|
1 /**************************************************************************** |
|
2 ** |
|
3 ** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). |
|
4 ** All rights reserved. |
|
5 ** Contact: Nokia Corporation (qt-info@nokia.com) |
|
6 ** |
|
7 ** This file is part of the test suite of the Qt Toolkit. |
|
8 ** |
|
9 ** $QT_BEGIN_LICENSE:LGPL$ |
|
10 ** No Commercial Usage |
|
11 ** This file contains pre-release code and may not be distributed. |
|
12 ** You may use this file in accordance with the terms and conditions |
|
13 ** contained in the Technology Preview License Agreement accompanying |
|
14 ** this package. |
|
15 ** |
|
16 ** GNU Lesser General Public License Usage |
|
17 ** Alternatively, this file may be used under the terms of the GNU Lesser |
|
18 ** General Public License version 2.1 as published by the Free Software |
|
19 ** Foundation and appearing in the file LICENSE.LGPL included in the |
|
20 ** packaging of this file. Please review the following information to |
|
21 ** ensure the GNU Lesser General Public License version 2.1 requirements |
|
22 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. |
|
23 ** |
|
24 ** In addition, as a special exception, Nokia gives you certain additional |
|
25 ** rights. These rights are described in the Nokia Qt LGPL Exception |
|
26 ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. |
|
27 ** |
|
28 ** If you have questions regarding the use of this file, please contact |
|
29 ** Nokia at qt-info@nokia.com. |
|
30 ** |
|
31 ** |
|
32 ** |
|
33 ** |
|
34 ** |
|
35 ** |
|
36 ** |
|
37 ** |
|
38 ** $QT_END_LICENSE$ |
|
39 ** |
|
40 ****************************************************************************/ |
|
41 |
|
42 |
|
43 #include <QtTest/QtTest> |
|
44 #include <qapplication.h> |
|
45 #include <q3accel.h> |
|
46 #include <qtextedit.h> |
|
47 #include <qmainwindow.h> |
|
48 #include <qstatusbar.h> |
|
49 #include <qstring.h> |
|
50 |
|
51 class AccelForm; |
|
52 QT_FORWARD_DECLARE_CLASS(QTextEdit) |
|
53 QT_FORWARD_DECLARE_CLASS(QMainWindow) |
|
54 |
|
55 //TESTED_CLASS= |
|
56 //TESTED_FILES= |
|
57 |
|
58 class tst_Q3Accel : public QObject |
|
59 { |
|
60 Q_OBJECT |
|
61 public: |
|
62 tst_Q3Accel(); |
|
63 virtual ~tst_Q3Accel(); |
|
64 |
|
65 |
|
66 public slots: |
|
67 void accelTrig1() { currentResult = Accel1Triggered; } |
|
68 void accelTrig2() { currentResult = Accel2Triggered; } |
|
69 void ambig1() { currentResult = Ambiguous; ambigResult = Accel1Triggered; } |
|
70 void ambig2() { currentResult = Ambiguous; ambigResult = Accel2Triggered; } |
|
71 void statusMessage( const QString& message ) { sbText = message; } |
|
72 |
|
73 public slots: |
|
74 void initTestCase(); |
|
75 private slots: |
|
76 void number_data(); |
|
77 void number(); |
|
78 void text_data(); |
|
79 void text(); |
|
80 void disabledItems(); |
|
81 void ambiguousItems(); |
|
82 void unicodeCompare(); |
|
83 void unicodeCompose(); |
|
84 |
|
85 protected: |
|
86 static int toButtons( int key ); |
|
87 void defElements(); |
|
88 void sendKeyEvents( int k1, QChar c1 = 0, int k2 = 0, QChar c2 = 0, int k3 = 0, QChar c3 = 0, int k4 = 0, QChar c4 = 0 ); |
|
89 void testElement(); |
|
90 |
|
91 enum Action { |
|
92 SetupAccel, |
|
93 TestAccel, |
|
94 ClearAll |
|
95 } currentAction; |
|
96 |
|
97 enum Widget { |
|
98 NoWidget, |
|
99 Accel1, |
|
100 Accel2 |
|
101 }; |
|
102 |
|
103 enum Result { |
|
104 NoResult, |
|
105 Accel1Triggered, |
|
106 Accel2Triggered, |
|
107 Ambiguous |
|
108 } currentResult; |
|
109 |
|
110 QMainWindow *mainW; |
|
111 Q3Accel *accel1; |
|
112 Q3Accel *accel2; |
|
113 QTextEdit *edit; |
|
114 QString sbText; |
|
115 Result ambigResult; |
|
116 }; |
|
117 |
|
118 // copied from qkeysequence.cpp |
|
119 const QString MacCtrl = QString(QChar(0x2318)); |
|
120 const QString MacMeta = QString(QChar(0x2303)); |
|
121 const QString MacAlt = QString(QChar(0x2325)); |
|
122 const QString MacShift = QString(QChar(0x21E7)); |
|
123 |
|
124 tst_Q3Accel::tst_Q3Accel(): mainW( 0 ) |
|
125 { |
|
126 } |
|
127 |
|
128 tst_Q3Accel::~tst_Q3Accel() |
|
129 { |
|
130 delete mainW; |
|
131 } |
|
132 |
|
133 void tst_Q3Accel::initTestCase() |
|
134 { |
|
135 currentResult = NoResult; |
|
136 mainW = new QMainWindow(0); |
|
137 mainW->setObjectName("main window"); |
|
138 mainW->setFixedSize( 100, 100 ); |
|
139 accel1 = new Q3Accel(mainW, "test_accel1" ); |
|
140 accel2 = new Q3Accel(mainW, "test_accel2" ); |
|
141 edit = new QTextEdit(mainW); |
|
142 edit->setObjectName("test_edit"); |
|
143 connect( accel1, SIGNAL(activated(int)), this, SLOT(accelTrig1()) ); |
|
144 connect( accel2, SIGNAL(activated(int)), this, SLOT(accelTrig2()) ); |
|
145 connect( accel1, SIGNAL(activatedAmbiguously(int)), this, SLOT(ambig1()) ); |
|
146 connect( accel2, SIGNAL(activatedAmbiguously(int)), this, SLOT(ambig2()) ); |
|
147 mainW->setCentralWidget( edit ); |
|
148 connect( mainW->statusBar(), SIGNAL(messageChanged(const QString&)), |
|
149 this, SLOT(statusMessage(const QString&)) ); |
|
150 qApp->setMainWidget( mainW ); |
|
151 mainW->show(); |
|
152 } |
|
153 |
|
154 int tst_Q3Accel::toButtons( int key ) |
|
155 { |
|
156 int result = 0; |
|
157 if ( key & Qt::SHIFT ) |
|
158 result |= Qt::ShiftModifier; |
|
159 if ( key & Qt::CTRL ) |
|
160 result |= Qt::ControlModifier; |
|
161 if ( key & Qt::META ) |
|
162 result |= Qt::MetaModifier; |
|
163 if ( key & Qt::ALT ) |
|
164 result |= Qt::AltModifier; |
|
165 return result; |
|
166 } |
|
167 |
|
168 void tst_Q3Accel::defElements() |
|
169 { |
|
