IJG JPEG LIBRARY:  SYSTEM ARCHITECTURE

Copyright (C) 1991-1995, Thomas G. Lane.

This file is part of the Independent JPEG Group's software.

For conditions of distribution and use, see the accompanying README file.

This file provides an overview of the architecture of the IJG JPEG software;

that is, the functions of the various modules in the system and the interfaces

between modules.  For more precise details about any data structure or calling

convention, see the include files and comments in the source code.

We assume that the reader is already somewhat familiar with the JPEG standard.

The README file includes references for learning about JPEG.  The file

libjpeg.doc describes the library from the viewpoint of an application

programmer using the library; it's best to read that file before this one.

Also, the file coderules.doc describes the coding style conventions we use.

In this document, JPEG-specific terminology follows the JPEG standard:

  A "component" means a color channel, e.g., Red or Luminance.

  A "sample" is a single component value (i.e., one number in the image data).

  A "coefficient" is a frequency coefficient (a DCT transform output number).

  A "block" is an 8x8 group of samples or coefficients.

  An "MCU" (minimum coded unit) is an interleaved set of blocks of size

	determined by the sampling factors, or a single block in a

	noninterleaved scan.

We do not use the terms "pixel" and "sample" interchangeably.  When we say

pixel, we mean an element of the full-size image, while a sample is an element

of the downsampled image.  Thus the number of samples may vary across

components while the number of pixels does not.  (This terminology is not used

rigorously throughout the code, but it is used in places where confusion would

otherwise result.)

*** System features ***

The IJG distribution contains two parts:

  * A subroutine library for JPEG compression and decompression.

  * cjpeg/djpeg, two sample applications that use the library to transform

    JFIF JPEG files to and from several other image formats.

cjpeg/djpeg are of no great intellectual complexity: they merely add a simple

command-line user interface and I/O routines for several uncompressed image

formats.  This document concentrates on the library itself.

We desire the library to be capable of supporting all JPEG baseline, extended

sequential, and progressive DCT processes.  Hierarchical processes are not

supported.

The library does not support the lossless (spatial) JPEG process.  Lossless

JPEG shares little or no code with lossy JPEG, and would normally be used

without the extensive pre- and post-processing provided by this library.

We feel that lossless JPEG is better handled by a separate library.

Within these limits, any set of compression parameters allowed by the JPEG

spec should be readable for decompression.  (We can be more restrictive about

what formats we can generate.)  Although the system design allows for all

parameter values, some uncommon settings are not yet implemented and may

never be; nonintegral sampling ratios are the prime example.  Furthermore,

we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a

run-time option, because most machines can store 8-bit pixels much more

compactly than 12-bit.

For legal reasons, JPEG arithmetic coding is not currently supported, but

extending the library to include it would be straightforward.

By itself, the library handles only interchange JPEG datastreams --- in

particular the widely used JFIF file format.  The library can be used by

surrounding code to process interchange or abbreviated JPEG datastreams that

are embedded in more complex file formats.  (For example, libtiff uses this

library to implement JPEG compression within the TIFF file format.)

The library includes a substantial amount of code that is not covered by the

JPEG standard but is necessary for typical applications of JPEG.  These

functions preprocess the image before JPEG compression or postprocess it after

decompression.  They include colorspace conversion, downsampling/upsampling,

and color quantization.  This code can be omitted if not needed.

A wide range of quality vs. speed tradeoffs are possible in JPEG processing,

and even more so in decompression postprocessing.  The decompression library

provides multiple implementations that cover most of the useful tradeoffs,

ranging from very-high-quality down to fast-preview operation.  On the

compression side we have generally not provided low-quality choices, since

compression is normally less time-critical.  It should be understood that the

low-quality modes may not meet the JPEG standard's accuracy requirements;

nonetheless, they are useful for viewers.

*** Portability issues ***

Portability is an essential requirement for the library.  The key portability

issues that show up at the level of system architecture are:

1.  Memory usage.  We want the code to be able to run on PC-class machines

with limited memory.  Images should therefore be processed sequentially (in

strips), to avoid holding the whole image in memory at once.  Where a

full-image buffer is necessary, we should be able to use either virtual memory

or temporary files.

2.  Near/far pointer distinction.  To run efficiently on 80x86 machines, the

code should distinguish "small" objects (kept in near data space) from

"large" ones (kept in far data space).  This is an annoying restriction, but

fortunately it does not impact code quality for less brain-damaged machines,

and the source code clutter turns out to be minimal with sufficient use of

pointer typedefs.

