/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the QtGui module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
#include <QtCore/qglobal.h>
#define QT_FT_BEGIN_HEADER
#define QT_FT_END_HEADER
#include <private/qrasterdefs_p.h>
#include <private/qgrayraster_p.h>
#include <qpainterpath.h>
#include <qdebug.h>
#include <qhash.h>
#include <qlabel.h>
#include <qbitmap.h>
#include <qmath.h>
#if defined (Q_WS_X11)
# include <private/qfontengine_ft_p.h>
#endif
// #include <private/qdatabuffer_p.h>
// #include <private/qpainter_p.h>
#include <private/qmath_p.h>
#include <private/qtextengine_p.h>
#include <private/qfontengine_p.h>
#include <private/qpixmap_raster_p.h>
// #include <private/qpolygonclipper_p.h>
// #include <private/qrasterizer_p.h>
#include <private/qimage_p.h>
#include "qpaintengine_raster_p.h"
// #include "qbezier_p.h"
#include "qoutlinemapper_p.h"
#if defined(Q_WS_WIN)
# include <qt_windows.h>
# include <qvarlengtharray.h>
# include <private/qfontengine_p.h>
# if defined(Q_OS_WINCE)
# include "qguifunctions_wince.h"
# endif
#elif defined(Q_WS_MAC)
# include <private/qt_mac_p.h>
# include <private/qpixmap_mac_p.h>
# include <private/qpaintengine_mac_p.h>
#elif defined(Q_WS_QWS)
# if !defined(QT_NO_FREETYPE)
# include <private/qfontengine_ft_p.h>
# endif
# if !defined(QT_NO_QWS_QPF2)
# include <private/qfontengine_qpf_p.h>
# endif
# include <private/qabstractfontengine_p.h>
#elif defined(Q_OS_SYMBIAN) && defined(QT_NO_FREETYPE)
# include <private/qfontengine_s60_p.h>
#endif
#if defined(Q_WS_WIN64)
# include <malloc.h>
#endif
#include <limits.h>
QT_BEGIN_NAMESPACE
extern bool qt_scaleForTransform(const QTransform &transform, qreal *scale); // qtransform.cpp
#define qreal_to_fixed_26_6(f) (int(f * 64))
#define qt_swap_int(x, y) { int tmp = (x); (x) = (y); (y) = tmp; }
#define qt_swap_qreal(x, y) { qreal tmp = (x); (x) = (y); (y) = tmp; }
// #define QT_DEBUG_DRAW
#ifdef QT_DEBUG_DRAW
void dumpClip(int width, int height, const QClipData *clip);
#endif
#define QT_FAST_SPANS
// A little helper macro to get a better approximation of dimensions.
// If we have a rect that starting at 0.5 of width 3.5 it should span
// 4 pixels.
#define int_dim(pos, dim) (int(pos+dim) - int(pos))
// use the same rounding as in qrasterizer.cpp (6 bit fixed point)
static const qreal aliasedCoordinateDelta = 0.5 - 0.015625;
#ifdef Q_WS_WIN
extern bool qt_cleartype_enabled;
#endif
#ifdef Q_WS_MAC
extern bool qt_applefontsmoothing_enabled;
#endif
/********************************************************************************
* Span functions
*/
static void qt_span_fill_clipRect(int count, const QSpan *spans, void *userData);
static void qt_span_fill_clipped(int count, const QSpan *spans, void *userData);
static void qt_span_clip(int count, const QSpan *spans, void *userData);
static void qt_merge_clip(const QClipData *c1, const QClipData *c2, QClipData *result);
struct ClipData
{
QClipData *oldClip;
QClipData *newClip;
Qt::ClipOperation operation;
};
enum LineDrawMode {
LineDrawClipped,
LineDrawNormal,
LineDrawIncludeLastPixel
};
static void drawLine_midpoint_i(int x1, int y1, int x2, int y2, ProcessSpans span_func, QSpanData *data,
LineDrawMode style, const QIntRect &rect);
static void drawLine_midpoint_dashed_i(int x1, int y1, int x2, int y2,
QPen *pen, ProcessSpans span_func, QSpanData *data,
LineDrawMode style, const QIntRect &devRect,
int *patternOffset);
// static void drawLine_midpoint_f(qreal x1, qreal y1, qreal x2, qreal y2,
// ProcessSpans span_func, QSpanData *data,
// LineDrawMode style, const QRect &devRect);
static void drawEllipse_midpoint_i(const QRect &rect, const QRect &clip,
ProcessSpans pen_func, ProcessSpans brush_func,
QSpanData *pen_data, QSpanData *brush_data);
struct QRasterFloatPoint {
qreal x;
qreal y;
};
#ifdef QT_DEBUG_DRAW
static const QRectF boundingRect(const QPointF *points, int pointCount)
{
const QPointF *e = points;
const QPointF *last = points + pointCount;
qreal minx, maxx, miny, maxy;
minx = maxx = e->x();
miny = maxy = e->y();
while (++e < last) {
if (e->x() < minx)
minx = e->x();
else if (e->x() > maxx)
maxx = e->x();
if (e->y() < miny)
miny = e->y();
else if (e->y() > maxy)
maxy = e->y();
}
return QRectF(QPointF(minx, miny), QPointF(maxx, maxy));
}
#endif
template <typename T> static inline bool isRect(const T *pts, int elementCount) {
return (elementCount == 5 // 5-point polygon, check for closed rect
&& pts[0] == pts[8] && pts[1] == pts[9] // last point == first point
&& pts[0] == pts[6] && pts[2] == pts[4] // x values equal
&& pts[1] == pts[3] && pts[5] == pts[7] // y values equal...
&& pts[0] < pts[4] && pts[1] < pts[5]
) ||
(elementCount == 4 // 4-point polygon, check for unclosed rect
&& pts[0] == pts[6] && pts[2] == pts[4] // x values equal
&& pts[1] == pts[3] && pts[5] == pts[7] // y values equal...
&& pts[0] < pts[4] && pts[1] < pts[5]
);
}
static void qt_ft_outline_move_to(qfixed x, qfixed y, void *data)
{
((QOutlineMapper *) data)->moveTo(QPointF(qt_fixed_to_real(x), qt_fixed_to_real(y)));
}
static void qt_ft_outline_line_to(qfixed x, qfixed y, void *data)
{
((QOutlineMapper *) data)->lineTo(QPointF(qt_fixed_to_real(x), qt_fixed_to_real(y)));
}
static void qt_ft_outline_cubic_to(qfixed c1x, qfixed c1y,
qfixed c2x, qfixed c2y,
qfixed ex, qfixed ey,
void *data)
{
((QOutlineMapper *) data)->curveTo(QPointF(qt_fixed_to_real(c1x), qt_fixed_to_real(c1y)),
QPointF(qt_fixed_to_real(c2x), qt_fixed_to_real(c2y)),
QPointF(qt_fixed_to_real(ex), qt_fixed_to_real(ey)));
}
#if !defined(QT_NO_DEBUG) && 0
static void qt_debug_path(const QPainterPath &path)
{
const char *names[] = {
"MoveTo ",
"LineTo ",
"CurveTo ",
"CurveToData"
};
fprintf(stderr,"\nQPainterPath: elementCount=%d\n", path.elementCount());
for (int i=0; i<path.elementCount(); ++i) {
const QPainterPath::Element &e = path.elementAt(i);
Q_ASSERT(e.type >= 0 && e.type <= QPainterPath::CurveToDataElement);
fprintf(stderr," - %3d:: %s, (%.2f, %.2f)\n", i, names[e.type], e.x, e.y);
}
}
#endif
/*!
\class QRasterPaintEngine
\preliminary
\ingroup qws
\since 4.2
\brief The QRasterPaintEngine class enables hardware acceleration
of painting operations in Qt for Embedded Linux.
Note that this functionality is only available in
\l{Qt for Embedded Linux}.
In \l{Qt for Embedded Linux}, painting is a pure software
implementation. But starting with Qt 4.2, it is
possible to add an accelerated graphics driver to take advantage
of available hardware resources.
Hardware acceleration is accomplished by creating a custom screen
driver, accelerating the copying from memory to the screen, and
implementing a custom paint engine accelerating the various
painting operations. Then a custom paint device (derived from the
QCustomRasterPaintDevice class) and a custom window surface
(derived from QWSWindowSurface) must be implemented to make
\l{Qt for Embedded Linux} aware of the accelerated driver.
\note The QRasterPaintEngine class does not support 8-bit images.
Instead, they need to be converted to a supported format, such as
QImage::Format_ARGB32_Premultiplied.
See the \l {Adding an Accelerated Graphics Driver to Qt for Embedded Linux}
documentation for details.
\sa QCustomRasterPaintDevice, QPaintEngine
*/
/*!
\fn Type QRasterPaintEngine::type() const
\reimp
*/
/*!
\typedef QSpan
\relates QRasterPaintEngine
A struct equivalent to QT_FT_Span, containing a position (x,
y), the span's length in pixels and its color/coverage (a value
ranging from 0 to 255).
*/
/*!
\since 4.5
Creates a raster based paint engine for operating on the given
\a device, with the complete set of \l
{QPaintEngine::PaintEngineFeature}{paint engine features and
capabilities}.
*/
QRasterPaintEngine::QRasterPaintEngine(QPaintDevice *device)
: QPaintEngineEx(*(new QRasterPaintEnginePrivate))
{
d_func()->device = device;
init();
}
/*!
\internal
*/
QRasterPaintEngine::QRasterPaintEngine(QRasterPaintEnginePrivate &dd, QPaintDevice *device)
: QPaintEngineEx(dd)
{
d_func()->device = device;
init();
}
void QRasterPaintEngine::init()
{
Q_D(QRasterPaintEngine);
#ifdef Q_WS_WIN
d->hdc = 0;
#endif
d->rasterPoolSize = 8192;
d->rasterPoolBase =
#if defined(Q_WS_WIN64)
// We make use of setjmp and longjmp in qgrayraster.c which requires
// 16-byte alignment, hence we hardcode this requirement here..
(unsigned char *) _aligned_malloc(d->rasterPoolSize, sizeof(void*) * 2);
#else
(unsigned char *) malloc(d->rasterPoolSize);
#endif
Q_CHECK_PTR(d->rasterPoolBase);
// The antialiasing raster.
d->grayRaster.reset(new QT_FT_Raster);
Q_CHECK_PTR(d->grayRaster.data());
if (qt_ft_grays_raster.raster_new(0, d->grayRaster.data()))
QT_THROW(std::bad_alloc()); // an error creating the raster is caused by a bad malloc
qt_ft_grays_raster.raster_reset(*d->grayRaster.data(), d->rasterPoolBase, d->rasterPoolSize);
d->rasterizer.reset(new QRasterizer);
d->rasterBuffer.reset(new QRasterBuffer());
d->outlineMapper.reset(new QOutlineMapper);
d->outlinemapper_xform_dirty = true;
d->basicStroker.setMoveToHook(qt_ft_outline_move_to);
d->basicStroker.setLineToHook(qt_ft_outline_line_to);
d->basicStroker.setCubicToHook(qt_ft_outline_cubic_to);
d->baseClip.reset(new QClipData(d->device->height()));
d->baseClip->setClipRect(QRect(0, 0, d->device->width(), d->device->height()));
d->image_filler.init(d->rasterBuffer.data(), this);
d->image_filler.type = QSpanData::Texture;
d->image_filler_xform.init(d->rasterBuffer.data(), this);
d->image_filler_xform.type = QSpanData::Texture;
d->solid_color_filler.init(d->rasterBuffer.data(), this);
d->solid_color_filler.type = QSpanData::Solid;
d->deviceDepth = d->device->depth();
d->mono_surface = false;
gccaps &= ~PorterDuff;
QImage::Format format = QImage::Format_Invalid;
switch (d->device->devType()) {
case QInternal::Pixmap:
qWarning("QRasterPaintEngine: unsupported for pixmaps...");
break;
case QInternal::Image:
format = d->rasterBuffer->prepare(static_cast<QImage *>(d->device));
break;
#ifdef Q_WS_QWS
case QInternal::CustomRaster:
d->rasterBuffer->prepare(static_cast<QCustomRasterPaintDevice*>(d->device));
break;
#endif
default:
qWarning("QRasterPaintEngine: unsupported target device %d\n", d->device->devType());
d->device = 0;
return;
}
switch (format) {
case QImage::Format_MonoLSB:
case QImage::Format_Mono:
d->mono_surface = true;
break;
case QImage::Format_ARGB8565_Premultiplied:
case QImage::Format_ARGB8555_Premultiplied:
case QImage::Format_ARGB6666_Premultiplied:
case QImage::Format_ARGB4444_Premultiplied:
case QImage::Format_ARGB32_Premultiplied:
case QImage::Format_ARGB32:
gccaps |= PorterDuff;
break;
case QImage::Format_RGB32:
case QImage::Format_RGB444:
case QImage::Format_RGB555:
case QImage::Format_RGB666:
case QImage::Format_RGB888:
case QImage::Format_RGB16:
break;
default:
break;
}
}
/*!
Destroys this paint engine.
*/
QRasterPaintEngine::~QRasterPaintEngine()
{
Q_D(QRasterPaintEngine);
#if defined(Q_WS_WIN64)
_aligned_free(d->rasterPoolBase);
#else
free(d->rasterPoolBase);
#endif
qt_ft_grays_raster.raster_done(*d->grayRaster.data());
}
/*!
\reimp
*/
bool QRasterPaintEngine::begin(QPaintDevice *device)
{
Q_D(QRasterPaintEngine);
if (device->devType() == QInternal::Pixmap) {
QPixmap *pixmap = static_cast<QPixmap *>(device);
if (pixmap->data->classId() == QPixmapData::RasterClass)
d->device = pixmap->data->buffer();
} else {
d->device = device;
}
// Make sure QPaintEngine::paintDevice() returns the proper device.
d->pdev = d->device;
Q_ASSERT(d->device->devType() == QInternal::Image
|| d->device->devType() == QInternal::CustomRaster);
d->systemStateChanged();
QRasterPaintEngineState *s = state();
ensureOutlineMapper();
d->outlineMapper->m_clip_rect = d->deviceRect.adjusted(-10, -10, 10, 10);
// This is the upp
QRect bounds(-QT_RASTER_COORD_LIMIT, -QT_RASTER_COORD_LIMIT,
QT_RASTER_COORD_LIMIT*2 - 1, QT_RASTER_COORD_LIMIT * 2 - 1);
d->outlineMapper->m_clip_rect = bounds.intersected(d->outlineMapper->m_clip_rect);
d->rasterizer->setClipRect(d->deviceRect);
s->penData.init(d->rasterBuffer.data(), this);
s->penData.setup(s->pen.brush(), s->intOpacity, s->composition_mode);
s->stroker = &d->basicStroker;
d->basicStroker.setClipRect(d->deviceRect);
s->brushData.init(d->rasterBuffer.data(), this);
s->brushData.setup(s->brush, s->intOpacity, s->composition_mode);
d->rasterBuffer->compositionMode = QPainter::CompositionMode_SourceOver;
setDirty(DirtyBrushOrigin);
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::begin(" << (void *) device
<< ") devType:" << device->devType()
<< "devRect:" << d->deviceRect;
if (d->baseClip) {
dumpClip(d->rasterBuffer->width(), d->rasterBuffer->height(), &*d->baseClip);
}
#endif
#if defined(Q_WS_WIN)
d->isPlain45DegreeRotation = true;
#endif
if (d->mono_surface)
d->glyphCacheType = QFontEngineGlyphCache::Raster_Mono;
#if defined(Q_WS_WIN)
else if (qt_cleartype_enabled)
#elif defined (Q_WS_MAC)
else if (qt_applefontsmoothing_enabled)
#else
else if (false)
#endif
{
QImage::Format format = static_cast<QImage *>(d->device)->format();
if (format == QImage::Format_ARGB32_Premultiplied || format == QImage::Format_RGB32)
d->glyphCacheType = QFontEngineGlyphCache::Raster_RGBMask;
else
d->glyphCacheType = QFontEngineGlyphCache::Raster_A8;
} else
d->glyphCacheType = QFontEngineGlyphCache::Raster_A8;
setActive(true);
return true;
}
/*!
\reimp
*/
bool QRasterPaintEngine::end()
{
#ifdef QT_DEBUG_DRAW
Q_D(QRasterPaintEngine);
qDebug() << "QRasterPaintEngine::end devRect:" << d->deviceRect;
if (d->baseClip) {
dumpClip(d->rasterBuffer->width(), d->rasterBuffer->height(), &*d->baseClip);
}
#endif
return true;
}
/*!
\internal
*/
void QRasterPaintEngine::releaseBuffer()
{
Q_D(QRasterPaintEngine);
d->rasterBuffer.reset(new QRasterBuffer);
}
/*!
\internal
*/
QSize QRasterPaintEngine::size() const
{
Q_D(const QRasterPaintEngine);
return QSize(d->rasterBuffer->width(), d->rasterBuffer->height());
}
/*!
\internal
*/
#ifndef QT_NO_DEBUG
void QRasterPaintEngine::saveBuffer(const QString &s) const
{
Q_D(const QRasterPaintEngine);
d->rasterBuffer->bufferImage().save(s, "PNG");
}
#endif
/*!
\internal
*/
void QRasterPaintEngine::updateMatrix(const QTransform &matrix)
{
QRasterPaintEngineState *s = state();
// FALCON: get rid of this line, see drawImage call below.
s->matrix = matrix;
QTransform::TransformationType txop = s->matrix.type();
switch (txop) {
case QTransform::TxNone:
s->flags.int_xform = true;
break;
case QTransform::TxTranslate:
s->flags.int_xform = qreal(int(s->matrix.dx())) == s->matrix.dx()
&& qreal(int(s->matrix.dy())) == s->matrix.dy();
break;
case QTransform::TxScale:
s->flags.int_xform = qreal(int(s->matrix.dx())) == s->matrix.dx()
&& qreal(int(s->matrix.dy())) == s->matrix.dy()
&& qreal(int(s->matrix.m11())) == s->matrix.m11()
&& qreal(int(s->matrix.m22())) == s->matrix.m22();
break;
default: // shear / perspective...
s->flags.int_xform = false;
break;
}
s->flags.tx_noshear = qt_scaleForTransform(s->matrix, &s->txscale);
ensureOutlineMapper();
#ifdef Q_WS_WIN
Q_D(QRasterPaintEngine);
d->isPlain45DegreeRotation = false;
if (txop >= QTransform::TxRotate) {
d->isPlain45DegreeRotation =
(qFuzzyIsNull(matrix.m11())
&& qFuzzyIsNull(matrix.m12() - qreal(1))
&& qFuzzyIsNull(matrix.m21() + qreal(1))
&& qFuzzyIsNull(matrix.m22())
)
||
(qFuzzyIsNull(matrix.m11() + qreal(1))
&& qFuzzyIsNull(matrix.m12())
&& qFuzzyIsNull(matrix.m21())
&& qFuzzyIsNull(matrix.m22() + qreal(1))
)
||
(qFuzzyIsNull(matrix.m11())
&& qFuzzyIsNull(matrix.m12() + qreal(1))
&& qFuzzyIsNull(matrix.m21() - qreal(1))
&& qFuzzyIsNull(matrix.m22())
)
;
}
#endif
}
QRasterPaintEngineState::~QRasterPaintEngineState()
{
if (flags.has_clip_ownership)
delete clip;
}
QRasterPaintEngineState::QRasterPaintEngineState()
{
stroker = 0;
fillFlags = 0;
strokeFlags = 0;
pixmapFlags = 0;
intOpacity = 256;
txscale = 1.;
flags.fast_pen = true;
flags.antialiased = false;
flags.bilinear = false;
flags.fast_text = true;
flags.int_xform = true;
flags.tx_noshear = true;
flags.fast_images = true;
clip = 0;
flags.has_clip_ownership = false;
dirty = 0;
}
QRasterPaintEngineState::QRasterPaintEngineState(QRasterPaintEngineState &s)
: QPainterState(s)
{
stroker = s.stroker;
lastBrush = s.lastBrush;
brushData = s.brushData;
brushData.tempImage = 0;
lastPen = s.lastPen;
penData = s.penData;
penData.tempImage = 0;
fillFlags = s.fillFlags;
strokeFlags = s.strokeFlags;
pixmapFlags = s.pixmapFlags;
intOpacity = s.intOpacity;
txscale = s.txscale;
flag_bits = s.flag_bits;
clip = s.clip;
flags.has_clip_ownership = false;
dirty = s.dirty;
}
/*!
\internal
*/
QPainterState *QRasterPaintEngine::createState(QPainterState *orig) const
{
QRasterPaintEngineState *s;
if (!orig)
s = new QRasterPaintEngineState();
else
s = new QRasterPaintEngineState(*static_cast<QRasterPaintEngineState *>(orig));
return s;
}
/*!
\internal
*/
void QRasterPaintEngine::setState(QPainterState *s)
{
Q_D(QRasterPaintEngine);
QPaintEngineEx::setState(s);
d->rasterBuffer->compositionMode = s->composition_mode;
}
/*!
\fn QRasterPaintEngineState *QRasterPaintEngine::state()
\internal
*/
/*!
\fn const QRasterPaintEngineState *QRasterPaintEngine::state() const
\internal
*/
/*!
\internal
*/
void QRasterPaintEngine::penChanged()
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::penChanged():" << state()->pen;
#endif
QRasterPaintEngineState *s = state();
s->strokeFlags |= DirtyPen;
s->dirty |= DirtyPen;
}
/*!
