--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/src/qt3support/network/q3url.cpp Mon Jan 11 14:00:40 2010 +0000
@@ -0,0 +1,1318 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights. These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3url.h"
+
+#ifndef QT_NO_URL
+
+#include "q3cstring.h"
+#include "qdir.h"
+
+QT_BEGIN_NAMESPACE
+
+// used by q3filedialog.cpp
+bool qt_resolve_symlinks = true;
+
+class Q3UrlPrivate
+{
+public:
+ QString protocol;
+ QString user;
+ QString pass;
+ QString host;
+ QString path, cleanPath;
+ QString refEncoded;
+ QString queryEncoded;
+ bool isValid;
+ int port;
+ bool cleanPathDirty;
+};
+
+/*!
+ Replaces backslashes with slashes and removes multiple occurrences
+ of slashes or backslashes if \c allowMultiple is false.
+*/
+
+static void slashify( QString& s, bool allowMultiple = true )
+{
+ bool justHadSlash = false;
+ for ( int i = 0; i < (int)s.length(); i++ ) {
+ if ( !allowMultiple && justHadSlash &&
+ ( s[ i ] == QLatin1Char('/') || s[ i ] == QLatin1Char('\\') ) ) {
+ s.remove( i, 1 );
+ --i;
+ continue;
+ }
+ if ( s[ i ] == QLatin1Char('\\') )
+ s[ i ] = QLatin1Char('/');
+#if defined (Q_WS_MAC9)
+ if ( s[ i ] == QLatin1Char(':') && (i == (int)s.length()-1 || s[ i + 1 ] != QLatin1Char('/') ) ) //mac colon's go away, unless after a protocol
+ s[ i ] = QLatin1Char('/');
+#endif
+ if ( s[ i ] == QLatin1Char('/') )
+ justHadSlash = true;
+ else
+ justHadSlash = false;
+ }
+}
+
+
+
+/*!
+ \class Q3Url
+ \brief The Q3Url class provides a URL parser and simplifies working with URLs.
+
+ \compat
+
+ The Q3Url class is provided for simple work with URLs. It can
+ parse, decode, encode, etc.
+
+ Q3Url works with the decoded path and encoded query in turn.
+
+ Example:
+
+ <tt>http://example.com:80/cgi-bin/test%20me.pl?cmd=Hello%20you</tt>
+
+ \table
+ \header \i Function \i Returns
+ \row \i \l protocol() \i "http"
+ \row \i \l host() \i "example.com"
+ \row \i \l port() \i 80
+ \row \i \l path() \i "/cgi-bin/test me.pl"
+ \row \i \l fileName() \i "test me.pl"
+ \row \i \l query() \i "cmd=Hello%20you"
+ \endtable
+
+ Example:
+
+ <tt>http://qt.nokia.com/doc/qdockarea.html#lines</tt>
+
+ \table
+ \header \i Function \i Returns
+ \row \i \l protocol() \i "http"
+ \row \i \l host() \i "qt.nokia.com"
+ \row \i \l fileName() \i "doc/qdockarea.html"
+ \row \i \l ref() \i "lines"
+ \endtable
+
+ The individual parts of a URL can be set with setProtocol(),
+ setHost(), setPort(), setPath(), setFileName(), setRef() and
+ setQuery(). A URL could contain, for example, an ftp address which
+ requires a user name and password; these can be set with setUser()
+ and setPassword().
+
+ Because path is always encoded internally you must not use "%00"
+ in the path, although this is okay (but not recommended) for the
+ query.
+
+ Q3Url is normally used like this:
+
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 0
+
+ You can then access and manipulate the various parts of the URL.
+
+ To make it easy to work with Q3Urls and QStrings, Q3Url implements
+ the necessary cast and assignment operators so you can do
+ following:
+
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 1
+
+ Use the static functions, encode() and decode() to encode or
+ decode a URL in a string. (They operate on the string in-place.)
+ The isRelativeUrl() static function returns true if the given
+ string is a relative URL.
+
+ If you want to use a URL to work on a hierarchical structure (e.g.
+ a local or remote filesystem), you might want to use the subclass
+ Q3UrlOperator.
+
+ \sa Q3UrlOperator
+*/
+
+
+/*!
+ Constructs an empty URL that is invalid.
+*/
+
+Q3Url::Q3Url()
+{
+ d = new Q3UrlPrivate;
+ d->isValid = false;
+ d->port = -1;
+ d->cleanPathDirty = true;
+}
+
+/*!
+ Constructs a URL by parsing the string \a url.
+
+ If you pass a string like "/home/qt", the "file" protocol is
+ assumed.
