//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all published partner elements of the TSEID class

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedPartner APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Wekey Weng

//! @SYMCreationDate			10/03/2008

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	T_BTUserAPI

DELAY		500

// ****************************************************************************

// TSEID

// **************************************************************************** 

START_TESTCASE BT-USER-SEID-PublishedPartner-0001

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0001

//! @SYMAPI                     TSEID::TSEID()

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Default constructor using KInvalidSEID as the stream endpoint identifier (SEID) value

//! @SYMTestActions             1. Create a TSEID object using default constructor

//!                             2. Destruct.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            Low

//! @SYMTestExpectedResults     TSEID object is created successfully

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new

            COMMAND         seid        ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0001

START_TESTCASE BT-USER-SEID-PublishedPartner-0002

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0002

//! @SYMAPI                     TSEID::TSEID(TUint, TBool)

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Construct a TSEID with stream endpoint identifier (SEID), and a local or remote endpoint values.

//! @SYMTestActions             1. Create a TSEID object referring to a local endpoint with 0

//!                             2. Destruct the TSEID object.

//!                             3. Create a TSEID object referring to a remote endpoint with 0

//!                             4. Destruct the TSEID object.

//!                             5. Create a TSEID object referring to a local endpoint with 4294967295

//!                             6. Destruct the TSEID object.

//!                             7. Create a TSEID object referring to a remote endpoint with 4294967295

//!                             8. Destruct the TSEID object.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            Low

//! @SYMTestExpectedResults     1. TSEID objects are created successfully

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new     BT-USER-SEID-PublishedPartner-0002-0001-new_Command1

            COMMAND         seid        ~

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid        new     BT-USER-SEID-PublishedPartner-0002-0001-new_Command3

            COMMAND         seid        ~

            CREATE_OBJECT   TSEID       seid3

            COMMAND         seid2       new     BT-USER-SEID-PublishedPartner-0002-0001-new_Command5

            COMMAND         seid2       ~

            CREATE_OBJECT   TSEID       seid4

            COMMAND         seid2       new     BT-USER-SEID-PublishedPartner-0002-0001-new_Command7

            COMMAND         seid2       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0002

START_TESTCASE BT-USER-SEID-PublishedPartner-0003

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0003

//! @SYMAPI                     TSEID::SEID()

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Get the stream endpoint identifier (SEID) value

//! @SYMTestActions             1. Create a TSEID object using default constructor

//!                             2. Create 2 TSEID objects with same SEID

//!                             2.1 Create a TSEID object for local with SEID(10)

//!                             2.2 Create a TSEID object for remote with SEID(10)

//!                             3. Get the SEIDs of all TSEID objects 

//!                             3.1 Get the SEID of object created by default constructor

//!                             3.2 Get the SEID of object referring to a local endpoint

//!                             3.3 Get the SEID of object referring to a remote endpoint

//!                             4. Destruct the 3 TSEID objects.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            High

//! @SYMTestExpectedResults     1. Get SEIDs as expected and no panic caused

//!                             1.1 Step 3.1 returns KInvalidSEID

//!                             1.2 Step 3.2 returns 10

//!                             1.3 Step 3.3 returns 10

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new     

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid2       new     BT-USER-SEID-PublishedPartner-0003-0001-new_Command2

            CREATE_OBJECT   TSEID       seid3

            COMMAND         seid3       new     BT-USER-SEID-PublishedPartner-0003-0001-new_Command3

            COMMAND         seid        SEID    BT-USER-SEID-PublishedPartner-0003-0001-SEID_Command4

            COMMAND         seid2       SEID    BT-USER-SEID-PublishedPartner-0003-0001-SEID_Command5

            COMMAND         seid3       SEID    BT-USER-SEID-PublishedPartner-0003-0001-SEID_Command6

            COMMAND         seid        ~

            COMMAND         seid2       ~

            COMMAND         seid3       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0003

START_TESTCASE BT-USER-SEID-PublishedPartner-0004

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0004

//! @SYMAPI                     TSEID::IsValid()

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Checks whether the SEID is allowed by the AVDTP Specification(1~63)

//! @SYMTestActions             1. Create a TSEID object using default constructor

//!                             2. Create 3 TSEID objects

//!                             2.1 Create a TSEID object with value(0)

//!                             2.2 Create a TSEID object with value(63)

//!                             2.3 Create a TSEID object with value(64)

//!                             3. Check whether the SEID is allowed 

//!                             3.1 Check the TSEID object created by default constructor

//!                             3.2 Check the TSEID with value(0)

//!                             3.3 Check the TSEID with value(63)

//!                             3.4 Check the TSEID with value(64)

//!                             4. Destruct the 3 TSEID objects.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            High