\internal
*/
void QRasterPaintEngine::updatePen(const QPen &pen)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::updatePen():" << s->pen;
#endif
Qt::PenStyle pen_style = qpen_style(pen);
s->lastPen = pen;
s->strokeFlags = 0;
s->penData.clip = d->clip();
s->penData.setup(pen_style == Qt::NoPen ? QBrush() : pen.brush(), s->intOpacity, s->composition_mode);
if (s->strokeFlags & QRasterPaintEngine::DirtyTransform
|| pen.brush().transform().type() >= QTransform::TxNone) {
d->updateMatrixData(&s->penData, pen.brush(), s->matrix);
}
// Slightly ugly handling of an uncommon case... We need to change
// the pen because it is reused in draw_midpoint to decide dashed
// or non-dashed.
if (pen_style == Qt::CustomDashLine && pen.dashPattern().size() == 0) {
pen_style = Qt::SolidLine;
s->lastPen.setStyle(Qt::SolidLine);
}
d->basicStroker.setJoinStyle(qpen_joinStyle(pen));
d->basicStroker.setCapStyle(qpen_capStyle(pen));
d->basicStroker.setMiterLimit(pen.miterLimit());
qreal penWidth = qpen_widthf(pen);
if (penWidth == 0)
d->basicStroker.setStrokeWidth(1);
else
d->basicStroker.setStrokeWidth(penWidth);
if(pen_style == Qt::SolidLine) {
s->stroker = &d->basicStroker;
} else if (pen_style != Qt::NoPen) {
if (!d->dashStroker)
d->dashStroker.reset(new QDashStroker(&d->basicStroker));
if (pen.isCosmetic()) {
d->dashStroker->setClipRect(d->deviceRect);
} else {
// ### I've seen this inverted devrect multiple places now...
QRectF clipRect = s->matrix.inverted().mapRect(QRectF(d->deviceRect));
d->dashStroker->setClipRect(clipRect);
}
d->dashStroker->setDashPattern(pen.dashPattern());
d->dashStroker->setDashOffset(pen.dashOffset());
s->stroker = d->dashStroker.data();
} else {
s->stroker = 0;
}
s->flags.fast_pen = pen_style > Qt::NoPen
&& s->penData.blend
&& !s->flags.antialiased
&& (penWidth == 0 || (penWidth <= 1
&& (s->matrix.type() <= QTransform::TxTranslate
|| pen.isCosmetic())));
ensureState(); // needed because of tx_noshear...
s->flags.non_complex_pen = qpen_capStyle(s->lastPen) <= Qt::SquareCap && s->flags.tx_noshear;
s->strokeFlags = 0;
}
/*!
\internal
*/
void QRasterPaintEngine::brushOriginChanged()
{
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::brushOriginChanged()" << s->brushOrigin;
#endif
s->fillFlags |= DirtyBrushOrigin;
}
/*!
\internal
*/
void QRasterPaintEngine::brushChanged()
{
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::brushChanged():" << s->brush;
#endif
s->fillFlags |= DirtyBrush;
}
/*!
\internal
*/
void QRasterPaintEngine::updateBrush(const QBrush &brush)
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::updateBrush()" << brush;
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
// must set clip prior to setup, as setup uses it...
s->brushData.clip = d->clip();
s->brushData.setup(brush, s->intOpacity, s->composition_mode);
if (s->fillFlags & DirtyTransform
|| brush.transform().type() >= QTransform::TxNone)
d_func()->updateMatrixData(&s->brushData, brush, d->brushMatrix());
s->lastBrush = brush;
s->fillFlags = 0;
}
void QRasterPaintEngine::updateOutlineMapper()
{
Q_D(QRasterPaintEngine);
d->outlineMapper->setMatrix(state()->matrix);
}
void QRasterPaintEngine::updateState()
{
QRasterPaintEngineState *s = state();
if (s->dirty & DirtyTransform)
updateMatrix(s->matrix);
if (s->dirty & (DirtyPen|DirtyCompositionMode)) {
const QPainter::CompositionMode mode = s->composition_mode;
s->flags.fast_text = (s->penData.type == QSpanData::Solid)
&& (mode == QPainter::CompositionMode_Source
|| (mode == QPainter::CompositionMode_SourceOver
&& qAlpha(s->penData.solid.color) == 255));
}
s->dirty = 0;
}
/*!
\internal
*/
void QRasterPaintEngine::opacityChanged()
{
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::opacityChanged()" << s->opacity;
#endif
s->fillFlags |= DirtyOpacity;
s->strokeFlags |= DirtyOpacity;
s->pixmapFlags |= DirtyOpacity;
s->intOpacity = (int) (s->opacity * 256);
}
/*!
\internal
*/
void QRasterPaintEngine::compositionModeChanged()
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::compositionModeChanged()" << s->composition_mode;
#endif
s->fillFlags |= DirtyCompositionMode;
s->dirty |= DirtyCompositionMode;
s->strokeFlags |= DirtyCompositionMode;
d->rasterBuffer->compositionMode = s->composition_mode;
d->recalculateFastImages();
}
/*!
\internal
*/
void QRasterPaintEngine::renderHintsChanged()
{
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::renderHintsChanged()" << hex << s->renderHints;
#endif
bool was_aa = s->flags.antialiased;
bool was_bilinear = s->flags.bilinear;
s->flags.antialiased = bool(s->renderHints & QPainter::Antialiasing);
s->flags.bilinear = bool(s->renderHints & QPainter::SmoothPixmapTransform);
if (was_aa != s->flags.antialiased)
s->strokeFlags |= DirtyHints;
if (was_bilinear != s->flags.bilinear) {
s->strokeFlags |= DirtyPen;
s->fillFlags |= DirtyBrush;
}
Q_D(QRasterPaintEngine);
d->recalculateFastImages();
}
/*!
\internal
*/
void QRasterPaintEngine::transformChanged()
{
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::transformChanged()" << s->matrix;
#endif
s->fillFlags |= DirtyTransform;
s->strokeFlags |= DirtyTransform;
s->dirty |= DirtyTransform;
Q_D(QRasterPaintEngine);
d->recalculateFastImages();
}
/*!
\internal
*/
void QRasterPaintEngine::clipEnabledChanged()
{
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::clipEnabledChanged()" << s->clipEnabled;
#endif
if (s->clip) {
s->clip->enabled = s->clipEnabled;
s->fillFlags |= DirtyClipEnabled;
s->strokeFlags |= DirtyClipEnabled;
s->pixmapFlags |= DirtyClipEnabled;
}
}
#ifdef Q_WS_QWS
void QRasterPaintEnginePrivate::prepare(QCustomRasterPaintDevice *device)
{
rasterBuffer->prepare(device);
}
#endif
void QRasterPaintEnginePrivate::drawImage(const QPointF &pt,
const QImage &img,
SrcOverBlendFunc func,
const QRect &clip,
int alpha,
const QRect &sr)
{
if (alpha == 0 || !clip.isValid())
return;
Q_ASSERT(img.depth() >= 8);
int srcBPL = img.bytesPerLine();
const uchar *srcBits = img.bits();
int srcSize = img.depth() >> 3; // This is the part that is incompatible with lower than 8-bit..
int iw = img.width();
int ih = img.height();
if (!sr.isEmpty()) {
iw = sr.width();
ih = sr.height();
// Adjust the image according to the source offset...
srcBits += ((sr.y() * srcBPL) + sr.x() * srcSize);
}
// adapt the x parameters
int x = qRound(pt.x());
int cx1 = clip.x();
int cx2 = clip.x() + clip.width();
if (x < cx1) {
int d = cx1 - x;
srcBits += srcSize * d;
iw -= d;
x = cx1;
}
if (x + iw > cx2) {
int d = x + iw - cx2;
iw -= d;
}
if (iw <= 0)
return;
// adapt the y paremeters...
int cy1 = clip.y();
int cy2 = clip.y() + clip.height();
int y = qRound(pt.y());
if (y < cy1) {
int d = cy1 - y;
srcBits += srcBPL * d;
ih -= d;
y = cy1;
}
if (y + ih > cy2) {
int d = y + ih - cy2;
ih -= d;
}
if (ih <= 0)
return;
// call the blend function...
int dstSize = rasterBuffer->bytesPerPixel();
int dstBPL = rasterBuffer->bytesPerLine();
func(rasterBuffer->buffer() + x * dstSize + y * dstBPL, dstBPL,
srcBits, srcBPL,
iw, ih,
alpha);
}
void QRasterPaintEnginePrivate::systemStateChanged()
{
QRect clipRect(0, 0,
qMin(QT_RASTER_COORD_LIMIT, device->width()),
qMin(QT_RASTER_COORD_LIMIT, device->height()));
if (!systemClip.isEmpty()) {
QRegion clippedDeviceRgn = systemClip & clipRect;
deviceRect = clippedDeviceRgn.boundingRect();
baseClip->setClipRegion(clippedDeviceRgn);
} else {
deviceRect = clipRect;
baseClip->setClipRect(deviceRect);
}
#ifdef QT_DEBUG_DRAW
qDebug() << "systemStateChanged" << this << "deviceRect" << deviceRect << clipRect << systemClip;
#endif
exDeviceRect = deviceRect;
Q_Q(QRasterPaintEngine);
q->state()->strokeFlags |= QPaintEngine::DirtyClipRegion;
q->state()->fillFlags |= QPaintEngine::DirtyClipRegion;
q->state()->pixmapFlags |= QPaintEngine::DirtyClipRegion;
}
void QRasterPaintEnginePrivate::updateMatrixData(QSpanData *spanData, const QBrush &b, const QTransform &m)
{
if (b.d->style == Qt::NoBrush || b.d->style == Qt::SolidPattern)
return;
Q_Q(QRasterPaintEngine);
bool bilinear = q->state()->flags.bilinear;
if (b.d->transform.type() > QTransform::TxNone) { // FALCON: optimise
spanData->setupMatrix(b.transform() * m, bilinear);
} else {
if (m.type() <= QTransform::TxTranslate) {
// specialize setupMatrix for translation matrices
// to avoid needless matrix inversion
spanData->m11 = 1;
spanData->m12 = 0;
spanData->m13 = 0;
spanData->m21 = 0;
spanData->m22 = 1;
spanData->m23 = 0;
spanData->m33 = 1;
spanData->dx = -m.dx();
spanData->dy = -m.dy();
spanData->txop = m.type();
spanData->bilinear = bilinear;
spanData->fast_matrix = qAbs(m.dx()) < 1e4 && qAbs(m.dy()) < 1e4;
spanData->adjustSpanMethods();
} else {
spanData->setupMatrix(m, bilinear);
}
}
}
// #define QT_CLIPPING_RATIOS
#ifdef QT_CLIPPING_RATIOS
int rectClips;
int regionClips;
int totalClips;
static void checkClipRatios(QRasterPaintEnginePrivate *d)
{
if (d->clip()->hasRectClip)
rectClips++;
if (d->clip()->hasRegionClip)
regionClips++;
totalClips++;
if ((totalClips % 5000) == 0) {
printf("Clipping ratio: rectangular=%f%%, region=%f%%, complex=%f%%\n",
rectClips * 100.0 / (qreal) totalClips,
regionClips * 100.0 / (qreal) totalClips,
(totalClips - rectClips - regionClips) * 100.0 / (qreal) totalClips);
totalClips = 0;
rectClips = 0;
regionClips = 0;
}
}
#endif
static void qrasterpaintengine_state_setNoClip(QRasterPaintEngineState *s)
{
if (s->flags.has_clip_ownership)
delete s->clip;
s->clip = 0;
s->flags.has_clip_ownership = false;
}
static void qrasterpaintengine_dirty_clip(QRasterPaintEnginePrivate *d, QRasterPaintEngineState *s)
{
s->fillFlags |= QPaintEngine::DirtyClipPath;
s->strokeFlags |= QPaintEngine::DirtyClipPath;
s->pixmapFlags |= QPaintEngine::DirtyClipPath;
d->solid_color_filler.clip = d->clip();
d->solid_color_filler.adjustSpanMethods();
#ifdef QT_DEBUG_DRAW
dumpClip(d->rasterBuffer->width(), d->rasterBuffer->height(), &*d->clip());
#endif
}
/*!
\internal
*/
void QRasterPaintEngine::clip(const QVectorPath &path, Qt::ClipOperation op)
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::clip(): " << path << op;
if (path.elements()) {
for (int i=0; i<path.elementCount(); ++i) {
qDebug() << " - " << path.elements()[i]
<< '(' << path.points()[i*2] << ", " << path.points()[i*2+1] << ')';
}
} else {
for (int i=0; i<path.elementCount(); ++i) {
qDebug() << " ---- "
<< '(' << path.points()[i*2] << ", " << path.points()[i*2+1] << ')';
}
}
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
const qreal *points = path.points();
const QPainterPath::ElementType *types = path.elements();
// There are some cases that are not supported by clip(QRect)
if (op != Qt::UniteClip && (op != Qt::IntersectClip || !s->clip
|| s->clip->hasRectClip || s->clip->hasRegionClip)) {
if (s->matrix.type() <= QTransform::TxTranslate
&& ((path.shape() == QVectorPath::RectangleHint)
|| (isRect(points, path.elementCount())
&& (!types || (types[0] == QPainterPath::MoveToElement
&& types[1] == QPainterPath::LineToElement
&& types[2] == QPainterPath::LineToElement
&& types[3] == QPainterPath::LineToElement))))) {
#ifdef QT_DEBUG_DRAW
qDebug() << " --- optimizing vector clip to rect clip...";
#endif
QRectF r(points[0], points[1], points[4]-points[0], points[5]-points[1]);
clip(r.toRect(), op);
return;
}
}
if (op == Qt::NoClip) {
qrasterpaintengine_state_setNoClip(s);
} else {
QClipData *base = d->baseClip.data();
// Intersect with current clip when available...
if (op == Qt::IntersectClip && s->clip)
base = s->clip;
// We always intersect, except when there is nothing to
// intersect with, in which case we simplify the operation to
// a replace...
Qt::ClipOperation isectOp = Qt::IntersectClip;
if (base == 0)
isectOp = Qt::ReplaceClip;
QClipData *newClip = new QClipData(d->rasterBuffer->height());
newClip->initialize();
ClipData clipData = { base, newClip, isectOp };
ensureOutlineMapper();
d->rasterize(d->outlineMapper->convertPath(path), qt_span_clip, &clipData, 0);
newClip->fixup();
if (op == Qt::UniteClip) {
// merge clips
QClipData *result = new QClipData(d->rasterBuffer->height());
QClipData *current = s->clip ? s->clip : new QClipData(d->rasterBuffer->height());
qt_merge_clip(current, newClip, result);
result->fixup();
delete newClip;
if (!s->clip)
delete current;
newClip = result;
}
if (s->flags.has_clip_ownership)
delete s->clip;
s->clip = newClip;
s->flags.has_clip_ownership = true;
}
qrasterpaintengine_dirty_clip(d, s);
}
/*!
\internal
*/
void QRasterPaintEngine::clip(const QRect &rect, Qt::ClipOperation op)
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::clip(): " << rect << op;
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (op == Qt::NoClip) {
qrasterpaintengine_state_setNoClip(s);
} else if (op == Qt::UniteClip || s->matrix.type() > QTransform::TxScale) {
QPaintEngineEx::clip(rect, op);
return;
} else if (op == Qt::ReplaceClip || s->clip == 0) {
// No current clip, hence we intersect with sysclip and be
// done with it...
QRect clipRect = s->matrix.mapRect(rect) & d->deviceRect;
QRegion clipRegion = systemClip();
QClipData *clip = new QClipData(d->rasterBuffer->height());
if (clipRegion.isEmpty())
clip->setClipRect(clipRect);
else
clip->setClipRegion(clipRegion & clipRect);
if (s->flags.has_clip_ownership)
delete s->clip;
s->clip = clip;
s->clip->enabled = true;
s->flags.has_clip_ownership = true;
} else { // intersect clip with current clip
QClipData *base = s->clip;
Q_ASSERT(base);
if (base->hasRectClip || base->hasRegionClip) {
QRect clipRect = s->matrix.mapRect(rect) & d->deviceRect;
if (!s->flags.has_clip_ownership) {
s->clip = new QClipData(d->rasterBuffer->height());
s->flags.has_clip_ownership = true;
}
if (base->hasRectClip)
s->clip->setClipRect(base->clipRect & clipRect);
else
s->clip->setClipRegion(base->clipRegion & clipRect);
s->clip->enabled = true;
} else {
QPaintEngineEx::clip(rect, op);
return;
}
}
qrasterpaintengine_dirty_clip(d, s);
}
/*!
\internal
*/
void QRasterPaintEngine::clip(const QRegion ®ion, Qt::ClipOperation op)
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::clip(): " << region << op;
#endif
Q_D(QRasterPaintEngine);
if (region.rectCount() == 1) {
clip(region.boundingRect(), op);
return;
}
QRasterPaintEngineState *s = state();
const QClipData *clip = d->clip();
const QClipData *baseClip = d->baseClip.data();
if (op == Qt::NoClip) {
qrasterpaintengine_state_setNoClip(s);
} else if (s->matrix.type() > QTransform::TxScale
|| op == Qt::UniteClip
|| (op == Qt::IntersectClip && !clip->hasRectClip && !clip->hasRegionClip)
|| (op == Qt::ReplaceClip && !baseClip->hasRectClip && !baseClip->hasRegionClip)) {
QPaintEngineEx::clip(region, op);
} else {
const QClipData *curClip;
QClipData *newClip;
if (op == Qt::IntersectClip)
curClip = clip;
else
curClip = baseClip;
if (s->flags.has_clip_ownership) {
newClip = s->clip;
Q_ASSERT(newClip);
} else {
newClip = new QClipData(d->rasterBuffer->height());
s->clip = newClip;
s->flags.has_clip_ownership = true;
}
QRegion r = s->matrix.map(region);
if (curClip->hasRectClip)
newClip->setClipRegion(r & curClip->clipRect);
else if (curClip->hasRegionClip)
newClip->setClipRegion(r & curClip->clipRegion);
qrasterpaintengine_dirty_clip(d, s);
}
}
/*!
\internal
*/
void QRasterPaintEngine::fillPath(const QPainterPath &path, QSpanData *fillData)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " --- fillPath, bounds=" << path.boundingRect();
#endif
if (!fillData->blend)
return;
Q_D(QRasterPaintEngine);
const QRectF controlPointRect = path.controlPointRect();
QRasterPaintEngineState *s = state();
const QRect deviceRect = s->matrix.mapRect(controlPointRect).toRect();
ProcessSpans blend = d->getBrushFunc(deviceRect, fillData);
const bool do_clip = (deviceRect.left() < -QT_RASTER_COORD_LIMIT
|| deviceRect.right() > QT_RASTER_COORD_LIMIT
|| deviceRect.top() < -QT_RASTER_COORD_LIMIT
|| deviceRect.bottom() > QT_RASTER_COORD_LIMIT);
if (!s->flags.antialiased && !do_clip) {
d->initializeRasterizer(fillData);
d->rasterizer->rasterize(path * s->matrix, path.fillRule());
return;
}
ensureOutlineMapper();
d->rasterize(d->outlineMapper->convertPath(path), blend, fillData, d->rasterBuffer.data());
}
static void fillRect_normalized(const QRect &r, QSpanData *data,
QRasterPaintEnginePrivate *pe)
{
int x1, x2, y1, y2;
bool rectClipped = true;
if (data->clip) {
x1 = qMax(r.x(), data->clip->xmin);
x2 = qMin(r.x() + r.width(), data->clip->xmax);
y1 = qMax(r.y(), data->clip->ymin);
y2 = qMin(r.y() + r.height(), data->clip->ymax);
rectClipped = data->clip->hasRectClip;
} else if (pe) {
x1 = qMax(r.x(), pe->deviceRect.x());
x2 = qMin(r.x() + r.width(), pe->deviceRect.x() + pe->deviceRect.width());
y1 = qMax(r.y(), pe->deviceRect.y());
y2 = qMin(r.y() + r.height(), pe->deviceRect.y() + pe->deviceRect.height());
} else {
x1 = qMax(r.x(), 0);
x2 = qMin(r.x() + r.width(), data->rasterBuffer->width());
y1 = qMax(r.y(), 0);
y2 = qMin(r.y() + r.height(), data->rasterBuffer->height());
}
if (x2 <= x1 || y2 <= y1)
return;
const int width = x2 - x1;
const int height = y2 - y1;
bool isUnclipped = rectClipped
|| (pe && pe->isUnclipped_normalized(QRect(x1, y1, width, height)));
if (pe && isUnclipped) {
const QPainter::CompositionMode mode = pe->rasterBuffer->compositionMode;
if (data->fillRect && (mode == QPainter::CompositionMode_Source
|| (mode == QPainter::CompositionMode_SourceOver
&& qAlpha(data->solid.color) == 255)))
{
data->fillRect(data->rasterBuffer, x1, y1, width, height,
data->solid.color);
return;
}
}
ProcessSpans blend = isUnclipped ? data->unclipped_blend : data->blend;
const int nspans = 256;
QT_FT_Span spans[nspans];
Q_ASSERT(data->blend);
int y = y1;
while (y < y2) {
int n = qMin(nspans, y2 - y);
int i = 0;
while (i < n) {
spans[i].x = x1;
spans[i].len = width;
spans[i].y = y + i;
spans[i].coverage = 255;
++i;
}
blend(n, spans, data);
y += n;
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawRects(const QRect *rects, int rectCount)
{
#ifdef QT_DEBUG_DRAW
qDebug(" - QRasterPaintEngine::drawRect(), rectCount=%d", rectCount);
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
// Fill
ensureBrush();
if (s->brushData.blend) {
if (!s->flags.antialiased && s->matrix.type() <= QTransform::TxTranslate) {
const QRect *r = rects;
const QRect *lastRect = rects + rectCount;
int offset_x = int(s->matrix.dx());
int offset_y = int(s->matrix.dy());
while (r < lastRect) {
QRect rect = r->normalized();
QRect rr = rect.translated(offset_x, offset_y);
fillRect_normalized(rr, &s->brushData, d);
++r;
}
} else {
QRectVectorPath path;
for (int i=0; i<rectCount; ++i) {
path.set(rects[i]);
fill(path, s->brush);
}
}
}
ensurePen();
if (s->penData.blend) {
if (s->flags.fast_pen && s->lastPen.brush().isOpaque()) {
const QRect *r = rects;
const QRect *lastRect = rects + rectCount;
while (r < lastRect) {
int left = r->x();
int right = r->x() + r->width();
int top = r->y();
int bottom = r->y() + r->height();
#ifdef Q_WS_MAC
int pts[] = { top, left,
top, right,
bottom, right,
bottom, left };
#else
int pts[] = { left, top,
right, top,
right, bottom,
left, bottom };
#endif
strokePolygonCosmetic((QPoint *) pts, 4, WindingMode);
++r;
}
} else {
QRectVectorPath path;
for (int i = 0; i < rectCount; ++i) {
path.set(rects[i]);
stroke(path, s->pen);
}
}
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawRects(const QRectF *rects, int rectCount)
{
#ifdef QT_DEBUG_DRAW
qDebug(" - QRasterPaintEngine::drawRect(), rectCount=%d", rectCount);
#endif
#ifdef QT_FAST_SPANS
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensureState();
if (s->flags.tx_noshear) {
ensureBrush();
if (s->brushData.blend) {
d->initializeRasterizer(&s->brushData);
for (int i = 0; i < rectCount; ++i) {
const QRectF &rect = rects[i].normalized();
if (rect.isEmpty())
continue;
const QPointF a = s->matrix.map((rect.topLeft() + rect.bottomLeft()) * 0.5f);
const QPointF b = s->matrix.map((rect.topRight() + rect.bottomRight()) * 0.5f);
d->rasterizer->rasterizeLine(a, b, rect.height() / rect.width());
}
}
ensurePen();
if (s->penData.blend) {
qreal width = s->pen.isCosmetic()
? (s->lastPen.widthF() == 0 ? 1 : s->lastPen.widthF())
: s->lastPen.widthF() * s->txscale;
if (s->flags.fast_pen && s->lastPen.brush().isOpaque()) {
for (int i = 0; i < rectCount; ++i) {
const QRectF &r = rects[i];
qreal left = r.x();
qreal right = r.x() + r.width();
qreal top = r.y();
qreal bottom = r.y() + r.height();
qreal pts[] = { left, top,
right, top,
right, bottom,
left, bottom };
strokePolygonCosmetic((QPointF *) pts, 4, WindingMode);
}
} else if (width <= 1 && qpen_style(s->lastPen) == Qt::SolidLine) {
d->initializeRasterizer(&s->penData);
for (int i = 0; i < rectCount; ++i) {
const QRectF &rect = rects[i].normalized();
if (rect.isEmpty()) {
qreal pts[] = { rect.left(), rect.top(), rect.right(), rect.bottom() };
QVectorPath vp(pts, 2, 0, QVectorPath::LinesHint);
QPaintEngineEx::stroke(vp, s->lastPen);
} else {
const QPointF tl = s->matrix.map(rect.topLeft());
const QPointF tr = s->matrix.map(rect.topRight());
const QPointF bl = s->matrix.map(rect.bottomLeft());
const QPointF br = s->matrix.map(rect.bottomRight());
const qreal w = width / (rect.width() * s->txscale);
const qreal h = width / (rect.height() * s->txscale);
d->rasterizer->rasterizeLine(tl, tr, w); // top
d->rasterizer->rasterizeLine(bl, br, w); // bottom
d->rasterizer->rasterizeLine(bl, tl, h); // left
d->rasterizer->rasterizeLine(br, tr, h); // right
}
}
} else {
for (int i = 0; i < rectCount; ++i) {
const QRectF &r = rects[i];
qreal left = r.x();
qreal right = r.x() + r.width();
qreal top = r.y();
qreal bottom = r.y() + r.height();
qreal pts[] = { left, top,
right, top,
right, bottom,
left, bottom,
left, top };
QVectorPath vp(pts, 5, 0, QVectorPath::RectangleHint);
QPaintEngineEx::stroke(vp, s->lastPen);
}
}
}
return;
}
#endif // QT_FAST_SPANS
QPaintEngineEx::drawRects(rects, rectCount);
}
/*!
