//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the RBTPhysicalLinkAdapter class

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Ting Yen and PaiHung Huang

//! @SYMCreationDate			11/09/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	T_BTUserAPI	-SharedData

DELAY		500

START_TESTCASE	BT-USER-PublicApi-Slave-SetBTAddresses

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	

			COMMAND		CBluetoothSocket1	RSocketServerConnect		

			COMMAND		CBluetoothSocket1	NewL		BT-USER-PublicApi-Passive-SetBTAddresses-0001command3NewL

			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		

			COMMAND		TL2CAPSockAddr1	SetFamily		BT-USER-PublicApi-Passive-SetBTAddresses-0001command6SetFamily

			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PublicApi-Passive-SetBTAddresses-0001command7SetPort

			COMMAND		CBluetoothSocket1	Bind		BT-USER-PublicApi-Passive-SetBTAddresses-0001command9Bind

			COMMAND		CBluetoothSocket1	Listen		BT-USER-PublicApi-Passive-SetBTAddresses-0001command10Listen

			COMMAND		CBluetoothSessionSocket	SetRsocketServerFromCBTSocket		BT-USER-PublicApi-Passive-SetBTAddresses-0001command12SetRsocketServerFromCBTSocket

			COMMAND		CBluetoothSessionSocket	NewL		BT-USER-PublicApi-Passive-SetBTAddresses-0001command13NewL

			STORE	CBluetoothSocket1	

			STORE	CBluetoothSessionSocket	

			STORE	TL2CAPSockAddr1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	START_TEST_BLOCK	300	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	

			CREATE_OBJECT	TBTDevAddr	TBTDevAddrLocal	

			COMMAND		TBTDevAddrLocal	Construct		

			COMMAND		TBTDevAddrLocal	OpenHostResolver		BT-USER-PublicApi-Passive-SetBTAddresses-0002command3OpenHostResolver

			COMMAND		TBTDevAddrLocal	SetHostNameL		BT-USER-PublicApi-Passive-SetBTAddresses-0002command4SetHostNameL

			COMMAND		TBTDevAddrLocal	SetDiscoverable		

			STORE	CBluetoothSocket1	

			STORE	CBluetoothSessionSocket	

			STORE	TBTDevAddrLocal	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	START_SYNCHRONISED_TESTCASE BT-USER-PublicApi-Active-SetBTAddresses-0003

	START_TEST_BLOCK	300	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	

			COMMAND		CBluetoothSocket1	Accept		BT-USER-PublicApi-Passive-SetBTAddresses-0003command1Accept

			OUTSTANDING	

			STORE	CBluetoothSocket1	

			STORE	CBluetoothSessionSocket	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PublicApi-Active-SetBTAddresses-0003

	START_SYNCHRONISED_TESTCASE BT-USER-PublicApi-Active-SetBTAddresses-0004

	START_TEST_BLOCK	300	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrLocal	

			CREATE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			COMMAND		CBluetoothSessionSocket	Recv		BT-USER-PublicApi-Passive-SetBTAddresses-0004command1Recv

			OUTSTANDING	

			COMMAND		TBTDevAddrLocal	SetBTAddr		BT-USER-PublicApi-Passive-SetBTAddresses-0004command4SetBTAddr

			COMMAND		TBTDevAddrRemote	Construct		

			COMMAND		TBTDevAddrRemote	SetBTAddr		BT-USER-PublicApi-Passive-SetBTAddresses-0004command7SetBTAddr

			STORE	CBluetoothSocket1	

			STORE	CBluetoothSessionSocket	

			STORE	TBTDevAddrRemote	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PublicApi-Active-SetBTAddresses-0004

END_TESTCASE	BT-USER-PublicApi-Slave-SetBTAddresses

DELAY		500

// ****************************************************************************

// RBluetoothPhysicalLinkAdapter

// ****************************************************************************	

// Connected

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0001

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0001

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Check whether the physical link adapter is open

//!								Uses API elements: 	RSocketServ() and Connect() from RSocketServ

//!													NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!													RBTPhysicalLinkAdapterData(), Open()2, IsOpen() and Close() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Create and start a session on the socket server

//!								2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!								3. Bring in a new member to the piconet with a device address using CreateConnection()

