" if="cdc-platform.trigger">
-        <condition property="savaje-platform.trigger">
-            <equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
-        </condition>
-    </target>
-    <target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
-        <property name="savaje.application.uid" value="TBD"/>
-        <condition property="savaje.bundle.base.invalid" value="true">
-            <or>
-                <equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
-                <contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
-            </or>
-        </condition>
-        <condition property="savaje.unsupported.main" value="true">
-            <or>
-                <equals arg1="${main.class.applet}" arg2="true"/>
-            </or>
-        </condition>
-        <condition property="savaje.icon.invalid" value="true">
-            <or>
-                <isset property="no.application.uid"/>
-                <contains string="${savaje.application.icon}" substring="$${"/>
-                <equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
-            </or>
-        </condition>
-        <property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
-        <property name="deployment.dir" location="${dist.dir}"/>
-        <patternset id="deployment.patternset">
-            <include name="bundle.jnlp"/>
-            <include name="bundle.policy"/>
-            <include name="lib/*"/>
-        </patternset>
-    </target>
-    <!--nokiaS80-init-->
-    <target name="nokiaS80-pre-init" if="cdc-platform.trigger">
-        <condition property="nokiaS80-platform.trigger">
-            <equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
-        </condition>
-    </target>
-    <target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
-        <property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
-        <property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
-        <condition property="nokia.icon.invalid">
-            <or>
-                <contains string="${nokiaS80.application.icon}" substring="$${"/>
-                <equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
-            </or>
-        </condition>
-        <property name="deployment.dir" location="${dist.dir}"/>
-        <patternset id="deployment.patternset">
-            <include name="${dist.jar}"/>
-        </patternset>
-    </target>
-    <!--nsicom-init-->
-    <target name="nsicom-pre-init" if="cdc-platform.trigger">
-        <condition property="nsicom-platform.trigger">
-            <equals arg1="nsicom" arg2="${platform.type}" casesensitive="false"/>
-        </condition>
-    </target>
-    <target name="nsicom-init" depends="nsicom-pre-init" if="nsicom-platform.trigger">
-        <property name="deployment.dir" location="${dist.dir}"/>
-        <patternset id="deployment.patternset">
-            <include name="${dist.jar}"/>
-        </patternset>
-    </target>
-    <!--init-->
-    <target name="pre-init"/>
-    <target name="post-init"/>
-    <target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,ricoh-init,semc-init,savaje-init,nokiaS80-init,nsicom-init,post-init"/>
-    <!--conditional clean-->
-    <target name="conditional-clean-init">
-        <uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
-            <srcfiles dir="nbproject">
-                <include name="project.properties"/>
-                <include name="buildimpl.xml"/>
-            </srcfiles>
-        </uptodate>
-    </target>
-    <target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
-        <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
-    </target>
-    <!--deps-jar-->
-    <target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
-    <!--preprocess-->
-    <target name="pre-preprocess"/>
-    <target name="do-preprocess" unless="no.preprocess">
-        <fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
-        <property name="abilities" value=""/>
-        <property name="debug.level" value="debug"/>
-        <mkdir dir="${preprocessed.dir}"/>
-        <echo message="ignore me" file="${build.dir}/.timestamp"/>
-        <nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
-            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
-        </nb-prep>
-        <copy todir="${preprocessed.dir}">
-            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
-        </copy>
-        <nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
-    </target>
-    <target name="post-preprocess"/>
-    <target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
-    <!--compile-->
-    <target name="pre-compile"/>
-    <target name="do-compile">
-        <fail unless="build.classes.dir">Must set build.classes.dir</fail>
-        <mkdir dir="${build.classes.dir}"/>
-        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
-            <classpath>
-                <path path="${libs.classpath}"/>
-            </classpath>
-        </javac>
-        <copy todir="${build.classes.dir}">
-            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
-        </copy>
-        <nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
-    </target>
-    <target name="extract-libs" description="Extracts all bundled libraries.">
-        <mkdir dir="${build.classes.dir}"/>
-        <nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
-    </target>
-    <target name="post-compile"/>
-    <target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
-    <!--compile-single-->
-    <target name="pre-compile-single"/>
-    <target name="do-compile-single">
-        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
-        <mkdir dir="${build.classes.dir}"/>
-        <javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
-            <classpath>
-                <path path="${libs.classpath}"/>
-            </classpath>
-        </javac>
-    </target>
-    <target name="post-compile-single"/>
-    <target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
-    <!--proguard-->