170 QTest::addColumn<int>("theAction"); |
|
171 QTest::addColumn<int>("theTestWidget"); |
|
172 QTest::addColumn<QString>("theString"); |
|
173 QTest::addColumn<int>("the1Key"); |
|
174 QTest::addColumn<int>("the1Char"); |
|
175 QTest::addColumn<int>("the2Key"); |
|
176 QTest::addColumn<int>("the2Char"); |
|
177 QTest::addColumn<int>("the3Key"); |
|
178 QTest::addColumn<int>("the3Char"); |
|
179 QTest::addColumn<int>("the4Key"); |
|
180 QTest::addColumn<int>("the4Char"); |
|
181 QTest::addColumn<int>("theResult"); |
|
182 } |
|
183 |
|
184 void tst_Q3Accel::number() |
|
185 { |
|
186 testElement(); |
|
187 } |
|
188 void tst_Q3Accel::text() |
|
189 { |
|
190 testElement(); |
|
191 } |
|
192 // ------------------------------------------------------------------ |
|
193 // Number Elements -------------------------------------------------- |
|
194 // ------------------------------------------------------------------ |
|
195 void tst_Q3Accel::number_data() |
|
196 { |
|
197 defElements(); |
|
198 |
|
199 // Clear all |
|
200 QTest::newRow( "N00 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
201 |
|
202 //=========================================== |
|
203 // [Shift + key] on non-shift accels testing |
|
204 //=========================================== |
|
205 |
|
206 /* Testing Single Sequences |
|
207 Shift + Qt::Key_M on Qt::Key_M |
|
208 Qt::Key_M on Qt::Key_M |
|
209 Shift + Qt::Key_Plus on Qt::Key_Pluss |
|
210 Qt::Key_Plus on Qt::Key_Pluss |
|
211 */ |
|
212 QTest::newRow( "N001 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
213 << int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
214 QTest::newRow( "N001:Shift + M - [M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
215 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
216 QTest::newRow( "N001:M - [M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
217 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
218 |
|
219 QTest::newRow( "N001 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
220 << int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
221 QTest::newRow( "N001:Shift + + [+]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
222 << int(Qt::SHIFT) + int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
223 QTest::newRow( "N001:+ [+]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
224 << int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
225 |
|
226 QTest::newRow( "N001 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
227 |
|
228 /* Testing Single Sequences |
|
229 Shift + Qt::Key_M on Shift + Qt::Key_M |
|
230 Qt::Key_M on Shift + Qt::Key_M |
|
231 Shift + Qt::Key_Plus on Shift + Qt::Key_Pluss |
|
232 Qt::Key_Plus on Shift + Qt::Key_Pluss |
|
233 */ |
|
234 QTest::newRow( "N002 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
235 << int(Qt::SHIFT) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
236 QTest::newRow( "N002:Shift + M - [Shift + M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
237 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
238 QTest::newRow( "N002:M - [Shift + M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
239 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
240 |
|
241 QTest::newRow( "N002 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
242 << int(Qt::SHIFT) + int(Qt::Key_Plus) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
243 QTest::newRow( "N002:Shift + + [Shift + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
244 << int(Qt::SHIFT) + int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
245 QTest::newRow( "N002:+ [Shift + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
246 << int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
247 |
|
248 QTest::newRow( "N002 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
249 |
|
250 /* Testing Single Sequences |
|
251 Shift + Qt::Key_F1 on Qt::Key_F1 |
|
252 Qt::Key_F1 on Qt::Key_F1 |
|
253 */ |
|
254 QTest::newRow( "N003 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
255 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
256 QTest::newRow( "N003:Shift + F1 - [F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
257 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
258 QTest::newRow( "N003:F1 - [F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
259 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
260 |
|
261 QTest::newRow( "N003 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
262 |
|
263 /* Testing Single Sequences |
|
264 Shift + Qt::Key_F1 on Shift + Qt::Key_F1 |
|
265 Qt::Key_F1 on Shift + Qt::Key_F1 |
|
266 */ |
|
267 QTest::newRow( "N004 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
268 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
269 QTest::newRow( "N004:Shift + F1 - [Shift + F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
270 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
271 QTest::newRow( "N004:F1 - [Shift + F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
272 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
273 |
|
274 QTest::newRow( "N004 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
275 |
|
276 /* Testing Single Sequences |
|
277 Qt::Key_BackTab on Qt::Key_Tab |
|
278 Shift + Qt::Key_Tab on Qt::Key_Tab |
|
279 Qt::Key_Tab on Qt::Key_Tab |
|
280 */ |
|
281 QTest::newRow( "N005 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
282 << int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
283 QTest::newRow( "N005:BackTab - [Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
284 << int(Qt::Key_BackTab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
