/*

* Copyright (c) 2006-2010 Nokia Corporation and/or its subsidiary(-ies). 

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  This module contains default beep sequences.

*

*/

#include "defaultbeep.rh"

#include <uikon.rh>

RESOURCE SEQ_LOOP ringtone

{

	repeats = 3;

	tones = 

	{

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_C1;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_C2;

			vol2		= SEQ_VOL_MP;

		},	

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_D1;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_B2;

			vol2		= SEQ_VOL_MP;

		},	

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_E1;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_C2;

			vol2		= SEQ_VOL_MP;

		},	

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_F1;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_C2;

			vol2		= SEQ_VOL_MP;

		},	

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_G1;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_C2;

			vol2		= SEQ_VOL_MP;

		},

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_A2;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_C2;

			vol2		= SEQ_VOL_MP;

		},	

		SEQ_2TONES

		{

			duration	= 1000 ;

			freq1		= SEQ_FREQ_B2;

			vol1		= SEQ_VOL_MP;

			freq2		= SEQ_FREQ_C2;

			vol2		= SEQ_VOL_MP;

		}		

	};

}

STRUCT VAR_ARRAY

	{

	WORD sequence [];

	}

RESOURCE VAR_ARRAY r_net_busy

	{

	// ETSI spec says 425Hz on 500ms, off 500ms.

	// Seems to be close but on/off time is 480ms. 

	sequence={0,17,10,5,6,78,50,64,50,6,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 5  = OPCODE_REPEAT

	// 6  = repeat 6 times sequence between OPCODE_REPEAT and OPCODE_REPEATEND  

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 50 = tone_tick = 500ms

	// 64-64=0=AUD_TONE_FREQ_OFF	     = 0Hz

	// 50 = tone_tick = 50ms

	// 6  = OPCODE_REPEATEND

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_reorder

	{

	// Don't know if this is defined in ETSI spec at all

	sequence={0,17,10,5,3,93,25,64,25,6,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 5  = OPCODE_REPEAT

	// 3  = repeat 3 times sequence between OPCODE_REPEAT and OPCODE_REPEATEND  

	// 93-64=29=AUD_TONE_RING_FREQ_E0	 = 330Hz

	// 25 = tone_tick = 250ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 25 = tone_tick = 250ms

	// 6  = OPCODE_REPEATEND

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_congestion

	{

	// ETSI spec says 425Hz on 200ms, off 200ms

	// Seems to be so (but repeated only 15 times):

	sequence={0,17,10,5,15,78,20,64,20,6,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 5  = OPCODE_REPEAT

	// 15  = repeat 15 times sequence between OPCODE_REPEAT and OPCODE_REPEATEND  

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 20 = tone_tick = 200ms

	// 6  = OPCODE_REPEATEND

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_special_information

	{

	sequence={0,17,10,5,3,79,33,80,33,81,33,64,50,64,50,6,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 5  = OPCODE_REPEAT

	// 3  = repeat 3 times sequence between OPCODE_REPEAT and OPCODE_REPEATEND  

	// 79-64=15=AUD_TONE_NETWORK_FREQ_2	 = 950Hz

	// 33 = tone_tick = 330ms

	// 80-64=16=AUD_TONE_NETWORK_FREQ_3	 = 1400Hz

	// 33 = tone_tick = 330ms

	// 81-64=17=AUD_TONE_NETWORK_FREQ_4	 = 1800Hz

	// 33 = tone_tick = 330ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 50 = tone_tick = 500ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 50 = tone_tick = 500ms  

	// 6  = OPCODE_REPEATEND

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_radio_not_available

	{

	// ETSI spec says: 425Mhz on 200ms, off 200ms, 3 bursts

	// Seems to be so:

	sequence={0,17,10,5,3,78,20,64,20,6,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 5  = OPCODE_REPEAT

	// 3  = repeat 3 times sequence between OPCODE_REPEAT and OPCODE_REPEATEND  

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1 = 425Hz

	// 20 = tone_tick = 200ms

	// 64-64=0=AUD_TONE_FREQ_OFF

	// 20 = tone_tick = 200ms

	// 6  = OPCODE_REPEATEND

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_ring_going

	{

	// ETSI spec says 425Hz Tone on 1s, silence 4s

	// Seems to be so:

	sequence={0,17,10,2,252,78,100,5,4,64,100,6,7,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 2  = OPCODE_CONTINUE_MASK (obsolete from DCT4 onwards)

	// 252 = continue mask value

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 100 = tone_tick = 1000ms

	// 5 = OPCODE_REPEAT

	// 4 = repeat 4 times sequence between OPCODE_REPEAT and OPCODE_REPEATEND

	// 64-64=0=AUD_TONE_FREQ_OFF

	// 100 = tone_tick = 1000ms

	// 7 = OPCODE_RESTART

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_call_waiting

	{

	// Seems to be so:

	sequence={0,17,10,78,20,64,60,78,20,64,100,64,100,64,100,78,20,64,60,78,20,11};

	// 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 60 = tone_tick = 600ms

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 100 = tone_tick = 1000ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 100 = tone_tick = 1000ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 100 = tone_tick = 1000ms

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF	 = 0Hz

	// 60 = tone_tick = 600ms

	// 78-64=14=AUD_TONE_NETWORK_FREQ_1	 = 425Hz

	// 20 = tone_tick = 200ms

	// 11 = OPCODE_END

	}

RESOURCE VAR_ARRAY r_net_call_waiting_alternative_tone

        {

        sequence={0,17,10,83,20,64,10,83,20,64,125,64,125,64,100,83,20,64,10,83,20,11};

        // 0  = OPCODE_SEQUENCE_START

	// 17 = OPCODE_DURATION_UNIT

	// 10 = duration unit => tone duration is 10ms * tone_tick

	// 83-64=19=AUD_TONE_NETWORK_DUAL_FREQ_2 = 440Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF         = 0Hz

	// 10 = tone_tick = 100ms

	// 83-64=19=AUD_TONE_NETWORK_DUAL_FREQ_2 = 440Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF         = 0Hz

	// 125 = tone_tick = 1250ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF         = 0Hz

	// 125 = tone_tick = 1250ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF         = 0Hz

	// 100 = tone_tick = 1000ms

	// 83-64=19=AUD_TONE_NETWORK_DUAL_FREQ_2 = 440Hz

	// 20 = tone_tick = 200ms

	// 64-64 = 0 = AUD_TONE_FREQ_OFF         = 0Hz

	// 10 = tone_tick = 100ms

	// 83-64=19=AUD_TONE_NETWORK_DUAL_FREQ_2 = 440Hz

	// 20 = tone_tick = 200ms

	// 11 = OPCODE_END

        }

RESOURCE VAR_ARRAY r_data_call_tone

	{

	sequence={0,17,6,2,252,10,8,5,8,84,3,89,3,6,10,247,64,50,7,11};

	}

RESOURCE VAR_ARRAY r_no_sound_sequence

	{

	sequence={0,17,6,5,252,10,8,64,50,10,247,64,100,06,11};

	}

RESOURCE VAR_ARRAY r_beep_sequence

	{

	sequence={0,17,6,10,8,115,10,64,40,10,247,5,252,64,100,10,8,64,50,10,247,6,11};

	}