//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the CBluetoothPhysicalLinks classe

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Zoe Chen

//! @SYMCreationDate			06/03/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	T_BTUserAPI

DELAY		500

// ****************************************************************************

// CBluetoothPhysicalLinks

// **************************************************************************** 

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0001

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0001

//! @SYMAPI							CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Open a Bluetooth socket

//!									Uses API elements:  NewL() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Bluetooth socket was opened successfully

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0001-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0001

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0002

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0002

//! @SYMAPI							CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Open a Bluetooth socket

//!									Uses API elements:  NewLC() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewLC() function. Return KErrNone if successful

//!									3. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Bluetooth socket was opened successfully

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewLC		BT-USER-BluetoothPhysicalLinks-PublicApi-0002-0001command5NewLC

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0002

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0003

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0003

//! @SYMAPI							CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Return a null aObject if the extension is not implemented, or a pointer to another interface if it is

//!									Uses API elements:  NewL(), MBPLN_ExtensionInterfaceL() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Verify the pointer returned is null using MBPLN_ExtensionInterfaceL() function. 

//!									   Return KErrNone if successful

//!									4. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			A NULL pointer returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0003-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	MBPLN_ExtensionInterfaceL		BT-USER-BluetoothPhysicalLinks-PublicApi-0003-0001command6MBPLN_ExtensionInterfaceL

			COMMAND		CBluetoothPhysicalLinks1	~

			COMMAND		RSocketServ1	Close

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0003

// ****************************************************************************

// Negative test cases

// ****************************************************************************

//!START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0004

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0004

//! @SYMAPI							CBluetoothPhysicalLinks

//! @SYMTestCaseDesc				Open a Bluetooth socket without connecting to the socket server first

//!									Uses API elements: NewL()

//! @SYMTestActions					1. Open a Bluetooth socket using NewL() function.

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 1

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

//!			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0004-0001command1NewL

//!	END_TEST_BLOCK	!PanicCode=3	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0004

//!START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0005

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0005

//! @SYMAPI							CBluetoothPhysicalLinks

//! @SYMTestCaseDesc				Open a Bluetooth socket without connecting to the socket server first

//!									Uses API elements: NewLC()

//! @SYMTestActions					1. Open a Bluetooth socket using NewLC() function.

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 1

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

//!			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			COMMAND		CBluetoothPhysicalLinks1	NewLC		BT-USER-BluetoothPhysicalLinks-PublicApi-0005-0001command1NewLC

//!	END_TEST_BLOCK	!PanicCode=3	!PanicString=KERN-EXEC	

//!END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0005

//!START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0006

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0006

//! @SYMAPI							CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Bring in a new member to the piconet after closing the socket server

//!									Uses API elements: 	NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Close the session on the socket server

//!									4. Bring in a new member to the piconet with a device address(33333333) using 

//!									   CreateConnection() function. 

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 4

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

//!			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			COMMAND		RSocketServ1	RSocketServ	

//!			COMMAND		RSocketServ1	Connect	

//!			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0006-0001command5NewL

//!			COMMAND		RSocketServ1	Close	

//!			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothPhysicalLinks-PublicApi-0006-0001command9CreateConnection

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC	

//!END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0006

//!START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0007

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0007

//! @SYMAPI							CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Cancel bringing in a new member to the piconet after closing the socket server

//!									Uses API elements:  NewL() and CancelCreateConnection() from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Close the session on the socket server

//!									4. Cancel bringing in a new member to the piconet using CancelCreateConnection() function.

//!									   

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 4

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

//!			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			COMMAND		RSocketServ1	RSocketServ	

//!			COMMAND		RSocketServ1	Connect	

//!			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0007-0001command5NewL

//!			COMMAND		RSocketServ1	Close

//!			COMMAND		CBluetoothPhysicalLinks1	CancelCreateConnection

//!	END_TEST_BLOCK	!PanicCode=0	!PanicString=KERN-EXEC	

//!END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0007

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0008

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0008

//! @SYMAPI							CBluetoothPhysicalLinks and RSocketServ

//! @SYMTestCaseDesc				Enumerate connected members of the piconet

//!									Uses API elements: 	NewL(), Enumerate() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!									   Return KErrNone if successful

//!									4. Verify that if return RBTDevAddrArray size is 0 as expected 0

//!									5. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Zero member returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0008-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	Enumerate		BT-USER-BluetoothPhysicalLinks-PublicApi-0008-0001command6Enumerate

			COMMAND		CBluetoothPhysicalLinks1	~

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0008

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0009

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0009

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier and RSocketServ

//! @SYMTestCaseDesc				Bring in a new member to the piconet

//!									Uses API elements:  NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(12121212) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return Callback HandleCreateConnectionCompleteL() function 

//!									5. Verify that if return result (Error -6004) from callback function is as expected. (Error -6004)

//!									6. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			EPageTimedOut (-6004) returned as expected at step 4

//! @SYMTestType					CIT

	START_TEST_BLOCK	2000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0009-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothPhysicalLinks-PublicApi-0009-0001command6CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0009

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0010

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0010

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier and RSocketServ

//! @SYMTestCaseDesc				Disconnect a single member of piconet

//!									Uses API elements:  NewL(), CreateConnection(), Disconnect() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//!														HandleCreateConnectionCompleteL() and HandleDisconnectCompleteL() from MBluetoothPhysicalLinksNotifier

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(12121212) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return Callback HandleCreateConnectionCompleteL() function 

//!									5. Verify that if return result (Error -6004) from callback function is as expected. (Error -6004)

//!									6. Disconnect a single member of piconet using Disconnect() function. 

//!									7. Return callback HandleDisconnectCompleteL() function

//!									8. Verify that if return result (decimal 0) is as expected (decimal 0)

//!									9. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			A single member got disconnected

//! @SYMTestType					CIT

	START_TEST_BLOCK	2000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0010-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothPhysicalLinks-PublicApi-0010-0001command6CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinks1	Disconnect		BT-USER-BluetoothPhysicalLinks-PublicApi-0010-0001command8Disconnect

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0010

START_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0011

//! @SYMTestCaseID					BT-USER-BluetoothPhysicalLinks-PublicApi-0011

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier and RSocketServ

//! @SYMTestCaseDesc				Disconnect all members of piconet

//!									Uses API elements:  NewL(), CreateConnection(), DisconnectAll() and destructor from CBluetoothPhysicalLinks

//!														RSocketServ(), Connect() and Close() from RSocketServ

//!														HandleCreateConnectionCompleteL() and HandleDisconnectAllCompleteL() from MBluetoothPhysicalLinksNotifier

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!									3. Bring in a new member to the piconet with a device address(12121212) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (Error -6004) from callback function is as expected. (Error -6004)

//!									6. Disconnect all members of piconet using DisconnectAll() function. Return KErrNone

//!									   if successful

//!									7. Return callback HandleDisconnectAllCompleteL() function

//!									8. Verify that if return result (decimal 0) is as expected (decimal 0)

//!									9. Delete the Bluetooth socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			All members got disconnected

//! @SYMTestType					CIT

	START_TEST_BLOCK	2000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothPhysicalLinks-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothPhysicalLinks-PublicApi-0011-0001command5NewL

			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothPhysicalLinks-PublicApi-0011-0001command6CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinks1	DisconnectAll		BT-USER-BluetoothPhysicalLinks-PublicApi-0011-0001command8DisconnectAll

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothPhysicalLinks-PublicApi-0011

DELAY		2000