3. Data precision.  We assume that "char" is at least 8 bits, "short" and

"int" at least 16, "long" at least 32.  The code will work fine with larger

data sizes, although memory may be used inefficiently in some cases.  However,

the JPEG compressed datastream must ultimately appear on external storage as a

sequence of 8-bit bytes if it is to conform to the standard.  This may pose a

problem on machines where char is wider than 8 bits.  The library represents

compressed data as an array of values of typedef JOCTET.  If no data type

exactly 8 bits wide is available, custom data source and data destination

modules must be written to unpack and pack the chosen JOCTET datatype into

8-bit external representation.

*** System overview ***

The compressor and decompressor are each divided into two main sections:

the JPEG compressor or decompressor proper, and the preprocessing or

postprocessing functions.  The interface between these two sections is the

image data that the official JPEG spec regards as its input or output: this

data is in the colorspace to be used for compression, and it is downsampled

to the sampling factors to be used.  The preprocessing and postprocessing

steps are responsible for converting a normal image representation to or from

this form.  (Those few applications that want to deal with YCbCr downsampled

data can skip the preprocessing or postprocessing step.)

Looking more closely, the compressor library contains the following main

elements:

  Preprocessing:

    * Color space conversion (e.g., RGB to YCbCr).

    * Edge expansion and downsampling.  Optionally, this step can do simple

      smoothing --- this is often helpful for low-quality source data.

  JPEG proper:

    * MCU assembly, DCT, quantization.

    * Entropy coding (sequential or progressive, Huffman or arithmetic).

In addition to these modules we need overall control, marker generation,

and support code (memory management & error handling).  There is also a

module responsible for physically writing the output data --- typically

this is just an interface to fwrite(), but some applications may need to

do something else with the data.

The decompressor library contains the following main elements:

  JPEG proper:

    * Entropy decoding (sequential or progressive, Huffman or arithmetic).

    * Dequantization, inverse DCT, MCU disassembly.

  Postprocessing:

    * Upsampling.  Optionally, this step may be able to do more general

      rescaling of the image.

    * Color space conversion (e.g., YCbCr to RGB).  This step may also

      provide gamma adjustment [ currently it does not ].

    * Optional color quantization (e.g., reduction to 256 colors).

    * Optional color precision reduction (e.g., 24-bit to 15-bit color).

      [This feature is not currently implemented.]

We also need overall control, marker parsing, and a data source module.

The support code (memory management & error handling) can be shared with

the compression half of the library.

There may be several implementations of each of these elements, particularly

in the decompressor, where a wide range of speed/quality tradeoffs is very

useful.  It must be understood that some of the best speedups involve

merging adjacent steps in the pipeline.  For example, upsampling, color space

conversion, and color quantization might all be done at once when using a

low-quality ordered-dither technique.  The system architecture is designed to

allow such merging where appropriate.

Note: it is convenient to regard edge expansion (padding to block boundaries)

as a preprocessing/postprocessing function, even though the JPEG spec includes

it in compression/decompression.  We do this because downsampling/upsampling

can be simplified a little if they work on padded data: it's not necessary to

have special cases at the right and bottom edges.  Therefore the interface

buffer is always an integral number of blocks wide and high, and we expect

compression preprocessing to pad the source data properly.  Padding will occur

only to the next block (8-sample) boundary.  In an interleaved-scan situation,

additional dummy blocks may be used to fill out MCUs, but the MCU assembly and

disassembly logic will create or discard these blocks internally.  (This is

advantageous for speed reasons, since we avoid DCTing the dummy blocks.

It also permits a small reduction in file size, because the compressor can

choose dummy block contents so as to minimize their size in compressed form.

Finally, it makes the interface buffer specification independent of whether

the file is actually interleaved or not.)  Applications that wish to deal

directly with the downsampled data must provide similar buffering and padding

for odd-sized images.

*** Poor man's object-oriented programming ***

It should be clear by now that we have a lot of quasi-independent processing

steps, many of which have several possible behaviors.  To avoid cluttering the

code with lots of switch statements, we use a simple form of object-style

programming to separate out the different possibilities.

For example, two different color quantization algorithms could be implemented

as two separate modules that present the same external interface; at runtime,

the calling code will access the proper module indirectly through an "object".