285 QTest::newRow( "N005:Shift + Tab - [Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
286 << int(Qt::SHIFT) + Qt::Key_Tab << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
287 QTest::newRow( "N005:Tab - [Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
288 << int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
289 |
|
290 QTest::newRow( "N005 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
291 |
|
292 /* Testing Single Sequences |
|
293 Qt::Key_BackTab on Shift + Qt::Key_Tab |
|
294 Shift + Qt::Key_Tab on Shift + Qt::Key_Tab |
|
295 Qt::Key_Tab on Shift + Qt::Key_Tab |
|
296 */ |
|
297 QTest::newRow( "N006 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
298 << int(Qt::SHIFT) + int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
299 QTest::newRow( "N006:BackTab - [Shift + Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
300 << int(Qt::SHIFT) + int(Qt::Key_BackTab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
301 QTest::newRow( "N006:Shift + Tab - [Shift + Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
302 << int(Qt::SHIFT) + int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
303 QTest::newRow( "N006:Tab - [Shift + Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
304 << int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
305 |
|
306 QTest::newRow( "N006 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
307 |
|
308 |
|
309 //=========================================== |
|
310 // [Shift + key] and [key] on accels with |
|
311 // and without modifiers |
|
312 //=========================================== |
|
313 |
|
314 /* Testing Single Sequences |
|
315 Qt::Key_F1 |
|
316 Shift + Qt::Key_F1 |
|
317 */ |
|
318 QTest::newRow( "N007 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
319 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
320 QTest::newRow( "N007 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
321 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
322 QTest::newRow( "N007:F1" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
323 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
324 QTest::newRow( "N007:Shift + F1" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
325 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
326 |
|
327 QTest::newRow( "N007 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
328 |
|
329 /* Testing Single Sequences |
|
330 Qt::Key_M |
|
331 Shift + Qt::Key_M |
|
332 Ctrl + Qt::Key_M |
|
333 Alt + Qt::Key_M |
|
334 */ |
|
335 QTest::newRow( "N01 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
336 << int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
337 QTest::newRow( "N02 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
338 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
339 QTest::newRow( "N03 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
340 << int(Qt::CTRL) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
341 QTest::newRow( "N04 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
342 << int(Qt::ALT) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
343 |
|
344 |
|
345 QTest::newRow( "N:Qt::Key_M" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
346 << int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
347 QTest::newRow( "N:Shift + Qt::Key_M" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
348 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
349 QTest::newRow( "N:Ctrl + Qt::Key_M" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
350 << int(Qt::CTRL) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
351 QTest::newRow( "N:Alt + Qt::Key_M" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
352 << int(Qt::ALT) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
353 |
|
354 /* Testing Single Sequence Ambiguity |
|
355 Qt::Key_M on accel2 |
|
356 */ |
|
357 QTest::newRow( "N05 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
358 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
359 QTest::newRow( "N:int(Qt::Key_M) on int(Accel2)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
360 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Ambiguous); |
|
361 |
|
362 /* Testing Single Specialkeys |
|
363 int(Qt::Key_aring) |
|
364 int(Qt::Key_Aring) |
|
365 UNICODE_ACCEL + int(Qt::Key_K) |
|
366 */ |
|
367 QTest::newRow( "N06 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
368 << int(Qt::Key_aring) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
369 QTest::newRow( "N08 - sA2" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
370 << int(Qt::UNICODE_ACCEL) + int(Qt::Key_K) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
371 |
|
372 QTest::newRow( "N:int(Qt::Key_aring)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
373 << int(Qt::Key_aring) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
374 QTest::newRow( "N:int(Qt::Key_aring) - Text Form" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
375 << int(Qt::Key_unknown) << 0xE5 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
376 QTest::newRow( "N:int(Qt::Key_Aring) - Text Form" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
377 << int(Qt::Key_unknown) << 0xC5 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
378 QTest::newRow( "N:UNICODE_ACCEL + int(Qt::Key_K)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
379 << int(Qt::UNICODE_ACCEL) + int(Qt::Key_K) << int('k') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
380 |
|
381 // Clear all |
|
382 QTest::newRow( "N09 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
