//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the CBluetoothSynchronousLink classe

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Paihung Huang

//! @SYMCreationDate			14/03/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	T_BTUserAPI

DELAY		500

// ****************************************************************************

// CBluetoothSynchronousLink

// **************************************************************************** 

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0001

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0001

//! @SYMAPI							CBluetoothSynchronousLink and RSocketServ

//! @SYMTestCaseDesc				Allocate and open a socket sub-session for Bluetooth SCO

//!									Uses API elements: 	NewL() and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a socket for Bluetooth SCO using NewL() function. Return KErrNone if successful

//!									3. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Socket for Bluetooth SCO was opened successfully

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0001-0001command5NewL

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0001

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0002

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0002

//! @SYMAPI							CBluetoothSynchronousLink and RSocketServ

//! @SYMTestCaseDesc				Allocate and open a socket sub-session for Bluetooth SCO

//!									Uses API elements: 	NewLC() and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a socket for Bluetooth SCO using NewLC() function. Return KErrNone if successful

//!									3. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Socket for Bluetooth SCO was opened successfully

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothSynchronousLink1	NewLC		BT-USER-BluetoothSynchronousLink-PublicApi-0002-0001command5NewLC

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0002

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0003

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0003

//! @SYMAPI							CBluetoothSynchronousLink, MBluetoothPhysicalLinksNotifier and RSocketServ

//! @SYMTestCaseDesc				Return a null aObject if the extension is not implemented, or a pointer to another interface if it is

//!									Uses API elements: 	NewL() and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//!														MBSLN_ExtensionInterfaceL() from MBluetoothPhysicalLinksNotifier

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a socket for Bluetooth SCO using NewL() function. Return KErrNone if successful

//!									3. Verify the pointer returned is null using MBSLN_ExtensionInterfaceL() function. 

//!									   Return KErrNone if successful

//!									4. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			A null pointer returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0003-0001command5NewL

			COMMAND		CBluetoothSynchronousLink1	MBSLN_ExtensionInterfaceL		BT-USER-BluetoothSynchronousLink-PublicApi-0003-0001command6MBSLN_ExtensionInterfaceL

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0003

// ****************************************************************************

// Negative test cases

// ****************************************************************************

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0004

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0004

//! @SYMAPI							CBluetoothSynchronousLink and RSocketServ

//! @SYMTestCaseDesc				Create a synchronous link without an existing physical link

//!									Uses API elements: 	NewL(), SetupConnection()1 and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a socket for Bluetooth SCO using NewL() function

//!									3. Create a synchronous link with a device address(22222222) using SetupConnection()1 function.

//!									   Return KErrNone if successful

//!									4. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrDisconnected (-36) returned at step 3

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0004-0001command5NewL

			COMMAND		!Error=-36	CBluetoothSynchronousLink1	SetupConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0004-0001command6SetupConnection

			OUTSTANDING	

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0004

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0005

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0005

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSynchronousLink and RSocketServ

//! @SYMTestCaseDesc				Create a synchronous link with a ACL packet types

//!									Uses API elements: 	NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!														NewL() and SetupConnection()2 from CBluetoothSynchronousLink

//!														RSocketServ() and Connect() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function

//!									3. Bring in a new member to the piconet with a device address(22222222) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (-6004) from callback function is as expected (-6004)

//!									6. Open a socket for Bluetooth SCO using NewL() function

//!									7. Create a synchronous link with a device address(22222222) and EPacketsDM1 using 

//!									   SetupConnection()2 function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 5

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0005-0001command5NewL

			COMMAND	!AsyncError=-6004	CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0005-0001command6CreateConnection

			OUTSTANDING

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0005-0001command8NewL

			COMMAND		CBluetoothSynchronousLink1	SetupConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0005-0001command9SetupConnection

			OUTSTANDING

	END_TEST_BLOCK	!PanicCode=6	!PanicString=BTSocket

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0005

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0006

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0006

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSynchronousLink and RSocketServ

//! @SYMTestCaseDesc				Cancel creating a synchronous link before setting up the connection

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!														NewL(), CancelSetup() and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function

//!									3. Bring in a new member to the piconet with a device address(22222222) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (-6004) from callback function is as expected (-6004)

//!									6. Open a socket for Bluetooth SCO using NewL() function

//!									7. Cancel creating a synchronous link using CancelSetup() function

//!									8. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Cancelled the synchronous link

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0006-0001command5NewL

			COMMAND		!AsyncError=-6004	CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0006-0001command6CreateConnection

			OUTSTANDING

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0006-0001command8NewL

			COMMAND		CBluetoothSynchronousLink1	CancelSetup	

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0006

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0007

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0007

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSynchronousLink and RSocketServ