We can get the limited features we need while staying within portable C.

The basic tool is a function pointer.  An "object" is just a struct

containing one or more function pointer fields, each of which corresponds to

a method name in real object-oriented languages.  During initialization we

fill in the function pointers with references to whichever module we have

determined we need to use in this run.  Then invocation of the module is done

by indirecting through a function pointer; on most machines this is no more

expensive than a switch statement, which would be the only other way of

making the required run-time choice.  The really significant benefit, of

course, is keeping the source code clean and well structured.

We can also arrange to have private storage that varies between different

implementations of the same kind of object.  We do this by making all the

module-specific object structs be separately allocated entities, which will

be accessed via pointers in the master compression or decompression struct.

The "public" fields or methods for a given kind of object are specified by

a commonly known struct.  But a module's initialization code can allocate

a larger struct that contains the common struct as its first member, plus

additional private fields.  With appropriate pointer casting, the module's

internal functions can access these private fields.  (For a simple example,

see jdatadst.c, which implements the external interface specified by struct

jpeg_destination_mgr, but adds extra fields.)

(Of course this would all be a lot easier if we were using C++, but we are

not yet prepared to assume that everyone has a C++ compiler.)

An important benefit of this scheme is that it is easy to provide multiple

versions of any method, each tuned to a particular case.  While a lot of

precalculation might be done to select an optimal implementation of a method,

the cost per invocation is constant.  For example, the upsampling step might

have a "generic" method, plus one or more "hardwired" methods for the most

popular sampling factors; the hardwired methods would be faster because they'd

use straight-line code instead of for-loops.  The cost to determine which

method to use is paid only once, at startup, and the selection criteria are

hidden from the callers of the method.

This plan differs a little bit from usual object-oriented structures, in that

only one instance of each object class will exist during execution.  The

reason for having the class structure is that on different runs we may create

different instances (choose to execute different modules).  You can think of

the term "method" as denoting the common interface presented by a particular

set of interchangeable functions, and "object" as denoting a group of related

methods, or the total shared interface behavior of a group of modules.

*** Overall control structure ***

We previously mentioned the need for overall control logic in the compression

and decompression libraries.  In IJG implementations prior to v5, overall

control was mostly provided by "pipeline control" modules, which proved to be

large, unwieldy, and hard to understand.  To improve the situation, the

control logic has been subdivided into multiple modules.  The control modules

consist of:

1. Master control for module selection and initialization.  This has two

responsibilities:

   1A.  Startup initialization at the beginning of image processing.

        The individual processing modules to be used in this run are selected

        and given initialization calls.

   1B.  Per-pass control.  This determines how many passes will be performed

        and calls each active processing module to configure itself

        appropriately at the beginning of each pass.  End-of-pass processing,

	where necessary, is also invoked from the master control module.

   Method selection is partially distributed, in that a particular processing

   module may contain several possible implementations of a particular method,

   which it will select among when given its initialization call.  The master

   control code need only be concerned with decisions that affect more than

   one module.

2. Data buffering control.  A separate control module exists for each

   inter-processing-step data buffer.  This module is responsible for

   invoking the processing steps that write or read that data buffer.

Each buffer controller sees the world as follows:

input data => processing step A => buffer => processing step B => output data

                      |              |               |

              ------------------ controller ------------------

The controller knows the dataflow requirements of steps A and B: how much data

they want to accept in one chunk and how much they output in one chunk.  Its

function is to manage its buffer and call A and B at the proper times.

A data buffer control module may itself be viewed as a processing step by a

higher-level control module; thus the control modules form a binary tree with

elementary processing steps at the leaves of the tree.

The control modules are objects.  A considerable amount of flexibility can

be had by replacing implementations of a control module.  For example:

* Merging of adjacent steps in the pipeline is done by replacing a control

  module and its pair of processing-step modules with a single processing-

  step module.  (Hence the possible merges are determined by the tree of

  control modules.)

* In some processing modes, a given interstep buffer need only be a "strip"

  buffer large enough to accommodate the desired data chunk sizes.  In other

  modes, a full-image buffer is needed and several passes are required.

  The control module determines which kind of buffer is used and manipulates

  virtual array buffers as needed.  One or both processing steps may be

  unaware of the multi-pass behavior.

In theory, we might be able to make all of the data buffer controllers

interchangeable and provide just one set of implementations for all.  In

practice, each one contains considerable special-case processing for its

particular job.  The buffer controller concept should be regarded as an

overall system structuring principle, not as a complete description of the

task performed by any one controller.