+*/
+
+Q3Url::Q3Url( const QString& url )
+{
+ d = new Q3UrlPrivate;
+ d->protocol = QLatin1String("file");
+ d->port = -1;
+ parse( url );
+}
+
+/*!
+ Copy constructor. Copies the data of \a url.
+*/
+
+Q3Url::Q3Url( const Q3Url& url )
+{
+ d = new Q3UrlPrivate;
+ *d = *url.d;
+}
+
+/*!
+ Returns true if \a url is relative; otherwise returns false.
+*/
+
+bool Q3Url::isRelativeUrl( const QString &url )
+{
+ int colon = url.find( QLatin1Char(':') );
+ int slash = url.find( QLatin1Char('/') );
+
+ return ( slash != 0 && ( colon == -1 || ( slash != -1 && colon > slash ) ) );
+}
+
+/*!
+ Constructs an URL taking \a url as the base (context) and
+ \a relUrl as a relative URL to \a url. If \a relUrl is not relative,
+ \a relUrl is taken as the new URL.
+
+ For example, the path of
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 2
+ will be "/qt/srource/qt-2.1.0.tar.gz".
+
+ On the other hand,
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 3
+ will result in a new URL, "ftp://ftp.qt.nokia.com/usr/local",
+ because "/usr/local" isn't relative.
+
+ Similarly,
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 4
+ will result in a new URL, with "/usr/local" as the path
+ and "file" as the protocol.
+
+ Normally it is expected that the path of \a url points to a
+ directory, even if the path has no slash at the end. But if you
+ want the constructor to handle the last part of the path as a file
+ name if there is no slash at the end, and to let it be replaced by
+ the file name of \a relUrl (if it contains one), set \a checkSlash
+ to true.
+*/
+
+Q3Url::Q3Url( const Q3Url& url, const QString& relUrl, bool checkSlash )
+{
+ d = new Q3UrlPrivate;
+ QString rel = relUrl;
+ slashify( rel );
+
+ Q3Url urlTmp( url );
+ if ( !urlTmp.isValid() ) {
+ urlTmp.reset();
+ }
+ if ( isRelativeUrl( rel ) ) {
+ if ( rel[ 0 ] == QLatin1Char('#') ) {
+ *this = urlTmp;
+ rel.remove( (uint)0, 1 );
+ decode( rel );
+ setRef( rel );
+ } else if ( rel[ 0 ] == QLatin1Char('?') ) {
+ *this = urlTmp;
+ rel.remove( (uint)0, 1 );
+ setQuery( rel );
+ } else {
+ decode( rel );
+ *this = urlTmp;
+ setRef( QString() );
+ if ( checkSlash && d->cleanPath[(int)path().length()-1] != QLatin1Char('/') ) {
+ if ( isRelativeUrl( path() ) )
+ setEncodedPathAndQuery( rel );
+ else
+ setFileName( rel );
+ } else {
+ QString p = urlTmp.path();
+ if ( p.isEmpty() ) {
+ // allow URLs like "file:foo"
+ if ( !d->host.isEmpty() && !d->user.isEmpty() && !d->pass.isEmpty() )
+ p = QLatin1String("/");
+ }
+ if ( !p.isEmpty() && !p.endsWith(QLatin1Char('/')) )
+ p += QLatin1Char('/');
+ p += rel;
+ d->path = p;
+ d->cleanPathDirty = true;
+ }
+ }
+ } else {
+ if ( rel[ 0 ] == QChar( QLatin1Char('/') ) ) {
+ *this = urlTmp;
+ setEncodedPathAndQuery( rel );
+ } else {
+ *this = rel;
+ }
+ }
+}
+
+/*!
+ Destructor.
+*/
+
+Q3Url::~Q3Url()
+{
+ delete d;
+ d = 0;
+}
+
+/*!
+ Returns the protocol of the URL. Typically, "file", "http", "ftp",
+ etc.
+
+ \sa setProtocol()
+*/
+
+QString Q3Url::protocol() const
+{
+ return d->protocol;
+}
+
+/*!
+ Sets the protocol of the URL to \a protocol. Typically, "file",
+ "http", "ftp", etc.
+
+ \sa protocol()
+*/
+
+void Q3Url::setProtocol( const QString& protocol )
+{
+ d->protocol = protocol;
+ if ( hasHost() )
+ d->isValid = true;
+}
+
+/*!
+ Returns the username of the URL.
+
+ \sa setUser() setPassword()
+*/
+
+QString Q3Url::user() const
+{
+ return d->user;
+}
+
+/*!
+ Sets the username of the URL to \a user.
+
+ \sa user() setPassword()
+*/
+
+void Q3Url::setUser( const QString& user )
+{
+ d->user = user;
+}
+
+/*!