383 |
|
384 /* Testing Multiple Sequences |
|
385 int(Qt::Key_M) |
|
386 int(Qt::Key_I), int(Qt::Key_M) |
|
387 Shift+int(Qt::Key_I), int(Qt::Key_M) |
|
388 */ |
|
389 QTest::newRow( "N10 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
390 << int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
391 QTest::newRow( "N11 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("") |
|
392 << int(Qt::Key_I) << 0 << int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
393 QTest::newRow( "N12 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("") |
|
394 << int(Qt::SHIFT) + int(Qt::Key_I) << 0 << int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
395 |
|
396 QTest::newRow( "N:int(Qt::Key_M) (2)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
397 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
398 QTest::newRow( "N:int(Qt::Key_I), int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
399 << int(Qt::Key_I) << int('i') << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
400 QTest::newRow( "N:Shift+int(Qt::Key_I), int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
401 << int(Qt::SHIFT) + int(Qt::Key_I) << int('I') << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
402 } |
|
403 |
|
404 // ------------------------------------------------------------------ |
|
405 // Text Elements ---------------------------------------------------- |
|
406 // ------------------------------------------------------------------ |
|
407 void tst_Q3Accel::text_data() |
|
408 { |
|
409 defElements(); |
|
410 // Clear all |
|
411 QTest::newRow( "T00 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
412 |
|
413 //=========================================== |
|
414 // [Shift + key] on non-shift accels testing |
|
415 //=========================================== |
|
416 |
|
417 /* Testing Single Sequences |
|
418 Shift + int(Qt::Key_M) on int(Qt::Key_M) |
|
419 int(Qt::Key_M) on int(Qt::Key_M) |
|
420 Shift + int(Qt::Key_Plus) on Qt::Key_Pluss |
|
421 int(Qt::Key_Plus) on Qt::Key_Pluss |
|
422 */ |
|
423 QTest::newRow( "T001 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("M") |
|
424 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
425 QTest::newRow( "T001:Shift + M - [M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
426 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
427 QTest::newRow( "T001:M - [M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
428 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
429 |
|
430 QTest::newRow( "T001 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("+") |
|
431 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
432 QTest::newRow( "T001:Shift + + [+]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
433 << int(Qt::SHIFT) + int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
434 QTest::newRow( "T001:+ [+]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
435 << int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
436 |
|
437 QTest::newRow( "T001 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
438 |
|
439 /* Testing Single Sequences |
|
440 Shift + int(Qt::Key_M) on Shift + int(Qt::Key_M) |
|
441 int(Qt::Key_M) on Shift + int(Qt::Key_M) |
|
442 Shift + int(Qt::Key_Plus) on Shift + Qt::Key_Pluss |
|
443 int(Qt::Key_Plus) on Shift + Qt::Key_Pluss |
|
444 Shift + Ctrl + int(Qt::Key_Plus) on Ctrl + Qt::Key_Pluss |
|
445 Ctrl + int(Qt::Key_Plus) on Ctrl + Qt::Key_Pluss |
|
446 */ |
|
447 QTest::newRow( "T002 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Shift+M") |
|
448 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
449 QTest::newRow( "T002:Shift + M - [Shift + M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
450 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
451 QTest::newRow( "T002:M - [Shift + M]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
452 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
453 |
|
454 QTest::newRow( "T002 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("Shift++") |
|
455 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
456 QTest::newRow( "T002:Shift + + [Shift + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
457 << int(Qt::SHIFT) + int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
458 QTest::newRow( "T002:+ [Shift + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
459 << int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
460 |
|
461 QTest::newRow( "T002 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
462 |
|
463 /* Testing Single Sequences |
|
464 Shift + Ctrl + int(Qt::Key_Plus) on Ctrl + int(Qt::Key_Plus) |
|
465 Ctrl + int(Qt::Key_Plus) on Ctrl + int(Qt::Key_Plus) |
|
466 int(Qt::Key_Plus) on Ctrl + int(Qt::Key_Plus) |
|
467 */ |
|
468 QTest::newRow( "T002b - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Ctrl++") |
|
469 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
470 QTest::newRow( "T002b:Shift + Ctrl + + [Ctrl + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
471 << int(Qt::SHIFT) + int(Qt::CTRL) + int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
472 QTest::newRow( "T002b:Ctrl + [Ctrl + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
473 << int(Qt::CTRL) + int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
474 QTest::newRow( "T002b: + [Ctrl + +]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
475 << int(Qt::Key_Plus) << int('+') << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
476 |
|
477 /* Testing Single Sequences |
|
478 Shift + int(Qt::Key_F1) on int(Qt::Key_F1) |
|
479 int(Qt::Key_F1) on int(Qt::Key_F1) |
