/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the test suite of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights. These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/
#include <QtTest/QtTest>
#include <q3datetimeedit.h>
#include <qapplication.h>
#include <qcombobox.h>
#include <qdialog.h>
#include <qlineedit.h>
#include <q3listbox.h>
#include <q3table.h>
#include <qlayout.h>
#include "../../shared/util.h"
#define WAITS 1
#ifdef WAITS
#endif
Q_DECLARE_METATYPE(QPoint)
//TESTED_FILES=
QT_FORWARD_DECLARE_CLASS(Q3Table)
class tst_Q3Table : public QObject
{
Q_OBJECT
public:
tst_Q3Table();
public slots:
void initTestCase();
void cleanupTestCase();
void init();
void cleanup();
private slots:
void setNumRowsColsItems();
void setNumRowsColsWidgets();
void selection();
void selectComboTableItem_data();
void selectComboTableItem();
void pageUpDownNavigation_data();
void pageUpDownNavigation();
void simpleKeyboardNavigation();
void setRowStretchable();
void setColumnStretchable();
void selectRow_data();
void selectRow();
void selectColumn_data();
void selectColumn();
void removeSelection_selectionChanged();
void cellNavigation();
void cellNavigationWhileEditing();
void removeRow_data();
void removeRow();
void swapRowMemoryLeak();
void insertRows_data();
void insertRows();
void editCheck();
void setCellWidgetFocus();
void selectionWithMouse_data();
void selectionWithMouse();
void valueChanged();
void numSelections(); // Task specific, moreNumSelections() should cover all bases
void dateTimeEdit();
void onValueChanged(int, int);
void moreNumSelections_data();
void moreNumSelections();
void headerSwapIconset();
void propagateEscapeKey();
public slots:
void selectionWasChanged();
private:
void setupTableItems();
Q3Table *testWidget;
bool isValueChanged, receivedSelectionChanged;
};
Q_DECLARE_METATYPE(Q3Table::SelectionMode);
#if 0
/* XPM */
static const char *fileopen[] = {
" 16 13 5 1",
". c #040404",
"# c #808304",
"a c None",
"b c #f3f704",
"c c #f3f7f3",
"aaaaaaaaa...aaaa",
"aaaaaaaa.aaa.a.a",
"aaaaaaaaaaaaa..a",
"a...aaaaaaaa...a",
".bcb.......aaaaa",
".cbcbcbcbc.aaaaa",
".bcbcbcbcb.aaaaa",
".cbcb...........",
".bcb.#########.a",
".cb.#########.aa",
".b.#########.aaa",
"..#########.aaaa",
"...........aaaaa"
};
#endif
tst_Q3Table::tst_Q3Table()
: isValueChanged( false )
{
}
void tst_Q3Table::initTestCase()
{
}
void tst_Q3Table::cleanupTestCase()
{
}
void tst_Q3Table::init()
{
// Reset the table
testWidget = new Q3Table(4,4,0,"testWidget");
testWidget->show();
#ifdef Q_WS_X11
qt_x11_wait_for_window_manager( testWidget );
#endif
}
void tst_Q3Table::cleanup()
{
testWidget->hide();
delete testWidget;
testWidget = 0;
}
/*
Function that will popuplate the testWidget with a variety of Q3TableItems
*/
void tst_Q3Table::setupTableItems()
{
QStringList list;
list << "A" << "B";
Q3ComboTableItem *cbi = new Q3ComboTableItem(testWidget, list);
testWidget->setItem(1, 1, cbi);
Q3ComboTableItem *ecbi = new Q3ComboTableItem(testWidget, list, TRUE);
testWidget->setItem(1, 2, ecbi);
Q3CheckTableItem *chi = new Q3CheckTableItem(testWidget, "Check");
testWidget->setItem(2, 2, chi);
Q3TableItem *ne = new Q3TableItem(testWidget, Q3TableItem::Never, "Never");
testWidget->setItem(0, 0, ne);
Q3TableItem *ot = new Q3TableItem(testWidget, Q3TableItem::OnTyping, "On Typing");
testWidget->setItem(0, 1, ot);
Q3TableItem *wc = new Q3TableItem(testWidget, Q3TableItem::WhenCurrent, "When Current");
testWidget->setItem(0, 2, wc);
Q3TableItem *al = new Q3TableItem(testWidget, Q3TableItem::Always, "Always");
testWidget->setItem(0, 3, al);
}
#define CELL_TEXT(r, c) QString::number( r ) + "/" + QString::number( c )
void tst_Q3Table::setNumRowsColsItems()
{
Q3Table *t = new Q3Table( 0, "test_table" );
const int initial_num_rows = 4;
const int initial_num_cols = 4;
const int larger_num_rows = 8;
const int larger_num_cols = 8;
const int smaller_num_rows = 3;
const int smaller_num_cols = 3;
t->setNumRows( initial_num_cols );
t->setNumCols( initial_num_cols );
QCOMPARE( t->numRows(), initial_num_rows );
QCOMPARE( t->numCols(), initial_num_cols );
int r, c;
for ( r = 0; r < initial_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
t->setText( r, c, CELL_TEXT( r, c ) );
}
}
for ( r = 0; r < initial_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) );
}
}
t->setNumRows( larger_num_rows );
for ( r = 0; r < larger_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
if ( r < initial_num_rows && c < initial_num_cols ) {
QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) );
} else {
QCOMPARE( t->text( r, c ), QString() );
}
}
}
t->setNumCols( larger_num_cols );
for ( r = 0; r < larger_num_rows; ++r ) {
for ( c = 0; c < larger_num_cols; ++c ) {
if ( r < initial_num_rows && c < initial_num_cols ) {
QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) );
} else {
QCOMPARE( t->text( r, c ), QString() );
}
}
}
t->setNumRows( smaller_num_rows );
for ( r = 0; r < smaller_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) );
}
}
t->setNumCols( smaller_num_cols );
for ( r = 0; r < smaller_num_rows; ++r ) {
for ( c = 0; c < smaller_num_cols; ++c ) {
QCOMPARE( t->text( r, c ), CELL_TEXT( r, c ) );
