# This is the global environment file to configure the MMC/SD on device specific
# The current MMC/SD card values are configured for TI OMAP 2420 (H4) hardware.
# Licencees may need to configure below values to specific devices 

#Logical Device Driver developed to test MMC/SD controller 
[logicaldevice]
lddname			=D_MMCSDIF

[stack]
# Stack Number- Symbian Stack supports only Single cards at a time
stackno			=0

[cardinfo]
# Card Number
cardnumber		=0

[psuinfo]
# Power Supply information supported by the platform

# OCR from 3.1V to 3.2V (H4 voltage is 3.11V)
#voltage in OCR Register 32 Bit Format (Hexa Decimal)
supported_voltage	=0x00ff8000

#Current in MicroAmps
current			=0

#Voltage Interval
voltageinterval		=0

#Voltage Check
voltagecheck		=EDPsuChkComparator

#Inactivity count
inactivitycount		=0

#Notlockedcount
notlockedcount		=0

#Timeout for PowerDown in seconds
psuinactivitytimeOut	=10

#Bus not locked timeout period, in seconds
notlockedtimeOut	=10

#Lock State
lockstate		=EFalse

#Psu OFF
psuoff			=EFalse
[busstate]
cardbusstate		=EBusOn

[powersupply]
#power supply unit number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
unit			=0

#Psu current Limit IsSafe?##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
curlimit		=0

#power supply state
initvccstate		=EDPsuOff

[mediachange]
#Media Change Number ##Note## OMAP2420 Platform Not supported,Value is Reserved for other platforms
mcID			=0

[mediastate]
#Initial Media State
initialstate		=EClosed

#Force Media Change support
forcedstate		=EClosed

#Standbymode ON/OFF
standbymode 		=EFalse

#Replay Event Counts
eventcount		=0

#Bus type
bustype			=0

[bufferinfo]
#buflen
buflen			=266240

[machineinfo]
#machineinfo
expectedtotalsockets			=1
expectedtotalmediachanges		=0
expectedtotalprimarysupplies		=0
expectedbasebusnumber			=0
expectedspimode				=FALSE
hasflagsupportsspimode			=FALSE
hasflagsupportsdoublebuffering		=FALSE
hasflagsupportsr7			=TRUE
hasflagmaxtransferlength256k		=FALSE
hasflagmaxtransferlength512k		=FALSE
hasflagmaxtransferlength1m		=FALSE
hasflagmaxtransferlength2m		=FALSE
hasflagmaxtransferlength4m		=FALSE
hasflagmaxtransferlength8m		=FALSE
hasflagmaxtransferlength16m		=FALSE
hasflagdma8bitaddressing		=FALSE
hasflagdma16bitaddressing		=FALSE
hasflagdma32bitaddressing		=FALSE
hasflagdma64bitaddressing		=FALSE
hasflagsupportsdma			=FALSE

[partialreadinfo]
prdstart1				=0
prdend1					=512
expectedprdstart1			=0
expectedprdend1				=512
prdstart2				=0
prdend2					=4096
expectedprdstart2		=0
expectedprdend2			=512
prdstart3				=0
prdend3					=256
expectedprdstart3		=0
expectedprdend3			=512
prdstart4				=127
prdend4					=719
expectedprdstart4		=0
expectedprdend4			=512


[stacktests]
#stacktests
expectedasyncerror0004			=1
expectedstateoff			=EPBusOff
expectedstateon				=EPBusOn

[devinfo]
maxcards				=1
programperiodms				=1

[cardpdata]
transferspeed				=42
readcurrentinmilliamps 			=45