/*

* Copyright (c) 2007 Nokia Corporation and/or its subsidiary(-ies). 

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  Internal Central Repository keys.

 *

 *

*/

#ifndef LOCK_DOMAIN_CR_KEYS_H

#define LOCK_DOMAIN_CR_KEYS_H

// INCLUDES

#include <centralrepository.h>

const TUid KCRUidLockConf = { 0x10283322 };

/**

 * Products must configure this value depending on 

 * what lock/unlock approach is supported by the device hardware

 *

 * Possible product modes are are:

 *

 * EKeyguardDefaultHardware = 0 // no addional hardware support

 * EKeyguardOnePositionSwitch = 1 // one position spring adjusted switch

 * EKeyguardTwoPositionSwitch = 2 // on-off type keyguard switch

 *

 * EKeyguardDefaultHardware is default in the platform.

 */

const TUint32 KKeyguardHardwareConf = 0x00000001;

enum TLockHardware

    {

    EKeyguardDefaultHardware = 0,

    EKeyguardOnePositionSwitch,

    EKeyguardTwoPositionSwitch

    };

/**

 * Products and applications can set on run-time if keyguard

 * feature should be momentarily disabled/enabled.

 *

 * Possible run-time modes are are:

 *

 * EKeyguardNotAllowed = 0 // enabling keyguard is not allowed

 * EKeyguardAllowed = 1 // keyguard works normally

 *

 * EKeyguardAllowed is default in the platform.

 */    

const TUint32 KLockKeyguardAllow = 0x00000002;

enum TKeyguardAllow

    {

    EKeyguardNotAllowed = 0,

    EKeyguardAllowed = 1,

    };

/**

 * Products and applications can configure lock timer 

 * interval in microseconds.

 *

 * KLockDefaultInterval of 2000000 microseconds is default in the platform.

 */       

const TUint32 KLockTimerInterval = 0x00000003;

/**

 * Products and applications can change between different  

 * Keylock policy configurations by changing policy mode.

 * 

 * Possible run-time modes are are:

 *

 * ELockDefault = 0 // Used key configuration in default setup

 * ELockSlider = 1 // Used key configuration in slider setup

 * 

 * Products can define new modes if needed.

 * 

 * Configuration ELockDefault is default in the platform.

 */       

const TUint32 KLockPolicyMode = 0x00000004;

/**  

 * Physical keys (scan code) used for locking/unlocking/query have been stored 

 * in central repository keys with identification value of defined as     

 * 0x000000XX Key configurations supported in the mode+type, e.g. 00 = left soft key + right soft key, 01 = left soft key + Fn

 * 0x00000X00 Key code sequence number. 1 = primary key , 2 = secondary key

 * 0x0000X000 from TLockPolicyType, 1= activate lock, 2 = deactivate lock, 3 = devicelock query

 * 0x000X0000 from TLockPolicyMode, 1 = default configuration, 2 = slider configuration

 *

 * The default platform locking/unlocking/query configurations have been listed below.

 */    

/**

 * Pre-defined policymodes, 1 = default configuration, 2 = slider configuration

 * Modes are identified in a hexadecimal reserved in mask 0x000X0000.

 */

enum TLockPolicyMode

    {

    ELockNone = 0,

    ELockDefault = 1,

    ELockSlider = 2,

    };

/**

 * Key code sequence number. 1 = primary key , 2 = secondary key.

 * Key number is identified in a hexadecimal reserved in mask 0x00000X00.

 */

const TUint32 KLockFirstPrimaryKey = 0x00000100;

const TUint32 KLockFirstSecondaryKey= 0x00000200;

/**

 * ============================================================================

 * Policy mode default (left soft key+* for unlock/lock and left soft key for device lock)

 * (not used directly)

 * ============================================================================

 */ 

/**

 * First scan code key used for locking the phone in the default mode.

 * Works when mode = ELockDefault and type = EActivateKeyguard.

 * Default value is left soft key value with scan code 0xa4.

 */

const TUint32 KLockDefaultLockPrimaryConf00 = 0x00011100;

/**

 * Second scan code key used for locking the phone in the default mode.

 * Works when mode = ELockDefault and type = EActivateKeyguard.

 * Default value is star key on ITU-keypad with scan code 0x2a.

 */

const TUint32 KLockDefaultLockSecondaryConf00 = 0x00011200;

/**

 * First scan code key used for unlocking the phone in the default mode.

 * Works when mode = ELockDefault and type = EDeactivateKeyguard.

 * Default value is left soft key with scan code 0xa4.

 */

const TUint32 KLockDefaultUnlockPrimaryConf00 = 0x00012100;

/**

 * Second scan code key used for unlocking the phone in the default mode.

 * Works when mode = ELockDefault and type = EDeactivateKeyguard.

 * Default value is star key with scan code 0x2a.

 */

const TUint32 KLockDefaultUnlockSecondaryConf00 = 0x00012200;

/**

 * Scan code key used for showing security query when device is locked 

 * in the default mode.

 * Works when mode = ELockDefault and type = EDevicelockQuery.

 * Default value is left soft key with scan code 0xa4.

 */

const TUint32 KLockDefaultSecQueryPrimaryConf00 = 0x00013100;

/**

 * ============================================================================

 * Policy mode slider (left soft key+right soft key for unlock/lock and left soft key for device lock)

 * (not used directly)

 * ============================================================================

 */ 

/**

 * First scan code key used for locking the phone in the slider mode.

 * Works when mode = ELockSlider and type = EActivateKeyguard.

 * Default value is left soft key with scan code 0xa4.

 */

const TUint32 KLockSliderLockPrimaryConf00 = 0x00021100;

/**

 * Second scan code key used for locking the phone in the slider mode.

 * Works when mode = ELockSlider and type = EActivateKeyguard.

 * Default value is right soft key with scan code 0xa5.

 */

const TUint32 KLockSliderLockSecondaryConf00 = 0x00021200;

/**

 * First scan code key used for unlocking the phone in the slider mode.

 * Works when mode = ELockSlider and type = EDeactivateKeyguard.

 * Default value is left soft key with scan code 0xa4.

 */

const TUint32 KLockSliderUnlockPrimaryConf00 = 0x00022100;

/**

 * Second scan code key used for unlocking the phone in the slider mode.

 * Works when mode = ELockSlider and type = EDeactivateKeyguard.

 * Default value is right soft key with scan code 0xa5.

 */

const TUint32 KLockSliderUnlockSecondaryConf00 = 0x00022200;

/**

 * Scan code key used for showing security query when device is locked 

 * in the slider mode.

 * Works when mode = ELockSlider and type = EDevicelockQuery.

 * Default value is left soft key with scan code 0xa4.

 */

const TUint32 KLockSliderSecQueryPrimaryConf00 = 0x00023100;

#endif

// End of file