\internal
*/
void QRasterPaintEngine::stroke(const QVectorPath &path, const QPen &pen)
{
QRasterPaintEngineState *s = state();
ensurePen(pen);
if (!s->penData.blend)
return;
if (s->flags.fast_pen && !path.isCurved()
&& s->lastPen.brush().isOpaque()) {
int count = path.elementCount();
QPointF *points = (QPointF *) path.points();
const QPainterPath::ElementType *types = path.elements();
if (types) {
int first = 0;
int last;
while (first < count) {
while (first < count && types[first] != QPainterPath::MoveToElement) ++first;
last = first + 1;
while (last < count && types[last] == QPainterPath::LineToElement) ++last;
strokePolygonCosmetic(points + first, last - first,
path.hasImplicitClose() && last == count // only close last one..
? WindingMode
: PolylineMode);
first = last;
}
} else {
strokePolygonCosmetic(points, count,
path.hasImplicitClose()
? WindingMode
: PolylineMode);
}
} else if (s->flags.non_complex_pen && path.shape() == QVectorPath::LinesHint) {
qreal width = s->lastPen.isCosmetic()
? (qpen_widthf(s->lastPen) == 0 ? 1 : qpen_widthf(s->lastPen))
: qpen_widthf(s->lastPen) * s->txscale;
int dashIndex = 0;
qreal dashOffset = s->lastPen.dashOffset();
bool inDash = true;
qreal patternLength = 0;
const QVector<qreal> pattern = s->lastPen.dashPattern();
for (int i = 0; i < pattern.size(); ++i)
patternLength += pattern.at(i);
if (patternLength > 0) {
int n = qFloor(dashOffset / patternLength);
dashOffset -= n * patternLength;
while (dashOffset > pattern.at(dashIndex)) {
dashOffset -= pattern.at(dashIndex);
dashIndex = (dashIndex + 1) % pattern.size();
inDash = !inDash;
}
}
Q_D(QRasterPaintEngine);
d->initializeRasterizer(&s->penData);
int lineCount = path.elementCount() / 2;
const QLineF *lines = reinterpret_cast<const QLineF *>(path.points());
for (int i = 0; i < lineCount; ++i) {
dashOffset = s->lastPen.dashOffset();
if (lines[i].p1() == lines[i].p2()) {
if (s->lastPen.capStyle() != Qt::FlatCap) {
QPointF p = lines[i].p1();
QLineF line = s->matrix.map(QLineF(QPointF(p.x() - width*0.5, p.y()),
QPointF(p.x() + width*0.5, p.y())));
d->rasterizer->rasterizeLine(line.p1(), line.p2(), 1);
}
continue;
}
const QLineF line = s->matrix.map(lines[i]);
if (qpen_style(s->lastPen) == Qt::SolidLine) {
d->rasterizer->rasterizeLine(line.p1(), line.p2(),
width / line.length(),
s->lastPen.capStyle() == Qt::SquareCap);
} else {
d->rasterizeLine_dashed(line, width,
&dashIndex, &dashOffset, &inDash);
}
}
}
else
QPaintEngineEx::stroke(path, pen);
}
static inline QRect toNormalizedFillRect(const QRectF &rect)
{
int x1 = qRound(rect.x() + aliasedCoordinateDelta);
int y1 = qRound(rect.y() + aliasedCoordinateDelta);
int x2 = qRound(rect.right() + aliasedCoordinateDelta);
int y2 = qRound(rect.bottom() + aliasedCoordinateDelta);
if (x2 < x1)
qSwap(x1, x2);
if (y2 < y1)
qSwap(y1, y2);
return QRect(x1, y1, x2 - x1, y2 - y1);
}
/*!
\internal
*/
void QRasterPaintEngine::fill(const QVectorPath &path, const QBrush &brush)
{
if (path.isEmpty())
return;
#ifdef QT_DEBUG_DRAW
QRectF rf = path.controlPointRect();
qDebug() << "QRasterPaintEngine::fill(): "
<< "size=" << path.elementCount()
<< ", hints=" << hex << path.hints()
<< rf << brush;
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensureBrush(brush);
if (!s->brushData.blend)
return;
if (path.shape() == QVectorPath::RectangleHint) {
if (!s->flags.antialiased && s->matrix.type() <= QTransform::TxScale) {
const qreal *p = path.points();
QPointF tl = QPointF(p[0], p[1]) * s->matrix;
QPointF br = QPointF(p[4], p[5]) * s->matrix;
fillRect_normalized(toNormalizedFillRect(QRectF(tl, br)), &s->brushData, d);
return;
}
ensureState();
if (s->flags.tx_noshear) {
d->initializeRasterizer(&s->brushData);
// ### Is normalizing really nessesary here?
const qreal *p = path.points();
QRectF r = QRectF(p[0], p[1], p[2] - p[0], p[7] - p[1]).normalized();
if (!r.isEmpty()) {
const QPointF a = s->matrix.map((r.topLeft() + r.bottomLeft()) * 0.5f);
const QPointF b = s->matrix.map((r.topRight() + r.bottomRight()) * 0.5f);
d->rasterizer->rasterizeLine(a, b, r.height() / r.width());
}
return;
}
}
if (path.shape() == QVectorPath::EllipseHint) {
if (!s->flags.antialiased && s->matrix.type() <= QTransform::TxScale) {
const qreal *p = path.points();
QPointF tl = QPointF(p[0], p[1]) * s->matrix;
QPointF br = QPointF(p[4], p[5]) * s->matrix;
QRectF r = s->matrix.mapRect(QRectF(tl, br));
ProcessSpans penBlend = d->getPenFunc(r, &s->penData);
ProcessSpans brushBlend = d->getBrushFunc(r, &s->brushData);
const QRect brect = QRect(int(r.x()), int(r.y()),
int_dim(r.x(), r.width()),
int_dim(r.y(), r.height()));
if (brect == r) {
drawEllipse_midpoint_i(brect, d->deviceRect, penBlend, brushBlend,
&s->penData, &s->brushData);
return;
}
}
}
// ### Optimize for non transformed ellipses and rectangles...
QRectF cpRect = path.controlPointRect();
const QRect deviceRect = s->matrix.mapRect(cpRect).toRect();
ProcessSpans blend = d->getBrushFunc(deviceRect, &s->brushData);
// ### Falcon
// const bool do_clip = (deviceRect.left() < -QT_RASTER_COORD_LIMIT
// || deviceRect.right() > QT_RASTER_COORD_LIMIT
// || deviceRect.top() < -QT_RASTER_COORD_LIMIT
// || deviceRect.bottom() > QT_RASTER_COORD_LIMIT);
// ### Falonc: implement....
// if (!s->flags.antialiased && !do_clip) {
// d->initializeRasterizer(&s->brushData);
// d->rasterizer->rasterize(path * d->matrix, path.fillRule());
// return;
// }
ensureOutlineMapper();
d->rasterize(d->outlineMapper->convertPath(path), blend, &s->brushData, d->rasterBuffer.data());
}
void QRasterPaintEngine::fillRect(const QRectF &r, QSpanData *data)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (!s->flags.antialiased) {
uint txop = s->matrix.type();
if (txop == QTransform::TxNone) {
fillRect_normalized(toNormalizedFillRect(r), data, d);
return;
} else if (txop == QTransform::TxTranslate) {
const QRect rr = toNormalizedFillRect(r.translated(s->matrix.dx(), s->matrix.dy()));
fillRect_normalized(rr, data, d);
return;
} else if (txop == QTransform::TxScale) {
const QRect rr = toNormalizedFillRect(s->matrix.mapRect(r));
fillRect_normalized(rr, data, d);
return;
}
}
ensureState();
if (s->flags.tx_noshear) {
d->initializeRasterizer(data);
QRectF nr = r.normalized();
if (!nr.isEmpty()) {
const QPointF a = s->matrix.map((nr.topLeft() + nr.bottomLeft()) * 0.5f);
const QPointF b = s->matrix.map((nr.topRight() + nr.bottomRight()) * 0.5f);
d->rasterizer->rasterizeLine(a, b, nr.height() / nr.width());
}
return;
}
QPainterPath path;
path.addRect(r);
ensureOutlineMapper();
fillPath(path, data);
}
/*!
\reimp
*/
void QRasterPaintEngine::fillRect(const QRectF &r, const QBrush &brush)
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::fillRecct(): " << r << brush;
#endif
QRasterPaintEngineState *s = state();
ensureBrush(brush);
if (!s->brushData.blend)
return;
fillRect(r, &s->brushData);
}
/*!
\reimp
*/
void QRasterPaintEngine::fillRect(const QRectF &r, const QColor &color)
{
#ifdef QT_DEBUG_DRAW
qDebug() << "QRasterPaintEngine::fillRect(): " << r << color;
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
d->solid_color_filler.solid.color = PREMUL(ARGB_COMBINE_ALPHA(color.rgba(), s->intOpacity));
if ((d->solid_color_filler.solid.color & 0xff000000) == 0
&& s->composition_mode == QPainter::CompositionMode_SourceOver) {
return;
}
d->solid_color_filler.clip = d->clip();
d->solid_color_filler.adjustSpanMethods();
fillRect(r, &d->solid_color_filler);
}
static inline bool isAbove(const QPointF *a, const QPointF *b)
{
return a->y() < b->y();
}
static bool splitPolygon(const QPointF *points, int pointCount, QVector<QPointF> *upper, QVector<QPointF> *lower)
{
Q_ASSERT(upper);
Q_ASSERT(lower);
Q_ASSERT(pointCount >= 2);
QVector<const QPointF *> sorted;
sorted.reserve(pointCount);
upper->reserve(pointCount * 3 / 4);
lower->reserve(pointCount * 3 / 4);
for (int i = 0; i < pointCount; ++i)
sorted << points + i;
qSort(sorted.begin(), sorted.end(), isAbove);
qreal splitY = sorted.at(sorted.size() / 2)->y();
const QPointF *end = points + pointCount;
const QPointF *last = end - 1;
QVector<QPointF> *bin[2] = { upper, lower };
for (const QPointF *p = points; p < end; ++p) {
int side = p->y() < splitY;
int lastSide = last->y() < splitY;
if (side != lastSide) {
if (qFuzzyCompare(p->y(), splitY)) {
bin[!side]->append(*p);
} else if (qFuzzyCompare(last->y(), splitY)) {
bin[side]->append(*last);
} else {
QPointF delta = *p - *last;
QPointF intersection(p->x() + delta.x() * (splitY - p->y()) / delta.y(), splitY);
bin[0]->append(intersection);
bin[1]->append(intersection);
}
}
bin[side]->append(*p);
last = p;
}
// give up if we couldn't reduce the point count
return upper->size() < pointCount && lower->size() < pointCount;
}
/*!
\internal
*/
void QRasterPaintEngine::fillPolygon(const QPointF *points, int pointCount, PolygonDrawMode mode)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
const int maxPoints = 0xffff;
// max amount of points that raster engine can reliably handle
if (pointCount > maxPoints) {
QVector<QPointF> upper, lower;
if (splitPolygon(points, pointCount, &upper, &lower)) {
fillPolygon(upper.constData(), upper.size(), mode);
fillPolygon(lower.constData(), lower.size(), mode);
} else
qWarning("Polygon too complex for filling.");
return;
}
// Compose polygon fill..,
QVectorPath vp((qreal *) points, pointCount, 0, QVectorPath::polygonFlags(mode));
ensureOutlineMapper();
QT_FT_Outline *outline = d->outlineMapper->convertPath(vp);
// scanconvert.
ProcessSpans brushBlend = d->getBrushFunc(d->outlineMapper->controlPointRect,
&s->brushData);
d->rasterize(outline, brushBlend, &s->brushData, d->rasterBuffer.data());
}
/*!
\reimp
*/
void QRasterPaintEngine::drawPolygon(const QPointF *points, int pointCount, PolygonDrawMode mode)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug(" - QRasterPaintEngine::drawPolygon(F), pointCount=%d", pointCount);
for (int i=0; i<pointCount; ++i)
qDebug() << " - " << points[i];
#endif
Q_ASSERT(pointCount >= 2);
if (mode != PolylineMode && isRect((qreal *) points, pointCount)) {
QRectF r(points[0], points[2]);
drawRects(&r, 1);
return;
}
ensurePen();
ensureBrush();
if (mode != PolylineMode) {
// Do the fill...
if (s->brushData.blend) {
d->outlineMapper->setCoordinateRounding(s->penData.blend && s->flags.fast_pen && s->lastPen.brush().isOpaque());
fillPolygon(points, pointCount, mode);
d->outlineMapper->setCoordinateRounding(false);
}
}
// Do the outline...
if (s->penData.blend) {
if (s->flags.fast_pen && s->lastPen.brush().isOpaque())
strokePolygonCosmetic(points, pointCount, mode);
else {
QVectorPath vp((qreal *) points, pointCount, 0, QVectorPath::polygonFlags(mode));
QPaintEngineEx::stroke(vp, s->lastPen);
}
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawPolygon(const QPoint *points, int pointCount, PolygonDrawMode mode)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
qDebug(" - QRasterPaintEngine::drawPolygon(I), pointCount=%d", pointCount);
for (int i=0; i<pointCount; ++i)
qDebug() << " - " << points[i];
#endif
Q_ASSERT(pointCount >= 2);
if (mode != PolylineMode && isRect((int *) points, pointCount)) {
QRect r(points[0].x(),
points[0].y(),
points[2].x() - points[0].x(),
points[2].y() - points[0].y());
drawRects(&r, 1);
return;
}
ensureState();
ensurePen();
if (!(s->flags.int_xform && s->flags.fast_pen && (!s->penData.blend || s->pen.brush().isOpaque()))) {
// this calls the float version
QPaintEngineEx::drawPolygon(points, pointCount, mode);
return;
}
// Do the fill
if (mode != PolylineMode) {
ensureBrush();
if (s->brushData.blend) {
// Compose polygon fill..,
ensureOutlineMapper();
d->outlineMapper->setCoordinateRounding(s->penData.blend != 0);
d->outlineMapper->beginOutline(mode == WindingMode ? Qt::WindingFill : Qt::OddEvenFill);
d->outlineMapper->moveTo(*points);
const QPoint *p = points;
const QPoint *ep = points + pointCount - 1;
do {
d->outlineMapper->lineTo(*(++p));
} while (p < ep);
d->outlineMapper->endOutline();
// scanconvert.
ProcessSpans brushBlend = d->getBrushFunc(d->outlineMapper->controlPointRect,
&s->brushData);
d->rasterize(d->outlineMapper->outline(), brushBlend, &s->brushData, d->rasterBuffer.data());
d->outlineMapper->setCoordinateRounding(false);
}
}
// Do the outline...
if (s->penData.blend) {
if (s->flags.fast_pen && s->lastPen.brush().isOpaque())
strokePolygonCosmetic(points, pointCount, mode);
else {
int count = pointCount * 2;
QVarLengthArray<qreal> fpoints(count);
#ifdef Q_WS_MAC
for (int i=0; i<count; i+=2) {
fpoints[i] = ((int *) points)[i+1];
fpoints[i+1] = ((int *) points)[i];
}
#else
for (int i=0; i<count; ++i)
fpoints[i] = ((int *) points)[i];
#endif
QVectorPath vp((qreal *) fpoints.data(), pointCount, 0, QVectorPath::polygonFlags(mode));
QPaintEngineEx::stroke(vp, s->lastPen);
}
}
}
/*!
\internal
*/
void QRasterPaintEngine::strokePolygonCosmetic(const QPointF *points, int pointCount, PolygonDrawMode mode)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
Q_ASSERT(s->penData.blend);
Q_ASSERT(s->flags.fast_pen);
bool needs_closing = mode != PolylineMode && points[0] != points[pointCount-1];
// Use fast path for 0 width / trivial pens.
QIntRect devRect;
devRect.set(d->deviceRect);
LineDrawMode mode_for_last = (s->lastPen.capStyle() != Qt::FlatCap
? LineDrawIncludeLastPixel
: LineDrawNormal);
int dashOffset = int(s->lastPen.dashOffset());
const QPointF offs(aliasedCoordinateDelta, aliasedCoordinateDelta);
// Draw all the line segments.
for (int i=1; i<pointCount; ++i) {
QPointF lp1 = points[i-1] * s->matrix + offs;
QPointF lp2 = points[i] * s->matrix + offs;
const QRectF brect(lp1, lp2);
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine) {
drawLine_midpoint_i(qFloor(lp1.x()), qFloor(lp1.y()),
qFloor(lp2.x()), qFloor(lp2.y()),
penBlend, &s->penData,
i == pointCount - 1 ? mode_for_last : LineDrawIncludeLastPixel,
devRect);
} else {
drawLine_midpoint_dashed_i(qFloor(lp1.x()), qFloor(lp1.y()),
qFloor(lp2.x()), qFloor(lp2.y()),
&s->lastPen,
penBlend, &s->penData,
i == pointCount - 1 ? mode_for_last : LineDrawIncludeLastPixel,
devRect, &dashOffset);
}
}
// Polygons are implicitly closed.
if (needs_closing) {
QPointF lp1 = points[pointCount-1] * s->matrix + offs;
QPointF lp2 = points[0] * s->matrix + offs;
const QRectF brect(lp1, lp2);
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine) {
drawLine_midpoint_i(qFloor(lp1.x()), qFloor(lp1.y()),
qFloor(lp2.x()), qFloor(lp2.y()),
penBlend, &s->penData,
LineDrawIncludeLastPixel,
devRect);
} else {
drawLine_midpoint_dashed_i(qFloor(lp1.x()), qFloor(lp1.y()),
qFloor(lp2.x()), qFloor(lp2.y()),
&s->lastPen,
penBlend, &s->penData,
LineDrawIncludeLastPixel,
devRect, &dashOffset);
}
}
}
/*!
\internal
*/
void QRasterPaintEngine::strokePolygonCosmetic(const QPoint *points, int pointCount, PolygonDrawMode mode)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
// We assert here because this function is called from drawRects
// and drawPolygon and they already do ensurePen(), so we skip that
// here to avoid duplicate checks..