//! @SYMTestExpectedResults     1. No panic caused and return expected value

//!                             1.1 Step 3.1 returns EFalse

//!                             1.1 Step 3.2 returns EFalse

//!                             1.2 Step 3.3 returns ETrue

//!                             1.3 Step 3.4 returns EFalse

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new     

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid2       new         BT-USER-SEID-PublishedPartner-0004-0001-new_Command2

            CREATE_OBJECT   TSEID       seid3

            COMMAND         seid3       new         BT-USER-SEID-PublishedPartner-0004-0001-new_Command3

            CREATE_OBJECT   TSEID       seid4

            COMMAND         seid4       new         BT-USER-SEID-PublishedPartner-0004-0001-new_Command4

            COMMAND         seid        IsValid     BT-USER-SEID-PublishedPartner-0004-0001-IsValid_Command5

            COMMAND         seid2       IsValid     BT-USER-SEID-PublishedPartner-0004-0001-IsValid_Command6

            COMMAND         seid3       IsValid     BT-USER-SEID-PublishedPartner-0004-0001-IsValid_Command7

            COMMAND         seid4       IsValid     BT-USER-SEID-PublishedPartner-0004-0001-IsValid_Command8

            COMMAND         seid        ~

            COMMAND         seid2       ~

            COMMAND         seid3       ~

            COMMAND         seid4       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0004

START_TESTCASE BT-USER-SEID-PublishedPartner-0005

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0005

//! @SYMAPI                     TSEID::operator==(TSEID)

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Comparison operator between 2 TSED objects created by different conditions

//! @SYMTestActions             1. Create 2 TSEID objects using default constructor

//!                             2. Create 4 TSEID objects

//!                             2.1 Create 2 TSEID objects for local with SEID(10)

//!                             2.2 Create a TSEID object for remote with SEID(10)

//!                             2.3 Create a TSEID object for local with SEID(20)

//!                             3. Compare TSEID objects 

//!                             3.1 Compare 2 objects created by default constructor

//!                             3.2 Compare 1 object created by default constructor to another object(remote) with SEID(10)

//!                             3.3 Compare 2 objects both referring to local but different SEID(10 and 20)

//!                             3.4 Compare 1 object(local) to another object(remote) with same SEID(10)

//!                             3.5 Compare 2 objects both referring to local with same SEID(10)

//!                             4. Destruct the 6 TSEID objects.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            High

//! @SYMTestExpectedResults     1. Compare 2 objects returns expected value and no panic caused

//!                             1.1 Step 3.1 returns ETrue

//!                             1.2 Step 3.2 returns EFalse

//!                             1.3 Step 3.3 returns EFalse

//!                             1.4 Step 3.4 returns EFalse

//!                             1.5 Step 3.5 returns ETrue

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new     

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid2       new         

            CREATE_OBJECT   TSEID       seid3

            COMMAND         seid3       new         BT-USER-SEID-PublishedPartner-0005-0001-new_Command3 

            CREATE_OBJECT   TSEID       seid4

            COMMAND         seid4       new         BT-USER-SEID-PublishedPartner-0005-0001-new_Command4 

            CREATE_OBJECT   TSEID       seid5

            COMMAND         seid5       new         BT-USER-SEID-PublishedPartner-0005-0001-new_Command5 

            CREATE_OBJECT   TSEID       seid6

            COMMAND         seid6       new         BT-USER-SEID-PublishedPartner-0005-0001-new_Command6 

            COMMAND         seid        ==          BT-USER-SEID-PublishedPartner-0005-0001-==_Command7

            COMMAND         seid        ==          BT-USER-SEID-PublishedPartner-0005-0001-==_Command8

            COMMAND         seid3       ==          BT-USER-SEID-PublishedPartner-0005-0001-==_Command9

            COMMAND         seid4       ==          BT-USER-SEID-PublishedPartner-0005-0001-==_Command10

            COMMAND         seid3       ==          BT-USER-SEID-PublishedPartner-0005-0001-==_Command11

            COMMAND         seid        ~

            COMMAND         seid2       ~

            COMMAND         seid3       ~

            COMMAND         seid4       ~

            COMMAND         seid5       ~

            COMMAND         seid6       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0005

START_TESTCASE BT-USER-SEID-PublishedPartner-0006

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0006

//! @SYMAPI                     TSEID::operator!=(TSEID)

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Negative comparison operator between 2 TSED objects created by different conditions

//! @SYMTestActions             1. Create 2 TSEID objects using default constructor

//!                             2. Create 4 TSEID objects

//!                             2.1 Create 2 TSEID objects for local with SEID(10)

//!                             2.2 Create a TSEID object for remote with SEID(10)

//!                             2.3 Create a TSEID object for local with SEID(20)

//!                             3. Negative comparison between 2 TSEID object 

//!                             3.1 Negative comparison between 2 objects created by default constructor