-    <target name="proguard-init" description="Up-to-date check before obfuscation.">
-        <property name="obfuscation.level" value="0"/>
-        <condition property="no.obfusc">
-            <or>
-                <equals arg1="${obfuscation.level}" arg2="0"/>
-                <uptodate targetfile="${obfuscator.destjar}">
-                    <srcfiles dir="${buildsystem.baton}"/>
-                </uptodate>
-            </or>
-        </condition>
-        <uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
-            <srcfiles dir="${buildsystem.baton}"/>
-        </uptodate>
-    </target>
-    <target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
-        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
-        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
-    </target>
-    <target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
-        <fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
-        <fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
-        <fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
-        <property name="obfuscator.classpath" value=""/>
-        <dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
-        <dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
-        <mkdir dir="${obfuscator.srcjar.dir}"/>
-        <mkdir dir="${obfuscator.destjar.dir}"/>
-        <jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
-        <property name="obfuscation.custom" value=""/>
-        <nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
-        <mkdir dir="${obfuscated.classes.dir}"/>
-        <unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
-        <nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
-    </target>
-    <!--obfuscate-->
-    <target name="pre-obfuscate"/>
-    <target name="post-obfuscate"/>
-    <target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
-    <!--preverify-->
-    <target name="pre-preverify"/>
-    <target name="do-preverify" if="cldc-platform.trigger">
-        <fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
-        <mkdir dir="${preverify.sources.dir}"/>
-        <copy todir="${preverify.sources.dir}">
-            <fileset dir="${buildsystem.baton}" includes="**/*.class"/>
-        </copy>
-        <mkdir dir="${preverify.classes.dir}"/>
-        <nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
-        <copy todir="${preverify.classes.dir}">
-            <fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
-        </copy>
-        <nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
-    </target>
-    <target name="post-preverify"/>
-    <target name="preverify" depends="obfuscate,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
-    <!--set-password-->
-    <target name="set-password-init">
-        <property name="sign.enabled" value="false"/>
-        <condition property="skip-sign-keystore-password-input">
-            <or>
-                <isfalse value="${sign.enabled}"/>
-                <and>
-                    <isset property="sign.keystore"/>
-                    <isset property="sign.keystore.password"/>
-                    <not>
-                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
-                    </not>
-                    <not>
-                        <equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
-                    </not>
-                </and>
-            </or>
-        </condition>
-        <condition property="skip-sign-alias-password-input">
-            <or>
-                <isfalse value="${sign.enabled}"/>
-                <and>
-                    <isset property="sign.keystore"/>
-                    <isset property="sign.alias"/>
-                    <isset property="sign.alias.password"/>
-                    <not>
-                        <equals arg1="${sign.keystore}" arg2="" trim="true"/>
-                    </not>
-                    <not>
-                        <equals arg1="${sign.alias}" arg2="" trim="true"/>
-                    </not>
-                    <not>
-                        <equals arg1="${sign.alias.password}" arg2="" trim="true"/>
-                    </not>
-                </and>
-            </or>
-        </condition>
-    </target>
-    <target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
-        <nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
-    </target>
-    <target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
-        <nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
-    </target>
-    <target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
-    <!--create JAD-->
-    <target name="add-configuration" unless="contains.manifest.configuration">
-        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
-</nb-output>
-        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
-</nb-output>
-    </target>
-    <target name="add-profile" unless="contains.manifest.profile">
-        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
-</nb-output>
-        <nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
-</nb-output>
-    </target>
-    <target name="create-jad" if="cldc-platform.trigger">
-        <fail unless="dist.jad">Must set dist.jad</fail>
-        <mkdir dir="${build.dir}"/>
-        <dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
-        <mkdir dir="${dist.jad.dir}"/>
-        <condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
-            <not>
-                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
-            </not>
-        </condition>
-        <condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
-            <not>
-                <equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
-            </not>
-        </condition>
-        <condition property="contains.manifest.configuration">
-            <contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
-        </condition>
-        <condition property="contains.manifest.profile">