*** Compression object structure ***

Here is a sketch of the logical structure of the JPEG compression library:

                                                 |-- Colorspace conversion

                  |-- Preprocessing controller --|

                  |                              |-- Downsampling

Main controller --|

                  |                            |-- Forward DCT, quantize

                  |-- Coefficient controller --|

                                               |-- Entropy encoding

This sketch also describes the flow of control (subroutine calls) during

typical image data processing.  Each of the components shown in the diagram is

an "object" which may have several different implementations available.  One

or more source code files contain the actual implementation(s) of each object.

The objects shown above are:

* Main controller: buffer controller for the subsampled-data buffer, which

  holds the preprocessed input data.  This controller invokes preprocessing to

  fill the subsampled-data buffer, and JPEG compression to empty it.  There is

  usually no need for a full-image buffer here; a strip buffer is adequate.

* Preprocessing controller: buffer controller for the downsampling input data

  buffer, which lies between colorspace conversion and downsampling.  Note

  that a unified conversion/downsampling module would probably replace this

  controller entirely.

* Colorspace conversion: converts application image data into the desired

  JPEG color space; also changes the data from pixel-interleaved layout to

  separate component planes.  Processes one pixel row at a time.

* Downsampling: performs reduction of chroma components as required.

  Optionally may perform pixel-level smoothing as well.  Processes a "row

  group" at a time, where a row group is defined as Vmax pixel rows of each

  component before downsampling, and Vk sample rows afterwards (remember Vk

  differs across components).  Some downsampling or smoothing algorithms may

  require context rows above and below the current row group; the

  preprocessing controller is responsible for supplying these rows via proper

  buffering.  The downsampler is responsible for edge expansion at the right

  edge (i.e., extending each sample row to a multiple of 8 samples); but the

  preprocessing controller is responsible for vertical edge expansion (i.e.,

  duplicating the bottom sample row as needed to make a multiple of 8 rows).

* Coefficient controller: buffer controller for the DCT-coefficient data.

  This controller handles MCU assembly, including insertion of dummy DCT

  blocks when needed at the right or bottom edge.  When performing

  Huffman-code optimization or emitting a multiscan JPEG file, this

  controller is responsible for buffering the full image.  The equivalent of

  one fully interleaved MCU row of subsampled data is processed per call,

  even when the JPEG file is noninterleaved.

* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients.

  Works on one or more DCT blocks at a time.  (Note: the coefficients are now

  emitted in normal array order, which the entropy encoder is expected to

  convert to zigzag order as necessary.  Prior versions of the IJG code did

  the conversion to zigzag order within the quantization step.)

* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the

  coded data to the data destination module.  Works on one MCU per call.

  For progressive JPEG, the same DCT blocks are fed to the entropy coder

  during each pass, and the coder must emit the appropriate subset of

  coefficients.

In addition to the above objects, the compression library includes these

objects:

* Master control: determines the number of passes required, controls overall

  and per-pass initialization of the other modules.

* Marker writing: generates JPEG markers (except for RSTn, which is emitted

  by the entropy encoder when needed).

* Data destination manager: writes the output JPEG datastream to its final

  destination (e.g., a file).  The destination manager supplied with the

  library knows how to write to a stdio stream; for other behaviors, the

  surrounding application may provide its own destination manager.

* Memory manager: allocates and releases memory, controls virtual arrays

  (with backing store management, where required).

* Error handler: performs formatting and output of error and trace messages;

  determines handling of nonfatal errors.  The surrounding application may

  override some or all of this object's methods to change error handling.

* Progress monitor: supports output of "percent-done" progress reports.

  This object represents an optional callback to the surrounding application:

  if wanted, it must be supplied by the application.

The error handler, destination manager, and progress monitor objects are

defined as separate objects in order to simplify application-specific

customization of the JPEG library.  A surrounding application may override

individual methods or supply its own all-new implementation of one of these

objects.  The object interfaces for these objects are therefore treated as

part of the application interface of the library, whereas the other objects

are internal to the library.

The error handler and memory manager are shared by JPEG compression and

decompression; the progress monitor, if used, may be shared as well.