//!                             3.2 Negative comparison between 1 object created by default constructor and another object(remote) with SEID(10)

//!                             3.3 Negative comparison between 2 objects both referring to local but different SEID(10 and 20)

//!                             3.4 Negative comparison between 1 object(local) and another object(remote) with same SEID(10)

//!                             3.5 Negative comparison between 2 objects both referring to local with same SEID(10)

//!                             4. Destruct the 6 TSEID objects.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            High

//! @SYMTestExpectedResults     1. Negative comparison between 2 objects returns expected value and no panic caused

//!                             1.1 Step 3.1 returns EFalse

//!                             1.2 Step 3.2 returns ETrue

//!                             1.3 Step 3.3 returns ETrue

//!                             1.4 Step 3.4 returns ETrue

//!                             1.5 Step 3.5 returns EFalse

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new     

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid2       new         

            CREATE_OBJECT   TSEID       seid3

            COMMAND         seid3       new         BT-USER-SEID-PublishedPartner-0006-0001-new_Command3 

            CREATE_OBJECT   TSEID       seid4

            COMMAND         seid4       new         BT-USER-SEID-PublishedPartner-0006-0001-new_Command4 

            CREATE_OBJECT   TSEID       seid5

            COMMAND         seid5       new         BT-USER-SEID-PublishedPartner-0006-0001-new_Command5 

            CREATE_OBJECT   TSEID       seid6

            COMMAND         seid6       new         BT-USER-SEID-PublishedPartner-0006-0001-new_Command6 

            COMMAND         seid        !=          BT-USER-SEID-PublishedPartner-0006-0001-!=_Command7

            COMMAND         seid        !=          BT-USER-SEID-PublishedPartner-0006-0001-!=_Command8

            COMMAND         seid3       !=          BT-USER-SEID-PublishedPartner-0006-0001-!=_Command9

            COMMAND         seid4       !=          BT-USER-SEID-PublishedPartner-0006-0001-!=_Command10

            COMMAND         seid3       !=          BT-USER-SEID-PublishedPartner-0006-0001-!=_Command11

            COMMAND         seid        ~

            COMMAND         seid2       ~

            COMMAND         seid3       ~

            COMMAND         seid4       ~

            COMMAND         seid5       ~

            COMMAND         seid6       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0006

START_TESTCASE BT-USER-SEID-PublishedPartner-0007

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0007

//! @SYMAPI                     TSEID::Reset()

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Reset any internal state and values

//! @SYMTestActions             1. Create 1 TSEID object using default constructor

//!                             2. Create 1 TSEID object referring to a local endpoint with SEID(10);

//!                             3. Compare these 2 objects 

//!                             4. Reset the later object

//!                             5. Compare these 2 objects again

//!                             6. Destruct the 2 TSEID objects.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            High

//! @SYMTestExpectedResults     1. Step 3 returns EFalse

//!                             2. Step 4 reset TSEID object without causing panic

//!                             3. Step 5 returns ETrue

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new     

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid2       new         BT-USER-SEID-PublishedPartner-0007-0001-new_Command2

            COMMAND         seid        ==          BT-USER-SEID-PublishedPartner-0007-0001-==_Command3

            COMMAND         seid2       Reset

            COMMAND         seid        ==          BT-USER-SEID-PublishedPartner-0007-0001-==_Command5

            COMMAND         seid        ~

            COMMAND         seid2       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0007

START_TESTCASE BT-USER-SEID-PublishedPartner-0008

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0008

//! @SYMAPI                     TSEID::IsLocal()

//! @SYMAuthor                  Wekey Weng

//! @SYMCreationDate            02/29/2008

//! @SYMTestCaseDesc            Test whether the SEID refers to a local endpoint

//! @SYMTestActions             1. Create 1 TSEID object referring to a local endpoint and 1 TSEID object referring to a remote endpoint with same SEID(10);

//!                             2. Test whether the TSEID object refers to a local endpoint 

//!                             2.1 Test the TSEID created for local

//!                             2.2 Test the TSEID created for remote

//!                             3. Destruct the 2 TSEID objects.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            High

//! @SYMTestExpectedResults     1. Return expected value without causing panic

//!                             1.1. Step 2.1 returns ETrue

//!                             1.2. Step 2.2 returns EFalse

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new         BT-USER-SEID-PublishedPartner-0008-0001-new_Command1

            CREATE_OBJECT   TSEID       seid2

            COMMAND         seid2       new         BT-USER-SEID-PublishedPartner-0008-0001-new_Command2

            COMMAND         seid        IsLocal     BT-USER-SEID-PublishedPartner-0008-0001-IsLocal_Command3

            COMMAND         seid2       IsLocal     BT-USER-SEID-PublishedPartner-0008-0001-IsLocal_Command4