}
}
delete t;
}
void tst_Q3Table::setNumRowsColsWidgets()
{
Q3Table *t = new Q3Table( 0, "test_table" );
const int initial_num_rows = 4;
const int initial_num_cols = 4;
const int larger_num_rows = 8;
const int larger_num_cols = 8;
const int smaller_num_rows = 3;
const int smaller_num_cols = 3;
t->setNumRows( initial_num_cols );
t->setNumCols( initial_num_cols );
QCOMPARE( t->numRows(), initial_num_rows );
QCOMPARE( t->numCols(), initial_num_cols );
int r, c;
for ( r = 0; r < initial_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
t->setCellWidget( r, c, new QWidget( t, CELL_TEXT( r, c ) ) );
}
}
for ( r = 0; r < initial_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) );
}
}
t->setNumRows( larger_num_rows );
for ( r = 0; r < larger_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
if ( r < initial_num_rows && c < initial_num_cols ) {
QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) );
} else {
QCOMPARE( t->cellWidget( r, c ), (QWidget*)0 );
}
}
}
t->setNumCols( larger_num_cols );
for ( r = 0; r < larger_num_rows; ++r ) {
for ( c = 0; c < larger_num_cols; ++c ) {
if ( r < initial_num_rows && c < initial_num_cols ) {
QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) );
} else {
QCOMPARE( t->cellWidget( r, c ), (QWidget*)0 );
}
}
}
t->setNumRows( smaller_num_rows );
for ( r = 0; r < smaller_num_rows; ++r ) {
for ( c = 0; c < initial_num_cols; ++c ) {
QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) );
}
}
t->setNumCols( smaller_num_cols );
for ( r = 0; r < smaller_num_rows; ++r ) {
for ( c = 0; c < smaller_num_cols; ++c ) {
QCOMPARE( QString( t->cellWidget( r, c )->name() ), CELL_TEXT( r, c ) );
}
}
delete t;
}
void tst_Q3Table::selection()
{
Q3Table *t = new Q3Table( 20, 20, 0, "test_table" );
t->selectCells( 0, 0, 50, 50 );
Q3TableSelection sel( 60, 60, 100, 100 );
t->addSelection( sel );
t->show();
QCOMPARE( t->numSelections(), 2 );
delete t;
}
void tst_Q3Table::selectComboTableItem_data()
{
QTest::addColumn<bool>("editable");
QTest::newRow( "editable" ) << TRUE;
QTest::newRow( "non-editable" ) << FALSE;
}
class MyTable : public Q3Table
{
// Conveience subclass used to be able to call isEditing()
public:
MyTable(int rows,int cols,QWidget *parent = 0,const char *name = 0)
: Q3Table(rows,cols,parent,name) {}
bool isEditing() {
return Q3Table::isEditing();
}
};
void tst_Q3Table::selectComboTableItem()
{
#if 0
MyTable table(4,4,0,"subclassTestWidget");
// Test for task #25026
QFETCH( bool, editable );
QStringList strings;
strings << "One" << "Two" << "Three" << "Four";
QComboTableItem *cbi = new QComboTableItem(testWidget,strings,editable);
table.setItem(0,0,cbi);
table.hide();
table.show();
QComboBox *cb;
if ( !editable )
cb = (QComboBox*)table.viewport()->child("qt_editor_cb","QComboBox");
else
cb = (QComboBox*)table.cellWidget(0,0);
QVERIFY( cb );
QCOMPARE(table.text(0,0),QString("One"));
QTest::mouseClick(cb,QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(cb->width()-7,cb->height()-5));
QVERIFY(cb->listBox()->isVisible());
QTest::mouseClick(cb->listBox()->viewport(),QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(5,cb->listBox()->height()-5));
QCOMPARE(table.text(0,0),QString("Four"));
// Ensure the edit is accepted
QTest::mouseClick(table.viewport(),QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(table.width()-10,table.height()-10));
QVERIFY(!table.isEditing());
QCOMPARE(table.text(0,0),QString("Four"));
// Now check that Escape will revert any changes
QTest::mouseClick(cb,QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(cb->width()-7,cb->height()-5));
QVERIFY(cb->listBox()->isVisible());
QTest::mouseClick(cb->listBox()->viewport(),QtTestCase::LeftButton,QtTestCase::NoButton,QPoint(5,5));
QCOMPARE(cb->currentText(),QString("One"));
QTest::keyClick(cb,Qt::Key_Escape);
QVERIFY(!table.isEditing());
QCOMPARE(table.text(0,0),QString("Four"));
#else
QSKIP("This test will fail at the moment since the way qtestlib iss handling mouse events is broken",SkipAll);
#endif
}
void tst_Q3Table::pageUpDownNavigation_data()
{
QTest::addColumn<Q3Table::SelectionMode>("selectionMode");
QTest::addColumn<bool>("activeSelection");
QTest::addColumn<int>("pgUpTopRow");
QTest::addColumn<int>("pgUpBottomRow");
QTest::addColumn<int>("pgUpLeftCol");
QTest::addColumn<int>("pgUpRightCol");
QTest::addColumn<int>("pgDownTopRow");
QTest::addColumn<int>("pgDownBottomRow");
QTest::addColumn<int>("pgDownLeftCol");
QTest::addColumn<int>("pgDownRightCol");
QTest::newRow("NoSelection") << Q3Table::NoSelection << FALSE << -1 << -1 << -1 << -1 << -1 << -1 << -1 << -1;
QTest::newRow("SingleSelection") << Q3Table::Single << FALSE << -1 << -1 << -1 << -1 << -1 << -1 << -1 << -1;
QTest::newRow("MultiSelection") << Q3Table::Multi << FALSE << -1 << -1 << -1 << -1 << -1 << -1 << -1 << -1;
QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << TRUE << 0 << 0 << 0 << 3 << 3 << 3 << 0 << 3;
QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << TRUE << 0 << 0 << 0 << 3 << 3 << 3 << 0 << 3;
}
void tst_Q3Table::pageUpDownNavigation()
{
setupTableItems();
// Test for task #25842
QFETCH(Q3Table::SelectionMode,selectionMode);
