//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the CBluetoothPhysicalLinks class

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Sherry Ho and Zoe Chen

//! @SYMCreationDate			16/08/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	UCCControlTE

LOAD_SUITE	T_BTUserAPI	-SharedData

DELAY		2000

RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncService

RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartTDService

RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini BuildRunPhysicalLinksPassiveSlave

DELAY		5000

// ****************************************************************************

// CBluetoothPhysicalLinks Master

// **************************************************************************** 

START_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0001

//! @SYMTestCaseID				BT-USER-PhysicalLinks-PublicApi-Active-Master-0001

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSocket, 

//!								MBluetoothSocketNotifier, TBTServiceSecurity, TL2CAPSockAddr, TBTDevAddr

//! @SYMTestCaseDesc			Bring a new member to a piconet with waiting for 10000000 micro secs

//!								Uses API elements: 	RSocketServ(), Connect() and Close() from RSocketServ

//!													NewL(), CreateConnection(), Enumerate() and destructor from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!													NewL()1, Connect()1, Shutdown()1 and destructor from CBluetoothSocket

//!													HandleConnectCompleteL() and HandleShutdownCompleteL() from MBluetoothSocketNotifier

//!													TBTServiceSecurity() from TBTServiceSecurity

//!													TL2CAPSockAddr(), SetSecurity(), SetBTAddr(), BTAddr() and SetPort() from TL2CAPSockAddr

//!													TBTDevAddr() from TBTDevAddr

//!													Open() and SetHostName() from RHostResolver

//! @SYMTestActions				1. Order slave to set up connection

//!								2. Get result from slave to wait for it to be ready

//!								3. Create a connection to the RSocket server

//!								4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)

//!								5. Create an empty TBTServiceSecurity object

//!								6. Create an empty TBTDevAddr object (slave)

//!								7. Create and initialise an RHostResolver

//!								8. Set Hostname (MasterDevice) of the device

//!								9. Get the slave device address

//!								10. Create a TL2CAPSockAddr object

//!								11. Set the Security of the TL2CAPSockAddr (Use default/empty as on server)

//!								12. Set the BT address of the TL2CAPSockAddr to the one of the Casira pod of the slave that we connect to

//!								13. Verify the set BT Address

//!								14. Set the port to the specific one of the protocol we use

//!								15. Create and start a session on the socket server

//!								16. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!								17. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								18. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								19. Bring in a new member to the piconet with the slave device address using 

//!								    CreateConnection() function. Return KErrNone if successful

//!								20. Return callback HandleCreateConnectionCompleteL() function

//!								21. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								22. Waiting for 10000000 micro secs

//!								23. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								24. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								25. Use the TL2CAPSockAddr in the connect of the CBluetooth object

//!								26. HandleConnectCompleteL gets called indicating that connecting the BT connection completed

//!								27. Get result from slave

//!								28. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								29. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								30. Do socket cleanup by calling Shutdown()1

//!								31. HandleShutdownCompleteL gets called verify error code

//!								32. delete CBluetoothSocket object

//!								33. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								34. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								35. Delete the Bluetooth socket using destructor

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned from HandleCreateConnectionCompleteL() callback

//! @SYMTestType				CIT

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		CBluetoothSocket1	RSocketServerConnect		

			COMMAND		CBluetoothSocket1	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0001-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct		

			STORE	CBluetoothSocket1	

			STORE	TBTServiceSecurity1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	DELAY 2000

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			CREATE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			COMMAND		TBTDevAddrRemote	Construct		

			COMMAND		TBTDevAddrRemote	OpenHostResolver		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command3OpenHostResolver

			COMMAND		TBTDevAddrRemote	SetHostNameL		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command4SetHostNameL

			COMMAND		TBTDevAddrRemote	GetDeviceAddress		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command5GetDeviceAddress

			OUTSTANDING

			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		

			COMMAND		TL2CAPSockAddr1	SetSecurity		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command8SetSecurity