            COMMAND         seid        ~

            COMMAND         seid2       ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0008

START_TESTCASE BT-USER-SEID-PublishedPartner-0012

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0012

//! @SYMAPI                     TSEID::TSEID(TUint, TBool)

//! @SYMAuthor                  Jason Lin

//! @SYMCreationDate            03/25/2008

//! @SYMTestCaseDesc            Constructor taking a stream endpoint identifier (SEID) value, and whether it refers to a local or remote endpoint 

//! @SYMTestActions             1. Create a TSEID object referring to a local endpoint with 0

//!                             2. Check the TSEID object refers to a local endpoint

//!                             3. Destruct the TSEID object.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            Low

//! @SYMTestExpectedResults     1. TSEID objects are created successfully, and the methods are called without any panic

//!                             2.1 Step 2 return ETrue

//!                             2.2 Destruct TSEID object successfully

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new         BT-USER-SEID-PublishedPartner-0012-0001-new_Command1

            COMMAND         seid        IsLocal     BT-USER-SEID-PublishedPartner-0012-0001-IsLocal_Command2

            COMMAND         seid        ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0012

START_TESTCASE BT-USER-SEID-PublishedPartner-0013

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0013

//! @SYMAPI                     TSEID::TSEID(TUint, TBool)

//! @SYMAuthor                  Jason Lin

//! @SYMCreationDate            03/25/2008

//! @SYMTestCaseDesc            Constructor taking a stream endpoint identifier (SEID) value, and whether it refers to a local or remote endpoint 

//! @SYMTestActions             1. Create a TSEID object referring to a remote endpoint with 0

//!                             2. Check the TSEID object refers to a remote endpoint

//!                             3. Destruct the TSEID object.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            Low

//! @SYMTestExpectedResults     1. TSEID objects are created successfully, and the methods are called without any panic

//!                             2.1 Step 2 return EFalse

//!                             2.2 Destruct TSEID object successfully

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new         BT-USER-SEID-PublishedPartner-0013-0001-new_Command1

            COMMAND         seid        IsLocal     BT-USER-SEID-PublishedPartner-0013-0001-IsLocal_Command2

            COMMAND         seid        ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0013

START_TESTCASE BT-USER-SEID-PublishedPartner-0014

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0014

//! @SYMAPI                     TSEID::TSEID(TUint, TBool)

//! @SYMAuthor                  Jason Lin

//! @SYMCreationDate            03/25/2008

//! @SYMTestCaseDesc            Constructor taking a stream endpoint identifier (SEID) value, and whether it refers to a local or remote endpoint 

//! @SYMTestActions             1. Create a TSEID object referring to a local endpoint with 268435456(0x10000000)

//!                             2. Check the TSEID object refers to a local endpoint

//!                             3. Destruct the TSEID object.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            Low

//! @SYMTestExpectedResults     1. TSEID objects are created successfully, and the methods are called without any panic

//!                             2.1 Step 2 return ETrue

//!                             2.2 Destruct TSEID object successfully

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new         BT-USER-SEID-PublishedPartner-0014-0001-new_Command1

            COMMAND         seid        IsLocal     BT-USER-SEID-PublishedPartner-0014-0001-IsLocal_Command2

            COMMAND         seid        ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0014

START_TESTCASE BT-USER-SEID-PublishedPartner-0015

//! @SYMTestCaseID              BT-USER-SEID-PublishedPartner-0015

//! @SYMAPI                     TSEID::TSEID(TUint, TBool)

//! @SYMAuthor                  Jason Lin

//! @SYMCreationDate            03/25/2008

//! @SYMTestCaseDesc            Constructor taking a stream endpoint identifier (SEID) value, and whether it refers to a local or remote endpoint 

//! @SYMTestActions             1. Create a TSEID object referring to a remote endpoint with 268435456(0x10000000)

//!                             2. Check the TSEID object refers to a remote endpoint

//!                             3. Destruct the TSEID object.

//! @SYMTestStatus              Implemented

//! @SYMTestPriority            Low

//! @SYMTestExpectedResults     1. TSEID objects are created successfully, and the methods are called without any panic

//!                             2.1 Step 2 return EFalse

//!                             2.2 Destruct TSEID object successfully

//! @SYMTestType                CIT

    START_TEST_BLOCK    10  T_BTUserAPI         \bluetooth\user\BT-USER-SEID-PublishedPartner.ini

            CREATE_OBJECT   TSEID       seid

            COMMAND         seid        new         BT-USER-SEID-PublishedPartner-0015-0001-new_Command1

            COMMAND         seid        IsLocal     BT-USER-SEID-PublishedPartner-0015-0001-IsLocal_Command2

            COMMAND         seid        ~

    END_TEST_BLOCK

END_TESTCASE BT-USER-SEID-PublishedPartner-0015

DELAY		2000