Q_ASSERT(s->penData.blend);
bool needs_closing = mode != PolylineMode && points[0] != points[pointCount-1];
QIntRect devRect;
devRect.set(d->deviceRect);
LineDrawMode mode_for_last = (s->lastPen.capStyle() != Qt::FlatCap
? LineDrawIncludeLastPixel
: LineDrawNormal);
int m11 = int(s->matrix.m11());
int m22 = int(s->matrix.m22());
int dx = int(s->matrix.dx());
int dy = int(s->matrix.dy());
int m13 = int(s->matrix.m13());
int m23 = int(s->matrix.m23());
bool affine = !m13 && !m23;
int dashOffset = int(s->lastPen.dashOffset());
if (affine) {
// Draw all the line segments.
for (int i=1; i<pointCount; ++i) {
const QPoint lp1 = points[i-1] * s->matrix;
const QPoint lp2 = points[i] * s->matrix;
const QRect brect(lp1, lp2);
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(lp1.x(), lp1.y(),
lp2.x(), lp2.y(),
penBlend, &s->penData,
i == pointCount - 1 ? mode_for_last : LineDrawIncludeLastPixel,
devRect);
else
drawLine_midpoint_dashed_i(lp1.x(), lp1.y(),
lp2.x(), lp2.y(),
&s->lastPen,
penBlend, &s->penData,
i == pointCount - 1 ? mode_for_last : LineDrawIncludeLastPixel,
devRect, &dashOffset);
}
// Polygons are implicitly closed.
if (needs_closing) {
const QPoint lp1 = points[pointCount - 1] * s->matrix;
const QPoint lp2 = points[0] * s->matrix;
const QRect brect(lp1, lp2);
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(lp1.x(), lp1.y(),
lp2.x(), lp2.y(),
penBlend, &s->penData, LineDrawIncludeLastPixel,
devRect);
else
drawLine_midpoint_dashed_i(lp1.x(), lp1.y(),
lp2.x(), lp2.y(),
&s->lastPen,
penBlend, &s->penData, LineDrawIncludeLastPixel,
devRect, &dashOffset);
}
} else {
// Draw all the line segments.
for (int i=1; i<pointCount; ++i) {
int x1 = points[i-1].x() * m11 + dx;
int y1 = points[i-1].y() * m22 + dy;
qreal w = m13*points[i-1].x() + m23*points[i-1].y() + 1.;
w = 1/w;
x1 = int(x1*w);
y1 = int(y1*w);
int x2 = points[i].x() * m11 + dx;
int y2 = points[i].y() * m22 + dy;
w = m13*points[i].x() + m23*points[i].y() + 1.;
w = 1/w;
x2 = int(x2*w);
y2 = int(y2*w);
const QRect brect(x1, y1, x2 - x1 + 1, y2 - y1 + 1);
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(x1, y1, x2, y2,
penBlend, &s->penData,
i == pointCount - 1 ? mode_for_last : LineDrawIncludeLastPixel,
devRect);
else
drawLine_midpoint_dashed_i(x1, y1, x2, y2,
&s->lastPen,
penBlend, &s->penData,
i == pointCount - 1 ? mode_for_last : LineDrawIncludeLastPixel,
devRect, &dashOffset);
}
int x1 = points[pointCount-1].x() * m11 + dx;
int y1 = points[pointCount-1].y() * m22 + dy;
qreal w = m13*points[pointCount-1].x() + m23*points[pointCount-1].y() + 1.;
w = 1/w;
x1 = int(x1*w);
y1 = int(y1*w);
int x2 = points[0].x() * m11 + dx;
int y2 = points[0].y() * m22 + dy;
w = m13*points[0].x() + m23*points[0].y() + 1.;
w = 1/w;
x2 = int(x2 * w);
y2 = int(y2 * w);
// Polygons are implicitly closed.
if (needs_closing) {
const QRect brect(x1, y1, x2 - x1 + 1, y2 - y1 + 1);
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(x1, y1, x2, y2,
penBlend, &s->penData, LineDrawIncludeLastPixel,
devRect);
else
drawLine_midpoint_dashed_i(x1, y1, x2, y2,
&s->lastPen,
penBlend, &s->penData, LineDrawIncludeLastPixel,
devRect, &dashOffset);
}
}
}
/*!
\internal
*/
void QRasterPaintEngine::drawPixmap(const QPointF &pos, const QPixmap &pixmap)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawPixmap(), pos=" << pos << " pixmap=" << pixmap.size() << "depth=" << pixmap.depth();
#endif
if (pixmap.data->classId() == QPixmapData::RasterClass) {
const QImage &image = static_cast<QRasterPixmapData *>(pixmap.data.data())->image;
if (image.depth() == 1) {
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (s->matrix.type() <= QTransform::TxTranslate) {
ensurePen();
drawBitmap(pos + QPointF(s->matrix.dx(), s->matrix.dy()), image, &s->penData);
} else {
drawImage(pos, d->rasterBuffer->colorizeBitmap(image, s->pen.color()));
}
} else {
QRasterPaintEngine::drawImage(pos, image);
}
} else {
const QImage image = pixmap.toImage();
if (pixmap.depth() == 1) {
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (s->matrix.type() <= QTransform::TxTranslate) {
ensurePen();
drawBitmap(pos + QPointF(s->matrix.dx(), s->matrix.dy()), image, &s->penData);
} else {
drawImage(pos, d->rasterBuffer->colorizeBitmap(image, s->pen.color()));
}
} else {
QRasterPaintEngine::drawImage(pos, image);
}
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawPixmap(const QRectF &r, const QPixmap &pixmap, const QRectF &sr)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawPixmap(), r=" << r << " sr=" << sr << " pixmap=" << pixmap.size() << "depth=" << pixmap.depth();
#endif
if (pixmap.data->classId() == QPixmapData::RasterClass) {
const QImage &image = static_cast<QRasterPixmapData *>(pixmap.data.data())->image;
if (image.depth() == 1) {
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (s->matrix.type() <= QTransform::TxTranslate
&& r.size() == sr.size()
&& r.size() == pixmap.size()) {
ensurePen();
drawBitmap(r.topLeft() + QPointF(s->matrix.dx(), s->matrix.dy()), image, &s->penData);
return;
} else {
drawImage(r, d->rasterBuffer->colorizeBitmap(image, s->pen.color()), sr);
}
} else {
drawImage(r, image, sr);
}
} else {
const QImage image = pixmap.toImage();
if (image.depth() == 1) {
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (s->matrix.type() <= QTransform::TxTranslate
&& r.size() == sr.size()
&& r.size() == pixmap.size()) {
ensurePen();
drawBitmap(r.topLeft() + QPointF(s->matrix.dx(), s->matrix.dy()), image, &s->penData);
return;
} else {
drawImage(r, d->rasterBuffer->colorizeBitmap(image, s->pen.color()), sr);
}
} else {
drawImage(r, image, sr);
}
}
}
// assumes that rect has positive width and height
static inline const QRect toRect_normalized(const QRectF &rect)
{
const int x = qRound(rect.x());
const int y = qRound(rect.y());
const int w = int(rect.width() + qreal(0.5));
const int h = int(rect.height() + qreal(0.5));
return QRect(x, y, w, h);
}
static inline int fast_ceil_positive(const qreal &v)
{
const int iv = int(v);
if (v - iv == 0)
return iv;
else
return iv + 1;
}
static inline const QRect toAlignedRect_positive(const QRectF &rect)
{
const int xmin = int(rect.x());
const int xmax = int(fast_ceil_positive(rect.right()));
const int ymin = int(rect.y());
const int ymax = int(fast_ceil_positive(rect.bottom()));
return QRect(xmin, ymin, xmax - xmin, ymax - ymin);
}
/*!
\internal
*/
void QRasterPaintEngine::drawImage(const QPointF &p, const QImage &img)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawImage(), p=" << p << " image=" << img.size() << "depth=" << img.depth();
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (s->matrix.type() > QTransform::TxTranslate) {
drawImage(QRectF(p.x(), p.y(), img.width(), img.height()),
img,
QRectF(0, 0, img.width(), img.height()));
} else {
const QClipData *clip = d->clip();
QPointF pt(p.x() + s->matrix.dx(), p.y() + s->matrix.dy());
if (s->flags.fast_images) {
SrcOverBlendFunc func = qBlendFunctions[d->rasterBuffer->format][img.format()];
if (func) {
if (!clip) {
d->drawImage(pt, img, func, d->deviceRect, s->intOpacity);
return;
} else if (clip->hasRectClip) {
d->drawImage(pt, img, func, clip->clipRect, s->intOpacity);
return;
}
}
}
d->image_filler.clip = clip;
d->image_filler.initTexture(&img, s->intOpacity, QTextureData::Plain, img.rect());
if (!d->image_filler.blend)
return;
d->image_filler.dx = -pt.x();
d->image_filler.dy = -pt.y();
QRect rr = img.rect().translated(qRound(pt.x()), qRound(pt.y()));
fillRect_normalized(rr, &d->image_filler, d);
}
}
QRectF qt_mapRect_non_normalizing(const QRectF &r, const QTransform &t)
{
return QRectF(r.topLeft() * t, r.bottomRight() * t);
}
/*!
\reimp
*/
void QRasterPaintEngine::drawImage(const QRectF &r, const QImage &img, const QRectF &sr,
Qt::ImageConversionFlags)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawImage(), r=" << r << " sr=" << sr << " image=" << img.size() << "depth=" << img.depth();
#endif
if (r.isEmpty())
return;
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
int sr_l = qFloor(sr.left());
int sr_r = qCeil(sr.right()) - 1;
int sr_t = qFloor(sr.top());
int sr_b = qCeil(sr.bottom()) - 1;
if (!s->flags.antialiased && sr_l == sr_r && sr_t == sr_b) {
// as fillRect will apply the aliased coordinate delta we need to
// subtract it here as we don't use it for image drawing
QTransform old = s->matrix;
s->matrix = s->matrix * QTransform::fromTranslate(-aliasedCoordinateDelta, -aliasedCoordinateDelta);
// Do whatever fillRect() does, but without premultiplying the color if it's already premultiplied.
QRgb color = img.pixel(sr_l, sr_t);
switch (img.format()) {
case QImage::Format_ARGB32_Premultiplied:
case QImage::Format_ARGB8565_Premultiplied:
case QImage::Format_ARGB6666_Premultiplied:
case QImage::Format_ARGB8555_Premultiplied:
case QImage::Format_ARGB4444_Premultiplied:
// Combine premultiplied color with the opacity set on the painter.
d->solid_color_filler.solid.color =
((((color & 0x00ff00ff) * s->intOpacity) >> 8) & 0x00ff00ff)
| ((((color & 0xff00ff00) >> 8) * s->intOpacity) & 0xff00ff00);
break;
default:
d->solid_color_filler.solid.color = PREMUL(ARGB_COMBINE_ALPHA(color, s->intOpacity));
break;
}
if ((d->solid_color_filler.solid.color & 0xff000000) == 0
&& s->composition_mode == QPainter::CompositionMode_SourceOver) {
return;
}
d->solid_color_filler.clip = d->clip();
d->solid_color_filler.adjustSpanMethods();
fillRect(r, &d->solid_color_filler);
s->matrix = old;
return;
}
bool stretch_sr = r.width() != sr.width() || r.height() != sr.height();
const QClipData *clip = d->clip();
if (s->matrix.type() > QTransform::TxTranslate || stretch_sr) {
if (s->flags.fast_images) {
if (s->matrix.type() > QTransform::TxScale) {
SrcOverTransformFunc func = qTransformFunctions[d->rasterBuffer->format][img.format()];
if (func && (!clip || clip->hasRectClip)) {
func(d->rasterBuffer->buffer(), d->rasterBuffer->bytesPerLine(), img.bits(),
img.bytesPerLine(), r, sr, !clip ? d->deviceRect : clip->clipRect,
s->matrix, s->intOpacity);
return;
}
} else {
SrcOverScaleFunc func = qScaleFunctions[d->rasterBuffer->format][img.format()];
if (func && (!clip || clip->hasRectClip)) {
func(d->rasterBuffer->buffer(), d->rasterBuffer->bytesPerLine(),
img.bits(), img.bytesPerLine(),
qt_mapRect_non_normalizing(r, s->matrix), sr,
!clip ? d->deviceRect : clip->clipRect,
s->intOpacity);
return;
}
}
}
QTransform copy = s->matrix;
copy.translate(r.x(), r.y());
if (stretch_sr)
copy.scale(r.width() / sr.width(), r.height() / sr.height());
copy.translate(-sr.x(), -sr.y());
d->image_filler_xform.clip = clip;
d->image_filler_xform.initTexture(&img, s->intOpacity, QTextureData::Plain, toAlignedRect_positive(sr));
if (!d->image_filler_xform.blend)
return;
d->image_filler_xform.setupMatrix(copy, s->flags.bilinear);
if (!s->flags.antialiased && s->matrix.type() == QTransform::TxScale) {
QRectF rr = s->matrix.mapRect(r);
const int x1 = qRound(rr.x());
const int y1 = qRound(rr.y());
const int x2 = qRound(rr.right());
const int y2 = qRound(rr.bottom());
fillRect_normalized(QRect(x1, y1, x2-x1, y2-y1), &d->image_filler_xform, d);
return;
}
#ifdef QT_FAST_SPANS
ensureState();
if (s->flags.tx_noshear || s->matrix.type() == QTransform::TxScale) {
d->initializeRasterizer(&d->image_filler_xform);
d->rasterizer->setAntialiased(s->flags.antialiased);
const QPointF offs = s->flags.antialiased ? QPointF() : QPointF(aliasedCoordinateDelta, aliasedCoordinateDelta);
const QRectF &rect = r.normalized();
const QPointF a = s->matrix.map((rect.topLeft() + rect.bottomLeft()) * 0.5f) - offs;
const QPointF b = s->matrix.map((rect.topRight() + rect.bottomRight()) * 0.5f) - offs;
if (s->flags.tx_noshear)
d->rasterizer->rasterizeLine(a, b, rect.height() / rect.width());
else
d->rasterizer->rasterizeLine(a, b, qAbs((s->matrix.m22() * rect.height()) / (s->matrix.m11() * rect.width())));
return;
}
#endif
const qreal offs = s->flags.antialiased ? qreal(0) : aliasedCoordinateDelta;
QPainterPath path;
path.addRect(r);
QTransform m = s->matrix;
s->matrix = QTransform(m.m11(), m.m12(), m.m13(),
m.m21(), m.m22(), m.m23(),
m.m31() - offs, m.m32() - offs, m.m33());
fillPath(path, &d->image_filler_xform);
s->matrix = m;
} else {
if (s->flags.fast_images) {
SrcOverBlendFunc func = qBlendFunctions[d->rasterBuffer->format][img.format()];
if (func) {
QPointF pt(r.x() + s->matrix.dx(), r.y() + s->matrix.dy());
if (!clip) {
d->drawImage(pt, img, func, d->deviceRect, s->intOpacity, sr.toRect());
return;
} else if (clip->hasRectClip) {
d->drawImage(pt, img, func, clip->clipRect, s->intOpacity, sr.toRect());
return;
}
}
}
d->image_filler.clip = clip;
d->image_filler.initTexture(&img, s->intOpacity, QTextureData::Plain, toAlignedRect_positive(sr));
if (!d->image_filler.blend)
return;
d->image_filler.dx = -(r.x() + s->matrix.dx()) + sr.x();
d->image_filler.dy = -(r.y() + s->matrix.dy()) + sr.y();
QRectF rr = r;
rr.translate(s->matrix.dx(), s->matrix.dy());
const int x1 = qRound(rr.x());
const int y1 = qRound(rr.y());
const int x2 = qRound(rr.right());
const int y2 = qRound(rr.bottom());
fillRect_normalized(QRect(x1, y1, x2-x1, y2-y1), &d->image_filler, d);
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawTiledPixmap(const QRectF &r, const QPixmap &pixmap, const QPointF &sr)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawTiledPixmap(), r=" << r << "pixmap=" << pixmap.size();
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
QImage image;
if (pixmap.data->classId() == QPixmapData::RasterClass) {
image = static_cast<QRasterPixmapData *>(pixmap.data.data())->image;
} else {
image = pixmap.toImage();
}
if (image.depth() == 1)
image = d->rasterBuffer->colorizeBitmap(image, s->pen.color());
if (s->matrix.type() > QTransform::TxTranslate) {
QTransform copy = s->matrix;
copy.translate(r.x(), r.y());
copy.translate(-sr.x(), -sr.y());
d->image_filler_xform.clip = d->clip();
d->image_filler_xform.initTexture(&image, s->intOpacity, QTextureData::Tiled);
if (!d->image_filler_xform.blend)
return;
d->image_filler_xform.setupMatrix(copy, s->flags.bilinear);
#ifdef QT_FAST_SPANS
ensureState();
if (s->flags.tx_noshear || s->matrix.type() == QTransform::TxScale) {
d->initializeRasterizer(&d->image_filler_xform);
d->rasterizer->setAntialiased(s->flags.antialiased);
const QRectF &rect = r.normalized();
const QPointF a = s->matrix.map((rect.topLeft() + rect.bottomLeft()) * 0.5f);
const QPointF b = s->matrix.map((rect.topRight() + rect.bottomRight()) * 0.5f);
if (s->flags.tx_noshear)
d->rasterizer->rasterizeLine(a, b, rect.height() / rect.width());
else
d->rasterizer->rasterizeLine(a, b, qAbs((s->matrix.m22() * rect.height()) / (s->matrix.m11() * rect.width())));
return;
}
#endif
QPainterPath path;
path.addRect(r);
fillPath(path, &d->image_filler_xform);
} else {
d->image_filler.clip = d->clip();
d->image_filler.initTexture(&image, s->intOpacity, QTextureData::Tiled);
if (!d->image_filler.blend)
return;
d->image_filler.dx = -(r.x() + s->matrix.dx()) + sr.x();
d->image_filler.dy = -(r.y() + s->matrix.dy()) + sr.y();
QRectF rr = r;
rr.translate(s->matrix.dx(), s->matrix.dy());
fillRect_normalized(rr.toRect().normalized(), &d->image_filler, d);
}
}
//QWS hack
static inline bool monoVal(const uchar* s, int x)
{
return (s[x>>3] << (x&7)) & 0x80;
}
/*!
\internal
*/
void QRasterPaintEngine::alphaPenBlt(const void* src, int bpl, int depth, int rx,int ry,int w,int h)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
if (!s->penData.blend)
return;
QRasterBuffer *rb = d->rasterBuffer.data();
const QRect rect(rx, ry, w, h);
const QClipData *clip = d->clip();
bool unclipped = false;
if (clip) {
// inlined QRect::intersects
const bool intersects = qMax(clip->xmin, rect.left()) <= qMin(clip->xmax - 1, rect.right())
&& qMax(clip->ymin, rect.top()) <= qMin(clip->ymax - 1, rect.bottom());
if (clip->hasRectClip) {
unclipped = rx > clip->xmin
&& rx + w < clip->xmax
&& ry > clip->ymin
&& ry + h < clip->ymax;
}
if (!intersects)
return;
} else {
// inlined QRect::intersects
const bool intersects = qMax(0, rect.left()) <= qMin(rb->width() - 1, rect.right())
&& qMax(0, rect.top()) <= qMin(rb->height() - 1, rect.bottom());
if (!intersects)
return;
// inlined QRect::contains
const bool contains = rect.left() >= 0 && rect.right() < rb->width()
&& rect.top() >= 0 && rect.bottom() < rb->height();
unclipped = contains && d->isUnclipped_normalized(rect);
}
ProcessSpans blend = unclipped ? s->penData.unclipped_blend : s->penData.blend;
const uchar * scanline = static_cast<const uchar *>(src);
if (s->flags.fast_text) {
if (unclipped) {
if (depth == 1) {
if (s->penData.bitmapBlit) {
s->penData.bitmapBlit(rb, rx, ry, s->penData.solid.color,
scanline, w, h, bpl);
return;
}
} else if (depth == 8) {
if (s->penData.alphamapBlit) {
s->penData.alphamapBlit(rb, rx, ry, s->penData.solid.color,
scanline, w, h, bpl, 0);
return;
}
} else if (depth == 32) {
// (A)RGB Alpha mask where the alpha component is not used.
if (s->penData.alphaRGBBlit) {
s->penData.alphaRGBBlit(rb, rx, ry, s->penData.solid.color,
(const uint *) scanline, w, h, bpl / 4, 0);
return;
}
}
} else if (d->deviceDepth == 32 && (depth == 8 || depth == 32)) {
// (A)RGB Alpha mask where the alpha component is not used.
if (!clip) {
int nx = qMax(0, rx);
int ny = qMax(0, ry);
// Move scanline pointer to compensate for moved x and y
int xdiff = nx - rx;
int ydiff = ny - ry;
scanline += ydiff * bpl;
scanline += xdiff * (depth == 32 ? 4 : 1);
w -= xdiff;
h -= ydiff;
if (nx + w > d->rasterBuffer->width())
w = d->rasterBuffer->width() - nx;
if (ny + h > d->rasterBuffer->height())
h = d->rasterBuffer->height() - ny;
rx = nx;
ry = ny;
}
if (depth == 8 && s->penData.alphamapBlit) {
s->penData.alphamapBlit(rb, rx, ry, s->penData.solid.color,
scanline, w, h, bpl, clip);
} else if (depth == 32 && s->penData.alphaRGBBlit) {
s->penData.alphaRGBBlit(rb, rx, ry, s->penData.solid.color,
(const uint *) scanline, w, h, bpl / 4, clip);
}
return;
}
}
int x0 = 0;
if (rx < 0) {
x0 = -rx;
w -= x0;
}
int y0 = 0;
if (ry < 0) {
y0 = -ry;
scanline += bpl * y0;
h -= y0;
}
w = qMin(w, rb->width() - qMax(0, rx));
h = qMin(h, rb->height() - qMax(0, ry));
if (w <= 0 || h <= 0)
return;
const int NSPANS = 256;
QSpan spans[NSPANS];
int current = 0;
const int x1 = x0 + w;
const int y1 = y0 + h;
if (depth == 1) {
for (int y = y0; y < y1; ++y) {
for (int x = x0; x < x1; ) {
if (!monoVal(scanline, x)) {
++x;
continue;
}
if (current == NSPANS) {
blend(current, spans, &s->penData);
current = 0;
}
spans[current].x = x + rx;
spans[current].y = y + ry;
spans[current].coverage = 255;
int len = 1;
++x;
// extend span until we find a different one.
while (x < x1 && monoVal(scanline, x)) {
++x;
++len;
}
spans[current].len = len;
++current;
}
scanline += bpl;
}
} else if (depth == 8) {
for (int y = y0; y < y1; ++y) {
for (int x = x0; x < x1; ) {
// Skip those with 0 coverage
if (scanline[x] == 0) {
++x;
continue;
}
if (current == NSPANS) {
blend(current, spans, &s->penData);
current = 0;
}
int coverage = scanline[x];
spans[current].x = x + rx;
spans[current].y = y + ry;
spans[current].coverage = coverage;
int len = 1;
++x;
// extend span until we find a different one.
while (x < x1 && scanline[x] == coverage) {
++x;
++len;
}
spans[current].len = len;
++current;
}
scanline += bpl;
}
} else { // 32-bit alpha...