//! @SYMTestCaseDesc				Disconnect a synchronous link before setting up the connection

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!														NewL(), Disconnect() and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (-6004) from callback function is as expected (-6004)

//!									6. Open a socket for Bluetooth SCO using NewL() function

//!									7. Disconnect a synchronous link using Disconnect() function. Return KErrNone if successful

//!									8. Delete the socket using destructor

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrDisconnected (-36) returned at step 5

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0007-0001command5NewL

			COMMAND	!AsyncError=-6004	CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0007-0001command6CreateConnection

			OUTSTANDING

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0007-0001command8NewL

			COMMAND		!Error=-36	CBluetoothSynchronousLink1	Disconnect	BT-USER-BluetoothSynchronousLink-PublicApi-0007-0001command9Disconnect

			OUTSTANDING	

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0007

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0008

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0008

//! @SYMAPI							CBluetoothSynchronousLink, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RSocketServ

//! @SYMTestCaseDesc				Prepare for a remote device to set up a synchronous link on the local device

//!									Uses API elements: 	NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!														NewL() and AcceptConnection()2 from CBluetoothSynchronousLink

//!														RSocketServ() and Connect() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (-6004) from callback function is as expected (-6004)

//!									6. Open a socket for Bluetooth SCO using NewL() function

//!									7. Prepare for a remote device to set up a synchronous link on the local device with

//!									   EPacketsHV3 using AcceptConnection()2 function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrDisconnected (-36) returned at step 4

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1

			CREATE_OBJECT	TBTSyncPackets	TBTSyncPackets1	     

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

            COMMAND		TBTSyncPackets1	TBTSyncPackets		    BT-USER-BluetoothSynchronousLink-PublicApi-0008-0001command3TBTSyncPackets       

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0008-0001command4NewL

			COMMAND	!AsyncError=-6004	CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0008-0001command5CreateConnection

			OUTSTANDING

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0008-0001command6NewL

			COMMAND		CBluetoothSynchronousLink1	AcceptConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0008-0001command7AcceptConnection

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0008

//!START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0009

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0009

//! @SYMAPI							CBluetoothSynchronousLink, TBTSyncPackets

//! @SYMTestCaseDesc				Create a synchronous link on an EXISTING physical link without a connected session on the socket server

//!									Uses API elements: 	NewL() and SetupConnection()3 from CBluetoothSynchronousLink

//!														TBTSyncPackets() from TBTSyncPackets

//! @SYMTestActions					1. Construct a synchronous packet type (ESyncPacketsHV1) using TBTSyncPackets() function

//!									2. Open a socket for Bluetooth SCO using NewL() function

//!									3. Create a synchronous link on an EXISTING physical link with a device address(11111111)

//!									   and a SCO packet type(ESyncPacketsHV1) using SetupConnection()3 function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 3

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

//!			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			CREATE_OBJECT	TBTSyncPackets	TBTSyncPackets1	

//!			COMMAND		TBTSyncPackets1	TBTSyncPackets		BT-USER-BluetoothSynchronousLink-PublicApi-0009-0001command2TBTSyncPackets

//!			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0009-0001command4NewL

//!			COMMAND		CBluetoothSynchronousLink1	SetupConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0009-0001command5SetupConnection

//!			OUTSTANDING

//!	END_TEST_BLOCK	!PanicCode=3	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0009

//!START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0010

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0010

//! @SYMAPI							CBluetoothSynchronousLink

//! @SYMTestCaseDesc				Create a synchronous link on an EXISTING physical link without a connected session on the socket server

//!									Uses API elements: 	NewLC() and SetupConnection()1

//! @SYMTestActions					1. Open a socket for Bluetooth SCO using NewLC() function

//!									2. Create a synchronous link on an EXISTING physical link with a device address(11111111)

//!									   using SetupConnection()1 function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 2

//! @SYMTestType					CIT

//!	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

//!			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

//!			CREATE_OBJECT	RSocketServ	RSocketServ1	

//!			COMMAND		CBluetoothSynchronousLink1	NewLC		BT-USER-BluetoothSynchronousLink-PublicApi-0010-0001command2NewLC

//!			COMMAND		CBluetoothSynchronousLink1	SetupConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0010-0001command3SetupConnection

//!			OUTSTANDING

//!	END_TEST_BLOCK	!PanicCode=3	!PanicString=KERN-EXEC

//!END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0010

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0011

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0011

//! @SYMAPI							CBluetoothSynchronousLink, RSocketServ, TBTSyncPackets

//! @SYMTestCaseDesc				Setup a synchronous link without creating a physical link

