//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the RBTPhysicalLinkAdapter class

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Ting Yen and PaiHung Huang

//! @SYMCreationDate			11/09/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	UCCControlTE

LOAD_SUITE	T_BTUserAPI	-SharedData

DELAY		2000

RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncService

RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartTDService

RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini BuildRunAdapterAutoPassiveSlave

DELAY		5000

// ****************************************************************************

// Set up BT Addresses

// ****************************************************************************

START_TESTCASE BT-USER-PublicApi-Master-SetBTAddresses

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect		

			COMMAND		CBluetoothSocket1	NewL		BT-USER-PublicApi-Active-SetBTAddresses-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct		

			STORE	CBluetoothSocket1	

			STORE	TBTServiceSecurity1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	DELAY		2000

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			CREATE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		TBTDevAddrRemote	Construct		

			COMMAND		TBTDevAddrRemote	OpenHostResolver		BT-USER-PublicApi-Active-SetBTAddresses-0002command3OpenHostResolver

			COMMAND		TBTDevAddrRemote	SetHostNameL		BT-USER-PublicApi-Active-SetBTAddresses-0002command4SetHostNameL

			COMMAND		TBTDevAddrRemote	GetDeviceAddress		BT-USER-PublicApi-Active-SetBTAddresses-0002command5GetDeviceAddress

			OUTSTANDING

			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		

			COMMAND		TL2CAPSockAddr1	SetSecurity		BT-USER-PublicApi-Active-SetBTAddresses-0002command8SetSecurity

			COMMAND		TL2CAPSockAddr1	SetBTAddr		BT-USER-PublicApi-Active-SetBTAddresses-0002command9SetBTAddr

			COMMAND		TL2CAPSockAddr1	BTAddr		BT-USER-PublicApi-Active-SetBTAddresses-0002command10BTAddr

			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PublicApi-Active-SetBTAddresses-0002command11SetPort

			STORE	CBluetoothSocket1	

			STORE	TBTDevAddrRemote	

			STORE	TL2CAPSockAddr1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	DELAY		5000

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			COMMAND		CBluetoothSocket1	Connect		BT-USER-PublicApi-Active-SetBTAddresses-0003command1Connect

			OUTSTANDING

			STORE	CBluetoothSocket1	

			STORE	TL2CAPSockAddr1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTDevAddr	TBTDevAddrLocal	

			COMMAND		TBTDevAddrLocal	Construct		

			COMMAND		TBTDevAddrLocal	SetBTAddr		BT-USER-PublicApi-Active-SetBTAddresses-0004command3SetBTAddr

			COMMAND		CBluetoothSocket1	Send		BT-USER-PublicApi-Active-SetBTAddresses-0004command5Send

			OUTSTANDING	

			STORE	CBluetoothSocket1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PublicApi-Master-SetBTAddresses

DELAY		2000

// ****************************************************************************

// RBluetoothPhysicalLinkAdapter Master

// **************************************************************************** 

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0001

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0001

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Check whether the physical link adapter is open

//!								Uses API elements: 	RSocketServ() and Connect() from RSocketServ

//!													NewL() and CreateConnection() from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!													RBTPhysicalLinkAdapter(), Open()2, IsOpen() and Close() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Create and start a session on the socket server

//!								2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!								3. Bring in a new member to the piconet with a device address using CreateConnection()

//!								   function. Return KErrNone if successful

//!								4. Return callback HandleCreateConnectionCompleteL() function

//!								5. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								6. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								7. Check whether the physical link adapter is open using IsOpen() function

//!								8. Verify that the result (False) is as expected (False)

//!								9. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								10. Check whether the physical link adapter is open using IsOpen() function

//!								11. Verify that the result (True) is as expected (True)

//!								12. Close the physical link adapter using Close() function

//!								13. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		False returned at step 8, True returned at step 11

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			COMMAND		RSocketServData	RSocketServ		

			COMMAND		RSocketServData	Connect		

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command5NewL

			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command6CreateConnection

			OUTSTANDING	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command10IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command11Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command12IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE	CBluetoothPhysicalLinksData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0001

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0002

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0002

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Sniff Mode

//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, IsOpen(), PhysicalLinkState(), ActivateSniffRequester() and Close()