QFETCH(bool,activeSelection);
QFETCH(int,pgUpTopRow);
QFETCH(int,pgUpBottomRow);
QFETCH(int,pgUpLeftCol);
QFETCH(int,pgUpRightCol);
QFETCH(int,pgDownTopRow);
QFETCH(int,pgDownBottomRow);
QFETCH(int,pgDownLeftCol);
QFETCH(int,pgDownRightCol);
// Needed to force the table to have "no selection"
testWidget->setCurrentCell(-1,-1);
testWidget->setSelectionMode(selectionMode);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(testWidget->viewport(),Qt::Key_PageUp);
#ifdef WAITS
QTest::qWait(50);
#endif
Q3TableSelection ts = testWidget->selection(testWidget->currentSelection());
QVERIFY(ts.isActive() == activeSelection);
if (activeSelection) {
QVERIFY(ts.topRow() == pgUpTopRow);
QVERIFY(ts.bottomRow() == pgUpBottomRow);
QVERIFY(ts.leftCol() == pgUpLeftCol);
QVERIFY(ts.rightCol() == pgUpRightCol);
}
QTest::keyClick(testWidget->viewport(),Qt::Key_PageDown);
#ifdef WAITS
QTest::qWait(50);
#endif
ts = testWidget->selection(testWidget->currentSelection());
QVERIFY(ts.isActive() == activeSelection);
if (activeSelection) {
QVERIFY(ts.topRow() == pgDownTopRow);
QVERIFY(ts.bottomRow() == pgDownBottomRow);
QVERIFY(ts.leftCol() == pgDownLeftCol);
QVERIFY(ts.rightCol() == pgDownRightCol);
}
}
void tst_Q3Table::simpleKeyboardNavigation()
{
QApplication::setActiveWindow(testWidget);
QTRY_COMPARE(QApplication::activeWindow(), testWidget);
QWidget *w;
// Test for task #24726
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::mouseClick(testWidget->viewport(),
Qt::LeftButton, Qt::NoModifier,
QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(0) + 3));
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->currentColumn(), 0);
QCOMPARE(testWidget->currentRow(), 0);
QTest::keyClick(testWidget->viewport(), Qt::Key_T);
// After the first keyevent, the table starts editing the item
w = testWidget->cellWidget(0, 0);
QVERIFY(w);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_E);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_C);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_H);
#ifdef WAITS
QTest::qWait(50);
#endif
#ifdef Q_WS_MAC // Mac lineedits grab Up and Down
QTest::keyClick(w, Qt::Key_Return);
#else
QTest::keyClick(testWidget->viewport(), Qt::Key_Down);
#endif
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->text(0,0), QString("tech"));
QCOMPARE(testWidget->currentColumn(), 0);
QCOMPARE(testWidget->currentRow(), 1);
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
w = testWidget->cellWidget(0, 1);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_B);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_C);
#ifdef WAITS
QTest::qWait(50);
#endif
#ifdef Q_WS_MAC // Mac lineedits grab Up and Down
QTest::keyClick(w, Qt::Key_Return);
QTest::keyClick(testWidget->viewport(), Qt::Key_Up);
QTest::keyClick(testWidget->viewport(), Qt::Key_Up);
#else
QTest::keyClick(w, Qt::Key_Up);
#endif
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->text(1,0), QString("abc"));
QCOMPARE(testWidget->currentColumn(), 0);
QCOMPARE(testWidget->currentRow(), 0);
w = testWidget->cellWidget(0, 0);
QTest::keyClick(w, Qt::Key_D);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_E);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(w, Qt::Key_F);
#ifdef WAITS
QTest::qWait(50);
#endif
#ifdef Q_WS_MAC // Mac lineedits grab Up and Down
QTest::keyClick(w, Qt::Key_Return);
#else
QTest::keyClick(w, Qt::Key_Down);
#endif
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->text(0,0), QString("def"));
QCOMPARE(testWidget->currentColumn(), 0);
QCOMPARE(testWidget->currentRow(), 1);
}
void tst_Q3Table::setRowStretchable()
{
#if 1
QSKIP("This test currently fails on all versions", SkipAll);
#endif
// Part of test for task 24471
// Only tests TRUE case, need FALSE case written
// Also needs to test the case where the user tries to resize it
testWidget->setRowStretchable(0,TRUE);
testWidget->show();
int height = testWidget->rowHeight(0);
testWidget->setRowHeight(0,height * 2);
QCOMPARE(height,testWidget->rowHeight(0));
}
void tst_Q3Table::setColumnStretchable()
{
#if 1
QSKIP("This test currently fails on all versions", SkipAll);
#endif
// Part of test for task 24471
// Only tests TRUE case, need FALSE case written
// Also needs to test the case where the user tries to resize it
testWidget->setColumnStretchable(0,TRUE);
testWidget->show();
int width = testWidget->columnWidth(0);
testWidget->setColumnWidth(0,width * 2);
QCOMPARE(width,testWidget->columnWidth(0));
}
void tst_Q3Table::selectRow_data()
{
QTest::addColumn<Q3Table::SelectionMode>("selectionMode");
QTest::addColumn<bool>("activeSelection");
QTest::addColumn<int>("topRow");
QTest::addColumn<int>("bottomRow");
QTest::addColumn<int>("leftCol");
QTest::addColumn<int>("rightCol");
QTest::newRow("NoSelection") << Q3Table::NoSelection << TRUE << 1 << 1 << 0 << 3;
QTest::newRow("SingleSelection") << Q3Table::Single << TRUE << 1 << 1 << 0 << 3;
QTest::newRow("MultiSelection") << Q3Table::Multi << TRUE << 1 << 1 << 0 << 3;
QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << TRUE << 1 << 1 << 0 << 3;
QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << TRUE << 1 << 1 << 0 << 3;
}
void tst_Q3Table::selectRow()
