MCL/sf/mw/qt: tests/auto/qbuffer/tst_qbuffer.cpp@4b6ee5efea19

/****************************************************************************
**
** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
** All rights reserved.
** Contact: Nokia Corporation (qt-info@nokia.com)
**
** This file is part of the test suite of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** No Commercial Usage
** This file contains pre-release code and may not be distributed.
** You may use this file in accordance with the terms and conditions
** contained in the Technology Preview License Agreement accompanying
** this package.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 2.1 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL included in the
** packaging of this file.  Please review the following information to
** ensure the GNU Lesser General Public License version 2.1 requirements
** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
**
** In addition, as a special exception, Nokia gives you certain additional
** rights.  These rights are described in the Nokia Qt LGPL Exception
** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
**
** If you have questions regarding the use of this file, please contact
** Nokia at qt-info@nokia.com.
**
**
**
**
**
**
**
**
** $QT_END_LICENSE$
**
****************************************************************************/


#include <QtTest/QtTest>


#include <QBuffer>
#include <QByteArray>

//TESTED_CLASS=
//TESTED_FILES=

class tst_QBuffer : public QObject
{
    Q_OBJECT
public:
    tst_QBuffer();

private slots:
    void getSetCheck();
    void readBlock();
    void readBlockPastEnd();
    void writeBlock_data();
    void writeBlock();
    void seek();
    void seekTest_data();
    void seekTest();
    void read_rawdata();
    void isSequential();
    void signalTest_data();
    void signalTest();
    void isClosedAfterClose();
    void readLine_data();
    void readLine();
    void canReadLine_data();
    void canReadLine();
    void atEnd();
    void readLineBoundaries();
    void writeAfterQByteArrayResize();

protected slots:
    void readyReadSlot();
    void bytesWrittenSlot(qint64 written);

private:
    qint64 totalBytesWritten;
    bool gotReadyRead;
};

// Testing get/set functions
void tst_QBuffer::getSetCheck()
{
    QBuffer obj1;
    // const QByteArray & QBuffer::data()
    // void QBuffer::setData(const QByteArray &)
    QByteArray var1("Bogus data");
    obj1.setData(var1);
    QCOMPARE(var1, obj1.data());
    obj1.setData(QByteArray());
    QCOMPARE(QByteArray(), obj1.data());
}

tst_QBuffer::tst_QBuffer()
{
}

// some status() tests, too
void tst_QBuffer::readBlock()
{
//    QTest::ignoreMessage(QtWarningMsg, "QIODevice::read: File not open");
//    QTest::ignoreMessage(QtWarningMsg, "QIODevice::read: Read operation not permitted");

    const int arraySize = 10;
    char a[arraySize];
    QBuffer b;
    QCOMPARE(b.read(a, arraySize), (qint64) -1); // not opened
    QVERIFY(b.atEnd());

    QByteArray ba;
    ba.resize(arraySize);
    b.setBuffer(&ba);
    b.open(QIODevice::WriteOnly);
    QTest::ignoreMessage(QtWarningMsg, "QIODevice::read: WriteOnly device");
    QCOMPARE(b.read(a, arraySize), (qint64) -1); // no read access
    b.close();

    b.open(QIODevice::ReadOnly);
    QCOMPARE(b.read(a, arraySize), (qint64) arraySize);
    QVERIFY(b.atEnd());

    // up to 3.0.x reading beyond the end was an error while ok
    // this has been made consistent with other QIODevice sub classes in 3.1
    QCOMPARE(b.read(a, 1), qint64(0));
    QVERIFY(b.atEnd());

    // read in two chunks
    b.close();
    b.open(QIODevice::ReadOnly);
    QCOMPARE(b.read(a, arraySize/2), (qint64) arraySize/2);
    QCOMPARE(b.read(a + arraySize/2, arraySize - arraySize/2),
            (qint64)(arraySize - arraySize/2));
    QVERIFY(b.atEnd());
}

void tst_QBuffer::readBlockPastEnd()
{
    QByteArray arr(4096 + 3616, 'd');
    QBuffer buf(&arr);

    buf.open(QIODevice::ReadOnly);
    char dummy[4096];

    buf.read(1);