-            <contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
-        </condition>
-        <property value="" name="evaluated.manifest.apipermissions"/>
-        <property value="" name="evaluated.manifest.pushregistry"/>
-        <property name="manifest.jad" value=""/>
-        <property name="manifest.manifest" value=""/>
-        <nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
-        <nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
-        <antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
-        <antcall target="add-profile" inheritall="true" inheritrefs="true"/>
-        <property name="manifest.available" value="true"/>
-    </target>
-    <!--do-extra-libs-->
-    <target name="do-extra-libs" if="extra.classpath">
-        <property name="dist.lib.dir" value="${dist.dir}/lib"/>
-        <mkdir dir="${dist.lib.dir}"/>
-        <copypath destdir="${dist.lib.dir}" path="${extra.classpath}">
-            <flattenmapper/>
-        </copypath>
-    </target>
-    <!--nokiaS80-manifest-->
-    <target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
-        <fail message="Main class is not set!">
-            <condition>
-                <equals arg1="${main.class}" arg2="" trim="true"/>
-            </condition>
-        </fail>
-        <mkdir dir="${build.dir}/j9"/>
-        <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
-        <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
-        <copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
-        <property name="manifest.available" value="true"/>
-        <loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
-    </target>
-    <target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
-        <pathconvert property="logo.icon.name" pathsep=" ">
-            <path path="${nokiaS80.application.icon}"/>
-            <chainedmapper>
-                <flattenmapper/>
-                <globmapper from="*" to="*"/>
-            </chainedmapper>
-        </pathconvert>
-        <copy file="${nokiaS80.application.icon}" todir="${buildsystem.baton}"/>
-        <manifest file="${manifest.build.file}" mode="update">
-            <attribute name="Main-Class" value="${main.class}"/>
-            <attribute name="PproApp-Name" value="${application.name}"/>
-            <attribute name="PproApp-Vendor" value="${application.vendor}"/>
-            <attribute name="PproApp-Version" value="${deployment.number}"/>
-            <attribute name="PproApp-Icon" value="${logo.icon.name}"/>
-            <attribute name="x-ibm-pp-j9" value="${nokia.manifest.j9}"/>
-        </manifest>
-    </target>
-    <target name="nokiaS80-prepare-manifest-no-icon" depends="nokiaS80-prepare-j9" if="nokia.icon.invalid">
-        <manifest file="${manifest.build.file}" mode="update">
-            <attribute name="Main-Class" value="${main.class}"/>
-            <attribute name="PproApp-Name" value="${application.name}"/>
-            <attribute name="PproApp-Vendor" value="${application.vendor}"/>
-            <attribute name="PproApp-Version" value="${deployment.number}"/>
-            <attribute name="x-ibm-pp-j9" value="${nokia.manifest.j9}"/>
-        </manifest>
-    </target>
-    <target name="nokiaS80-create-manifest" depends="nokiaS80-prepare-j9,nokiaS80-prepare-manifest,nokiaS80-prepare-manifest-no-icon" if="nokiaS80-platform.trigger"/>
-    <!--semc-build-j9-->
-    <target name="semc-build-j9" if="semc-platform.trigger">
-        <epocpathsetter home="${platform.home}"/>
-        <property name="semc.application.caps" value=""/>
-        <mkdir dir="${platform.home}/epoc32/winscw/c/private/${semc.application.uid}"/>
-        <mkdir dir="${build.dir}/j9"/>
-        <fail message="Main class is not set!">
-            <condition>
-                <equals arg1="${main.class}" arg2="" trim="true"/>
-            </condition>
-        </fail>
-        <j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="${semc.application.uid}" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
-    </target>
-    <!--do-jar-->
-    <target name="do-jar" if="manifest.available">
-        <dirname file="${dist.dir}/${dist.jar}" property="dist.jar.dir"/>
-        <mkdir dir="${dist.jar.dir}"/>
-        <property name="manifest.build.file" location="${manifest.file}"/>
-        <jar compress="${jar.compress}" jarfile="${dist.dir}/${dist.jar}" manifest="${manifest.build.file}" manifestencoding="UTF-8">
-            <fileset dir="${buildsystem.baton}"/>
-        </jar>
-    </target>
-    <!--nsicom-create-manifest-->
-    <target name="nsicom-create-manifest" if="nsicom-platform.trigger">
-        <jar jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}" update="true">
-            <manifest>
-                <attribute name="Main-Class" value="${main.class}"/>
-            </manifest>
-        </jar>
-    </target>
-    <!--do-jar-no-manifest-->
-    <target name="do-jar-no-manifest" unless="manifest.available">
-        <dirname file="${dist.dir}/${dist.jar}" property="dist.jar.dir"/>
-        <mkdir dir="${dist.jar.dir}"/>
-        <jar compress="${jar.compress}" jarfile="${dist.dir}/${dist.jar}">
-            <fileset dir="${buildsystem.baton}"/>
-        </jar>
-    </target>
-    <!--update-jad-->
-    <target name="update-jad" if="cldc-platform.trigger">
-        <nb-jad jadfile="${dist.dir}/${dist.jad}" jarfile="${dist.dir}/${dist.jar}" url="${dist.jar}" sign="${sign.enabled}" keystore="${sign.keystore}" keystorepassword="${sign.keystore.password}" alias="${sign.alias}" aliaspassword="${sign.alias.password}" encoding="UTF-8"/>
-    </target>
-    <!--ricoh-init-dalp-->
-    <target name="ricoh-init-dalp" if="ricoh-platform.trigger">
-        <property name="ricoh.application.telephone" value=""/>
-        <property name="ricoh.application.fax" value=""/>
-        <property name="ricoh.application.email" value=""/>
-        <condition property="no.unmanaged.dalp">
-            <and>
-                <isfalse value="${ricoh.dalp.is-managed}"/>
-                <not>