			COMMAND		TL2CAPSockAddr1	SetBTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command9SetBTAddr

			COMMAND		TL2CAPSockAddr1	BTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command10BTAddr

			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PhysicalLinks-PublicApi-Active-0001-0002command11SetPort

			STORE	CBluetoothSocket1

			STORE	TL2CAPSockAddr1

			STORE	TBTDevAddrRemote	

			STORE_ACTIVE_SCHEDULER	

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY 5000

	START_TEST_BLOCK	2000	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1

			COMMAND		RSocketServData	RSocketServ		

			COMMAND		RSocketServData	Connect

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command5NewL

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command6Enumerate

			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command7CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command9Enumerate

			COMMAND		CBluetoothSocket1	Connect		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command11Connect

			OUTSTANDING				

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command13Enumerate

			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command15Shutdown

			OUTSTANDING	

			COMMAND		CBluetoothSocket1	~		

			COMMAND		CBluetoothSocket1	RSocketServerClose		

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0001-0003command20Enumerate

			COMMAND		CBluetoothPhysicalLinksData	~		

			COMMAND		RSocketServData	Close		

			STORE	TBTDevAddrRemote	

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0001

START_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0002

//! @SYMTestCaseID				BT-USER-PhysicalLinks-PublicApi-Active-Master-0002

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSocket, 

//!								MBluetoothSocketNotifier, TBTServiceSecurity

//! @SYMTestCaseDesc			Disconnect a single member of piconet

//!								Uses API elements: 	RSocketServ(), Connect() and Close() from RSocketServ

//!													NewL(), CreateConnection(), Enumerate(), Disconnect() and destructor from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() and HandleDisconnectCompleteL() from MBluetoothPhysicalLinksNotifier

//!													NewL()1, Connect()1, Shutdown()1 and destructor from CBluetoothSocket

//!													HandleConnectCompleteL() and HandleShutdownCompleteL() from MBluetoothSocketNotifier

//!													TBTServiceSecurity() from TBTServiceSecurity

//!													TL2CAPSockAddr(), SetSecurity(), SetBTAddr(), BTAddr() and SetPort() from TL2CAPSockAddr

//! @SYMTestActions				1. Order slave to set up connection

//!								2. Get result from slave to wait for it to be ready

//!								3. Create a connection to the RSocket server

//!								4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)

//!								5. Create an empty TBTServiceSecurity object

//!								6. Create a TL2CAPSockAddr object

//!								7. Set the Security of the TL2CAPSockAddr (Use default/empty as on server)

//!								8. Set the BT address of the TL2CAPSockAddr to the one of the Casira pod of the slave that we connect to

//!								9. Verify the set BT Address

//!								10. Set the port to the specific one of the protocol we use

//!								11. Create and start a session on the socket server

//!								12. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!								13. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								14. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								15. Bring in a new member to the piconet with the slave device address using 

//!								    CreateConnection() function. Return KErrNone if successful

//!								16. Return callback HandleCreateConnectionCompleteL() function

//!								17. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								18. Waiting for 10000000 micro secs

//!								19. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								20. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								21. Use the TL2CAPSockAddr in the connect of the CBluetooth object

//!								22. HandleConnectCompleteL gets called indicating that connecting the BT connection completed

//!								23. Get result from slave

//!								24. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								25. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								26. Do socket cleanup by calling Shutdown()1

//!								27. HandleShutdownCompleteL gets called verify error code

//!								28. delete CBluetoothSocket object

//!								29. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								30. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								31. Disconnect a single member of piconet with the slave device address using Disconnect() function. 