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Get the state of the physical link using PhysicalLinkState() function

//!								6. Verify that the result (3178245) is as expected (3178245)

//!								7. Start a facility that will continually attempt to put the physical link into Sniff Mode

//!								   using ActivateSniffRequester() function. Return KErrNone if successful

//!								8. Get the state of the physical link using PhysicalLinkState() function

//!								9. Verify that the result (3178245) is as expected (3178245)

//!								10. Close the physical link adapter using Close() function

//!								11. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY		5000

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command5PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	ActivateSniffRequester		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command7PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0002

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0003

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0003

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Cancel a facility that is continually requesting a low power mode

//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, IsOpen(), PhysicalLinkState(), ActivateParkRequester(), CancelLowPowerModeRequester() and Close()

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Get the state of the physical link using PhysicalLinkState() function

//!								6. Verify that the result (3178245) is as expected (3178245)

//!								7. Start a facility that will continually attempt to put the physical link into Park Mode

//!								   using ActivateParkRequester() function. Return KErrNone if successful

//!								8. Get the state of the physical link using PhysicalLinkState() function

//!								9. Verify that the result (3178245) is as expected (3178245)

//!								10. Cancel a facility that is continually requesting a low power mode using CancelLowPowerModeRequester()

//!								    function. Return KErrNone if successful

//!								11. Close the physical link adapter using Close() function

//!								12. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY		5000

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command5PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	ActivateParkRequester		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command7PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	CancelLowPowerModeRequester		

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0003

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0004

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0004

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Attempt to be the Bluetooth Master of a Piconet

//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, RequestSlaveRole(), PhysicalLinkState() and Close()

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Attempt to be the Bluetooth Slave of a Piconet using RequestSlaveRole() function.

//!								   Return KErrNone if successful

//!								4. Get the state of the physical link using PhysicalLinkState() function

//!								5. Verify that the result (3178246) is as expected (3178246)

//!								6. Close the physical link adapter using Close() function

//!								7. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY		5000

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0004-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	RequestSlaveRole		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0004-0001command5PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0004

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0005

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0005

//! @SYMAPI						RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks, RSocketServ

//! @SYMTestCaseDesc			Attempt to be a Bluetooth Slave of a Piconet

//!								Uses API elements: 	RBTPhysicalLinkAdapter(), Open()2, RequestSlaveRole(), PhysicalLinkState(), Close() and destructor from RBTPhysicalLinkAdapter

//!													destructor from CBluetoothPhysicalLinks

//!													Close() from RSocketServ

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Attempt to be a Bluetooth Slave of a Piconet using RequestSlaveRole() function.

//!								   Return KErrNone if successful

//!								4. Get the state of the physical link using PhysicalLinkState() function

//!								5. Verify that the result (3178246) is as expected (3178246)

//!								6. Close the physical link adapter using Close() function

//!								7. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY 5000

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0005-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	RequestSlaveRole		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0005-0001command5PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0005

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0006

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0006

//! @SYMAPI						RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Park Mode

//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, IsOpen(), PhysicalLinkState(), NotifyNextBasebandChangeEvent(), CancelNextBasebandChangeEventNotifier(), ActivateParkRequester() and Close()

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Check whether the physical link adapter is open using IsOpen() function

//!								4. Verify that the result (True) is as expected (True)

//!								5. Get the state of the physical link using PhysicalLinkState() function

//!								6. Verify that the result (3178246) is as expected (3178246)

//!								7. Request a notification with ENotifyParkMode using NotifyNextBasebandChangeEvent() function

//!								8. Verify that the result (16) is as expected (16)

//!								9. Cancel a currently requested notification using CancelNextBasebandChangeEventNotifier() function

//!								10. Start a facility that will continually attempt to put the physical link into Park Mode 

//!								   using ActivateParkRequester() function. Return KErrNone if successful

//!								11. Get the state of the physical link using PhysicalLinkState() function

//!								12. Verify that the result (3178258) is as expected (3178258)

//!								13. Close the physical link adapter using Close() function

//!								14. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrCancel returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY		5000

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command4IsOpen

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command5PhysicalLinkState

			COMMAND	!AsyncError=-3		RBTPhysicalLinkAdapterData	NotifyNextBasebandChangeEvent		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command6NotifyNextBasebandChangeEvent