-                    <available file="./${application.name}.dalp"/>
-                </not>
-            </and>
-        </condition>
-        <fail if="no.unmanaged.dalp" message="Dalp file ${application.name}.dalp is required in project directory when DALP management is set to off."/>
-        <condition property="no.vendor.name" value="true">
-            <equals arg1="${application.vendor}" arg2="" trim="true"/>
-        </condition>
-        <condition property="ricoh.icon.invalid" value="true">
-            <or>
-                <contains string="${ricoh.application.icon}" substring="$${"/>
-                <equals arg1="${ricoh.application.icon}" arg2="" trim="true"/>
-            </or>
-        </condition>
-        <mkdir dir="${dist.dir}/lib"/>
-    </target>
-    <!--ricoh-add-app-icon-->
-    <target name="ricoh-add-app-icon" depends="ricoh-init-dalp" if="ricoh-platform.trigger" unless="ricoh.icon.invalid">
-        <pathconvert property="icon.name" pathsep=" ">
-            <path path="${ricoh.application.icon}"/>
-            <chainedmapper>
-                <flattenmapper/>
-                <globmapper from="*" to="*"/>
-            </chainedmapper>
-        </pathconvert>
-        <jar jarfile="${dist.jar}" compress="${jar.compress}" update="true">
-            <fileset file="${ricoh.application.icon}"/>
-        </jar>
-    </target>
-    <!--ricoh-build-dalp-with-icon-->
-    <target name="ricoh-build-dalp-with-icon" depends="ricoh-add-app-icon" if="ricoh-platform.trigger" unless="ricoh.icon.invalid">
-        <mkdir dir="${build.dir}/dalp/"/>
-        <taskIf if="ricoh.dalp.is-managed" value="true">
-            <dalp file="${dalp.dist}" iconname="${icon.name}">
-                <fileset dir="${dist.dir}/lib"/>
-            </dalp>
-            <echo message="Managed dalp file ${dalp.dist} created w/ icon"/>
-        </taskIf>
-        <taskIf if="ricoh.dalp.is-managed" value="false">
-            <copy tofile="${dalp.dist}">
-                <fileset file="./${application.name}.dalp"/>
-            </copy>
-            <echo message="Non-managed dalp file ${dalp.dist} w/ icon imported"/>
-        </taskIf>
-    </target>
-    <!--ricoh-build-dalp-without-icon-->
-    <target name="ricoh-build-dalp-without-icon" if="ricoh.icon.invalid">
-        <mkdir dir="${build.dir}/dalp/"/>
-        <taskIf if="ricoh.dalp.is-managed" value="true">
-            <dalp file="${dalp.dist}">
-                <fileset dir="${dist.dir}/lib"/>
-            </dalp>
-            <echo message="Managed dalp file ${dalp.dist} created w/o icon"/>
-        </taskIf>
-        <taskIf if="ricoh.dalp.is-managed" value="false">
-            <copy tofile="${dalp.dist}">
-                <fileset file="./${application.name}.dalp"/>
-            </copy>
-            <echo message="Non-managed dalp file ${dalp.dist} w/o icon imported"/>
-        </taskIf>
-    </target>
-    <target name="ricoh-build-dalp" depends="ricoh-build-dalp-with-icon,ricoh-build-dalp-without-icon" if="ricoh-platform.trigger">
-        <copy todir="${dist.dir}" file="${dalp.dist}" overwrite="true"/>
-    </target>
-    <!--savaje-build-jnlp-->
-    <target name="savaje-prepare-icon" if="savaje-platform.trigger" unless="savaje.icon.invalid">
-        <pathconvert property="savaje.application.icon.name" pathsep=" ">
-            <path path="${savaje.application.icon}"/>
-            <chainedmapper>
-                <flattenmapper/>
-                <globmapper from="*" to="*"/>
-            </chainedmapper>
-        </pathconvert>
-        <mkdir dir="${dist.dir}/lib"/>
-        <copy tofile="${dist.dir}/lib/${savaje.application.icon.name}" file="${savaje.application.icon}" overwrite="true" failonerror="false"/>
-    </target>
-    <target name="savaje-build-jnlp" depends="savaje-prepare-icon" if="savaje-platform.trigger">
-        <mkdir dir="${build.dir}/jnlp/"/>
-        <taskdef resource="org/netbeans/modules/j2me/cdc/project/savaje/defs.properties">
-            <classpath>
-                <pathelement path="${libs.savaje-ant-utils.classpath}"/>
-            </classpath>
-        </taskdef>
-        <jnlp dir="${build.dir}/jnlp/" file="bundle.jnlp" codebase="WTK_AGUI" distjar="lib/${dist.jar.name}" applicationicon="lib/${savaje.application.icon.name}" smallicon="${savaje.application.icon.small}" focusedicon="${savaje.application.icon.focused}" applicationtitle="${application.name}" applicationvendor="${application.vendor}" applicationDescription="${application.description}" applicationArgs="${application.args}" mainClass="${main.class}" debug="${savaje.bundle.debug}" debugport="${savaje.bundle.debug.port}">
-            <fileset dir="${dist.dir}/lib"/>
-        </jnlp>
-        <policy file="${build.dir}/jnlp/bundle.policy" codebase="WTK_AGUI"/>
-        <copy tofile="${dist.dir}/lib/classes.jar" file="${dist.dir}/${dist.jar}" overwrite="true"/>
-        <copy todir="${dist.dir}" file="${build.dir}/jnlp/bundle.jnlp" overwrite="true"/>
-        <copy tofile="${dist.dir}/bundle.policy" file="${build.dir}/jnlp/bundle.policy" overwrite="true"/>
-        <copy todir="${dist.dir}/lib" overwrite="true" failonerror="false">
-            <fileset dir="${resources.dir}"/>
-        </copy>
-    </target>
-    <!--jar-->
-    <target name="pre-jar"/>
-    <target name="post-jar"/>
-    <target name="jar" depends="preverify,pre-jar,set-password,create-jad,do-extra-libs,nokiaS80-create-manifest,semc-build-j9,do-jar,nsicom-create-manifest,do-jar-no-manifest,update-jad,ricoh-build-dalp,savaje-build-jnlp,post-jar" description="Build jar and application descriptor."/>
-    <!--override-jad-->
-    <target name="override-jad" if="override.jarurl.trigger">
-        <property name="deployment.jarurl" value="${dist.jar}"/>
-        <nb-jad jadfile="${dist.dir}/${dist.jad}" jarfile="${dist.dir}/${dist.jar}" url="${deployment.jarurl}" sign="${sign.enabled}" keystore="${sign.keystore}" keystorepassword="${sign.keystore.password}" alias="${sign.alias}" aliaspassword="${sign.alias.password}" encoding="UTF-8"/>
-    </target>
