--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mtptransports/mtpusbtransport/usbsic_imp/src/cmtpusbepcontrol.cpp	Tue Feb 02 01:11:40 2010 +0200
@@ -0,0 +1,214 @@
+// Copyright (c) 2006-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+
+/**
+ @file
+ @internalComponent
+*/
+
+#include "cmtpusbconnection.h"
+#include "cmtpusbepcontrol.h"
+#include "mtpusbpanic.h"
+#include "mtpusbtransportconstants.h"
+
+// Class constants.
+__FLOG_STMT(_LIT8(KComponent,"UsbEpControl");)
+
+/**
+USB MTP device class control endpoint data transfer controller factory method.
+@param aId The internal endpoint identifier of the endpoint.
+@param aConnection USB MTP device class transport connection which controls 
+the endpoint.
+@return A pointer to an USB MTP device class control endpoint data transfer 
+controller. Ownership IS transfered.
+@leave One of the system wide error codes, if a processing failure occurs.
+*/
+CMTPUsbEpControl* CMTPUsbEpControl::NewL(TUint aId, CMTPUsbConnection& aConnection)
+    {
+    CMTPUsbEpControl* self = new(ELeave) CMTPUsbEpControl(aId, aConnection);
+    CleanupStack::PushL(self);
+    
+#ifdef __FLOG_ACTIVE    
+    self->ConstructL(KComponent);
+#else
+    self->ConstructL();
+#endif
+
+    CleanupStack::Pop(self);
+    return self;    
+    }
+
+/**
+Destructor.
+*/
+CMTPUsbEpControl::~CMTPUsbEpControl()
+    {
+    __FLOG(_L8("~CMTPUsbEpControl - Entry"));
+    __FLOG(_L8("~CMTPUsbEpControl - Exit"));
+    }
+
+/**
+Initiates an USB MTP device class specific request data receive sequence.
+@param aData The control request data sink buffer.
+@leave One of the system wide error codes, if a processing failure occurs.
+*/
+void CMTPUsbEpControl::ReceiveControlRequestDataL(MMTPType& aData)
+    {
+    __FLOG(_L8("ReceiveControlRequestDataL - Entry"));
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    __ASSERT_DEBUG((iState == EControlRequestSetupComplete), Panic(EMTPUsbBadState));
+    
+    // Pass the bulk data sink buffer to the base class and update state..
+    ReceiveDataL(aData);
+    SetState(EControlRequestDataReceive);
+    
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    __FLOG(_L8("ReceiveControlRequestDataL - Exit"));
+    }
+
+/**
+Initiates an USB MTP device class specific request request processing sequence.
+@param aData The control request setup data sink buffer.
+@leave One of the system wide error codes, if a processing failure occurs.
+*/
+void CMTPUsbEpControl::ReceiveControlRequestSetupL(MMTPType& aData)
+    {
+    __FLOG(_L8("ReceiveControlRequestSetupL - Entry"));
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    __ASSERT_DEBUG((iState == EIdle), Panic(EMTPUsbBadState));
+    
+    // Pass the bulk data sink buffer to the base class and update state.
+    ReceiveDataL(aData);
+    SetState(EControlRequestSetupPending);
+    
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    __FLOG(_L8("ReceiveControlRequestSetupL - Exit"));
+    }
+
+/**
+Initiates an USB MTP device class specific request data send sequence.
+@param aData The control request data source buffer.
+@leave One of the system wide error codes, if a processing failure occurs.
+*/
+void CMTPUsbEpControl::SendControlRequestDataL(const MMTPType& aData)
+    {
+    __FLOG(_L8("SendControlRequestDataL - Entry"));
+    __ASSERT_DEBUG((iState == EControlRequestSetupComplete), Panic(EMTPUsbBadState));
+    
+    // Pass the bulk data source buffer to the base class and update state.
+    SendDataL(aData);
+    SetState(EControlRequestDataSend);
+    
+    __FLOG(_L8("SendControlRequestDataL - Exit"));
+    }
+
+/**
+Concludes an USB MTP device class specific request request processing sequence.