    QCOMPARE(buf.read(dummy, 4096), qint64(4096));
    QCOMPARE(buf.read(dummy, 4096), qint64(3615));
    QVERIFY(buf.atEnd());
}

void tst_QBuffer::writeBlock_data()
{
    QTest::addColumn<QString>("str");

    QTest::newRow( "small_bytearray" ) << QString("Test");
    QTest::newRow( "large_bytearray" ) << QString("The QBuffer class is an I/O device that operates on a QByteArray.\n"
				       "QBuffer is used to read and write to a memory buffer. It is normally "
				       "used with a QTextStream or a QDataStream. QBuffer has an associated "
				       "QByteArray which holds the buffer data. The size() of the buffer is "
				       "automatically adjusted as data is written.\n"
				       "The constructor QBuffer(QByteArray) creates a QBuffer using an existing "
				       "byte array. The byte array can also be set with setBuffer(). Writing to "
				       "the QBuffer will modify the original byte array because QByteArray is "
				       "explicitly shared.\n"
				       "Use open() to open the buffer before use and to set the mode (read-only, "
				       "write-only, etc.). close() closes the buffer. The buffer must be closed "
				       "before reopening or calling setBuffer().\n"
				       "A common way to use QBuffer is through QDataStream or QTextStream, which "
				       "have constructors that take a QBuffer parameter. For convenience, there "
				       "are also QDataStream and QTextStream constructors that take a QByteArray "
				       "parameter. These constructors create and open an internal QBuffer.\n"
				       "Note that QTextStream can also operate on a QString (a Unicode string); a "
				       "QBuffer cannot.\n"
				       "You can also use QBuffer directly through the standard QIODevice functions "
				       "readBlock(), writeBlock() readLine(), at(), getch(), putch() and ungetch().\n"
				       "See also QFile, QDataStream, QTextStream, QByteArray, Shared Classes, Collection "
				       "Classes and Input/Output and Networking.\n\n"
				       "The QBuffer class is an I/O device that operates on a QByteArray.\n"
				       "QBuffer is used to read and write to a memory buffer. It is normally "
				       "used with a QTextStream or a QDataStream. QBuffer has an associated "
				       "QByteArray which holds the buffer data. The size() of the buffer is "
				       "automatically adjusted as data is written.\n"
				       "The constructor QBuffer(QByteArray) creates a QBuffer using an existing "
				       "byte array. The byte array can also be set with setBuffer(). Writing to "
				       "the QBuffer will modify the original byte array because QByteArray is "
				       "explicitly shared.\n"
				       "Use open() to open the buffer before use and to set the mode (read-only, "
				       "write-only, etc.). close() closes the buffer. The buffer must be closed "
				       "before reopening or calling setBuffer().\n"
				       "A common way to use QBuffer is through QDataStream or QTextStream, which "
				       "have constructors that take a QBuffer parameter. For convenience, there "
				       "are also QDataStream and QTextStream constructors that take a QByteArray "
				       "parameter. These constructors create and open an internal QBuffer.\n"
				       "Note that QTextStream can also operate on a QString (a Unicode string); a "
				       "QBuffer cannot.\n"
				       "You can also use QBuffer directly through the standard QIODevice functions "
				       "readBlock(), writeBlock() readLine(), at(), getch(), putch() and ungetch().\n"
				       "See also QFile, QDataStream, QTextStream, QByteArray, Shared Classes, Collection "
				       "Classes and Input/Output and Networking.\n\n"
				       "The QBuffer class is an I/O device that operates on a QByteArray.\n"
				       "QBuffer is used to read and write to a memory buffer. It is normally "
				       "used with a QTextStream or a QDataStream. QBuffer has an associated "
				       "QByteArray which holds the buffer data. The size() of the buffer is "
				       "automatically adjusted as data is written.\n"
				       "The constructor QBuffer(QByteArray) creates a QBuffer using an existing "
				       "byte array. The byte array can also be set with setBuffer(). Writing to "
				       "the QBuffer will modify the original byte array because QByteArray is "
				       "explicitly shared.\n"
				       "Use open() to open the buffer before use and to set the mode (read-only, "
				       "write-only, etc.). close() closes the buffer. The buffer must be closed "
				       "before reopening or calling setBuffer().\n"
				       "A common way to use QBuffer is through QDataStream or QTextStream, which "
				       "have constructors that take a QBuffer parameter. For convenience, there "
				       "are also QDataStream and QTextStream constructors that take a QByteArray "
				       "parameter. These constructors create and open an internal QBuffer.\n"
				       "Note that QTextStream can also operate on a QString (a Unicode string); a "
				       "QBuffer cannot.\n"
				       "You can also use QBuffer directly through the standard QIODevice functions "
				       "readBlock(), writeBlock() readLine(), at(), getch(), putch() and ungetch().\n"
				       "See also QFile, QDataStream, QTextStream, QByteArray, Shared Classes, Collection "
				       "Classes and Input/Output and Networking.");
}