+ Returns true if the URL contains a username; otherwise returns
+ false.
+
+ \sa setUser() setPassword()
+*/
+
+bool Q3Url::hasUser() const
+{
+ return !d->user.isEmpty();
+}
+
+/*!
+ Returns the password of the URL.
+
+ \warning Passwords passed in URLs are normally \e insecure; this
+ is due to the mechanism, not because of Qt.
+
+ \sa setPassword() setUser()
+*/
+
+QString Q3Url::password() const
+{
+ return d->pass;
+}
+
+/*!
+ Sets the password of the URL to \a pass.
+
+ \warning Passwords passed in URLs are normally \e insecure; this
+ is due to the mechanism, not because of Qt.
+
+ \sa password() setUser()
+*/
+
+void Q3Url::setPassword( const QString& pass )
+{
+ d->pass = pass;
+}
+
+/*!
+ Returns true if the URL contains a password; otherwise returns
+ false.
+
+ \warning Passwords passed in URLs are normally \e insecure; this
+ is due to the mechanism, not because of Qt.
+
+ \sa setPassword() setUser()
+*/
+
+bool Q3Url::hasPassword() const
+{
+ return !d->pass.isEmpty();
+}
+
+/*!
+ Returns the hostname of the URL.
+
+ \sa setHost() hasHost()
+*/
+
+QString Q3Url::host() const
+{
+ return d->host;
+}
+
+/*!
+ Sets the hostname of the URL to \a host.
+
+ \sa host() hasHost()
+*/
+
+void Q3Url::setHost( const QString& host )
+{
+ d->host = host;
+ if ( !d->protocol.isNull() && d->protocol != QLatin1String("file") )
+ d->isValid = true;
+}
+
+/*!
+ Returns true if the URL contains a hostname; otherwise returns
+ false.
+
+ \sa setHost()
+*/
+
+bool Q3Url::hasHost() const
+{
+ return !d->host.isEmpty();
+}
+
+/*!
+ Returns the port of the URL or -1 if no port has been set.
+
+ \sa setPort()
+*/
+
+int Q3Url::port() const
+{
+ return d->port;
+}
+
+/*!
+ Sets the port of the URL to \a port.
+
+ \sa port()
+*/
+
+void Q3Url::setPort( int port )
+{
+ d->port = port;
+}
+
+/*!
+ Returns true if the URL contains a port; otherwise returns false.
+
+ \sa setPort()
+*/
+
+bool Q3Url::hasPort() const
+{
+ return d->port >= 0;
+}
+
+/*!
+ Sets the path of the URL to \a path.
+
+ \sa path() hasPath()
+*/
+
+void Q3Url::setPath( const QString& path )
+{
+ d->path = path;
+ slashify( d->path );
+ d->cleanPathDirty = true;
+ d->isValid = true;
+}
+
+/*!
+ Returns true if the URL contains a path; otherwise returns false.
+
+ \sa path() setPath()
+*/
+
+bool Q3Url::hasPath() const
+{
+ return !d->path.isEmpty();
+}
+
+/*!
+ Sets the query of the URL to \a txt. \a txt must be encoded.
+
+ \sa query() encode()
+*/
+
+void Q3Url::setQuery( const QString& txt )
+{
+ d->queryEncoded = txt;
+}
+
+/*!
+ Returns the (encoded) query of the URL.
+
+ \sa setQuery() decode()
+*/
+
+QString Q3Url::query() const
+{
+ return d->queryEncoded;
+}
+
+/*!
+ Returns the (encoded) reference of the URL.
+
+ \sa setRef() hasRef() decode()
+*/
+
+QString Q3Url::ref() const
+{
+ return d->refEncoded;
+}
+
+/*!
+ Sets the reference of the URL to \a txt. \a txt must be encoded.
+
+ \sa ref() hasRef() encode()
+*/
+
+void Q3Url::setRef( const QString& txt )
+{
+ d->refEncoded = txt;
+}
+
+/*!
+ Returns true if the URL has a reference; otherwise returns false.
+
+ \sa setRef()
+*/
+
+bool Q3Url::hasRef() const
+{
+ return !d->refEncoded.isEmpty();
+}
+
+/*!
+ Returns true if the URL is valid; otherwise returns false. A URL
+ is invalid if it cannot be parsed, for example.
+*/
+
+bool Q3Url::isValid() const
+{
+ return d->isValid;
+}
+
+/*!
+ Resets all parts of the URL to their default values and
+ invalidates it.