//!								    Return KErrNone if successful

//!								32. Return callback HandleDisconnectCompleteL() function

//!								33. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								34. Delete the Bluetooth socket using destructor

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone returned from HandleDisconnectCompleteL() callback

//! @SYMTestType				CIT

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			COMMAND		CBluetoothSocket1	RSocketServerConnect		

			COMMAND		CBluetoothSocket1	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0002-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct		

			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		

			COMMAND		TL2CAPSockAddr1	SetSecurity		BT-USER-PhysicalLinks-PublicApi-Active-0002-0001command7SetSecurity

			COMMAND		TL2CAPSockAddr1	SetBTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0002-0001command8SetBTAddr

			COMMAND		TL2CAPSockAddr1	BTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0002-0001command9BTAddr

			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PhysicalLinks-PublicApi-Active-0002-0001command10SetPort

			STORE	CBluetoothSocket1	

			STORE	TBTDevAddrRemote	

			STORE	TL2CAPSockAddr1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	DELAY 2000

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY 5000

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			COMMAND		RSocketServData	RSocketServ		

			COMMAND		RSocketServData	Connect		

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command5NewL

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command6Enumerate

			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command7CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command9Enumerate

			COMMAND		CBluetoothSocket1	Connect		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command11Connect

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command13Enumerate

			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command15Shutdown

			OUTSTANDING	

			COMMAND		CBluetoothSocket1	~		

			COMMAND		CBluetoothSocket1	RSocketServerClose		

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command20Enumerate

			COMMAND		CBluetoothPhysicalLinksData	Disconnect		BT-USER-PhysicalLinks-PublicApi-Active-0002-0002command21Disconnect

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	~		

			COMMAND		RSocketServData	Close		

			STORE	TBTDevAddrRemote	

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0002

START_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0003

//! @SYMTestCaseID				BT-USER-PhysicalLinks-PublicApi-Active-Master-0003

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSocket, 

//!								MBluetoothSocketNotifier, TBTServiceSecurity

//! @SYMTestCaseDesc			Disconnect all members of piconet

//!								Uses API elements: 	RSocketServ(), Connect() and Close() from RSocketServ

//!													NewL(), CreateConnection(), Enumerate(), DisconnectAll() and destructor from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() and HandleDisconnectAllCompleteL() from MBluetoothPhysicalLinksNotifier

//!													NewL()1, Connect()1, Shutdown()1 and destructor from CBluetoothSocket

//!													HandleConnectCompleteL() and HandleShutdownCompleteL() from MBluetoothSocketNotifier

//!													TBTServiceSecurity() from TBTServiceSecurity

//!													TL2CAPSockAddr(), SetSecurity(), SetBTAddr(), BTAddr() and SetPort() from TL2CAPSockAddr

//! @SYMTestActions				1. Order slave to set up connection

//!								2. Get result from slave to wait for it to be ready

//!								3. Create a connection to the RSocket server

//!								4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)

//!								5. Create an empty TBTServiceSecurity object

//!								6. Create a TL2CAPSockAddr object

//!								7. Set the Security of the TL2CAPSockAddr (Use default/empty as on server)

//!								8. Set the BT address of the TL2CAPSockAddr to the one of the Casira pod of the slave that we connect to

//!								9. Verify the set BT Address

//!								10. Set the port to the specific one of the protocol we use

//!								11. Create and start a session on the socket server

//!								12. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!								13. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								14. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								15. Bring in a new member to the piconet with the slave device address using 

//!								    CreateConnection() function. Return KErrNone if successful

//!								16. Return callback HandleCreateConnectionCompleteL() function

//!								17. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								18. Waiting for 10000000 micro secs

//!								19. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								20. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								21. Use the TL2CAPSockAddr in the connect of the CBluetooth object

//!								22. HandleConnectCompleteL gets called indicating that connecting the BT connection completed

//!								23. Get result from slave

//!								24. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								25. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								26. Do socket cleanup by calling Shutdown()1

//!								27. HandleShutdownCompleteL gets called verify error code

//!								28. delete CBluetoothSocket object

//!								29. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								30. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								31. Disconnect all members of piconet using DisconnectAll() function. Return KErrNone if successful

//!								32. Return callback HandleDisconnectAllCompleteL() function

//!								33. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								34. Delete the Bluetooth socket using destructor

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		KErrNone Returned from HandleDisconnectAllCompleteL() callback

