# Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

# All rights reserved.

# This component and the accompanying materials are made available

# under the terms of the License "Eclipse Public License v1.0"

# which accompanies this distribution, and is available

# at the URL "http://www.eclipse.org/legal/epl-v10.html".

#

# Initial Contributors:

# Nokia Corporation - initial contribution.

#

# Contributors:

#

# Description:

#

# Bluetooth HCI Commands to be generated

# Syntax is documented below. ("[]" brackets are used for grouping with regexp wildcards, and wildcard operators will only directly follow a ']')

#

# COMMAND_NAME(COMMAND_CREDITS,EXPECTS_COMMAND_STATUS,EXPECTS_COMMAND_COMPLETE[,Match,MATCHING_EVENT_NAME,CONCLUDES_COMMAND,CONTINUE_MATCHING[,MATCH_OPERANDS]*]*): COMMAND_PARAMETERS

#

# Variables:

# COMMAND_NAME = The name of the command for which a class will be generated.

# COMMAND_CREDITS = The number of "command credits" this command consumes when sent to a controller.

# EXPECTS_COMMAND_STATUS = Boolean specifying whether the command expects a command status event from the controller in response.

# EXPECTS_COMMAND_COMPLETE = Boolean specifying whether the command expects a command complete event from the controller.

# MATCHING_EVENT_NAME = The name of an event that will be "matched" with this command

# CONCLUDES_COMMAND = Boolean specifying whether the matched event represents the conclusion of the request made by the command.

# CONTINUE_MATCHING = Boolean specifying whether the command queue should continue trying to match the event with other sent commands.

# MATCH_OPERANDS = Used to perform the match on more than just the event opcode.

#

# COMMAND_PARAMETERS = [COMMAND_PARAMETER]? [,COMMAND_BLOCK_PARAM]*

# COMMAND_PARAMETER = PARAMETER_NAME (PARAMETER_SIZE)

# COMMAND_BLOCK_PARAM = COMMAND_PARAMETER [* PARAMETER_NAME]

# The parameters to the command are typically just a name and a size.  If the parameters feature an array (e.g. WriteStoredLinkKey)

# then the '*' can be used to make the construct with the appropriate multiplicity.

#

#

##### 7.1 Link Control Commands

#

Inquiry(1,True,False,Match,InquiryResultEvent,False,False,Match,InquiryResultwithRSSIEvent,False,False,Match,ExtendedInquiryResultEvent,False,False,Match,InquiryCompleteEvent,True,False,Match,CommandCompleteEvent,True,True,CommandOpcode_KInquiryCancelOpcode): LAP (3) InquiryLength(1) NumResponses(1)

InquiryCancel(1,False,True,Match,CommandCompleteEvent,True,True,CommandOpcode_KInquiryCancelOpcode):

PeriodicInquiryMode(1,False,True): MaxPeriodLength (2), MinPeriodLength (2), LAP (3), InquiryLength (1), NumResponses (1)

ExitPeriodicInquiryMode(1,False,True):

CreateACLConnection(1,True,False,Match,ConnectionCompleteEvent,True,False,BDADDR): BDADDR (6), PacketType (2), PageScanRepetitionMode (1), Reserved (1), ClockOffset (2), AllowRoleSwitch (1)

Disconnect(1,True,False,Match,DisconnectionCompleteEvent,True,False): ConnectionHandle (2), Reason (1)

CreateConnectionCancel(1,False,True): BDADDR (6)

AcceptConnectionRequest(1,True,False,Match,ConnectionCompleteEvent,True,False,BDADDR): BDADDR (6), Role (1)

RejectConnectionRequest(1,True,False,Match,ConnectionCompleteEvent,True,False,BDADDR): BDADDR (6), Reason (1)

LinkKeyRequestReply(1,False,True): BDADDR (6), LinkKey (16)

LinkKeyRequestReplyNegative(1,False,True): BDADDR (6)

PINCodeRequestReply(1,False,True): BDADDR (6), PINCodeLength (1), PINCode (16)

PINCodeRequestReplyNegative(1,False,True): BDADDR (6)

ChangeConnectionPacketType(1,True,False,Match,ConnectionPacketTypeChangedEvent,True,False): ConnectionHandle (2), PacketType (2)