+*/
+
+void Q3Url::reset()
+{
+ d->protocol = QLatin1String("file");
+ d->user = QLatin1String("");
+ d->pass = QLatin1String("");
+ d->host = QLatin1String("");
+ d->path = QLatin1String("");
+ d->queryEncoded = QLatin1String("");
+ d->refEncoded = QLatin1String("");
+ d->isValid = true;
+ d->port = -1;
+ d->cleanPathDirty = true;
+}
+
+/*!
+ Parses the \a url. Returns true on success; otherwise returns false.
+*/
+
+bool Q3Url::parse( const QString& url )
+{
+ QString url_( url );
+ slashify( url_ );
+
+ if ( url_.isEmpty() ) {
+ d->isValid = false;
+ return false;
+ }
+
+ d->cleanPathDirty = true;
+ d->isValid = true;
+ QString oldProtocol = d->protocol;
+ d->protocol.clear();
+
+ const int Init = 0;
+ const int Protocol = 1;
+ const int Separator1= 2; // :
+ const int Separator2= 3; // :/
+ const int Separator3= 4; // :// or more slashes
+ const int User = 5;
+ const int Pass = 6;
+ const int Host = 7;
+ const int Path = 8;
+ const int Ref = 9;
+ const int Query = 10;
+ const int Port = 11;
+ const int Done = 12;
+
+ const int InputAlpha= 1;
+ const int InputDigit= 2;
+ const int InputSlash= 3;
+ const int InputColon= 4;
+ const int InputAt = 5;
+ const int InputHash = 6;
+ const int InputQuery= 7;
+
+ static uchar table[ 12 ][ 8 ] = {
+ /* None InputAlpha InputDigit InputSlash InputColon InputAt InputHash InputQuery */
+ { 0, Protocol, 0, Path, 0, 0, 0, 0, }, // Init
+ { 0, Protocol, Protocol, 0, Separator1, 0, 0, 0, }, // Protocol
+ { 0, Path, Path, Separator2, 0, 0, 0, 0, }, // Separator1
+ { 0, Path, Path, Separator3, 0, 0, 0, 0, }, // Separator2
+ { 0, User, User, Separator3, Pass, Host, 0, 0, }, // Separator3
+ { 0, User, User, User, Pass, Host, User, User, }, // User
+ { 0, Pass, Pass, Pass, Pass, Host, Pass, Pass, }, // Pass
+ { 0, Host, Host, Path, Port, Host, Ref, Query, }, // Host
+ { 0, Path, Path, Path, Path, Path, Ref, Query, }, // Path
+ { 0, Ref, Ref, Ref, Ref, Ref, Ref, Query, }, // Ref
+ { 0, Query, Query, Query, Query, Query, Query, Query, }, // Query
+ { 0, 0, Port, Path, 0, 0, 0, 0, } // Port
+ };
+
+ bool relPath = false;
+
+ relPath = false;
+ bool forceRel = false;
+
+ // If ':' is at pos 1, we have only one letter
+ // before that separator => that's a drive letter!
+ if ( url_.length() >= 2 && url_[1] == QLatin1Char(':') )
+ relPath = forceRel = true;
+
+ int hasNoHost = -1;
+ int cs = url_.find( QLatin1String(":/") );
+ if ( cs != -1 ) // if a protocol is there, find out if there is a host or directly the path after it
+ hasNoHost = url_.find( QLatin1String("///"), cs );
+ table[ 4 ][ 1 ] = User;
+ table[ 4 ][ 2 ] = User;
+ if ( cs == -1 || forceRel ) { // we have a relative file
+ if ( url.find( QLatin1Char(':') ) == -1 || forceRel ) {
+ table[ 0 ][ 1 ] = Path;
+ // Filenames may also begin with a digit
+ table[ 0 ][ 2 ] = Path;
+ } else {
+ table[ 0 ][ 1 ] = Protocol;
+ }
+ relPath = true;
+ } else { // some checking
+ table[ 0 ][ 1 ] = Protocol;
+
+ // find the part between the protocol and the path as the meaning
+ // of that part is dependent on some chars
+ ++cs;
+ while ( url_[ cs ] == QLatin1Char('/') )
+ ++cs;
+ int slash = url_.find( QLatin1Char('/'), cs );
+ if ( slash == -1 )
+ slash = url_.length() - 1;
+ QString tmp = url_.mid( cs, slash - cs + 1 );
+
+ if ( !tmp.isEmpty() ) { // if this part exists
+
+ // look for the @ in this part
+ int at = tmp.find( QLatin1Char('@') );
+ if ( at != -1 )
+ at += cs;
+ // we have no @, which means host[:port], so directly