{
QFETCH(Q3Table::SelectionMode,selectionMode);
QFETCH(bool,activeSelection);
QFETCH(int,topRow);
QFETCH(int,bottomRow);
QFETCH(int,leftCol);
QFETCH(int,rightCol);
testWidget->clearSelection();
testWidget->setSelectionMode(selectionMode);
testWidget->selectRow(1);
int current = testWidget->currentSelection();
QVERIFY(current != -1);
Q3TableSelection ts = testWidget->selection(current);
QCOMPARE(ts.isActive(), activeSelection);
if (activeSelection) {
QCOMPARE(ts.topRow(), topRow);
QCOMPARE(ts.bottomRow(), bottomRow);
QCOMPARE(ts.leftCol(), leftCol);
QCOMPARE(ts.rightCol(), rightCol);
}
// make sure selection is cleared
testWidget->clearSelection();
current = testWidget->currentSelection();
QVERIFY(current == -1);
testWidget->selectRow(1);
QEXPECT_FAIL("SingleRowSelection", "This currently fails in all versions", Abort);
QVERIFY(testWidget->numSelections() > 0); // selectRow in SingleRowSelection doesn't select anything (see qtable.cpp)
current = testWidget->currentSelection();
QVERIFY(current != -1);
ts = testWidget->selection(current);
QCOMPARE(ts.isActive(), activeSelection);
if (activeSelection) {
QCOMPARE(ts.topRow(), topRow);
QCOMPARE(ts.bottomRow(), bottomRow);
QCOMPARE(ts.leftCol(), leftCol);
QCOMPARE(ts.rightCol(), rightCol);
}
}
void tst_Q3Table::selectColumn_data()
{
QTest::addColumn<Q3Table::SelectionMode>("selectionMode");
QTest::addColumn<bool>("activeSelection");
QTest::addColumn<int>("topRow");
QTest::addColumn<int>("bottomRow");
QTest::addColumn<int>("leftCol");
QTest::addColumn<int>("rightCol");
QTest::newRow("NoSelection") << Q3Table::NoSelection << TRUE << 0 << 3 << 1 << 1;
QTest::newRow("SingleSelection") << Q3Table::Single << TRUE << 0 << 3 << 1 << 1;
QTest::newRow("MultiSelection") << Q3Table::Multi << TRUE << 0 << 3 << 1 << 1;
QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << TRUE << 0 << 3 << 1 << 1;
QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << TRUE << 0 << 3 << 1 << 1;
}
void tst_Q3Table::selectColumn()
{
QFETCH(Q3Table::SelectionMode,selectionMode);
QFETCH(bool,activeSelection);
QFETCH(int,topRow);
QFETCH(int,bottomRow);
QFETCH(int,leftCol);
QFETCH(int,rightCol);
testWidget->setSelectionMode(selectionMode);
testWidget->selectColumn(1);
Q3TableSelection ts = testWidget->selection(testWidget->currentSelection());
QCOMPARE(ts.isActive(), activeSelection);
if (activeSelection) {
QCOMPARE(ts.topRow(), topRow);
QCOMPARE(ts.bottomRow(), bottomRow);
QCOMPARE(ts.leftCol(), leftCol);
QCOMPARE(ts.rightCol(), rightCol);
}
testWidget->clearSelection();
ts = testWidget->selection(testWidget->currentSelection());
QVERIFY(!ts.isActive());
testWidget->selectColumn(1);
ts = testWidget->selection(testWidget->currentSelection());
QCOMPARE(ts.isActive(), activeSelection);
if (activeSelection) {
QCOMPARE(ts.topRow(), topRow);
QCOMPARE(ts.bottomRow(), bottomRow);
QCOMPARE(ts.leftCol(), leftCol);
QCOMPARE(ts.rightCol(), rightCol);
}
}
void tst_Q3Table::cellNavigation()
{
#if 0
setupTableItems();
#endif
testWidget->setCurrentCell(0, 0);
// Check tab key first
QCOMPARE(testWidget->currentRow(), 0);
QCOMPARE(testWidget->currentColumn(), 0);
QTest::keyClick(testWidget->viewport(), Qt::Key_Tab);
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->currentRow(), 0);
QCOMPARE(testWidget->currentColumn(), 1);
QTest::keyClick(testWidget->viewport(), Qt::Key_Tab);
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->currentRow(), 0);
QCOMPARE(testWidget->currentColumn(), 2);
QTest::keyClick(testWidget->viewport(), Qt::Key_Tab);
#ifdef WAITS
QTest::qWait(50);
#endif
// One more, and it should stay where it is
QTest::keyClick(testWidget->viewport(), Qt::Key_Tab);
QCOMPARE(testWidget->currentRow(), 0);
QCOMPARE(testWidget->currentColumn(), 3);
testWidget->setCurrentCell(3,3);
// Now check backtab key
QCOMPARE(testWidget->currentRow(), 3);
QCOMPARE(testWidget->currentColumn(), 3);
QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab);
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->currentRow(), 3);
QCOMPARE(testWidget->currentColumn(), 2);
QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab);
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->currentRow(), 3);
QCOMPARE(testWidget->currentColumn(), 1);
QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab);
#ifdef WAITS
QTest::qWait(50);
#endif
// One more, and it should stay where it is
QTest::keyClick(testWidget->viewport(), Qt::Key_BackTab);
QCOMPARE(testWidget->currentRow(), 3);
QCOMPARE(testWidget->currentColumn(), 0);
#ifdef WAITS
QTest::qWait(50);
#endif
testWidget->setCurrentCell(0, 0);
// Now check enter key
for (int row = 0; row < 3; ++row) {
QCOMPARE(testWidget->currentRow(), row);
QCOMPARE(testWidget->currentColumn(), 0);
QTest::keyClick(testWidget->viewport(), Qt::Key_Enter);
#ifdef WAITS
QTest::qWait(50);
#endif
}
// One more, and it should go to back
QTest::keyClick(testWidget->viewport(), Qt::Key_Enter);
QCOMPARE(testWidget->currentRow(), 0);
QCOMPARE(testWidget->currentColumn(), 1);
}
void tst_Q3Table::cellNavigationWhileEditing()
{
// This is basically the cellNavigation() test
// with the current cell being edited before
// navigation.