//!									Uses API elements: 	NewL(), SetupConnection()3 and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//!														TBTSyncPackets() and Connect() from TBTSyncPackets

//! @SYMTestActions					1. Construct a synchronous packet type (ESyncAnyESCOPacket) using TBTSyncPackets() function

//!									2. Create and start a session on the socket server

//!									3. Open a socket for Bluetooth SCO using NewL() function

//!									4. Create a synchronous link on an EXISTING physical link with a device address(11111111)

//!									   and a SCO packet type(ESyncAnyESCOPacket) using SetupConnection()3 function

//!									5. Delete the synchronous link using destructor

//!									6. Close the session on the socket server

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrDisconnected (-36) returned at step 4

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			CREATE_OBJECT	TBTSyncPackets	TBTSyncPackets1	

			COMMAND		TBTSyncPackets1	TBTSyncPackets		BT-USER-BluetoothSynchronousLink-PublicApi-0011-0001command2TBTSyncPackets

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0011-0001command7NewL

			COMMAND	!Error=-36	CBluetoothSynchronousLink1	SetupConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0011-0001command8SetupConnection

			OUTSTANDING

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0011

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0012

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0012

//! @SYMAPI							CBluetoothSynchronousLink, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RSocketServ

//! @SYMTestCaseDesc				Cancel ability to respond to a remote request without creating a synchronous link

//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!														NewL(), CancelAccept() and destructor from CBluetoothSynchronousLink

//!														RSocketServ(), Connect() and Close() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (-6004) from callback function is as expected (-6004)

//!									6. Open a socket for Bluetooth SCO using NewL() function

//!									7. Cancel ability to respond to a remote request to set up a synchronous link using

//!									   CancelAccept() function

//!									8. Delete the synchronous link using destructor

//!									9. Delete the socket using destructor

//!									10. Close the session on the socket server

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Cancel succeeded

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLink1	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	

			CREATE_OBJECT	RSocketServ	RSocketServ1	

			COMMAND		RSocketServ1	RSocketServ	

			COMMAND		RSocketServ1	Connect	

			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0012-0001command5NewL

			COMMAND	!AsyncError=-6004	CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0012-0001command6CreateConnection

			OUTSTANDING

			COMMAND		CBluetoothSynchronousLink1	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0012-0001command8NewL

			COMMAND		CBluetoothSynchronousLink1	CancelAccept	

			COMMAND		CBluetoothSynchronousLink1	~	

			COMMAND		CBluetoothPhysicalLinks1	~	

			COMMAND		RSocketServ1	Close	

	END_TEST_BLOCK

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0012

START_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0013

//! @SYMTestCaseID					BT-USER-BluetoothSynchronousLink-PublicApi-0013

//! @SYMAPI							CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSynchronousLink, RSocketServ

//! @SYMTestCaseDesc				Get the socket address of the remote Bluetooth device without creating a synchronous link

//!									Uses API elements: 	NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!														HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!														NewL() and RemoteName() from CBluetoothSynchronousLink

//!														RSocketServ() and Connect() from RSocketServ

//! @SYMTestActions					1. Create and start a session on the socket server

//!									2. Open a Bluetooth socket using NewL() function

//!									3. Bring in a new member to the piconet with a device address(11111111) using 

//!									   CreateConnection() function. Return KErrNone if successful

//!									4. Return callback HandleCreateConnectionCompleteL() function

//!									5. Verify that if return result (-6004) from callback function is as expected (-6004)

//!									6. Open a socket for Bluetooth SCO using NewL() function

//!									7. Get the socket address of the remote Bluetooth device using RemoteName() function

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Panic at step 5

//! @SYMTestType					CIT

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-BluetoothSynchronousLink-PublicApi.ini

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			CREATE_OBJECT	CBluetoothSynchronousLink	CBluetoothSynchronousLinkData	

			COMMAND		RSocketServData	RSocketServ	

			COMMAND		RSocketServData	Connect	

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0013-0001command5NewL

			COMMAND	!AsyncError=-6004	CBluetoothPhysicalLinksData	CreateConnection		BT-USER-BluetoothSynchronousLink-PublicApi-0013-0001command6CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothSynchronousLinkData	NewL		BT-USER-BluetoothSynchronousLink-PublicApi-0013-0001command9NewL

			COMMAND		CBluetoothSynchronousLinkData	RemoteName		BT-USER-BluetoothSynchronousLink-PublicApi-0013-0001command10RemoteName

	END_TEST_BLOCK	!PanicCode=6	!PanicString=BTSocket

END_TESTCASE BT-USER-BluetoothSynchronousLink-PublicApi-0013

DELAY		2000