+ // after the protocol the host starts, or if the protocol
+ // is file or there were more than 2 slashes, it is the
+ // path
+ if ( at == -1 ) {
+ if ( url_.left( 4 ) == QLatin1String("file") || hasNoHost != -1 )
+ table[ 4 ][ 1 ] = Path;
+ else
+ table[ 4 ][ 1 ] = Host;
+ table[ 4 ][ 2 ] = table[ 4 ][ 1 ];
+ }
+ }
+ }
+
+ int state = Init; // parse state
+ int input; // input token
+
+ QChar c = url_[ 0 ];
+ int i = 0;
+ QString port;
+
+ for ( ;; ) {
+ switch ( c.latin1() ) {
+ case '?':
+ input = InputQuery;
+ break;
+ case '#':
+ input = InputHash;
+ break;
+ case '@':
+ input = InputAt;
+ break;
+ case ':':
+ input = InputColon;
+ break;
+ case '/':
+ input = InputSlash;
+ break;
+ case '1': case '2': case '3': case '4': case '5':
+ case '6': case '7': case '8': case '9': case '0':
+ input = InputDigit;
+ break;
+ default:
+ input = InputAlpha;
+ }
+
+ state = table[ state ][ input ];
+
+ switch ( state ) {
+ case Protocol:
+ d->protocol += c;
+ break;
+ case User:
+ d->user += c;
+ break;
+ case Pass:
+ d->pass += c;
+ break;
+ case Host:
+ d->host += c;
+ break;
+ case Path:
+ d->path += c;
+ break;
+ case Ref:
+ d->refEncoded += c;
+ break;
+ case Query:
+ d->queryEncoded += c;
+ break;
+ case Port:
+ port += c;
+ break;
+ default:
+ break;
+ }
+
+ ++i;
+ if ( i > (int)url_.length() - 1 || state == Done || state == 0 )
+ break;
+ c = url_[ i ];
+
+ }
+
+ if ( !port.isEmpty() ) {
+ port.remove( (uint)0, 1 );
+ d->port = port.toInt();
+ }
+
+ // error
+ if ( i < (int)url_.length() - 1 ) {
+ d->isValid = false;
+ return false;
+ }
+
+
+ if ( d->protocol.isEmpty() )
+ d->protocol = oldProtocol;
+
+ if ( d->path.isEmpty() )
+ d->path = QLatin1String("/");
+
+ // hack for windows
+ if ( d->path.length() == 2 && d->path[ 1 ] == QLatin1Char(':') )
+ d->path += QLatin1Char('/');
+
+ // #### do some corrections, should be done nicer too
+ if ( !d->pass.isEmpty() ) {
+ if ( d->pass[ 0 ] == QLatin1Char(':') )
+ d->pass.remove( (uint)0, 1 );
+ decode( d->pass );
+ }
+ if ( !d->user.isEmpty() ) {
+ decode( d->user );
+ }
+ if ( !d->path.isEmpty() ) {
+ if ( d->path[ 0 ] == QLatin1Char('@') || d->path[ 0 ] == QLatin1Char(':') )
+ d->path.remove( (uint)0, 1 );
+ if ( d->path[ 0 ] != QLatin1Char('/') && !relPath && d->path[ 1 ] != QLatin1Char(':') )
+ d->path.prepend( QLatin1Char('/') );
+ }
+ if ( !d->refEncoded.isEmpty() && d->refEncoded[ 0 ] == QLatin1Char('#') )
+ d->refEncoded.remove( (uint)0, 1 );
+ if ( !d->queryEncoded.isEmpty() && d->queryEncoded[ 0 ] == QLatin1Char('?') )
+ d->queryEncoded.remove( (uint)0, 1 );
+ if ( !d->host.isEmpty() && d->host[ 0 ] == QLatin1Char('@') )
+ d->host.remove( (uint)0, 1 );
+
+#if defined(Q_OS_WIN32)
+ // hack for windows file://machine/path syntax
+ if ( d->protocol == QLatin1String("file") ) {
+ if ( url.startsWith(QLatin1String("file://")) &&
+ d->path.length() > 1 && d->path[ 1 ] != QLatin1Char(':') )
+ d->path.prepend( QLatin1Char('/') );
+ }
+#endif
+
+ decode( d->path );
+ d->cleanPathDirty = true;
+
+#if 0
+ qDebug( "URL: %s", url.latin1() );
+ qDebug( "protocol: %s", d->protocol.latin1() );
+ qDebug( "user: %s", d->user.latin1() );
+ qDebug( "pass: %s", d->pass.latin1() );
+ qDebug( "host: %s", d->host.latin1() );
+ qDebug( "path: %s", path().latin1() );
+ qDebug( "ref: %s", d->refEncoded.latin1() );
+ qDebug( "query: %s", d->queryEncoded.latin1() );
+ qDebug( "port: %d\n\n----------------------------\n\n", d->port );
+#endif
+
+ return true;
+}
+
+/*!