+*/
+void CMTPUsbEpControl::SendControlRequestStatus()
+    {
+    __FLOG(_L8("SendControlRequestStatus - Entry"));
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    __ASSERT_DEBUG(((iState == EControlRequestStatusSend) || (iState == EControlRequestSetupComplete)), Panic(EMTPUsbBadState));
+    TInt ret = Connection().Ldd().SendEp0StatusPacket();
+    __FLOG_VA((_L8("SendEp0StatusPacket result = %d."), ret));
+    SetState(EIdle);
+    __FLOG_VA((_L8("CMTPUsbEpControl state on exit = %d"), iState));
+    __FLOG(_L8("SendControlRequestStatus - Exit"));
+    }
+    
+void CMTPUsbEpControl::ReceiveDataCompleteL(TInt aError, MMTPType& aSink)
+    {
+    __FLOG(_L8("ReceiveDataCompleteL - Entry"));
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    switch (iState)
+        {
+    case EControlRequestSetupPending:
+        SetState(EControlRequestSetupComplete);
+        Connection().ReceiveControlRequestSetupCompleteL(aError, aSink);
+        break;          
+        
+    case EControlRequestDataReceive:
+        SetState(EControlRequestStatusSend);
+        Connection().ReceiveControlRequestDataCompleteL(aError, aSink);
+        break;  
+    
+    case EIdle:
+    	// State will be EIdle if CancelReceive is called
+    	break;
+    	
+    case EControlRequestSetupComplete:
+    case EControlRequestDataSend:
+    case EControlRequestStatusSend:
+    default:
+        __DEBUG_ONLY(Panic(EMTPUsbBadState));
+        break;          
+        }
+    if(aError != KErrNone)
+	    {
+	    // Reset the internal state to idle.
+	    SetState(EIdle);
+	    }
+    __FLOG_VA((_L8("CMTPUsbEpControl state on exit = %d"), iState));
+    __FLOG(_L8("ReceiveDataCompleteL - Exit"));
+    }
+    
+void CMTPUsbEpControl::SendDataCompleteL(TInt aError, const MMTPType& aSource)
+    {
+    __FLOG(_L8("SendDataCompleteL - Entry"));
+    __FLOG_VA((_L8("CMTPUsbEpControl state on entry = %d"), iState));
+    __ASSERT_DEBUG((iState == EControlRequestDataSend), Panic(EMTPUsbBadState));
+    SetState(EIdle);
+    Connection().SendControlRequestDataCompleteL(aError, aSource);        
+    __FLOG_VA((_L8("CMTPUsbEpControl state on exit = %d"), iState));
+    __FLOG(_L8("SendDataCompleteL - Exit"));
+    }    
+    
+/**
+Constructor.
+@param aId The internal endpoint identifier of the endpoint.
+@param aConnection USB MTP device class transport connection which controls 
+the endpoint.
+*/
+CMTPUsbEpControl::CMTPUsbEpControl(TUint aId, CMTPUsbConnection& aConnection) :
+    CMTPUsbEpBase(aId, EPriorityStandard, aConnection)
+    {
+
+    }
+
+/**
+Sets the endpoint data send/receive state variable.
+@param aState The new data stream state.
+*/
+void CMTPUsbEpControl::SetState(TUint aState)
+    {
+    __FLOG(_L8("SetState - Entry"));
+    iState = aState;
+    __FLOG_VA((_L8("State set to %d"), iState));
+    __FLOG(_L8("SetState - Exit"));
+    }
+/**
+Overide this method derived from base class.
+reset the state.
+*/      
+void CMTPUsbEpControl::DoCancel()
+	{
+	__FLOG(_L8("DoCancel - Entry"));
+	CMTPUsbEpBase::DoCancel();
+	SetState(EIdle);
+	__FLOG(_L8("DoCancel - Exit"));
+	}
+	
+