uint *sl = (uint *) src;
for (int y = y0; y < y1; ++y) {
for (int x = x0; x < x1; ) {
// Skip those with 0 coverage
if ((sl[x] & 0x00ffffff) == 0) {
++x;
continue;
}
if (current == NSPANS) {
blend(current, spans, &s->penData);
current = 0;
}
uint rgbCoverage = sl[x];
int coverage = qGreen(rgbCoverage);
spans[current].x = x + rx;
spans[current].y = y + ry;
spans[current].coverage = coverage;
int len = 1;
++x;
// extend span until we find a different one.
while (x < x1 && sl[x] == rgbCoverage) {
++x;
++len;
}
spans[current].len = len;
++current;
}
sl += bpl / sizeof(uint);
}
}
// qDebug() << "alphaPenBlt: num spans=" << current
// << "span:" << spans->x << spans->y << spans->len << spans->coverage;
// Call span func for current set of spans.
if (current != 0)
blend(current, spans, &s->penData);
}
void QRasterPaintEngine::drawCachedGlyphs(const QPointF &p, const QTextItemInt &ti)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
QVarLengthArray<QFixedPoint> positions;
QVarLengthArray<glyph_t> glyphs;
QTransform matrix = s->matrix;
matrix.translate(p.x(), p.y());
ti.fontEngine->getGlyphPositions(ti.glyphs, matrix, ti.flags, glyphs, positions);
QFontEngineGlyphCache::Type glyphType = ti.fontEngine->glyphFormat >= 0 ? QFontEngineGlyphCache::Type(ti.fontEngine->glyphFormat) : d->glyphCacheType;
QImageTextureGlyphCache *cache =
(QImageTextureGlyphCache *) ti.fontEngine->glyphCache(0, glyphType, s->matrix);
if (!cache) {
cache = new QImageTextureGlyphCache(glyphType, s->matrix);
ti.fontEngine->setGlyphCache(0, cache);
}
cache->populate(ti, glyphs, positions);
const QImage &image = cache->image();
int bpl = image.bytesPerLine();
int depth = image.depth();
int rightShift = 0;
int leftShift = 0;
if (depth == 32)
leftShift = 2; // multiply by 4
else if (depth == 1)
rightShift = 3; // divide by 8
int margin = cache->glyphMargin();
const QFixed offs = QFixed::fromReal(aliasedCoordinateDelta);
const uchar *bits = image.bits();
for (int i=0; i<glyphs.size(); ++i) {
const QTextureGlyphCache::Coord &c = cache->coords.value(glyphs[i]);
int x = qFloor(positions[i].x + offs) + c.baseLineX - margin;
int y = qFloor(positions[i].y + offs) - c.baseLineY - margin;
// printf("drawing [%d %d %d %d] baseline [%d %d], glyph: %d, to: %d %d, pos: %d %d\n",
// c.x, c.y,
// c.w, c.h,
// c.baseLineX, c.baseLineY,
// glyphs[i],
// x, y,
// positions[i].x.toInt(), positions[i].y.toInt());
alphaPenBlt(bits + ((c.x << leftShift) >> rightShift) + c.y * bpl, bpl, depth, x, y, c.w, c.h);
}
return;
}
#if defined(Q_OS_SYMBIAN) && defined(QT_NO_FREETYPE)
void QRasterPaintEngine::drawGlyphsS60(const QPointF &p, const QTextItemInt &ti)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
QFontEngine *fontEngine = ti.fontEngine;
if (fontEngine->type() != QFontEngine::S60FontEngine) {
QPaintEngineEx::drawTextItem(p, ti);
return;
}
QFontEngineS60 *fe = static_cast<QFontEngineS60 *>(fontEngine);
QVarLengthArray<QFixedPoint> positions;
QVarLengthArray<glyph_t> glyphs;
QTransform matrix = s->matrix;
matrix.translate(p.x(), p.y());
if (matrix.type() == QTransform::TxScale)
fe->setFontScale(matrix.m11());
ti.fontEngine->getGlyphPositions(ti.glyphs, matrix, ti.flags, glyphs, positions);
const QFixed aliasDelta = QFixed::fromReal(aliasedCoordinateDelta);
for (int i=0; i<glyphs.size(); ++i) {
TOpenFontCharMetrics tmetrics;
const TUint8 *glyphBitmapBytes;
TSize glyphBitmapSize;
fe->getCharacterData(glyphs[i], tmetrics, glyphBitmapBytes, glyphBitmapSize);
const glyph_metrics_t metrics = ti.fontEngine->boundingBox(glyphs[i]);
const int x = qFloor(positions[i].x + metrics.x + aliasDelta);
const int y = qFloor(positions[i].y + metrics.y + aliasDelta);
alphaPenBlt(glyphBitmapBytes, glyphBitmapSize.iWidth, 8, x, y, glyphBitmapSize.iWidth, glyphBitmapSize.iHeight);
}
if (matrix.type() == QTransform::TxScale)
fe->setFontScale(1.0);
return;
}
#endif // Q_OS_SYMBIAN && QT_NO_FREETYPE
/*!
* Returns true if the rectangle is completly within the current clip
* state of the paint engine.
*/
bool QRasterPaintEnginePrivate::isUnclipped_normalized(const QRect &r) const
{
const QClipData *cl = clip();
if (!cl) {
// inline contains() for performance (we know the rects are normalized)
const QRect &r1 = deviceRect;
return (r.left() >= r1.left() && r.right() <= r1.right()
&& r.top() >= r1.top() && r.bottom() <= r1.bottom());
}
if (cl->hasRectClip) {
// currently all painting functions clips to deviceRect internally
if (cl->clipRect == deviceRect)
return true;
// inline contains() for performance (we know the rects are normalized)
const QRect &r1 = cl->clipRect;
return (r.left() >= r1.left() && r.right() <= r1.right()
&& r.top() >= r1.top() && r.bottom() <= r1.bottom());
} else {
return qt_region_strictContains(cl->clipRegion, r);
}
}
bool QRasterPaintEnginePrivate::isUnclipped(const QRect &rect,
int penWidth) const
{
Q_Q(const QRasterPaintEngine);
const QRasterPaintEngineState *s = q->state();
const QClipData *cl = clip();
if (!cl) {
QRect r = rect.normalized();
// inline contains() for performance (we know the rects are normalized)
const QRect &r1 = deviceRect;
return (r.left() >= r1.left() && r.right() <= r1.right()
&& r.top() >= r1.top() && r.bottom() <= r1.bottom());
}
// currently all painting functions that call this function clip to deviceRect internally
if (cl->hasRectClip && cl->clipRect == deviceRect)
return true;
if (s->flags.antialiased)
++penWidth;
QRect r = rect.normalized();
if (penWidth > 0) {
r.setX(r.x() - penWidth);
r.setY(r.y() - penWidth);
r.setWidth(r.width() + 2 * penWidth);
r.setHeight(r.height() + 2 * penWidth);
}
if (cl->hasRectClip) {
// inline contains() for performance (we know the rects are normalized)
const QRect &r1 = cl->clipRect;
return (r.left() >= r1.left() && r.right() <= r1.right()
&& r.top() >= r1.top() && r.bottom() <= r1.bottom());
} else {
return qt_region_strictContains(cl->clipRegion, r);
}
}
inline bool QRasterPaintEnginePrivate::isUnclipped(const QRectF &rect,
int penWidth) const
{
return isUnclipped(rect.normalized().toAlignedRect(), penWidth);
}
inline ProcessSpans
QRasterPaintEnginePrivate::getBrushFunc(const QRect &rect,
const QSpanData *data) const
{
return isUnclipped(rect, 0) ? data->unclipped_blend : data->blend;
}
inline ProcessSpans
QRasterPaintEnginePrivate::getBrushFunc(const QRectF &rect,
const QSpanData *data) const
{
return isUnclipped(rect, 0) ? data->unclipped_blend : data->blend;
}
inline ProcessSpans
QRasterPaintEnginePrivate::getPenFunc(const QRect &rect,
const QSpanData *data) const
{
Q_Q(const QRasterPaintEngine);
const QRasterPaintEngineState *s = q->state();
if (!s->flags.fast_pen && s->matrix.type() > QTransform::TxTranslate)
return data->blend;
const int penWidth = s->flags.fast_pen ? 1 : qCeil(s->pen.widthF());
return isUnclipped(rect, penWidth) ? data->unclipped_blend : data->blend;
}
inline ProcessSpans
QRasterPaintEnginePrivate::getPenFunc(const QRectF &rect,
const QSpanData *data) const
{
Q_Q(const QRasterPaintEngine);
const QRasterPaintEngineState *s = q->state();
if (!s->flags.fast_pen && s->matrix.type() > QTransform::TxTranslate)
return data->blend;
const int penWidth = s->flags.fast_pen ? 1 : qCeil(s->lastPen.widthF());
return isUnclipped(rect, penWidth) ? data->unclipped_blend : data->blend;
}
/*!
\reimp
*/
void QRasterPaintEngine::drawTextItem(const QPointF &p, const QTextItem &textItem)
{
const QTextItemInt &ti = static_cast<const QTextItemInt &>(textItem);
QRasterPaintEngineState *s = state();
#ifdef QT_DEBUG_DRAW
Q_D(QRasterPaintEngine);
fprintf(stderr," - QRasterPaintEngine::drawTextItem(), (%.2f,%.2f), string=%s ct=%d\n",
p.x(), p.y(), QString::fromRawData(ti.chars, ti.num_chars).toLatin1().data(),
d->glyphCacheType);
#endif
ensurePen();
ensureState();
#if defined (Q_WS_WIN) || defined(Q_WS_MAC)
bool drawCached = true;
if (s->matrix.type() >= QTransform::TxProject)
drawCached = false;
// don't try to cache huge fonts
const qreal pixelSize = ti.fontEngine->fontDef.pixelSize;
if (pixelSize * pixelSize * qAbs(s->matrix.determinant()) >= 64 * 64)
drawCached = false;
// ### Remove the TestFontEngine and Box engine crap, in these
// ### cases we should delegate painting to the font engine
// ### directly...
#if defined(Q_WS_WIN) && !defined(Q_WS_WINCE)
QFontEngine::Type fontEngineType = ti.fontEngine->type();
// qDebug() << "type" << fontEngineType << s->matrix.type();
if ((fontEngineType == QFontEngine::Win && !((QFontEngineWin *) ti.fontEngine)->ttf && s->matrix.type() > QTransform::TxTranslate)
|| (s->matrix.type() <= QTransform::TxTranslate
&& (fontEngineType == QFontEngine::TestFontEngine
|| fontEngineType == QFontEngine::Box))) {
drawCached = false;
}
#else
if (s->matrix.type() > QTransform::TxTranslate)
drawCached = false;
#endif
if (drawCached) {
drawCachedGlyphs(p, ti);
return;
}
#elif defined (Q_OS_SYMBIAN) && defined(QT_NO_FREETYPE) // Q_WS_WIN || Q_WS_MAC
if (s->matrix.type() <= QTransform::TxTranslate
|| (s->matrix.type() == QTransform::TxScale
&& (qFuzzyCompare(s->matrix.m11(), s->matrix.m22())))) {
drawGlyphsS60(p, ti);
return;
}
#else // Q_WS_WIN || Q_WS_MAC
QFontEngine *fontEngine = ti.fontEngine;
#if defined(Q_WS_QWS)
if (fontEngine->type() == QFontEngine::Box) {
fontEngine->draw(this, qFloor(p.x() + aliasedCoordinateDelta), qFloor(p.y() + aliasedCoordinateDelta), ti);
return;
}
if (s->matrix.type() < QTransform::TxScale
&& (fontEngine->type() == QFontEngine::QPF1 || fontEngine->type() == QFontEngine::QPF2
|| (fontEngine->type() == QFontEngine::Proxy
&& !(static_cast<QProxyFontEngine *>(fontEngine)->drawAsOutline()))
)) {
fontEngine->draw(this, qFloor(p.x() + aliasedCoordinateDelta), qFloor(p.y() + aliasedCoordinateDelta), ti);
return;
}
#endif // Q_WS_QWS
#if (defined(Q_WS_X11) || defined(Q_WS_QWS) || defined(Q_OS_SYMBIAN)) && !defined(QT_NO_FREETYPE)
#if defined(Q_WS_QWS) && !defined(QT_NO_QWS_QPF2)
if (fontEngine->type() == QFontEngine::QPF2) {
QFontEngine *renderingEngine = static_cast<QFontEngineQPF *>(fontEngine)->renderingEngine();
if (renderingEngine)
fontEngine = renderingEngine;
}
#endif
if (fontEngine->type() != QFontEngine::Freetype) {
QPaintEngineEx::drawTextItem(p, ti);
return;
}
QFontEngineFT *fe = static_cast<QFontEngineFT *>(fontEngine);
QTransform matrix = s->matrix;
matrix.translate(p.x(), p.y());
QVarLengthArray<QFixedPoint> positions;
QVarLengthArray<glyph_t> glyphs;
fe->getGlyphPositions(ti.glyphs, matrix, ti.flags, glyphs, positions);
if (glyphs.size() == 0)
return;
// only use subpixel antialiasing when drawing to widgets
QFontEngineFT::GlyphFormat neededFormat =
painter()->device()->devType() == QInternal::Widget
? fe->defaultGlyphFormat()
: QFontEngineFT::Format_A8;
if (d_func()->mono_surface
|| fe->isBitmapFont() // alphaPenBlt can handle mono, too
)
neededFormat = QFontEngineFT::Format_Mono;
if (neededFormat == QFontEngineFT::Format_None)
neededFormat = QFontEngineFT::Format_A8;
QFontEngineFT::QGlyphSet *gset = fe->defaultGlyphs();
if (s->matrix.type() >= QTransform::TxScale) {
if (s->matrix.isAffine())
gset = fe->loadTransformedGlyphSet(s->matrix);
else
gset = 0;
}
if (!gset || gset->outline_drawing
|| !fe->loadGlyphs(gset, glyphs.data(), glyphs.size(), neededFormat))
{
QPaintEngine::drawTextItem(p, ti);
return;
}
QFixed offs = QFixed::fromReal(aliasedCoordinateDelta);
FT_Face lockedFace = 0;
int depth;
switch (neededFormat) {
case QFontEngineFT::Format_Mono:
depth = 1;
break;
case QFontEngineFT::Format_A8:
depth = 8;
break;
case QFontEngineFT::Format_A32:
depth = 32;
break;
default:
Q_ASSERT(false);
depth = 0;
};
for(int i = 0; i < glyphs.size(); i++) {
QFontEngineFT::Glyph *glyph = gset->glyph_data.value(glyphs[i]);
if (!glyph || glyph->format != neededFormat) {
if (!lockedFace)
lockedFace = fe->lockFace();
glyph = fe->loadGlyph(gset, glyphs[i], neededFormat);
}
if (!glyph || !glyph->data)
continue;
int pitch;
switch (neededFormat) {
case QFontEngineFT::Format_Mono:
pitch = ((glyph->width + 31) & ~31) >> 3;
break;
case QFontEngineFT::Format_A8:
pitch = (glyph->width + 3) & ~3;
break;
case QFontEngineFT::Format_A32:
pitch = glyph->width * 4;
break;
default:
Q_ASSERT(false);
pitch = 0;
};
alphaPenBlt(glyph->data, pitch, depth,
qFloor(positions[i].x + offs) + glyph->x,
qFloor(positions[i].y + offs) - glyph->y,
glyph->width, glyph->height);
}
if (lockedFace)
fe->unlockFace();
return;
#endif
#endif
QPaintEngineEx::drawTextItem(p, ti);
}
/*!
\reimp
*/
void QRasterPaintEngine::drawPoints(const QPointF *points, int pointCount)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensurePen();
qreal pw = s->lastPen.widthF();
if (!s->flags.fast_pen && (s->matrix.type() > QTransform::TxTranslate || pw > 1)) {
QPaintEngineEx::drawPoints(points, pointCount);
} else {
if (!s->penData.blend)
return;
QVarLengthArray<QT_FT_Span, 4096> array(pointCount);
QT_FT_Span span = { 0, 1, 0, 255 };
const QPointF *end = points + pointCount;
qreal trans_x, trans_y;
int x, y;
int left = d->deviceRect.x();
int right = left + d->deviceRect.width();
int top = d->deviceRect.y();
int bottom = top + d->deviceRect.height();
int count = 0;
while (points < end) {
s->matrix.map(points->x(), points->y(), &trans_x, &trans_y);
x = qFloor(trans_x);
y = qFloor(trans_y);
if (x >= left && x < right && y >= top && y < bottom) {
if (count > 0) {
const QT_FT_Span &last = array[count - 1];
// spans must be sorted on y (primary) and x (secondary)
if (y < last.y || (y == last.y && x < last.x)) {
s->penData.blend(count, array.constData(), &s->penData);
count = 0;
}
}
span.x = x;
span.y = y;
array[count++] = span;
}
++points;
}
if (count > 0)
s->penData.blend(count, array.constData(), &s->penData);
}
}
void QRasterPaintEngine::drawPoints(const QPoint *points, int pointCount)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensurePen();
double pw = s->lastPen.widthF();
if (!s->flags.fast_pen && (s->matrix.type() > QTransform::TxTranslate || pw > 1)) {
QPaintEngineEx::drawPoints(points, pointCount);
} else {
if (!s->penData.blend)
return;
QVarLengthArray<QT_FT_Span, 4096> array(pointCount);
QT_FT_Span span = { 0, 1, 0, 255 };
const QPoint *end = points + pointCount;
qreal trans_x, trans_y;
int x, y;
int left = d->deviceRect.x();
int right = left + d->deviceRect.width();
int top = d->deviceRect.y();
int bottom = top + d->deviceRect.height();
int count = 0;
while (points < end) {
s->matrix.map(points->x(), points->y(), &trans_x, &trans_y);
x = qFloor(trans_x);
y = qFloor(trans_y);
if (x >= left && x < right && y >= top && y < bottom) {
if (count > 0) {
const QT_FT_Span &last = array[count - 1];
// spans must be sorted on y (primary) and x (secondary)
if (y < last.y || (y == last.y && x < last.x)) {
s->penData.blend(count, array.constData(), &s->penData);
count = 0;
}
}
span.x = x;
span.y = y;
array[count++] = span;
}
++points;
}
if (count > 0)
s->penData.blend(count, array.constData(), &s->penData);
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawLines(const QLine *lines, int lineCount)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawLine()";
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensurePen();
if (s->flags.fast_pen) {
QIntRect bounds; bounds.set(d->deviceRect);
LineDrawMode mode = s->lastPen.capStyle() == Qt::FlatCap
? LineDrawNormal
: LineDrawIncludeLastPixel;
int m11 = int(s->matrix.m11());
int m22 = int(s->matrix.m22());
int dx = qFloor(s->matrix.dx() + aliasedCoordinateDelta);
int dy = qFloor(s->matrix.dy() + aliasedCoordinateDelta);
for (int i=0; i<lineCount; ++i) {
int dashOffset = int(s->lastPen.dashOffset());
if (s->flags.int_xform) {
const QLine &l = lines[i];
int x1 = l.x1() * m11 + dx;
int y1 = l.y1() * m22 + dy;
int x2 = l.x2() * m11 + dx;
int y2 = l.y2() * m22 + dy;
const QRect brect(QPoint(x1, y1), QPoint(x2, y2));
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(x1, y1, x2, y2,
penBlend, &s->penData, mode, bounds);
else
drawLine_midpoint_dashed_i(x1, y1, x2, y2,
&s->lastPen, penBlend,
&s->penData, mode, bounds,
&dashOffset);
} else {
QLineF line = lines[i] * s->matrix;
const QRectF brect(QPointF(line.x1(), line.y1()),
QPointF(line.x2(), line.y2()));
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(int(line.x1()), int(line.y1()),
int(line.x2()), int(line.y2()),
penBlend, &s->penData, mode, bounds);
else
drawLine_midpoint_dashed_i(int(line.x1()), int(line.y1()),
int(line.x2()), int(line.y2()),
&s->lastPen, penBlend,
&s->penData, mode, bounds,
&dashOffset);
}
}
} else if (s->penData.blend) {
QPaintEngineEx::drawLines(lines, lineCount);
}
}
void QRasterPaintEnginePrivate::rasterizeLine_dashed(QLineF line,
qreal width,
int *dashIndex,
qreal *dashOffset,
bool *inDash)
{
Q_Q(QRasterPaintEngine);
QRasterPaintEngineState *s = q->state();
const QPen &pen = s->lastPen;
const bool squareCap = (pen.capStyle() == Qt::SquareCap);
const QVector<qreal> pattern = pen.dashPattern();
qreal length = line.length();
Q_ASSERT(length > 0);
while (length > 0) {
const bool rasterize = *inDash;
qreal dash = (pattern.at(*dashIndex) - *dashOffset) * width;
QLineF l = line;
if (dash >= length) {
dash = length;
*dashOffset += dash / width;
length = 0;
} else {
*dashOffset = 0;
*inDash = !(*inDash);
*dashIndex = (*dashIndex + 1) % pattern.size();
length -= dash;
l.setLength(dash);
line.setP1(l.p2());
}
if (rasterize && dash != 0)
rasterizer->rasterizeLine(l.p1(), l.p2(), width / dash, squareCap);
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawLines(const QLineF *lines, int lineCount)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - QRasterPaintEngine::drawLine()";
#endif
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensurePen();
if (!s->penData.blend)
return;
if (s->flags.fast_pen) {
QIntRect bounds;
bounds.set(d->deviceRect);
LineDrawMode mode = s->lastPen.capStyle() == Qt::FlatCap
? LineDrawNormal
: LineDrawIncludeLastPixel;
for (int i=0; i<lineCount; ++i) {
int dashOffset = int(s->lastPen.dashOffset());
QLineF line = (lines[i] * s->matrix).translated(aliasedCoordinateDelta, aliasedCoordinateDelta);
const QRectF brect(QPointF(line.x1(), line.y1()),
QPointF(line.x2(), line.y2()));
ProcessSpans penBlend = d->getPenFunc(brect, &s->penData);
if (qpen_style(s->lastPen) == Qt::SolidLine)
drawLine_midpoint_i(int(line.x1()), int(line.y1()),
int(line.x2()), int(line.y2()),
penBlend, &s->penData, mode, bounds);
else
drawLine_midpoint_dashed_i(int(line.x1()), int(line.y1()),
int(line.x2()), int(line.y2()),
&s->lastPen,
penBlend, &s->penData, mode,
bounds, &dashOffset);
}
} else {
QPaintEngineEx::drawLines(lines, lineCount);
}
}
/*!
