diff -r 000000000000 -r cfcbf08528c4 qtmobility/src/bearer/qnetworksession.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/qtmobility/src/bearer/qnetworksession.cpp Thu Apr 01 08:30:34 2010 +0300 @@ -0,0 +1,711 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the Qt Mobility Components. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** If you have questions regarding the use of this file, please contact +** Nokia at qt-info@nokia.com. +** +** +** +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include +#include + +#include "qnetworksession.h" + +#ifdef Q_OS_SYMBIAN +#include "qnetworksession_s60_p.h" +#elif Q_WS_MAEMO_6 +#include "qnetworksession_maemo_p.h" +#else +#include "qnetworksession_p.h" +#endif + +QTM_BEGIN_NAMESPACE + +/*! + \class QNetworkSession + + \brief The QNetworkSession class provides control over the system's access points + and enables session management for cases when multiple clients access the same access point. + + \inmodule QtNetwork + \ingroup bearer + + A QNetworkSession enables control over the system's network interfaces. The session's configuration + parameter are determined via the QNetworkConfiguration object to which it is bound. Depending on the + type of the session (single access point or service network) a session may be linked to one or more + network interfaces. By means of \l{open()}{opening} and \l{close()}{closing} of network sessions + a developer can start and stop the systems network interfaces. If the configuration represents + multiple access points (see \l QNetworkConfiguration::ServiceNetwork) more advanced features such as roaming may be supported. + + QNetworkSession supports session management within the same process and depending on the platform's + capabilities may support out-of-process sessions. If the same + network configuration is used by multiple open sessions the underlying network interface is only terminated once + the last session has been closed. + + \section1 Roaming + + Applications may connect to the preferredConfigurationChanged() signal in order to + receive notifications when a more suitable access point becomes available. + In response to this signal the application must either initiate the roaming via migrate() + or ignore() the new access point. Once the session has roamed the + newConfigurationActivated() signal is emitted. The application may now test the + carrier and must either accept() or reject() it. The session will return to the previous + access point if the roaming was rejected. The subsequent state diagram depicts the required + state transitions. + + \image roaming-states.png + + Some platforms may distinguish forced roaming and application level roaming (ALR). + ALR implies that the application controls (via migrate(), ignore(), accept() and reject()) + whether a network session can roam from one access point to the next. Such control is useful + if the application maintains stateful socket connections and wants to control the transition from + one interface to the next. Forced roaming implies that the system automatically roams to the next network without + consulting the application. This has the advantage that the application can make use of roaming features + without actually being aware of it. It is expected that the application detects that the underlying + socket is broken and automatically reconnects via the new network link. + + If the platform supports both modes of roaming, an application indicates its preference + by connecting to the preferredConfigurationChanged() signal. Connecting to this signal means that + the application wants to take control over the roaming behavior and therefore implies application + level roaming. If the client does not connect to the preferredConfigurationChanged(), forced roaming + is used. If forced roaming is not supported the network session will not roam by default. + + Some applications may want to suppress any form of roaming altogether. Possible use cases may be + high priority downloads or remote services which cannot handle a roaming enabled client. Clients + can suppress roaming by connecting to the preferredConfigurationChanged() signal and answer each + signal emission with ignore(). + + \sa QNetworkConfiguration, QNetworkConfigurationManager +*/ + +/*! + \enum QNetworkSession::State + + This enum describes the connectivity state of the session. If the session is based on a + single access point configuration the state of the session is the same as the state of the + associated network interface. + + \value Invalid The session is invalid due to an invalid configuration. This may + happen due to a removed access point or a configuration that was + invalid to begin with. + \value NotAvailable The session is based on a defined but not yet discovered QNetworkConfiguration + (see \l QNetworkConfiguration::StateFlag). + \value