			COMMAND		RBTPhysicalLinkAdapterData	CancelNextBasebandChangeEventNotifier		

			OUTSTANDING	

			COMMAND		RBTPhysicalLinkAdapterData	ActivateParkRequester		

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command10PhysicalLinkState

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE	RBTPhysicalLinkAdapterData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY		5000	

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0006

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0007

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0007

//! @SYMAPI						RBTPhysicalLinkAdapter, CBluetoothSocket, MBluetoothSocketNotifier

//! @SYMTestCaseDesc			Update the set of baseband packet types that are allowed locally

//!								Uses API elements: 	RBTPhysicalLinkAdapter(), Open()2, RequestChangeSupportedPacketTypes(), NotifyNextBasebandChangeEvent(), PhysicalLinkState() and Close() from RBTPhysicalLinkAdapter

//!													Send()1 from CBluetoothSocket

//!													HandleSendCompleteL() from MBluetoothSocketNotifier

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Update the set of baseband packet types that are allowed locally with EPacketsDM1

//!								   using RequestChangeSupportedPacketTypes() function. Return KErrNone if successful

//!								4. Get the state of the physical link using PhysicalLinkState() function

//!								5. Verify that the result (3178246) is as expected (3178246)

//!								6. Request a notification with ENotifyPacketsDM1 using NotifyNextBasebandChangeEvent() function

//!								7. Verify that the result (16) is as expected (16)

//!								8. Send data to a remote bluetooth device using Send()1 function. Return KErrNone if successful

//!								9. HandleSendCompleteL() gets called verify that there is no error code

//!								10. Close the physical link adapter using Close() function

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command3Open

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command4PhysicalLinkState

			COMMAND		RBTPhysicalLinkAdapterData	NotifyNextBasebandChangeEvent		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command5NotifyNextBasebandChangeEvent

			COMMAND		RBTPhysicalLinkAdapterData	RequestChangeSupportedPacketTypes		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command6RequestChangeSupportedPacketTypes

			OUTSTANDING	

			COMMAND		CBluetoothSocket1	Send		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command9Send

			OUTSTANDING	

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			STORE	TBTDevAddrRemote	

			STORE	RSocketServData	

			STORE	CBluetoothSocket1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0007

// ****************************************************************************

// RBluetoothPhysicalLinkAdapter Negative Test Cases

// ****************************************************************************	

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0008

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0008

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Update an invalid baseband packet type (EPacketsHV1) locally

//!								Uses API elements: 	Close() from RSocketServ

//!													destructor from CBluetoothPhysicalLinks

//!													RBTPhysicalLinkAdapter(), Open()2, PhysicalLinkState(), RequestChangeSupportedPacketTypes() and Close() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function

//!								2. Open a physical link adapter on an existing physical link with a device address

//!								   using Open()2 function. Return KErrNone if successful

//!								3. Get the state of the physical link using PhysicalLinkState() function

//!								4. Verify that the result (3146502) is as expected (3146502)

//!								5. Update the set of baseband packet types that are allowed locally with EPacketsHV1 

//!								   using RequestChangeSupportedPacketTypes() function. Return KErrNone if successful

//!								6. Close the physical link adapter using Close() function

//!								7. Destroy the physical link adapter object

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		Error at step 6. KErrArgument(-6) returned

//! @SYMTestType				CIT

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			RESTORE_OBJECT	RSocketServ	RSocketServData	

			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		

			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001command7Open

			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001command8PhysicalLinkState

			COMMAND	!Error=-6		RBTPhysicalLinkAdapterData	RequestChangeSupportedPacketTypes		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001command9RequestChangeSupportedPacketTypes

			COMMAND		RBTPhysicalLinkAdapterData	Close		

			COMMAND		RBTPhysicalLinkAdapterData	~		

			STORE	TBTDevAddrRemote	

			STORE	TL2CAPSockAddr1	

			STORE	RSocketServData	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0008

START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0009

//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0009

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter

//! @SYMTestCaseDesc			Get the state of the physical link without opening a physical link adapter

//!								Uses API elements: 	PhysicalLinkState() and Open() from RBTPhysicalLinkAdapter

//! @SYMTestActions				1. Get the state of the physical link