#if 0
setupTableItems();
int a, b;
QPoint contentPos;
// Check tab key first
for (a = 0;a < 4;a++) {
for (b = 0;b < 4;b++) {
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_Tab);
}
}
// One more should put it at the beginning again
QTest::keyClick(testWidget->viewport(),Qt::Key_Tab);
QCOMPARE(testWidget->currentRow(),0);
QCOMPARE(testWidget->currentColumn(),0);
testWidget->setCurrentCell(3,3);
// Now check backtab key
for (a = 3;a > -1;a--) {
for (b = 3;b > -1;b--) {
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_BackTab);
}
}
// One more should put it at the end again
QTest::keyClick(testWidget->viewport(),Qt::Key_BackTab);
QCOMPARE(testWidget->currentRow(),3);
QCOMPARE(testWidget->currentColumn(),3);
testWidget->setCurrentCell(0,0);
// Now check enter key
for (a = 0;a < 4;a++) {
for (b = 0;b < 4;b++) {
QCOMPARE(testWidget->currentColumn(),a);
QCOMPARE(testWidget->currentRow(),b);
contentPos = QPoint(testWidget->columnPos(a) + 3, testWidget->rowPos(b) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_Enter);
}
}
// One more should put it at the beginning again
QTest::keyClick(testWidget->viewport(),Qt::Key_Enter);
QCOMPARE(testWidget->currentRow(),0);
QCOMPARE(testWidget->currentColumn(),0);
// Reset it back to the top
contentPos = QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(0) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
// Now check down key
for (a = 0;a < 4;a++) {
for (b = 0;b < 4;b++) {
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_Down);
if (a == 3) {
// Check it hasn't moved from the bottom even
// after clicking down
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
// Put it in correct place for next check
QTest::keyClick(testWidget->viewport(),Qt::Key_Home);
QTest::keyClick(testWidget->viewport(),Qt::Key_Right);
}
}
}
// Start at the bottom now
contentPos = QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(3) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
// Now check up key
for (a = 3;a > -1;a--) {
for (b = 3;b > -1;b--) {
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_Up);
if (a == 0) {
// Check it hasn't moved from the bottom even
// after clicking down
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
// Put it in correct place for next check
QTest::keyClick(testWidget->viewport(),Qt::Key_End);
QTest::keyClick(testWidget->viewport(),Qt::Key_Right);
}
}
}
// Reset it back to the top
contentPos = QPoint(testWidget->columnPos(0) + 3, testWidget->rowPos(0) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
// Now check right key
for (a = 0;a < 4;a++) {
for (b = 0;b < 4;b++) {
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_Right);
if (b == 3) {
// Check it hasn't moved from the bottom even
// after clicking down
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
// Put it in correct place for next check
QTest::keyClick(testWidget->viewport(),Qt::Key_Home);
QTest::keyClick(testWidget->viewport(),Qt::Key_Down);
}
}
}
// Start it at the far left
contentPos = QPoint(testWidget->columnPos(3) + 3, testWidget->rowPos(0) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
// Now check up key
for (a = 3;a > -1;a--) {
for (b = 3;b > -1;b--) {
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
contentPos = QPoint(testWidget->columnPos(b) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoButton,
testWidget->contentsToViewport(contentPos));
if(a == 0 && b == 2) // On typing item
QTest::keyClick(testWidget->viewport(), Qt::Key_A);
QTest::keyClick(testWidget->viewport(),Qt::Key_Left);
if (b == 0) {
// Check it hasn't moved from the bottom even
// after clicking down
QCOMPARE(testWidget->currentRow(),a);
QCOMPARE(testWidget->currentColumn(),b);
// Put it in correct place for next check
QTest::keyClick(testWidget->viewport(),Qt::Key_End);
QTest::keyClick(testWidget->viewport(),Qt::Key_Down);
}
}
}
#else
QSKIP( "This test currently fails on all versions", SkipAll);
#endif
}
void tst_Q3Table::removeRow_data()
{
QTest::addColumn<Q3Table::SelectionMode>("selectionMode");
QTest::newRow("NoSelection") << Q3Table::NoSelection;
QTest::newRow("SingleSelection") << Q3Table::Single;
QTest::newRow("MultiSelection") << Q3Table::Multi;
QTest::newRow("SingleRowSelection") << Q3Table::SingleRow;
QTest::newRow("MultiRowSelection") << Q3Table::MultiRow;
}
void tst_Q3Table::removeRow()
{
QFETCH(Q3Table::SelectionMode, selectionMode);
#if 1
if(selectionMode == Q3Table::SingleRow
|| selectionMode == Q3Table::MultiRow)
QSKIP("removeRow() is expected to fail in SingleRow/MultiRow selection modes in all versions", SkipAll);
#endif
// This tests task 26419
setupTableItems();
testWidget->setSelectionMode(selectionMode);
for(int a = 3;a > -1;a--) {