void tst_QBuffer::writeBlock()
{
    QFETCH( QString, str );

    QByteArray ba;
    QBuffer buf( &ba );
    buf.open(QIODevice::ReadWrite);
    QByteArray data = str.toLatin1();
    QCOMPARE(buf.write( data.constData(), data.size() ), qint64(data.size()));

    QCOMPARE(buf.data(), str.toLatin1());
}

void tst_QBuffer::seek()
{
    QBuffer buffer;
    buffer.open(QIODevice::WriteOnly);
    QCOMPARE(buffer.size(), qint64(0));
    QCOMPARE(buffer.pos(), qint64(0));
    const qint64 pos = 10;
    QVERIFY(buffer.seek(pos));
    QCOMPARE(buffer.size(), pos);
}

void tst_QBuffer::seekTest_data()
{
    writeBlock_data();
}

#define DO_VALID_SEEK(position) {                                            \
    char c;                                                                  \
    QVERIFY(buf.seek(qint64(position)));                                      \
    QCOMPARE(buf.pos(), qint64(position));                                    \
    QVERIFY(buf.getChar(&c));                                                 \
    QCOMPARE(QChar(c), str.at(qint64(position)));                             \
}
#define DO_INVALID_SEEK(position) {                                          \
    qint64 prev_pos = buf.pos();                                             \
    QVERIFY(!buf.seek(qint64(position)));                                     \
    QCOMPARE(buf.pos(), prev_pos); /* position should not be changed */                  \
}

void tst_QBuffer::seekTest()
{
    QFETCH(QString, str);

    QByteArray ba;
    QBuffer buf(&ba);
#if 0
    QCOMPARE(buf.pos(), qint64(-1));
#endif
    buf.open(QIODevice::ReadWrite);
    QCOMPARE(buf.pos(), qint64(0));

    QByteArray data = str.toLatin1();
    QCOMPARE(buf.write( data.constData(), data.size() ), qint64(data.size()));

    QTest::ignoreMessage(QtWarningMsg, "QBuffer::seek: Invalid pos: -1");
    DO_INVALID_SEEK(-1);

    DO_VALID_SEEK(0);
    DO_VALID_SEEK(str.size() - 1);
    QVERIFY(buf.atEnd());
    DO_VALID_SEEK(str.size() / 2);

    // Special case: valid to seek one position past the buffer.
    // Its then legal to write, but not read.
    {
        char c = 'a';
        QVERIFY(buf.seek(qint64(str.size())));
        QCOMPARE(buf.read(&c, qint64(1)), qint64(0));
        QCOMPARE(c, 'a');
        QCOMPARE(buf.write(&c, qint64(1)), qint64(1));
    }

