//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the RBTPhysicalLinkAdapter classe

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Zoe Chen

//! @SYMCreationDate			03/04/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	T_BTUserAPI

DELAY		500

// ****************************************************************************

// RBTPhysicalLinkAdapter

// **************************************************************************** 

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0001

//! @SYMAPI							RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc				Create a RBTPhysicalLinkAdapter object

//!									Uses API elements: 	RBTPhysicalLinkAdapter()

//! @SYMTestActions					Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			RBTPhysicalLinkAdapter object was created successfully

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0002

//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Open a physical link adapter on an existing physical link

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									5. Open a physical link adapter on an existing physical link with a device address(11111111)

//!									   using Open()2 function. Return KErrNone if successful

//!									6. Close the physical link adapter using Close() function

//!									7. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command6CreateConnection

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command9Open

			COMMAND		RBTPhysicalLinkAdapter1	Close	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0003

//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Check whether the physical link adapter is open

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														RBTPhysicalLinkAdapter(), Open()2 and IsOpen() from RBTPhysicalLinkAdapter

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									5. Check whether the physical link adapter is open using IsOpen() function. 

//!									6. Verify that the result (False) is as expected (False)

//!									7. Open a physical link adapter on an existing physical link with a device address(11111111)

//!									   using Open()2 function. Return KErrNone if successful

//!									8. Check whether the physical link adapter is open using IsOpen() function.

//!									9. Verify that the result (True) is as expected (True)

//!									10. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if the physical link adapter is open, otherwise false

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command6CreateConnection

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND		RBTPhysicalLinkAdapter1	IsOpen		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command9IsOpen

			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command10Open

			COMMAND		RBTPhysicalLinkAdapter1	IsOpen		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command11IsOpen

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0004

//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Update the set of baseband packet types that are allowed locally

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														RBTPhysicalLinkAdapter(), Open()2, RequestChangeSupportedPacketTypes() and Close() from RBTPhysicalLinkAdapter

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									5. Open a physical link adapter on an existing physical link with a device address(11111111)

//!									   using Open()2 function. Return KErrNone if successful

//!									6. Update the set of baseband packet types that are allowed locally using 

//!									   RequestChangeSupportedPacketTypes() function. Return KErrNone if successful

//!									7. Close the physical link adapter using Close() function

//!									8. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command6CreateConnection

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command9Open

			COMMAND		RBTPhysicalLinkAdapter1	RequestChangeSupportedPacketTypes		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command10RequestChangeSupportedPacketTypes

			COMMAND		RBTPhysicalLinkAdapter1	Close	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004

// ****************************************************************************

// Negative test cases

// ****************************************************************************

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0005

//! @SYMAPI							RBTPhysicalLinkAdapter and RSocketServ

//! @SYMTestCaseDesc				Open a physical link adapter on a socket which is not open and connected

//!									Uses API elements: 	RBTPhysicalLinkAdapter(), Open()1 and Close() from RBTPhysicalLinkAdapter

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									3. Open a physical link adapter on an existing physical with a RSocket object link

//!									   using Open()1 function. Return KErrNone if successful

//!									4. Close the physical link adapter using Close() function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNotReady(-18) returned at step 2

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			CREATE_OBJECT	RSocket	RSocket1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND	!Error=-18	RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0005-0001command6Open

			COMMAND		RBTPhysicalLinkAdapter1	Close	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0007

//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Block a role switch

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														RBTPhysicalLinkAdapter(), Open()2, AllowRoleSwitch(), PreventRoleSwitch() and Close() from RBTPhysicalLinkAdapter

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(22222222) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									5. Open a physical link adapter on an existing physical link with a device address(22222222)

//!									   using Open()2 function. Return KErrNone if successful

//!									6. Ensure this object does not block a role switch using AllowRoleSwitch() function.

//!									   Return KErrNone if successful

//!									7. Block a role switch using PreventRoleSwitch() function. Return KErrNone if successful

//!									8. Close the physical link adapter using Close() function

//!									9. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrDisconnected(-36) returned at step 6 and 7

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command6CreateConnection

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command9Open

			COMMAND	!Error=-36	RBTPhysicalLinkAdapter1	AllowRoleSwitch	

			COMMAND	!Error=-36	RBTPhysicalLinkAdapter1	PreventRoleSwitch	

			COMMAND		RBTPhysicalLinkAdapter1	Close	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0008

//! @SYMAPI							RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc				Check whether the physical link adapter is open

//!									Uses API elements: RBTPhysicalLinkAdapter() and IsOpen()

//! @SYMTestActions					1. Create an empty RBTPhysicalLinkAdapter object

//!									2. Verify that if the physical link adapter is open

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Returned False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND		RBTPhysicalLinkAdapter1	IsOpen		BT-USER-BTPhysicalLinkAdapter-PublicApi-0008-0001command2IsOpen

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008

START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0009

//! @SYMAPI							RBTPhysicalLinkAdapter and RSocketServ

//! @SYMTestCaseDesc				Open a physical link adapter on a socket which is not open and connected

//!									Uses API elements: 	RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									3. Open a physical link adapter without an existing physical links using Open()2 function.

//!									   Return KErrNone if successful

//!									4. Close the physical link adapter using Close() function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0009-0001command6Open

			COMMAND		RBTPhysicalLinkAdapter1	Close	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009

//!START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006

//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0006

//! @SYMAPI							RBTPhysicalLinkAdapter and RSocketServ

//! @SYMTestCaseDesc				Open a physical link adapter on a socket which is not open and connected

//!									Uses API elements: 	RBTPhysicalLinkAdapter() and Open()2

//! @SYMTestActions					1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!									2. Open a physical link adapter without an existing physical links

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 2

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini

//!			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	

//!			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0006-0001command2Open

//!	END_TEST_BLOCK	!PanicCode=3	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006

DELAY		2000