-    <!--semc-make-sis-->
-    <target name="semc-ppro-arm" if="semc-platform.trigger" description="Builds neccessary files for semc device">
-        <exec executable="${platform.home}/epoc32/tools/create-ppro-app.bat" dir="${platform.home}/epoc32/tools/">
-            <arg value="arm"/>
-            <arg value="${application.name}"/>
-            <arg value="${semc.application.uid}"/>
-            <arg value="${j9.dist}"/>
-            <arg value="${semc.application.caps}"/>
-            <env key="SDKDRIVE" value="${sdkdrive}"/>
-            <env key="EPOCROOT" value="${epocroot}"/>
-            <env key="Path" value="${epocpath}"/>
-        </exec>
-    </target>
-    <target name="semc-make-sis-icon" if="semc-platform.trigger" unless="semc.icon.invalid">
-        <copy file="${semc.application.icon}" tofile="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}/${semc.application.uid}.mbm" failonerror="false"/>
-    </target>
-    <target name="semc-make-sis" depends="semc-ppro-arm,semc-make-sis-icon" if="semc-platform.trigger" unless="no.application.uid" description="Builds SIS file for device">
-        <property name="dll.dir" location="dll"/>
-        <mkdir dir="${dll.dir}"/>
-        <copy todir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}">
-            <fileset dir="${dist.dir}">
-                <exclude name="javadoc/**"/>
-            </fileset>
-        </copy>
-        <copy todir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}">
-            <fileset dir="${dll.dir}">
-                <include name="**/*.dll"/>
-            </fileset>
-        </copy>
-        <pkgmake workdir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}" id="${semc.application.uid}" appname="${application.name}" appicon="${semc.application.uid}.mbm" vendor="${application.vendor}" version="${deployment.number}" logo="${logo.image}" logoinstallonly="${logo.image.installonly}">
-            <fileset dir="${dist.dir}">
-                <exclude name="javadoc/**"/>
-            </fileset>
-            <fileset dir="${dll.dir}">
-                <include name="**/*.dll"/>
-            </fileset>
-        </pkgmake>
-        <exec executable="${platform.home}/epoc32/tools/makesis" dir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}">
-            <arg value="-d${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}"/>
-            <arg value="PProLauncher${semc.application.uid}.pkg"/>
-            <arg value="SYMBIAN.sis"/>
-            <env key="SDKDRIVE" value="${sdkdrive}"/>
-            <env key="EPOCROOT" value="${epocroot}"/>
-            <env key="Path" value="${epocpath}"/>
-        </exec>
-        <copy todir="${dist.dir}">
-            <fileset dir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}">
-                <include name="**/*.SIS"/>
-                <include name="**/*.sis"/>
-            </fileset>
-        </copy>
-    </target>
-    <target name="semc-sign-sis" if="semc-platform.trigger" depends="semc-make-sis" unless="no.certificateorkey" description="Sign SIS file">
-        <exec executable="${platform.home}/epoc32/tools/signsis" dir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}">
-            <arg value="-s"/>
-            <arg value="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}/SYMBIAN.sis"/>
-            <arg value="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}/SYMBIAN-SIGNED.sis"/>
-            <arg value="${semc.certificate.path}"/>
-            <arg value="${semc.private.key.path}"/>
-            <arg value="${semc.private.key.password}"/>
-            <env key="SDKDRIVE" value="${sdkdrive}"/>
-            <env key="EPOCROOT" value="${epocroot}"/>
-            <env key="Path" value="${epocpath}"/>
-        </exec>
-        <copy todir="${dist.dir}">
-            <fileset dir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}">
-                <include name="**/*.SIS"/>
-                <include name="**/*.sis"/>
-            </fileset>
-        </copy>
-    </target>
-    <target name="semc-no-sign-sis" depends="semc-make-sis" if="no.certificateorkey" unless="no.application.uid" description="Prints out only info when SIS is not signed ">
-        <echo message="Signed SIS was not created! Set up path to certificate and private key in project properties!"/>
-    </target>
-    <target name="semc-sis" if="semc-platform.trigger" depends="semc-sign-sis,semc-no-sign-sis" unless="no.application.uid"/>
-    <!--increment-app-version-->
-    <target name="increment-app-version" if="app-version.autoincrement.trigger">
-        <propertyfile file="nbproject/private/private.properties">
-            <entry key="deployment.counter" type="int" operation="+" default="2" pattern="0"/>
-            <entry key="deployment.number" value="000000${deployment.counter}"/>
-        </propertyfile>
-        <property name="deployment.number.pattern" value="\2\3.\5\6.\8\9"/>
-        <replaceregexp byline="true" file="nbproject/private/private.properties" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" replace="deployment.number=${deployment.number.pattern}"/>
-    </target>
-    <!--build-->
-    <target name="pre-build"/>
-    <target name="post-build"/>
-    <target name="build" depends="jar,pre-build,override-jad,semc-sis,increment-app-version,post-build" description="Builds final distribution of the application."/>
-    <!--cldc-run-->
-    <target name="cldc-run" if="cldc-platform.trigger">
-        <nb-run jadfile="${dist.dir}/${dist.jad}" jarfile="${dist.dir}/${dist.jar}" jadurl="${dist.jad.url}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" execmethod="${run.method}" securitydomain="${evaluated.run.security.domain}" commandline="${platform.runcommandline}" classpath="${platform.bootclasspath}:${dist.dir}/${dist.jar}" cmdoptions="${run.cmd.options}"/>
-    </target>
-    <!--ricoh-run-->
-    <target name="ricoh-run" if="ricoh-platform.trigger">
-        <copy todir="${platform.home}/mnt/sd3/sdk/dsdk/dist/${ricoh.application.uid}" overwrite="true">
-            <fileset dir="${dist.dir}">