//! @SYMTestType				CIT

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			COMMAND		CBluetoothSocket1	RSocketServerConnect		

			COMMAND		CBluetoothSocket1	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0003-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct		

			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		

			COMMAND		TL2CAPSockAddr1	SetSecurity		BT-USER-PhysicalLinks-PublicApi-Active-0003-0001command7SetSecurity

			COMMAND		TL2CAPSockAddr1	SetBTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0003-0001command8SetBTAddr

			COMMAND		TL2CAPSockAddr1	BTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0003-0001command9BTAddr

			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PhysicalLinks-PublicApi-Active-0003-0001command10SetPort

			STORE	CBluetoothSocket1	

			STORE	TBTDevAddrRemote	

			STORE	TL2CAPSockAddr1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	DELAY 5000

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY 5000

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			COMMAND		RSocketServData	RSocketServ		

			COMMAND		RSocketServData	Connect		

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command5NewL

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command6Enumerate

			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command7CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command9Enumerate

			COMMAND		CBluetoothSocket1	Connect		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command11Connect

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command13Enumerate

			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command15Shutdown

			OUTSTANDING	

			COMMAND		CBluetoothSocket1	~		

			COMMAND		CBluetoothSocket1	RSocketServerClose		

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command20Enumerate

			COMMAND		CBluetoothPhysicalLinksData	DisconnectAll		BT-USER-PhysicalLinks-PublicApi-Active-0003-0002command21DisconnectAll

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	~		

			COMMAND		RSocketServData	Close		

			STORE	TBTDevAddrRemote	

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0003

START_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0004

//! @SYMTestCaseID				BT-USER-PhysicalLinks-PublicApi-Active-Master-0004

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSocket, 

//!								MBluetoothSocketNotifier, TBTServiceSecurity

//! @SYMTestCaseDesc			Disconnect a single member (invalid bluetooth address) of piconet

//!								Uses API elements: 	RSocketServ(), Connect() and Close() from RSocketServ

//!													NewL(), CreateConnection(), Enumerate(), Disconnect() and destructor from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() and HandleDisconnectCompleteL() from MBluetoothPhysicalLinksNotifier

//!													NewL()1, Connect()1, Shutdown()1 and destructor from CBluetoothSocket

//!													HandleConnectCompleteL() and HandleShutdownCompleteL() from MBluetoothSocketNotifier

//!													TBTServiceSecurity() from TBTServiceSecurity

//!													TL2CAPSockAddr(), SetSecurity(), SetBTAddr(), BTAddr() and SetPort() from TL2CAPSockAddr

//! @SYMTestActions				1. Order slave to set up connection

//!								2. Get result from slave to wait for it to be ready

//!								3. Create a connection to the RSocket server

//!								4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)

//!								5. Create an empty TBTServiceSecurity object

//!								6. Create a TL2CAPSockAddr object

//!								7. Set the Security of the TL2CAPSockAddr (Use default/empty as on server)

//!								8. Set the BT address of the TL2CAPSockAddr to the one of the Casira pod of the slave that we connect to

//!								9. Verify the set BT Address

//!								10. Set the port to the specific one of the protocol we use

//!								11. Create and start a session on the socket server

//!								12. Open a Bluetooth socket using NewL() function. Return KErrNone if successful

//!								13. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								14. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								15. Bring in a new member to the piconet with the slave device address using 

//!								    CreateConnection() function. Return KErrNone if successful

//!								16. Return callback HandleCreateConnectionCompleteL() function

//!								17. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								18. Waiting for 10000000 micro secs

//!								19. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								20. Verify that if return RBTDevAddrArray size (decimal 0) is as expected (decimal 0)

//!								21. Use the TL2CAPSockAddr in the connect of the CBluetooth object

//!								22. HandleConnectCompleteL gets called indicating that connecting the BT connection completed

//!								23. Get result from slave

//!								24. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								25. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								26. Do socket cleanup by calling Shutdown()1

//!								27. HandleShutdownCompleteL gets called verify error code

//!								28. delete CBluetoothSocket object

//!								29. Enumerate connected members of the piconet with given maximum number of members (decimal 7) to be returned.