QPoint contentPos(testWidget->columnPos(0) + 3, testWidget->rowPos(a) + 3);
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoModifier,
testWidget->contentsToViewport(contentPos));
#ifdef WAITS
QTest::qWait(50);
#endif
if (selectionMode != Q3Table::NoSelection) {
Q3TableSelection ts = testWidget->selection(testWidget->currentSelection());
QVERIFY(ts.isActive());
QVERIFY(ts.topRow() == a);
QVERIFY(ts.bottomRow() == a);
}
testWidget->removeRow(a);
// a is actually now the number of rows because the row sections are
// zero-based
QVERIFY(testWidget->numRows() == a);
QVERIFY(!testWidget->selection(testWidget->currentSelection()).isActive());
}
}
class SwapRowMemoryLeakTableItem : public Q3TableItem
{
public:
SwapRowMemoryLeakTableItem(Q3Table * table, const QString & text, bool * deletionFlag)
: Q3TableItem(table, OnTyping, text)
{
this->deletionFlag = deletionFlag;
}
~SwapRowMemoryLeakTableItem()
{
*deletionFlag = TRUE;
}
private:
bool * deletionFlag;
};
void tst_Q3Table::swapRowMemoryLeak()
{
//Although this should fail due to code in Q3Table::swapRows() it dose not becuse it is saved
//in ~Q3Table
Q3Table * quickTable = new Q3Table(2, 1);
bool i1deletionFlag = FALSE;
SwapRowMemoryLeakTableItem * i1 = new SwapRowMemoryLeakTableItem(quickTable,"item 1", &i1deletionFlag);
quickTable->setItem(0, 0, i1);
bool i2deletionFlag = FALSE;
SwapRowMemoryLeakTableItem * i2 = new SwapRowMemoryLeakTableItem(quickTable,"item 2", &i2deletionFlag);
quickTable->setItem(1, 0, i2);
quickTable->swapRows(0, 1);
// quickTable->removeRow(0);
delete quickTable;
QVERIFY(i1deletionFlag);
QVERIFY(i2deletionFlag);
}
void tst_Q3Table::insertRows_data()
{
QTest::addColumn<int>("rowToInsertAt");
QTest::addColumn<int>("numberOfRowsToInsert");
QTest::newRow("firstRowOneRow") << 1 << 1;
QTest::newRow("secondRowTenRows") << 2 << 10;
QTest::newRow("thirdRowNoRows") << 3 << 0;
QTest::newRow("zerothRowNegativeRows") << 0 << -1;
}
void tst_Q3Table::insertRows()
{
QFETCH(int, rowToInsertAt);
QFETCH(int, numberOfRowsToInsert);
int i = 0;
for (i = 0;i < 4;i++)
testWidget->setText(i, 0, QString("Item %0,0").arg(i));
testWidget->insertRows(rowToInsertAt, numberOfRowsToInsert);
if(numberOfRowsToInsert <= 0) {
QVERIFY(testWidget->numRows() == 4);
} else {
QVERIFY(testWidget->numRows() == 4 + numberOfRowsToInsert);
}
int rowNumber = 0;
for (i = 0;i < rowToInsertAt;i++) {
QCOMPARE(testWidget->text(i, 0), QString("Item %0,0").arg(rowNumber));
rowNumber++;
}
if (numberOfRowsToInsert > 0) {
for (i = rowToInsertAt;i < rowToInsertAt + numberOfRowsToInsert;i++)
QCOMPARE(testWidget->text(i, 0), QString());
for (i = rowToInsertAt + numberOfRowsToInsert;i < 4 + numberOfRowsToInsert;i++) {
QCOMPARE(testWidget->text(i, 0), QString("Item %0,0").arg(rowNumber));
rowNumber++;
}
}
}
class EditCheckQ3Table : public Q3Table
{
public:
int endEditCount;
int beginEditCount;
EditCheckQ3Table(int r, int c, QWidget *parent = 0, const char *name = 0)
: Q3Table(r, c, parent, name)
{
endEditCount = beginEditCount = 0;
}
protected:
void endEdit(int row, int col, bool accept, bool replace)
{
endEditCount++;
Q3Table::endEdit(row, col, accept, replace);
}
QWidget * beginEdit(int row, int col, bool replace)
{
beginEditCount++;
return Q3Table::beginEdit(row, col, replace);
}
};
void tst_Q3Table::editCheck()
{
// Test for task 28086
#if 1
QSKIP("This test currently fails on all versions", SkipAll);
#endif
EditCheckQ3Table table(10, 10, 0);
table.show();
QApplication::setActiveWindow(&table);
QTest::qWaitForWindowShown(&table);
QTRY_COMPARE(QApplication::activeWindow(), &table);
table.setCurrentCell(0, 0);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(table.viewport(), Qt::Key_T);
#ifdef WAITS
QTest::qWait(50);
#endif
// After the first keyevent, the table starts editing the item
QLineEdit *le = qFindChild<QLineEdit *>(testWidget->viewport(), "qt_lineeditor");
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(le, Qt::Key_Enter);
le = 0;
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(table.beginEditCount, 1);
QEXPECT_FAIL("", "this fails because endEdit is called for the old current item when we set a new one", Abort);
QCOMPARE(table.endEditCount, 1);
}
void tst_Q3Table::setCellWidgetFocus()
{
#define CELLWIDGET_CHEAT 1
// Test for task 27683
int numRows = testWidget->numRows();
int numCols = testWidget->numCols();
testWidget->setNumRows(1);
testWidget->setNumCols(1);
#if CELLWIDGET_CHEAT
qApp->processEvents();
#endif
QLineEdit *lineedit = new QLineEdit(testWidget);
testWidget->setCellWidget(0, 0, lineedit);
testWidget->show();
qApp->setActiveWindow(testWidget);
lineedit->setFocus();
QVERIFY(lineedit->hasFocus());
testWidget->setNumRows(numRows);
testWidget->setNumCols(numCols);
}
void tst_Q3Table::selectionWithMouse_data()