\reimp
*/
void QRasterPaintEngine::drawEllipse(const QRectF &rect)
{
Q_D(QRasterPaintEngine);
QRasterPaintEngineState *s = state();
ensurePen();
if (((qpen_style(s->lastPen) == Qt::SolidLine && s->flags.fast_pen)
|| (qpen_style(s->lastPen) == Qt::NoPen && !s->flags.antialiased))
&& qMax(rect.width(), rect.height()) < QT_RASTER_COORD_LIMIT
&& s->matrix.type() <= QTransform::TxScale) // no shear
{
ensureBrush();
const QRectF r = s->matrix.mapRect(rect);
ProcessSpans penBlend = d->getPenFunc(r, &s->penData);
ProcessSpans brushBlend = d->getBrushFunc(r, &s->brushData);
const QRect brect = QRect(int(r.x()), int(r.y()),
int_dim(r.x(), r.width()),
int_dim(r.y(), r.height()));
if (brect == r) {
drawEllipse_midpoint_i(brect, d->deviceRect, penBlend, brushBlend,
&s->penData, &s->brushData);
return;
}
}
QPaintEngineEx::drawEllipse(rect);
}
/*!
\internal
*/
#ifdef Q_WS_MAC
void QRasterPaintEngine::setCGContext(CGContextRef ctx)
{
Q_D(QRasterPaintEngine);
d->cgContext = ctx;
}
/*!
\internal
*/
CGContextRef QRasterPaintEngine::getCGContext() const
{
Q_D(const QRasterPaintEngine);
return d->cgContext;
}
#endif
#ifdef Q_WS_WIN
/*!
\internal
*/
void QRasterPaintEngine::setDC(HDC hdc) {
Q_D(QRasterPaintEngine);
d->hdc = hdc;
}
/*!
\internal
*/
HDC QRasterPaintEngine::getDC() const
{
Q_D(const QRasterPaintEngine);
return d->hdc;
}
/*!
\internal
*/
void QRasterPaintEngine::releaseDC(HDC) const
{
}
#endif
/*!
\internal
*/
QPoint QRasterPaintEngine::coordinateOffset() const
{
return QPoint(0, 0);
}
/*!
Draws the given color \a spans with the specified \a color. The \a
count parameter specifies the number of spans.
The default implementation does nothing; reimplement this function
to draw the given color \a spans with the specified \a color. Note
that this function \e must be reimplemented if the framebuffer is
not memory-mapped.
\sa drawBufferSpan()
*/
#if defined(Q_WS_QWS) && !defined(QT_NO_RASTERCALLBACKS)
void QRasterPaintEngine::drawColorSpans(const QSpan *spans, int count, uint color)
{
Q_UNUSED(spans);
Q_UNUSED(count);
Q_UNUSED(color);
qFatal("QRasterPaintEngine::drawColorSpans must be reimplemented on "
"a non memory-mapped device");
}
/*!
\fn void QRasterPaintEngine::drawBufferSpan(const uint *buffer, int size, int x, int y, int length, uint alpha)
Draws the given \a buffer.
The default implementation does nothing; reimplement this function
to draw a buffer that contains more than one color. Note that this
function \e must be reimplemented if the framebuffer is not
memory-mapped.
The \a size parameter specifies the total size of the given \a
buffer, while the \a length parameter specifies the number of
pixels to draw. The buffer's position is given by (\a x, \a
y). The provided \a alpha value is added to each pixel in the
buffer when drawing.
\sa drawColorSpans()
*/
void QRasterPaintEngine::drawBufferSpan(const uint *buffer, int bufsize,
int x, int y, int length, uint const_alpha)
{
Q_UNUSED(buffer);
Q_UNUSED(bufsize);
Q_UNUSED(x);
Q_UNUSED(y);
Q_UNUSED(length);
Q_UNUSED(const_alpha);
qFatal("QRasterPaintEngine::drawBufferSpan must be reimplemented on "
"a non memory-mapped device");
}
#endif // Q_WS_QWS
void QRasterPaintEngine::drawBitmap(const QPointF &pos, const QImage &image, QSpanData *fg)
{
Q_ASSERT(fg);
if (!fg->blend)
return;
Q_D(QRasterPaintEngine);
Q_ASSERT(image.depth() == 1);
const int spanCount = 256;
QT_FT_Span spans[spanCount];
int n = 0;
// Boundaries
int w = image.width();
int h = image.height();
int ymax = qMin(qRound(pos.y() + h), d->rasterBuffer->height());
int ymin = qMax(qRound(pos.y()), 0);
int xmax = qMin(qRound(pos.x() + w), d->rasterBuffer->width());
int xmin = qMax(qRound(pos.x()), 0);
int x_offset = xmin - qRound(pos.x());
QImage::Format format = image.format();
for (int y = ymin; y < ymax; ++y) {
const uchar *src = image.scanLine(y - qRound(pos.y()));
if (format == QImage::Format_MonoLSB) {
for (int x = 0; x < xmax - xmin; ++x) {
int src_x = x + x_offset;
uchar pixel = src[src_x >> 3];
if (!pixel) {
x += 7 - (src_x%8);
continue;
}
if (pixel & (0x1 << (src_x & 7))) {
spans[n].x = xmin + x;
spans[n].y = y;
spans[n].coverage = 255;
int len = 1;
while (src_x < w-1 && src[(src_x+1) >> 3] & (0x1 << ((src_x+1) & 7))) {
++src_x;
++len;
}
spans[n].len = ((len + spans[n].x) > xmax) ? (xmax - spans[n].x) : len;
x += len;
++n;
if (n == spanCount) {
fg->blend(n, spans, fg);
n = 0;
}
}
}
} else {
for (int x = 0; x < xmax - xmin; ++x) {
int src_x = x + x_offset;
uchar pixel = src[src_x >> 3];
if (!pixel) {
x += 7 - (src_x%8);
continue;
}
if (pixel & (0x80 >> (x & 7))) {
spans[n].x = xmin + x;
spans[n].y = y;
spans[n].coverage = 255;
int len = 1;
while (src_x < w-1 && src[(src_x+1) >> 3] & (0x80 >> ((src_x+1) & 7))) {
++src_x;
++len;
}
spans[n].len = ((len + spans[n].x) > xmax) ? (xmax - spans[n].x) : len;
x += len;
++n;
if (n == spanCount) {
fg->blend(n, spans, fg);
n = 0;
}
}
}
}
}
if (n) {
fg->blend(n, spans, fg);
n = 0;
}
}
/*!
\enum QRasterPaintEngine::ClipType
\internal
\value RectClip Indicates that the currently set clip is a single rectangle.
\value ComplexClip Indicates that the currently set clip is a combination of several shapes.
*/
/*!
\internal
Returns the type of the clip currently set.
*/
QRasterPaintEngine::ClipType QRasterPaintEngine::clipType() const
{
Q_D(const QRasterPaintEngine);
const QClipData *clip = d->clip();
if (!clip || clip->hasRectClip)
return RectClip;
else
return ComplexClip;
}
/*!
\internal
Returns the bounding rect of the currently set clip.
*/
QRect QRasterPaintEngine::clipBoundingRect() const
{
Q_D(const QRasterPaintEngine);
const QClipData *clip = d->clip();
if (!clip)
return d->deviceRect;
if (clip->hasRectClip)
return clip->clipRect;
return QRect(clip->xmin, clip->ymin, clip->xmax - clip->xmin, clip->ymax - clip->ymin);
}
static void qt_merge_clip(const QClipData *c1, const QClipData *c2, QClipData *result)
{
Q_ASSERT(c1->clipSpanHeight == c2->clipSpanHeight && c1->clipSpanHeight == result->clipSpanHeight);
QVarLengthArray<short, 4096> buffer;
QClipData::ClipLine *c1ClipLines = const_cast<QClipData *>(c1)->clipLines();
QClipData::ClipLine *c2ClipLines = const_cast<QClipData *>(c2)->clipLines();
result->initialize();
for (int y = 0; y < c1->clipSpanHeight; ++y) {
const QSpan *c1_spans = c1ClipLines[y].spans;
int c1_count = c1ClipLines[y].count;
const QSpan *c2_spans = c2ClipLines[y].spans;
int c2_count = c2ClipLines[y].count;
if (c1_count == 0 && c2_count == 0)
continue;
if (c1_count == 0) {
result->appendSpans(c2_spans, c2_count);
continue;
} else if (c2_count == 0) {
result->appendSpans(c1_spans, c1_count);
continue;
}
// we need to merge the two
// find required length
int max = qMax(c1_spans[c1_count - 1].x + c1_spans[c1_count - 1].len,
c2_spans[c2_count - 1].x + c2_spans[c2_count - 1].len);
buffer.resize(max);
memset(buffer.data(), 0, buffer.size() * sizeof(short));
// Fill with old spans.
for (int i = 0; i < c1_count; ++i) {
const QSpan *cs = c1_spans + i;
for (int j=cs->x; j<cs->x + cs->len; ++j)
buffer[j] = cs->coverage;
}
// Fill with new spans
for (int i = 0; i < c2_count; ++i) {
const QSpan *cs = c2_spans + i;
for (int j = cs->x; j < cs->x + cs->len; ++j) {
buffer[j] += cs->coverage;
if (buffer[j] > 255)
buffer[j] = 255;
}
}
int x = 0;
while (x<max) {
// Skip to next span
while (x < max && buffer[x] == 0) ++x;
if (x >= max) break;
int sx = x;
int coverage = buffer[x];
// Find length of span
while (x < max && buffer[x] == coverage)
++x;
result->appendSpan(sx, x - sx, y, coverage);
}
}
}
void QRasterPaintEnginePrivate::initializeRasterizer(QSpanData *data)
{
Q_Q(QRasterPaintEngine);
QRasterPaintEngineState *s = q->state();
rasterizer->setAntialiased(s->flags.antialiased);
QRect clipRect(deviceRect);
ProcessSpans blend;
// ### get from optimized rectbased QClipData
const QClipData *c = clip();
if (c) {
const QRect r(QPoint(c->xmin, c->ymin),
QSize(c->xmax - c->xmin, c->ymax - c->ymin));
clipRect = clipRect.intersected(r);
blend = data->blend;
} else {
blend = data->unclipped_blend;
}
rasterizer->setClipRect(clipRect);
rasterizer->initialize(blend, data);
}
void QRasterPaintEnginePrivate::rasterize(QT_FT_Outline *outline,
ProcessSpans callback,
QSpanData *spanData, QRasterBuffer *rasterBuffer)
{
if (!callback || !outline)
return;
Q_Q(QRasterPaintEngine);
QRasterPaintEngineState *s = q->state();
if (!s->flags.antialiased) {
initializeRasterizer(spanData);
const Qt::FillRule fillRule = outline->flags == QT_FT_OUTLINE_NONE
? Qt::WindingFill
: Qt::OddEvenFill;
rasterizer->rasterize(outline, fillRule);
return;
}
rasterize(outline, callback, (void *)spanData, rasterBuffer);
}
void QRasterPaintEnginePrivate::rasterize(QT_FT_Outline *outline,
ProcessSpans callback,
void *userData, QRasterBuffer *)
{
if (!callback || !outline)
return;
Q_Q(QRasterPaintEngine);
QRasterPaintEngineState *s = q->state();
if (!s->flags.antialiased) {
rasterizer->setAntialiased(s->flags.antialiased);
rasterizer->setClipRect(deviceRect);
rasterizer->initialize(callback, userData);
const Qt::FillRule fillRule = outline->flags == QT_FT_OUTLINE_NONE
? Qt::WindingFill
: Qt::OddEvenFill;
rasterizer->rasterize(outline, fillRule);
return;
}
void *data = userData;
QT_FT_BBox clip_box = { deviceRect.x(),
deviceRect.y(),
deviceRect.x() + deviceRect.width(),
deviceRect.y() + deviceRect.height() };
QT_FT_Raster_Params rasterParams;
rasterParams.target = 0;
rasterParams.source = outline;
rasterParams.flags = QT_FT_RASTER_FLAG_CLIP;
rasterParams.gray_spans = 0;
rasterParams.black_spans = 0;
rasterParams.bit_test = 0;
rasterParams.bit_set = 0;
rasterParams.user = data;
rasterParams.clip_box = clip_box;
bool done = false;
int error;
while (!done) {
rasterParams.flags |= (QT_FT_RASTER_FLAG_AA | QT_FT_RASTER_FLAG_DIRECT);
rasterParams.gray_spans = callback;
error = qt_ft_grays_raster.raster_render(*grayRaster.data(), &rasterParams);
// Out of memory, reallocate some more and try again...
if (error == -6) { // -6 is Result_err_OutOfMemory
int new_size = rasterPoolSize * 2;
if (new_size > 1024 * 1024) {
qWarning("QPainter: Rasterization of primitive failed");
return;
}
#if defined(Q_WS_WIN64)
_aligned_free(rasterPoolBase);
#else
free(rasterPoolBase);
#endif
rasterPoolSize = new_size;
rasterPoolBase =
#if defined(Q_WS_WIN64)
// We make use of setjmp and longjmp in qgrayraster.c which requires
// 16-byte alignment, hence we hardcode this requirement here..
(unsigned char *) _aligned_malloc(rasterPoolSize, sizeof(void*) * 2);
#else
(unsigned char *) malloc(rasterPoolSize);
#endif
Q_CHECK_PTR(rasterPoolBase); // note: we just freed the old rasterPoolBase. I hope it's not fatal.
qt_ft_grays_raster.raster_done(*grayRaster.data());
qt_ft_grays_raster.raster_new(0, grayRaster.data());
qt_ft_grays_raster.raster_reset(*grayRaster.data(), rasterPoolBase, rasterPoolSize);
} else {
done = true;
}
}
}
void QRasterPaintEnginePrivate::recalculateFastImages()
{
Q_Q(QRasterPaintEngine);
QRasterPaintEngineState *s = q->state();
s->flags.fast_images = !(s->renderHints & QPainter::SmoothPixmapTransform)
&& rasterBuffer->compositionMode == QPainter::CompositionMode_SourceOver
&& s->matrix.type() <= QTransform::TxShear;
}
QImage QRasterBuffer::colorizeBitmap(const QImage &image, const QColor &color)
{
Q_ASSERT(image.depth() == 1);
QImage sourceImage = image.convertToFormat(QImage::Format_MonoLSB);
QImage dest = QImage(sourceImage.size(), QImage::Format_ARGB32_Premultiplied);
QRgb fg = PREMUL(color.rgba());
QRgb bg = 0;
int height = sourceImage.height();
int width = sourceImage.width();
for (int y=0; y<height; ++y) {
uchar *source = sourceImage.scanLine(y);
QRgb *target = reinterpret_cast<QRgb *>(dest.scanLine(y));
if (!source || !target)
QT_THROW(std::bad_alloc()); // we must have run out of memory
for (int x=0; x < width; ++x)
target[x] = (source[x>>3] >> (x&7)) & 1 ? fg : bg;
}
return dest;
}
QRasterBuffer::~QRasterBuffer()
{
}
void QRasterBuffer::init()
{
compositionMode = QPainter::CompositionMode_SourceOver;
monoDestinationWithClut = false;
destColor0 = 0;
destColor1 = 0;
}
QImage::Format QRasterBuffer::prepare(QImage *image)
{
m_buffer = (uchar *)image->bits();
m_width = qMin(QT_RASTER_COORD_LIMIT, image->width());
m_height = qMin(QT_RASTER_COORD_LIMIT, image->height());
bytes_per_pixel = image->depth()/8;
bytes_per_line = image->bytesPerLine();
format = image->format();
drawHelper = qDrawHelper + format;
if (image->depth() == 1 && image->colorTable().size() == 2) {
monoDestinationWithClut = true;
destColor0 = PREMUL(image->colorTable()[0]);
destColor1 = PREMUL(image->colorTable()[1]);
}
return format;
}
void QRasterBuffer::resetBuffer(int val)
{
memset(m_buffer, val, m_height*bytes_per_line);
}
#if defined(Q_WS_QWS)
void QRasterBuffer::prepare(QCustomRasterPaintDevice *device)
{
m_buffer = reinterpret_cast<uchar*>(device->memory());
m_width = qMin(QT_RASTER_COORD_LIMIT, device->width());
m_height = qMin(QT_RASTER_COORD_LIMIT, device->height());
bytes_per_pixel = device->depth() / 8;
bytes_per_line = device->bytesPerLine();
format = device->format();
#ifndef QT_NO_RASTERCALLBACKS
if (!m_buffer)
drawHelper = qDrawHelperCallback + format;
else
#endif
drawHelper = qDrawHelper + format;
}
int QCustomRasterPaintDevice::metric(PaintDeviceMetric m) const
{
switch (m) {
case PdmWidth:
return widget->frameGeometry().width();
case PdmHeight:
return widget->frameGeometry().height();
default:
break;
}
return qt_paint_device_metric(widget, m);
}
int QCustomRasterPaintDevice::bytesPerLine() const
{
return (width() * depth() + 7) / 8;
}
#elif defined(Q_OS_SYMBIAN)
void QRasterBuffer::prepareBuffer(int /* width */, int /* height */)
{
}
#endif // Q_OS_SYMBIAN
/*!
\class QCustomRasterPaintDevice
\preliminary
\ingroup qws
\since 4.2
\brief The QCustomRasterPaintDevice class is provided to activate
hardware accelerated paint engines in Qt for Embedded Linux.
Note that this class is only available in \l{Qt for Embedded Linux}.
In \l{Qt for Embedded Linux}, painting is a pure software
implementation. But starting with Qt 4.2, it is
possible to add an accelerated graphics driver to take advantage
of available hardware resources.
Hardware acceleration is accomplished by creating a custom screen
driver, accelerating the copying from memory to the screen, and
implementing a custom paint engine accelerating the various
painting operations. Then a custom paint device (derived from the
QCustomRasterPaintDevice class) and a custom window surface
(derived from QWSWindowSurface) must be implemented to make
\l{Qt for Embedded Linux} aware of the accelerated driver.
See the \l {Adding an Accelerated Graphics Driver to Qt for Embedded Linux}
documentation for details.
\sa QRasterPaintEngine, QPaintDevice
*/
/*!
\fn QCustomRasterPaintDevice::QCustomRasterPaintDevice(QWidget *widget)
Constructs a custom raster based paint device for the given
top-level \a widget.
*/
/*!
\fn int QCustomRasterPaintDevice::bytesPerLine() const
Returns the number of bytes per line in the framebuffer. Note that
this number might be larger than the framebuffer width.
*/
/*!
\fn int QCustomRasterPaintDevice::devType() const
\internal
*/
/*!
\fn QImage::Format QCustomRasterPaintDevice::format() const
Returns the format of the device's memory buffet.
The default format is QImage::Format_ARGB32_Premultiplied. The
only other valid format is QImage::Format_RGB16.
*/
/*!
\fn void * QCustomRasterPaintDevice::memory () const
Returns a pointer to the paint device's memory buffer, or 0 if no
such buffer exists.
*/
/*!
\fn int QCustomRasterPaintDevice::metric ( PaintDeviceMetric m ) const
\reimp
*/
/*!
\fn QSize QCustomRasterPaintDevice::size () const
\internal
*/
QClipData::QClipData(int height)
{
clipSpanHeight = height;
m_clipLines = 0;
allocated = 0;
m_spans = 0;
xmin = xmax = ymin = ymax = 0;
count = 0;
enabled = true;
hasRectClip = hasRegionClip = false;
}
QClipData::~QClipData()
{
if (m_clipLines)
free(m_clipLines);
if (m_spans)
free(m_spans);
}
void QClipData::initialize()
{
if (m_spans)
return;
if (!m_clipLines)
m_clipLines = (ClipLine *)calloc(sizeof(ClipLine), clipSpanHeight);
Q_CHECK_PTR(m_clipLines);
QT_TRY {
m_spans = (QSpan *)malloc(clipSpanHeight*sizeof(QSpan));
allocated = clipSpanHeight;
Q_CHECK_PTR(m_spans);
QT_TRY {
if (hasRectClip) {
int y = 0;
while (y < ymin) {
m_clipLines[y].spans = 0;
m_clipLines[y].count = 0;
++y;
}
const int len = clipRect.width();
count = 0;
while (y < ymax) {
QSpan *span = m_spans + count;
span->x = xmin;
span->len = len;
span->y = y;
span->coverage = 255;
++count;
m_clipLines[y].spans = span;
m_clipLines[y].count = 1;
++y;
}
while (y < clipSpanHeight) {
m_clipLines[y].spans = 0;
m_clipLines[y].count = 0;
++y;
}
} else if (hasRegionClip) {
const QVector<QRect> rects = clipRegion.rects();
const int numRects = rects.size();
{ // resize
const int maxSpans = (ymax - ymin) * numRects;
if (maxSpans > allocated) {
m_spans = q_check_ptr((QSpan *)realloc(m_spans, maxSpans * sizeof(QSpan)));
allocated = maxSpans;
}
}
int y = 0;
int firstInBand = 0;
count = 0;
while (firstInBand < numRects) {
const int currMinY = rects.at(firstInBand).y();
const int currMaxY = currMinY + rects.at(firstInBand).height();
while (y < currMinY) {
m_clipLines[y].spans = 0;
m_clipLines[y].count = 0;
++y;
}
int lastInBand = firstInBand;
while (lastInBand + 1 < numRects && rects.at(lastInBand+1).top() == y)
++lastInBand;
while (y < currMaxY) {
m_clipLines[y].spans = m_spans + count;
m_clipLines[y].count = lastInBand - firstInBand + 1;
for (int r = firstInBand; r <= lastInBand; ++r) {
const QRect &currRect = rects.at(r);
QSpan *span = m_spans + count;
span->x = currRect.x();
span->len = currRect.width();
span->y = y;
span->coverage = 255;
++count;
}
++y;
}
firstInBand = lastInBand + 1;
}
Q_ASSERT(count <= allocated);
while (y < clipSpanHeight) {
m_clipLines[y].spans = 0;
m_clipLines[y].count = 0;
++y;
}
}
} QT_CATCH(...) {
free(m_spans); // have to free m_spans again or someone might think that we were successfully initialized.
m_spans = 0;
QT_RETHROW;
}
} QT_CATCH(...) {
free(m_clipLines); // same for clipLines
m_clipLines = 0;
QT_RETHROW;
}
}
void QClipData::fixup()
{
Q_ASSERT(m_spans);
if (count == 0) {
ymin = ymax = xmin = xmax = 0;
return;
}
// qDebug("QClipData::fixup: count=%d",count);
int y = -1;
ymin = m_spans[0].y;
ymax = m_spans[count-1].y + 1;
xmin = INT_MAX;
xmax = 0;
bool isRect = true;
int left = m_spans[0].x;
int right = m_spans[0].x + m_spans[0].len;
for (int i = 0; i < count; ++i) {
if (m_spans[i].y != y) {
if (m_spans[i].y != y + 1 && y != -1) {
isRect = false;
}
y = m_spans[i].y;
m_clipLines[y].spans = m_spans+i;
m_clipLines[y].count = 0;
// qDebug() << " new line: y=" << y;
}
++m_clipLines[y].count;
int sl = (int) m_spans[i].x;
int sr = sl + m_spans[i].len;
xmin = qMin(xmin, (int)m_spans[i].x);
xmax = qMax(xmax, (int)m_spans[i].x + m_spans[i].len);
if (sl != left || sr != right)
isRect = false;
}
// qDebug("xmin=%d,xmax=%d,ymin=%d,ymax=%d %s", xmin, xmax, ymin, ymax, isRect ? "rectangular" : "");
if (isRect) {
hasRectClip = true;
clipRect.setRect(xmin, ymin, xmax - xmin, ymax - ymin);
}
}
/*
Convert \a rect to clip spans.