//!								   function. Return KErrNone if successful

//!								4. Return callback HandleCreateConnectionCompleteL() function

//!								5. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								6. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								7. Check whether the physical link adapter is open using IsOpen() function

//!								8. Verify that the result (False) is as expected (False)

//!								9. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								10. Check whether the physical link adapter is open using IsOpen() function

//!								11. Verify that the result (True) is as expected (True)

//!								12. Close the physical link adapter using Close() function

//!								13. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		False returned at step 8, True returned at step 11

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			COMMAND		RSocketServData	RSocketServ		

			COMMAND		RSocketServData	Connect		

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0001-0001command5NewL

			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0001-0001command6CreateConnection

			OUTSTANDING	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0001-0001command10IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0001-0001command11Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0001-0001command12IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE	CBluetoothPhysicalLinksData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0001

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0002

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0002

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Block the use of a specified set of low power modes with ESniffMode

//!								Uses API elements: RBTPhysicalLinkAdapterData(), Open()2, IsOpen(), PreventLowPowerModes() and PhysicalLinkState()

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Get the state of the physical link using PhysicalLinkState() function

//!								6. Verify that the result (3178246) is as expected (3178246)

//!								7. Block the use of a specified set of low power modes with ESniffMode using 

//!								   PreventLowPowerModes() function. Return KErrNone if successful

//!								8. Get the state of the physical link using PhysicalLinkState() function

//!								9. Verify that the result (3178246) is as expected (3178246)

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0002-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0002-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0002-0001command5PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	PreventLowPowerModes		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0002-0001command6PreventLowPowerModes

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0002-0001command7PhysicalLinkState

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0002

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0003

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0003

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Block the use of a specified set of low power modes with EHoldMode

//!								Uses API elements: IsOpen(), PreventLowPowerModes() and PhysicalLinkState()

//! @SYMTestActions				1. Check whether the physical link adapter is open using IsOpen() function

//!								2. Verify that the result (True) is as expected (True)

//!								3. Block the use of a specified set of low power modes with EParkMode using 

//!								   PreventLowPowerModes() function. Return KErrNone if successful

//!								4. Get the state of the physical link using PhysicalLinkState() function

//!								5. Verify that the result (3178246) is as expected (3178246)

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0003-0001command2IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PreventLowPowerModes		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0003-0001command3PreventLowPowerModes

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0003-0001command4PhysicalLinkState

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0003

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0004

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0004

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Block a role

//!								Uses API elements: IsOpen(), PreventRoleSwitch(), PhysicalLinkState() and Close()

//! @SYMTestActions				1. Check whether the physical link adapter is open using IsOpen() function

//!								2. Verify that the result (True) is as expected (True)

//!								3. Block a role switch using PreventRoleSwitch() function. Return KErrNone if successful

//!								4. Get the state of the physical link using PhysicalLinkState() function

//!								5. Verify that the result (3178246) is as expected (3178246)

//!								6. Close the physical link adapter using Close() function

//!								7. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0004-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0004-0001command2IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PreventRoleSwitch		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0004-0001command4PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0004-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0004

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0005

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0005

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Ensure this object does not block a role switch

//!								Uses API elements: RBTPhysicalLinkAdapterData(), Open()2, IsOpen(), AllowRoleSwitch(), PhysicalLinkState(), Close() and destructor from RBTPhysicalLinkAdapter

//!													destructor from CBluetoothPhysicalLinks

//!													Close() from RSocketServ

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Ensure this object does not block a role switch using AllowRoleSwitch() function. 

//!								   Return KErrNone if successful

//!								6. Get the state of the physical link using PhysicalLinkState() function

//!								7. Verify that the result (3178245) is as expected (3178245)

//!								8. Close the physical link adapter using Close() function

//!								9. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0005-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0005-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0005-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	AllowRoleSwitch		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0005-0001command6PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0005-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0005

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0006

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0006

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Ensure this object does not block the use of a specified set of low power modes

//!								Uses API elements: RBTPhysicalLinkAdapterData(), Open()2, IsOpen(), AllowLowPowerModes() and PhysicalLinkState()

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Ensure this object does not block the use of a specified set of low power modes with 

//!								   EParkMode using AllowLowPowerModes() function. Return KErrNone if successful