{
QTest::addColumn<QPoint>("clickPos");
QTest::addColumn<Q3Table::SelectionMode>("selectionMode");
QTest::addColumn<int>("numSelections");
QTest::addColumn<bool>("activeSelection");
QTest::addColumn<int>("topRow");
QTest::addColumn<int>("bottomRow");
QTest::addColumn<int>("leftCol");
QTest::addColumn<int>("rightCol");
QTest::newRow("NoSelection") << QPoint(20, 15) << Q3Table::NoSelection << 0 << FALSE << -1 << -1 << -1 << -1;
QTest::newRow("SingleSelection") << QPoint(20, 15) << Q3Table::Single << 1 << TRUE << 0 << 0 << 0 << 0;
QTest::newRow("MultiSelection") << QPoint(20, 15) << Q3Table::Multi << 1 << TRUE << 0 << 0 << 0 << 0;
QTest::newRow("SingleRowSelection") << QPoint(20, 15) << Q3Table::SingleRow << 1 << TRUE << 0 << 0 << 0 << 3;
QTest::newRow("MultiRowSelection") << QPoint(20, 15) << Q3Table::MultiRow << 1 << TRUE << 0 << 0 << 0 << 3;
}
void tst_Q3Table::selectionWithMouse()
{
QFETCH(QPoint, clickPos);
QFETCH(Q3Table::SelectionMode, selectionMode);
QFETCH(int, numSelections);
QFETCH(bool, activeSelection);
QFETCH(int, topRow);
QFETCH(int, bottomRow);
QFETCH(int, leftCol);
QFETCH(int, rightCol);
testWidget->setSelectionMode((Q3Table::SelectionMode)selectionMode);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::mouseClick(testWidget->viewport(), Qt::LeftButton, Qt::NoModifier, clickPos);
#ifdef WAITS
QTest::qWait(50);
#endif
QVERIFY(testWidget->numSelections() == numSelections);
Q3TableSelection ts = testWidget->selection(testWidget->currentSelection());
QVERIFY(ts.isActive() == activeSelection);
if (activeSelection) {
QVERIFY(ts.topRow() == topRow);
QVERIFY(ts.bottomRow() == bottomRow);
QVERIFY(ts.leftCol() == leftCol);
QVERIFY(ts.rightCol() == rightCol);
}
}
class TimeTableItem : public Q3TableItem
{
public:
TimeTableItem(Q3Table *parent=0)
: Q3TableItem(parent, Q3TableItem::OnTyping, ""),
editorWasTimeEdit(false)
{ setReplaceable(false); }
QWidget* createEditor() const
{
return new Q3TimeEdit(table()->viewport(), "time_edit");
}
void setContentFromEditor(QWidget* widget)
{
Q3TimeEdit *time_edit = ::qobject_cast<Q3TimeEdit*>(widget);
if (!time_edit) {
editorWasTimeEdit = false;
Q3TableItem::setContentFromEditor(widget);
return;
}
editorWasTimeEdit = true;
QTime res = time_edit->time();
setText(QString::number(QTime().secsTo(res)));
}
bool editorWasTimeEdit;
};
void tst_Q3Table::onValueChanged(int, int)
{
isValueChanged = true;
}
void tst_Q3Table::valueChanged()
{
// task 27496
isValueChanged = false;
TimeTableItem *ti = new TimeTableItem(testWidget);
testWidget->setItem(0, 0, ti);
connect(testWidget,SIGNAL(valueChanged(int,int)),this,SLOT(onValueChanged(int,int)));
testWidget->show();
QApplication::setActiveWindow(testWidget);
QTest::qWaitForWindowShown(testWidget);
QTRY_COMPARE(QApplication::activeWindow(), testWidget);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(testWidget->viewport(), Qt::Key_1);
#ifdef WAITS
QTest::qWait(50);
#endif
QTRY_VERIFY(qApp->focusWidget());
QTest::keyClick(qApp->focusWidget(), Qt::Key_Enter);
#ifdef WAITS
QTest::qWait(50);
#endif
QVERIFY(ti->editorWasTimeEdit);
disconnect(testWidget,SIGNAL(valueChanged(int,int)),this,SLOT(onValueChanged(int,int)));
}
void tst_Q3Table::numSelections()
{
// task 28017
int numRows = testWidget->numRows();
int numCols = testWidget->numCols();
testWidget->setNumRows(10);
testWidget->setNumCols(10);
for (int i=0;i<10;++i)
for (int j=0;j<10;++j)
testWidget->setItem(i,j,new Q3TableItem(testWidget,Q3TableItem::OnTyping,"Item"));
QCOMPARE(testWidget->numSelections(),0);
testWidget->clearSelection();
QCOMPARE(testWidget->numSelections(),0);
testWidget->selectRow(2);
QCOMPARE(testWidget->numSelections(),1);
testWidget->selectRow(4);
QCOMPARE(testWidget->numSelections(),2);
testWidget->selectRow(5);
QCOMPARE(testWidget->numSelections(),3);
testWidget->clearSelection();
QCOMPARE(testWidget->numSelections(),0);
testWidget->setNumRows(numRows);
testWidget->setNumCols(numCols);
}
void tst_Q3Table::dateTimeEdit()
{
// task 29002
TimeTableItem *ti = new TimeTableItem(testWidget);
testWidget->setItem(0, 0, ti);
testWidget->show();
QApplication::setActiveWindow(testWidget);
QTest::qWaitForWindowShown(testWidget);
QTRY_COMPARE(QApplication::activeWindow(), testWidget);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(testWidget->viewport(), Qt::Key_1);
#ifdef WAITS
QTest::qWait(50);
#endif
QTRY_VERIFY(qApp->focusWidget());
QTest::keyClick(qApp->focusWidget(), Qt::Key_Enter);
#ifdef WAITS
QTest::qWait(50);
#endif
QVERIFY(ti->editorWasTimeEdit);
}
void tst_Q3Table::moreNumSelections_data()
{
QTest::addColumn<Q3Table::SelectionMode>("selectionMode");
QTest::addColumn<int>("numSelectionsBeforeAnyRowClicked");
QTest::addColumn<int>("numSelectionsAfter1stRowClicked");