//!								    Return KErrNone if successful

//!								30. Verify that if return RBTDevAddrArray size (decimal 1) is as expected (decimal 1)

//!								31. Disconnect a single member of piconet with an invalid device address using CreateConnection() 

//!								    function. Return KErrNone if successful

//!								32. Return callback HandleDisconnectCompleteL() function

//!								33. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)

//!								34. Delete the Bluetooth socket using destructor

//!

//! @SYMTestStatus				Implemented

//! @SYMTestPriority			Critical

//! @SYMTestExpectedResults		Returned KErrNone from HandleDisconnectCompleteL() callback

//! @SYMTestType				CIT

	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	

			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			COMMAND		CBluetoothSocket1	RSocketServerConnect		

			COMMAND		CBluetoothSocket1	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0004-0001command2NewL

			COMMAND		TBTServiceSecurity1	Construct		

			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		

			COMMAND		TL2CAPSockAddr1	SetSecurity		BT-USER-PhysicalLinks-PublicApi-Active-0004-0001command7SetSecurity

			COMMAND		TL2CAPSockAddr1	SetBTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0004-0001command8SetBTAddr

			COMMAND		TL2CAPSockAddr1	BTAddr		BT-USER-PhysicalLinks-PublicApi-Active-0004-0001command9BTAddr

			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PhysicalLinks-PublicApi-Active-0004-0001command10SetPort

			STORE	CBluetoothSocket1	

			STORE	TBTDevAddrRemote	

			STORE	TL2CAPSockAddr1	

			STORE_ACTIVE_SCHEDULER

	END_TEST_BLOCK

	DELAY 5000

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase

	DELAY 5000

	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinks-PublicApi-Active-Master.ini

			SHARED_ACTIVE_SCHEDULER

			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	

			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	

			CREATE_OBJECT	RSocketServ	RSocketServData	

			CREATE_OBJECT	TBTDevAddr	TBTDevAddrData	

			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	

			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	

			COMMAND		TBTDevAddrData	Construct		

			COMMAND		RSocketServData	RSocketServ		

			COMMAND		RSocketServData	Connect		

			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command7NewL

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command8Enumerate

			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command9CreateConnection

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command11Enumerate

			COMMAND		CBluetoothSocket1	Connect		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command13Connect

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command15Enumerate

			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command17Shutdown

			OUTSTANDING	

			COMMAND		CBluetoothSocket1	~		

			COMMAND		CBluetoothSocket1	RSocketServerClose		

			COMMAND		CBluetoothPhysicalLinksData	Enumerate		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command22Enumerate

			COMMAND		CBluetoothPhysicalLinksData	Disconnect		BT-USER-PhysicalLinks-PublicApi-Active-0004-0002command23Disconnect

			OUTSTANDING	

			COMMAND		CBluetoothPhysicalLinksData	~		

			COMMAND		RSocketServData	Close		

			STORE	TBTDevAddrRemote	

	END_TEST_BLOCK

	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult

END_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0004

START_TESTCASE BT-USER-PhysicalLinks-PublicApi-Active-Master-0005

//! @SYMTestCaseID				BT-USER-PhysicalLinks-PublicApi-Active-Master-0005

//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, CBluetoothSocket, 

//!								MBluetoothSocketNotifier, TBTServiceSecurity

//! @SYMTestCaseDesc			Enumerate connected members of the piconet while defining the upper limit on numbers of members to be returned as 0

//!								Uses API elements: 	RSocketServ(), Connect() and Close() from RSocketServ

//!													NewL(), CreateConnection(), Enumerate() and destructor from CBluetoothPhysicalLinks

//!													HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier

//!													NewL()1, Connect()1, Shutdown()1 and destructor from CBluetoothSocket

//!													HandleConnectCompleteL() and HandleShutdownCompleteL() from MBluetoothSocketNotifier