Connecting The network session is being established. + \value Connected The network session is connected. If the current process wishes to use this session + it has to register its interest by calling open(). A network session + is considered to be ready for socket operations if it isOpen() and connected. + \value Closing The network session is in the process of being shut down. + \value Disconnected The network session is not connected. The associated QNetworkConfiguration + has the state QNetworkConfiguration::Discovered. + \value Roaming The network session is roaming from one access point to another + access point. +*/ + +/*! + \enum QNetworkSession::SessionError + + This enum describes the session errors that can occur. + + \value UnknownSessionError An unidentified error occurred. + \value SessionAbortedError The session was aborted by the user or system. + \value RoamingError The session cannot roam to a new configuration. + \value OperationNotSupportedError The operation is not supported for current configuration. + \value InvalidConfigurationError The operation cannot currently be performed for the + current configuration. +*/ + +/*! + \fn void QNetworkSession::stateChanged(QNetworkSession::State state) + + This signal is emitted whenever the state of the network session changes. + The \a state parameter is the new state. + + \sa state() +*/ + +/*! + \fn void QNetworkSession::error(QNetworkSession::SessionError error) + + This signal is emitted after an error occurred. The \a error parameter + describes the error that occurred. + + \sa error(), errorString() +*/ + +/*! + \fn void QNetworkSession::preferredConfigurationChanged(const QNetworkConfiguration& config, bool isSeamless) + + This signal is emitted when the preferred configuration/access point for the + session changes. Only sessions which are based on service network configurations + may emit this signal. \a config can be used to determine access point specific + details such as proxy settings and \a isSeamless indicates whether roaming will + break the sessions IP address. + + As a consequence to this signal the application must either start the roaming process + by calling migrate() or choose to ignore() the new access point. + + If the roaming process is non-seamless the IP address will change which means that + a socket becomes invalid. However seamless mobility can ensure that the local IP address + does not change. This is achieved by using a virtual IP address which is bound to the actual + link address. During the roaming process the virtual address is attached to the new link + address. + + Some platforms may support the concept of Forced Roaming and Application Level Roaming (ALR). + Forced roaming implies that the platform may simply roam to a new configuration without + consulting applications. It is up to the application to detect the link layer loss and reestablish + its sockets. In contrast ALR provides the opportunity to prevent the system from roaming. + If this session is based on a configuration that supports roaming the application can choose + whether it wants to be consulted (ALR use case) by connecting to this signal. For as long as this signal + connection remains the session remains registered as a roaming stakeholder; otherwise roaming will + be enforced by the platform. + + \sa migrate(), ignore(), QNetworkConfiguration::isRoamingAvailable() +*/ + +/*! + \fn void QNetworkSession::newConfigurationActivated() + + This signal is emitted once the session has roamed to the new access point. + The application may reopen its socket and test the suitability of the new network link. + Subsequently it must either accept() or reject() the new access point. + + \sa accept(), reject() +*/ + +/*! + \fn void QNetworkSession::opened() + + This signal is emitted when the network session has been opened. + + The underlying network interface will not be shut down as long as the session remains open. + Note that this feature is dependent on \l{QNetworkConfigurationManager::SystemSessionSupport}{system wide session support}. +*/ + +/*! + \fn void QNetworkSession::closed() + + This signal is emitted when the network session has been closed. +*/ + +/*! + Constructs a session based on \a connectionConfig with the given \a parent. + + \sa QNetworkConfiguration +*/ +QNetworkSession::QNetworkSession(const QNetworkConfiguration& connectionConfig, QObject* parent) + : QObject(parent) +{ + d = new QNetworkSessionPrivate; + d->q = this; + d->publicConfig = connectionConfig; + d->syncStateWithInterface(); + QObject::connect(d, SIGNAL(quitPendingWaitsForOpened()), + this, SIGNAL(opened())); +} + +/*! + Frees the resources associated with the QNetworkSession object. +*/ +QNetworkSession::~QNetworkSession() +{ + delete d; +} + +/*! + Creates an open session which increases the session