QTest::addColumn<int>("numSelectionsAfter3rdRowClicked");
QTest::addColumn<int>("numSelectionsAfter3rdRowClickedAgain");
QTest::newRow("NoSelection") << Q3Table::NoSelection << 0 << 0 << 0 << 0;
QTest::newRow("SingleSelection") << Q3Table::Single << 0 << 1 << 1 << 1;
QTest::newRow("MultiSelection") << Q3Table::Multi << 0 << 1 << 2 << 2;
// in row selection modes the current item is always selected
QTest::newRow("SingleRowSelection") << Q3Table::SingleRow << 1 << 1 << 1 << 1;
QTest::newRow("MultiRowSelection") << Q3Table::MultiRow << 1 << 1 << 2 << 2;
}
void tst_Q3Table::moreNumSelections()
{
#if 0
QFETCH(Q3Table::SelectionMode, selectionMode);
QFETCH(int, numSelectionsBeforeAnyRowClicked);
QFETCH(int, numSelectionsAfter1stRowClicked);
QFETCH(int, numSelectionsAfter3rdRowClicked);
QFETCH(int, numSelectionsAfter3rdRowClickedAgain);
if((Q3Table::SelectionMode)selectionMode == Q3Table::Multi ||
(Q3Table::SelectionMode)selectionMode == Q3Table::MultiRow) {
QSKIP("numSelections() currently fails on all versions", SkipAll);
}
testWidget->setSelectionMode((Q3Table::SelectionMode)selectionMode);
QCOMPARE(testWidget->numSelections(), numSelectionsBeforeAnyRowClicked);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::mouseClick(testWidget->verticalHeader(), QtTestCase::LeftButton, QtTestCase::NoButton,
QPoint(5, testWidget->verticalHeader()->sectionPos(0)+2));
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->numSelections(), numSelectionsAfter1stRowClicked);
QTest::mouseClick(testWidget->verticalHeader(), QtTestCase::LeftButton, QtTestCase::NoButton,
QPoint(5, testWidget->verticalHeader()->sectionPos(2)+2));
#ifdef WAITS
QTest::qWait(50);
#endif
QEXPECT_FAIL("MultiSelection", "Will not fix this for 3.x", Abort);
QEXPECT_FAIL("MultiRowSelection", "Will not fix this for 3.x", Abort);
QCOMPARE(testWidget->numSelections(), numSelectionsAfter3rdRowClicked);
QTest::mouseClick(testWidget->verticalHeader(), QtTestCase::LeftButton, QtTestCase::NoButton,
QPoint(5, testWidget->verticalHeader()->sectionPos(2)+2));
#ifdef WAITS
QTest::qWait(50);
#endif
QCOMPARE(testWidget->numSelections(), numSelectionsAfter3rdRowClickedAgain);
#else
QSKIP( "This test is expected to fail on >= 3.2", SkipAll);
#endif
}
void tst_Q3Table::headerSwapIconset()
{
#if 0
QIconSet is0, is1;
QString hl0, hl1;
if (testWidget->horizontalHeader()->iconSet(0))
is0 = *testWidget->horizontalHeader()->iconSet(0);
hl0 = testWidget->horizontalHeader()->label(0);
if (testWidget->horizontalHeader()->iconSet(1))
is1 = *testWidget->horizontalHeader()->iconSet(1);
hl1 = testWidget->horizontalHeader()->label(1);
testWidget->show();
testWidget->horizontalHeader()->setLabel(1, QPixmap(fileopen), "Test");
testWidget->swapColumns(0, 1, true);
QVERIFY(!testWidget->horizontalHeader()->iconSet(1)
|| testWidget->horizontalHeader()->iconSet(1)->isNull());
testWidget->horizontalHeader()->setLabel(0, is0, hl0);
testWidget->horizontalHeader()->setLabel(1, is1, hl1);
#else
QSKIP( "This test fails in Qt 4", SkipAll);
#endif
}
class EscapeKeyDialog : public QDialog
{
public:
EscapeKeyDialog() : QDialog(0), recievedEscape(false) {}
bool recievedEscape;
protected:
void keyPressEvent(QKeyEvent *e)
{
if (e->key() == Qt::Key_Escape)
recievedEscape = TRUE;
QDialog::keyPressEvent(e);
}
};
void tst_Q3Table::propagateEscapeKey()
{
#if 0
EscapeKeyDialog ekd;
Q3Table *table = new Q3Table(5, 5, &ekd);
ekd.show();
#ifdef Q_WS_X11
qt_x11_wait_for_window_manager(&ekd);
#endif
table->setCurrentCell(0,0);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(table->viewport(), Qt::Key_A);
#ifdef WAITS
QTest::qWait(50);
#endif
QTest::keyClick(table->viewport(), Qt::Key_Escape);
#ifdef WAITS
QTest::qWait(50);
#endif
QVERIFY(!ekd.recievedEscape);
QVERIFY(table->text(0,0).isEmpty());
QTest::keyClick(table->viewport(), Qt::Key_Escape);
#ifdef WAITS
QTest::qWait(50);
#endif
QVERIFY(ekd.recievedEscape);
#else
QSKIP("This test fails for all versions of Qt", SkipAll);
#endif
}
void tst_Q3Table::removeSelection_selectionChanged()
{
int numRows = testWidget->numRows();
int numCols = testWidget->numCols();
testWidget->setNumRows(3);
testWidget->setNumCols(3);
Q3TableSelection sel(1, 1, 2, 2);
testWidget->addSelection(sel);
QObject::connect(testWidget, SIGNAL(selectionChanged()),
this, SLOT(selectionWasChanged()));
receivedSelectionChanged = false;
testWidget->removeSelection(sel);
qApp->processEvents();
QVERIFY(receivedSelectionChanged);
testWidget->setNumRows(numRows);
testWidget->setNumCols(numCols);
QObject::disconnect(testWidget, SIGNAL(selectionChanged()),
this, SLOT(selectionWasChanged()));
}
void tst_Q3Table::selectionWasChanged()
{
receivedSelectionChanged = true;
}
QTEST_MAIN(tst_Q3Table)
#include "tst_q3table.moc"