|
480 */ |
|
481 QTest::newRow( "T003 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("F1") |
|
482 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
483 QTest::newRow( "T003:Shift + F1 - [F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
484 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
485 QTest::newRow( "T003:F1 - [F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
486 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
487 |
|
488 QTest::newRow( "T003 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
489 |
|
490 /* Testing Single Sequences |
|
491 Shift + int(Qt::Key_F1) on Shift + int(Qt::Key_F1) |
|
492 int(Qt::Key_F1) on Shift + int(Qt::Key_F1) |
|
493 */ |
|
494 QTest::newRow( "T004 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Shift+F1") |
|
495 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
496 QTest::newRow( "T004:Shift + F1 - [Shift + F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
497 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
498 QTest::newRow( "T004:F1 - [Shift + F1]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
499 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
500 |
|
501 QTest::newRow( "T004 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
502 |
|
503 /* Testing Single Sequences |
|
504 int(Qt::Key_BackTab) on int(Qt::Key_Tab) |
|
505 Shift + int(Qt::Key_Tab) on int(Qt::Key_Tab) |
|
506 int(Qt::Key_Tab) on int(Qt::Key_Tab) |
|
507 */ |
|
508 QTest::newRow( "T005 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Tab") |
|
509 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
510 QTest::newRow( "T005:BackTab - [Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
511 << int(Qt::Key_BackTab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
512 QTest::newRow( "T005:Shift + Tab - [Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
513 << int(Qt::SHIFT) + int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
514 QTest::newRow( "T005:Tab - [Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
515 << int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
516 |
|
517 QTest::newRow( "N005 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
518 |
|
519 /* Testing Single Sequences |
|
520 int(Qt::Key_BackTab) on Shift + int(Qt::Key_Tab) |
|
521 Shift + int(Qt::Key_Tab) on Shift + int(Qt::Key_Tab) |
|
522 int(Qt::Key_Tab) on Shift + int(Qt::Key_Tab) |
|
523 */ |
|
524 QTest::newRow( "T006 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Shift+Tab") |
|
525 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
526 QTest::newRow( "T006:BackTab - [Shift + Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
527 << int(Qt::SHIFT) + int(Qt::Key_BackTab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
528 QTest::newRow( "T006:Shift + Tab - [Shift + Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
529 << int(Qt::SHIFT) + int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
530 QTest::newRow( "T006:Tab - [Shift + Tab]" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
531 << int(Qt::Key_Tab) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
532 |
|
533 QTest::newRow( "T006 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
534 |
|
535 //=========================================== |
|
536 // [Shift + key] and [key] on accels with |
|
537 // and without modifiers |
|
538 //=========================================== |
|
539 |
|
540 /* Testing Single Sequences |
|
541 int(Qt::Key_F1) |
|
542 Shift + int(Qt::Key_F1) |
|
543 */ |
|
544 QTest::newRow( "T007 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("F1") |
|
545 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
546 QTest::newRow( "T007 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("Shift+F1") |
|
547 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
548 QTest::newRow( "T007:F1" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
549 << int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
550 QTest::newRow( "T007:Shift + F1" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
551 << int(Qt::SHIFT) + int(Qt::Key_F1) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
552 |
|
553 QTest::newRow( "T005 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
554 |
|
555 /* Testing Single Sequences |
|
556 int(Qt::Key_M) |
|
557 Shift + int(Qt::Key_M) |
|
558 Ctrl + int(Qt::Key_M) |
|
559 Alt + int(Qt::Key_M) |
|
560 */ |
|
561 QTest::newRow( "T01 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("M") |
|
562 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
563 QTest::newRow( "T02 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("Shift+M") |
|
564 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
565 QTest::newRow( "T03 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Ctrl+M") |
|
566 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
567 QTest::newRow( "T04 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("Alt+M") |
|
568 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
569 |
|
570 |
|
571 QTest::newRow( "T:int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
572 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
573 QTest::newRow( "T:Shift + int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
574 << int(Qt::SHIFT) + int(Qt::Key_M) << int('M') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
575 QTest::newRow( "T:Ctrl + int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
576 << int(Qt::CTRL) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
577 QTest::newRow( "T:Alt + int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