counter on the underlying network interface. + The system will not terminate a network interface until the session reference counter reaches zero. + Therefore an open session allows an application to register its use of the interface. + + As a result of calling open() the interface will be started if it is not connected/up yet. + Some platforms may not provide support for out-of-process sessions. On such platforms the session + counter ignores any sessions held by another process. The platform capabilities can be + detected via QNetworkConfigurationManager::capabilities(). + + Note that this call is asynchronous. Depending on the outcome of this call the results can be enquired + by connecting to the stateChanged(), opened() or error() signals. + + It is not a requirement to open a session in order to monitor the underlying network interface. + + \sa close(), stop(), isOpen() +*/ +void QNetworkSession::open() +{ + d->open(); +} + +/*! + Waits until the session has been opened, up to \a msecs milliseconds. If the session has been opened, this + function returns true; otherwise it returns false. In the case where it returns false, you can call error() + to determine the cause of the error. + + The following example waits up to one second for the session to be opened: + + \code + session->open(); + if (session->waitForOpened(1000)) + qDebug("Open!"); + \endcode + + If \a msecs is -1, this function will not time out. + + \sa open(), error() +*/ +bool QNetworkSession::waitForOpened(int msecs) +{ + if (d->isOpen) + return true; + + if (d->state != Connecting) + return false; + + QEventLoop* loop = new QEventLoop(this); + QObject::connect(d, SIGNAL(quitPendingWaitsForOpened()), + loop, SLOT(quit())); + QObject::connect(this, SIGNAL(error(QNetworkSession::SessionError)), + loop, SLOT(quit())); + + //final call + if (msecs>=0) + QTimer::singleShot(msecs, loop, SLOT(quit())); + + loop->exec(); + loop->disconnect(); + loop->deleteLater(); + + return d->isOpen; +} + +/*! + Decreases the session counter on the associated network configuration. If the session counter reaches zero + the active network interface is shut down. This also means that state() will only change from \l Connected to + \l Disconnected if the current session was the last open session. + + If the platform does not support out-of-process sessions calling this function does not stop the + interface. In this case \l{stop()} has to be used to force a shut down. + The platform capabilities can be detected via QNetworkConfigurationManager::capabilities(). + + Note that this call is asynchronous. Depending on the outcome of this call the results can be enquired + by connecting to the stateChanged(), opened() or error() signals. + + \sa open(), stop(), isOpen() +*/ +void QNetworkSession::close() +{ + d->close(); +} + +/*! + Invalidates all open sessions against the network interface and therefore stops the + underlying network interface. This function always changes the session's state() flag to + \l Disconnected. + + On Symbian platform, a 'NetworkControl' capability is required for + full interface-level stop (without the capability, only the current session is stopped). + + \sa open(), close() +*/ +void QNetworkSession::stop() +{ + d->stop(); +} + +/*! + Returns the QNetworkConfiguration that this network session object is based on. + + \sa QNetworkConfiguration +*/ +QNetworkConfiguration QNetworkSession::configuration() const +{ + return d->publicConfig; +} + +/* + Returns the type of bearer currently used by this session. The string is not translated and + therefore can not be shown to the user. The subsequent table presents the currently known + bearer types: + + \table + \header + \o Value + \o Description + \row + \o Unknown + \o The session is based on an unknown or unspecified bearer type. + \row + \o Ethernet + \o The session is based on Ethernet. + \row + \o WLAN + \o The session is based on Wireless LAN. + \row + \o 2G + \o The session uses CSD, GPRS, HSCSD, EDGE or cdmaOne. + \row + \o CDMA2000 + \o The session uses CDMA. + \row + \o WCDMA + \o The session uses W-CDMA/UMTS. + \row + \o HSPA + \o The session uses High Speed Packet Access. + \row + \o Bluetooth + \o The session uses Bluetooth. + \row + \o WiMAX + \o The session uses WiMAX. + \endtable + + If the session is based on a network configuration of type + \l QNetworkConfiguration::ServiceNetwork the type of the preferred or currently + active configuration is returned. Therefore the bearer type may change + over time. + + This function returns an empty string if this session is based on an invalid configuration, or + a network configuration of type \l QNetworkConfiguration::ServiceNetwork with no + \l {QNetworkConfiguration::children()}{children}. +*/ +/*QString QNetworkSession::bearerName() const +{ + return d->bearerName(); +}*/ + +/*! + Returns