    // Special case 2: seeking to an arbitrary position beyond the buffer auto-expands it
    // (see Task 184730)
    {
        char c;
        const int offset = 1;
        Q_ASSERT(offset > 0); // any positive integer will do
        const qint64 pos = buf.size() + offset;
        QVERIFY(buf.seek(pos));
        QCOMPARE(buf.pos(), pos);
        QVERIFY(!buf.getChar(&c));
        QVERIFY(buf.seek(pos - 1));
        QVERIFY(buf.getChar(&c));
        QCOMPARE(c, buf.data().at(pos - 1));
        QVERIFY(buf.seek(pos));
        QVERIFY(buf.putChar(c));
    }
}

void tst_QBuffer::read_rawdata()
{
    static const unsigned char mydata[] = {
        0x01, 0x00, 0x03, 0x84, 0x78, 0x9c, 0x3b, 0x76,
        0xec, 0x18, 0xc3, 0x31, 0x0a, 0xf1, 0xcc, 0x99,
        0x6d, 0x5b
    };

    QByteArray data = QByteArray::fromRawData((const char *)mydata, sizeof(mydata));
    QBuffer buffer(&data);
    buffer.open(QIODevice::ReadOnly);
    QDataStream in(&buffer);
    quint8 ch;
    for (int i = 0; i < (int)sizeof(mydata); ++i) {
        QVERIFY(!buffer.atEnd());
        in >> ch;
        QVERIFY(ch == (quint8)mydata[i]);
    }
    QVERIFY(buffer.atEnd());
}

void tst_QBuffer::isSequential()
{
    QBuffer buf;
    QVERIFY(!buf.isSequential());
}

void tst_QBuffer::signalTest_data()
{
    QTest::addColumn<QByteArray>("sample");

    QTest::newRow("empty") << QByteArray();
    QTest::newRow("size 1") << QByteArray("1");
    QTest::newRow("size 2") << QByteArray("11");
    QTest::newRow("size 100") << QByteArray(100, '1');
}

void tst_QBuffer::signalTest()
{
    QFETCH(QByteArray, sample);

    totalBytesWritten = 0;

    QBuffer buf;
    buf.open(QIODevice::WriteOnly);

    buf.buffer().resize(sample.size() * 10);
    connect(&buf, SIGNAL(readyRead()), this, SLOT(readyReadSlot()));
    connect(&buf, SIGNAL(bytesWritten(qint64)), this, SLOT(bytesWrittenSlot(qint64)));

    for (int i = 0; i < 10; ++i) {
        gotReadyRead = false;
        QCOMPARE(buf.write(sample), qint64(sample.size()));
        if (sample.size() > 0) {
            QTestEventLoop::instance().enterLoop(5);
            if (QTestEventLoop::instance().timeout())
                QFAIL("Timed out when waiting for readyRead()");
            QCOMPARE(totalBytesWritten, qint64(sample.size() * (i + 1)));
            QVERIFY(gotReadyRead);
        } else {
            QCOMPARE(totalBytesWritten, qint64(0));
            QVERIFY(!gotReadyRead);
        }
    }
}

void tst_QBuffer::readyReadSlot()
{
    gotReadyRead = true;
    QTestEventLoop::instance().exitLoop();
}

void tst_QBuffer::bytesWrittenSlot(qint64 written)
{
    totalBytesWritten += written;
}

void tst_QBuffer::isClosedAfterClose()
{
    QBuffer buffer;
    buffer.open(QBuffer::ReadOnly);
    QVERIFY(buffer.isOpen());
    buffer.close();
    QVERIFY(!buffer.isOpen());
}

void tst_QBuffer::readLine_data()
{
    QTest::addColumn<QByteArray>("src");
    QTest::addColumn<int>("maxlen");
    QTest::addColumn<QByteArray>("expected");