AuthenticationRequested(1,True,False,Match,AuthenticationCompleteEvent,True,False): ConnectionHandle (2)

SetConnectionEncryption(1,True,False,Match,EncryptionChangeEvent,True,False): ConnectionHandle (2), EncryptionEnable (1)

ChangeLinkKey(1,True,False,Match,LinkKeyNotificationEvent,False,False,Match,ChangeLinkKeyEvent,True,False): ConnectionHandle (2)

MasterLinkKey(1,True,False,Match,MasterLinkKeyEvent,True,False): KeyFlag (1)

RemoteNameRequest(1,True,False,Match,RemoteNameReqCompleteEvent,True,False,Match,RemoteHostSupportedFeaturesNotificationEvent,False,False): BDADDR (6), PageScanRepetitionMode (1), Reserved (1), ClockOffset (2)

RemoteNameRequestCancel(1,False,True): BDADDR (6)

ReadRemoteSupportedFeatures(1,True,False,Match,ReadRemSuppFeatCompleteEvent,True,False): ConnectionHandle (2)

ReadRemoteExtendedFeatures(1,True,False,Match,ReadRemoteExtendedFeaturesCompleteEvent,True,False): ConnectionHandle (2), PageNumber (1)

ReadRemoteVersionInfo(1,True,False,Match,ReadRemVerInfoCompleteEvent,True,False): ConnectionHandle (2)

ReadClockOffset(1,True,False,Match,ReadClockOffsetEvent,True,False): ConnectionHandle (2)

ReadLMPHandle(1,False,True): ConnectionHandle (2)

SetupSynchronousConnection(1,True,False,Match,SynchronousConnectionCompleteEvent,True,False,BDADDR,Match,SynchronousConnectionChangedEvent,True,False): ConnectionHandle (2), TransmitBandwidth (4), ReceiveBandwidth (4), MaxLatency (2), VoiceSetting (2), RetransmissionEffort (1), PacketType (2), @BDADDR (6)

AcceptSynchronousConnectionRequest(1,True,False,Match,SynchronousConnectionCompleteEvent,True,False,BDADDR): BDADDR (6), TransmitBandwidth (4), ReceiveBandwidth (4), MaxLatency (2),  ContentFormat (2), RetransmissionEffort (1), PacketType (2)

RejectSynchronousConnectionRequest(1,True,False,Match,SynchronousConnectionCompleteEvent,True,False,BDADDR): BDADDR (6), Reason (1)

IOCapabilityRequestReply(1,False,True,Match,IOCapabilityResponseEvent,False,False,Match,RemoteOOBDataRequestEvent,False,False): BDADDR (6), IOCapability (1), OOBDataPresent (1), AuthenticationRequirements (1)

UserConfirmationRequestReply(1,False,True): BDADDR (6)

UserConfirmationRequestNegativeReply(1,False,True): BDADDR (6)

UserPasskeyRequestReply(1,False,True): BDADDR (6), NumericValue (4)

UserPasskeyRequestNegativeReply(1,False,True): BDADDR (6)

RemoteOOBDataRequestReply(1,False,True): BDADDR (6), OOBDataC (16), OOBDataR (16)

RemoteOOBDataRequestNegativeReply(1,False,True): BDADDR (6)

IOCapabilityRequestNegativeReply(1,False,True): BDADDR (6), Reason (1)

#

##### 7.2 Link Policy Commands

#

HoldMode(1,True,False,Match,ModeChangeEvent,True,False,ConnectionHandle): ConnectionHandle (2), HoldModeMaxInterval (2), HoldModeMinInterval (2)

SniffMode(1,True,False,Match,ModeChangeEvent,True,False,ConnectionHandle): ConnectionHandle (2), SniffMaxInterval (2), SniffMinInterval (2), SniffAttempt (2), SniffTimeout (2)

ExitSniffMode(1,True,False,Match,ModeChangeEvent,True,False,ConnectionHandle): ConnectionHandle (2)

ParkMode(1,True,False,Match,ModeChangeEvent,True,False,ConnectionHandle): ConnectionHandle (2), BeaconMaxInterval (2), BeaconMinInterval (2)

ExitParkMode(1,True,False,Match,ModeChangeEvent,True,False,ConnectionHandle): ConnectionHandle (2)