+ \overload
+
+ Parses \a url and assigns the resulting data to this class.
+
+ If you pass a string like "/home/qt" the "file" protocol will be
+ assumed.
+*/
+
+Q3Url& Q3Url::operator=( const QString& url )
+{
+ reset();
+ parse( url );
+
+ return *this;
+}
+
+/*!
+ Assigns the data of \a url to this class.
+*/
+
+Q3Url& Q3Url::operator=( const Q3Url& url )
+{
+ *d = *url.d;
+ return *this;
+}
+
+/*!
+ Compares this URL with \a url and returns true if they are equal;
+ otherwise returns false.
+*/
+
+bool Q3Url::operator==( const Q3Url& url ) const
+{
+ if ( !isValid() || !url.isValid() )
+ return false;
+
+ if ( d->protocol == url.d->protocol &&
+ d->user == url.d->user &&
+ d->pass == url.d->pass &&
+ d->host == url.d->host &&
+ d->path == url.d->path &&
+ d->queryEncoded == url.d->queryEncoded &&
+ d->refEncoded == url.d->refEncoded &&
+ d->isValid == url.d->isValid &&
+ d->port == url.d->port )
+ return true;
+
+ return false;
+}
+
+/*!
+ \overload
+
+ Compares this URL with \a url. \a url is parsed first. Returns
+ true if \a url is equal to this url; otherwise returns false.
+*/
+
+bool Q3Url::operator==( const QString& url ) const
+{
+ Q3Url u( url );
+ return ( *this == u );
+}
+
+/*!
+ Sets the file name of the URL to \a name. If this URL contains a
+ fileName(), the original file name is replaced by \a name.
+
+ See the documentation of fileName() for a more detailed discussion
+ of what is handled as file name and what is handled as a directory
+ path.
+
+ \sa fileName()
+*/
+
+void Q3Url::setFileName( const QString& name )
+{
+ QString fn( name );
+ slashify( fn );
+
+ while ( fn[ 0 ] == QLatin1Char( '/' ) )
+ fn.remove( (uint)0, 1 );
+
+ QString p;
+ if ( path().isEmpty() ) {
+ p = QLatin1String("/");
+ } else {
+ p = path();
+ int slash = p.findRev( QLatin1Char( '/' ) );
+ if ( slash == -1 ) {
+ p = QLatin1String("/");
+ } else if ( p[ (int)p.length() - 1 ] != QLatin1Char( '/' ) ) {
+ p.truncate( slash + 1 );
+ }
+ }
+
+ p += fn;
+ if ( !d->queryEncoded.isEmpty() )
+ p += QLatin1Char('?') + d->queryEncoded;
+ setEncodedPathAndQuery( p );
+}
+
+/*!
+ Returns the encoded path and query.
+
+ \sa decode()
+*/
+
+QString Q3Url::encodedPathAndQuery()
+{
+ QString p = path();
+ if ( p.isEmpty() )
+ p = QLatin1String("/");
+
+ encode( p );
+
+ if ( !d->queryEncoded.isEmpty() ) {
+ p += QLatin1Char('?');
+ p += d->queryEncoded;
+ }
+
+ return p;
+}
+
+/*!
+ Parses \a pathAndQuery for a path and query and sets those values.
+ The whole string must be encoded.
+
+ \sa encode()
+*/
+
+void Q3Url::setEncodedPathAndQuery( const QString& pathAndQuery )
+{
+ d->cleanPathDirty = true;
+ int pos = pathAndQuery.find( QLatin1Char('?') );
+ if ( pos == -1 ) {
+ d->path = pathAndQuery;
+ d->queryEncoded = QLatin1String("");
+ } else {
+ d->path = pathAndQuery.left( pos );
+ d->queryEncoded = pathAndQuery.mid( pos + 1 );
+ }
+
+ decode( d->path );
+ d->cleanPathDirty = true;
+}
+
+/*!
+ Returns the path of the URL. If \a correct is true, the path is
+ cleaned (deals with too many or too few slashes, cleans things
+ like "/../..", etc). Otherwise path() returns exactly the path
+ that was parsed or set.