578 << int(Qt::ALT) + int(Qt::Key_M) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
579 |
|
580 /* Testing Single Sequence Ambiguity |
|
581 int(Qt::Key_M) on accel2 |
|
582 */ |
|
583 QTest::newRow( "T05 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("M") |
|
584 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
585 QTest::newRow( "T:int(Qt::Key_M) on int(Accel2)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
586 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Ambiguous); |
|
587 |
|
588 /* Testing Single Specialkeys |
|
589 int(Qt::Key_aring) |
|
590 int(Qt::Key_Aring) |
|
591 UNICODE_ACCEL + int(Qt::Key_K) |
|
592 */ |
|
593 /* see comments above on the #ifdef'ery */ |
|
594 QTest::newRow( "T06 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("\x0E5") |
|
595 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
596 QTest::newRow( "T08 - sA2" ) << int(SetupAccel) << int(Accel1) << QString("K") |
|
597 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
598 |
|
599 QTest::newRow( "T:int(Qt::Key_aring)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
600 << int(Qt::Key_aring) << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
601 QTest::newRow( "T:int(Qt::Key_aring) - Text Form" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
602 << int(Qt::Key_unknown) << 0xE5 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
603 QTest::newRow( "T:int(Qt::Key_Aring) - Text Form" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
604 << int(Qt::Key_unknown) << 0xC5 << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
605 QTest::newRow( "T:UNICODE_ACCEL + int(Qt::Key_K)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
606 << int(Qt::UNICODE_ACCEL) + int(Qt::Key_K) << int('k') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
607 |
|
608 // Clear all |
|
609 QTest::newRow( "T09 - clear" ) << int(ClearAll) <<0<<QString("")<<0<<0<<0<<0<<0<<0<<0<<0<<0; |
|
610 |
|
611 /* Testing Multiple Sequences |
|
612 int(Qt::Key_M) |
|
613 int(Qt::Key_I), int(Qt::Key_M) |
|
614 Shift+int(Qt::Key_I), int(Qt::Key_M) |
|
615 */ |
|
616 QTest::newRow( "T10 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("M") |
|
617 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
618 QTest::newRow( "T11 - sA2" ) << int(SetupAccel) << int(Accel2) << QString("I, M") |
|
619 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
620 QTest::newRow( "T12 - sA1" ) << int(SetupAccel) << int(Accel1) << QString("Shift+I, M") |
|
621 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << 0 << int(NoResult); |
|
622 |
|
623 QTest::newRow( "T:int(Qt::Key_M) (2)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
624 << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
625 QTest::newRow( "T:int(Qt::Key_I), int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
626 << int(Qt::Key_I) << int('i') << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << int(Accel2Triggered); |
|
627 QTest::newRow( "T:Shift+int(Qt::Key_I), int(Qt::Key_M)" ) << int(TestAccel) << int(NoWidget) << QString("") |
|
628 << int(Qt::SHIFT) + int(Qt::Key_I) << int('I') << int(Qt::Key_M) << int('m') << 0 << 0 << 0 << 0 << int(Accel1Triggered); |
|
629 } |
|
630 |
|
631 // ------------------------------------------------------------------ |
|
632 // Disabled Elements ------------------------------------------------ |
|
633 // ------------------------------------------------------------------ |
|
634 void tst_Q3Accel::disabledItems() |
|
635 { |
|
636 accel1->setEnabled( TRUE ); |
|
637 accel2->setEnabled( TRUE ); |
|
638 |
|
639 /* Testing Disabled Accel |
|
640 Qt::Key_M on A1 |
|
641 Shift + Qt::Key_M on A1 |
|
642 Qt::Key_M on A2 (disabled) |
|
643 Shift + Qt::Key_M on A2 (disabled) |
|
644 */ |
|
645 accel1->clear(); |
|
646 accel2->clear(); |
|
647 accel1->insertItem( QKeySequence("M") ); |
|
648 accel1->insertItem( QKeySequence("Shift+M") ); |
|
649 accel2->insertItem( QKeySequence("M") ); |
|
650 accel2->insertItem( QKeySequence("Shift+M") ); |
|
651 accel2->setEnabled( FALSE ); |
|
652 currentResult = NoResult; |
|
653 sendKeyEvents( Qt::Key_M, 'm' ); |
|
654 QCOMPARE( currentResult, Accel1Triggered ); |
|
655 currentResult = NoResult; |
|
656 sendKeyEvents( Qt::SHIFT+Qt::Key_M, 'M' ); |
|
657 QCOMPARE( currentResult, Accel1Triggered ); |
|
658 accel2->setEnabled( TRUE ); //PS! |
|
659 |
|
660 /* Testing Disabled Accel |
|
661 Qt::Key_M on A1 |
|
662 Shift + Qt::Key_M on A1 (disabled) |
|
663 Qt::Key_M on A2 (disabled) |
|
664 Shift + Qt::Key_M on A2 |
|
665 */ |
|
666 accel1->clear(); |
|
667 accel2->clear(); |
|
668 accel1->insertItem( QKeySequence("M") ); |
|
669 int i1 = accel1->insertItem( QKeySequence("Shift+M") ); |
|
670 int i2 = accel2->insertItem( QKeySequence("M") ); |
|
671 accel2->insertItem( QKeySequence("Shift+M") ); |
|
672 accel1->setItemEnabled( i1, FALSE ); |
|
673 accel2->setItemEnabled( i2, FALSE ); |
|
674 currentResult = NoResult; |
|
675 sendKeyEvents( Qt::Key_M, 'm' ); |
|
676 QCOMPARE( currentResult, Accel1Triggered ); |
|
677 currentResult = NoResult; |
|
678 sendKeyEvents( Qt::SHIFT+Qt::Key_M, 'M' ); |
|
679 QCOMPARE( currentResult, Accel2Triggered ); |
|
680 |
|
681 /* Testing Disabled Accel Items |
|
682 Qt::Key_F5 on A1 |
|
683 Shift + Qt::Key_F5 on A2 (disabled) |
|
684 */ |
|
685 accel1->clear(); |
|
686 accel2->clear(); |
|
687 i1 = accel1->insertItem( QKeySequence("F5") ); |
|
688 i2 = accel2->insertItem( QKeySequence("Shift+F5") ); |
|
689 accel1->setItemEnabled( i1, TRUE ); |
|
690 accel2->setItemEnabled( i2, FALSE ); |
|
691 currentResult = NoResult; |
|
692 sendKeyEvents( Qt::Key_F5, 0 ); |
|
693 QCOMPARE( currentResult, Accel1Triggered ); |
|
694 currentResult = NoResult; |
|
695 sendKeyEvents( Qt::SHIFT+Qt::Key_F5, 0 ); |
|
696 QCOMPARE( currentResult, NoResult ); |
|
697 |
|
698 /* Testing Disabled Accel |
|
699 Qt::Key_F5 on A1 |
|
700 Shift + Qt::Key_F5 on A2 (disabled) |
|
701 */ |
|
702 accel1->clear(); |
|
703 accel2->clear(); |
|
704 i1 = accel1->insertItem( QKeySequence("F5") ); |
|
705 i2 = accel2->insertItem( QKeySequence("Shift+F5") ); |
|
706 accel1->setEnabled( TRUE ); |
|
707 accel2->setEnabled( FALSE ); |
|
708 currentResult = NoResult; |
|
709 sendKeyEvents( Qt::Key_F5, 0 ); |
|
710 QCOMPARE( currentResult, Accel1Triggered ); |
|
711 currentResult = NoResult; |
|
712 sendKeyEvents( Qt::SHIFT+Qt::Key_F5, 0 ); |
|
713 QCOMPARE( currentResult, NoResult ); |
|
714 |
|
715 |
|
716 |
|
717 /* Testing Disabled Accel, and the corresponding statusbar feedback |
|
718 Ctrl + Qt::Key_K, Ctrl + Qt::Key_L on A1 |
|
719 Ctrl + Qt::Key_K, Ctrl + Qt::Key_M on A2 (disabled) |
|
720 */ |
|
721 accel1->clear(); |
|
722 accel2->clear(); |
|
723 i1 = accel1->insertItem( QKeySequence("Ctrl+K, Ctrl+L") ); |
|
724 i2 = accel2->insertItem( QKeySequence("Ctrl+K, Ctrl+M") ); |
|
725 accel1->setItemEnabled( i1, TRUE ); |
|
726 accel2->setItemEnabled( i2, FALSE ); |
|
727 currentResult = NoResult; |
|
728 sendKeyEvents( Qt::CTRL+Qt::Key_K, 0 ); |
|
729 sendKeyEvents( Qt::CTRL+Qt::Key_Q, 0 ); |
|
730 QCOMPARE( currentResult, NoResult ); |
|
731 #ifndef Q_WS_MAC |
|
732 QCOMPARE( sbText, QString("Ctrl+K, Ctrl+Q not defined") ); |
|
733 #else |
|
734 QCOMPARE(sbText, MacCtrl + "K, " + MacCtrl + "Q not defined"); |
|
735 #endif |
|
736 currentResult = NoResult; |
|
737 sendKeyEvents( Qt::CTRL+Qt::Key_K, 0 ); |
|
738 sendKeyEvents( Qt::CTRL+Qt::Key_M, 0 ); |
|
739 QCOMPARE( currentResult, NoResult ); |
|
740 QCOMPARE(sbText, QString()); |
|
741 currentResult = NoResult; |
|
742 sendKeyEvents( Qt::CTRL+Qt::Key_K, 0 ); |
|
743 sendKeyEvents( Qt::CTRL+Qt::Key_L, 0 ); |
|
744 QCOMPARE( currentResult, Accel1Triggered ); |
|
745 QCOMPARE(sbText, QString()); |
|
746 |
|
747 accel1->setEnabled( TRUE ); |
|
748 accel2->setEnabled( TRUE ); |
|
749 } |
|
750 |
|
751 // ------------------------------------------------------------------ |
|
752 // Ambiguous Elements ----------------------------------------------- |
|
753 // ------------------------------------------------------------------ |
|
754 void tst_Q3Accel::ambiguousItems() |
|
755 { |
|
756 accel1->setEnabled( TRUE ); |
|
757 accel2->setEnabled( TRUE ); |
|
758 |
|
759 /* Testing Disabled Accel |
|
760 Qt::Key_M on A1 |
|
761 Qt::Key_M on A2 |
|
762 */ |
|
763 accel1->clear(); |
|
764 accel2->clear(); |
|
765 accel1->insertItem( QKeySequence("M") ); |
|
766 accel2->insertItem( QKeySequence("M") ); |
|
767 currentResult = NoResult; |
|
768 sendKeyEvents( Qt::Key_M, 'm' ); |
|
769 QCOMPARE( currentResult, Ambiguous ); |
|
770 QCOMPARE( ambigResult, Accel1Triggered ); |
|
771 currentResult = NoResult; |
|
772 sendKeyEvents( Qt::Key_M, 'm' ); |
|
773 QCOMPARE( currentResult, Ambiguous ); |
|
774 QCOMPARE( ambigResult, Accel2Triggered ); |
|
775 currentResult = NoResult; |
|
776 sendKeyEvents( Qt::Key_M, 'm' ); |
|
777 QCOMPARE( currentResult, Ambiguous ); |
|
778 QCOMPARE( ambigResult, Accel1Triggered ); |
|
779 |
|
780 accel1->setEnabled( TRUE ); |
|
781 accel2->setEnabled( TRUE ); |
|
782 } |
|
783 |
|
784 // ------------------------------------------------------------------ |
|
785 // Unicode and non-unicode Elements --------------------------------- |
|
786 // ------------------------------------------------------------------ |
|
787 void tst_Q3Accel::unicodeCompare() |
|
788 { |
|
789 accel1->setEnabled( TRUE ); |
|
790 accel2->setEnabled( TRUE ); |
|
791 |
|
792 QKeySequence ks1("Ctrl+M"); |
|
793 QKeySequence ks2( Qt::CTRL+Qt::Key_M ); |
|
794 accel1->clear(); |
|
795 accel2->clear(); |
|
796 accel1->insertItem( ks1 ); |
|
797 accel2->insertItem( ks2 ); |
|
798 currentResult = NoResult; |
|
799 sendKeyEvents( Qt::CTRL+Qt::Key_M, 0 ); |
|
800 QCOMPARE( currentResult, Ambiguous ); |
|
801 // They _are_ ambiguous, so the QKeySequence operator== |
|
802 // should indicate the same |
|
803 QVERIFY( ks1 == ks2 ); |
|
804 QVERIFY( !(ks1 != ks2) ); |
|
805 } |
|
806 |
|
807 // ------------------------------------------------------------------ |
|
808 // Unicode composed keys using keypad, and number accels ------------ |
|
809 // ------------------------------------------------------------------ |
|
810 void tst_Q3Accel::unicodeCompose() |
|
811 { |
|
812 accel1->setEnabled( TRUE ); |
|
813 accel2->setEnabled( TRUE ); |
|
814 |
|
815 #if 0 |
|
816 //#if QT_VERSION >= 0x30200 |
|
817 accel1->clear(); |
|
818 accel2->clear(); |
|
819 accel1->insertItem( META+Qt::Key_9 ); |
|
820 edit->setFocus(); |
|
821 currentResult = NoResult; |
|
822 |
|
823 // Turn on unicode composing, and |
|
824 // compose a smileyface. ( 9786 = 0x263A ) |
|
825 QApplication::setMetaComposedUnicode(); |
|
826 QChar ch1( '9' ); |
|
827 QChar ch2( '7' ); |
|
828 QChar ch3( '8' ); |
|
829 QChar ch4( '6' ); |
|
830 QString s1( ch1 ); |
|
831 QString s2( ch2 ); |
|
832 QString s3( ch3 ); |
|
833 QString s4( ch4 ); |
|
834 QKeyEvent k1a( QEvent::AccelOverride, Qt::Key_9, ch1.row() ? 0 : ch1.cell(), Qt::MetaModifier + Qt::KeypadModifier, s1 ); |
|
835 QKeyEvent k1p( QEvent::KeyPress, Qt::Key_9, ch1.row() ? 0 : ch1.cell(), Qt::MetaModifier + Qt::KeypadModifier, s1 ); |
|
836 QKeyEvent k1r( QEvent::KeyRelease, Qt::Key_9, ch1.row() ? 0 : ch1.cell(), Qt::MetaModifier + Qt::KeypadModifier, s1 ); |
|
837 QKeyEvent k2a( QEvent::AccelOverride, Qt::Key_7, ch2.row() ? 0 : ch2.cell(), Qt::MetaModifier + Qt::KeypadModifier, s2 ); |
|
838 QKeyEvent k2p( QEvent::KeyPress, Qt::Key_7, ch2.row() ? 0 : ch2.cell(), Qt::MetaModifier + Qt::KeypadModifier, s2 ); |
|
839 QKeyEvent k2r( QEvent::KeyRelease, Qt::Key_7, ch2.row() ? 0 : ch2.cell(), Qt::MetaModifier + Qt::KeypadModifier, s2 ); |
|
840 QKeyEvent k3a( QEvent::AccelOverride, Qt::Key_8, ch3.row() ? 0 : ch3.cell(), Qt::MetaModifier + Qt::KeypadModifier, s3 ); |
|
841 QKeyEvent k3p( QEvent::KeyPress, Qt::Key_8, ch3.row() ? 0 : ch3.cell(), Qt::MetaModifier + Qt::KeypadModifier, s3 ); |
|
842 QKeyEvent k3r( QEvent::KeyRelease, Qt::Key_8, ch3.row() ? 0 : ch3.cell(), Qt::MetaModifier + Qt::KeypadModifier, s3 ); |
|
843 QKeyEvent k4a( QEvent::AccelOverride, Qt::Key_6, ch4.row() ? 0 : ch4.cell(), Qt::MetaModifier + Qt::KeypadModifier, s4 ); |
|
844 QKeyEvent k4p( QEvent::KeyPress, Qt::Key_6, ch4.row() ? 0 : ch4.cell(), Qt::MetaModifier + Qt::KeypadModifier, s4 ); |
|
845 QKeyEvent k4r( QEvent::KeyRelease, Qt::Key_6, ch4.row() ? 0 : ch4.cell(), Qt::MetaModifier + Qt::KeypadModifier, s4 ); |
|
846 QKeyEvent k5r( QEvent::KeyRelease, Qt::Key_Meta, 0, 0, "" ); |
|
847 QApplication::sendEvent( edit, &k1a ); |
|
848 QApplication::sendEvent( edit, &k1p ); |
|
849 QApplication::sendEvent( edit, &k1r ); |
|
850 QCOMPARE( currentResult, NoResult ); |
|
851 |
|
852 QApplication::sendEvent( edit, &k2a ); |
|
853 QApplication::sendEvent( edit, &k2p ); |
|
854 QApplication::sendEvent( edit, &k2r ); |
|
855 QCOMPARE( currentResult, NoResult ); |
|
856 |
|
857 QApplication::sendEvent( edit, &k3a ); |
|
858 QApplication::sendEvent( edit, &k3p ); |
|
859 QApplication::sendEvent( edit, &k3r ); |
|
860 QCOMPARE( currentResult, NoResult ); |
|
861 |
|
862 QApplication::sendEvent( edit, &k4a ); |
|
863 QApplication::sendEvent( edit, &k4p ); |
|
864 QApplication::sendEvent( edit, &k4r ); |
|
865 QCOMPARE( currentResult, NoResult ); |
|
866 |
|
867 QApplication::sendEvent( edit, &k5r ); |
|
868 // Unicode character is fully composed, and |
|
869 // shouldn't have triggered any accels |
|
870 QCOMPARE( currentResult, NoResult ); |
|
871 |
|
872 // Verify that the unicode character indeed |
|
873 // is composed |
|
874 QVERIFY( edit->text().length() == 1 ); |
|
875 QCOMPARE( (int)edit->text()[0].unicode(), 9786 ); |
|
876 |
|
877 sendKeyEvents( META+Qt::Key_9, 0 ); |
|
878 QCOMPARE( currentResult, Accel1Triggered ); |
|
879 #else |
|
880 QSKIP( "Unicode composing non-existant in Qt 3.y.z", SkipAll); |
|
881 #endif |
|
882 } |
|
883 |
|
884 // ------------------------------------------------------------------ |
|
885 // Element Testing ------------------------------------------------- |
|
886 // ------------------------------------------------------------------ |
|
887 void tst_Q3Accel::testElement() |
|
888 { |
|
889 #if 0 |
|
890 currentResult = NoResult; |
|
891 QFETCH( int, theAction ); |
|
892 QFETCH( int, theTestWidget ); |
|
893 QFETCH( QString, theString ); |
|
894 QFETCH( int, the1Key ); |
|
895 QFETCH( int, the1Char ); |
|
896 QFETCH( int, the2Key ); |
|
897 QFETCH( int, the2Char ); |
|
898 QFETCH( int, the3Key ); |
|
899 QFETCH( int, the3Char ); |
|
900 QFETCH( int, the4Key ); |
|
901 QFETCH( int, the4Char ); |
|
902 QFETCH( int, theResult ); |
|
903 |
|
904 Q3Accel *ac = 0; |
|
905 switch( theTestWidget ) { |
|
906 case Accel1: |
|
907 ac = accel1; |
|
908 break; |
|
909 case Accel2: |
|
910 ac = accel2; |
|
911 break; |
|
912 case NoWidget: |
|
913 default: |
|
914 ac = 0; |
|
915 } |
|
916 |
|
917 if ( theAction == ClearAll ) { |
|
918 // Clear all current accelerators |
|
919 accel1->clear(); |
|
920 accel2->clear(); |
|
921 QCOMPARE( TRUE, TRUE ); |
|
922 } else if ( theAction == SetupAccel ) { |
|
923 // Set up accelerator for next test |
|
924 QKeySequence ks; |
|
925 if ( QString(theString).isEmpty() ) { |
|
926 ks = QKeySequence( the1Key, the2Key, the3Key, the4Key ); |
|
927 } else { |
|
928 ks = QKeySequence( theString ); |
|
929 } |
|
930 ac->insertItem( ks ); |
|
931 QCOMPARE( TRUE, TRUE ); |
|
932 } else { |
|
933 // Send keyevents |
|
934 sendKeyEvents( the1Key, the1Char, |
|
935 the2Key, the2Char, |
|
936 the3Key, the3Char, |
|
937 the4Key, the4Char ); |
|
938 // Verify the result |
|
939 QCOMPARE( currentResult, theResult ); |
|
940 } |
|
941 #endif |
|
942 } |
|
943 |
|
944 void tst_Q3Accel::sendKeyEvents( int k1, QChar c1, int k2, QChar c2, int k3, QChar c3, int k4, QChar c4 ) |
|
945 { |
|
946 int b1 = toButtons( k1 ); |
|
947 int b2 = toButtons( k2 ); |
|
948 int b3 = toButtons( k3 ); |
|
949 int b4 = toButtons( k4 ); |
|
950 k1 &= ~Qt::MODIFIER_MASK; |
|
951 k2 &= ~Qt::MODIFIER_MASK; |
|
952 k3 &= ~Qt::MODIFIER_MASK; |
|
953 k4 &= ~Qt::MODIFIER_MASK; |
|
954 QKeyEvent ke( QEvent::Accel, k1, (Qt::KeyboardModifiers)b1, QString(c1) ); |
|
955 QApplication::sendEvent( mainW, &ke ); |
|
956 if ( k2 ) { |
|
957 QKeyEvent ke( QEvent::Accel, k2, k2, b2, QString(c2) ); |
|
958 QApplication::sendEvent( mainW, &ke ); |
|
959 } |
|
960 if ( k3 ) { |
|
961 QKeyEvent ke( QEvent::Accel, k3, k3, b3, QString(c3) ); |
|
962 QApplication::sendEvent( mainW, &ke ); |
|
963 } |
|
964 if ( k4 ) { |
|
965 QKeyEvent ke( QEvent::Accel, k4, k4, b4, QString(c4) ); |
|
966 QApplication::sendEvent( mainW, &ke ); |
|
967 } |
|
968 } |
|
969 |
|
970 QTEST_MAIN(tst_Q3Accel) |
|
971 #include "tst_q3accel.moc" |