QOSSetup(1,True,False,Match,QOSSetupCompleteEvent,True,False): ConnectionHandle (2), Flags (1), ServiceType (1), TokenRate (4), PeakBandwidth (4), Latency (4), DelayVariation (4)

RoleDiscovery(1,False,True): ConnectionHandle (2)

SwitchRole(1,True,False,Match,RoleChangeEvent,True,False): BDADDR (6), Role (1)

ReadLinkPolicySettings(1,False,True): ConnectionHandle (2)

WriteLinkPolicySettings(1,False,True): ConnectionHandle (2), LinkPolicySettings (2)

ReadDefaultLinkPolicySettings(1,False,True):

WriteDefaultLinkPolicySettings(1,False,True): DefaultLinkPolicySettings (2)

FlowSpecification(1,True,False,Match,FlowSpecificationCompleteEvent,True,False): ConnectionHandle (2), Flags (1), FlowDirection (1), ServiceType (1), TokenRate (4), TokenBucketSize (4), PeakBandwidth (4), AccessLatency (4)

### SniffSubrating command would match with a sniff subrating event, however if not in sniff mode then the

### sniff subrating event will not be generated until sniff mode is entered, so we cannot match as we need to

### conclude the sniff subrating command upon the receipt of the command complete event. As it appears that 

### we would expect the sniff subrating event after the complete matching to the sniff subrating event 

### is pointless. 

SniffSubrating(1,False,True): ConnectionHandle (2), MaximumLatency (2), MinimumRemoteTimeout (2), MinimumLocalTimeout (2)

#

##### 7.3 Controller & Baseband Commands

#

SetEventMask(1,False,True): EventMask (8)

Reset(1,False,True):

SetEventFilter(1,False,True): FilterType (1), FilterConditionType (1), Condition (7)

Flush(1,False,True,Match,FlushOccurredEvent,False,False): ConnectionHandle (2)

ReadPINType(1,False,True):

WritePINType(1,False,True): PINType (1)

CreateNewUnitKey(1,False,True):

ReadStoredLinkKey(1,False,True,Match,ReturnLinkKeysEvent,False,False): BDADDR (6), ReadAllFlag (1)

WriteStoredLinkKey(1,False,True): NumKeysToWrite (1), BDADDR (6) * NumKeysToWrite, LinkKey (16) * NumKeysToWrite

DeleteStoredLinkKey(1,False,True): BDADDR (6), DeleteAllFlag (1)

WriteLocalName(1,False,True): LocalName (248)

ReadLocalName(1,False,True):

ReadConnectionAcceptTimeout(1,False,True):

WriteConnectionAcceptTimeout(1,False,True): ConnAcceptTimeout (2)

ReadPageTimeout(1,False,True):

WritePageTimeout(1,False,True): PageTimeout (2)

ReadScanEnable(1,False,True):

WriteScanEnable(1,False,True): ScanEnable (1)

ReadPageScanActivity(1,False,True):

WritePageScanActivity(1,False,True): PageScanInterval (2), PageScanWindow (2)

ReadInquiryScanActivity(1,False,True):

WriteInquiryScanActivity(1,False,True): InquiryScanInterval (2), InquiryScanWindow (2)

ReadAuthenticationEnable(1,False,True):

WriteAuthenticationEnable(1,False,True): AuthenticationEnable (1)

ReadClassOfDevice(1,False,True):

WriteClassOfDevice(1,False,True): ClassOfDevice (3)

ReadVoiceSetting(1,False,True):

WriteVoiceSetting(1,False,True): VoiceSetting (2)

ReadAutomaticFlushTimeout(1,False,True): ConnectionHandle (2)

WriteAutomaticFlushTimeout(1,False,True): ConnectionHandle (2), FlushTimeout (2)

ReadNumBroadcastRetransmissions(1,False,True):

WriteNumBroadcastRetransmissions(1,False,True): NumBroadcastRetransmissions (1)

ReadHoldModeActivity(1,False,True):

WriteHoldModeActivity(1,False,True): HoldModeActivity (1)

ReadTransmitPowerLevel(1,False,True): ConnectionHandle (2), Type (1)

ReadSynchronousFlowControlEnable(1,False,True):

WriteSynchronousFlowControlEnable(1,False,True): SynchronousFlowControlEnable (1)