    QTest::newRow("1") << QByteArray("line1\nline2\n") << 1024
                    << QByteArray("line1\n");
    QTest::newRow("2") << QByteArray("hi there") << 1024
                    << QByteArray("hi there");
    QTest::newRow("3") << QByteArray("l\n") << 3 << QByteArray("l\n");
    QTest::newRow("4") << QByteArray("l\n") << 2 << QByteArray("l");
}

void tst_QBuffer::readLine()
{
    QFETCH(QByteArray, src);
    QFETCH(int, maxlen);
    QFETCH(QByteArray, expected);

    QBuffer buf;
    buf.setBuffer(&src);
    char *result = new char[maxlen + 1];
    result[maxlen] = '\0';

    QVERIFY(buf.open(QIODevice::ReadOnly));

    qint64 bytes_read = buf.readLine(result, maxlen);

    QCOMPARE(bytes_read, qint64(expected.size()));
    QCOMPARE(QByteArray(result), expected);

    buf.close();
    delete[] result;

}

void tst_QBuffer::canReadLine_data()
{
    QTest::addColumn<QByteArray>("src");
    QTest::addColumn<bool>("expected");

    QTest::newRow("1") << QByteArray("no newline") << false;
    QTest::newRow("2") << QByteArray("two \n lines\n") << true;
    QTest::newRow("3") << QByteArray("\n") << true;
    QTest::newRow("4") << QByteArray() << false;
}

void tst_QBuffer::canReadLine()
{
    QFETCH(QByteArray, src);
    QFETCH(bool, expected);

    QBuffer buf;
    buf.setBuffer(&src);
    QVERIFY(!buf.canReadLine());
    QVERIFY(buf.open(QIODevice::ReadOnly));
    QCOMPARE(buf.canReadLine(), expected);
}

void tst_QBuffer::atEnd()
{
    QBuffer buffer;
    buffer.open(QBuffer::Append);
    buffer.write("heisann");
    buffer.close();

    buffer.open(QBuffer::ReadOnly);
    buffer.seek(buffer.size());
    char c;
    QVERIFY(!buffer.getChar(&c));
    QCOMPARE(buffer.read(&c, 1), qint64(0));
}

void tst_QBuffer::readLineBoundaries()
{
    QByteArray line = "This is a line\n";
    QBuffer buffer;
    buffer.open(QIODevice::ReadWrite);
    while (buffer.size() < 16384)
        buffer.write(line);

/*
    buffer.seek(0);
    QFile out1("out1.txt");
    out1.open(QFile::WriteOnly);
    out1.write(buffer.readAll());
    out1.close();
*/
    buffer.seek(0);

    char c;
    buffer.getChar(&c);
    buffer.ungetChar(c);

    QFile out2("out2.txt");
    out2.open(QFile::WriteOnly);
    while (!buffer.atEnd())
        out2.write(buffer.readLine());
    
    out2.close();
    out2.remove();
}

void tst_QBuffer::writeAfterQByteArrayResize()
{
    QBuffer buffer;
    QVERIFY(buffer.open(QIODevice::WriteOnly));

    buffer.write(QByteArray().fill('a', 1000));
    QCOMPARE(buffer.buffer().size(), 1000);

    // resize the QByteArray behind QBuffer's back
    buffer.buffer().clear();
    buffer.seek(0);
    QCOMPARE(buffer.buffer().size(), 0);

    buffer.write(QByteArray().fill('b', 1000));
    QCOMPARE(buffer.buffer().size(), 1000);
}

QTEST_MAIN(tst_QBuffer)
#include "tst_qbuffer.moc"
author	Eckhart Koeppen <eckhart.koppen@nokia.com>
	Thu, 29 Apr 2010 15:15:16 +0300 (2010-04-29)
branch	RCL_3
changeset 16	4b6ee5efea19
parent 4	3b1da2848fc7
permissions	-rw-r--r--