*** Decompression object structure ***

Here is a sketch of the logical structure of the JPEG decompression library:

                                               |-- Entropy decoding

                  |-- Coefficient controller --|

                  |                            |-- Dequantize, Inverse DCT

Main controller --|

                  |                               |-- Upsampling

                  |-- Postprocessing controller --|   |-- Colorspace conversion

                                                  |-- Color quantization

                                                  |-- Color precision reduction

As before, this diagram also represents typical control flow.  The objects

shown are:

* Main controller: buffer controller for the subsampled-data buffer, which

  holds the output of JPEG decompression proper.  This controller's primary

  task is to feed the postprocessing procedure.  Some upsampling algorithms

  may require context rows above and below the current row group; when this

  is true, the main controller is responsible for managing its buffer so as

  to make context rows available.  In the current design, the main buffer is

  always a strip buffer; a full-image buffer is never required.

* Coefficient controller: buffer controller for the DCT-coefficient data.

  This controller handles MCU disassembly, including deletion of any dummy

  DCT blocks at the right or bottom edge.  When reading a multiscan JPEG

  file, this controller is responsible for buffering the full image.

  (Buffering DCT coefficients, rather than samples, is necessary to support

  progressive JPEG.)  The equivalent of one fully interleaved MCU row of

  subsampled data is processed per call, even when the source JPEG file is

  noninterleaved.

* Entropy decoding: Read coded data from the data source module and perform

  Huffman or arithmetic entropy decoding.  Works on one MCU per call.

  For progressive JPEG decoding, the coefficient controller supplies the prior

  coefficients of each MCU (initially all zeroes), which the entropy decoder

  modifies in each scan.

* Dequantization and inverse DCT: like it says.  Note that the coefficients

  buffered by the coefficient controller have NOT been dequantized; we

  merge dequantization and inverse DCT into a single step for speed reasons.

  When scaled-down output is asked for, simplified DCT algorithms may be used

  that emit only 1x1, 2x2, or 4x4 samples per DCT block, not the full 8x8.

  Works on one DCT block at a time.

* Postprocessing controller: buffer controller for the color quantization

  input buffer, when quantization is in use.  (Without quantization, this

  controller just calls the upsampler.)  For two-pass quantization, this

  controller is responsible for buffering the full-image data.

* Upsampling: restores chroma components to full size.  (May support more

  general output rescaling, too.  Note that if undersized DCT outputs have

  been emitted by the DCT module, this module must adjust so that properly

  sized outputs are created.)  Works on one row group at a time.  This module

  also calls the color conversion module, so its top level is effectively a

  buffer controller for the upsampling->color conversion buffer.  However, in

  all but the highest-quality operating modes, upsampling and color

  conversion are likely to be merged into a single step.

* Colorspace conversion: convert from JPEG color space to output color space,

  and change data layout from separate component planes to pixel-interleaved.

  Works on one pixel row at a time.

* Color quantization: reduce the data to colormapped form, using either an

  externally specified colormap or an internally generated one.  This module

  is not used for full-color output.  Works on one pixel row at a time; may

  require two passes to generate a color map.  Note that the output will

  always be a single component representing colormap indexes.  In the current

  design, the output values are JSAMPLEs, so an 8-bit compilation cannot

  quantize to more than 256 colors.  This is unlikely to be a problem in

  practice.

* Color reduction: this module handles color precision reduction, e.g.,

  generating 15-bit color (5 bits/primary) from JPEG's 24-bit output.

  Not quite clear yet how this should be handled... should we merge it with

  colorspace conversion???

Note that some high-speed operating modes might condense the entire

postprocessing sequence to a single module (upsample, color convert, and

quantize in one step).

In addition to the above objects, the decompression library includes these

objects:

* Master control: determines the number of passes required, controls overall

  and per-pass initialization of the other modules.  This is subdivided into

  input and output control: jdinput.c controls only input-side processing,

  while jdmaster.c handles overall initialization and output-side control.

* Marker reading: decodes JPEG markers (except for RSTn).

* Data source manager: supplies the input JPEG datastream.  The source

  manager supplied with the library knows how to read from a stdio stream;

  for other behaviors, the surrounding application may provide its own source

  manager.

* Memory manager: same as for compression library.

* Error handler: same as for compression library.

* Progress monitor: same as for compression library.

As with compression, the data source manager, error handler, and progress

monitor are candidates for replacement by a surrounding application.

*** Decompression input and output separation ***

To support efficient incremental display of progressive JPEG files, the

decompressor is divided into two sections that can run independently: