<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="zh">
<context>
<name></name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/previewframe.cpp" line="+73"/>
<source>The moose in the noose
ate the goose who was loose.</source>
<translation>The moose in the noose
ate the goose who was loose.</translation>
</message>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/signalsloteditorwindow.cpp" line="+647"/>
<source><object></source>
<translation><对象></translation>
</message>
<message>
<location line="+18"/>
<source><signal></source>
<translation><信号></translation>
</message>
<message>
<location line="+0"/>
<source><slot></source>
<translation><槽></translation>
</message>
</context>
<context>
<name>@default</name>
<message>
<source><object></source>
<translation type="obsolete"><对象></translation>
</message>
<message>
<source><signal></source>
<translation type="obsolete"><信号></translation>
</message>
<message>
<source><slot></source>
<translation type="obsolete"><槽></translation>
</message>
</context>
<context>
<name>AbstractFindWidget</name>
<message>
<location filename="../tools/shared/findwidget/abstractfindwidget.cpp" line="+127"/>
<source>&Previous</source>
<translation>&上一个</translation>
</message>
<message>
<location line="+8"/>
<source>&Next</source>
<translation>&下一个</translation>
</message>
<message>
<location line="+24"/>
<source>&Case sensitive</source>
<translation>&区分大小写</translation>
</message>
<message>
<location line="+8"/>
<source>Whole &words</source>
<translation>整&词</translation>
</message>
<message>
<location line="+12"/>
<source><img src=":/trolltech/shared/images/wrap.png">&nbsp;Search wrapped</source>
<translation><img src=":/trolltech/shared/images/wrap.png">&nbsp;搜索已回环</translation>
</message>
</context>
<context>
<name>AddLinkDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/addlinkdialog.ui"/>
<source>Insert Link</source>
<translation>插入链接</translation>
</message>
<message>
<location/>
<source>Title:</source>
<translation>标题：</translation>
</message>
<message>
<location/>
<source>URL:</source>
<translation>URL：</translation>
</message>
</context>
<context>
<name>AppFontDialog</name>
<message>
<location filename="../tools/designer/src/designer/appfontdialog.cpp" line="+418"/>
<source>Additional Fonts</source>
<translation>附加字体</translation>
</message>
</context>
<context>
<name>AppFontManager</name>
<message>
<location line="-267"/>
<source>'%1' is not a file.</source>
<translation>“%1”不是一个文件。</translation>
</message>
<message>
<location line="+4"/>
<source>The font file '%1' does not have read permissions.</source>
<translation>您没有读取字体文件“%1”的权限。</translation>
</message>
<message>
<location line="+8"/>
<source>The font file '%1' is already loaded.</source>
<translation>字体文件“%1”已经加载。</translation>
</message>
<message>
<location line="+7"/>
<source>The font file '%1' could not be loaded.</source>
<translation>字体文件“%1”无法加载。</translation>
</message>
<message>
<location line="+17"/>
<source>'%1' is not a valid font id.</source>
<translation>“%1”不是一个有效的字体标识。</translation>
</message>
<message>
<location line="+11"/>
<source>There is no loaded font matching the id '%1'.</source>
<translation>没有加载的字体与标识“%1”匹配。</translation>
</message>
<message>
<location line="+15"/>
<source>The font '%1' (%2) could not be unloaded.</source>
<translation>无法卸载字体“%1”(%2)。</translation>
</message>
</context>
<context>
<name>AppFontWidget</name>
<message>
<location line="+26"/>
<source>Fonts</source>
<translation>字体</translation>
</message>
<message>
<location line="+58"/>
<source>Add font files</source>
<translation>添加字体文件</translation>
</message>
<message>
<location line="+5"/>
<source>Remove current font file</source>
<translation>移除当前字体文件</translation>
</message>
<message>
<location line="+4"/>
<source>Remove all font files</source>
<translation>移除所有字体文件</translation>
</message>
<message>
<location line="+19"/>
<source>Add Font Files</source>
<translation>添加字体文件</translation>
</message>
<message>
<location line="+1"/>
<source>Font files (*.ttf)</source>
<translation>字体文件(*.ttf)</translation>
</message>
<message>
<location line="+13"/>
<source>Error Adding Fonts</source>
<translation>添加字体错误</translation>
</message>
<message>
<location line="+24"/>
<source>Error Removing Fonts</source>
<translation>移除字体错误</translation>
</message>
<message>
<location line="+22"/>
<source>Remove Fonts</source>
<translation>移除字体</translation>
</message>
<message>
<location line="+0"/>
<source>Would you like to remove all fonts?</source>
<translation>是否要移除所有字体？</translation>
</message>
</context>
<context>
<name>AppearanceOptionsWidget</name>
<message>
<location filename="../tools/designer/src/designer/qdesigner_appearanceoptions.ui"/>
<source>Form</source>
<translation>窗体</translation>
</message>
<message>
<location/>
<source>User Interface Mode</source>
<translation>用户界面模式</translation>
</message>
</context>
<context>
<name>AssistantClient</name>
<message>
<location filename="../tools/designer/src/designer/assistantclient.cpp" line="+100"/>
<source>Unable to send request: Assistant is not responding.</source>
<translation>无法发送请求：助手无响应。</translation>
</message>
<message>
<location line="+39"/>
<source>The binary '%1' does not exist.</source>
<translation>二进制文件“%1”不存在。</translation>
</message>
<message>
<location line="+9"/>
<source>Unable to launch assistant (%1).</source>
<translation>无法运行助手(%1)。</translation>
</message>
</context>
<context>
<name>BrushManagerProxy</name>
<message>
<location filename="../tools/designer/src/components/formeditor/brushmanagerproxy.cpp" line="+221"/>
<source>The element '%1' is missing the required attribute '%2'.</source>
<translation>组件“%1”缺少必需的属性“%2”。</translation>
</message>
<message>
<location line="+11"/>
<source>Empty brush name encountered.</source>
<translation>遇到空白画刷名称。</translation>
</message>
<message>
<location line="+10"/>
<source>An unexpected element '%1' was encountered.</source>
<translation>遇到未知组件“%1”。</translation>
</message>
<message>
<location line="+7"/>
<source>An error occurred when reading the brush definition file '%1' at line line %2, column %3: %4</source>
<translation>读取画刷定义文件“%1”出错，行%2，列%3：%4</translation>
</message>
<message>
<location line="+43"/>
<source>An error occurred when reading the resource file '%1' at line %2, column %3: %4</source>
<translation>读取资源文件“%1”出错，行%2，列%3：%4</translation>
</message>
</context>
<context>
<name>BrushPropertyManager</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/brushpropertymanager.cpp" line="+52"/>
<source>No brush</source>
<translation>无画刷</translation>
</message>
<message>
<location line="+1"/>
<source>Solid</source>
<translation>实心的</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 1</source>
<translation>稠密 1</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 2</source>
<translation>稠密 2</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 3</source>
<translation>稠密 3</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 4</source>
<translation>稠密 4</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 5</source>
<translation>稠密 5</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 6</source>
<translation>稠密 6</translation>
</message>
<message>
<location line="+1"/>
<source>Dense 7</source>
<translation>稠密 7</translation>
</message>
<message>
<location line="+1"/>
<source>Horizontal</source>
<translation>水平的</translation>
</message>
<message>
<location line="+1"/>
<source>Vertical</source>
<translation>垂直的</translation>
</message>
<message>
<location line="+1"/>
<source>Cross</source>
<translation>交叉的</translation>
</message>
<message>
<location line="+1"/>
<source>Backward diagonal</source>
<translation>反向斜线</translation>
</message>
<message>
<location line="+1"/>
<source>Forward diagonal</source>
<translation>正向斜线</translation>
</message>
<message>
<location line="+1"/>
<source>Crossing diagonal</source>
<translation>交叉斜线</translation>
</message>
<message>
<location line="+83"/>
<source>Style</source>
<translation>风格</translation>
</message>
<message>
<location line="+11"/>
<source>Color</source>
<translation>颜色</translation>
</message>
<message>
<location line="+105"/>
<source>[%1, %2]</source>
<translation>[%1, %2]</translation>
</message>
</context>
<context>
<name>Command</name>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/signalsloteditor.cpp" line="+208"/>
<location line="+258"/>
<source>Change signal</source>
<translation>改变信号</translation>
</message>
<message>
<location line="-256"/>
<location line="+268"/>
<source>Change slot</source>
<translation>改变槽</translation>
</message>
<message>
<location line="-220"/>
<source>Change signal-slot connection</source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+234"/>
<source>Change sender</source>
<translation>改变发送者</translation>
</message>
<message>
<location line="+18"/>
<source>Change receiver</source>
<translation>改变接收者</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/connectionedit.cpp" line="+143"/>
<source>Add connection</source>
<translation>添加连接</translation>
</message>
<message>
<location line="+54"/>
<source>Adjust connection</source>
<translation>调整连接</translation>
</message>
<message>
<location line="+19"/>
<source>Delete connections</source>
<translation>删除连接</translation>
</message>
<message>
<location line="+58"/>
<source>Change source</source>
<translation>改变源</translation>
</message>
<message>
<location line="+2"/>
<source>Change target</source>
<translation>改变目标</translation>
</message>
<message>
<source>changed '%1' of '%2'</source>
<translation type="obsolete">已经改变“%2”的“%1”</translation>
</message>
<message>
<source>reset '%1' of '%2'</source>
<translation type="obsolete">重置“%2”的“%1”</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_command.cpp" line="+149"/>
<source>Insert '%1'</source>
<translation>插入“%1”</translation>
</message>
<message>
<location line="+167"/>
<source>Raise '%1'</source>
<translation>上移“%1”</translation>
</message>
<message>
<location line="+33"/>
<source>Lower '%1'</source>
<translation>下移“%1”</translation>
</message>
<message>
<location line="+113"/>
<source>Delete '%1'</source>
<translation>删除“%1”</translation>
</message>
<message>
<location line="+119"/>
<source>Reparent '%1'</source>
<translation>重定义“%1”的父对象</translation>
</message>
<message>
<location line="+53"/>
<source>Promote to custom widget</source>
<translation>提升至自定义窗口部件</translation>
</message>
<message>
<location line="+42"/>
<source>Demote from custom widget</source>
<translation>取消自定义窗口部件</translation>
</message>
<message>
<location line="+79"/>
<source>Lay out using grid</source>
<translation>使用栅格布局</translation>
</message>
<message>
<location line="+3"/>
<source>Lay out vertically</source>
<translation>垂直布局</translation>
</message>
<message>
<location line="+3"/>
<source>Lay out horizontally</source>
<translation>水平布局</translation>
</message>
<message>
<location line="+41"/>
<source>Break layout</source>
<translation>取消布局</translation>
</message>
<message>
<location line="+240"/>
<location line="+235"/>
<location line="+78"/>
<source>Move Page</source>
<translation>移动页</translation>
</message>
<message>
<location line="-279"/>
<location line="+123"/>
<location line="+188"/>
<location line="+666"/>
<source>Delete Page</source>
<translation>删除页</translation>
</message>
<message>
<location line="-939"/>
<location line="+123"/>
<source>Page</source>
<translation>页</translation>
</message>
<message>
<location line="-121"/>
<location line="+309"/>
<location line="+672"/>
<source>page</source>
<translation>页</translation>
</message>
<message>
<location line="-978"/>
<location line="+123"/>
<location line="+186"/>
<location line="+667"/>
<source>Insert Page</source>
<translation>插入页</translation>
</message>
<message>
<location line="-856"/>
<source>tab</source>
<translation>标签页</translation>
</message>
<message>
<location line="+209"/>
<source>Change Tab order</source>
<translation>改变制表符顺序</translation>
</message>
<message>
<location line="+28"/>
<source>Create Menu Bar</source>
<translation>创建菜单栏</translation>
</message>
<message>
<location line="+44"/>
<source>Delete Menu Bar</source>
<translation>删除菜单栏</translation>
</message>
<message>
<location line="+47"/>
<source>Create Status Bar</source>
<translation>创建状态栏</translation>
</message>
<message>
<location line="+42"/>
<source>Delete Status Bar</source>
<translation>删除状态栏</translation>
</message>
<message>
<location line="+45"/>
<source>Add Tool Bar</source>
<translation>添加工具栏</translation>
</message>
<message>
<source>Set Dock Window Widget</source>
<translation type="obsolete">设定锚接窗口窗口部件</translation>
</message>
<message>
<location line="+59"/>
<source>Add Dock Window</source>
<translation>添加锚接窗口</translation>
</message>
<message>
<location line="+53"/>
<source>Adjust Size of '%1'</source>
<translation>调整“%1”的大小</translation>
</message>
<message>
<location line="+57"/>
<source>Change Form Layout Item Geometry</source>
<translation>改变表单布局项的几何位置</translation>
</message>
<message>
<location line="+95"/>
<source>Change Layout Item Geometry</source>
<translation>改变布局项的几何位置</translation>
</message>
<message>
<location line="+576"/>
<source>Change Table Contents</source>
<translation>改变表格内容</translation>
</message>
<message>
<location line="+107"/>
<source>Change Tree Contents</source>
<translation>改变树内容</translation>
</message>
<message>
<location line="+74"/>
<location line="+146"/>
<source>Add action</source>
<translation>添加动作</translation>
</message>
<message>
<location line="-120"/>
<location line="+126"/>
<source>Remove action</source>
<translation>移除动作</translation>
</message>
<message>
<location line="+53"/>
<source>Add menu</source>
<translation>添加菜单</translation>
</message>
<message>
<location line="+6"/>
<source>Remove menu</source>
<translation>移除菜单</translation>
</message>
<message>
<location line="+6"/>
<source>Create submenu</source>
<translation>创建子菜单</translation>
</message>
<message>
<location line="+31"/>
<source>Delete Tool Bar</source>
<translation>删除工具栏</translation>
</message>
<message numerus="yes">
<source>changed '%1' of %2 objects</source>
<translation type="obsolete">
<numerusform>已经改变“%2”对象的“%1”</numerusform>
</translation>
</message>
<message numerus="yes">
<source>reset '%1' of %2 objects</source>
<translation type="obsolete">
<numerusform>重置“%2”对象的“%1”</numerusform>
</translation>
</message>
<message>
<source>add dynamic property '%1' to '%2'</source>
<translation type="obsolete">为“%2”添加动态属性“%1”</translation>
</message>
<message numerus="yes">
<source>add dynamic property '%1' to %2 objects</source>
<translation type="obsolete">
<numerusform>为 %2 个对象添加动态属性“%1”</numerusform>
</translation>
</message>
<message>
<source>remove dynamic property '%1' from '%2'</source>
<translation type="obsolete">移除“%2”的动态属性“%1”</translation>
</message>
<message numerus="yes">
<source>remove dynamic property '%1' from %2 objects</source>
<translation type="obsolete">
<numerusform>移除“%2”对象的动态属性“%1”</numerusform>
</translation>
</message>
<message>
<source>changed comment of '%1' of '%2'</source>
<translation type="obsolete">已经改变“%2”的注释“%1”</translation>
</message>
<message numerus="yes">
<source>changed comment of '%1' of %2 objects</source>
<translation type="obsolete">
<numerusform>已经改变“%2”对象的注释“%1”</numerusform>
</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_menu.cpp" line="+1161"/>
<source>Set action text</source>
<translation>设定动作文本</translation>
</message>
<message>
<location line="+3"/>
<source>Insert action</source>
<translation>插入动作</translation>
</message>
<message>
<location line="+89"/>
<location filename="../tools/designer/src/lib/shared/qdesigner_menubar.cpp" line="+891"/>
<source>Move action</source>
<translation>移动动作</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_menubar.cpp" line="-404"/>
<source>Change Title</source>
<translation>改变标题</translation>
</message>
<message>
<location line="+2"/>
<source>Insert Menu</source>
<translation>插入菜单</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_command.cpp" line="-2641"/>
<source>Change Z-order of '%1'</source>
<translation>改变“%1”的 Z 顺序</translation>
</message>
<message>
<location line="+625"/>
<source>Simplify Grid Layout</source>
<translation>简易网格布局</translation>
</message>
<message>
<location line="+1149"/>
<source>Delete Subwindow</source>
<translation>删除子窗口</translation>
</message>
<message>
<location line="+44"/>
<source>Insert Subwindow</source>
<translation>插入子窗口</translation>
</message>
<message>
<location line="+2"/>
<source>subwindow</source>
<translation>子窗口</translation>
</message>
<message>
<location line="+1"/>
<source>Subwindow</source>
<translation>子窗口</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/signalslotdialog.cpp" line="+202"/>
<source>Change signals/slots</source>
<translation>改变信号/槽</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/button_taskmenu.cpp" line="+225"/>
<source>Create button group</source>
<translation>创建按钮组</translation>
</message>
<message>
<location line="+27"/>
<source>Break button group</source>
<translation>分拆按钮组</translation>
</message>
<message>
<location line="+9"/>
<source>Break button group '%1'</source>
<translation>分拆按钮组“%1”</translation>
</message>
<message>
<location line="+17"/>
<source>Add buttons to group</source>
<translation>向组里添加按钮</translation>
</message>
<message>
<location line="+8"/>
<location filename="../tools/designer/src/lib/shared/formlayoutmenu.cpp" line="+458"/>
<source>Add '%1' to '%2'</source>
<extracomment>Command description for adding buttons to a QButtonGroup</extracomment>
<translation>添加“%1”到“%2”</translation>
</message>
<message>
<location line="+14"/>
<source>Remove buttons from group</source>
<translation>从组中移除按钮</translation>
</message>
<message>
<location line="+15"/>
<source>Remove '%1' from '%2'</source>
<extracomment>Command description for removing buttons from a QButtonGroup</extracomment>
<translation>从“%2”中移除“%1”</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/morphmenu.cpp" line="+349"/>
<source>Morph %1/'%2' into %3</source>
<extracomment>MorphWidgetCommand description</extracomment>
<translation>将%1/“%2”变形为%3</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_command2.cpp" line="+154"/>
<source>Change layout of '%1' from %2 to %3</source>
<translation>将“%1”的布局从%2变为%3</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/scriptcommand.cpp" line="+55"/>
<source>Change script</source>
<translation>改变脚本</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_propertycommand.cpp" line="+1209"/>
<source>Changed '%1' of '%2'</source>
<translation>已改变“%2”个中的“%1”个</translation>
</message>
<message numerus="yes">
<location line="+3"/>
<source>Changed '%1' of %n objects</source>
<translation>
<numerusform>已改变%n个对象中的“%1”个</numerusform>
</translation>
</message>
<message>
<location line="+76"/>
<source>Reset '%1' of '%2'</source>
<translation>已重置“%2”个中的“%1”个</translation>
</message>
<message numerus="yes">
<location line="+3"/>
<source>Reset '%1' of %n objects</source>
<translation>
<numerusform>已重置%n个对象中的“%1”个</numerusform>
</translation>
</message>
<message>
<location line="+89"/>
<source>Add dynamic property '%1' to '%2'</source>
<translation>添加动态属性“%1”到“%2”</translation>
</message>
<message numerus="yes">
<location line="+3"/>
<source>Add dynamic property '%1' to %n objects</source>
<translation>
<numerusform>添加动态属性“%1”到%n个对象</numerusform>
</translation>
</message>
<message>
<location line="+86"/>
<source>Remove dynamic property '%1' from '%2'</source>
<translation>从“%2”中移除动态属性“%1”</translation>
</message>
<message numerus="yes">
<location line="+3"/>
<source>Remove dynamic property '%1' from %n objects</source>
<translation>
<numerusform>从%n个对象中移除动态属性“%1”</numerusform>
</translation>
</message>
</context>
<context>
<name>ConnectDialog</name>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/connectdialog.ui"/>
<source>Configure Connection</source>
<translation>配置连接</translation>
</message>
<message>
<location/>
<source>GroupBox</source>
<translation>GroupBox</translation>
</message>
<message>
<location/>
<source>Edit...</source>
<translation>编辑...</translation>
</message>
<message>
<location/>
<source>Show signals and slots inherited from QWidget</source>
<translation>显示从 QWidget 继承的信号和槽</translation>
</message>
</context>
<context>
<name>DPI_Chooser</name>
<message>
<location filename="../tools/designer/src/components/formeditor/dpi_chooser.cpp" line="+69"/>
<source>Standard (96 x 96)</source>
<extracomment>Embedded device standard screen resolution</extracomment>
<translation>标准(96 x 96)</translation>
</message>
<message>
<location line="+2"/>
<source>Greenphone (179 x 185)</source>
<extracomment>Embedded device screen resolution</extracomment>
<translation>Greenphone (179 x 185)</translation>
</message>
<message>
<location line="+2"/>
<source>High (192 x 192)</source>
<extracomment>Embedded device high definition screen resolution</extracomment>
<translation>高(192 x 192)</translation>
</message>
</context>
<context>
<name>Designer</name>
<message>
<location filename="../tools/designer/src/components/formeditor/qdesigner_resource.cpp" line="+439"/>
<source>Qt Designer</source>
<translation>Qt 设计师</translation>
</message>
<message>
<source>This file contains top level spacers.<br>They have <b>NOT</b> been saved into the form.<br>Perhaps you forgot to create a layout?</source>
<translation type="obsolete">这个文件包含顶级间隔器。<br>它们<b>不能</b>被保存到这个窗体中。<br>也许您忘记了创建一个布局？</translation>
</message>
<message>
<source>This file was created using Designer from Qt-%1 and will be converted to a new form by Qt Designer.
The old form has been untouched, but you will have to save this form under a new name.</source>
<translation type="obsolete">这个文件是由 Qt-%1 中的设计师创建的，并且将会被转换成为 Qt 设计师中的一个新的窗体。
旧的窗体没有改变，但是您将不得不使用新的名称保存这个表单。</translation>
</message>
<message>
<location line="+1028"/>
<source>Custom Widgets</source>
<translation>自定义窗口部件</translation>
</message>
<message>
<location line="+12"/>
<source>Promoted Widgets</source>
<translation>提升窗口部件</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_utils.cpp" line="+682"/>
<source>Unable to launch %1.</source>
<translation>不能启动 %1。</translation>
</message>
<message>
<location line="+4"/>
<source>%1 timed out.</source>
<translation>%1 超时。</translation>
</message>
<message>
<location filename="../tools/designer/src/components/formeditor/qdesigner_resource.cpp" line="-823"/>
<source>This file cannot be read because it was created using %1.</source>
<translation>不能读取这个文件，因为它是被使用 %1 创建的。</translation>
</message>
<message>
<location line="+116"/>
<source>This file cannot be read because the extra info extension failed to load.</source>
<translation>不能读取这个文件，因为加载额外信息扩展失败。</translation>
</message>
<message>
<location line="-72"/>
<source>The converted file could not be read.</source>
<translation>不能读取已转换的文件。</translation>
</message>
<message>
<source>This file was created using Designer from Qt-%1 and could not be read:<br>%2<br>Please run it through <b>uic3 -convert</b> to convert it to Qt-4's ui format.</source>
<translation type="obsolete">这个文件是由 Qt-%1 中的设计师创建的，并且无法读取：<br>%2<br>请使用<b>uic3 -convert</b>处理它把它转换成为 Qt-4 的用户界面格式。</translation>
</message>
<message>
<location line="-30"/>
<source>This file was created using Designer from Qt-%1 and cannot be read.</source>
<translation>这个文件是由 Qt-%1 中的设计师创建的，并且无法读取。</translation>
</message>
<message>
<location line="-221"/>
<source>This file contains top level spacers.<br>They have <b>NOT</b> been saved into the form.</source>
<translation>该文件包含一些顶级分隔符。<br> 它们<b>未</b>被保存到表单中。</translation>
</message>
<message>
<location line="+2"/>
<source>Perhaps you forgot to create a layout?</source>
<translation>可能你忘记了创建布局？</translation>
</message>
<message>
<location line="+173"/>
<source>Invalid ui file: The root element <ui> is missing.</source>
<translation>无效ui文件：缺少根元素<ui>。</translation>
</message>
<message>
<location line="+6"/>
<source>An error has occurred while reading the ui file at line %1, column %2: %3</source>
<translation>读取ui文件出现错误，行%1，列%2：%3</translation>
</message>
<message>
<location line="+74"/>
<source>This file was created using Designer from Qt-%1 and will be converted to a new form by Qt Designer.</source>
<translation>这个文件是用Qt-%1的设计师生成的，将会自动转换成新的窗体文件。</translation>
</message>
<message>
<location line="+3"/>
<source>The old form has not been touched, but you will have to save the form under a new name.</source>
<translation>旧的窗体文件不会做任何变动，但是您必须另存新文件。</translation>
</message>
<message>
<location line="+11"/>
<source>This file was created using Designer from Qt-%1 and could not be read:
%2</source>
<translation>这个文件是由 Qt-%1 中的设计师创建的，并且无法读取：
%2</translation>
</message>
<message>
<location line="+3"/>
<source>Please run it through <b>uic3&nbsp;-convert</b> to convert it to Qt-4's ui format.</source>
<translation>请通过运行 <b>uic3&nbsp;-convert</b> 将它转换成Qt-4的ui格式。</translation>
</message>
</context>
<context>
<name>DesignerMetaEnum</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_utils.cpp" line="-513"/>
<source>%1 is not a valid enumeration value of '%2'.</source>
<translation>%1 不是“%2”中的一个有效的枚举值。</translation>
</message>
<message>
<location line="+5"/>
<source>'%1' could not be converted to an enumeration value of type '%2'.</source>
<translation>无法将“%1”转换成“%2”中的一个枚举值。</translation>
</message>
</context>
<context>
<name>DesignerMetaFlags</name>
<message>
<location line="+78"/>
<source>'%1' could not be converted to a flag value of type '%2'.</source>
<translation>无法将“%1”转换成“%2”中的一个标记值。</translation>
</message>
</context>
<context>
<name>DeviceProfile</name>
<message>
<location filename="../tools/designer/src/lib/shared/deviceprofile.cpp" line="+397"/>
<source>'%1' is not a number.</source>
<extracomment>Reading a number for an embedded device profile</extracomment>
<translation>'%1'不是一个数字</translation>
</message>
<message>
<location line="+23"/>
<source>An invalid tag <%1> was encountered.</source>
<translation>遇到一个无效的标签<%1>。</translation>
</message>
</context>
<context>
<name>DeviceProfileDialog</name>
<message>
<location filename="../tools/designer/src/components/formeditor/deviceprofiledialog.ui"/>
<source>&Family</source>
<translation>字体族(&F)</translation>
</message>
<message>
<location/>
<source>&Point Size</source>
<translation>点大小(&P)</translation>
</message>
<message>
<location/>
<source>Style</source>
<translation>风格</translation>
</message>
<message>
<location/>
<source>Device DPI</source>
<translation>设备的DPI</translation>
</message>
<message>
<location/>
<source>Name</source>
<translation>名称</translation>
</message>
</context>
<context>
<name>DeviceSkin</name>
<message>
<location filename="../tools/shared/deviceskin/deviceskin.cpp" line="+79"/>
<source>The image file '%1' could not be loaded.</source>
<translation>无法加载图像文件“%1”。</translation>
</message>
<message>
<location line="+64"/>
<source>The skin directory '%1' does not contain a configuration file.</source>
<translation>皮肤目录“%1”下没有配置文件。</translation>
</message>
<message>
<location line="+5"/>
<source>The skin configuration file '%1' could not be opened.</source>
<translation>无法打开皮肤配置文件“%1”。</translation>
</message>
<message>
<location line="+6"/>
<source>The skin configuration file '%1' could not be read: %2</source>
<translation>无法读取皮肤配置文件“%1”：%2</translation>
</message>
<message>
<location line="+70"/>
<source>Syntax error: %1</source>
<translation>语法错误：%1</translation>
</message>
<message>
<location line="+21"/>
<source>The skin "up" image file '%1' does not exist.</source>
<translation>皮肤“up”图像文件“%1”并不存在。</translation>
</message>
<message>
<location line="+10"/>
<source>The skin "down" image file '%1' does not exist.</source>
<translation>皮肤“down”图像文件“%1”并不存在。</translation>
</message>
<message>
<location line="+11"/>
<source>The skin "closed" image file '%1' does not exist.</source>
<translation>皮肤“closed”图像文件“%1”并不存在。</translation>
</message>
<message>
<location line="+12"/>
<source>The skin cursor image file '%1' does not exist.</source>
<translation>皮肤光标图像文件“%1”并不存在。</translation>
</message>
<message>
<location line="+25"/>
<source>Syntax error in area definition: %1</source>
<translation>区域定义语法错误：%1</translation>
</message>
<message>
<location line="+38"/>
<source>Mismatch in number of areas, expected %1, got %2.</source>
<translation>区域数量不匹配，应该是 %1，而实际是 %2。</translation>
</message>
</context>
<context>
<name>EmbeddedOptionsControl</name>
<message>
<source>None</source>
<translation type="obsolete">无</translation>
</message>
<message>
<source>Add a profile</source>
<translation type="obsolete">添加描述文件</translation>
</message>
<message>
<source>Edit the selected profile</source>
<translation type="obsolete">编辑选中的描述文件</translation>
</message>
<message>
<source>Delete the selected profile</source>
<translation type="obsolete">删除选中的描述文件</translation>
</message>
<message>
<source>Add Profile</source>
<translation type="obsolete">添加描述文件</translation>
</message>
<message>
<source>New profile</source>
<translation type="obsolete">新建描述文件</translation>
</message>
<message>
<source>Edit Profile</source>
<translation type="obsolete">编辑描述文件</translation>
</message>
<message>
<source>Delete Profile</source>
<translation type="obsolete">删除描述文件</translation>
</message>
<message>
<source>Would you like to delete the profile '%1'?</source>
<translation type="obsolete">你要删除描述文件“%1”吗？</translation>
</message>
<message>
<location filename="../tools/designer/src/components/formeditor/embeddedoptionspage.cpp" line="+311"/>
<source><html><table><tr><td><b>Font</b></td><td>%1, %2</td></tr><tr><td><b>Style</b></td><td>%3</td></tr><tr><td><b>Resolution</b></td><td>%4 x %5</td></tr></table></html></source>
<extracomment>Format embedded device profile description</extracomment>
<translation><html><table><tr><td><b>字体</b></td><td>%1，%2</td></tr><tr><td><b>风格</b></td><td>%3</td><tr><td><b>解析度</b></td><td>%4 x %5</td></tr></table></html></translation>
</message>
<message>
<source>Default</source>
<translation type="obsolete">默认</translation>
</message>
</context>
<context>
<name>EmbeddedOptionsPage</name>
<message>
<location line="+103"/>
<source>Embedded Design</source>
<extracomment>Tab in preferences dialog</extracomment>
<translation>嵌入式设计</translation>
</message>
<message>
<location line="+10"/>
<source>Device Profiles</source>
<extracomment>EmbeddedOptionsControl group box"</extracomment>
<translation>设备描述文件</translation>
</message>
</context>
<context>
<name>FindWidget</name>
<message>
<source>Previous</source>
<translation type="obsolete">上一个</translation>
</message>
<message>
<source>Next</source>
<translation type="obsolete">下一个</translation>
</message>
<message>
<source>Case sensitive</source>
<translation type="obsolete">区分大小写</translation>
</message>
<message>
<source>Whole words</source>
<translation type="obsolete">整词</translation>
</message>
<message>
<source><img src=":/trolltech/shared/images/wrap.png">&nbsp;Search wrapped</source>
<translation type="obsolete"><img src=":/trolltech/shared/images/wrap.png">&nbsp;搜索已回环。</translation>
</message>
</context>
<context>
<name>FontPanel</name>
<message>
<location filename="../tools/shared/fontpanel/fontpanel.cpp" line="+63"/>
<source>Font</source>
<translation>字体</translation>
</message>
<message>
<location line="+11"/>
<source>&Writing system</source>
<translation>书写系统(&W)</translation>
</message>
<message>
<location line="+3"/>
<source>&Family</source>
<translation>字体族(&F)</translation>
</message>
<message>
<location line="+4"/>
<source>&Style</source>
<translation>风格(&S)</translation>
</message>
<message>
<location line="+4"/>
<source>&Point size</source>
<translation>点大小(&P)</translation>
</message>
</context>
<context>
<name>FontPropertyManager</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/fontpropertymanager.cpp" line="+62"/>
<source>PreferDefault</source>
<translation>首选默认</translation>
</message>
<message>
<location line="+1"/>
<source>NoAntialias</source>
<translation>无反锯齿</translation>
</message>
<message>
<location line="+1"/>
<source>PreferAntialias</source>
<translation>首选反锯齿</translation>
</message>
<message>
<location line="+61"/>
<source>Antialiasing</source>
<translation>反锯齿</translation>
</message>
</context>
<context>
<name>FormBuilder</name>
<message>
<location filename="../tools/designer/src/lib/uilib/formbuilderextra.cpp" line="+351"/>
<source>Invalid stretch value for '%1': '%2'</source>
<extracomment>Parsing layout stretch values</extracomment>
<translation>“%1”：“%2”无效的拉伸值</translation>
</message>
<message>
<location line="+62"/>
<source>Invalid minimum size for '%1': '%2'</source>
<extracomment>Parsing grid layout minimum size values</extracomment>
<translation>“%1”：“%2”无效的最小值</translation>
</message>
</context>
<context>
<name>FormEditorOptionsPage</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formeditor_optionspage.cpp" line="+91"/>
<source>%1 %</source>
<translation>%1 %</translation>
</message>
<message>
<location line="+4"/>
<source>Preview Zoom</source>
<translation>预览缩放</translation>
</message>
<message>
<location line="+2"/>
<source>Default Zoom</source>
<translation>默认缩放</translation>
</message>
<message>
<location line="+29"/>
<source>Forms</source>
<extracomment>Tab in preferences dialog</extracomment>
<translation>表单</translation>
</message>
<message>
<location line="+13"/>
<source>Default Grid</source>
<translation>默认栅格</translation>
</message>
</context>
<context>
<name>FormLayoutRowDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/formlayoutrowdialog.ui"/>
<source>Add Form Layout Row</source>
<translation>添加表单布局行</translation>
</message>
<message>
<location/>
<source>&Label text:</source>
<translation>标签文字(&L)：</translation>
</message>
<message>
<location/>
<source>Field &type:</source>
<translation>字段类型(&T)：</translation>
</message>
<message>
<location/>
<source>&Field name:</source>
<translation>字段名称(&F)：</translation>
</message>
<message>
<location/>
<source>&Buddy:</source>
<translation>伙伴(&B)：</translation>
</message>
<message>
<location/>
<source>&Row:</source>
<translation>行(&R)：</translation>
</message>
<message>
<location/>
<source>Label &name:</source>
<translation>标签名称(&N)：</translation>
</message>
</context>
<context>
<name>FormWindow</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formwindow.cpp" line="+1705"/>
<source>Unexpected element <%1></source>
<translation>未预期的元素<%1></translation>
</message>
<message>
<location line="+7"/>
<source>Error while pasting clipboard contents at line %1, column %2: %3</source>
<translation>粘贴剪贴板内容时发生错误，行%1，列%2：%3</translation>
</message>
</context>
<context>
<name>FormWindowSettings</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formwindowsettings.ui"/>
<source>Form Settings</source>
<translation>窗体设定</translation>
</message>
<message>
<location/>
<source>&Pixmap Function</source>
<translation>像素映射功能(&P)</translation>
</message>
<message>
<location/>
<source>&Include Hints</source>
<translation>包含提示(&I)</translation>
</message>
<message>
<location/>
<source>Embedded Design</source>
<translation>嵌入式设计</translation>
</message>
<message>
<location/>
<source>&Author</source>
<translation>作者(&A)</translation>
</message>
<message>
<location/>
<source>Layout &Default</source>
<translation>默认布局(&D)</translation>
</message>
<message>
<location/>
<source>&Spacing:</source>
<translation>间距(&S)：</translation>
</message>
<message>
<location/>
<source>&Margin:</source>
<translation>边距(&M)：</translation>
</message>
<message>
<location/>
<source>&Layout Function</source>
<translation>布局功能(&L)</translation>
</message>
<message>
<location/>
<source>Ma&rgin:</source>
<translation>边距(&R)：</translation>
</message>
<message>
<location/>
<source>Spa&cing:</source>
<translation>间距(&C)：</translation>
</message>
<message>
<location/>
<source>Grid</source>
<translation>栅格</translation>
</message>
</context>
<context>
<name>IconSelector</name>
<message>
<location filename="../tools/designer/src/lib/shared/iconselector.cpp" line="+353"/>
<source>All Pixmaps (</source>
<translation>所有像素映射 (</translation>
</message>
</context>
<context>
<name>ItemPropertyBrowser</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/itemlisteditor.cpp" line="+66"/>
<source>XX Icon Selected off</source>
<extracomment>Sample string to determinate the width for the first column of the list item property browser</extracomment>
<translation>XX图标选择关闭</translation>
</message>
</context>
<context>
<name>LanguageResourceDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/iconselector.cpp" line="-235"/>
<source>Choose Resource</source>
<translation>选择资源</translation>
</message>
</context>
<context>
<name>MainWindowBase</name>
<message>
<location filename="../tools/designer/src/designer/mainwindow.cpp" line="+119"/>
<source>Main</source>
<extracomment>Not currently used (main tool bar)</extracomment>
<translation>主要</translation>
</message>
<message>
<location line="+6"/>
<source>File</source>
<translation>文件</translation>
</message>
<message>
<location line="+1"/>
<source>Edit</source>
<translation>编辑</translation>
</message>
<message>
<location line="+1"/>
<source>Tools</source>
<translation>工具</translation>
</message>
<message>
<location line="+1"/>
<source>Form</source>
<translation>窗体</translation>
</message>
<message>
<location line="+7"/>
<source>Qt Designer</source>
<translation>Qt 设计师</translation>
</message>
</context>
<context>
<name>NewForm</name>
<message>
<source>Error loading form</source>
<translation type="obsolete">加载窗体错误</translation>
</message>
<message>
<source>Choose a template for a preview</source>
<translation type="obsolete">选择一个用于预览的模板</translation>
</message>
<message>
<location filename="../tools/designer/src/designer/newform.cpp" line="+83"/>
<source>New Form</source>
<translation>新建窗体</translation>
</message>
<message>
<source>0</source>
<translation type="obsolete">0</translation>
</message>
<message>
<location line="+32"/>
<source>&Open...</source>
<translation>打开(&O)...</translation>
</message>
<message>
<location line="-36"/>
<source>C&reate</source>
<translation>创建(&R)</translation>
</message>
<message>
<location line="+33"/>
<source>&Close</source>
<translation>关闭(&C)</translation>
</message>
<message>
<location line="-34"/>
<source>Show this Dialog on Startup</source>
<translation>启动时显示这个对话框</translation>
</message>
<message>
<location line="+2"/>
<source>Recent</source>
<translation>最近的</translation>
</message>
<message>
<location line="+39"/>
<source>&Recent Forms</source>
<translation>最近的窗体(&R)</translation>
</message>
<message>
<location line="+64"/>
<source>Read error</source>
<translation>读取错误</translation>
</message>
<message>
<source>Widgets</source>
<translation type="obsolete">窗口部件</translation>
</message>
<message>
<source>Custom Widgets</source>
<translation type="obsolete">自定义窗口部件</translation>
</message>
<message>
<location line="+23"/>
<source>A temporary form file could not be created in %1.</source>
<translation>无法在 %1 中创建临时窗体文件。</translation>
</message>
<message>
<location line="+6"/>
<source>The temporary form file %1 could not be written.</source>
<translation>无法写入临时窗体文件 %1。</translation>
</message>
</context>
<context>
<name>NewFormWidget</name>
<message>
<location filename="../tools/designer/src/lib/shared/newformwidget.cpp" line="+495"/>
<source>Unable to open the form template file '%1': %2</source>
<translation>无法打开窗体模版文件'%1'：%2</translation>
</message>
</context>
<context>
<name>ObjectInspectorModel</name>
<message>
<location filename="../tools/designer/src/components/objectinspector/objectinspectormodel.cpp" line="+364"/>
<source>Object</source>
<translation>对象</translation>
</message>
<message>
<location line="+1"/>
<source>Class</source>
<translation>类</translation>
</message>
<message>
<location line="+35"/>
<source>separator</source>
<translation>分隔符</translation>
</message>
<message>
<location line="+98"/>
<source><noname></source>
<translation><无名称></translation>
</message>
</context>
<context>
<name>ObjectNameDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_taskmenu.cpp" line="+162"/>
<source>Change Object Name</source>
<translation>改变对象名称</translation>
</message>
<message>
<location line="+4"/>
<source>Object Name</source>
<translation>对象名称</translation>
</message>
</context>
<context>
<name>Oubliette</name>
<message>
<source>Inventory</source>
<translation type="obsolete">详细目录</translation>
</message>
<message>
<source>You have <B>No</B> Items</source>
<translation type="obsolete">您<B>没有</b>项</translation>
</message>
<message numerus="yes">
<source>You have %1 of %2 items</source>
<translation type="obsolete">
<numerusform>您拥有 %2 项中的 %1</numerusform>
</translation>
</message>
<message>
<source>OK</source>
<translation type="obsolete">确定</translation>
</message>
<message>
<source>Easter Egg Found</source>
<translation type="obsolete">找到了复活节彩蛋</translation>
</message>
<message>
<source>Welcome to the Trolltech Business Card Hunt
Use the direction keys to move around and find the business cards for all the trolls.</source>
<translation type="obsolete">欢迎来到 Trolltech 名片搜索游戏。
请使用方向键进行移动并且找到所有 Troll 的名片。</translation>
</message>
<message>
<source>You Did It!</source>
<translation type="obsolete">您做到了！</translation>
</message>
<message>
<source>That's rather anti-climatic</source>
<translation type="obsolete">这真的有点反常</translation>
</message>
<message>
<source>Quit</source>
<translation type="obsolete">退出</translation>
</message>
<message numerus="yes">
<source>You've collected all the Trolltech cards. It took you %n steps.
There's nothing more here. You should get back to work.</source>
<translation type="obsolete">
<numerusform>您已经收集了所有的 Trolltech 名片。您一共用了 %n 步。
没有其它的了。您应该回去接着工作了。</numerusform>
</translation>
</message>
</context>
<context>
<name>PluginDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/plugindialog.ui"/>
<source>Plugin Information</source>
<translation type="unfinished">插件信息</translation>
</message>
<message>
<location/>
<source>1</source>
<translation type="unfinished">1</translation>
</message>
</context>
<context>
<name>PreferencesDialog</name>
<message>
<location filename="../tools/designer/src/designer/preferencesdialog.ui"/>
<source>Preferences</source>
<translation>属性</translation>
</message>
<message>
<source>Toolwindow Font</source>
<translation type="obsolete">工具窗口字体</translation>
</message>
<message>
<source>Default Grid</source>
<translation type="obsolete">默认栅格</translation>
</message>
<message>
<source>User Interface Mode</source>
<translation type="obsolete">用户界面模式</translation>
</message>
<message>
<source>Docked Window</source>
<translation type="obsolete">锚接的窗口</translation>
</message>
<message>
<source>Multiple Top-Level Windows</source>
<translation type="obsolete">多个顶级窗口</translation>
</message>
<message>
<source>Additional Template Paths</source>
<translation type="obsolete">添加模板路径</translation>
</message>
<message>
<source>Pick a directory to save templates in</source>
<translation type="obsolete">选择一个用于保存模板的目录</translation>
</message>
<message>
<source>...</source>
<translation type="obsolete">...</translation>
</message>
</context>
<context>
<name>PreviewConfigurationWidget</name>
<message>
<location filename="../tools/designer/src/lib/shared/previewconfigurationwidget.cpp" line="+155"/>
<source>Default</source>
<translation>默认</translation>
</message>
<message>
<location line="+22"/>
<source>None</source>
<translation>无</translation>
</message>
<message>
<location line="+6"/>
<source>Browse...</source>
<translation>浏览...</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/previewconfigurationwidget.ui"/>
<source>Form</source>
<translation>窗体</translation>
</message>
<message>
<location/>
<source>Print/Preview Configuration</source>
<translation>打印/预览配置</translation>
</message>
<message>
<location/>
<source>Style</source>
<translation>风格</translation>
</message>
<message>
<location/>
<source>Style sheet</source>
<translation>样式表</translation>
</message>
<message>
<location/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location/>
<source>Device skin</source>
<translation>设备皮肤</translation>
</message>
</context>
<context>
<name>PromotionModel</name>
<message>
<location filename="../tools/designer/src/lib/shared/promotionmodel.cpp" line="+116"/>
<source>Not used</source>
<extracomment>Usage of promoted widgets</extracomment>
<translation>没有被使用</translation>
</message>
</context>
<context>
<name>PropertyEditor</name>
<message>
<source>comment</source>
<translation type="obsolete">注释</translation>
</message>
</context>
<context>
<name>Q3WizardContainer</name>
<message>
<location filename="../tools/designer/src/plugins/widgets/q3wizard/q3wizard_container.cpp" line="+172"/>
<location line="+5"/>
<source>Page</source>
<translation>页</translation>
</message>
</context>
<context>
<name>QAbstractFormBuilder</name>
<message>
<location filename="../tools/designer/src/lib/uilib/abstractformbuilder.cpp" line="+206"/>
<source>Unexpected element <%1></source>
<translation>未预期的元素<%1></translation>
</message>
<message>
<location line="+5"/>
<source>An error has occurred while reading the ui file at line %1, column %2: %3</source>
<translation>读取ui文件时发生错误，行%1，列%2：%3</translation>
</message>
<message>
<location line="+6"/>
<source>Invalid ui file: The root element <ui> is missing.</source>
<translation>无效ui文件：缺少根元素<ui></translation>
</message>
<message>
<location line="+119"/>
<source>The creation of a widget of the class '%1' failed.</source>
<translation>创建类“%1”的窗口部件失败。</translation>
</message>
<message>
<location line="+295"/>
<source>Attempt to add child that is not of class QWizardPage to QWizard.</source>
<translation>试图把一个并不是 QWizardPage 类的对象添加为 QWizard 的子对象。</translation>
</message>
<message>
<location line="+86"/>
<source>Attempt to add a layout to a widget '%1' (%2) which already has a layout of non-box type %3.
This indicates an inconsistency in the ui-file.</source>
<translation>试图向一个已经包含了类型为 %3 的非框布局的窗口部件“%1”（%2）添加布局。
这表明这个ui文件中有矛盾。</translation>
</message>
<message>
<location line="+144"/>
<source>Empty widget item in %1 '%2'.</source>
<translation>在 %1 “%2”中的空窗口部件项。</translation>
</message>
<message>
<location line="+684"/>
<source>Flags property are not supported yet.</source>
<translation>标记属性还不被支持。</translation>
</message>
<message>
<location line="+81"/>
<source>While applying tab stops: The widget '%1' could not be found.</source>
<translation>在应用制表符时中断：无法找到窗口部件“%1”。</translation>
</message>
<message>
<location line="+749"/>
<source>Invalid QButtonGroup reference '%1' referenced by '%2'.</source>
<translation>“%2”参考了无效的QButtonGroup参考“%1”。</translation>
</message>
<message>
<location line="+518"/>
<source>This version of the uitools library is linked without script support.</source>
<translation>这个版本的uitools库没有被链接脚本支持。</translation>
</message>
</context>
<context>
<name>QActiveXPlugin</name>
<message>
<source>ActiveX control</source>
<translation type="obsolete">ActiveX 控件</translation>
</message>
<message>
<source>ActiveX control widget</source>
<translation type="obsolete">ActiveX 控件窗口部件</translation>
</message>
</context>
<context>
<name>QActiveXPluginObject</name>
<message>
<source>Control loaded</source>
<translation type="obsolete">控件已经加载</translation>
</message>
</context>
<context>
<name>QActiveXTaskMenu</name>
<message>
<source>Set Control</source>
<translation type="obsolete">设定控件</translation>
</message>
<message>
<source>Licensed Control</source>
<translation type="obsolete">许可的控件</translation>
</message>
<message>
<source>The control requires a design-time license</source>
<translation type="obsolete">这个控件需要一个设计时的许可</translation>
</message>
</context>
<context>
<name>QAxWidgetPlugin</name>
<message>
<location filename="../tools/designer/src/plugins/activeqt/qaxwidgetplugin.cpp" line="+75"/>
<source>ActiveX control</source>
<translation>ActiveX 控件</translation>
</message>
<message>
<location line="+5"/>
<source>ActiveX control widget</source>
<translation>ActiveX 控件窗口部件</translation>
</message>
</context>
<context>
<name>QAxWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/plugins/activeqt/qaxwidgettaskmenu.cpp" line="+119"/>
<source>Set Control</source>
<translation>设置控件</translation>
</message>
<message>
<location line="+1"/>
<source>Reset Control</source>
<translation>重置控件</translation>
</message>
<message>
<location line="+41"/>
<source>Licensed Control</source>
<translation>许可的控件</translation>
</message>
<message>
<location line="+1"/>
<source>The control requires a design-time license</source>
<translation>这个控件需要一个设计时的许可</translation>
</message>
</context>
<context>
<name>QCoreApplication</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_promotion.cpp" line="+83"/>
<source>%1 is not a promoted class.</source>
<translation>%1 不是提升的类。</translation>
</message>
<message>
<location line="+65"/>
<source>The base class %1 is invalid.</source>
<translation>基类 %1 无效。</translation>
</message>
<message>
<location line="+7"/>
<source>The class %1 already exists.</source>
<translation>类 %1 已经存在。</translation>
</message>
<message>
<location line="+9"/>
<source>Promoted Widgets</source>
<translation>提升的窗口部件</translation>
</message>
<message>
<location line="+126"/>
<source>The class %1 cannot be removed</source>
<translation>类 %1 不能被移除</translation>
</message>
<message>
<location line="+9"/>
<source>The class %1 cannot be removed because it is still referenced.</source>
<translation>类 %1 不能被移除，因为它还在被引用。</translation>
</message>
<message>
<location line="+10"/>
<source>The class %1 cannot be renamed</source>
<translation>类 %1不能被重命名</translation>
</message>
<message>
<location line="+7"/>
<source>The class %1 cannot be renamed to an empty name.</source>
<translation>类 %1 不能被重命名为一个空白名称。</translation>
</message>
<message>
<location line="+5"/>
<source>There is already a class named %1.</source>
<translation>已经存在一个名称为 %1 的类。</translation>
</message>
<message>
<location line="+29"/>
<source>Cannot set an empty include file.</source>
<translation>无法设定一个空白包含文件。</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/uilib/formscriptrunner.cpp" line="+88"/>
<source>Exception at line %1: %2</source>
<translation>%1 行发生意外：%2</translation>
</message>
<message>
<location line="+36"/>
<source>Unknown error</source>
<translation>未知错误</translation>
</message>
<message>
<location line="+50"/>
<source>An error occurred while running the script for %1: %2
Script: %3</source>
<translation>在为了 %1 运行脚本时发生一个错误：%2
脚本：%3</translation>
</message>
</context>
<context>
<name>QDesigner</name>
<message>
<location filename="../tools/designer/src/designer/qdesigner.cpp" line="+141"/>
<source>%1 - warning</source>
<translation>%1 - 警告</translation>
</message>
<message>
<location line="+96"/>
<source>Qt Designer</source>
<translation>Qt 设计师</translation>
</message>
<message>
<location line="+1"/>
<source>This application cannot be used for the Console edition of Qt</source>
<translation>这个应用程序不可以和 Qt 的控制台版本一起使用</translation>
</message>
</context>
<context>
<name>QDesignerActionEditor</name>
<message>
<source>Action Editor</source>
<translation type="obsolete">动作编辑器</translation>
</message>
</context>
<context>
<name>QDesignerActions</name>
<message>
<source>CTRL+N</source>
<translation type="obsolete">CTRL+N</translation>
</message>
<message>
<source>CTRL+O</source>
<translation type="obsolete">CTRL+O</translation>
</message>
<message>
<location filename="../tools/designer/src/designer/qdesigner_actions.cpp" line="+488"/>
<source>Clear &Menu</source>
<translation>清空菜单(&M)</translation>
</message>
<message>
<source>CTRL+S</source>
<translation type="obsolete">CTRL+S</translation>
</message>
<message>
<source>CTRL+W</source>
<translation type="obsolete">CTRL+W</translation>
</message>
<message>
<location line="-300"/>
<source>&Quit</source>
<translation>退出(&Q)</translation>
</message>
<message>
<location line="+95"/>
<source>CTRL+Q</source>
<translation>CTRL+Q</translation>
</message>
<message>
<source>CTRL+Z</source>
<translation type="obsolete">CTRL+Z</translation>
</message>
<message>
<source>CTRL+SHIFT+Z</source>
<translation type="obsolete">CTRL+SHIFT+Z</translation>
</message>
<message>
<location line="-105"/>
<source>Edit Widgets</source>
<translation>编辑窗口部件</translation>
</message>
<message>
<location line="+190"/>
<source>CTRL+R</source>
<translation>CTRL+R</translation>
</message>
<message>
<source>Form &Settings...</source>
<translation type="obsolete">窗体设定(&S)...</translation>
</message>
<message>
<location line="-177"/>
<source>&Minimize</source>
<translation>最小化(&M)</translation>
</message>
<message>
<location line="+195"/>
<source>CTRL+M</source>
<translation>CTRL+M</translation>
</message>
<message>
<location line="-193"/>
<source>Bring All to Front</source>
<translation>全部放到前面</translation>
</message>
<message>
<location line="+3"/>
<source>Additional Fonts...</source>
<translation>附加字体...</translation>
</message>
<message>
<location line="+221"/>
<source>Qt Designer &Help</source>
<translation>Qt 设计师帮助(&H)</translation>
</message>
<message>
<location line="+7"/>
<source>Current Widget Help</source>
<translation>自定义窗口部件帮助</translation>
</message>
<message>
<location line="+7"/>
<source>What's New in Qt Designer?</source>
<translation>Qt 设计师有什么新变化？</translation>
</message>
<message>
<location line="+7"/>
<source>About Plugins</source>
<translation>关于插件</translation>
</message>
<message>
<location line="+6"/>
<location line="+601"/>
<source>About Qt Designer</source>
<translation>关于 Qt 设计师</translation>
</message>
<message>
<location line="-595"/>
<source>About Qt</source>
<translation>关于 Qt</translation>
</message>
<message>
<location line="+44"/>
<source>&Recent Forms</source>
<translation>最近的窗体(&R)</translation>
</message>
<message>
<location line="+77"/>
<location line="+197"/>
<source>Open Form</source>
<translation>打开窗体</translation>
</message>
<message>
<location line="-72"/>
<source>Designer</source>
<translation>设计师</translation>
</message>
<message>
<location line="+0"/>
<source>Feature not implemented yet!</source>
<translation>特性还没有实现！</translation>
</message>
<message>
<location line="+141"/>
<location line="+40"/>
<source>Save Form?</source>
<translation>保存窗体？</translation>
</message>
<message>
<location line="-35"/>
<source>The file %1 could not be opened.
Reason: %2
Would you like to retry or select a different file?</source>
<translation>文件%1无法被打开。
原因：%2
您要再次尝试，还是选择其它文件？</translation>
</message>
<message>
<location line="+6"/>
<source>Select New File</source>
<translation>选择新文件</translation>
</message>
<message>
<location line="-694"/>
<source>%1 already exists.
Do you want to replace it?</source>
<translation>%1 已经存在。
您想要替换它么？</translation>
</message>
<message>
<location line="+925"/>
<source>&Close Preview</source>
<translation>关闭预览(&C)</translation>
</message>
<message>
<location line="-884"/>
<source>Preferences...</source>
<translation>属性...</translation>
</message>
<message>
<location line="+61"/>
<source>CTRL+SHIFT+S</source>
<translation>CTRL+SHIFT+S</translation>
</message>
<message>
<location line="+316"/>
<location line="+37"/>
<location line="+160"/>
<source>Designer UI files (*.%1);;All Files (*)</source>
<translation>设计师 UI 文件 (*.%1);;全部文件 (*)</translation>
</message>
<message>
<location line="-641"/>
<source>Saved %1.</source>
<translation>%1 已被保存。</translation>
</message>
<message>
<location line="+627"/>
<source>Read error</source>
<translation>读取错误</translation>
</message>
<message>
<location line="+1"/>
<source>%1
Do you want to update the file location or generate a new form?</source>
<translation>%1
您想要更新这个文件定位或者生成一个新的窗体么？</translation>
</message>
<message>
<location line="+3"/>
<source>&Update</source>
<translation>更新(&U)</translation>
</message>
<message>
<location line="+1"/>
<source>&New Form</source>
<translation>新建窗体(&N)</translation>
</message>
<message>
<location line="+78"/>
<source>Could not open file</source>
<translation>无法打开文件</translation>
</message>
<message>
<source>The file, %1, could not be opened
Reason: %2
Would you like to retry or change your file?</source>
<translation type="obsolete">无法打开文件 %1
原因：%2
您想要再次尝试或者改变您的文件么？</translation>
</message>
<message>
<location line="+40"/>
<source>Could not write file</source>
<translation>无法写文件</translation>
</message>
<message>
<source>It was not possible to write the entire file, %1, to disk.
Reason:%2
Would you like to retry?</source>
<translation type="obsolete">无法把 %1整个文件写入磁盘。
原因：%2
您想要再次尝试么？</translation>
</message>
<message>
<source>Form Settings - %1</source>
<translation type="obsolete">窗体设定 - %1</translation>
</message>
<message>
<location line="-699"/>
<source>&New...</source>
<translation>新建(&N)...</translation>
</message>
<message>
<location line="+1"/>
<source>&Open...</source>
<translation>打开(&O)...</translation>
</message>
<message>
<location line="+1"/>
<source>&Save</source>
<translation>保存(&S)</translation>
</message>
<message>
<location line="+1"/>
<source>Save &As...</source>
<translation>另存为(&A)...</translation>
</message>
<message>
<location line="+1"/>
<source>Save A&ll</source>
<translation>保存全部(&L)</translation>
</message>
<message>
<location line="+1"/>
<source>Save As &Template...</source>
<translation>另存为模板(&T)...</translation>
</message>
<message>
<location line="+1"/>
<location line="+896"/>
<source>&Close</source>
<translation>关闭(&C)</translation>
</message>
<message>
<location line="-895"/>
<source>Save &Image...</source>
<translation>保存图像(&I)...</translation>
</message>
<message>
<location line="+1"/>
<source>&Print...</source>
<translation>打印(&P)...</translation>
</message>
<message>
<source>&Preview...</source>
<translation type="obsolete">预览(&P)...</translation>
</message>
<message>
<location line="+3"/>
<source>View &Code...</source>
<translation>查看代码(&C)...</translation>
</message>
<message>
<location line="+64"/>
<source>ALT+CTRL+S</source>
<translation>ALT+CTRL+S</translation>
</message>
<message>
<location line="+355"/>
<location line="+248"/>
<source>Save Form As</source>
<translation>窗体另存为</translation>
</message>
<message>
<location line="+429"/>
<source>Preview failed</source>
<translation>预览失败</translation>
</message>
<message>
<location line="-575"/>
<source>Code generation failed</source>
<translation>代码生成失败</translation>
</message>
<message>
<location line="+170"/>
<source>It was not possible to write the entire file %1 to disk.
Reason:%2
Would you like to retry?</source>
<translation>无法将整个文件%1写入磁盘。
原因：%2
您要重试么？</translation>
</message>
<message>
<location line="+158"/>
<location line="+34"/>
<source>Assistant</source>
<translation>助手</translation>
</message>
<message>
<location line="+47"/>
<location line="+23"/>
<source>The backup file %1 could not be written.</source>
<translation>备份文件%1无法被写入。</translation>
</message>
<message>
<location line="+107"/>
<source>The backup directory %1 could not be created.</source>
<translation>无法创建备份目录%1。</translation>
</message>
<message>
<location line="+6"/>
<source>The temporary backup directory %1 could not be created.</source>
<translation>无法创建临时备份目录%1。</translation>
</message>
<message>
<location line="+54"/>
<source>Image files (*.%1)</source>
<translation>图像文件 (*.%1)</translation>
</message>
<message>
<location line="+9"/>
<location line="+17"/>
<source>Save Image</source>
<translation>保存图像</translation>
</message>
<message>
<location line="-4"/>
<source>Saved image %1.</source>
<translation>图像 %1 已被保存。</translation>
</message>
<message>
<location line="+5"/>
<source>The file %1 could not be written.</source>
<translation>无法写入文件 %1。</translation>
</message>
<message>
<location line="+13"/>
<source>Please close all forms to enable the loading of additional fonts.</source>
<translation>请关闭所有窗体文件，以便加载附加字体</translation>
</message>
<message>
<location line="+52"/>
<source>Printed %1.</source>
<translation>%1 已被打印。</translation>
</message>
</context>
<context>
<name>QDesignerAppearanceOptionsPage</name>
<message>
<location filename="../tools/designer/src/designer/qdesigner_appearanceoptions.cpp" line="+138"/>
<source>Appearance</source>
<extracomment>Tab in preferences dialog</extracomment>
<translation>外观</translation>
</message>
</context>
<context>
<name>QDesignerAppearanceOptionsWidget</name>
<message>
<location line="-53"/>
<source>Docked Window</source>
<translation>锚接的窗口</translation>
</message>
<message>
<location line="+1"/>
<source>Multiple Top-Level Windows</source>
<translation>多个顶级窗口</translation>
</message>
<message>
<location line="+5"/>
<source>Toolwindow Font</source>
<translation>工具窗口字体</translation>
</message>
</context>
<context>
<name>QDesignerAxWidget</name>
<message>
<location filename="../tools/designer/src/plugins/activeqt/qaxwidgettaskmenu.cpp" line="-71"/>
<source>Reset control</source>
<translation>重置控件</translation>
</message>
<message>
<location line="+2"/>
<source>Set control</source>
<translation>设置控件</translation>
</message>
<message>
<location filename="../tools/designer/src/plugins/activeqt/qdesigneraxwidget.cpp" line="+179"/>
<source>Control loaded</source>
<translation>控件已经加载</translation>
</message>
<message>
<location line="+40"/>
<source>A COM exception occurred when executing a meta call of type %1, index %2 of "%3".</source>
<translation>执行类型%1的meta呼叫时发生COM例外，索引为%2/%3。</translation>
</message>
</context>
<context>
<name>QDesignerFormBuilder</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_formbuilder.cpp" line="+88"/>
<source>Script errors occurred:</source>
<translation>发生脚本错误：</translation>
</message>
<message>
<location line="+304"/>
<source>The preview failed to build.</source>
<translation>构建预览失败。</translation>
</message>
<message>
<location line="+63"/>
<source>Designer</source>
<translation>设计师</translation>
</message>
</context>
<context>
<name>QDesignerFormWindow</name>
<message>
<location filename="../tools/designer/src/designer/qdesigner_formwindow.cpp" line="+217"/>
<source>%1 - %2[*]</source>
<translation>%1 - %2[*]</translation>
</message>
<message>
<location line="+10"/>
<source>Save Form?</source>
<translation>保存窗体？</translation>
</message>
<message>
<location line="+1"/>
<source>Do you want to save the changes to this document before closing?</source>
<translation>您想要在关闭之前保存对这个文档所做的改变么？</translation>
</message>
<message>
<location line="+2"/>
<source>If you don't save, your changes will be lost.</source>
<translation>如果您不保存，您的这些改变将会丢失。</translation>
</message>
</context>
<context>
<name>QDesignerMenu</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_menu.cpp" line="-1160"/>
<source>Type Here</source>
<translation>在这里输入</translation>
</message>
<message>
<location line="+3"/>
<source>Add Separator</source>
<translation>添加分隔符</translation>
</message>
<message>
<location line="+379"/>
<source>Remove action '%1'</source>
<translation>移除动作“%1”</translation>
</message>
<message>
<location line="+327"/>
<source>Insert action</source>
<translation>插入动作</translation>
</message>
<message>
<location line="-302"/>
<location line="+628"/>
<source>Add separator</source>
<translation>添加分隔符</translation>
</message>
<message>
<location line="-660"/>
<source>Insert separator</source>
<translation>插入分隔符</translation>
</message>
<message>
<location line="+5"/>
<source>Remove separator</source>
<translation>移除分隔符</translation>
</message>
</context>
<context>
<name>QDesignerMenuBar</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_menubar.cpp" line="-381"/>
<source>Type Here</source>
<translation>在这里输入</translation>
</message>
<message>
<location line="+304"/>
<source>Remove Menu '%1'</source>
<translation>移除菜单“%1”</translation>
</message>
<message>
<location line="+12"/>
<source>Remove Menu Bar</source>
<translation>移除菜单栏</translation>
</message>
<message>
<location line="+70"/>
<source>Menu</source>
<translation>菜单</translation>
</message>
</context>
<context>
<name>QDesignerObjectInspector</name>
<message>
<source>Object Inspector</source>
<translation type="obsolete">对象查看器</translation>
</message>
</context>
<context>
<name>QDesignerPluginManager</name>
<message>
<location filename="../tools/designer/src/lib/shared/pluginmanager.cpp" line="+249"/>
<source>An XML error was encountered when parsing the XML of the custom widget %1: %2</source>
<translation>在解析自定义窗口部件%1的XML时发生错误：%2</translation>
</message>
<message>
<location line="+27"/>
<source>The XML of the custom widget %1 does not contain any of the elements <widget> or <ui>.</source>
<translation>自定义窗口部件%1的XML未包含任何<widget>或者<ui>元素。</translation>
</message>
<message>
<location line="+12"/>
<source>The class attribute for the class %1 is missing.</source>
<translation>类%1缺少了类属性。</translation>
</message>
<message>
<location line="+4"/>
<source>The class attribute for the class %1 does not match the class name %2.</source>
<translation>类%1的类属性和类名称%2不匹配。</translation>
</message>
</context>
<context>
<name>QDesignerPropertyEditor</name>
<message>
<source>Property Editor</source>
<translation type="obsolete">属性编辑器</translation>
</message>
<message>
<source>Ctrl+I</source>
<translation type="obsolete">Ctrl+I</translation>
</message>
</context>
<context>
<name>QDesignerPropertySheet</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_propertysheet.cpp" line="+747"/>
<source>Dynamic Properties</source>
<translation>动态属性</translation>
</message>
</context>
<context>
<name>QDesignerResource</name>
<message>
<location filename="../tools/designer/src/components/formeditor/qdesigner_resource.cpp" line="+512"/>
<source>The layout type '%1' is not supported, defaulting to grid.</source>
<translation>不支持布局类型“%1”，默认为网格。</translation>
</message>
<message>
<location line="+342"/>
<source>The container extension of the widget '%1' (%2) returned a widget not managed by Designer '%3' (%4) when queried for page #%5.
Container pages should only be added by specifying them in XML returned by the domXml() method of the custom widget.</source>
<translation>在查询页面#%5时，窗口部件“%1”(%2)的容器扩展返回了一个没有被设计师管理的窗口部件。
容器页面应该只能由自定义窗口部件的domXml()方法传回的XML指定。</translation>
</message>
<message>
<location line="+599"/>
<source>Unexpected element <%1></source>
<extracomment>Parsing clipboard contents</extracomment>
<translation>未预期的元素<%1></translation>
</message>
<message>
<location line="+6"/>
<source>Error while pasting clipboard contents at line %1, column %2: %3</source>
<extracomment>Parsing clipboard contents</extracomment>
<translation>粘贴剪贴板内容时发生错误，行%1，列%2：%3</translation>
</message>
<message>
<location line="+6"/>
<source>Error while pasting clipboard contents: The root element <ui> is missing.</source>
<extracomment>Parsing clipboard contents</extracomment>
<translation>粘贴剪贴板内容时发生错误：没有根元素<ui>。</translation>
</message>
</context>
<context>
<name>QDesignerResourceEditor</name>
<message>
<source>Resource Browser</source>
<translation type="obsolete">资源浏览器</translation>
</message>
</context>
<context>
<name>QDesignerSharedSettings</name>
<message>
<location filename="../tools/designer/src/lib/shared/shared_settings.cpp" line="+83"/>
<source>The template path %1 could not be created.</source>
<translation>无法创建临时路径 %1。</translation>
</message>
<message>
<location line="+184"/>
<source>An error has been encountered while parsing device profile XML: %1</source>
<translation>解析设备描述文件XML出错：%1</translation>
</message>
</context>
<context>
<name>QDesignerSignalSlotEditor</name>
<message>
<source>Signal/Slot Editor</source>
<translation type="obsolete">信号/槽编辑器</translation>
</message>
</context>
<context>
<name>QDesignerToolWindow</name>
<message>
<location filename="../tools/designer/src/designer/qdesigner_toolwindow.cpp" line="+190"/>
<source>Property Editor</source>
<translation>属性编辑器</translation>
</message>
<message>
<location line="+54"/>
<source>Action Editor</source>
<translation>动作编辑器</translation>
</message>
<message>
<location line="+42"/>
<source>Object Inspector</source>
<translation>对象查看器</translation>
</message>
<message>
<location line="+35"/>
<source>Resource Browser</source>
<translation>资源浏览器</translation>
</message>
<message>
<location line="+34"/>
<source>Signal/Slot Editor</source>
<translation>信号/槽编辑器</translation>
</message>
<message>
<location line="+41"/>
<source>Widget Box</source>
<translation>窗口部件盒</translation>
</message>
</context>
<context>
<name>QDesignerWidgetBox</name>
<message>
<source>Widget Box</source>
<translation type="obsolete">窗口部件盒</translation>
</message>
<message>
<location filename="../tools/designer/src/components/widgetbox/widgetboxtreewidget.cpp" line="+349"/>
<source>An error has been encountered at line %1 of %2: %3</source>
<translation>在%2的第%1行发生错误：%3</translation>
</message>
<message>
<location line="+139"/>
<source>Unexpected element <%1> encountered when parsing for <widget> or <ui></source>
<translation>解析<widget>或<ui>时遇到未预期的元素<%1></translation>
</message>
<message>
<location line="+19"/>
<source>Unexpected end of file encountered when parsing widgets.</source>
<translation>解析窗口部件时遇到未预期的文件结束。</translation>
</message>
<message>
<location line="+9"/>
<source>A widget element could not be found.</source>
<translation>无法找到一个窗口部件的元素。</translation>
</message>
</context>
<context>
<name>QDesignerWorkbench</name>
<message>
<location filename="../tools/designer/src/designer/qdesigner_workbench.cpp" line="+199"/>
<source>&File</source>
<translation>文件(&F)</translation>
</message>
<message>
<source>&Recent Forms</source>
<translation type="obsolete">最近的窗体(&R)</translation>
</message>
<message>
<source>&Edit</source>
<translation type="obsolete">编辑(&E)</translation>
</message>
<message>
<location line="+6"/>
<source>F&orm</source>
<translation>窗体(&O)</translation>
</message>
<message>
<location line="+1"/>
<source>Preview in</source>
<translation>预览于</translation>
</message>
<message>
<location line="+4"/>
<source>&View</source>
<translation>视图(&V)</translation>
</message>
<message>
<location line="+2"/>
<source>&Settings</source>
<translation>设置(&S)</translation>
</message>
<message>
<location line="+594"/>
<source>The last session of Designer was not terminated correctly. Backup files were left behind. Do you want to load them?</source>
<translation>设计师的上一个会话没有正常退出，并留下备份文件，您想加载它们吗？</translation>
</message>
<message>
<source>&Tools</source>
<translation type="obsolete">工具(&T)</translation>
</message>
<message>
<location line="-592"/>
<source>&Window</source>
<translation>窗口(&W)</translation>
</message>
<message>
<location line="+2"/>
<source>&Help</source>
<translation>帮助(&H)</translation>
</message>
<message>
<location line="-15"/>
<source>Edit</source>
<translation>编辑</translation>
</message>
<message>
<source>Tools</source>
<translation type="obsolete">工具</translation>
</message>
<message>
<source>Form</source>
<translation type="obsolete">窗体</translation>
</message>
<message>
<location line="+38"/>
<source>Toolbars</source>
<translation>工具栏</translation>
</message>
<message>
<source>Widget Box</source>
<translation type="obsolete">窗口部件盒</translation>
</message>
<message>
<source>Qt Designer</source>
<translation type="obsolete">Qt 设计师</translation>
</message>
<message>
<location line="+464"/>
<source>Save Forms?</source>
<translation>保存窗体？</translation>
</message>
<message>
<location line="+4"/>
<source>If you do not review your documents, all your changes will be lost.</source>
<translation>如果您不复审您的文档，所有的修改将丢失。</translation>
</message>
<message>
<location line="+3"/>
<source>Review Changes</source>
<translation>评审变化</translation>
</message>
<message>
<location line="-2"/>
<source>Discard Changes</source>
<translation>抛弃变化</translation>
</message>
<message>
<source>If you don't review your documents, all your changes will be lost.</source>
<translation type="obsolete">如果您不评审您的文档，所有您做的改变都会丢失。</translation>
</message>
<message>
<location line="+97"/>
<source>Backup Information</source>
<translation>备份信息</translation>
</message>
<message>
<source>Designer was not correctly terminated during your last session.There are existing Backup files, do you want to load them?</source>
<translation type="obsolete">设计师在您上一次对话中没有正常终止。还有一些备份文件存在，您想要加载它们么？</translation>
</message>
<message>
<location line="+112"/>
<source>The file <b>%1</b> could not be opened.</source>
<translation>无法打开文件 <b>%1</b>。</translation>
</message>
<message>
<location line="+46"/>
<source>The file <b>%1</b> is not a valid Designer ui file.</source>
<translation>文件 <b>%1</b> 不是有效的设计师界面文件。</translation>
</message>
<message>
<source>File</source>
<translation type="obsolete">文件</translation>
</message>
<message numerus="yes">
<location line="-259"/>
<source>There are %n forms with unsaved changes. Do you want to review these changes before quitting?</source>
<translation>
<numerusform>还有 %n 个窗体没有保存变化。您想要在退出之前评审这些变化么？</numerusform>
</translation>
</message>
<message>
<source>Configure Toolbars...</source>
<translation type="obsolete">配置工具栏...</translation>
</message>
<message>
<source>Window</source>
<translation type="obsolete">窗口</translation>
</message>
<message>
<source>Help</source>
<translation type="obsolete">帮助</translation>
</message>
<message>
<source>Style</source>
<translation type="obsolete">风格</translation>
</message>
<message>
<source>Dock views</source>
<translation type="obsolete">锚接视图</translation>
</message>
</context>
<context>
<name>QFormBuilder</name>
<message>
<location filename="../tools/designer/src/lib/uilib/formbuilder.cpp" line="+160"/>
<source>An empty class name was passed on to %1 (object name: '%2').</source>
<extracomment>Empty class name passed to widget factory method</extracomment>
<translation>一个空白的类名称被传送到%1(对象名称：%2)。</translation>
</message>
<message>
<location line="+56"/>
<source>QFormBuilder was unable to create a custom widget of the class '%1'; defaulting to base class '%2'.</source>
<translation>QFormBuilder 无法创建基于类“%1”的自定义窗口部件；默认基类为“%2”。</translation>
</message>
<message>
<location line="+6"/>
<source>QFormBuilder was unable to create a widget of the class '%1'.</source>
<translation>QFormBuilder 不能创建类“%1”的一个窗口部件。</translation>
</message>
<message>
<location line="+64"/>
<source>The layout type `%1' is not supported.</source>
<translation>布局类型“%1”不被支持。</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/uilib/properties.cpp" line="+106"/>
<source>The set-type property %1 could not be read.</source>
<translation>无法读取集类型属性 %1。</translation>
</message>
<message>
<location line="+23"/>
<source>The enumeration-type property %1 could not be read.</source>
<translation>无法读取枚举类型属性 %1。</translation>
</message>
<message>
<location line="+190"/>
<source>Reading properties of the type %1 is not supported yet.</source>
<translation>还不支持读取类型 %1 的属性。</translation>
</message>
<message>
<location line="+266"/>
<source>The property %1 could not be written. The type %2 is not supported yet.</source>
<translation>属性 %1 无法被写入。还不支持类型 %2。</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/uilib/properties_p.h" line="+132"/>
<source>The enumeration-value '%1' is invalid. The default value '%2' will be used instead.</source>
<translation>枚举变量值“%1”是无效的。默认值“%2”将会被用来替代。</translation>
</message>
<message>
<location line="+14"/>
<source>The flag-value '%1' is invalid. Zero will be used instead.</source>
<translation>标记值“%1”是无效的。零将会被用来替代。</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<source>A parse error occurred at line %1, column %2 of the XML code specified for the widget %3: %4
%5</source>
<translation type="obsolete">在解析由规定窗口部件 %3 的 XML 代码的 %1 行、%2列时发生一个解析错误：%4
%5</translation>
</message>
<message>
<source>The XML code specified for the widget %1 contains an invalid root element %2.
%3</source>
<translation type="obsolete">规定窗口部件 %1 的 XML 代码包含了一个无效的根元素：%2。
%3</translation>
</message>
<message>
<source>%1 - warning</source>
<translation type="obsolete">%1 - 警告</translation>
</message>
<message>
<source>The backup file %1 could not be written.</source>
<translation type="obsolete">无法写备份文件 %1。</translation>
</message>
<message>
<source>The backup directory %1 could not be created.</source>
<translation type="obsolete">无法创建备份目录 %1。</translation>
</message>
<message>
<source>The temporary backup directory %1 could not be created.</source>
<translation type="obsolete">无法创建临时备份目录 %1。</translation>
</message>
<message>
<source>The template path %1 could not be created.</source>
<translation type="obsolete">无法创建临时路径 %1。</translation>
</message>
<message>
<source>Script errors occurred:</source>
<translation type="obsolete">脚本发生错误：</translation>
</message>
<message>
<source>An error occurred while running the scripts for "%1":
</source>
<translation type="obsolete">在运行“%1”的脚本过程中发生一个错误：
</translation>
</message>
<message>
<source>The creation of a widget of the class '%1' failed.</source>
<translation type="obsolete">创建类 %1 的窗口部件失败。</translation>
</message>
<message>
<source>Flags property are not supported yet.</source>
<translation type="obsolete">标记属性还不被支持。</translation>
</message>
<message>
<source>While applying tab stops: The widget '%1' could not be found.</source>
<translation type="obsolete">在应用制表符时中断：无法找到窗口部件“%1”。</translation>
</message>
<message>
<source>This version of the uitools library is linked without script support.</source>
<translation type="obsolete">这个版本的界面工具库没有被链接脚本支持。</translation>
</message>
<message>
<source>Not used</source>
<translation type="obsolete">没有被使用</translation>
</message>
<message>
<source>Change Object Name</source>
<translation type="obsolete">改变对象名称</translation>
</message>
<message>
<source>Object Name</source>
<translation type="obsolete">对象名称</translation>
</message>
<message>
<source>The widgetbox could not load the file %1.</source>
<translation type="obsolete">窗口部件盒无法加载文件 %1。</translation>
</message>
<message>
<source>The widgetbox could not parse the file %1. An error occurred at line %2: %3</source>
<translation type="obsolete">窗口部件盒无法解析文件 %1。在 %2 行发生一个错误：%3</translation>
</message>
<message>
<source>The file %1 does not appear to be a widgetbox file.</source>
<translation type="obsolete">文件 %1 没有被作为一个窗口部件盒文件出现。</translation>
</message>
<message>
<source>An error occurred while parsing the file %1: %2 is not a valid child of the root element.</source>
<translation type="obsolete">在解析文件 %1 时发生一个错误：%2 不是根元素的有效子元素。</translation>
</message>
<message>
<source>The class attribute for the class %1 does not match the class name %2.</source>
<translation type="obsolete">类 %1 的类属性和类名称 %2 不匹配。</translation>
</message>
<message>
<source>The class attribute for the class %1 is missing.</source>
<translation type="obsolete">缺少类 %1 的类属性。</translation>
</message>
<message>
<source>The style %1 could not be loaded.</source>
<translation type="obsolete">无法加载风格 %1。</translation>
</message>
<message>
<source>The preview failed to build.</source>
<translation type="obsolete">构建预览失败。</translation>
</message>
<message>
<source>%1 - [Preview]</source>
<translation type="obsolete">%1 - [预览]</translation>
</message>
<message>
<source>Designer</source>
<translation type="obsolete">设计师</translation>
</message>
<message>
<source>Change script</source>
<translation type="obsolete">改变脚本</translation>
</message>
<message>
<source>A custom widget plugin whose class name (%1) matches that of an existing class has been found.</source>
<translation type="obsolete">类名称为 %1 的自定义窗口部件插件和一个已经存在的类一样。</translation>
</message>
<message>
<source>The custom widget factory registered for widgets of class %1 returned 0.</source>
<translation type="obsolete">为类 %1 的窗口部件注册的自定义窗口部件工厂返回 0。</translation>
</message>
<message>
<source>A class name mismatch occurred when creating a widget using the custom widget factory registered for widgets of class %1. It returned a widget of class %2.</source>
<translation type="obsolete">在使用为类 %1 的窗口部件注册的自定义窗口部件工厂创建一个窗口部件时，发生了类名称不匹配。它返回了一个类 %2 的窗口部件。</translation>
</message>
<message>
<source>QFormBuilder was unable to create a widget of the class '%1'.</source>
<translation type="obsolete">QFormBuilder 不能创建类“%1”的一个窗口部件。</translation>
</message>
<message>
<source>The layout type `%1' is not supported.</source>
<translation type="obsolete">布局类型“%1”不被支持。</translation>
</message>
<message>
<source>The set-type property %1 could not be read.</source>
<translation type="obsolete">无法读取集类型属性 %1。</translation>
</message>
<message>
<source>The enumeration-type property %1 could not be read.</source>
<translation type="obsolete">无法读取枚举类型属性 %1。</translation>
</message>
<message>
<source>Reading properties of the type %1 is not supported yet.</source>
<translation type="obsolete">还不支持读取类型 %1 的属性。</translation>
</message>
<message>
<source>The property %1 could not be written. The type %2 is not supported yet.</source>
<translation type="obsolete">属性 %1 无法被写入。还不支持类型 %2。</translation>
</message>
<message>
<source>The current page of the container '%1' (%2) could not be determined while creating a layout.This indicates an inconsistency in the ui-file, probably a layout being constructed on a container widget.</source>
<translation type="obsolete">在创建一个布局的时候，不能决定这个容器“%1”（%2）的当前页。这表明在 UI 文件中有一个矛盾，也许在一个容器窗口部件中已经构造了一个布局。</translation>
</message>
<message>
<source>The enumeration-value "%1" is invalid. The default value "%2" will be used instead.</source>
<translation type="obsolete">枚举变量值“%1”是无效的。默认值“%2”将会被用来替代。</translation>
</message>
<message>
<source>The layout type '%1' is not supported, defaulting to grid.</source>
<translation type="obsolete">不支持布局类型“%1”，默认为网格。</translation>
</message>
<message>
<source>separator</source>
<translation type="obsolete">分隔符</translation>
</message>
<message>
<source>Object</source>
<translation type="obsolete">对象</translation>
</message>
<message>
<source>Class</source>
<translation type="obsolete">类</translation>
</message>
<message>
<source><noname></source>
<translation type="obsolete"><无名称></translation>
</message>
<message>
<source>SENDER(%1), SIGNAL(%2), RECEIVER(%3), SLOT(%4)</source>
<translation type="obsolete">SENDER(%1), SIGNAL(%2), RECEIVER(%3), SLOT(%4)</translation>
</message>
<message>
<source>%1 - [Code]</source>
<translation type="obsolete">%1 - [Code]</translation>
</message>
<message>
<source>%1 is not a valid enumeration value of '%2'.</source>
<translation type="obsolete">%1 不是“%2”中的一个有效的枚举值。</translation>
</message>
<message>
<source>'%1' could not be converted to an enumeration value of type '%2'.</source>
<translation type="obsolete">无法将“%1”转换成“%2”中的一个枚举值。</translation>
</message>
<message>
<source>'%1' could not be converted to a flag value of type '%2'.</source>
<translation type="obsolete">无法将“%1”转换成“%2”中的一个标记值。</translation>
</message>
<message>
<source>The XML code specified for the widget %1 does not contain any widget elements.
%2</source>
<translation type="obsolete">规定窗口部件 %1 的 XML 代码不包含任何窗口部件元素。
%2</translation>
</message>
<message>
<source>The XML code specified for the widget %1 does not contain valid widget element
%2</source>
<translation type="obsolete">规定窗口部件 %1 的 XML 代码不包含任何有效的窗口部件元素。%2</translation>
</message>
<message>
<source>A parse error occurred at line %1, column %2 of %3:
%4</source>
<translation type="obsolete">在 %3 的 %1 行、%2 列发生了一个解析错误：
%4</translation>
</message>
<message>
<source>The xml code specified for the custom widget %1 could not be parsed. An error occurred at line %2: %3</source>
<translation type="obsolete">无法解析规定自定义窗口部件 %1 的 XML 代码。在 %2 行发生一个错误：%3</translation>
</message>
<message>
<source>Attempt to add child that is not of class QWizardPage to QWizard.</source>
<translation type="obsolete">试图把一个并不是 QWizardPage 类的对象添加为 QWizard 的子对象。</translation>
</message>
<message>
<source>Empty widget item in %1 '%2'.</source>
<translation type="obsolete">在 %1 “%2”中的空窗口部件项。</translation>
</message>
<message>
<source>QFormBuilder was unable to create a custom widget of the class '%1'; defaulting to base class '%2'.</source>
<translation type="obsolete">QFormBuilder 无法创建基于类“%1”的自定义窗口部件；默认基类为“%2”。</translation>
</message>
<message>
<source>Attempt to add a layout to a widget '%1' (%2) which already has an unmanaged layout of type %3.
This indicates an inconsistency in the ui-file.</source>
<translation type="obsolete">试图向一个已经包含了类型为 %3 的非托管布局的窗口部件 “%1”（%2）添加布局。
这表明这个ui文件中有矛盾。</translation>
</message>
<message>
<source>Attempt to add a layout to a widget '%1' (%2) which already has a layout of non-box type %3.
This indicates an inconsistency in the ui-file.</source>
<translation type="obsolete">试图向一个已经包含了类型为 %3 的非框布局的窗口部件 “%1”（%2）添加布局。
这表明这个ui文件中有矛盾。</translation>
</message>
</context>
<context>
<name>QStackedWidgetEventFilter</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_stackedbox.cpp" line="+194"/>
<source>Previous Page</source>
<translation>上一页</translation>
</message>
<message>
<location line="+1"/>
<source>Next Page</source>
<translation>下一页</translation>
</message>
<message>
<location line="+1"/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location line="+1"/>
<source>Before Current Page</source>
<translation>在当前页之前</translation>
</message>
<message>
<location line="+1"/>
<source>After Current Page</source>
<translation>在当前页之后</translation>
</message>
<message>
<location line="+1"/>
<source>Change Page Order...</source>
<translation>改变页顺序...</translation>
</message>
<message>
<location line="+72"/>
<source>Change Page Order</source>
<translation>改变页顺序</translation>
</message>
<message>
<location line="+49"/>
<source>Page %1 of %2</source>
<translation>%2 的页 %1</translation>
</message>
<message>
<location line="+11"/>
<source>Insert Page</source>
<translation>插入页</translation>
</message>
</context>
<context>
<name>QStackedWidgetPreviewEventFilter</name>
<message>
<location line="-150"/>
<source>Go to previous page of %1 '%2' (%3/%4).</source>
<translation>前往 %1 “%2”(%3/%4)的上一页。</translation>
</message>
<message>
<location line="+4"/>
<source>Go to next page of %1 '%2' (%3/%4).</source>
<translation>前往 %1 “%2”(%3/%4)的下一页。</translation>
</message>
</context>
<context>
<name>QTabWidgetEventFilter</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_tabwidget.cpp" line="+89"/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location line="+1"/>
<source>Before Current Page</source>
<translation>在当前页之前</translation>
</message>
<message>
<location line="+1"/>
<source>After Current Page</source>
<translation>在当前页之后</translation>
</message>
<message>
<location line="+283"/>
<source>Page %1 of %2</source>
<translation>%2 的页 %1</translation>
</message>
<message>
<location line="+12"/>
<source>Insert Page</source>
<translation>插入页</translation>
</message>
</context>
<context>
<name>QToolBoxHelper</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_toolbox.cpp" line="+64"/>
<source>Delete Page</source>
<translation>删除页</translation>
</message>
<message>
<location line="+1"/>
<source>Before Current Page</source>
<translation>在当前页之前</translation>
</message>
<message>
<location line="+1"/>
<source>After Current Page</source>
<translation>在当前页之后</translation>
</message>
<message>
<location line="+1"/>
<source>Change Page Order...</source>
<translation>改变页顺序...</translation>
</message>
<message>
<location line="+116"/>
<source>Change Page Order</source>
<translation>改变页顺序</translation>
</message>
<message>
<location line="+44"/>
<source>Page %1 of %2</source>
<translation>%2 的页 %1</translation>
</message>
<message>
<location line="+12"/>
<source>Insert Page</source>
<translation>插入页</translation>
</message>
</context>
<context>
<name>QtBoolEdit</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertybrowserutils.cpp" line="+226"/>
<location line="+10"/>
<location line="+25"/>
<source>True</source>
<translation>真</translation>
</message>
<message>
<location line="-25"/>
<location line="+25"/>
<source>False</source>
<translation>假</translation>
</message>
</context>
<context>
<name>QtBoolPropertyManager</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertymanager.cpp" line="+1477"/>
<source>True</source>
<translation>真</translation>
</message>
<message>
<location line="+1"/>
<source>False</source>
<translation>假</translation>
</message>
</context>
<context>
<name>QtCharEdit</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qteditorfactory.cpp" line="+1601"/>
<source>Clear Char</source>
<translation>清除字符</translation>
</message>
</context>
<context>
<name>QtColorEditWidget</name>
<message>
<location line="+611"/>
<source>...</source>
<translation>...</translation>
</message>
</context>
<context>
<name>QtColorPropertyManager</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertymanager.cpp" line="+4777"/>
<source>Red</source>
<translation>红色</translation>
</message>
<message>
<location line="+8"/>
<source>Green</source>
<translation>绿色</translation>
</message>
<message>
<location line="+8"/>
<source>Blue</source>
<translation>蓝色</translation>
</message>
<message>
<location line="+8"/>
<source>Alpha</source>
<translation>透明度</translation>
</message>
</context>
<context>
<name>QtCursorDatabase</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertybrowserutils.cpp" line="-206"/>
<source>Arrow</source>
<translation>箭头</translation>
</message>
<message>
<location line="+2"/>
<source>Up Arrow</source>
<translation>上箭头</translation>
</message>
<message>
<location line="+2"/>
<source>Cross</source>
<translation>十字</translation>
</message>
<message>
<location line="+2"/>
<source>Wait</source>
<translation>等待</translation>
</message>
<message>
<location line="+2"/>
<source>IBeam</source>
<translation>文本光标</translation>
</message>
<message>
<location line="+2"/>
<source>Size Vertical</source>
<translation>垂直大小</translation>
</message>
<message>
<location line="+2"/>
<source>Size Horizontal</source>
<translation>水平大小</translation>
</message>
<message>
<location line="+2"/>
<source>Size Backslash</source>
<translation>反斜线大小</translation>
</message>
<message>
<location line="+2"/>
<source>Size Slash</source>
<translation>斜线大小</translation>
</message>
<message>
<location line="+2"/>
<source>Size All</source>
<translation>全部大小</translation>
</message>
<message>
<location line="+2"/>
<source>Blank</source>
<translation>空白</translation>
</message>
<message>
<location line="+2"/>
<source>Split Vertical</source>
<translation>水平分隔</translation>
</message>
<message>
<location line="+2"/>
<source>Split Horizontal</source>
<translation>垂直分隔</translation>
</message>
<message>
<location line="+2"/>
<source>Pointing Hand</source>
<translation>指向手势</translation>
</message>
<message>
<location line="+2"/>
<source>Forbidden</source>
<translation>禁止</translation>
</message>
<message>
<location line="+2"/>
<source>Open Hand</source>
<translation>打开手势</translation>
</message>
<message>
<location line="+2"/>
<source>Closed Hand</source>
<translation>关闭手势</translation>
</message>
<message>
<location line="+2"/>
<source>What's This</source>
<translation>这是什么</translation>
</message>
<message>
<location line="+2"/>
<source>Busy</source>
<translation>忙</translation>
</message>
<message>
<source>[%1, %2, %3] (%4)</source>
<translation type="obsolete">[%1, %2, %3] (%4)</translation>
</message>
</context>
<context>
<name>QtFontEditWidget</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qteditorfactory.cpp" line="+201"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location line="+20"/>
<source>Select Font</source>
<translation>选择字体</translation>
</message>
</context>
<context>
<name>QtFontPropertyManager</name>
<message>
<source>[%1, %2]</source>
<translation type="obsolete">[%1, %2]</translation>
</message>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertymanager.cpp" line="-353"/>
<source>Family</source>
<translation>字体族</translation>
</message>
<message>
<location line="+13"/>
<source>Point Size</source>
<translation>点大小</translation>
</message>
<message>
<location line="+8"/>
<source>Bold</source>
<translation>粗体</translation>
</message>
<message>
<location line="+7"/>
<source>Italic</source>
<translation>斜体</translation>
</message>
<message>
<location line="+7"/>
<source>Underline</source>
<translation>下划线</translation>
</message>
<message>
<location line="+7"/>
<source>Strikeout</source>
<translation>删除线</translation>
</message>
<message>
<location line="+7"/>
<source>Kerning</source>
<translation>字距调整</translation>
</message>
</context>
<context>
<name>QtGradientDialog</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradientdialog.ui"/>
<source>Edit Gradient</source>
<translation>编辑渐变</translation>
</message>
</context>
<context>
<name>QtGradientEditor</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradienteditor.cpp" line="+435"/>
<source>Start X</source>
<translation>开始 X</translation>
</message>
<message>
<location line="+4"/>
<source>Start Y</source>
<translation>开始 Y</translation>
</message>
<message>
<location line="+4"/>
<source>Final X</source>
<translation>结束 X</translation>
</message>
<message>
<location line="+4"/>
<source>Final Y</source>
<translation>结束 Y</translation>
</message>
<message>
<location line="+7"/>
<location line="+24"/>
<source>Central X</source>
<translation>中央 X</translation>
</message>
<message>
<location line="-20"/>
<location line="+24"/>
<source>Central Y</source>
<translation>中央 Y</translation>
</message>
<message>
<location line="-20"/>
<source>Focal X</source>
<translation>焦点 X</translation>
</message>
<message>
<location line="+4"/>
<source>Focal Y</source>
<translation>焦点 Y</translation>
</message>
<message>
<location line="+4"/>
<source>Radius</source>
<translation>半径</translation>
</message>
<message>
<location line="+16"/>
<source>Angle</source>
<translation>角度</translation>
</message>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradienteditor.ui"/>
<source>Form</source>
<translation>窗体</translation>
</message>
<message>
<location/>
<source>Gradient Editor</source>
<translation>渐变编辑器</translation>
</message>
<message>
<location/>
<source>This area shows a preview of the gradient being edited. It also allows you to edit parameters specific to the gradient's type such as start and final point, radius, etc. by drag & drop.</source>
<translation>这个区域显示的是正在被编辑的渐变的预览。它也允许您通过拖放编辑规定这个渐变类型的变量，例如开始点和结束点、半径等等。</translation>
</message>
<message>
<location/>
<source>1</source>
<translation>1</translation>
</message>
<message>
<location/>
<source>2</source>
<translation>2</translation>
</message>
<message>
<location/>
<source>3</source>
<translation>3</translation>
</message>
<message>
<location/>
<source>4</source>
<translation>4</translation>
</message>
<message>
<location/>
<source>5</source>
<translation>5</translation>
</message>
<message>
<location/>
<source>Gradient Stops Editor</source>
<translation>渐变中止点编辑器</translation>
</message>
<message>
<location/>
<source>This area allows you to edit gradient stops. Double click on the existing stop handle to duplicate it. Double click outside of the existing stop handles to create a new stop. Drag & drop the handle to reposition it. Use right mouse button to popup context menu with extra actions.</source>
<translation>这个区域允许您编辑渐变的中止点。在已存在的中止点句柄上双击会复制它。在已存在的中止点句柄之外双击会创建一个新的中止点。拖放这个句柄可以重新定位它。使用鼠标右键会弹出带有其它动作的上下文菜单。</translation>
</message>
<message>
<location/>
<source>Zoom</source>
<translation>缩放</translation>
</message>
<message>
<location/>
<source>Reset Zoom</source>
<translation>重置缩放</translation>
</message>
<message>
<location/>
<source>Position</source>
<translation>位置</translation>
</message>
<message>
<location/>
<source>Hue</source>
<translation>色调</translation>
</message>
<message>
<location/>
<source>H</source>
<translation>H</translation>
</message>
<message>
<location/>
<source>Saturation</source>
<translation>浓度</translation>
</message>
<message>
<location/>
<source>S</source>
<translation>S</translation>
</message>
<message>
<location/>
<source>Sat</source>
<translation>浓度</translation>
</message>
<message>
<location/>
<source>Value</source>
<translation>值</translation>
</message>
<message>
<location/>
<source>V</source>
<translation>V</translation>
</message>
<message>
<location/>
<source>Val</source>
<translation>值</translation>
</message>
<message>
<location/>
<source>Alpha</source>
<translation>透明度</translation>
</message>
<message>
<location/>
<source>A</source>
<translation>A</translation>
</message>
<message>
<location/>
<source>Type</source>
<translation>类型</translation>
</message>
<message>
<location/>
<source>Spread</source>
<translation>展开</translation>
</message>
<message>
<location/>
<source>Color</source>
<translation>颜色</translation>
</message>
<message>
<location/>
<source>Current stop's color</source>
<translation>当前中止点颜色</translation>
</message>
<message>
<location/>
<source>Show HSV specification</source>
<translation>显示 HSV 规格</translation>
</message>
<message>
<location/>
<source>HSV</source>
<translation>HSV</translation>
</message>
<message>
<location/>
<source>Show RGB specification</source>
<translation>显示 RGB 规格</translation>
</message>
<message>
<location/>
<source>RGB</source>
<translation>RGB</translation>
</message>
<message>
<location/>
<source>Current stop's position</source>
<translation>当前中止点位置</translation>
</message>
<message>
<location/>
<source>%</source>
<translation>%</translation>
</message>
<message>
<location/>
<source>Zoom In</source>
<translation>放大</translation>
</message>
<message>
<location/>
<source>Zoom Out</source>
<translation>缩小</translation>
</message>
<message>
<location/>
<source>Toggle details extension</source>
<translation>切换细节扩展</translation>
</message>
<message>
<location/>
<source>></source>
<translation>></translation>
</message>
<message>
<location/>
<source>Linear Type</source>
<translation>线性类型</translation>
</message>
<message>
<location/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location/>
<source>Radial Type</source>
<translation>辐射类型</translation>
</message>
<message>
<location/>
<source>Conical Type</source>
<translation>锥形类型</translation>
</message>
<message>
<location/>
<source>Pad Spread</source>
<translation>填充平铺</translation>
</message>
<message>
<location/>
<source>Repeat Spread</source>
<translation>重复平铺</translation>
</message>
<message>
<location/>
<source>Reflect Spread</source>
<translation>反射平铺</translation>
</message>
</context>
<context>
<name>QtGradientStopsWidget</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradientstopswidget.cpp" line="+949"/>
<source>New Stop</source>
<translation>新建中止点</translation>
</message>
<message>
<location line="+1"/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location line="+1"/>
<source>Flip All</source>
<translation>翻转全部</translation>
</message>
<message>
<location line="+1"/>
<source>Select All</source>
<translation>选择全部</translation>
</message>
<message>
<location line="+1"/>
<source>Zoom In</source>
<translation>放大</translation>
</message>
<message>
<location line="+1"/>
<source>Zoom Out</source>
<translation>缩小</translation>
</message>
<message>
<location line="+1"/>
<source>Reset Zoom</source>
<translation>重置缩放</translation>
</message>
</context>
<context>
<name>QtGradientView</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradientview.cpp" line="+107"/>
<source>Grad</source>
<translation>渐变</translation>
</message>
<message>
<location line="+26"/>
<source>Remove Gradient</source>
<translation>移除渐变</translation>
</message>
<message>
<location line="+1"/>
<source>Are you sure you want to remove the selected gradient?</source>
<translation>您确定要移除选中的渐变么？</translation>
</message>
<message>
<location line="+74"/>
<location filename="../tools/shared/qtgradienteditor/qtgradientview.ui"/>
<source>New...</source>
<translation>新建...</translation>
</message>
<message>
<location line="+1"/>
<location filename="../tools/shared/qtgradienteditor/qtgradientview.ui"/>
<source>Edit...</source>
<translation>编辑...</translation>
</message>
<message>
<location line="+1"/>
<location filename="../tools/shared/qtgradienteditor/qtgradientview.ui"/>
<source>Rename</source>
<translation>重命名</translation>
</message>
<message>
<location line="+1"/>
<location filename="../tools/shared/qtgradienteditor/qtgradientview.ui"/>
<source>Remove</source>
<translation>移除</translation>
</message>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradientview.ui"/>
<source>Gradient View</source>
<translation>渐变视图</translation>
</message>
</context>
<context>
<name>QtGradientViewDialog</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradientviewdialog.h" line="+62"/>
<location filename="../tools/shared/qtgradienteditor/qtgradientviewdialog.ui"/>
<source>Select Gradient</source>
<translation>选择渐变</translation>
</message>
</context>
<context>
<name>QtKeySequenceEdit</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertybrowserutils.cpp" line="+221"/>
<source>Clear Shortcut</source>
<translation>清空快捷键</translation>
</message>
</context>
<context>
<name>QtLocalePropertyManager</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertymanager.cpp" line="-3561"/>
<source>%1, %2</source>
<translation>%1, %2</translation>
</message>
<message>
<location line="+53"/>
<source>Language</source>
<translation>语言</translation>
</message>
<message>
<location line="+8"/>
<source>Country</source>
<translation>国家/地区</translation>
</message>
</context>
<context>
<name>QtPointFPropertyManager</name>
<message>
<location line="+415"/>
<source>(%1, %2)</source>
<translation>(%1, %2)</translation>
</message>
<message>
<location line="+71"/>
<source>X</source>
<translation>X</translation>
</message>
<message>
<location line="+8"/>
<source>Y</source>
<translation>Y</translation>
</message>
</context>
<context>
<name>QtPointPropertyManager</name>
<message>
<location line="-322"/>
<source>(%1, %2)</source>
<translation>(%1, %2)</translation>
</message>
<message>
<location line="+37"/>
<source>X</source>
<translation>X</translation>
</message>
<message>
<location line="+7"/>
<source>Y</source>
<translation>Y</translation>
</message>
</context>
<context>
<name>QtPropertyBrowserUtils</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertybrowserutils.cpp" line="-136"/>
<source>[%1, %2, %3] (%4)</source>
<translation>[%1, %2, %3] (%4)</translation>
</message>
<message>
<location line="+30"/>
<source>[%1, %2]</source>
<translation>[%1, %2]</translation>
</message>
</context>
<context>
<name>QtRectFPropertyManager</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertymanager.cpp" line="+1716"/>
<source>[(%1, %2), %3 x %4]</source>
<translation>[(%1, %2), %3 x %4]</translation>
</message>
<message>
<location line="+156"/>
<source>X</source>
<translation>X</translation>
</message>
<message>
<location line="+8"/>
<source>Y</source>
<translation>Y</translation>
</message>
<message>
<location line="+8"/>
<source>Width</source>
<translation>宽度</translation>
</message>
<message>
<location line="+9"/>
<source>Height</source>
<translation>高度</translation>
</message>
</context>
<context>
<name>QtRectPropertyManager</name>
<message>
<location line="-614"/>
<source>[(%1, %2), %3 x %4]</source>
<translation>[(%1, %2), %3 x %4]</translation>
</message>
<message>
<location line="+120"/>
<source>X</source>
<translation>X</translation>
</message>
<message>
<location line="+7"/>
<source>Y</source>
<translation>Y</translation>
</message>
<message>
<location line="+7"/>
<source>Width</source>
<translation>宽度</translation>
</message>
<message>
<location line="+8"/>
<source>Height</source>
<translation>高度</translation>
</message>
</context>
<context>
<name>QtResourceEditorDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/qtresourceeditordialog.cpp" line="+76"/>
<source>%1 already exists.
Do you want to replace it?</source>
<translation>%1 已经存在。
您想要替换它么？</translation>
</message>
<message>
<location line="+5"/>
<source>The file does not appear to be a resource file; element '%1' was found where '%2' was expected.</source>
<translation>这个文件好像不是一个资源文件；我们所期望的是“%2”，但是只找到了元素“%1”。</translation>
</message>
<message>
<location line="+902"/>
<source>%1 [read-only]</source>
<translation>%1 [只读]</translation>
</message>
<message>
<location line="+2"/>
<location line="+198"/>
<source>%1 [missing]</source>
<translation>%1 [缺少]</translation>
</message>
<message>
<location line="-72"/>
<source><no prefix></source>
<translation><无前缀></translation>
</message>
<message>
<location line="+320"/>
<location line="+567"/>
<source>New Resource File</source>
<translation>新建资源文件</translation>
</message>
<message>
<location line="-565"/>
<location line="+25"/>
<source>Resource files (*.qrc)</source>
<translation>资源文件 (*.qrc)</translation>
</message>
<message>
<location line="-2"/>
<source>Import Resource File</source>
<translation>导入资源文件</translation>
</message>
<message>
<location line="+112"/>
<source>newPrefix</source>
<translation>新前缀</translation>
</message>
<message>
<source><p><b>Warning:</b> The file:</p><p>%1</p><p>is outside of the current resource file's directory.</p><p>To resolve the issue, press:</p><table><tr><th>Copy</th><td>to copy the file to resource file's directory.</td></tr><tr><th>Copy As...</th><td>to copy the file to one of resource file's subdirectories.</td></tr><tr><th>Keep</th><td>to use its current location.</td></tr></table></source>
<translation type="obsolete"><p><b>警告：</b> 文件：</p><p>%1</p><p>在当前资源文件所在目录之外。</p><p>为了解决这个问题，请按：</p><table><tr><th>复制</th><td>把这个文件复制到资源文件所在的目录。</td></tr><tr><th>另复制为...</th><td>会把这个文件复制到资源文件所在目录下面的一个子目录中。</td></tr><tr><th>保留</th><td>会使用它的当前位置。</td></tr></table></translation>
</message>
<message>
<location line="+49"/>
<source>Add Files</source>
<translation>添加文件</translation>
</message>
<message>
<location line="+21"/>
<source>Incorrect Path</source>
<translation>不正确的路径</translation>
</message>
<message>
<location line="+3"/>
<location line="+19"/>
<location line="+212"/>
<location line="+7"/>
<source>Copy</source>
<translation>复制</translation>
</message>
<message>
<location line="-236"/>
<source>Copy As...</source>
<translation>另复制为...</translation>
</message>
<message>
<location line="+2"/>
<source>Keep</source>
<translation>保留</translation>
</message>
<message>
<location line="+2"/>
<source>Skip</source>
<translation>忽略</translation>
</message>
<message>
<location line="+87"/>
<source>Clone Prefix</source>
<translation>复制前缀</translation>
</message>
<message>
<location line="+1"/>
<source>Enter the suffix which you want to add to the names of the cloned files.
This could for example be a language extension like "_de".</source>
<translation>请输入您要为被复制的文件的名称后添加的后缀。
例如像“_de”一样的语言扩展。</translation>
</message>
<message>
<location line="+113"/>
<location line="+4"/>
<source>Copy As</source>
<translation>另复制为</translation>
</message>
<message>
<location line="+1"/>
<source><p>The selected file:</p><p>%1</p><p>is outside of the current resource file's directory:</p><p>%2</p><p>Please select another path within this directory.<p></source>
<translation><p>被选择的文件：</p><p>%1</p><p>在当前资源路径所在目录之外：</p><p>%2</p><p>请选择在这个目录下面的另外一个路径。<p></translation>
</message>
<message>
<location line="+20"/>
<source>Could not overwrite %1.</source>
<translation>无法覆盖 %1。</translation>
</message>
<message>
<source>Could not copy:
%1
to:
%2</source>
<translation type="obsolete">无法复制：
%1
到：
%2</translation>
</message>
<message>
<location line="-289"/>
<source><p><b>Warning:</b> The file</p><p>%1</p><p>is outside of the current resource file's parent directory.</p></source>
<translation><p><b>警告：</b>文件</p><p>%1</p><p>放在当前资源文件的夫目录以外。</p></translation>
</message>
<message>
<location line="+8"/>
<source><p>To resolve the issue, press:</p><table><tr><th align="left">Copy</th><td>to copy the file to the resource file's parent directory.</td></tr><tr><th align="left">Copy As...</th><td>to copy the file into a subdirectory of the resource file's parent directory.</td></tr><tr><th align="left">Keep</th><td>to use its current location.</td></tr></table></source>
<translation><p>要解决这个问题，请按：</p><table><tr><th align="left">复制</th><td>将这个文件复制到资源目录的父目录中。</td></tr><tr><th align="left">复制为...</th><td>将这个文件复制到资源目录的父目录下的某个子目录中。</td></tr><tr><th align="left">保持</th><td>使用当前位置。</td></tr></table></translation>
</message>
<message>
<location line="+288"/>
<source>Could not copy
%1
to
%2</source>
<translation>无法复制
%1
到
%2</translation>
</message>
<message>
<location line="+35"/>
<source>A parse error occurred at line %1, column %2 of %3:
%4</source>
<translation>在 %3 的 %1 行、%2 列发生了一个解析错误：
%4</translation>
</message>
<message>
<location line="+12"/>
<source>Save Resource File</source>
<translation>保存资源文件</translation>
</message>
<message>
<location line="+1"/>
<source>Could not write %1: %2</source>
<translation>无法写入 %1：%2</translation>
</message>
<message>
<location line="+34"/>
<source>Edit Resources</source>
<translation>编辑资源</translation>
</message>
<message>
<location line="+35"/>
<source>New...</source>
<translation>新建...</translation>
</message>
<message>
<location line="+2"/>
<source>Open...</source>
<translation>打开...</translation>
</message>
<message>
<location line="+1"/>
<source>Open Resource File</source>
<translation>打开资源文件</translation>
</message>
<message>
<location line="+1"/>
<location line="+11"/>
<source>Remove</source>
<translation>移除</translation>
</message>
<message>
<location line="-10"/>
<location line="+11"/>
<source>Move Up</source>
<translation>向上移动</translation>
</message>
<message>
<location line="-10"/>
<location line="+11"/>
<source>Move Down</source>
<translation>向下移动</translation>
</message>
<message>
<location line="-9"/>
<location line="+1"/>
<source>Add Prefix</source>
<translation>添加前缀</translation>
</message>
<message>
<location line="+1"/>
<source>Add Files...</source>
<translation>添加文件...</translation>
</message>
<message>
<location line="+1"/>
<source>Change Prefix</source>
<translation>改变前缀</translation>
</message>
<message>
<location line="+1"/>
<source>Change Language</source>
<translation>改变语言</translation>
</message>
<message>
<location line="+1"/>
<source>Change Alias</source>
<translation>改变别名</translation>
</message>
<message>
<location line="+1"/>
<source>Clone Prefix...</source>
<translation>复制前缀...</translation>
</message>
<message>
<location line="+37"/>
<source>Prefix / Path</source>
<translation>前缀 / 路径</translation>
</message>
<message>
<location line="+1"/>
<source>Language / Alias</source>
<translation>语言 / 别名</translation>
</message>
<message>
<location line="+119"/>
<source><html><p><b>Warning:</b> There have been problems while reloading the resources:</p><pre>%1</pre></html></source>
<translation><html><p><b>警告：</b> 在重新加载资源的时候发生了一些错误：</p><pre>%1</pre></html></translation>
</message>
<message>
<location line="+2"/>
<source>Resource Warning</source>
<translation>资源警告</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/qtresourceeditordialog.ui"/>
<source>Dialog</source>
<translation>对话框</translation>
</message>
<message>
<location/>
<source>New File</source>
<translation>新建文件</translation>
</message>
<message>
<location/>
<source>N</source>
<translation>N</translation>
</message>
<message>
<location/>
<source>Remove File</source>
<translation>移除文件</translation>
</message>
<message>
<location/>
<source>R</source>
<translation>R</translation>
</message>
<message>
<location/>
<source>I</source>
<translation>I</translation>
</message>
<message>
<location/>
<source>New Resource</source>
<translation>新建资源</translation>
</message>
<message>
<location/>
<source>A</source>
<translation>A</translation>
</message>
<message>
<location/>
<source>Remove Resource or File</source>
<translation>移除资源或者文件</translation>
</message>
<message>
<source>horizontalSpacer</source>
<translation type="obsolete">水平间隔器</translation>
</message>
</context>
<context>
<name>QtResourceView</name>
<message>
<location filename="../tools/designer/src/lib/shared/qtresourceview.cpp" line="+435"/>
<source>Size: %1 x %2
%3</source>
<translation>大小：%1 x %2
%3</translation>
</message>
<message>
<location line="+18"/>
<source>Edit Resources...</source>
<translation>编辑资源...</translation>
</message>
<message>
<location line="+5"/>
<source>Reload</source>
<translation>重新加载</translation>
</message>
<message>
<location line="+5"/>
<source>Copy Path</source>
<translation>复制路径</translation>
</message>
</context>
<context>
<name>QtResourceViewDialog</name>
<message>
<location line="+247"/>
<source>Select Resource</source>
<translation>选择资源</translation>
</message>
</context>
<context>
<name>QtSizeFPropertyManager</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qtpropertymanager.cpp" line="-537"/>
<source>%1 x %2</source>
<translation>%1 x %2</translation>
</message>
<message>
<location line="+130"/>
<source>Width</source>
<translation>宽度</translation>
</message>
<message>
<location line="+9"/>
<source>Height</source>
<translation>高度</translation>
</message>
</context>
<context>
<name>QtSizePolicyPropertyManager</name>
<message>
<location line="+1719"/>
<location line="+1"/>
<source><Invalid></source>
<translation type="unfinished"></translation>
</message>
<message>
<location line="+1"/>
<source>[%1, %2, %3, %4]</source>
<translation>[%1, %2, %3, %4]</translation>
</message>
<message>
<location line="+45"/>
<source>Horizontal Policy</source>
<translation>水平策略</translation>
</message>
<message>
<location line="+9"/>
<source>Vertical Policy</source>
<translation>垂直策略</translation>
</message>
<message>
<location line="+9"/>
<source>Horizontal Stretch</source>
<translation>水平伸展</translation>
</message>
<message>
<location line="+8"/>
<source>Vertical Stretch</source>
<translation>垂直伸展</translation>
</message>
</context>
<context>
<name>QtSizePropertyManager</name>
<message>
<location line="-2298"/>
<source>%1 x %2</source>
<translation>%1 x %2</translation>
</message>
<message>
<location line="+96"/>
<source>Width</source>
<translation>宽度</translation>
</message>
<message>
<location line="+8"/>
<source>Height</source>
<translation>高度</translation>
</message>
</context>
<context>
<name>QtToolBarDialog</name>
<message>
<location filename="../tools/shared/qttoolbardialog/qttoolbardialog.cpp" line="+1244"/>
<source>Custom Toolbar</source>
<translation>自定义工具栏</translation>
</message>
<message>
<location line="+545"/>
<source>< S E P A R A T O R ></source>
<translation>< 分 割 符 ></translation>
</message>
<message>
<location filename="../tools/shared/qttoolbardialog/qttoolbardialog.ui"/>
<source>Customize Toolbars</source>
<translation>自定义工具栏</translation>
</message>
<message>
<location/>
<source>1</source>
<translation>1</translation>
</message>
<message>
<location/>
<source>Actions</source>
<translation>动作</translation>
</message>
<message>
<location/>
<source>Toolbars</source>
<translation>工具栏</translation>
</message>
<message>
<location/>
<source>Add new toolbar</source>
<translation>添加新工具栏</translation>
</message>
<message>
<location/>
<source>New</source>
<translation>新建</translation>
</message>
<message>
<location/>
<source>Remove selected toolbar</source>
<translation>移除选中工具栏</translation>
</message>
<message>
<location/>
<source>Remove</source>
<translation>移除</translation>
</message>
<message>
<location/>
<source>Rename toolbar</source>
<translation>重命名工具栏</translation>
</message>
<message>
<location/>
<source>Rename</source>
<translation>重命名</translation>
</message>
<message>
<location/>
<source>Move action up</source>
<translation>向上移动动作</translation>
</message>
<message>
<location/>
<source>Up</source>
<translation>向上</translation>
</message>
<message>
<location/>
<source>Remove action from toolbar</source>
<translation>从工具栏中移除动作</translation>
</message>
<message>
<location/>
<source><-</source>
<translation><-</translation>
</message>
<message>
<location/>
<source>Add action to toolbar</source>
<translation>向工具栏中添加动作</translation>
</message>
<message>
<location/>
<source>-></source>
<translation>-></translation>
</message>
<message>
<location/>
<source>Move action down</source>
<translation>向下移动动作</translation>
</message>
<message>
<location/>
<source>Down</source>
<translation>向下</translation>
</message>
<message>
<location/>
<source>Current Toolbar Actions</source>
<translation>当前工具栏动作</translation>
</message>
</context>
<context>
<name>QtTreePropertyBrowser</name>
<message>
<location filename="../tools/shared/qtpropertybrowser/qttreepropertybrowser.cpp" line="+442"/>
<source>Property</source>
<translation>属性</translation>
</message>
<message>
<location line="+1"/>
<source>Value</source>
<translation>值</translation>
</message>
</context>
<context>
<name>SaveFormAsTemplate</name>
<message>
<location filename="../tools/designer/src/designer/saveformastemplate.cpp" line="+72"/>
<source>Add path...</source>
<translation>添加路径...</translation>
</message>
<message>
<location line="+23"/>
<source>Template Exists</source>
<translation>模板已存在</translation>
</message>
<message>
<location line="+4"/>
<source>Overwrite Template</source>
<translation>覆盖模板</translation>
</message>
<message>
<location line="+7"/>
<source>Open Error</source>
<translation>打开错误</translation>
</message>
<message>
<location line="+1"/>
<source>There was an error opening template %1 for writing. Reason: %2</source>
<translation>在写打开模板%1时发生错误。原因：%2</translation>
</message>
<message>
<location line="+13"/>
<source>Write Error</source>
<translation>写错误</translation>
</message>
<message>
<location line="+1"/>
<source>There was an error writing the template %1 to disk. Reason: %2</source>
<translation>在把模板%1写入磁盘的时候发生错误。原因：%2</translation>
</message>
<message>
<location line="+27"/>
<source>Pick a directory to save templates in</source>
<translation>选择一个用于保存模板的目录</translation>
</message>
<message>
<location filename="../tools/designer/src/designer/saveformastemplate.ui"/>
<source>&Category:</source>
<translation>分类(&C)：</translation>
</message>
<message>
<location/>
<source>&Name:</source>
<translation>名称(&N)：</translation>
</message>
<message>
<location filename="../tools/designer/src/designer/saveformastemplate.cpp" line="-52"/>
<source>A template with the name %1 already exists.
Do you want overwrite the template?</source>
<translation>名称为%1的模板已经存在。
您想要覆盖这个模板么？</translation>
</message>
<message>
<location filename="../tools/designer/src/designer/saveformastemplate.ui"/>
<source>Save Form As Template</source>
<translation>把窗体另存为模板</translation>
</message>
</context>
<context>
<name>ScriptErrorDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/scripterrordialog.cpp" line="+63"/>
<source>An error occurred while running the scripts for "%1":
</source>
<translation>在运行“%1”的脚本过程中发生一个错误：
</translation>
</message>
</context>
<context>
<name>SelectSignalDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/selectsignaldialog.ui"/>
<source>Go to slot</source>
<translation>转到槽</translation>
</message>
<message>
<location/>
<source>Select signal</source>
<translation>选择信号</translation>
</message>
<message>
<location/>
<source>signal</source>
<translation type="unfinished"></translation>
</message>
<message>
<location/>
<source>class</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SignalSlotConnection</name>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/signalsloteditor.cpp" line="-358"/>
<source>SENDER(%1), SIGNAL(%2), RECEIVER(%3), SLOT(%4)</source>
<translation>SENDER(%1), SIGNAL(%2), RECEIVER(%3), SLOT(%4)</translation>
</message>
</context>
<context>
<name>SignalSlotDialogClass</name>
<message>
<location filename="../tools/designer/src/lib/shared/signalslotdialog.ui"/>
<source>Signals and slots</source>
<translation>信号和槽</translation>
</message>
<message>
<location/>
<source>Slots</source>
<translation>槽</translation>
</message>
<message>
<location/>
<source>Add</source>
<translation>添加</translation>
</message>
<message>
<location/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location/>
<source>Signals</source>
<translation>信号</translation>
</message>
</context>
<context>
<name>Spacer</name>
<message>
<location filename="../tools/designer/src/lib/shared/spacer_widget.cpp" line="+275"/>
<source>Horizontal Spacer '%1', %2 x %3</source>
<translation>水平间隔器“%1”，%2 x %3</translation>
</message>
<message>
<location line="+0"/>
<source>Vertical Spacer '%1', %2 x %3</source>
<translation>垂直间隔器“%1”，%2 x %3</translation>
</message>
</context>
<context>
<name>TemplateOptionsPage</name>
<message>
<location filename="../tools/designer/src/components/formeditor/templateoptionspage.cpp" line="+156"/>
<source>Template Paths</source>
<extracomment>Tab in preferences dialog</extracomment>
<translation>模板路径</translation>
</message>
</context>
<context>
<name>ToolBarManager</name>
<message>
<location filename="../tools/designer/src/designer/mainwindow.cpp" line="+89"/>
<source>Configure Toolbars...</source>
<translation>配置工具栏...</translation>
</message>
<message>
<location line="+15"/>
<source>Window</source>
<translation>窗口</translation>
</message>
<message>
<location line="+1"/>
<source>Help</source>
<translation>帮助</translation>
</message>
<message>
<location line="+7"/>
<source>Style</source>
<translation>风格</translation>
</message>
<message>
<location line="+2"/>
<source>Dock views</source>
<translation>锚接视图</translation>
</message>
<message>
<location line="+6"/>
<source>Toolbars</source>
<translation>工具栏</translation>
</message>
</context>
<context>
<name>VersionDialog</name>
<message>
<location filename="../tools/designer/src/designer/versiondialog.cpp" line="+172"/>
<source>Qt Designer</source>
<translation>Qt 设计师</translation>
</message>
<message>
<location line="-1"/>
<source><h3>%1</h3><br/><br/>Version %2</source>
<translation><h3>%1</h3><br/><br/>版本 %2</translation>
</message>
<message>
<source> Open Source Edition</source>
<translation type="obsolete"> 开源版本</translation>
</message>
<message>
<location line="+2"/>
<source><br/>Qt Designer is a graphical user interface designer for Qt applications.<br/></source>
<translation><br/>Qt 设计师是用于开发 Qt 应用程序的图形用户界面设计师。<br/></translation>
</message>
<message>
<source>This program is licensed to you under the terms of the Qt Commercial License Agreement. For details, see the file LICENSE that came with this software distribution.<br/></source>
<translation type="obsolete">我们已经允许您在 Qt 商业许可协议下使用本程序。有关细节，请阅读本软件发行中所带的 LICENSE 文件。</translation>
</message>
<message>
<location line="+5"/>
<source>%1<br/>%2<br/>Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).<br/><br/>The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.<br/> </source>
<translation>%1<br/>%2<br/>版权所有 2009 Nokia Corporation and/or its subsidiary(-ies)。所有权利已被保留。<br/><br/>本程序是在<b>没有任何担保（其中包括任何特定目的的设计、商业和适当性的担保）</b>的条件下提供的。<br/> </translation>
</message>
<message>
<source>This version of Qt Designer is part of the Qt Open Source Edition, for use in the development of Open Source applications. Qt is a comprehensive C++ framework for cross-platform application development.<br/><br/>You need a commercial Qt license for development of proprietary (closed source) applications. Please see <a href="http://qt.nokia.com/company/about/businessmodel">http://qt.nokia.com/company/about/businessmodel.html</a> for an overview of Qt licensing.<br/></source>
<translation type="obsolete">这个版本的 Qt 设计师是 Qt 开源版本的一部分，用于开发开源应用程序。Qt 是一个用于跨平台应用程序开发的综合 C++ 框架。<br/><br/>开发商业（闭源）应用程序，您需要商业 Qt 许可。对于 Qt 许可的概览，请参考<tt>http://qt.nokia.com/company/about/businessmodel</tt>。</translation>
</message>
<message>
<source>This program is licensed to you under the terms of the Qt %1 License Agreement. For details, see the license file that came with this software distribution.<br/></source>
<translation type="obsolete">我们已经允许您在 Qt %1 许可协议下使用本程序。有关细节，请阅读本软件发行中所带的许可协议文件。</translation>
</message>
</context>
<context>
<name>WidgetDataBase</name>
<message>
<location filename="../tools/designer/src/lib/shared/widgetdatabase.cpp" line="+814"/>
<source>The file contains a custom widget '%1' whose base class (%2) differs from the current entry in the widget database (%3). The widget database is left unchanged.</source>
<translation>这个文件包含了一个自定义窗口部件“%1”，其基类(%2)和窗口部件数据库(%3)的当前条目不同。这个窗口部件数据库并未做任何改动。</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ActionEditor</name>
<message>
<location filename="../tools/designer/src/lib/shared/actioneditor.cpp" line="+143"/>
<source>Actions</source>
<translation>动作</translation>
</message>
<message>
<location line="-16"/>
<source>New...</source>
<translation>新建...</translation>
</message>
<message>
<location line="+7"/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location line="+307"/>
<source>New action</source>
<translation>新建动作</translation>
</message>
<message>
<location line="+98"/>
<source>Edit action</source>
<translation>编辑动作</translation>
</message>
<message>
<location line="-411"/>
<source>Edit...</source>
<translation>编辑...</translation>
</message>
<message>
<location line="+1"/>
<source>Go to slot...</source>
<translation type="unfinished">转到槽...</translation>
</message>
<message>
<location line="+1"/>
<source>Copy</source>
<translation>复制</translation>
</message>
<message>
<location line="+1"/>
<source>Cut</source>
<translation>剪切</translation>
</message>
<message>
<location line="+1"/>
<source>Paste</source>
<translation>粘贴</translation>
</message>
<message>
<location line="+1"/>
<source>Select all</source>
<translation>选择全部</translation>
</message>
<message>
<location line="+54"/>
<source>Configure Action Editor</source>
<translation>配置动作编辑器</translation>
</message>
<message>
<location line="+3"/>
<source>Icon View</source>
<translation>图标视图</translation>
</message>
<message>
<location line="+6"/>
<source>Detailed View</source>
<translation>细节视图</translation>
</message>
<message>
<location line="+412"/>
<source>Remove actions</source>
<translation>移除动作</translation>
</message>
<message>
<location line="+0"/>
<source>Remove action '%1'</source>
<translation>移除动作“%1”</translation>
</message>
<message>
<location line="+186"/>
<source>Used In</source>
<translation>用于</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ActionFilterWidget</name>
<message>
<source>Filter: </source>
<translation type="obsolete">过滤器： </translation>
</message>
</context>
<context>
<name>qdesigner_internal::ActionModel</name>
<message>
<location filename="../tools/designer/src/lib/shared/actionrepository.cpp" line="+95"/>
<source>Name</source>
<translation>名称</translation>
</message>
<message>
<location line="+1"/>
<source>Used</source>
<translation>使用</translation>
</message>
<message>
<location line="+1"/>
<source>Text</source>
<translation>文本</translation>
</message>
<message>
<location line="+1"/>
<source>Shortcut</source>
<translation>快捷键</translation>
</message>
<message>
<location line="+1"/>
<source>Checkable</source>
<translation>可选的</translation>
</message>
<message>
<location line="+1"/>
<source>ToolTip</source>
<translation>工具提示</translation>
</message>
</context>
<context>
<name>qdesigner_internal::BuddyEditor</name>
<message>
<location filename="../tools/designer/src/components/buddyeditor/buddyeditor.cpp" line="+265"/>
<source>Add buddy</source>
<translation>添加伙伴</translation>
</message>
<message>
<location line="+52"/>
<source>Remove buddies</source>
<translation>移除伙伴</translation>
</message>
<message numerus="yes">
<location line="+24"/>
<source>Remove %n buddies</source>
<translation>
<numerusform>移除 %n 个伙伴</numerusform>
</translation>
</message>
<message numerus="yes">
<location line="+51"/>
<source>Add %n buddies</source>
<translation>
<numerusform>添加 %n 个伙伴</numerusform>
</translation>
</message>
<message>
<location line="+47"/>
<source>Set automatically</source>
<translation>自动设置</translation>
</message>
</context>
<context>
<name>qdesigner_internal::BuddyEditorPlugin</name>
<message>
<location filename="../tools/designer/src/components/buddyeditor/buddyeditor_plugin.cpp" line="+77"/>
<source>Edit Buddies</source>
<translation>编辑伙伴</translation>
</message>
</context>
<context>
<name>qdesigner_internal::BuddyEditorTool</name>
<message>
<location filename="../tools/designer/src/components/buddyeditor/buddyeditor_tool.cpp" line="+60"/>
<source>Edit Buddies</source>
<translation>编辑伙伴</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ButtonGroupMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/button_taskmenu.cpp" line="+7"/>
<source>Select members</source>
<translation>选择成员</translation>
</message>
<message>
<location line="+1"/>
<source>Break</source>
<translation>打断</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ButtonTaskMenu</name>
<message>
<location line="+121"/>
<source>Assign to button group</source>
<translation>指定到按钮组</translation>
</message>
<message>
<location line="+2"/>
<source>Button group</source>
<translation>按钮组</translation>
</message>
<message>
<location line="+1"/>
<source>New button group</source>
<translation>新建按钮组</translation>
</message>
<message>
<location line="+1"/>
<source>Change text...</source>
<translation>改变文本...</translation>
</message>
<message>
<location line="+1"/>
<source>None</source>
<translation>无</translation>
</message>
<message>
<location line="+101"/>
<source>Button group '%1'</source>
<translation>按钮组“%1”</translation>
</message>
</context>
<context>
<name>qdesigner_internal::CodeDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/codedialog.cpp" line="+99"/>
<source>Save...</source>
<translation>保存...</translation>
</message>
<message>
<location line="+4"/>
<source>Copy All</source>
<translation>复制全部</translation>
</message>
<message>
<location line="+5"/>
<source>&Find in Text...</source>
<translation>在文本中查找(&F)...</translation>
</message>
<message>
<location line="+75"/>
<source>A temporary form file could not be created in %1.</source>
<translation>无法在 %1 中创建临时窗体文件。</translation>
</message>
<message>
<location line="+6"/>
<source>The temporary form file %1 could not be written.</source>
<translation>无法写入临时窗体文件 %1。</translation>
</message>
<message>
<location line="+21"/>
<source>%1 - [Code]</source>
<translation>%1 - [Code]</translation>
</message>
<message>
<location line="+23"/>
<source>Save Code</source>
<translation>保存代码</translation>
</message>
<message>
<location line="+0"/>
<source>Header Files (*.%1)</source>
<translation>头文件 (*.%1)</translation>
</message>
<message>
<location line="+6"/>
<source>The file %1 could not be opened: %2</source>
<translation>无法打开文件 %1：%2</translation>
</message>
<message>
<location line="+5"/>
<source>The file %1 could not be written: %2</source>
<translation>无法写入文件 %1：%2</translation>
</message>
<message>
<location line="+11"/>
<source>%1 - Error</source>
<translation>%1 - 错误</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ColorAction</name>
<message>
<location filename="../tools/designer/src/lib/shared/richtexteditor.cpp" line="+250"/>
<source>Text Color</source>
<translation>文本颜色</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ComboBoxTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/combobox_taskmenu.cpp" line="+72"/>
<source>Edit Items...</source>
<translation>编辑项目...</translation>
</message>
<message>
<location line="+38"/>
<source>Change Combobox Contents</source>
<translation>改变组合框内容</translation>
</message>
</context>
<context>
<name>qdesigner_internal::CommandLinkButtonTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/button_taskmenu.cpp" line="+156"/>
<source>Change description...</source>
<translation>改变描述...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ConnectionEdit</name>
<message>
<location filename="../tools/designer/src/lib/shared/connectionedit.cpp" line="+1313"/>
<source>Select All</source>
<translation>选择全部</translation>
</message>
<message>
<location line="+3"/>
<source>Deselect All</source>
<translation>取消选择全部</translation>
</message>
<message>
<location line="+5"/>
<source>Delete</source>
<translation>删除</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ConnectionModel</name>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/signalsloteditorwindow.cpp" line="-465"/>
<source>Sender</source>
<translation>发送者</translation>
</message>
<message>
<location line="+1"/>
<source>Signal</source>
<translation>信号</translation>
</message>
<message>
<location line="+1"/>
<source>Receiver</source>
<translation>接收者</translation>
</message>
<message>
<location line="+1"/>
<source>Slot</source>
<translation>槽</translation>
</message>
<message>
<location line="+90"/>
<source><sender></source>
<translation><发送者></translation>
</message>
<message>
<location line="+1"/>
<source><signal></source>
<translation><信号></translation>
</message>
<message>
<location line="+1"/>
<source><receiver></source>
<translation><接收者></translation>
</message>
<message>
<location line="+1"/>
<source><slot></source>
<translation><槽></translation>
</message>
<message>
<location line="+110"/>
<source>Signal and Slot Editor</source>
<translation>信号和槽编辑器</translation>
</message>
<message>
<location line="-2"/>
<source>The connection already exists!<br>%1</source>
<translation>这个连接已经存在！<br>%1</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ContainerWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/containerwidget_taskmenu.cpp" line="+112"/>
<source>Insert Page Before Current Page</source>
<translation>在当前页之前插入页</translation>
</message>
<message>
<location line="+4"/>
<source>Insert Page After Current Page</source>
<translation>在当前页之后插入页</translation>
</message>
<message>
<location line="-32"/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location line="+25"/>
<source>Insert</source>
<translation>插入</translation>
</message>
<message>
<location line="+15"/>
<source>Add Subwindow</source>
<translation>添加子窗口</translation>
</message>
<message>
<location line="+38"/>
<source>Subwindow</source>
<translation>子窗口</translation>
</message>
<message>
<location line="+2"/>
<source>Page</source>
<translation>页</translation>
</message>
<message>
<location line="+1"/>
<source>Page %1 of %2</source>
<translation>%2 的页 %1</translation>
</message>
</context>
<context>
<name>qdesigner_internal::DPI_Chooser</name>
<message>
<location filename="../tools/designer/src/components/formeditor/dpi_chooser.cpp" line="+27"/>
<source>System (%1 x %2)</source>
<extracomment>System resolution</extracomment>
<translation>系统(%1 x %2)</translation>
</message>
<message>
<location line="+7"/>
<source>User defined</source>
<translation>用户定义</translation>
</message>
<message>
<location line="+18"/>
<source> x </source>
<extracomment>DPI X/Y separator</extracomment>
<translation> x </translation>
</message>
</context>
<context>
<name>qdesigner_internal::DesignerPropertyManager</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/designerpropertymanager.cpp" line="+644"/>
<location line="+6"/>
<source>AlignLeft</source>
<translation>AlignLeft</translation>
</message>
<message>
<location line="-5"/>
<source>AlignHCenter</source>
<translation>AlignHCenter</translation>
</message>
<message>
<location line="+1"/>
<source>AlignRight</source>
<translation>AlignRight</translation>
</message>
<message>
<location line="+1"/>
<source>AlignJustify</source>
<translation>AlignJustify</translation>
</message>
<message>
<location line="+9"/>
<source>AlignTop</source>
<translation>AlignTop</translation>
</message>
<message>
<location line="+1"/>
<location line="+4"/>
<source>AlignVCenter</source>
<translation>AlignVCenter</translation>
</message>
<message>
<location line="-3"/>
<source>AlignBottom</source>
<translation>AlignBottom</translation>
</message>
<message>
<source>PreferDefault</source>
<translation type="obsolete">首选默认</translation>
</message>
<message>
<source>NoAntialias</source>
<translation type="obsolete">无反锯齿</translation>
</message>
<message>
<source>PreferAntialias</source>
<translation type="obsolete">首选反锯齿</translation>
</message>
<message>
<location line="+565"/>
<source>%1, %2</source>
<translation>%1, %2</translation>
</message>
<message numerus="yes">
<location line="+6"/>
<source>Customized (%n roles)</source>
<translation>
<numerusform>自定义的(%n 个角色)</numerusform>
</translation>
</message>
<message>
<location line="+1"/>
<source>Inherited</source>
<translation>继承</translation>
</message>
<message>
<location line="+566"/>
<source>Horizontal</source>
<translation>水平的</translation>
</message>
<message>
<location line="+9"/>
<source>Vertical</source>
<translation>垂直的</translation>
</message>
<message>
<location line="+15"/>
<source>Normal Off</source>
<translation>Normal Off</translation>
</message>
<message>
<location line="+1"/>
<source>Normal On</source>
<translation>Normal On</translation>
</message>
<message>
<location line="+1"/>
<source>Disabled Off</source>
<translation>Disabled Off</translation>
</message>
<message>
<location line="+1"/>
<source>Disabled On</source>
<translation>Disabled On</translation>
</message>
<message>
<location line="+1"/>
<source>Active Off</source>
<translation>Active Off</translation>
</message>
<message>
<location line="+1"/>
<source>Active On</source>
<translation>Active On</translation>
</message>
<message>
<location line="+1"/>
<source>Selected Off</source>
<translation>Selected Off</translation>
</message>
<message>
<location line="+1"/>
<source>Selected On</source>
<translation>Selected On</translation>
</message>
<message>
<location line="+7"/>
<location line="+21"/>
<source>translatable</source>
<translation>可翻译的</translation>
</message>
<message>
<location line="-15"/>
<location line="+21"/>
<source>disambiguation</source>
<translation>澄清</translation>
</message>
<message>
<location line="-15"/>
<location line="+21"/>
<source>comment</source>
<translation>注释</translation>
</message>
<message>
<source>Antialiasing</source>
<translation type="obsolete">反锯齿</translation>
</message>
</context>
<context>
<name>qdesigner_internal::DeviceProfileDialog</name>
<message>
<location filename="../tools/designer/src/components/formeditor/deviceprofiledialog.cpp" line="+63"/>
<source>Device Profiles (*.%1)</source>
<translation>设备描述文件(*.%1)</translation>
</message>
<message>
<location line="+31"/>
<source>Default</source>
<translation>默认</translation>
</message>
<message>
<location line="+67"/>
<source>Save Profile</source>
<translation>保存描述文件</translation>
</message>
<message>
<location line="+10"/>
<source>Save Profile - Error</source>
<translation>保存描述文件 - 错误</translation>
</message>
<message>
<location line="+0"/>
<source>Unable to open the file '%1' for writing: %2</source>
<translation>无法打开文件“%1”用于写入：%2</translation>
</message>
<message>
<location line="+8"/>
<source>Open profile</source>
<translation>打开描述文件</translation>
</message>
<message>
<location line="+6"/>
<location line="+6"/>
<source>Open Profile - Error</source>
<translation>打开描述文件 - 错误</translation>
</message>
<message>
<location line="-6"/>
<source>Unable to open the file '%1' for reading: %2</source>
<translation>无法打开文件“%1”用于读取：%2</translation>
</message>
<message>
<location line="+6"/>
<source>'%1' is not a valid profile: %2</source>
<translation>“%1”不是有效的描述文件：%2</translation>
</message>
</context>
<context>
<name>qdesigner_internal::Dialog</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/stringlisteditor.ui"/>
<source>Dialog</source>
<translation>对话框</translation>
</message>
<message>
<location/>
<source>StringList</source>
<translation>字符串列表</translation>
</message>
<message>
<location/>
<source>New String</source>
<translation>新建字符串</translation>
</message>
<message>
<location/>
<source>&New</source>
<translation>新建(&N)</translation>
</message>
<message>
<location/>
<source>Delete String</source>
<translation>删除字符串</translation>
</message>
<message>
<location/>
<source>&Delete</source>
<translation>删除(&D)</translation>
</message>
<message>
<location/>
<source>&Value:</source>
<translation>值(&V)：</translation>
</message>
<message>
<location/>
<source>Move String Up</source>
<translation>向上移动字符串</translation>
</message>
<message>
<location/>
<source>Up</source>
<translation>向上</translation>
</message>
<message>
<location/>
<source>Move String Down</source>
<translation>向下移动字符串</translation>
</message>
<message>
<location/>
<source>Down</source>
<translation>向下</translation>
</message>
</context>
<context>
<name>qdesigner_internal::EmbeddedOptionsControl</name>
<message>
<location filename="../tools/designer/src/components/formeditor/embeddedoptionspage.cpp" line="-256"/>
<source>Add a profile</source>
<translation type="unfinished">添加描述文件</translation>
</message>
<message>
<location line="+6"/>
<source>Edit the selected profile</source>
<translation type="unfinished">编辑选中的描述文件</translation>
</message>
<message>
<location line="+4"/>
<source>Delete the selected profile</source>
<translation type="unfinished">删除选中的描述文件</translation>
</message>
<message>
<location line="+22"/>
<source>Add Profile</source>
<translation type="unfinished">添加描述文件</translation>
</message>
<message>
<location line="+7"/>
<source>New profile</source>
<translation type="unfinished">新建描述文件</translation>
</message>
<message>
<location line="+35"/>
<source>Edit Profile</source>
<translation type="unfinished">编辑描述文件</translation>
</message>
<message>
<location line="+26"/>
<source>Delete Profile</source>
<translation type="unfinished">删除描述文件</translation>
</message>
<message>
<location line="+1"/>
<source>Would you like to delete the profile '%1'?</source>
<translation type="unfinished">你要删除描述文件“%1”吗？</translation>
</message>
<message>
<location line="+55"/>
<source>Default</source>
<translation type="unfinished">默认</translation>
</message>
<message>
<location line="-160"/>
<source>None</source>
<translation type="unfinished">无</translation>
</message>
</context>
<context>
<name>qdesigner_internal::FilterWidget</name>
<message>
<location filename="../tools/designer/src/lib/shared/filterwidget.cpp" line="+185"/>
<source><Filter></source>
<translation><过滤器></translation>
</message>
</context>
<context>
<name>qdesigner_internal::FormEditor</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formeditor.cpp" line="+190"/>
<source>Resource File Changed</source>
<translation>资源文件已改变</translation>
</message>
<message>
<location line="+1"/>
<source>The file "%1" has changed outside Designer. Do you want to reload it?</source>
<translation>文件“%1”已经在设计师之外被改动。您要重新加载么？</translation>
</message>
</context>
<context>
<name>qdesigner_internal::FormLayoutMenu</name>
<message>
<location filename="../tools/designer/src/lib/shared/formlayoutmenu.cpp" line="+24"/>
<source>Add form layout row...</source>
<translation>添加窗体布局行...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::FormWindow</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formwindow.cpp" line="-1267"/>
<source>Edit contents</source>
<translation>编辑内容</translation>
</message>
<message>
<location line="+1"/>
<source>F2</source>
<translation>F2</translation>
</message>
<message>
<source>Insert widget '%1</source>
<translation type="obsolete">插入窗口部件%1</translation>
</message>
<message>
<location line="+841"/>
<source>Resize</source>
<translation>重定义大小</translation>
</message>
<message>
<location line="+218"/>
<location line="+15"/>
<source>Key Move</source>
<translation>键移动</translation>
</message>
<message>
<location line="+270"/>
<source>Cannot paste widgets. Designer could not find a container without a layout to paste into.</source>
<translation>无法粘贴窗口部件。设计师找不到一个没有布局的容器来包含它。</translation>
</message>
<message>
<location line="+2"/>
<source>Break the layout of the container you want to paste into, select this container and then paste again.</source>
<translation>请先打破您所要贴入的容器的布局，再选择该容器，并且重新贴入。</translation>
</message>
<message>
<location line="+4"/>
<source>Paste error</source>
<translation>粘贴错误</translation>
</message>
<message>
<source>Can't paste widgets. Designer couldn't find a container
to paste into which does not contain a layout. Break the layout
of the container you want to paste into and select this container
and then paste again.</source>
<translation type="obsolete">不能粘贴窗口部件。设计师不能找到一个没有包含布局的
容器来粘贴它们。请打破你想要把它们粘贴进去的容器
的布局并且选择这个容器然后再次粘贴。</translation>
</message>
<message>
<source>Break layout</source>
<translation type="obsolete">打破布局</translation>
</message>
<message>
<location line="+442"/>
<source>Lay out</source>
<translation>布局</translation>
</message>
<message>
<location line="+493"/>
<location line="+55"/>
<source>Drop widget</source>
<translation>丢弃窗口部件</translation>
</message>
<message numerus="yes">
<location line="-1055"/>
<source>Paste %n action(s)</source>
<translation>
<numerusform>粘贴 %n 个动作</numerusform>
</translation>
</message>
<message>
<location line="-511"/>
<source>Insert widget '%1'</source>
<translation>插入窗口部件“%1”</translation>
</message>
<message numerus="yes">
<location line="+513"/>
<source>Paste %n widget(s)</source>
<translation>
<numerusform>粘贴 %n 个窗口部件</numerusform>
</translation>
</message>
<message>
<location line="+1"/>
<source>Paste (%1 widgets, %2 actions)</source>
<translation>粘贴(%1 个窗口部件，%2 个动作)</translation>
</message>
<message>
<location line="+245"/>
<source>Raise widgets</source>
<translation>上升窗口部件</translation>
</message>
<message>
<location line="+17"/>
<source>Lower widgets</source>
<translation>下降窗口部件</translation>
</message>
<message>
<location line="+201"/>
<source>Select Ancestor</source>
<translation>选择祖先</translation>
</message>
<message>
<location line="+576"/>
<source>A QMainWindow-based form does not contain a central widget.</source>
<translation>一个基于 QMainWindow 的窗体没有包含中央窗口部件。</translation>
</message>
</context>
<context>
<name>qdesigner_internal::FormWindowBase</name>
<message>
<location filename="../tools/designer/src/lib/shared/formwindowbase.cpp" line="+397"/>
<source>Delete</source>
<translation>删除</translation>
</message>
<message>
<location line="+0"/>
<source>Delete '%1'</source>
<translation>删除“%1”</translation>
</message>
</context>
<context>
<name>qdesigner_internal::FormWindowManager</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formwindowmanager.cpp" line="+368"/>
<source>Cu&t</source>
<translation>剪切(&T)</translation>
</message>
<message>
<location line="+3"/>
<source>Cuts the selected widgets and puts them on the clipboard</source>
<translation>剪切选中的窗口部件并且把它们放到剪贴板中</translation>
</message>
<message>
<location line="+5"/>
<source>&Copy</source>
<translation>复制(&C)</translation>
</message>
<message>
<location line="+3"/>
<source>Copies the selected widgets to the clipboard</source>
<translation>复制选中的窗口部件到剪贴板</translation>
</message>
<message>
<location line="+5"/>
<source>&Paste</source>
<translation>粘贴(&P)</translation>
</message>
<message>
<location line="+3"/>
<source>Pastes the clipboard's contents</source>
<translation>粘贴剪贴版的内容</translation>
</message>
<message>
<location line="+5"/>
<source>&Delete</source>
<translation>删除(&D)</translation>
</message>
<message>
<location line="+2"/>
<source>Deletes the selected widgets</source>
<translation>删除选中的窗口部件</translation>
</message>
<message>
<location line="+5"/>
<source>Select &All</source>
<translation>选择全部(&A)</translation>
</message>
<message>
<location line="+3"/>
<source>Selects all widgets</source>
<translation>选择所有窗口部件</translation>
</message>
<message>
<location line="+5"/>
<source>Bring to &Front</source>
<translation>放到前面(&F)</translation>
</message>
<message>
<location line="+3"/>
<location line="+1"/>
<source>Raises the selected widgets</source>
<translation>上升选中的窗口部件</translation>
</message>
<message>
<location line="+4"/>
<source>Send to &Back</source>
<translation>放到后面(&B)</translation>
</message>
<message>
<location line="+3"/>
<location line="+1"/>
<source>Lowers the selected widgets</source>
<translation>下降选中的窗口部件</translation>
</message>
<message>
<location line="+4"/>
<source>Adjust &Size</source>
<translation>调整大小(&S)</translation>
</message>
<message>
<location line="+3"/>
<source>Adjusts the size of the selected widget</source>
<translation>调整选中的窗口部件的大小</translation>
</message>
<message>
<location line="+6"/>
<source>Lay Out &Horizontally</source>
<translation>水平布局(&H)</translation>
</message>
<message>
<location line="+3"/>
<source>Lays out the selected widgets horizontally</source>
<translation>水平布局选中的窗口部件</translation>
</message>
<message>
<location line="+6"/>
<source>Lay Out &Vertically</source>
<translation>垂直布局(&V)</translation>
</message>
<message>
<location line="+3"/>
<source>Lays out the selected widgets vertically</source>
<translation>垂直布局选中的窗口部件</translation>
</message>
<message>
<location line="+16"/>
<source>Lay Out in a &Grid</source>
<translation>栅格布局(&G)</translation>
</message>
<message>
<location line="+3"/>
<source>Lays out the selected widgets in a grid</source>
<translation>栅格布局选中的窗口部件</translation>
</message>
<message>
<location line="+7"/>
<source>Lay Out Horizontally in S&plitter</source>
<translation>使用分裂器水平布局(&P)</translation>
</message>
<message>
<location line="+3"/>
<source>Lays out the selected widgets horizontally in a splitter</source>
<translation>在一个分裂器中水平布局选中的窗口部件</translation>
</message>
<message>
<location line="+7"/>
<source>Lay Out Vertically in Sp&litter</source>
<translation>使用分裂器垂直布局(&L)</translation>
</message>
<message>
<location line="+3"/>
<source>Lays out the selected widgets vertically in a splitter</source>
<translation>在一个分裂器中垂直布局选中的窗口部件</translation>
</message>
<message>
<location line="+7"/>
<source>&Break Layout</source>
<translation>打破布局(&B)</translation>
</message>
<message>
<location line="+3"/>
<source>Breaks the selected layout</source>
<translation>打破所选的布局</translation>
</message>
<message>
<location line="+13"/>
<source>&Preview...</source>
<translation>预览(&P)...</translation>
</message>
<message>
<location line="+2"/>
<source>Preview current form</source>
<translation>预览当前窗体</translation>
</message>
<message>
<location line="+14"/>
<source>Form &Settings...</source>
<translation>窗体设定(&S)...</translation>
</message>
<message>
<location line="+78"/>
<source>Break Layout</source>
<translation>打破布局</translation>
</message>
<message>
<location line="+26"/>
<source>Adjust Size</source>
<translation>调整大小</translation>
</message>
<message>
<location line="+43"/>
<source>Could not create form preview</source>
<comment>Title of warning message box</comment>
<translation>无法创建窗体预览</translation>
</message>
<message>
<location line="+341"/>
<source>Form Settings - %1</source>
<translation>窗体设定 - %1</translation>
</message>
<message>
<location line="-560"/>
<source>Lay Out in a &Form Layout</source>
<translation>在窗体布局中布局(&F)</translation>
</message>
<message>
<location line="+3"/>
<source>Lays out the selected widgets in a form layout</source>
<translation>在一个窗体布局中布局选中的窗口部件</translation>
</message>
<message>
<location line="+45"/>
<source>Si&mplify Grid Layout</source>
<translation>简易网格布局(&M)</translation>
</message>
<message>
<location line="+2"/>
<source>Removes empty columns and rows</source>
<translation>移除空白行和列</translation>
</message>
</context>
<context>
<name>qdesigner_internal::FormWindowSettings</name>
<message>
<location filename="../tools/designer/src/components/formeditor/formwindowsettings.cpp" line="+193"/>
<source>None</source>
<translation>无</translation>
</message>
<message>
<location line="+1"/>
<source>Device Profile: %1</source>
<translation>设备描述文件：%1</translation>
</message>
</context>
<context>
<name>qdesigner_internal::GridPanel</name>
<message>
<location filename="../tools/designer/src/lib/shared/gridpanel.ui"/>
<source>Visible</source>
<translation>可见的</translation>
</message>
<message>
<location/>
<source>Snap</source>
<translation>贴齐</translation>
</message>
<message>
<location/>
<source>Reset</source>
<translation>重置</translation>
</message>
<message>
<location/>
<source>Form</source>
<translation>窗体</translation>
</message>
<message>
<location/>
<source>Grid</source>
<translation>栅格</translation>
</message>
<message>
<location/>
<source>Grid &X</source>
<translation>栅格 &X</translation>
</message>
<message>
<location/>
<source>Grid &Y</source>
<translation>栅格 &Y</translation>
</message>
</context>
<context>
<name>qdesigner_internal::GroupBoxTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/groupbox_taskmenu.cpp" line="+86"/>
<source>Change title...</source>
<translation>改变标题...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::HtmlTextEdit</name>
<message>
<location filename="../tools/designer/src/lib/shared/richtexteditor.cpp" line="-58"/>
<source>Insert HTML entity</source>
<translation>插入 HTML 条目</translation>
</message>
</context>
<context>
<name>qdesigner_internal::IconSelector</name>
<message>
<location filename="../tools/designer/src/lib/shared/iconselector.cpp" line="+211"/>
<source>The pixmap file '%1' cannot be read.</source>
<translation>无法读取像素映射文件“%1”。</translation>
</message>
<message>
<location line="+6"/>
<source>The file '%1' does not appear to be a valid pixmap file: %2</source>
<translation>文件“%1”不像是有效的像素映射文件：%2</translation>
</message>
<message>
<location line="+9"/>
<source>The file '%1' could not be read: %2</source>
<translation>无法读取文件“%1”：%2</translation>
</message>
<message>
<location line="+33"/>
<source>Choose a Pixmap</source>
<translation>选择一个像素映射</translation>
</message>
<message>
<location line="+7"/>
<source>Pixmap Read Error</source>
<translation>像素映射读取错误</translation>
</message>
<message>
<location line="+55"/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location line="+6"/>
<source>Normal Off</source>
<translation>Normal Off</translation>
</message>
<message>
<location line="+1"/>
<source>Normal On</source>
<translation>Normal On</translation>
</message>
<message>
<location line="+1"/>
<source>Disabled Off</source>
<translation>Disabled Off</translation>
</message>
<message>
<location line="+1"/>
<source>Disabled On</source>
<translation>Disabled On</translation>
</message>
<message>
<location line="+1"/>
<source>Active Off</source>
<translation>Active Off</translation>
</message>
<message>
<location line="+1"/>
<source>Active On</source>
<translation>Active On</translation>
</message>
<message>
<location line="+1"/>
<source>Selected Off</source>
<translation>Selected Off</translation>
</message>
<message>
<location line="+1"/>
<source>Selected On</source>
<translation>Selected On</translation>
</message>
<message>
<location line="+8"/>
<source>Choose Resource...</source>
<translation>选择资源...</translation>
</message>
<message>
<location line="+1"/>
<source>Choose File...</source>
<translation>选择文件...</translation>
</message>
<message>
<location line="+1"/>
<source>Reset</source>
<translation>重置</translation>
</message>
<message>
<location line="+1"/>
<source>Reset All</source>
<translation>重置全部</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ItemListEditor</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/itemlisteditor.cpp" line="+358"/>
<source>Properties &<<</source>
<translation>属性&<<</translation>
</message>
<message>
<location line="+2"/>
<location filename="../tools/designer/src/components/taskmenu/itemlisteditor.ui"/>
<source>Properties &>></source>
<translation>属性&>></translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/itemlisteditor.ui"/>
<source>Items List</source>
<translation>项目列表</translation>
</message>
<message>
<location/>
<source>New Item</source>
<translation>新建项目</translation>
</message>
<message>
<location/>
<source>&New</source>
<translation>新建(&N)</translation>
</message>
<message>
<location/>
<source>Delete Item</source>
<translation>删除项目</translation>
</message>
<message>
<location/>
<source>&Delete</source>
<translation>删除(&D)</translation>
</message>
<message>
<location/>
<source>Move Item Up</source>
<translation>向上移动项目</translation>
</message>
<message>
<location/>
<source>U</source>
<translation>U</translation>
</message>
<message>
<location/>
<source>Move Item Down</source>
<translation>向下移动项目</translation>
</message>
<message>
<location/>
<source>D</source>
<translation>D</translation>
</message>
</context>
<context>
<name>qdesigner_internal::LabelTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/label_taskmenu.cpp" line="+89"/>
<source>Change rich text...</source>
<translation>改变多信息文本...</translation>
</message>
<message>
<location line="+1"/>
<source>Change plain text...</source>
<translation>改变普通文本...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::LineEditTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/lineedit_taskmenu.cpp" line="+84"/>
<source>Change text...</source>
<translation>改变文本...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ListWidgetEditor</name>
<message>
<source>Dialog</source>
<translation type="obsolete">对话框</translation>
</message>
<message>
<source>Items List</source>
<translation type="obsolete">项目列表</translation>
</message>
<message>
<source>Move Item Down</source>
<translation type="obsolete">向下移动项目</translation>
</message>
<message>
<source>D</source>
<translation type="obsolete">D</translation>
</message>
<message>
<source>Move Item Up</source>
<translation type="obsolete">向上移动项目</translation>
</message>
<message>
<source>U</source>
<translation type="obsolete">U</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/listwidgeteditor.cpp" line="+73"/>
<source>New Item</source>
<translation>新建项目</translation>
</message>
<message>
<source>Delete Item</source>
<translation type="obsolete">删除项目</translation>
</message>
<message>
<location line="+32"/>
<source>Edit List Widget</source>
<translation>编辑列表窗口部件</translation>
</message>
<message>
<location line="+19"/>
<source>Edit Combobox</source>
<translation>编辑组合框</translation>
</message>
<message>
<source>&New</source>
<translation type="obsolete">新建(&N)</translation>
</message>
<message>
<source>&Delete</source>
<translation type="obsolete">删除(&D)</translation>
</message>
<message>
<source>Icon</source>
<translation type="obsolete">图标</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ListWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/listwidget_taskmenu.cpp" line="+71"/>
<source>Edit Items...</source>
<translation>编辑项目...</translation>
</message>
<message>
<location line="+38"/>
<source>Change List Contents</source>
<translation>改变列表内容</translation>
</message>
</context>
<context>
<name>qdesigner_internal::MdiContainerWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/containerwidget_taskmenu.cpp" line="+118"/>
<source>Next Subwindow</source>
<translation>下一个子窗口</translation>
</message>
<message>
<location line="+1"/>
<source>Previous Subwindow</source>
<translation>上一个子窗口</translation>
</message>
<message>
<location line="+1"/>
<source>Tile</source>
<translation>平铺</translation>
</message>
<message>
<location line="+1"/>
<source>Cascade</source>
<translation>层叠</translation>
</message>
</context>
<context>
<name>qdesigner_internal::MenuTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/menutaskmenu.cpp" line="+60"/>
<source>Remove</source>
<translation>移除</translation>
</message>
</context>
<context>
<name>qdesigner_internal::MorphMenu</name>
<message>
<location filename="../tools/designer/src/lib/shared/morphmenu.cpp" line="+264"/>
<source>Morph into</source>
<translation>变型为</translation>
</message>
</context>
<context>
<name>qdesigner_internal::NewActionDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/newactiondialog.ui"/>
<source>New Action...</source>
<translation>新建动作...</translation>
</message>
<message>
<location/>
<source>&Text:</source>
<translation>文本(&T)：</translation>
</message>
<message>
<location/>
<source>&Icon:</source>
<translation>图标(&I)：</translation>
</message>
<message>
<location/>
<source>Shortcut:</source>
<translation>快捷键：</translation>
</message>
<message>
<location/>
<source>Checkable:</source>
<translation>可选的：</translation>
</message>
<message>
<location/>
<source>ToolTip:</source>
<translation>工具提示：</translation>
</message>
<message>
<location/>
<source>...</source>
<translation>...</translation>
</message>
<message>
<location/>
<source>Object &name:</source>
<translation>对象名称(&N)：</translation>
</message>
</context>
<context>
<name>qdesigner_internal::NewDynamicPropertyDialog</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/newdynamicpropertydialog.cpp" line="+134"/>
<source>Set Property Name</source>
<translation>设置属性名称</translation>
</message>
<message>
<location line="+11"/>
<source>The current object already has a property named '%1'.
Please select another, unique one.</source>
<translation>当前对象已经有一个属性名称为“%1”。
请选择其它的，唯一的。</translation>
</message>
<message>
<location filename="../tools/designer/src/components/propertyeditor/newdynamicpropertydialog.ui"/>
<source>Create Dynamic Property</source>
<translation>创建动态属性</translation>
</message>
<message>
<location/>
<source>Property Name</source>
<translation>属性名称</translation>
</message>
<message>
<location/>
<source>Property Type</source>
<translation>属性类型</translation>
</message>
<message>
<location filename="../tools/designer/src/components/propertyeditor/newdynamicpropertydialog.cpp" line="+4"/>
<source>The '_q_' prefix is reserved for the Qt library.
Please select another name.</source>
<translation>“_q_”前缀已经为 Qt 库保留。请选择其它名称。</translation>
</message>
<message>
<location filename="../tools/designer/src/components/propertyeditor/newdynamicpropertydialog.ui"/>
<source>horizontalSpacer</source>
<translation>水平间隔器</translation>
</message>
</context>
<context>
<name>qdesigner_internal::NewFormWidget</name>
<message>
<location filename="../tools/designer/src/lib/shared/newformwidget.cpp" line="-391"/>
<source>Default size</source>
<translation>默认大小</translation>
</message>
<message>
<location line="+1"/>
<source>QVGA portrait (240x320)</source>
<translation>QVGA 纵向(240x320)</translation>
</message>
<message>
<location line="+1"/>
<source>QVGA landscape (320x240)</source>
<translation>QVGA 横向(320x240)</translation>
</message>
<message>
<location line="+1"/>
<source>VGA portrait (480x640)</source>
<translation>VGA 纵向(480x640)</translation>
</message>
<message>
<location line="+1"/>
<source>VGA landscape (640x480)</source>
<translation>VGA 横向(640x480)</translation>
</message>
<message>
<location line="+66"/>
<source>Widgets</source>
<extracomment>New Form Dialog Categories</extracomment>
<translation>窗口部件</translation>
</message>
<message>
<location line="+1"/>
<source>Custom Widgets</source>
<translation>自定义窗口部件</translation>
</message>
<message>
<location line="+18"/>
<source>None</source>
<translation>无</translation>
</message>
<message>
<location line="+57"/>
<source>Error loading form</source>
<translation>加载窗体错误</translation>
</message>
<message>
<location line="+312"/>
<source>Internal error: No template selected.</source>
<translation>内部错误：没有模板被选中</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/newformwidget.ui"/>
<source>0</source>
<translation>0</translation>
</message>
<message>
<location/>
<source>Choose a template for a preview</source>
<translation>选择一个用于预览的模板</translation>
</message>
<message>
<location/>
<source>Embedded Design</source>
<translation>嵌入式设计</translation>
</message>
<message>
<location/>
<source>Device:</source>
<translation>设备：</translation>
</message>
<message>
<location/>
<source>Screen Size:</source>
<translation>屏幕大小：</translation>
</message>
</context>
<context>
<name>qdesigner_internal::NewPromotedClassPanel</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_promotiondialog.cpp" line="+96"/>
<source>Add</source>
<translation>添加</translation>
</message>
<message>
<location line="+2"/>
<source>New Promoted Class</source>
<translation>新建提升的类</translation>
</message>
<message>
<location line="+15"/>
<source>Base class name:</source>
<translation>基类名称：</translation>
</message>
<message>
<location line="+1"/>
<source>Promoted class name:</source>
<translation>提升的类名称：</translation>
</message>
<message>
<location line="+1"/>
<source>Header file:</source>
<translation>头文件：</translation>
</message>
<message>
<location line="+1"/>
<source>Global include</source>
<translation>全局包含</translation>
</message>
<message>
<location line="+11"/>
<source>Reset</source>
<translation>重置</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ObjectInspector</name>
<message>
<location filename="../tools/designer/src/components/objectinspector/objectinspector.cpp" line="+758"/>
<source>&Find in Text...</source>
<translation>在文本中查找(&F)...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ObjectInspector::ObjectInspectorPrivate</name>
<message>
<location line="-438"/>
<source>Change Current Page</source>
<translation>改变当前页</translation>
</message>
</context>
<context>
<name>qdesigner_internal::OrderDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/orderdialog.cpp" line="+113"/>
<source>Index %1 (%2)</source>
<translation>索引 %1 (%2)</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/orderdialog.ui"/>
<source>Change Page Order</source>
<translation>改变页顺序</translation>
</message>
<message>
<location/>
<source>Page Order</source>
<translation>页顺序</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/orderdialog.cpp" line="+3"/>
<source>%1 %2</source>
<translation>%1 %2</translation>
</message>
<message>
<location filename="../tools/designer/src/lib/shared/orderdialog.ui"/>
<source>Move page up</source>
<translation>向上移动页</translation>
</message>
<message>
<location/>
<source>Move page down</source>
<translation>向下移动页</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PaletteEditor</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/paletteeditor.ui"/>
<source>Edit Palette</source>
<translation>编辑调色板</translation>
</message>
<message>
<location/>
<source>Tune Palette</source>
<translation>曲调调色板</translation>
</message>
<message>
<location/>
<source>Show Details</source>
<translation>显示细节</translation>
</message>
<message>
<location/>
<source>Compute Details</source>
<translation>计算细节</translation>
</message>
<message>
<location/>
<source>Quick</source>
<translation>快速</translation>
</message>
<message>
<location/>
<source>Preview</source>
<translation>预览</translation>
</message>
<message>
<location/>
<source>Disabled</source>
<translation>失效</translation>
</message>
<message>
<location/>
<source>Inactive</source>
<translation>非激活</translation>
</message>
<message>
<location/>
<source>Active</source>
<translation>激活</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PaletteEditorButton</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/paletteeditorbutton.cpp" line="+61"/>
<source>Change Palette</source>
<translation>改变调色板</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PaletteModel</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/paletteeditor.cpp" line="+381"/>
<source>Color Role</source>
<translation>颜色角色</translation>
</message>
<message>
<location line="+2"/>
<source>Active</source>
<translation>激活</translation>
</message>
<message>
<location line="+2"/>
<source>Inactive</source>
<translation>非激活</translation>
</message>
<message>
<location line="+2"/>
<source>Disabled</source>
<translation>失效</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PixmapEditor</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/designerpropertymanager.cpp" line="-1539"/>
<source>Copy Path</source>
<translation>复制路径</translation>
</message>
<message>
<location line="+1"/>
<source>Paste Path</source>
<translation>粘贴路径</translation>
</message>
<message>
<location line="-3"/>
<source>Choose Resource...</source>
<translation>选择资源...</translation>
</message>
<message>
<location line="+1"/>
<source>Choose File...</source>
<translation>选择文件...</translation>
</message>
<message>
<location line="+8"/>
<location line="+16"/>
<source>...</source>
<translation>...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PlainTextEditorDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/plaintexteditor.cpp" line="+69"/>
<source>Edit text</source>
<translation>编辑文本</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PluginDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/plugindialog.cpp" line="+72"/>
<source>Components</source>
<translation>组件</translation>
</message>
<message>
<location line="+13"/>
<source>Plugin Information</source>
<translation>插件信息</translation>
</message>
<message>
<location line="+53"/>
<source>Qt Designer couldn't find any plugins</source>
<translation>Qt 设计师无法找到任何插件</translation>
</message>
<message>
<location line="+3"/>
<source>Qt Designer found the following plugins</source>
<translation>Qt 设计师已经找到如下插件</translation>
</message>
<message>
<source>TextLabel</source>
<translation type="obsolete">文本标签</translation>
</message>
<message>
<location line="-52"/>
<source>Refresh</source>
<translation>刷新</translation>
</message>
<message>
<location line="+1"/>
<source>Scan for newly installed custom widget plugins.</source>
<translation>扫描新安装的自定义窗口部件插件。</translation>
</message>
<message>
<location line="+106"/>
<source>New custom widget plugins have been found.</source>
<translation>新的自定义窗口部件插件已经被找到。</translation>
</message>
<message>
<source>1</source>
<translation type="obsolete">1</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PreviewActionGroup</name>
<message>
<location filename="../tools/designer/src/components/formeditor/previewactiongroup.cpp" line="+95"/>
<source>%1 Style</source>
<translation>%1 风格</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PreviewConfigurationWidget::PreviewConfigurationWidgetPrivate</name>
<message>
<location filename="../tools/designer/src/lib/shared/previewconfigurationwidget.cpp" line="+118"/>
<source>Load Custom Device Skin</source>
<translation>加载自定义设备皮肤</translation>
</message>
<message>
<location line="+2"/>
<source>All QVFB Skins (*.%1)</source>
<translation>所有 QVFB 皮肤 (*.%1)</translation>
</message>
<message>
<location line="+16"/>
<source>%1 - Duplicate Skin</source>
<translation>%1 - 重复的皮肤</translation>
</message>
<message>
<location line="+1"/>
<source>The skin '%1' already exists.</source>
<translation>皮肤“%1”已经存在。</translation>
</message>
<message>
<location line="+14"/>
<source>%1 - Error</source>
<translation>%1 - 错误</translation>
</message>
<message>
<location line="+1"/>
<source>%1 is not a valid skin directory:
%2</source>
<translation>%1 不是有效皮肤目录：
%2</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PreviewDeviceSkin</name>
<message>
<location filename="../tools/designer/src/lib/shared/previewmanager.cpp" line="+218"/>
<source>&Close</source>
<translation>关闭(&C)</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PreviewManager</name>
<message>
<location line="+345"/>
<source>%1 - [Preview]</source>
<translation>%1 - [预览]</translation>
</message>
<message>
<source>%1 Style</source>
<translation type="obsolete">%1 风格</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PreviewWidget</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/previewwidget.ui"/>
<source>Preview Window</source>
<translation>预览窗口</translation>
</message>
<message>
<location/>
<source>LineEdit</source>
<translation>LineEdit</translation>
</message>
<message>
<location/>
<source>ComboBox</source>
<translation>Combobox</translation>
</message>
<message>
<location/>
<source>PushButton</source>
<translation>PushButton</translation>
</message>
<message>
<location/>
<source>ButtonGroup2</source>
<translation>ButtonGroup2</translation>
</message>
<message>
<location/>
<source>CheckBox1</source>
<translation>Checkbox1</translation>
</message>
<message>
<location/>
<source>CheckBox2</source>
<translation>CheckBox2</translation>
</message>
<message>
<location/>
<source>ButtonGroup</source>
<translation>ButtonGroup</translation>
</message>
<message>
<location/>
<source>RadioButton1</source>
<translation>RadioButton1</translation>
</message>
<message>
<location/>
<source>RadioButton2</source>
<translation>RadioButton2</translation>
</message>
<message>
<location/>
<source>RadioButton3</source>
<translation>RadioBUtton3</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PromotionModel</name>
<message>
<location filename="../tools/designer/src/lib/shared/promotionmodel.cpp" line="+17"/>
<source>Name</source>
<translation>名称</translation>
</message>
<message>
<location line="+1"/>
<source>Header file</source>
<translation>头文件</translation>
</message>
<message>
<location line="+1"/>
<source>Global include</source>
<translation>全局包含</translation>
</message>
<message>
<location line="+1"/>
<source>Usage</source>
<translation>用法</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PromotionTaskMenu</name>
<message>
<location filename="../tools/designer/src/lib/shared/promotiontaskmenu.cpp" line="+85"/>
<source>Promoted widgets...</source>
<translation>提升的窗口部件...</translation>
</message>
<message>
<location line="+1"/>
<source>Promote to ...</source>
<translation>提升为...</translation>
</message>
<message>
<location line="+2"/>
<source>Promote to</source>
<translation>提升为</translation>
</message>
<message>
<location line="+1"/>
<source>Demote to %1</source>
<translation>取消 %1 的提升</translation>
</message>
<message>
<location line="-2"/>
<source>Change signals/slots...</source>
<translation>改变信号/槽...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PropertyEditor</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/propertyeditor.cpp" line="+188"/>
<source>Add Dynamic Property...</source>
<translation>添加动态属性 ...</translation>
</message>
<message>
<location line="+1"/>
<source>Remove Dynamic Property</source>
<translation>移除动态属性</translation>
</message>
<message>
<location line="+1"/>
<source>Sorting</source>
<translation>排序中</translation>
</message>
<message>
<location line="+1"/>
<source>Color Groups</source>
<translation>颜色组</translation>
</message>
<message>
<location line="+1"/>
<source>Tree View</source>
<translation>树视图</translation>
</message>
<message>
<location line="+1"/>
<source>Drop Down Button View</source>
<translation>下拉按钮视图</translation>
</message>
<message>
<location line="+49"/>
<source>String...</source>
<translation>字符串...</translation>
</message>
<message>
<location line="+3"/>
<source>Bool...</source>
<translation>布尔...</translation>
</message>
<message>
<location line="+4"/>
<source>Other...</source>
<translation>其它...</translation>
</message>
<message>
<location line="+7"/>
<source>Configure Property Editor</source>
<translation>配置属性编辑器</translation>
</message>
<message>
<source>%1
%2</source>
<translation type="obsolete">%1
%2</translation>
</message>
<message>
<location line="+533"/>
<source>Object: %1
Class: %2</source>
<translation>对象：%1
类：%2</translation>
</message>
</context>
<context>
<name>qdesigner_internal::PropertyLineEdit</name>
<message>
<location filename="../tools/designer/src/lib/shared/propertylineedit.cpp" line="+88"/>
<source>Insert line break</source>
<translation>插入换行符</translation>
</message>
</context>
<context>
<name>qdesigner_internal::QDesignerPromotionDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_promotiondialog.cpp" line="+85"/>
<source>Promoted Widgets</source>
<translation>提升的窗口部件</translation>
</message>
<message>
<location line="+7"/>
<source>Promoted Classes</source>
<translation>提升的类</translation>
</message>
<message>
<location line="+60"/>
<source>Promote</source>
<translation>提升</translation>
</message>
<message>
<location line="+169"/>
<source>%1 - Error</source>
<translation>%1 - 错误</translation>
</message>
<message>
<location line="-17"/>
<source>Change signals/slots...</source>
<translation>改变信号/槽...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::QDesignerResource</name>
<message>
<location filename="../tools/designer/src/components/formeditor/qdesigner_resource.cpp" line="+277"/>
<source>Loading qrc file</source>
<translation>正在载入 qrc 文件</translation>
</message>
<message>
<location line="+1"/>
<source>The specified qrc file <p><b>%1</b></p><p>could not be found. Do you want to update the file location?</p></source>
<translation>指定的 qrc 文件<p><b>%1</b></p><p>无法找到。您想更新这个文件的位置么？</p></translation>
</message>
<message>
<location line="+6"/>
<source>New location for %1</source>
<translation>%1 的新位置</translation>
</message>
<message>
<location line="+1"/>
<source>Resource files (*.qrc)</source>
<translation>资源文件 (*.qrc)</translation>
</message>
</context>
<context>
<name>qdesigner_internal::QDesignerTaskMenu</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_taskmenu.cpp" line="+68"/>
<source>Change objectName...</source>
<translation>改变对象名称...</translation>
</message>
<message>
<location line="+1"/>
<source>Change toolTip...</source>
<translation>改变工具提示...</translation>
</message>
<message>
<location line="+1"/>
<source>Change whatsThis...</source>
<translation>改变“这是什么”...</translation>
</message>
<message>
<location line="+4"/>
<source>Create Menu Bar</source>
<translation>创建菜单栏</translation>
</message>
<message>
<location line="+1"/>
<source>Add Tool Bar</source>
<translation>添加工具栏</translation>
</message>
<message>
<location line="+1"/>
<source>Create Status Bar</source>
<translation>创建状态栏</translation>
</message>
<message>
<location line="-5"/>
<source>Change styleSheet...</source>
<translation>改变样式表...</translation>
</message>
<message>
<location line="+6"/>
<source>Remove Status Bar</source>
<translation>移除状态栏</translation>
</message>
<message>
<location line="+1"/>
<source>Change script...</source>
<translation>改变脚本...</translation>
</message>
<message>
<location line="+1"/>
<source>Change signals/slots...</source>
<translation>改变信号/槽...</translation>
</message>
<message>
<location line="+1"/>
<source>Go to slot...</source>
<translation>转到槽...</translation>
</message>
<message>
<location line="+3"/>
<source>Size Constraints</source>
<translation>大小限定</translation>
</message>
<message>
<location line="+4"/>
<source>Set Minimum Width</source>
<translation>设置最小宽度</translation>
</message>
<message>
<location line="+4"/>
<source>Set Minimum Height</source>
<translation>设置最小高度</translation>
</message>
<message>
<location line="+4"/>
<source>Set Minimum Size</source>
<translation>设置最小大小</translation>
</message>
<message>
<location line="+6"/>
<source>Set Maximum Width</source>
<translation>设置最大宽度</translation>
</message>
<message>
<location line="+4"/>
<source>Set Maximum Height</source>
<translation>设置最大高度</translation>
</message>
<message>
<location line="+4"/>
<source>Set Maximum Size</source>
<translation>设置最大大小</translation>
</message>
<message>
<location line="+235"/>
<source>Edit ToolTip</source>
<translation>编辑工具提示</translation>
</message>
<message>
<location line="+5"/>
<source>Edit WhatsThis</source>
<translation>编辑这是什么</translation>
</message>
<message>
<location line="+144"/>
<source>no signals available</source>
<translation type="unfinished"></translation>
</message>
<message numerus="yes">
<location line="+67"/>
<source>Set size constraint on %n widget(s)</source>
<translation>
<numerusform>为 %n 个窗口部件设置大小限定</numerusform>
</translation>
</message>
</context>
<context>
<name>qdesigner_internal::QDesignerWidgetBox</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_widgetbox.cpp" line="+127"/>
<location line="+13"/>
<source>Unexpected element <%1></source>
<translation>未预期的元素<%1></translation>
</message>
<message>
<location line="+7"/>
<source>A parse error occurred at line %1, column %2 of the XML code specified for the widget %3: %4
%5</source>
<translation>在解析由规定窗口部件 %3 的 XML 代码的 %1 行、%2列时发生一个解析错误：%4
%5</translation>
</message>
<message>
<location line="+9"/>
<source>The XML code specified for the widget %1 does not contain any widget elements.