-                <patternset refid="deployment.patternset"/>
-            </fileset>
-            <flattenmapper/>
-        </copy>
-        <ant antfile="${platform.home}/startemulator.xml" target="start_emulator" dir="${platform.home}">
-            <property name="emulator.skin" value="WVGA.xml"/>
-            <property name="emulator.autolaunchid" value="${ricoh.application.uid}"/>
-        </ant>
-    </target>
-    <!--semc-run-and-debug-prepare-targets-->
-    <target name="semc-icon-assembly" if="semc-platform.trigger" unless="semc.icon.invalid">
-        <copy file="${semc.application.icon}" tofile="${platform.home}/epoc32/release/winscw/udeb/z/Resource/Apps/${semc.application.uid}.mbm" failonerror="false"/>
-        <iconassembly home="${platform.home}" uid="${semc.application.uid}" count="${application.icon.count}"/>
-    </target>
-    <target name="semc-ppro-emulator" if="semc-platform.trigger" description="Builds neccessary files for semc emulator">
-        <exec executable="${platform.home}/epoc32/tools/create-ppro-app.bat" dir="${platform.home}/epoc32/tools/">
-            <arg value="win32"/>
-            <arg value="${application.name}"/>
-            <arg value="${semc.application.uid}"/>
-            <arg value="${j9.dist}"/>
-            <arg value="${semc.application.caps}"/>
-            <env key="SDKDRIVE" value="${sdkdrive}"/>
-            <env key="EPOCROOT" value="${epocroot}"/>
-            <env key="Path" value="${epocpath}"/>
-        </exec>
-    </target>
-    <target name="semc-do-run" if="semc-platform.trigger" description="Prepare log folders, copy necessary files">
-        <copy todir="${platform.home}/epoc32/winscw/C/private/${semc.application.uid}">
-            <fileset dir="${dist.dir}">
-                <exclude name="javadoc/**"/>
-            </fileset>
-        </copy>
-        <mkdir dir="${platform.home}/epoc32/winscw/c/logs/j9vm"/>
-        <epocinipath file="${platform.home}/epoc32/data/epoc.ini"/>
-        <exec executable="${platform.home}/epoc32/release/winscw/udeb/epoc.exe">
-            <env key="SDKDRIVE" value="${sdkdrive}"/>
-            <env key="EPOCROOT" value="${epocroot}"/>
-            <env key="Path" value="${epocpath}"/>
-        </exec>
-    </target>
-    <!--semc-run-->
-    <target name="semc-run" depends="semc-icon-assembly,semc-ppro-emulator,semc-do-run" if="semc-platform.trigger"/>
-    <!--savaje-run-->
-    <target name="savaje-run" if="savaje-platform.trigger">
-        <sunEmulatorExec home="${platform.home}" mainclass="${main.class}" args="${application.args}" jvmargs="${run.jvmargs}" device="${platform.device}" profile="${platform.profile}" xlet="${main.class.xlet}" applet="${main.class.applet}">
-            <fileset dir="${dist.dir}">
-                <exclude name="javadoc/**"/>
-            </fileset>
-        </sunEmulatorExec>
-    </target>
-    <!--nokiaS80-run-->
-    <target name="nokiaS80-run" if="nokiaS80-platform.trigger">
-        <mkdir dir="${platform.home}/epoc32/wins/c/PP_Applications"/>
-        <mkdir dir="${platform.home}/epoc32/wins/c/logs/j9vm"/>
-        <taskdef name="nokiaexec" classname="org.netbeans.modules.j2me.cdc.project.nokiaS80.NokiaEmulatorExecTask" classpath="${libs.nokiaS80-ant-utils.classpath}"/>
-        <nokiaexec jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" device="${platform.device}" xlet="${main.class.xlet}" applet="${main.class.applet}">
-            <fileset dir="${dist.dir}">
-                <exclude name="javadoc/**"/>
-            </fileset>
-        </nokiaexec>
-    </target>
-    <!--nsicom-run-->
-    <target name="nsicom-run" if="nsicom-platform.trigger">
-        <nsicomExecDeploy home="${platform.home}" mainclass="${main.class}" args="${application.args}" jvmargs="${run.jvmargs}" device="${platform.device}" profile="${platform.profile}" xlet="${main.class.xlet}" applet="${main.class.applet}" verbose="${nsicom.application.runverbose}" hostip="${nsicom.application.monitorhost}" runondevice="${nsicom.application.runremote}" remotevmlocation="${nsicom.remotevm.location}" remoteDataLocation="${nsicom.remoteapp.location}">
-            <fileset dir="${dist.dir}">
-                <exclude name="javadoc/**"/>
-            </fileset>
-        </nsicomExecDeploy>
-    </target>
-    <!--run-->
-    <target name="pre-run"/>
-    <target name="run" depends="jar,pre-run,cldc-run,ricoh-run,semc-run,savaje-run,nokiaS80-run,nsicom-run" description="Run MIDlet suite."/>
-    <target name="run-no-build" depends="init,pre-run,cldc-run,ricoh-run,semc-run,savaje-run,nokiaS80-run,nsicom-run" description="Quick Run already built MIDlet suite."/>
-    <!--cldc-debug-->
-    <target name="cldc-debug" if="cldc-platform.trigger">
-        <parallel>
-            <nb-run debug="true" debugsuspend="true" debugserver="true" debuggeraddressproperty="jpda.port" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadfile="${dist.dir}/${dist.jad}" jadurl="${dist.jad.url}" jarfile="${dist.dir}/${dist.jar}" execmethod="${run.method}" securitydomain="${evaluated.run.security.domain}" commandline="${platform.debugcommandline}" classpath="${platform.bootclasspath}:${dist.dir}/${dist.jar}" cmdoptions="${run.cmd.options}"/>
-            <sequential>
-                <sleep seconds="5"/>
-                <antcall target="nbdebug"/>
-            </sequential>
-        </parallel>
-    </target>
-    <!--ricoh-debug-->
-    <target name="ricoh-debug" if="ricoh-platform.trigger">
-        <copy todir="${platform.home}/mnt/sd3/sdk/dsdk/dist/${ricoh.application.uid}" overwrite="true">
-            <fileset dir="${dist.dir}">
-                <patternset refid="deployment.patternset"/>
-            </fileset>
-            <flattenmapper/>
-        </copy>
-        <parallel>
-            <ant antfile="${platform.home}/startemulator_debug.xml" target="debug_emulator" dir="${platform.home}">
-                <property name="emulator.skin" value="WVGA.xml"/>
-                <property name="emulator.autolaunchid" value="${ricoh.application.uid}"/>