//!								6. Get the state of the physical link using PhysicalLinkState() function

//!								7. Verify that the result (3178257) is as expected (3178257)

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0006-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0006-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	AllowLowPowerModes		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0006-0001command5AllowLowPowerModes

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0002

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0006-0002command1PhysicalLinkState

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0002

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0006

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0007

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0007

//! @SYMAPI						RBTPhysicalLinkAdapter, CBluetoothSocket, MBluetoothSocketNotifier

//! @SYMTestCaseDesc			Update the set of baseband packet types that are allowed locally

//!								Uses API elements: 	RequestChangeSupportedPacketTypes(), PhysicalLinkState() and Close() from RBTPhysicalLinkAdapter

//!													Recv()1 from CBluetoothSocket

//!													HandleReceiveCompleteL() from MBluetoothSocketNotifier

//! @SYMTestActions				1. Update the set of baseband packet types that are allowed locally with EPacketsDM1

//!								   using RequestChangeSupportedPacketTypes() function. Return KErrNone if successful

//!								2. Get the state of the physical link using PhysicalLinkState() function

//!								3. Verify that the result (3178245) is as expected (3178245)

//!								4. Receive data from a remote Bluetooth device using Recv()1 function. Return KErrNone if successful

//!								5. HandleReceiveCompleteL() gets called when we finished receiving data, verify data received

//!								6. Close the physical link adapter using Close() function

//1								7. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0007-0001command2PhysicalLinkState

			COMMAND		CBluetoothSessionSocket	Recv		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0007-0001command4Recv

			OUTSTANDING	

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	CBluetoothSessionSocket	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0007

// ****************************************************************************

// RBluetoothPhysicalLinkAdapter Negative Test Cases

// ****************************************************************************	

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0008

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0008

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Get the state of the physical link

//!								Uses API elements: 	Close() from RSocketServ

//!													destructor from CBluetoothPhysicalLinks

//!													RBTPhysicalLinkAdapterData(), Open()2, IsOpen(), PhysicalLinkState() and Close() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Get the state of the physical link using PhysicalLinkState() function

//!								6. Verify that the result (3178245) is as expected (3178245)

//!								7. Close the physical link adapter

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		The state of the physical link was returned as expected

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0008-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0008-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0008-0001command5PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			STORE	RSocketServData	

			STORE	RBTPhysicalLinkAdapterData	

			STORE	TBTDevAddrRemote	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0008

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0009

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0009

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Block the use of a specified set of lowe power modes (ESniffMode) without opening a physical link adapter

//!								Uses API elements: 	RSocketServ() and Connect() from RSocketServ

//!													NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!													RBTPhysicalLinkAdapterData(), Open()2, IsOpen() and Close() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Verify that if a physical link adapter has not been opened and returned result (False) is as expected

//!								2. Block the use of a specified set of low power modes (ESniffMode)

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		Error at step 2. KErrNotReady (-18) returned

//! @SYMTestType				CIT

	START_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0009-0001

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0009-0001command1IsOpen

			COMMAND		!Error=-18	RBTPhysicalLinkAdapterData	PreventLowPowerModes		BT-USER-PhysicalLinkAdapter-PublicApi-Passive-0009-0001command2PreventLowPowerModes

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	END_SYNCHRONISED_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-0009-0001

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0009

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0010

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0010

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Attempt to be a Bluetooth Slave of a piconet without opening a physical link adapter

//!								Uses API elements: 	Close() and RequestSlaveRole() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Close the physical link adapter

//!								2. Attempt to be a Bluetooth Slave

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		Error at step 2. KErrNotReady (-18) returned

//! @SYMTestType				CIT

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	RequestSlaveRole		

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

END_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0010

START_TESTCASE	BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0011

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Passive-Slave-Auto-0011

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Block the use of a specified set of low power modes without opening a physical link adapter

//!								Uses API elements: 	IsOpen() and PreventLowPowerModes() and IsOpen() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Verify that if a physical link adapter has not been opened and returned result (false) is as expected

//!								2. Block the use of a specified set of low power modes (EAnyLowPowerMode)

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			High

//! @SYMTestExpectedResults		Error at step 2. KErrNotReady (-18) returned

//! @SYMTestType				CIT