*/
void QClipData::setClipRect(const QRect &rect)
{
if (hasRectClip && rect == clipRect)
return;
// qDebug() << "setClipRect" << clipSpanHeight << count << allocated << rect;
hasRectClip = true;
hasRegionClip = false;
clipRect = rect;
xmin = rect.x();
xmax = rect.x() + rect.width();
ymin = qMin(rect.y(), clipSpanHeight);
ymax = qMin(rect.y() + rect.height(), clipSpanHeight);
if (m_spans) {
free(m_spans);
m_spans = 0;
}
// qDebug() << xmin << xmax << ymin << ymax;
}
/*
Convert \a region to clip spans.
*/
void QClipData::setClipRegion(const QRegion ®ion)
{
if (region.rectCount() == 1) {
setClipRect(region.rects().at(0));
return;
}
hasRegionClip = true;
hasRectClip = false;
clipRegion = region;
{ // set bounding rect
const QRect rect = region.boundingRect();
xmin = rect.x();
xmax = rect.x() + rect.width();
ymin = rect.y();
ymax = rect.y() + rect.height();
}
if (m_spans) {
free(m_spans);
m_spans = 0;
}
}
/*!
\internal
spans must be sorted on y
*/
static const QSpan *qt_intersect_spans(const QClipData *clip, int *currentClip,
const QSpan *spans, const QSpan *end,
QSpan **outSpans, int available)
{
const_cast<QClipData *>(clip)->initialize();
QSpan *out = *outSpans;
const QSpan *clipSpans = clip->m_spans + *currentClip;
const QSpan *clipEnd = clip->m_spans + clip->count;
while (available && spans < end ) {
if (clipSpans >= clipEnd) {
spans = end;
break;
}
if (clipSpans->y > spans->y) {
++spans;
continue;
}
if (spans->y != clipSpans->y) {
if (spans->y < clip->count && clip->m_clipLines[spans->y].spans)
clipSpans = clip->m_clipLines[spans->y].spans;
else
++clipSpans;
continue;
}
Q_ASSERT(spans->y == clipSpans->y);
int sx1 = spans->x;
int sx2 = sx1 + spans->len;
int cx1 = clipSpans->x;
int cx2 = cx1 + clipSpans->len;
if (cx1 < sx1 && cx2 < sx1) {
++clipSpans;
continue;
} else if (sx1 < cx1 && sx2 < cx1) {
++spans;
continue;
}
int x = qMax(sx1, cx1);
int len = qMin(sx2, cx2) - x;
if (len) {
out->x = qMax(sx1, cx1);
out->len = qMin(sx2, cx2) - out->x;
out->y = spans->y;
out->coverage = qt_div_255(spans->coverage * clipSpans->coverage);
++out;
--available;
}
if (sx2 < cx2) {
++spans;
} else {
++clipSpans;
}
}
*outSpans = out;
*currentClip = clipSpans - clip->m_spans;
return spans;
}
static void qt_span_fill_clipped(int spanCount, const QSpan *spans, void *userData)
{
// qDebug() << "qt_span_fill_clipped" << spanCount;
QSpanData *fillData = reinterpret_cast<QSpanData *>(userData);
Q_ASSERT(fillData->blend && fillData->unclipped_blend);
const int NSPANS = 256;
QSpan cspans[NSPANS];
int currentClip = 0;
const QSpan *end = spans + spanCount;
while (spans < end) {
QSpan *clipped = cspans;
spans = qt_intersect_spans(fillData->clip, ¤tClip, spans, end, &clipped, NSPANS);
// qDebug() << "processed " << processed << "clipped" << clipped-cspans
// << "span:" << cspans->x << cspans->y << cspans->len << spans->coverage;
if (clipped - cspans)
fillData->unclipped_blend(clipped - cspans, cspans, fillData);
}
}
/*
\internal
Clip spans to \a{clip}-rectangle.
Returns number of unclipped spans
*/
static int qt_intersect_spans(QT_FT_Span *spans, int numSpans,
const QRect &clip)
{
const short minx = clip.left();
const short miny = clip.top();
const short maxx = clip.right();
const short maxy = clip.bottom();
int n = 0;
for (int i = 0; i < numSpans; ++i) {
if (spans[i].y > maxy)
break;
if (spans[i].y < miny
|| spans[i].x > maxx
|| spans[i].x + spans[i].len <= minx) {
continue;
}
if (spans[i].x < minx) {
spans[n].len = qMin(spans[i].len - (minx - spans[i].x), maxx - minx + 1);
spans[n].x = minx;
} else {
spans[n].x = spans[i].x;
spans[n].len = qMin(spans[i].len, ushort(maxx - spans[n].x + 1));
}
if (spans[n].len == 0)
continue;
spans[n].y = spans[i].y;
spans[n].coverage = spans[i].coverage;
++n;
}
return n;
}
static void qt_span_fill_clipRect(int count, const QSpan *spans,
void *userData)
{
QSpanData *fillData = reinterpret_cast<QSpanData *>(userData);
Q_ASSERT(fillData->blend && fillData->unclipped_blend);
Q_ASSERT(fillData->clip);
Q_ASSERT(!fillData->clip->clipRect.isEmpty());
// hw: check if this const_cast<> is safe!!!
count = qt_intersect_spans(const_cast<QSpan*>(spans), count,
fillData->clip->clipRect);
if (count > 0)
fillData->unclipped_blend(count, spans, fillData);
}
static void qt_span_clip(int count, const QSpan *spans, void *userData)
{
ClipData *clipData = reinterpret_cast<ClipData *>(userData);
// qDebug() << " qt_span_clip: " << count << clipData->operation;
// for (int i = 0; i < qMin(count, 10); ++i) {
// qDebug() << " " << spans[i].x << spans[i].y << spans[i].len << spans[i].coverage;
// }
switch (clipData->operation) {
case Qt::IntersectClip:
{
QClipData *newClip = clipData->newClip;
newClip->initialize();
int currentClip = 0;
const QSpan *end = spans + count;
while (spans < end) {
QSpan *newspans = newClip->m_spans + newClip->count;
spans = qt_intersect_spans(clipData->oldClip, ¤tClip, spans, end,
&newspans, newClip->allocated - newClip->count);
newClip->count = newspans - newClip->m_spans;
if (spans < end) {
newClip->m_spans = q_check_ptr((QSpan *)realloc(newClip->m_spans, newClip->allocated*2*sizeof(QSpan)));
newClip->allocated *= 2;
}
}
}
break;
case Qt::UniteClip:
case Qt::ReplaceClip:
clipData->newClip->appendSpans(spans, count);
break;
case Qt::NoClip:
break;
}
}
#ifndef QT_NO_DEBUG
QImage QRasterBuffer::bufferImage() const
{
QImage image(m_width, m_height, QImage::Format_ARGB32_Premultiplied);
for (int y = 0; y < m_height; ++y) {
uint *span = (uint *)const_cast<QRasterBuffer *>(this)->scanLine(y);
for (int x=0; x<m_width; ++x) {
uint argb = span[x];
image.setPixel(x, y, argb);
}
}
return image;
}
#endif
void QRasterBuffer::flushToARGBImage(QImage *target) const
{
int w = qMin(m_width, target->width());
int h = qMin(m_height, target->height());
for (int y=0; y<h; ++y) {
uint *sourceLine = (uint *)const_cast<QRasterBuffer *>(this)->scanLine(y);
QRgb *dest = (QRgb *) target->scanLine(y);
for (int x=0; x<w; ++x) {
QRgb pixel = sourceLine[x];
int alpha = qAlpha(pixel);
if (!alpha) {
dest[x] = 0;
} else {
dest[x] = (alpha << 24)
| ((255*qRed(pixel)/alpha) << 16)
| ((255*qGreen(pixel)/alpha) << 8)
| ((255*qBlue(pixel)/alpha) << 0);
}
}
}
}
class QGradientCache
{
struct CacheInfo
{
inline CacheInfo(QGradientStops s, int op, QGradient::InterpolationMode mode) :
stops(s), opacity(op), interpolationMode(mode) {}
uint buffer[GRADIENT_STOPTABLE_SIZE];
QGradientStops stops;
int opacity;
QGradient::InterpolationMode interpolationMode;
};
typedef QMultiHash<quint64, CacheInfo> QGradientColorTableHash;
public:
inline const uint *getBuffer(const QGradient &gradient, int opacity) {
quint64 hash_val = 0;
QGradientStops stops = gradient.stops();
for (int i = 0; i < stops.size() && i <= 2; i++)
hash_val += stops[i].second.rgba();
QGradientColorTableHash::const_iterator it = cache.constFind(hash_val);
if (it == cache.constEnd())
return addCacheElement(hash_val, gradient, opacity);
else {
do {
const CacheInfo &cache_info = it.value();
if (cache_info.stops == stops && cache_info.opacity == opacity && cache_info.interpolationMode == gradient.interpolationMode())
return cache_info.buffer;
++it;
} while (it != cache.constEnd() && it.key() == hash_val);
// an exact match for these stops and opacity was not found, create new cache
return addCacheElement(hash_val, gradient, opacity);
}
}
inline int paletteSize() const { return GRADIENT_STOPTABLE_SIZE; }
protected:
inline int maxCacheSize() const { return 60; }
inline void generateGradientColorTable(const QGradient& g,
uint *colorTable,
int size, int opacity) const;
uint *addCacheElement(quint64 hash_val, const QGradient &gradient, int opacity) {
if (cache.size() == maxCacheSize()) {
int elem_to_remove = qrand() % maxCacheSize();
cache.remove(cache.keys()[elem_to_remove]); // may remove more than 1, but OK
}
CacheInfo cache_entry(gradient.stops(), opacity, gradient.interpolationMode());
generateGradientColorTable(gradient, cache_entry.buffer, paletteSize(), opacity);
return cache.insert(hash_val, cache_entry).value().buffer;
}
QGradientColorTableHash cache;
};
void QGradientCache::generateGradientColorTable(const QGradient& gradient, uint *colorTable, int size, int opacity) const
{
QGradientStops stops = gradient.stops();
int stopCount = stops.count();
Q_ASSERT(stopCount > 0);
bool colorInterpolation = (gradient.interpolationMode() == QGradient::ColorInterpolation);
uint current_color = ARGB_COMBINE_ALPHA(stops[0].second.rgba(), opacity);
if (stopCount == 1) {
current_color = PREMUL(current_color);
for (int i = 0; i < size; ++i)
colorTable[i] = current_color;
return;
}
// The position where the gradient begins and ends
qreal begin_pos = stops[0].first;
qreal end_pos = stops[stopCount-1].first;
int pos = 0; // The position in the color table.
uint next_color;
qreal incr = 1 / qreal(size); // the double increment.
qreal dpos = 1.5 * incr; // current position in gradient stop list (0 to 1)
// Up to first point
colorTable[pos++] = PREMUL(current_color);
while (dpos <= begin_pos) {
colorTable[pos] = colorTable[pos - 1];
++pos;
dpos += incr;
}
int current_stop = 0; // We always interpolate between current and current + 1.
qreal t; // position between current left and right stops
qreal t_delta; // the t increment per entry in the color table
if (dpos < end_pos) {
// Gradient area
while (dpos > stops[current_stop+1].first)
++current_stop;
if (current_stop != 0)
current_color = ARGB_COMBINE_ALPHA(stops[current_stop].second.rgba(), opacity);
next_color = ARGB_COMBINE_ALPHA(stops[current_stop+1].second.rgba(), opacity);
if (colorInterpolation) {
current_color = PREMUL(current_color);
next_color = PREMUL(next_color);
}
qreal diff = stops[current_stop+1].first - stops[current_stop].first;
qreal c = (diff == 0) ? qreal(0) : 256 / diff;
t = (dpos - stops[current_stop].first) * c;
t_delta = incr * c;
while (true) {
Q_ASSERT(current_stop < stopCount);
int dist = qRound(t);
int idist = 256 - dist;
if (colorInterpolation)
colorTable[pos] = INTERPOLATE_PIXEL_256(current_color, idist, next_color, dist);
else
colorTable[pos] = PREMUL(INTERPOLATE_PIXEL_256(current_color, idist, next_color, dist));
++pos;
dpos += incr;
if (dpos >= end_pos)
break;
t += t_delta;
int skip = 0;
while (dpos > stops[current_stop+skip+1].first)
++skip;
if (skip != 0) {
current_stop += skip;
if (skip == 1)
current_color = next_color;
else
current_color = ARGB_COMBINE_ALPHA(stops[current_stop].second.rgba(), opacity);
next_color = ARGB_COMBINE_ALPHA(stops[current_stop+1].second.rgba(), opacity);
if (colorInterpolation) {
if (skip != 1)
current_color = PREMUL(current_color);
next_color = PREMUL(next_color);
}
qreal diff = stops[current_stop+1].first - stops[current_stop].first;
qreal c = (diff == 0) ? qreal(0) : 256 / diff;
t = (dpos - stops[current_stop].first) * c;
t_delta = incr * c;
}
}
}
// After last point
current_color = PREMUL(ARGB_COMBINE_ALPHA(stops[stopCount - 1].second.rgba(), opacity));
while (pos < size - 1) {
colorTable[pos] = current_color;
++pos;
}
// Make sure the last color stop is represented at the end of the table
colorTable[size - 1] = current_color;
}
Q_GLOBAL_STATIC(QGradientCache, qt_gradient_cache)
void QSpanData::init(QRasterBuffer *rb, const QRasterPaintEngine *pe)
{
rasterBuffer = rb;
#ifdef Q_WS_QWS
rasterEngine = const_cast<QRasterPaintEngine *>(pe);
#endif
type = None;
txop = 0;
bilinear = false;
m11 = m22 = m33 = 1.;
m12 = m13 = m21 = m23 = dx = dy = 0.0;
clip = pe ? pe->d_func()->clip() : 0;
}
extern QImage qt_imageForBrush(int brushStyle, bool invert);
void QSpanData::setup(const QBrush &brush, int alpha, QPainter::CompositionMode compositionMode)
{
Qt::BrushStyle brushStyle = qbrush_style(brush);
switch (brushStyle) {
case Qt::SolidPattern: {
type = Solid;
QColor c = qbrush_color(brush);
solid.color = PREMUL(ARGB_COMBINE_ALPHA(c.rgba(), alpha));
if ((solid.color & 0xff000000) == 0
&& compositionMode == QPainter::CompositionMode_SourceOver) {
type = None;
}
break;
}
case Qt::LinearGradientPattern:
{
type = LinearGradient;
const QLinearGradient *g = static_cast<const QLinearGradient *>(brush.gradient());
gradient.alphaColor = !brush.isOpaque() || alpha != 256;
gradient.colorTable = const_cast<uint*>(qt_gradient_cache()->getBuffer(*g, alpha));
gradient.spread = g->spread();
QLinearGradientData &linearData = gradient.linear;
linearData.origin.x = g->start().x();
linearData.origin.y = g->start().y();
linearData.end.x = g->finalStop().x();
linearData.end.y = g->finalStop().y();
break;
}
case Qt::RadialGradientPattern:
{
type = RadialGradient;
const QRadialGradient *g = static_cast<const QRadialGradient *>(brush.gradient());
gradient.alphaColor = !brush.isOpaque() || alpha != 256;
gradient.colorTable = const_cast<uint*>(qt_gradient_cache()->getBuffer(*g, alpha));
gradient.spread = g->spread();
QRadialGradientData &radialData = gradient.radial;
QPointF center = g->center();
radialData.center.x = center.x();
radialData.center.y = center.y();
QPointF focal = g->focalPoint();
radialData.focal.x = focal.x();
radialData.focal.y = focal.y();
radialData.radius = g->radius();
}
break;
case Qt::ConicalGradientPattern:
{
type = ConicalGradient;
const QConicalGradient *g = static_cast<const QConicalGradient *>(brush.gradient());
gradient.alphaColor = !brush.isOpaque() || alpha != 256;
gradient.colorTable = const_cast<uint*>(qt_gradient_cache()->getBuffer(*g, alpha));
gradient.spread = QGradient::RepeatSpread;
QConicalGradientData &conicalData = gradient.conical;
QPointF center = g->center();
conicalData.center.x = center.x();
conicalData.center.y = center.y();
conicalData.angle = g->angle() * 2 * Q_PI / 360.0;
}
break;
case Qt::Dense1Pattern:
case Qt::Dense2Pattern:
case Qt::Dense3Pattern:
case Qt::Dense4Pattern:
case Qt::Dense5Pattern:
case Qt::Dense6Pattern:
case Qt::Dense7Pattern:
case Qt::HorPattern:
case Qt::VerPattern:
case Qt::CrossPattern:
case Qt::BDiagPattern:
case Qt::FDiagPattern:
case Qt::DiagCrossPattern:
type = Texture;
if (!tempImage)
tempImage = new QImage();
*tempImage = rasterBuffer->colorizeBitmap(qt_imageForBrush(brushStyle, true), brush.color());
initTexture(tempImage, alpha, QTextureData::Tiled);
break;
case Qt::TexturePattern:
type = Texture;
if (!tempImage)
tempImage = new QImage();
if (qHasPixmapTexture(brush) && brush.texture().isQBitmap())
*tempImage = rasterBuffer->colorizeBitmap(brush.textureImage(), brush.color());
else
*tempImage = brush.textureImage();
initTexture(tempImage, alpha, QTextureData::Tiled, tempImage->rect());
break;
case Qt::NoBrush:
default:
type = None;
break;
}
adjustSpanMethods();
}
void QSpanData::adjustSpanMethods()
{
bitmapBlit = 0;
alphamapBlit = 0;
alphaRGBBlit = 0;
fillRect = 0;
switch(type) {
case None:
unclipped_blend = 0;
break;
case Solid:
unclipped_blend = rasterBuffer->drawHelper->blendColor;
bitmapBlit = rasterBuffer->drawHelper->bitmapBlit;
alphamapBlit = rasterBuffer->drawHelper->alphamapBlit;
alphaRGBBlit = rasterBuffer->drawHelper->alphaRGBBlit;
fillRect = rasterBuffer->drawHelper->fillRect;
break;
case LinearGradient:
case RadialGradient:
case ConicalGradient:
unclipped_blend = rasterBuffer->drawHelper->blendGradient;
break;
case Texture:
#ifdef Q_WS_QWS
#ifndef QT_NO_RASTERCALLBACKS
if (!rasterBuffer->buffer())
unclipped_blend = qBlendTextureCallback;
else
#endif
unclipped_blend = qBlendTexture;
#else
unclipped_blend = qBlendTexture;
#endif
if (!texture.imageData)
unclipped_blend = 0;
break;
}
// setup clipping
if (!unclipped_blend) {
blend = 0;
} else if (!clip) {
blend = unclipped_blend;
} else if (clip->hasRectClip) {
blend = clip->clipRect.isEmpty() ? 0 : qt_span_fill_clipRect;
} else {
blend = qt_span_fill_clipped;
}
}
void QSpanData::setupMatrix(const QTransform &matrix, int bilin)
{
QTransform delta;
// make sure we round off correctly in qdrawhelper.cpp
delta.translate(1.0 / 65536, 1.0 / 65536);
QTransform inv = (delta * matrix).inverted();
m11 = inv.m11();
m12 = inv.m12();
m13 = inv.m13();
m21 = inv.m21();
m22 = inv.m22();
m23 = inv.m23();
m33 = inv.m33();
dx = inv.dx();
dy = inv.dy();
txop = inv.type();
bilinear = bilin;
const bool affine = !m13 && !m23;
fast_matrix = affine
&& m11 * m11 + m21 * m21 < 1e4
&& m12 * m12 + m22 * m22 < 1e4
&& qAbs(dx) < 1e4
&& qAbs(dy) < 1e4;
adjustSpanMethods();
}
extern const QVector<QRgb> *qt_image_colortable(const QImage &image);
void QSpanData::initTexture(const QImage *image, int alpha, QTextureData::Type _type, const QRect &sourceRect)
{
const QImageData *d = const_cast<QImage *>(image)->data_ptr();
if (!d || d->height == 0) {
texture.imageData = 0;
texture.width = 0;
texture.height = 0;
texture.x1 = 0;
texture.y1 = 0;
texture.x2 = 0;
texture.y2 = 0;
texture.bytesPerLine = 0;
texture.format = QImage::Format_Invalid;
texture.colorTable = 0;
texture.hasAlpha = alpha != 256;
} else {
texture.imageData = d->data;
texture.width = d->width;
texture.height = d->height;
if (sourceRect.isNull()) {
texture.x1 = 0;
texture.y1 = 0;
texture.x2 = texture.width;
texture.y2 = texture.height;
} else {
texture.x1 = sourceRect.x();
texture.y1 = sourceRect.y();
texture.x2 = qMin(texture.x1 + sourceRect.width(), d->width);
texture.y2 = qMin(texture.y1 + sourceRect.height(), d->height);
}
texture.bytesPerLine = d->bytes_per_line;
texture.format = d->format;
texture.colorTable = (d->format <= QImage::Format_Indexed8 && !d->colortable.isEmpty()) ? &d->colortable : 0;
texture.hasAlpha = image->hasAlphaChannel() || alpha != 256;
}
texture.const_alpha = alpha;
texture.type = _type;
adjustSpanMethods();
}
#ifdef Q_WS_WIN
#endif
/*!