+
+ \sa setPath() hasPath()
+*/
+QString Q3Url::path( bool correct ) const
+{
+ if ( !correct )
+ return d->path;
+
+ if ( d->cleanPathDirty ) {
+ bool check = true;
+ if ( QDir::isRelativePath( d->path ) ) {
+ d->cleanPath = d->path;
+ } else if ( isLocalFile() ) {
+#if defined(Q_OS_WIN32)
+ // hack for stuff like \\machine\path and //machine/path on windows
+ if ( ( d->path.startsWith(QLatin1Char('/')) || d->path.startsWith(QLatin1Char('\\')) ) &&
+ d->path.length() > 1 ) {
+ d->cleanPath = d->path;
+ bool share = (d->cleanPath[0] == QLatin1Char('\\') && d->cleanPath[1] == QLatin1Char('\\')) ||
+ (d->cleanPath[0] == QLatin1Char('/') && d->cleanPath[1] == QLatin1Char('/'));
+ slashify( d->cleanPath, false );
+ d->cleanPath = QDir::cleanDirPath( d->cleanPath );
+ if ( share ) {
+ check = false;
+ while (d->cleanPath.at(0) != QLatin1Char('/') || d->cleanPath.at(1) != QLatin1Char('/'))
+ d->cleanPath.prepend(QLatin1Char('/'));
+ }
+ }
+#endif
+ if ( check ) {
+ QFileInfo fi( d->path );
+ if ( !fi.exists() )
+ d->cleanPath = d->path;
+ else if ( fi.isDir() ) {
+ QString canPath = QDir( d->path ).canonicalPath();
+ QString dir;
+ if ( qt_resolve_symlinks && !canPath.isNull() )
+ dir = QDir::cleanDirPath( canPath );
+ else
+ dir = QDir::cleanDirPath( QDir( d->path ).absPath() );
+ dir += QLatin1Char('/');
+ if ( dir == QLatin1String("//") )
+ d->cleanPath = QLatin1String("/");
+ else
+ d->cleanPath = dir;
+ } else {
+ QString p =
+ QDir::cleanDirPath( (qt_resolve_symlinks ?
+ fi.dir().canonicalPath() :
+ fi.dir().absPath()) );
+ d->cleanPath = p + QLatin1Char('/') + fi.fileName();
+ }
+ }
+ } else {
+ d->cleanPath = QDir::cleanDirPath( d->path );
+ if ( d->path.length() > 1 && d->path.endsWith(QLatin1Char('/')) )
+ d->cleanPath += QLatin1Char('/');
+ }
+
+ if ( check )
+ slashify( d->cleanPath, false );
+ d->cleanPathDirty = false;
+ }
+
+ return d->cleanPath;
+}
+
+/*!
+ Returns true if the URL is a local file; otherwise returns false.
+*/
+
+bool Q3Url::isLocalFile() const
+{
+ return d->protocol == QLatin1String("file");
+}
+
+/*!
+ Returns the file name of the URL. If the path of the URL doesn't
+ have a slash at the end, the part between the last slash and the
+ end of the path string is considered to be the file name. If the
+ path has a slash at the end, an empty string is returned here.
+
+ \sa setFileName()
+*/
+
+QString Q3Url::fileName() const
+{
+ if ( d->path.isEmpty() || d->path.endsWith( QLatin1Char('/') )
+#ifdef Q_WS_WIN
+ || d->path.endsWith( QLatin1Char('\\') )
+#endif
+ )
+ return QString();
+
+ return QFileInfo( d->path ).fileName();
+}
+
+/*!
+ Adds the path \a pa to the path of the URL.
+
+ \sa setPath() hasPath()
+*/
+
+void Q3Url::addPath( const QString& pa )
+{
+ if ( pa.isEmpty() )
+ return;
+
+ QString p( pa );
+ slashify( p );
+
+ if ( path().isEmpty() ) {
+ if ( p[ 0 ] != QLatin1Char( '/' ) )
+ d->path = QLatin1Char('/') + p;
+ else
+ d->path = p;
+ } else {
+ if ( p[ 0 ] != QLatin1Char( '/' ) && d->path[ (int)d->path.length() - 1 ] != QLatin1Char('/') )
+ d->path += QLatin1Char('/') + p;
+ else
+ d->path += p;
+ }
+ d->cleanPathDirty = true;
+}
+
+/*!
+ Returns the directory path of the URL. This is the part of the
+ path of the URL without the fileName(). See the documentation of
+ fileName() for a discussion of what is handled as file name and
+ what is handled as directory path.
+
+ \sa setPath() hasPath()
+*/
+
+QString Q3Url::dirPath() const
+{
+ if ( path().isEmpty() )
+ return QString();
+
+ QString s = path();
+ int pos = s.findRev( QLatin1Char('/') );
+ if ( pos == -1 ) {
+ return QString::fromLatin1( "." );
+ } else {
+ if ( pos == 0 )
+ return QString::fromLatin1( "/" );
+ return s.left( pos );
+ }
+}
+
+/*!