the network interface that is used by this session. + + This function only returns a valid QNetworkInterface when this session is \l Connected. + + The returned interface may change as a result of a roaming process. + + Note: this function does not work in Symbian emulator due to the way the + connectivity is emulated on Windows. + + \sa state() +*/ +QNetworkInterface QNetworkSession::interface() const +{ + return d->currentInterface(); +} + +/*! + Returns true if this session is open. If the number of all open sessions is greater than + zero the underlying network interface will remain connected/up. + + The session can be controlled via open() and close(). +*/ +bool QNetworkSession::isOpen() const +{ + return d->isOpen; +} + +/*! + Returns the state of the session. + + If the session is based on a single access point configuration the state of the + session is the same as the state of the associated network interface. Therefore + a network session object can be used to monitor network interfaces. + + A \l QNetworkConfiguration::ServiceNetwork based session summarizes the state of all its children + and therefore returns the \l Connected state if at least one of the service network's + \l {QNetworkConfiguration::children()}{children()} configurations is active. + + Note that it is not required to hold an open session in order to obtain the network interface state. + A connected but closed session may be used to monitor network interfaces whereas an open and connected + session object may prevent the network interface from being shut down. + + \sa error(), stateChanged() +*/ +QNetworkSession::State QNetworkSession::state() const +{ + return d->state; +} + +/*! + Returns the type of error that last occurred. + + \sa state(), errorString() +*/ +QNetworkSession::SessionError QNetworkSession::error() const +{ + return d->error(); +} + +/*! + Returns a human-readable description of the last device error that + occurred. + + \sa error() +*/ +QString QNetworkSession::errorString() const +{ + return d->errorString(); +} + +/*! + Returns the value for property \a key. + + A network session can have properties attached which may describe the session in more details. + This function can be used to gain access to those properties. + + The following property keys are guaranteed to be specified on all platforms: + + \table + \header + \o Key \o Description + \row + \o ActiveConfiguration + \o If the session \l isOpen() this property returns the identifier of the + QNetworkConfiguration that is used by this session; otherwise an empty string. + + The main purpose of this key is to determine which Internet access point is used + if the session is based on a \l{QNetworkConfiguration::ServiceNetwork}{ServiceNetwork}. + The following code snippet highlights the difference: + \code + QNetworkConfigurationManager mgr; + QNetworkConfiguration ap = mgr.defaultConfiguration(); + QNetworkSession* session = new QNetworkSession(ap); + ... //code activates session + + QString ident = session->sessionProperty("ActiveConfiguration").toString(); + if ( ap.type() == QNetworkConfiguration::ServiceNetwork ) { + Q_ASSERT( ap.identifier() != ident ); + Q_ASSERT( ap.children().contains( mgr.configurationFromIdentifier(ident) ) ); + } else if ( ap.type() == QNetworkConfiguration::InternetAccessPoint ) { + Q_ASSERT( ap.identifier() == ident ); + } + \endcode + \row + \o UserChoiceConfiguration + \o If the session \l isOpen() and is bound to a QNetworkConfiguration of type + UserChoice, this property returns the identifier of the QNetworkConfiguration that the + configuration resolved to when \l open() was called; otherwise an empty string. + + The purpose of this key is to determine the real QNetworkConfiguration that the + session is using. This key is different to \i ActiveConfiguration in that + this key may return an identifier for either a + \l {QNetworkConfiguration::ServiceNetwork}{service network} or a + \l {QNetworkConfiguration::InternetAccessPoint}{Internet access points} configurations + whereas \i ActiveConfiguration always returns identifiers to + \l {QNetworkConfiguration::InternetAccessPoint}{Internet access points} configurations. + \row + \o ConnectInBackground + \o Setting this property to \i true before calling \l open() implies that the connection attempt + is made but if no connection can be established, the user is not connsulted and asked to select + a suitable connection. This property is not set by default and support for it depends on the platform. + \endtable +*/ +QVariant QNetworkSession::sessionProperty(const QString& key) const +{ + if (!d->publicConfig.isValid()) + return QVariant(); + + if (key == "ActiveConfiguration") { + if (!d->isOpen) + return QString(); + else + return d->activeConfig.identifier(); + } + + if (key == "UserChoiceConfiguration") { + if (!d->isOpen || d->publicConfig.type() != QNetworkConfiguration::UserChoice) + return QString(); + + if (d->serviceConfig.isValid()) + return d->serviceConfig.identifier(); + else + return d->activeConfig.identifier(); + } + + return d->sessionProperty(key); +} + +/*! + Sets the property \a value on the session. The property is identified using + \a key. Removing an already set property can be achieved by passing an + invalid QVariant. + + Note that the \i UserChoiceConfiguration and \i ActiveConfiguration + properties are read only and cannot be changed using this method. +*/ +void QNetworkSession::setSessionProperty(const QString& key, const QVariant& value) +{ + if (key == "ActiveConfiguration" + || key == "UserChoiceConfiguration") + return; + + d->setSessionProperty(key, value); +} + +/*! + Instructs the session to roam to the new access point. The old access point remains active + until the application calls accept(). + + The newConfigurationActivated() signal is emitted once roaming has been completed. + + \sa accept() +*/ +void QNetworkSession::migrate() +{ + d->migrate(); +} + +/*! + This function indicates that the application does not wish to roam the session. + + \sa migrate() +*/ +void QNetworkSession::ignore() +{ + // Needed on at least Symbian platform: the roaming must be explicitly + // ignore()'d or migrate()'d + d->ignore(); +} + +/*! + Instructs the session to permanently accept the new access point. Once this function + has been called the session may not return to the old access point. + + The old access point may be closed in the process if there are no other network sessions for it. + Therefore any open socket that still uses the old access point + may become unusable and should be closed before completing the migration. +*/ +void QNetworkSession::accept() +{ + d->accept(); +} + +/*! + The new access point is not suitable for the application. By calling this function the + session returns to the previous access point/configuration. This action may invalidate + any socket that has been created via the not desired access point. + + \sa accept() +*/ +void QNetworkSession::reject() +{ + d->reject(); +} + + +/*! + Returns the amount of data sent in bytes; otherwise 0. + + This field value includes the usage across all open network + sessions which use the same network interface. + + If the session is based on a service network configuration the number of + sent bytes across all active member configurations are returned. + + This function may not always be supported on all platforms and returns + 0. The platform capability can be detected via QNetworkConfigurationManager::DataStatistics. +*/ +quint64 QNetworkSession::bytesWritten() const +{ + return d->bytesWritten(); +} + +/*! + Returns the amount of data received in bytes; otherwise 0. + + This field value includes the usage across all open network + sessions which use the same network interface. + + If the session is based on a service network configuration the number of + sent bytes across all active member configurations are returned. + + This function may not always be supported on all platforms and returns + 0. The platform capability can be detected via QNetworkConfigurationManager::DataStatistics. +*/ +quint64 QNetworkSession::bytesReceived() const +{ + return d->bytesReceived(); +} + +/*! + Returns the number of seconds that the session has been active. +*/ +quint64 QNetworkSession::activeTime() const +{ + return d->activeTime(); +} + +/*! + \internal + + This function is required to detect whether the client wants to control + the roaming process. If he connects to preferredConfigurationChanged() signal + he intends to influence it. Otherwise QNetworkSession always roams + without registering this session as a stakeholder in the roaming process. + + For more details check the Forced vs ALR roaming section in the QNetworkSession + class description. +*/ +void QNetworkSession::connectNotify(const char *signal) +{ + QObject::connectNotify(signal); + //check for preferredConfigurationChanged() signal connect notification + //This is not required on all platforms +#ifdef Q_OS_SYMBIAN + if (qstrcmp(signal, SIGNAL(preferredConfigurationChanged(QNetworkConfiguration,bool))) == 0) { + d->setALREnabled(true); + } +#endif +} + +/*! + \internal + + This function is called when the client disconnects from the preferredConfigurationChanged() + signal. + + \sa connectNotify() +*/ +void QNetworkSession::disconnectNotify(const char *signal) +{ + QObject::disconnectNotify(signal); + //check for preferredConfigurationChanged() signal disconnect notification + //This is not required on all platforms +#ifdef Q_OS_SYMBIAN + if (qstrcmp(signal, SIGNAL(preferredConfigurationChanged(QNetworkConfiguration,bool))) == 0) { + d->setALREnabled(false); + } +#endif +} + +#include "moc_qnetworksession.cpp" + +QTM_END_NAMESPACE