diff -r 4ca382093dae -r 493058e57c8c networkingutils/ipadministrationtool/data/route.ini
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/networkingutils/ipadministrationtool/data/route.ini	Wed Sep 01 12:30:50 2010 +0100
@@ -0,0 +1,54 @@
+# Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).
+# All rights reserved.
+# This component and the accompanying materials are made available
+# under the terms of the License "Eclipse Public License v1.0"
+# which accompanies this distribution, and is available
+# at the URL "http://www.eclipse.org/legal/epl-v10.html".
+#
+# Initial Contributors:
+# Nokia Corporation - initial contribution.
+#
+# Contributors:
+#
+# Description:
+# //    route.ini - a configuration file for ipadm
+# THIS IS AN EXAMPLE FILE
+# This file should be located in C:\Data\IpAdm\route.ini.
+# This file is processed by IpAdm when you push the
+# Add Routes -button.
+# Each line starting with route-add followed by positional
+# parameters is directly used as a KSoInetAddRoute parameter:
+# route-add <dest> <netmask> <metric> <gateway> [interface]
+# If optional parameter interface is omitted, gateway address
+# determines the interface. With this command you can add static
+# routes into the routing table.
+# Some 6to4 route examples
+# route-add 2001:: ffff:: 1 2002:c171:3a50::c171:3a50
+# route-add 3ffe:: ffff:: 1 2002:c171:3a50::c171:3a50
+# route-add 2001:: ffff:: 1 2002:836b:4179::836b:4179
+# route-add 3ffe:: ffff:: 1 2002:836b:4179::836b:4179
+# Some other examples
+# route-add 172.21.40.1 255.255.254.0 1 - 172.21.40.106
+# route-add 3ffe:501:fffff:ff05:: ffff:ffff:ffff:ffff:: 1 3ffe:501:ffff:ff03:200:ff:fe00:a0a0 fe80::260:63ff:fe01:d6a9
+# To add a default route, use zero address and prefix
+# route-add :: :: 1 3ffe:501:ffff:ff03:200:ff:fe00:a0a0 fe80::260:63ff:fe01:d6a9
+# route-add 0.0.0.0 0.0.0.0 1 172.21.40.1 182.21.40.106
+# Similarly you can configure interfaces with ifconfig
+# ifconfig <if> <prefix> prefix <prefixlen> ["alias"] ["up"/"down"] ["delete"]
+# ifconfig ethernet 10.0.5.3 alias
+# ifconfig ethernet 3ffe:501:ffff:100:: prefix 64 alias
+# ifconfig ethernet fe80::200:ff:f00:a0a0 prefix 64 delete
+# ifconfig ethernet fe80::260:63ff:fe01:d6a9 prefix 64 up
+# If you want to initiate DAD on the fly you need to remove
+# all addresses of specific interface identifier from an interface
+# and then define a new interface identifier to be checked by DAD:
+# ifconfig ethernet 3ffe:501:ffff:100:200:ff:fe00:a0a0 prefix 64 delete
+# ifconfig ethernet fe80::200:ff:fe00:a0a0 prefix 64 delete
+# ifconfig ethernet fe80::260:63ff:fe01:d6a9 prefix 64 delete
+# ifconfig ethernet fe80::260:63ff:fe01:d6a9 prefix 64 up
+# The above method is handy for example when running the TAHI
+# stateless address autoconfiguration tests requiring frequently
+# all addresses to be removed and DAD to be performed for link-local
+# address. With EPOC you don't need to reboot, just have appropriate
+# settings in route.ini and push the Add Routes button in IpAdm.
+#