SetControllerToHostFlowControl(1,False,True): FlowControlEnable (1)

HostBufferSize(1,False,True): HostACLDataPacketLength (2), HostSynchronousDataPacketLength (1), HostTotalNumACLDataPackets (2), HostTotalNumSynchronousDataPackets (2)

HostNumberOfCompletedPackets(0,False,False): NumberOfHandles (1), ConnectionHandle (2) * NumberOfHandles, HostNumOfCompletedPackets (2) * NumberOfHandles

ReadLinkSupervisionTimeout(1,False,True): ConnectionHandle (2)

WriteLinkSupervisionTimeout(1,False,True): ConnectionHandle (2), LinkSupervisionTimeout (2)

ReadNumberOfSupportedIAC(1,False,True):

ReadCurrentIACLAP(1,False,True):

WriteCurrentIACLAP(1,False,True): NumCurrentIAC (1), IACLAP (3) * NumCurrentIAC

SetAFHHostChannelClassification(1,False,True): AFHHostChannelClassification (10)

ReadInquiryScanType(1,False,True):

WriteInquiryScanType(1,False,True): ScanType (1)

ReadInquiryMode(1,False,True):

WriteInquiryMode(1,False,True): InquiryMode (1)

ReadPageScanType(1,False,True):

WritePageScanType(1,False,True): PageScanType (1)

ReadAFHChannelAssessmentMode(1,False,True):

WriteAFHChannelAssessmentMode(1,False,True): AFHChannelAssessmentMode (1)

ReadExtendedInquiryResponse(1,False,True):

WriteExtendedInquiryResponse(1,False,True): FECRequired (1), ExtendedInquiryResponse (240) 

RefreshEncryptionKey(1,True,False,Match,EncryptionKeyRefreshCompleteEvent,True,False,ConnectionHandle): ConnectionHandle (2)

ReadSimplePairingMode(1,False,True):

WriteSimplePairingMode(1,False,True): SimplePairingMode (1)

ReadLocalOOBData(1,False,True):

ReadInquiryResponseTransmitPowerLevel(1,False,True):

WriteInquiryResponseTransmitPowerLevel(1,False,True): TxPowerLevel (1)

SendKeypressNotification(1,False,True): BDADDR (6), NotificationType (1)

ReadDefaultErroneousDataReporting(1,False,True):

WriteDefaultErroneousDataReporting(1,False,True): ErroneousDataReporting (1)

EnhancedFlush(1,True,False,Match,EnhancedFlushCompleteEvent,True,False,ConnectionHandle): ConnectionHandle (2), PacketType (1)

#

##### 7.4 Informational Parameters

#

ReadLocalVersionInfo(1,False,True):

ReadLocalSupportedCommands(1,False,True):

ReadLocalSupportedFeatures(1,False,True):

ReadLocalExtendedFeatures(1,False,True): PageNumber (1)

ReadBufferSize(1,False,True):

ReadBdaddr(1,False,True):

#

##### 7.5 Status Parameters

#

ReadFailedContactCounter(1,False,True): ConnectionHandle (2)

ResetFailedContactCounter(1,False,True): ConnectionHandle (2)

ReadLinkQuality(1,False,True): ConnectionHandle (2)

ReadRSSI(1,False,True): ConnectionHandle (2)

ReadAFHChannelMap(1,False,True): ConnectionHandle (2)

ReadClock(1,False,True): ConnectionHandle (2), WhichClock (1)

#

##### 7.6 Testing Commands

#

ReadLoopbackMode(1,False,True):

WriteLoopbackMode(1,False,True): LoopbackMode (1)

EnableDeviceUnderTestMode(1,False,True):

WriteSimplePairingDebugMode(1,False,True): SimplePairingDebugMode (1)

#

#### Appendix A: Deprecated Commands, Events and Configuration Parameters

#

ReadPageScanPeriod(1,False,True):

WritePageScanPeriod(1,False,True): PageScanPeriodMode (1)

AddSCOConnection(1,True,False,Match,ConnectionCompleteEvent,True,False,BDADDR): ConnectionHandle (2), PacketType (2), @BDADDR (6)

ReadEncryptionMode(1,False,True):

WriteEncryptionMode(1,False,True): EncryptionMode (1)