-            </ant>
-            <sequential>
-                <sleep seconds="5"/>
-                <property name="jpda.port" value="8000"/>
-                <property name="debug.period" value="3000"/>
-                <property name="debug.timeout" value="30000"/>
-                <antcall target="nbdebug" inheritall="true" inheritrefs="true"/>
-            </sequential>
-        </parallel>
-    </target>
-    <!--semc-debug-->
-    <!--semc-build-j9-debug-->
-    <target name="semc-build-j9-debug" if="semc-platform.trigger">
-        <fail message="Main class is not set!">
-            <condition>
-                <equals arg1="${main.class}" arg2=""/>
-            </condition>
-        </fail>
-        <j9builder jvmargs="${run.jvmargs} -Xrunjdwp:server=n,address=${jpda.port}" mainclass="${main.class}" args="${application.args}" platform="${platform.type}" home="${platform.home}" dist="${j9.dist}" id="${semc.application.uid}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
-    </target>
-    <target name="semc-debug-start" if="semc-platform.trigger">
-        <nbjpdastart transport="dt_socket" addressproperty="jpda.port" name="${main.class}">
-            <classpath>
-                <path path="${build.classes.dir}"/>
-            </classpath>
-            <bootclasspath>
-                <path path="${platform.bootclasspath}"/>
-            </bootclasspath>
-        </nbjpdastart>
-    </target>
-    <target name="semc-debug" depends="semc-debug-start,semc-build-j9-debug,semc-icon-assembly,semc-ppro-emulator,semc-do-run" if="semc-platform.trigger"/>
-    <!--savaje-debug-->
-    <target name="savaje-debug" if="savaje-platform.trigger">
-        <parallel>
-            <sunEmulatorExec home="${platform.home}" mainclass="${main.class}" args="${application.args}" jvmargs="${run.jvmargs}" device="${platform.device}" profile="${platform.profile}" xlet="${main.class.xlet}" applet="${main.class.applet}" debug="true" debuggeraddressproperty="jpda.port">
-                <fileset dir="${dist.dir}">
-                    <exclude name="javadoc/**"/>
-                </fileset>
-            </sunEmulatorExec>
-            <sequential>
-                <sleep seconds="5"/>
-                <antcall target="nbdebug"/>
-            </sequential>
-        </parallel>
-    </target>
-    <!--nokiaS80-debug-->
-    <target name="nokiaS80-debug" if="nokiaS80-platform.trigger">
-        <taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
-        <j9builder jvmargs="${run.jvmargs} -Xrunjdwp:server=n,address=${jpda.port}" mainclass="${main.class}" args="${application.args}" platform="${platform.type}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
-        <mkdir dir="${platform.home}/epoc32/wins/c/logs/j9vm"/>
-        <taskdef name="nokiaexec" classname="org.netbeans.modules.j2me.cdc.project.nokiaS80.NokiaEmulatorExecTask" classpath="${libs.nokiaS80-ant-utils.classpath}"/>
-        <parallel>
-            <nokiaexec debug="true" debuggeraddressproperty="jpda.port" jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" device="${platform.device}" xlet="${main.class.xlet}" applet="${main.class.applet}">
-                <fileset dir="${dist.dir}">
-                    <exclude name="javadoc/**"/>
-                </fileset>
-            </nokiaexec>
-            <sequential>
-                <sleep seconds="10"/>
-                <antcall target="nbdebug"/>
-            </sequential>
-        </parallel>
-    </target>
-    <!--nsicom-debug-->
-    <target name="nsicom-debug" if="nsicom-platform.trigger">
-        <fail message="Debugging is not supported in this NSIcom VM version. Use monitoring facility instead!"/>
-    </target>
-    <!--debug-->
-    <target name="remove-timestamp">
-        <delete file="$/.timestamp"/>
-    </target>
-    <target name="pre-debug"/>
-    <target name="debug" description="Debug project." depends="clean,jar,remove-timestamp,pre-debug,cldc-debug,ricoh-debug,semc-debug,savaje-debug,nokiaS80-debug,nsicom-debug"/>
-    <target name="nbdebug" description="Start NetBeans debugger" if="netbeans.home">
-        <property name="debug.delay" value="5000"/>
-        <nb-mobility-debug address="${jpda.port}" name="${app.codename}" delay="${debug.delay}" timeout="30000" period="2000"/>
-    </target>
-    <!--javadoc-->
-    <target name="browse-javadoc" if="netbeans.home" unless="no.javadoc.preview">
-        <nbbrowse file="${dist.javadoc.dir}/index.html"/>
-    </target>
-    <target name="javadoc" depends="preprocess">
-        <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
-        <mkdir dir="${dist.javadoc.dir}"/>
-        <javadoc source="${javac.source}" destdir="${dist.javadoc.dir}" bootclasspath="${platform.bootclasspath}" notree="${javadoc.notree}" use="${javadoc.use}" nonavbar="${javadoc.nonavbar}" noindex="${javadoc.noindex}" splitindex="${javadoc.splitindex}" author="${javadoc.author}" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}" private="${javadoc.private}" encoding="${javac.encoding}" docencoding="${javac.encoding}" charset="${javac.encoding}">
-            <classpath>
-                <path path="${libs.classpath}"/>
-            </classpath>
-            <sourcepath>
-                <pathelement location="${buildsystem.baton}"/>
-            </sourcepath>
-        </javadoc>
-        <antcall target="browse-javadoc"/>
-    </target>
-    <!--clean and build-->
-    <target name="rebuild" depends="clean,build" description="Rebuild the application."/>
-    <target name="clean-timestamp">
-        <delete file="${build.dir}/.timestamp"/>
-    </target>
-    <target name="clean-preprocessed">
-        <delete dir="${preprocessed.dir}"/>
-    </target>
-    <target name="clean-classes">
-        <delete dir="${build.classes.dir}"/>
-    </target>
-    <target name="clean-obfuscated">
-        <delete file="${obfuscator.srcjar}"/>
-        <delete file="${obfuscator.destjar}"/>
-        <delete dir="${obfuscated.classes.dir}"/>
-    </target>
-    <target name="clean-preverified">