\internal
Draws a line using the floating point midpoint algorithm. The line
\a line is already in device coords at this point.
*/
static void drawLine_midpoint_i(int x1, int y1, int x2, int y2, ProcessSpans span_func, QSpanData *data,
LineDrawMode style, const QIntRect &devRect)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - drawLine_midpoint_i" << QLine(QPoint(x1, y1), QPoint(x2, y2));
#endif
int x, y;
int dx, dy, d, incrE, incrNE;
dx = x2 - x1;
dy = y2 - y1;
const int NSPANS = 256;
QT_FT_Span spans[NSPANS];
int current = 0;
bool ordered = true;
if (dy == 0) {
// specialcase horizontal lines
if (y1 >= devRect.y1 && y1 < devRect.y2) {
int start = qMax(devRect.x1, qMin(x1, x2));
int stop = qMax(x1, x2) + 1;
int stop_clipped = qMin(devRect.x2, stop);
int len = stop_clipped - start;
if (style == LineDrawNormal && stop == stop_clipped)
len--;
if (len > 0) {
spans[0].x = ushort(start);
spans[0].len = ushort(len);
spans[0].y = y1;
spans[0].coverage = 255;
span_func(1, spans, data);
}
}
return;
} else if (dx == 0) {
// specialcase vertical lines
if (x1 >= devRect.x1 && x1 < devRect.x2) {
int start = qMax(devRect.y1, qMin(y1, y2));
int stop = qMax(y1, y2) + 1;
int stop_clipped = qMin(devRect.y2, stop);
int len = stop_clipped - start;
if (style == LineDrawNormal && stop == stop_clipped)
len--;
// hw: create spans directly instead to possibly avoid clipping
if (len > 0)
fillRect_normalized(QRect(x1, start, 1, len).normalized(), data, 0);
}
return;
}
if (qAbs(dx) >= qAbs(dy)) { /* if x is the major axis: */
if (x2 < x1) { /* if coordinates are out of order */
qt_swap_int(x1, x2);
dx = -dx;
qt_swap_int(y1, y2);
dy = -dy;
}
int x_lower_limit = - 128;
if (x1 < x_lower_limit) {
int cy = dy * (x_lower_limit - x1) / dx + y1;
drawLine_midpoint_i(x_lower_limit, cy, x2, y2, span_func, data, style, devRect);
return;
}
if (style == LineDrawNormal)
--x2;
// In the loops below we increment before call the span function so
// we need to stop one pixel before
x2 = qMin(x2, devRect.x2 - 1);
// completely clipped, so abort
if (x2 <= x1) {
return;
}
int x = x1;
int y = y1;
if (y2 <= y1)
ordered = false;
{
const int index = (ordered ? current : NSPANS - 1 - current);
spans[index].coverage = 255;
spans[index].x = x;
spans[index].y = y;
if (x >= devRect.x1 && y >= devRect.y1 && y < devRect.y2)
spans[index].len = 1;
else
spans[index].len = 0;
}
if (y2 > y1) { // 315 -> 360 and 135 -> 180 (unit circle degrees)
y2 = qMin(y2, devRect.y2 - 1);
incrE = dy * 2;
d = incrE - dx;
incrNE = (dy - dx) * 2;
if (y > y2)
goto flush_and_return;
while (x < x2) {
++x;
if (d > 0) {
if (spans[current].len > 0)
++current;
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
++y;
d += incrNE;
if (y > y2)
goto flush_and_return;
spans[current].len = 0;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
} else {
d += incrE;
if (x == devRect.x1)
spans[current].x = devRect.x1;
}
if (x < devRect.x1 || y < devRect.y1)
continue;
Q_ASSERT(x<devRect.x2);
Q_ASSERT(y<devRect.y2);
Q_ASSERT(spans[current].y == y);
spans[current].len++;
}
if (spans[current].len > 0) {
++current;
}
} else { // 0-45 and 180->225 (unit circle degrees)
y1 = qMin(y1, devRect.y2 - 1);
incrE = dy * 2;
d = incrE + dx;
incrNE = (dy + dx) * 2;
if (y < devRect.y1)
goto flush_and_return;
while (x < x2) {
++x;
if (d < 0) {
if (spans[NSPANS - 1 - current].len > 0)
++current;
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
--y;
d += incrNE;
if (y < devRect.y1)
goto flush_and_return;
const int index = NSPANS - 1 - current;
spans[index].len = 0;
spans[index].coverage = 255;
spans[index].x = x;
spans[index].y = y;
} else {
d += incrE;
if (x == devRect.x1)
spans[NSPANS - 1 - current].x = devRect.x1;
}
if (x < devRect.x1 || y > y1)
continue;
Q_ASSERT(x<devRect.x2 && y<devRect.y2);
Q_ASSERT(spans[NSPANS - 1 - current].y == y);
spans[NSPANS - 1 - current].len++;
}
if (spans[NSPANS - 1 - current].len > 0) {
++current;
}
}
} else {
// if y is the major axis:
if (y2 < y1) { /* if coordinates are out of order */
qt_swap_int(y1, y2);
dy = -dy;
qt_swap_int(x1, x2);
dx = -dx;
}
int y_lower_limit = - 128;
if (y1 < y_lower_limit) {
int cx = dx * (y_lower_limit - y1) / dy + x1;
drawLine_midpoint_i(cx, y_lower_limit, x2, y2, span_func, data, style, devRect);
return;
}
if (style == LineDrawNormal)
--y2;
// In the loops below we increment before call the span function so
// we need to stop one pixel before
y2 = qMin(y2, devRect.y2 - 1);
// completely clipped, so abort
if (y2 <= y1) {
return;
}
x = x1;
y = y1;
if (x>=devRect.x1 && y>=devRect.y1 && x < devRect.x2) {
Q_ASSERT(x >= devRect.x1 && y >= devRect.y1 && x < devRect.x2 && y < devRect.y2);
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (x2 > x1) { // 90 -> 135 and 270 -> 315 (unit circle degrees)
x2 = qMin(x2, devRect.x2 - 1);
incrE = dx * 2;
d = incrE - dy;
incrNE = (dx - dy) * 2;
if (x > x2)
goto flush_and_return;
while (y < y2) {
if (d > 0) {
++x;
d += incrNE;
if (x > x2)
goto flush_and_return;
} else {
d += incrE;
}
++y;
if (x < devRect.x1 || y < devRect.y1)
continue;
Q_ASSERT(x<devRect.x2 && y<devRect.y2);
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
} else { // 45 -> 90 and 225 -> 270 (unit circle degrees)
x1 = qMin(x1, devRect.x2 - 1);
incrE = dx * 2;
d = incrE + dy;
incrNE = (dx + dy) * 2;
if (x < devRect.x1)
goto flush_and_return;
while (y < y2) {
if (d < 0) {
--x;
d += incrNE;
if (x < devRect.x1)
goto flush_and_return;
} else {
d += incrE;
}
++y;
if (y < devRect.y1 || x > x1)
continue;
Q_ASSERT(x>=devRect.x1 && x<devRect.x2 && y>=devRect.y1 && y<devRect.y2);
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
}
}
flush_and_return:
if (current > 0)
span_func(current, ordered ? spans : spans + (NSPANS - current), data);
}
static void offset_pattern(int offset, bool *inDash, int *dashIndex, int *currentOffset, const QVarLengthArray<qreal> &pattern)
{
while (offset--) {
if (--*currentOffset == 0) {
*inDash = !*inDash;
*dashIndex = ((*dashIndex + 1) % pattern.size());
*currentOffset = int(pattern[*dashIndex]);
}
}
}
static void drawLine_midpoint_dashed_i(int x1, int y1, int x2, int y2,
QPen *pen,
ProcessSpans span_func, QSpanData *data,
LineDrawMode style, const QIntRect &devRect,
int *patternOffset)
{
#ifdef QT_DEBUG_DRAW
qDebug() << " - drawLine_midpoint_dashed_i" << x1 << y1 << x2 << y2 << *patternOffset;
#endif
int x, y;
int dx, dy, d, incrE, incrNE;
dx = x2 - x1;
dy = y2 - y1;
Q_ASSERT(*patternOffset >= 0);
const QVector<qreal> penPattern = pen->dashPattern();
QVarLengthArray<qreal> pattern(penPattern.size());
int patternLength = 0;
for (int i = 0; i < penPattern.size(); ++i)
patternLength += qMax<qreal>(1.0, (penPattern.at(i)));
// pattern must be reversed if coordinates are out of order
int reverseLength = -1;
if (dy == 0 && x1 > x2)
reverseLength = x1 - x2;
else if (dx == 0 && y1 > y2)
reverseLength = y1 - y2;
else if (qAbs(dx) >= qAbs(dy) && x2 < x1) // x major axis
reverseLength = qAbs(dx);
else if (qAbs(dy) >= qAbs(dx) && y2 < y1) // y major axis
reverseLength = qAbs(dy);
const bool reversed = (reverseLength > -1);
if (reversed) { // reverse pattern
for (int i = 0; i < penPattern.size(); ++i)
pattern[penPattern.size() - 1 - i] = qMax<qreal>(1.0, penPattern.at(i));
*patternOffset = (patternLength - 1 - *patternOffset);
*patternOffset += patternLength - (reverseLength % patternLength);
*patternOffset = *patternOffset % patternLength;
} else {
for (int i = 0; i < penPattern.size(); ++i)
pattern[i] = qMax<qreal>(1.0, penPattern.at(i));
}
int dashIndex = 0;
bool inDash = !reversed;
int currPattern = int(pattern[dashIndex]);
// adjust pattern for offset
offset_pattern(*patternOffset, &inDash, &dashIndex, &currPattern, pattern);
const int NSPANS = 256;
QT_FT_Span spans[NSPANS];
int current = 0;
bool ordered = true;
if (dy == 0) {
// specialcase horizontal lines
if (y1 >= devRect.y1 && y1 < devRect.y2) {
int start_unclipped = qMin(x1, x2);
int start = qMax(devRect.x1, start_unclipped);
int stop = qMax(x1, x2) + 1;
int stop_clipped = qMin(devRect.x2, stop);
int len = stop_clipped - start;
if (style == LineDrawNormal && stop == stop_clipped)
len--;
// adjust pattern for starting offset
offset_pattern(start - start_unclipped, &inDash, &dashIndex, &currPattern, pattern);
if (len > 0) {
int x = start;
while (x < stop_clipped) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
const int dash = qMin(currPattern, stop_clipped - x);
if (inDash) {
spans[current].x = ushort(x);
spans[current].len = ushort(dash);
spans[current].y = y1;
spans[current].coverage = 255;
++current;
}
if (dash < currPattern) {
currPattern -= dash;
} else {
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
inDash = !inDash;
}
x += dash;
}
}
}
goto flush_and_return;
} else if (dx == 0) {
if (x1 >= devRect.x1 && x1 < devRect.x2) {
int start_unclipped = qMin(y1, y2);
int start = qMax(devRect.y1, start_unclipped);
int stop = qMax(y1, y2) + 1;
int stop_clipped = qMin(devRect.y2, stop);
if (style == LineDrawNormal && stop == stop_clipped)
--stop;
else
stop = stop_clipped;
// adjust pattern for starting offset
offset_pattern(start - start_unclipped, &inDash, &dashIndex, &currPattern, pattern);
// loop over dashes
int y = start;
while (y < stop) {
const int dash = qMin(currPattern, stop - y);
if (inDash) {
for (int i = 0; i < dash; ++i) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].x = x1;
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].y = ushort(y + i);
++current;
}
}
if (dash < currPattern) {
currPattern -= dash;
} else {
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
inDash = !inDash;
}
y += dash;
}
}
goto flush_and_return;
}
if (qAbs(dx) >= qAbs(dy)) { /* if x is the major axis: */
if (x2 < x1) { /* if coordinates are out of order */
qt_swap_int(x1, x2);
dx = -dx;
qt_swap_int(y1, y2);
dy = -dy;
}
if (style == LineDrawNormal)
--x2;
// In the loops below we increment before call the span function so
// we need to stop one pixel before
x2 = qMin(x2, devRect.x2 - 1);
// completely clipped, so abort
if (x2 <= x1)
goto flush_and_return;
int x = x1;
int y = y1;
if (x >= devRect.x1 && y >= devRect.y1 && y < devRect.y2) {
Q_ASSERT(x < devRect.x2);
if (inDash) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (--currPattern <= 0) {
inDash = !inDash;
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
}
}
if (y2 > y1) { // 315 -> 360 and 135 -> 180 (unit circle degrees)
y2 = qMin(y2, devRect.y2 - 1);
incrE = dy * 2;
d = incrE - dx;
incrNE = (dy - dx) * 2;
if (y > y2)
goto flush_and_return;
while (x < x2) {
if (d > 0) {
++y;
d += incrNE;
if (y > y2)
goto flush_and_return;
} else {
d += incrE;
}
++x;
const bool skip = x < devRect.x1 || y < devRect.y1;
Q_ASSERT(skip || (x < devRect.x2 && y < devRect.y2));
if (inDash && !skip) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (--currPattern <= 0) {
inDash = !inDash;
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
}
}
} else { // 0-45 and 180->225 (unit circle degrees)
y1 = qMin(y1, devRect.y2 - 1);
incrE = dy * 2;
d = incrE + dx;
incrNE = (dy + dx) * 2;
if (y < devRect.y1)
goto flush_and_return;
while (x < x2) {
if (d < 0) {
if (current > 0) {
span_func(current, spans, data);
current = 0;
}
--y;
d += incrNE;
if (y < devRect.y1)
goto flush_and_return;
} else {
d += incrE;
}
++x;
const bool skip = x < devRect.x1 || y > y1;
Q_ASSERT(skip || (x < devRect.x2 && y < devRect.y2));
if (inDash && !skip) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (--currPattern <= 0) {
inDash = !inDash;
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
}
}
}
} else {
// if y is the major axis:
if (y2 < y1) { /* if coordinates are out of order */
qt_swap_int(y1, y2);
dy = -dy;
qt_swap_int(x1, x2);
dx = -dx;
}
if (style == LineDrawNormal)
--y2;
// In the loops below we increment before call the span function so
// we need to stop one pixel before
y2 = qMin(y2, devRect.y2 - 1);
// completely clipped, so abort
if (y2 <= y1)
goto flush_and_return;
x = x1;
y = y1;
if (x>=devRect.x1 && y>=devRect.y1 && x < devRect.x2) {
Q_ASSERT(x < devRect.x2);
if (inDash) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (--currPattern <= 0) {
inDash = !inDash;
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
}
}
if (x2 > x1) { // 90 -> 135 and 270 -> 315 (unit circle degrees)
x2 = qMin(x2, devRect.x2 - 1);
incrE = dx * 2;
d = incrE - dy;
incrNE = (dx - dy) * 2;
if (x > x2)
goto flush_and_return;
while (y < y2) {
if (d > 0) {
++x;
d += incrNE;
if (x > x2)
goto flush_and_return;
} else {
d += incrE;
}
++y;
const bool skip = x < devRect.x1 || y < devRect.y1;
Q_ASSERT(skip || (x < devRect.x2 && y < devRect.y2));
if (inDash && !skip) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (--currPattern <= 0) {
inDash = !inDash;
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
}
}
} else { // 45 -> 90 and 225 -> 270 (unit circle degrees)
x1 = qMin(x1, devRect.x2 - 1);
incrE = dx * 2;
d = incrE + dy;
incrNE = (dx + dy) * 2;
if (x < devRect.x1)
goto flush_and_return;
while (y < y2) {
if (d < 0) {
--x;
d += incrNE;
if (x < devRect.x1)
goto flush_and_return;
} else {
d += incrE;
}
++y;
const bool skip = y < devRect.y1 || x > x1;
Q_ASSERT(skip || (x >= devRect.x1 && x < devRect.x2 && y < devRect.y2));
if (inDash && !skip) {
if (current == NSPANS) {
span_func(NSPANS, spans, data);
current = 0;
}
spans[current].len = 1;
spans[current].coverage = 255;
spans[current].x = x;
spans[current].y = y;
++current;
}
if (--currPattern <= 0) {
inDash = !inDash;
dashIndex = (dashIndex + 1) % pattern.size();
currPattern = int(pattern[dashIndex]);
}
}
}
}
flush_and_return:
if (current > 0)
span_func(current, ordered ? spans : spans + (NSPANS - current), data);
// adjust offset
if (reversed) {
*patternOffset = (patternLength - 1 - *patternOffset);
} else {
*patternOffset = 0;
for (int i = 0; i <= dashIndex; ++i)
*patternOffset += int(pattern[i]);
*patternOffset += patternLength - currPattern - 1;
*patternOffset = (*patternOffset % patternLength);
}
}
/*!
\internal
\a x and \a y is relative to the midpoint of \a rect.
*/
static inline void drawEllipsePoints(int x, int y, int length,
const QRect &rect,
const QRect &clip,
ProcessSpans pen_func, ProcessSpans brush_func,
QSpanData *pen_data, QSpanData *brush_data)
{
if (length == 0)
return;
QT_FT_Span outline[4];
const int midx = rect.x() + (rect.width() + 1) / 2;
const int midy = rect.y() + (rect.height() + 1) / 2;
x = x + midx;
y = midy - y;
// topleft
outline[0].x = midx + (midx - x) - (length - 1) - (rect.width() & 0x1);
outline[0].len = qMin(length, x - outline[0].x);
outline[0].y = y;
outline[0].coverage = 255;
// topright
outline[1].x = x;
outline[1].len = length;
outline[1].y = y;
outline[1].coverage = 255;
// bottomleft
outline[2].x = outline[0].x;
outline[2].len = outline[0].len;
outline[2].y = midy + (midy - y) - (rect.height() & 0x1);
outline[2].coverage = 255;
// bottomright
outline[3].x = x;
outline[3].len = length;
outline[3].y = outline[2].y;
outline[3].coverage = 255;
if (brush_func && outline[0].x + outline[0].len < outline[1].x) {
QT_FT_Span fill[2];
// top fill
fill[0].x = outline[0].x + outline[0].len - 1;
fill[0].len = qMax(0, outline[1].x - fill[0].x);
fill[0].y = outline[1].y;
fill[0].coverage = 255;
// bottom fill
fill[1].x = outline[2].x + outline[2].len - 1;
fill[1].len = qMax(0, outline[3].x - fill[1].x);
fill[1].y = outline[3].y;
fill[1].coverage = 255;
int n = (fill[0].y >= fill[1].y ? 1 : 2);
n = qt_intersect_spans(fill, n, clip);
if (n > 0)
brush_func(n, fill, brush_data);
}
if (pen_func) {
int n = (outline[1].y >= outline[2].y ? 2 : 4);
n = qt_intersect_spans(outline, n, clip);
if (n > 0)
pen_func(n, outline, pen_data);
}
}
/*!
\internal
Draws an ellipse using the integer point midpoint algorithm.
*/
static void drawEllipse_midpoint_i(const QRect &rect, const QRect &clip,
ProcessSpans pen_func, ProcessSpans brush_func,
QSpanData *pen_data, QSpanData *brush_data)
{
const qreal a = qreal(rect.width()) / 2;
const qreal b = qreal(rect.height()) / 2;
qreal d = b*b - (a*a*b) + 0.25*a*a;
int x = 0;
int y = (rect.height() + 1) / 2;
int startx = x;
// region 1
while (a*a*(2*y - 1) > 2*b*b*(x + 1)) {
if (d < 0) { // select E
d += b*b*(2*x + 3);
++x;
} else { // select SE
d += b*b*(2*x + 3) + a*a*(-2*y + 2);
drawEllipsePoints(startx, y, x - startx + 1, rect, clip,
pen_func, brush_func, pen_data, brush_data);
startx = ++x;
--y;
}
}
drawEllipsePoints(startx, y, x - startx + 1, rect, clip,
pen_func, brush_func, pen_data, brush_data);
// region 2
d = b*b*(x + 0.5)*(x + 0.5) + a*a*((y - 1)*(y - 1) - b*b);
const int miny = rect.height() & 0x1;
while (y > miny) {
if (d < 0) { // select SE
d += b*b*(2*x + 2) + a*a*(-2*y + 3);
++x;
} else { // select S
d += a*a*(-2*y + 3);
}
--y;
drawEllipsePoints(x, y, 1, rect, clip,
pen_func, brush_func, pen_data, brush_data);
}
}
/*!
\fn void QRasterPaintEngine::drawPoints(const QPoint *points, int pointCount)
\overload
Draws the first \a pointCount points in the buffer \a points
The default implementation converts the first \a pointCount QPoints in \a points
to QPointFs and calls the floating point version of drawPoints.
*/
/*!
\fn void QRasterPaintEngine::drawEllipse(const QRect &rect)
\overload
Reimplement this function to draw the largest ellipse that can be
contained within rectangle \a rect.
*/
#ifdef QT_DEBUG_DRAW
void dumpClip(int width, int height, const QClipData *clip)
{
QImage clipImg(width, height, QImage::Format_ARGB32_Premultiplied);
clipImg.fill(0xffff0000);
int x0 = width;
int x1 = 0;
int y0 = height;
int y1 = 0;
((QClipData *) clip)->spans(); // Force allocation of the spans structure...
for (int i = 0; i < clip->count; ++i) {
const QSpan *span = ((QClipData *) clip)->spans() + i;
for (int j = 0; j < span->len; ++j)
clipImg.setPixel(span->x + j, span->y, 0xffffff00);
x0 = qMin(x0, int(span->x));
x1 = qMax(x1, int(span->x + span->len - 1));
y0 = qMin(y0, int(span->y));
y1 = qMax(y1, int(span->y));
}
static int counter = 0;
Q_ASSERT(y0 >= 0);
Q_ASSERT(x0 >= 0);
Q_ASSERT(y1 >= 0);
Q_ASSERT(x1 >= 0);
fprintf(stderr,"clip %d: %d %d - %d %d\n", counter, x0, y0, x1, y1);
clipImg.save(QString::fromLatin1("clip-%0.png").arg(counter++));
}
#endif
QT_END_NAMESPACE