+ Encodes the \a url in-place into UTF-8. For example
+
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 5
+
+ \sa decode()
+*/
+
+void Q3Url::encode( QString& url )
+{
+ if ( url.isEmpty() )
+ return;
+
+ Q3CString curl = url.utf8();
+ int oldlen = curl.length();
+
+ const Q3CString special( "+<>#@\"&%$:,;?={}|^~[]\'`\\ \n\t\r" );
+ QString newUrl;
+ int newlen = 0;
+
+ for ( int i = 0; i < oldlen ;++i ) {
+ uchar inCh = (uchar)curl[ i ];
+
+ if ( inCh >= 128 || special.contains(inCh) ) {
+ newUrl[ newlen++ ] = QLatin1Char( '%' );
+
+ ushort c = inCh / 16;
+ c += c > 9 ? 'A' - 10 : '0';
+ newUrl[ newlen++ ] = c;
+
+ c = inCh % 16;
+ c += c > 9 ? 'A' - 10 : '0';
+ newUrl[ newlen++ ] = c;
+ } else {
+ newUrl[ newlen++ ] = inCh;
+ }
+ }
+
+ url = newUrl;
+}
+
+static uchar hex_to_int( uchar c )
+{
+ if ( c >= 'A' && c <= 'F' )
+ return c - 'A' + 10;
+ if ( c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ if ( c >= '0' && c <= '9')
+ return c - '0';
+ return 0;
+}
+
+/*!
+ Decodes the \a url in-place into UTF-8. For example
+
+ \snippet doc/src/snippets/code/src_qt3support_network_q3url.cpp 6
+
+ \sa encode()
+*/
+
+void Q3Url::decode( QString& url )
+{
+ if ( url.isEmpty() )
+ return;
+
+ int newlen = 0;
+ Q3CString curl = url.utf8();
+ int oldlen = curl.length();
+
+ Q3CString newUrl(oldlen);
+
+ int i = 0;
+ while ( i < oldlen ) {
+ uchar c = (uchar)curl[ i++ ];
+ if ( c == '%' && i <= oldlen - 2 ) {
+ c = hex_to_int( (uchar)curl[ i ] ) * 16 + hex_to_int( (uchar)curl[ i + 1 ] );
+ i += 2;
+ }
+ newUrl [ newlen++ ] = c;
+ }
+ newUrl.truncate( newlen );
+
+ url = QString::fromUtf8(newUrl.data());
+}
+
+
+/*!
+ Composes a string version of the URL and returns it. If \a
+ encodedPath is true the path in the returned string is encoded. If
+ \a forcePrependProtocol is true and \a encodedPath looks like a
+ local filename, the "file:/" protocol is also prepended.
+
+ \sa encode() decode()
+*/
+
+QString Q3Url::toString( bool encodedPath, bool forcePrependProtocol ) const
+{
+ QString res, p = path();
+ if ( encodedPath )
+ encode( p );
+
+ if ( isLocalFile() ) {
+ if ( forcePrependProtocol )
+ res = d->protocol + QLatin1Char(':') + p;
+ else
+ res = p;
+ } else if ( d->protocol == QLatin1String("mailto") ) {
+ res = d->protocol + QLatin1Char(':') + p;
+ } else {
+ res = d->protocol + QLatin1String("://");
+ if ( !d->user.isEmpty() || !d->pass.isEmpty() ) {
+ QString tmp;
+ if ( !d->user.isEmpty() ) {
+ tmp = d->user;
+ encode( tmp );
+ res += tmp;
+ }
+ if ( !d->pass.isEmpty() ) {
+ tmp = d->pass;
+ encode( tmp );
+ res += QLatin1Char(':') + tmp;
+ }
+ res += QLatin1Char('@');
+ }
+ res += d->host;
+ if ( d->port != -1 )
+ res += QLatin1Char(':') + QString::number( d->port );
+ if ( !p.isEmpty() ) {
+ if ( !d->host.isEmpty() && p[0]!= QLatin1Char( '/' ) )
+ res += QLatin1Char('/');
+ res += p;
+ }
+ }
+
+ if ( !d->refEncoded.isEmpty() )
+ res += QLatin1Char('#') + d->refEncoded;
+ if ( !d->queryEncoded.isEmpty() )
+ res += QLatin1Char('?') + d->queryEncoded;
+
+ return res;
+}
+
+/*!
+ Composes a string version of the URL and returns it.
+
+ \sa Q3Url::toString()
+*/
+
+Q3Url::operator QString() const
+{
+ return toString();
+}
+
+/*!
+ Changes the directory to one directory up. This function always returns
+ true.
+
+ \sa setPath()
+*/
+
+bool Q3Url::cdUp()
+{
+ d->path += QLatin1String("/..");
+ d->cleanPathDirty = true;
+ return true;
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_URL