-        <delete dir="${preverify.sources.dir}"/>
-        <delete dir="${preverify.classes.dir}"/>
-    </target>
-    <target name="clean-manifest" if="manifest.build.file">
-        <delete file="${manifest.build.file}"/>
-    </target>
-    <target name="clean-jar">
-        <delete file="${dist.dir}/${dist.jar}"/>
-    </target>
-    <target name="clean-jad">
-        <delete file="${dist.dir}/${dist.jad}"/>
-    </target>
-    <target name="clean-javadoc">
-        <delete dir="${dist.javadoc.dir}"/>
-    </target>
-    <target name="clean-j9" if="j9.dist">
-        <delete file="${j9.dist}"/>
-    </target>
-    <target name="clean-ricoh" if="ricoh-platform.trigger">
-        <delete dir="${platform.home}/mnt/sd3/sdk/dsdk/dist/${ricoh.application.uid}"/>
-        <delete dir="${build.dir}/dalp"/>
-        <delete file="${dist.dir}/$.dalp"/>
-        <delete dir="${dist.dir}/lib"/>
-    </target>
-    <target name="clean-semc" if="semc-platform.trigger">
-        <delete dir="${dist.dir}" includes="*.sis,*.SIS"/>
-        <delete dir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/win32/PProLauncher${semc.application.uid}"/>
-        <delete dir="${platform.home}/epoc32/tools/ppro-custom-launcher/output/arm/PProLauncher${semc.application.uid}"/>
-        <delete file="${platform.home}/epoc32/release/winscw/udeb/PProLauncher${semc.application.uid}.exe"/>
-        <delete file="${platform.home}/epoc32/release/winscw/udeb/z/Resource/Apps/PProLauncher${semc.application.uid}.rsc"/>
-        <delete file="${platform.home}/epoc32/release/winscw/udeb/z/private/10003a3f/apps/PProLauncher${semc.application.uid}_reg.rsc"/>
-        <delete file="${platform.home}/epoc32/release/winscw/udeb/z/Resource/Apps/PProLauncher${semc.application.uid}_loc.R01"/>
-        <delete file="${platform.home}/epoc32/release/winscw/udeb/z/Resource/Apps/${semc.application.uid}.mbm"/>
-        <delete file="${platform.home}/epoc32/data/Z/private/10003a3f/apps/PProLauncher${semc.application.uid}_reg.rsc"/>
-        <delete file="${platform.home}/epoc32/data/Z/Resource/Apps/PProLauncher${semc.application.uid}.rsc"/>
-        <delete file="${platform.home}/epoc32/data/Z/Resource/Apps/PProLauncher${semc.application.uid}_loc.R01"/>
-        <delete dir="${platform.home}/epoc32/winscw/C/private/${semc.application.uid}"/>
-    </target>
-    <target name="clean-savaje" if="savaje-platform.trigger">
-        <delete dir="${build.dir}/jnlp"/>
-        <delete file="${dist.dir}/bundle.jnlp"/>
-        <delete file="${dist.dir}/bundle.policy"/>
-        <delete dir="${dist.dir}/lib"/>
-    </target>
-    <!--clean-->
-    <target name="pre-clean"/>
-    <target name="post-clean"/>
-    <target name="do-clean" depends="pre-clean,clean-timestamp,clean-preprocessed,clean-classes,clean-obfuscated,clean-preverified,clean-manifest,clean-jar,clean-jad,clean-javadoc,clean-j9,clean-ricoh,clean-semc,clean-savaje,post-clean"/>
-    <target name="clean" depends="conditional-clean" if="no.clean.before.build" description="Clean build products.">
-        <antcall target="do-clean" inheritall="true" inheritrefs="true"/>
-    </target>
-    <!--deploy-->
-    <target name="pre-deploy"/>
-    <target name="do-deploy" if="deployment.method" unless="skip.deployment">
-        <fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
-        <ant antfile="${deployment.scriptfile}" inheritall="true" inheritrefs="true"/>
-        <antcall target="post-deploy" inheritall="true" inheritrefs="true"/>
-    </target>
-    <target name="post-deploy"/>
-    <target name="deploy" depends="build,pre-deploy,do-deploy,post-deploy"/>
-    <!--for-all-configs targets-->
-    <target name="for-all-configs" depends="load-properties">
-        <fail unless="libs.ant-contrib.classpath">Classpath to Ant Contrib library (libs.ant-contrib.classpath property) is not set.</fail>
-        <property name="selected.configurations" value="${all.configurations}"/>
-        <taskdef resource="net/sf/antcontrib/antlib.xml">
-            <classpath>
-                <pathelement path="${libs.ant-contrib.classpath}"/>
-            </classpath>
-        </taskdef>
-        <for list="${selected.configurations}" param="cfg" keepgoing="true" trim="true">
-            <sequential>
-                <echo>Active project configuration: @{cfg}</echo>
-                <antcall target="${target.to.call}" inheritall="false" inheritrefs="false">
-                    <param name="config.active" value="@{cfg}"/>
-                    <propertyset>
-                        <propertyref name="no.deps"/>
-                    </propertyset>
-                </antcall>
-                <property name="no.deps" value="true"/>
-            </sequential>
-        </for>
-    </target>
-    <target name="jar-all">
-        <antcall target="for-all-configs">
-            <param name="target.to.call" value="jar"/>
-        </antcall>
-    </target>
-    <target name="build-all">
-        <antcall target="for-all-configs">
-            <param name="target.to.call" value="build"/>
-        </antcall>
-    </target>
-    <target name="javadoc-all">
-        <antcall target="for-all-configs">
-            <param name="target.to.call" value="javadoc"/>
-        </antcall>
-    </target>
-    <target name="deploy-all">
-        <antcall target="for-all-configs">
-            <param name="target.to.call" value="deploy"/>
-        </antcall>
-    </target>
-    <target name="rebuild-all">
-        <antcall target="for-all-configs">
-            <param name="target.to.call" value="rebuild"/>
-        </antcall>
-    </target>
-    <target name="clean-all">
-        <property file="nbproject/project.properties"/>
-        <fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
-        <fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
-        <delete dir="${build.root.dir}"/>
-        <delete dir="${dist.root.dir}"/>
-        <antcall target="for-all-configs">
-            <param name="target.to.call" value="clean"/>
-        </antcall>
-    </target>
-</project>