%2</source>
<translation>规定窗口部件 %1 的 XML 代码不包含任何窗口部件元素。
%2</translation>
</message>
</context>
<context>
<name>qdesigner_internal::QtGradientEditor</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradienteditor.cpp" line="+289"/>
<source>Linear</source>
<translation>线性</translation>
</message>
<message>
<location line="+1"/>
<source>Radial</source>
<translation>放射状</translation>
</message>
<message>
<location line="+1"/>
<source>Conical</source>
<translation>圆锥状</translation>
</message>
<message>
<location line="+20"/>
<source>Pad</source>
<translation>衬垫</translation>
</message>
<message>
<location line="+1"/>
<source>Repeat</source>
<translation>重复</translation>
</message>
<message>
<location line="+1"/>
<source>Reflect</source>
<translation>反射</translation>
</message>
</context>
<context>
<name>qdesigner_internal::QtGradientStopsController</name>
<message>
<location filename="../tools/shared/qtgradienteditor/qtgradientstopscontroller.cpp" line="+177"/>
<source>H</source>
<translation>H</translation>
</message>
<message>
<location line="+1"/>
<source>S</source>
<translation>S</translation>
</message>
<message>
<location line="+1"/>
<source>V</source>
<translation>V</translation>
</message>
<message>
<location line="+6"/>
<location line="+4"/>
<source>Hue</source>
<translation>色调</translation>
</message>
<message>
<location line="-3"/>
<source>Sat</source>
<translation>浓度</translation>
</message>
<message>
<location line="+1"/>
<source>Val</source>
<translation>值</translation>
</message>
<message>
<location line="+3"/>
<source>Saturation</source>
<translation>浓度</translation>
</message>
<message>
<location line="+1"/>
<source>Value</source>
<translation>值</translation>
</message>
<message>
<location line="+22"/>
<source>R</source>
<translation>R</translation>
</message>
<message>
<location line="+1"/>
<source>G</source>
<translation>G</translation>
</message>
<message>
<location line="+1"/>
<source>B</source>
<translation>B</translation>
</message>
<message>
<location line="+6"/>
<source>Red</source>
<translation>红色</translation>
</message>
<message>
<location line="+1"/>
<source>Green</source>
<translation>绿色</translation>
</message>
<message>
<location line="+1"/>
<source>Blue</source>
<translation>蓝色</translation>
</message>
</context>
<context>
<name>qdesigner_internal::RichTextEditorDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/richtexteditor.cpp" line="+436"/>
<source>Edit text</source>
<translation>编辑文本</translation>
</message>
<message>
<location line="+32"/>
<source>&Cancel</source>
<translation>取消(&C)</translation>
</message>
<message>
<location line="-2"/>
<source>&OK</source>
<translation>确定(&O)</translation>
</message>
<message>
<location line="-7"/>
<source>Rich Text</source>
<translation>多文本</translation>
</message>
<message>
<location line="+1"/>
<source>Source</source>
<translation>源</translation>
</message>
</context>
<context>
<name>qdesigner_internal::RichTextEditorToolBar</name>
<message>
<location line="-294"/>
<source>Bold</source>
<translation>粗体</translation>
</message>
<message>
<location line="+6"/>
<source>Italic</source>
<translation>斜体</translation>
</message>
<message>
<location line="+1"/>
<source>CTRL+I</source>
<translation>CTRL+I</translation>
</message>
<message>
<location line="+5"/>
<source>Underline</source>
<translation>下划线</translation>
</message>
<message>
<location line="+1"/>
<source>CTRL+U</source>
<translation>CTRL+U</translation>
</message>
<message>
<location line="-12"/>
<source>CTRL+B</source>
<translation>CTRL+B</translation>
</message>
<message>
<location line="+25"/>
<source>Left Align</source>
<translation>左对齐</translation>
</message>
<message>
<location line="+5"/>
<source>Center</source>
<translation>中央对齐</translation>
</message>
<message>
<location line="+5"/>
<source>Right Align</source>
<translation>右对齐</translation>
</message>
<message>
<location line="+5"/>
<source>Justify</source>
<translation>自动调整</translation>
</message>
<message>
<location line="+9"/>
<source>Superscript</source>
<translation>上标</translation>
</message>
<message>
<location line="+6"/>
<source>Subscript</source>
<translation>下标</translation>
</message>
<message>
<location line="+9"/>
<source>Insert &Link</source>
<translation>插入链接(&L)</translation>
</message>
<message>
<location line="+5"/>
<source>Insert &Image</source>
<translation>插入图像(&I)</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ScriptDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/scriptdialog.cpp" line="+68"/>
<source>Edit script</source>
<translation>编辑脚本</translation>
</message>
<message>
<location line="+55"/>
<source>Syntax error</source>
<translation>语法错误</translation>
</message>
<message>
<location line="-50"/>
<source><html>Enter a Qt Script snippet to be executed while loading the form.<br>The widget and its children are accessible via the variables <i>widget</i> and <i>childWidgets</i>, respectively.</source>
<translation><html>输入一段在加载这个窗体时会被运行的 Qt 脚本片段。<br>这个窗口部件和它的子窗口部件可以通过<i>widget</i>和<i>childWidgets</i>进行访问。</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ScriptErrorDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/scripterrordialog.cpp" line="+27"/>
<source>Script errors</source>
<translation>脚本错误</translation>
</message>
</context>
<context>
<name>qdesigner_internal::SignalSlotDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/signalslotdialog.cpp" line="+199"/>
<source>There is already a slot with the signature '%1'.</source>
<translation>这里已经有一个签名为“%1”的槽。</translation>
</message>
<message>
<location line="+5"/>
<source>There is already a signal with the signature '%1'.</source>
<translation>这里已经有一个签名为“%1”的信号。</translation>
</message>
<message>
<location line="+7"/>
<source>%1 - Duplicate Signature</source>
<translation>%1 - 重复的签名</translation>
</message>
<message>
<location line="+21"/>
<location line="+76"/>
<source>Signals/Slots of %1</source>
<translation>%1 的信号/槽</translation>
</message>
</context>
<context>
<name>qdesigner_internal::SignalSlotEditorPlugin</name>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/signalsloteditor_plugin.cpp" line="+76"/>
<source>Edit Signals/Slots</source>
<translation>编辑信号/槽</translation>
</message>
<message>
<location line="+2"/>
<source>F4</source>
<translation>F4</translation>
</message>
</context>
<context>
<name>qdesigner_internal::SignalSlotEditorTool</name>
<message>
<location filename="../tools/designer/src/components/signalsloteditor/signalsloteditor_tool.cpp" line="+62"/>
<source>Edit Signals/Slots</source>
<translation>编辑信号/槽</translation>
</message>
</context>
<context>
<name>qdesigner_internal::StatusBarTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/toolbar_taskmenu.cpp" line="+85"/>
<source>Remove</source>
<translation>移除</translation>
</message>
</context>
<context>
<name>qdesigner_internal::StringListEditorButton</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/stringlisteditorbutton.cpp" line="+60"/>
<source>Change String List</source>
<translation>改变字符串列表</translation>
</message>
</context>
<context>
<name>qdesigner_internal::StyleSheetEditorDialog</name>
<message>
<location filename="../tools/designer/src/lib/shared/stylesheeteditor.cpp" line="+101"/>
<source>Edit Style Sheet</source>
<translation>编辑样式表</translation>
</message>
<message>
<location line="-7"/>
<location line="+283"/>
<source>Valid Style Sheet</source>
<translation>有效样式表</translation>
</message>
<message>
<location line="+3"/>
<source>Invalid Style Sheet</source>
<translation>无效样式表</translation>
</message>
<message>
<location line="-284"/>
<source>Add Resource...</source>
<translation>添加资源...</translation>
</message>
<message>
<location line="+1"/>
<source>Add Gradient...</source>
<translation>添加渐变...</translation>
</message>
<message>
<location line="+1"/>
<source>Add Color...</source>
<translation>添加颜色...</translation>
</message>
<message>
<location line="+1"/>
<source>Add Font...</source>
<translation>添加字体...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TabOrderEditor</name>
<message>
<location filename="../tools/designer/src/components/tabordereditor/tabordereditor.cpp" line="+363"/>
<source>Start from Here</source>
<translation>从这里开始</translation>
</message>
<message>
<location line="+3"/>
<source>Restart</source>
<translation>重新开始</translation>
</message>
<message>
<location line="+2"/>
<source>Tab Order List...</source>
<translation>制表符顺序列表...</translation>
</message>
<message>
<location line="+44"/>
<source>Tab Order List</source>
<translation>制表符顺序列表</translation>
</message>
<message>
<location line="+1"/>
<source>Tab Order</source>
<translation>制表符顺序</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TabOrderEditorPlugin</name>
<message>
<location filename="../tools/designer/src/components/tabordereditor/tabordereditor_plugin.cpp" line="+77"/>
<source>Edit Tab Order</source>
<translation>编辑 Tab 顺序</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TabOrderEditorTool</name>
<message>
<location filename="../tools/designer/src/components/tabordereditor/tabordereditor_tool.cpp" line="+61"/>
<source>Edit Tab Order</source>
<translation>编辑 Tab 顺序</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TableWidgetEditor</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/tablewidgeteditor.ui"/>
<source>Edit Table Widget</source>
<translation>编辑表格窗口部件</translation>
</message>
<message>
<location/>
<source>&Items</source>
<translation>项目(&I)</translation>
</message>
<message>
<source>Rows</source>
<translation type="obsolete">行</translation>
</message>
<message>
<source>Move Row Down</source>
<translation type="obsolete">向下移动行</translation>
</message>
<message>
<source>D</source>
<translation type="obsolete">D</translation>
</message>
<message>
<source>Move Row Up</source>
<translation type="obsolete">向上移动行</translation>
</message>
<message>
<source>U</source>
<translation type="obsolete">U</translation>
</message>
<message>
<source>Table Rows</source>
<translation type="obsolete">表格行</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/tablewidgeteditor.cpp" line="+74"/>
<source>New Row</source>
<translation>新建行</translation>
</message>
<message>
<location line="+8"/>
<source>&Columns</source>
<translation>列(&C)</translation>
</message>
<message>
<location line="+1"/>
<source>&Rows</source>
<translation>行(&R)</translation>
</message>
<message>
<location line="+137"/>
<source>Properties &<<</source>
<translation>属性&<<</translation>
</message>
<message>
<location line="+2"/>
<location filename="../tools/designer/src/components/taskmenu/tablewidgeteditor.ui"/>
<source>Properties &>></source>
<translation>属性&>></translation>
</message>
<message>
<source>New</source>
<translation type="obsolete">新建</translation>
</message>
<message>
<source>Delete Row</source>
<translation type="obsolete">删除行</translation>
</message>
<message>
<source>Delete</source>
<translation type="obsolete">删除</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/tablewidgeteditor.ui"/>
<source>Table Items</source>
<translation>表格项目</translation>
</message>
<message>
<source>Columns</source>
<translation type="obsolete">列</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/tablewidgeteditor.cpp" line="-151"/>
<source>New Column</source>
<translation>新建列</translation>
</message>
<message>
<source>Delete Column</source>
<translation type="obsolete">删除列</translation>
</message>
<message>
<source>Move Column Up</source>
<translation type="obsolete">向前移动列</translation>
</message>
<message>
<source>Move Column Down</source>
<translation type="obsolete">向后移动列</translation>
</message>
<message>
<source>Table Columns</source>
<translation type="obsolete">表格列</translation>
</message>
<message>
<source>Icon</source>
<translation type="obsolete">图标</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TableWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/tablewidget_taskmenu.cpp" line="+68"/>
<source>Edit Items...</source>
<translation>编辑项目...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TemplateOptionsWidget</name>
<message>
<location filename="../tools/designer/src/components/formeditor/templateoptionspage.cpp" line="-18"/>
<source>Pick a directory to save templates in</source>
<translation>选择一个用于保存模板的目录</translation>
</message>
<message>
<location filename="../tools/designer/src/components/formeditor/templateoptionspage.ui"/>
<source>Form</source>
<translation>窗体</translation>
</message>
<message>
<location/>
<source>Additional Template Paths</source>
<translation>添加模板路径</translation>
</message>
<message>
<location/>
<source>...</source>
<translation>...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TextEditTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/textedit_taskmenu.cpp" line="+63"/>
<source>Change HTML...</source>
<translation>改变HTML...</translation>
</message>
<message>
<location line="-1"/>
<source>Edit HTML</source>
<translation>编辑 HTML</translation>
</message>
<message>
<location line="+10"/>
<source>Edit Text</source>
<translation>编辑文本</translation>
</message>
<message>
<location line="+1"/>
<source>Change Plain Text...</source>
<translation>改变普通文本...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TextEditor</name>
<message>
<location filename="../tools/designer/src/components/propertyeditor/designerpropertymanager.cpp" line="-201"/>
<source>Choose Resource...</source>
<translation>选择资源...</translation>
</message>
<message>
<location line="+1"/>
<source>Choose File...</source>
<translation>选择文件...</translation>
</message>
<message>
<location line="+120"/>
<source>Choose a File</source>
<translation>选择一个文件</translation>
</message>
<message>
<location line="-115"/>
<source>...</source>
<translation>...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ToolBarEventFilter</name>
<message>
<location filename="../tools/designer/src/lib/shared/qdesigner_toolbar.cpp" line="+239"/>
<source>Insert Separator</source>
<translation>插入分隔符</translation>
</message>
<message>
<location line="-65"/>
<source>Remove action '%1'</source>
<translation>移除动作“%1”</translation>
</message>
<message>
<location line="+7"/>
<source>Remove Toolbar '%1'</source>
<translation>移除工具栏“%1”</translation>
</message>
<message>
<location line="-28"/>
<source>Insert Separator before '%1'</source>
<translation>在“%1”之前插入分隔符</translation>
</message>
<message>
<location line="+9"/>
<source>Append Separator</source>
<translation>添加分隔符</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ToolBarTaskMenu</name>
<message>
<source>Customize...</source>
<translation type="obsolete">自定义...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TreeWidgetEditor</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.ui"/>
<source>Edit Tree Widget</source>
<translation>编辑树窗口部件</translation>
</message>
<message>
<location/>
<source>&Items</source>
<translation>项目(&I)</translation>
</message>
<message>
<location/>
<source>Tree Items</source>
<translation>树项目</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.cpp" line="+80"/>
<source>&Columns</source>
<translation>列(&C)</translation>
</message>
<message>
<location line="+69"/>
<source>Per column properties</source>
<translation>每列属性</translation>
</message>
<message>
<location line="+1"/>
<source>Common properties</source>
<translation>共同属性</translation>
</message>
<message>
<location line="+53"/>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.ui"/>
<source>New Item</source>
<translation>新建项目</translation>
</message>
<message>
<location line="+19"/>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.ui"/>
<source>New Subitem</source>
<translation>新建子项目</translation>
</message>
<message>
<location line="+175"/>
<source>Properties &<<</source>
<translation>属性&<<</translation>
</message>
<message>
<location line="+2"/>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.ui"/>
<source>Properties &>></source>
<translation>属性&>></translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.ui"/>
<source>New &Subitem</source>
<translation>新建子项目(&S)</translation>
</message>
<message>
<location/>
<source>Delete Item</source>
<translation>删除项目</translation>
</message>
<message>
<location/>
<source>Move Item Left (before Parent Item)</source>
<translation>向左移动项目(移动到父项目之前)</translation>
</message>
<message>
<location/>
<source>L</source>
<translation>L</translation>
</message>
<message>
<location/>
<source>Move Item Right (as a First Subitem of the Next Sibling Item)</source>
<translation>向右移动项目(作为下一个同级项目的第一个子项目)</translation>
</message>
<message>
<location/>
<source>R</source>
<translation>R</translation>
</message>
<message>
<location/>
<source>Move Item Up</source>
<translation>向上移动项目</translation>
</message>
<message>
<location/>
<source>U</source>
<translation>U</translation>
</message>
<message>
<location/>
<source>Move Item Down</source>
<translation>向下移动项目</translation>
</message>
<message>
<location/>
<source>D</source>
<translation>D</translation>
</message>
<message>
<source>Columns</source>
<translation type="obsolete">列</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.cpp" line="-327"/>
<source>New Column</source>
<translation>新建列</translation>
</message>
<message>
<source>New</source>
<translation type="obsolete">新建</translation>
</message>
<message>
<source>Delete Column</source>
<translation type="obsolete">删除列</translation>
</message>
<message>
<source>Delete</source>
<translation type="obsolete">删除</translation>
</message>
<message>
<source>Move Column Up</source>
<translation type="obsolete">向前移动列</translation>
</message>
<message>
<source>Move Column Down</source>
<translation type="obsolete">向后移动列</translation>
</message>
<message>
<source>Tree Columns</source>
<translation type="obsolete">树列</translation>
</message>
<message>
<source>New Sub Item</source>
<translation type="obsolete">新建子项目</translation>
</message>
<message>
<location filename="../tools/designer/src/components/taskmenu/treewidgeteditor.ui"/>
<source>1</source>
<translation>1</translation>
</message>
<message>
<location/>
<source>&New</source>
<translation>新建(&N)</translation>
</message>
<message>
<location/>
<source>&Delete</source>
<translation>删除(&D)</translation>
</message>
<message>
<source>Icon</source>
<translation type="obsolete">图标</translation>
</message>
</context>
<context>
<name>qdesigner_internal::TreeWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/treewidget_taskmenu.cpp" line="+67"/>
<source>Edit Items...</source>
<translation>编辑项目...</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WidgetBox</name>
<message>
<location filename="../tools/designer/src/components/widgetbox/widgetbox_dnditem.cpp" line="+113"/>
<source>Warning: Widget creation failed in the widget box. This could be caused by invalid custom widget XML.</source>
<translation>警告：部件框中的部件创建失败。可能是由于无效的自定义部件XML引起的。</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WidgetBoxTreeView</name>
<message>
<source>Scratchpad</source>
<translation type="obsolete">便条</translation>
</message>
<message>
<source>Custom Widgets</source>
<translation type="obsolete">自定义窗口部件</translation>
</message>
<message>
<source>Remove</source>
<translation type="obsolete">移除</translation>
</message>
<message>
<source>Edit name</source>
<translation type="obsolete">编辑名称</translation>
</message>
<message>
<source>Expand all</source>
<translation type="obsolete">全部展开</translation>
</message>
<message>
<source>Collapse all</source>
<translation type="obsolete">全部折叠</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WidgetBoxTreeWidget</name>
<message>
<location filename="../tools/designer/src/components/widgetbox/widgetboxtreewidget.cpp" line="-268"/>
<source>Scratchpad</source>
<translation>便条</translation>
</message>
<message>
<location line="+370"/>
<source>Custom Widgets</source>
<translation>自定义窗口部件</translation>
</message>
<message>
<location line="+260"/>
<source>Expand all</source>
<translation>全部展开</translation>
</message>
<message>
<location line="+1"/>
<source>Collapse all</source>
<translation>全部折叠</translation>
</message>
<message>
<location line="+3"/>
<source>List View</source>
<translation>列表视图</translation>
</message>
<message>
<location line="+1"/>
<source>Icon View</source>
<translation>图标视图</translation>
</message>
<message>
<location line="+15"/>
<source>Remove</source>
<translation>移除</translation>
</message>
<message>
<location line="+2"/>
<source>Edit name</source>
<translation>编辑名称</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WidgetDataBase</name>
<message>
<location filename="../tools/designer/src/lib/shared/widgetdatabase.cpp" line="-411"/>
<source>A custom widget plugin whose class name (%1) matches that of an existing class has been found.</source>
<translation>类名称为 %1 的自定义窗口部件插件和一个已经存在的类一样。</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WidgetEditorTool</name>
<message>
<location filename="../tools/designer/src/components/formeditor/tool_widgeteditor.cpp" line="+71"/>
<source>Edit Widgets</source>
<translation>编辑窗口部件</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WidgetFactory</name>
<message>
<location filename="../tools/designer/src/lib/shared/widgetfactory.cpp" line="+267"/>
<source>The custom widget factory registered for widgets of class %1 returned 0.</source>
<translation>为类 %1 的窗口部件注册的自定义窗口部件工厂返回 0。</translation>
</message>
<message>
<location line="+44"/>
<source>A class name mismatch occurred when creating a widget using the custom widget factory registered for widgets of class %1. It returned a widget of class %2.</source>
<translation>在使用为类 %1 的窗口部件注册的自定义窗口部件工厂创建一个窗口部件时，发生了类名称不匹配。它返回了一个类 %2 的窗口部件。</translation>
</message>
<message>
<location line="+99"/>
<source>%1 Widget</source>
<translation>%1 窗口部件</translation>
</message>
<message>
<location line="+90"/>
<source>The current page of the container '%1' (%2) could not be determined while creating a layout.This indicates an inconsistency in the ui-file, probably a layout being constructed on a container widget.</source>
<translation>在创建一个布局的时候，不能决定这个容器“%1”（%2）的当前页。这表明在 UI 文件中有一个矛盾，也许在一个容器窗口部件中已经构造了一个布局。</translation>
</message>
<message>
<location line="+53"/>
<source>Attempt to add a layout to a widget '%1' (%2) which already has an unmanaged layout of type %3.
This indicates an inconsistency in the ui-file.</source>
<translation>试图向一个已经包含了类型为 %3 的非托管布局的窗口部件 “%1”（%2）添加布局。
这表明这个ui文件中有矛盾。</translation>
</message>
<message>
<location line="+211"/>
<source>Cannot create style '%1'.</source>
<translation>无法创建样式“%1”。</translation>
</message>
</context>
<context>
<name>qdesigner_internal::WizardContainerWidgetTaskMenu</name>
<message>
<location filename="../tools/designer/src/components/taskmenu/containerwidget_taskmenu.cpp" line="-49"/>
<source>Next</source>
<translation>下一个</translation>
</message>
<message>
<location line="+1"/>
<source>Back</source>
<translation>返回</translation>
</message>
</context>
<context>
<name>qdesigner_internal::ZoomMenu</name>
<message>
<location filename="../tools/designer/src/lib/shared/zoomwidget.cpp" line="+84"/>
<source>%1 %</source>
<extracomment>Zoom factor</extracomment>
<translation>%1 %</translation>
</message>
</context>
</TS>