//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

///////////////////////////////////////////////////////////////////////////////

//! @file

//! @SYMTestSuiteName			T_BTUserAPI

//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.

//! @SYMScriptDescription		Tests all public elements of the TRfcommRemotePortParams class

//!								as a means of confidence that the API works as expected. 

//!								The purpose is to provide a regression test suite of PublishedAll APIs for 

//!								BT USER related classes.

//!								Negative testing is performed to confirm that correct errors are returned 

//!								when incorrect parameters are given. The tests are fully automated.

//! @SYMAuthor					Cliff Chuang

//! @SYMCreationDate			08/03/2007

///////////////////////////////////////////////////////////////////////////////

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\

RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\

LOAD_SUITE	T_BTUserAPI

DELAY		500

// ****************************************************************************

// TRfcommRemotePortParams

// **************************************************************************** 

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9001

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9001

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Create a TRfcommRemotePortParams object

//!									Uses API elements: TRfcommRemotePortParams()

//! @SYMTestActions					Construct a new empty TRfcommRemotePortParams object

//!	

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Object created

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9001

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9002

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9002

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Get a set of flags indicating which of the port parameters have been set

//!									Uses API elements: TRfcommRemotePortParams() and IsValid()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Get a set of flags indicating which of the port parameters have been set

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Zero returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	IsValid		BT-USER-RfcommRemotePortParams-PublicApi-0002-0001command2IsValid

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9002

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9003

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9003

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set the XOFF character used with XON/XOFF flow control

//!									Uses API elements: TRfcommRemotePortParams(), SetXOffChar() and IsValid()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Set the TRfcommRemotePortParams XOFF character (decimal 19) to use with XON/XOFF flow control and return KErrNone

//!									3. Get a set of flags (EVMXOffChar of the TRPNValidityMask) indicating which of the port parameters have been set

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetXOffChar		BT-USER-RfcommRemotePortParams-PublicApi-0003-0001command2SetXOffChar

			COMMAND		RFCOMMRemotePortParams	IsValid		BT-USER-RfcommRemotePortParams-PublicApi-0003-0001command3IsValid

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9003

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9004

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9004

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set and get the XOFF character used with XON/XOFF flow control

//!									Uses API elements: TRfcommRemotePortParams(), SetXOffChar() and GetXOffChar()

//! @SYMTestActions					1. Create a new empty TRfcommRemotePortParams object

//!									2. Get the TRfcommRemotePortParams XOFF character. Verify that the result (False) is as expected (False)

//!									3. Set the TRfcommRemotePortParams XOFF character (decimal 19) and return KErrNone

//!									4. Get the TRfcommRemotePortParams XOFF character

//!									5. Verify that True if XOFF character (decimal 19) has been set with expected value (decimal 19)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if XOFF character has been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetXOffChar		BT-USER-RfcommRemotePortParams-PublicApi-0004-0001command2GetXOffChar

			COMMAND		RFCOMMRemotePortParams	SetXOffChar		BT-USER-RfcommRemotePortParams-PublicApi-0004-0001command3SetXOffChar

			COMMAND		RFCOMMRemotePortParams	GetXOffChar		BT-USER-RfcommRemotePortParams-PublicApi-0004-0001command4GetXOffChar

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9004

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9005

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9005

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Sets the XON character used with XON/XOFF flow control

//!									Uses API elements: TRfcommRemotePortParams(), SetXOnChar() and IsValid()

//! @SYMTestActions					1. Create a new empty TRfcommRemotePortParams object

//!									2. Set the TRfcommRemotePortParams XON character (decimal 17) to use with XON/XOFF flow control and return KErrNone

//!									3. Get a set of flags (EVMXOnChar of the TRPNValidityMask) indicating which of the port parameters have been set

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetXOnChar		BT-USER-RfcommRemotePortParams-PublicApi-0005-0001command2SetXOnChar

			COMMAND		RFCOMMRemotePortParams	IsValid		BT-USER-RfcommRemotePortParams-PublicApi-0005-0001command3IsValid

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9005

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9006

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9006

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set and get the XON character used with XON/XOFF flow control

//!									Uses API elements: TRfcommRemotePortParams(), SetXOnChar() and GetXOnChar()

//! @SYMTestActions					1. Create a new empty TRfcommRemotePortParams object

//!									2. Get the TRfcommRemotePortParams XON character. Verify that the result (False) is as expected (False)

//!									3. Set the TRfcommRemotePortParams XON character(decimal 17) and return KErrNone

//!									4. Get the TRfcommRemotePortParams XON character.

//!									5. Verify that True if XON character (decimal 17) has been set with expected value (decimal 17)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if XON character has been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetXOnChar		BT-USER-RfcommRemotePortParams-PublicApi-0006-0001command2GetXOnChar

			COMMAND		RFCOMMRemotePortParams	SetXOnChar		BT-USER-RfcommRemotePortParams-PublicApi-0006-0001command3SetXOnChar

			COMMAND		RFCOMMRemotePortParams	GetXOnChar		BT-USER-RfcommRemotePortParams-PublicApi-0006-0001command4GetXOnChar

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9006

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9007

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9007

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set the flow control methods for the port

//!									Uses API elements: TRfcommRemotePortParams(), SetFlowCtrl() and IsValid()

//! @SYMTestActions					1. Create a new empty TRfcommRemotePortParams object

//!									2. Set the TRfcommRemotePortParams RTR flow control for data output (decimal 8) and return KErrNone

//!									3. Get a set of flags (EVMFlowCtrl of the TRPNValidityMask)indicating which of the port parameters have been set

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0007-0001command2SetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	IsValid		BT-USER-RfcommRemotePortParams-PublicApi-0007-0001command3IsValid

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9007

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9008

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9008

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Get and set the flow control method for the port

//!									Uses API elements: TRfcommRemotePortParams(), SetFlowCtrl() and GetFlowCtrl()

//! @SYMTestActions					1. Create a new empty TRfcommRemotePortParams object

//!									2. Get the flow control for the port. Verify that the result (False) is as expected (False)

//!									3. Set the TRfcommRemotePortParams RTR flow control for data output (decimal 1024) and return KErrNone

//!									4. Get the flow control for the port. 

//!									5. Verify that True if flow control (decimal 32) has been set with expected value (decimal 32)

//!									

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if Flow control has been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0008-0001command2GetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	SetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0008-0001command3SetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0008-0001command4GetFlowCtrl

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9008

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9009

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9009

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Update flow control value with new value

//!									Uses API elements: TRfcommRemotePortParams(), SetFlowCtrl(), GetFlowCtrl() and UpdateWholeFlowCtrl()

//! @SYMTestActions					1. Create a new empty TRfcommRemotePortParams object

//!									2. Set the TRfcommRemotePortParams RTR flow control for data input (decimal 1024) and return KErrNone

//!									3. Get the flow control for the port.

//!									4. Verify that True if flow control (decimal 1024) has been set with expected value (decimal 1024)

//!									5. Update flow control bit with flow mask (decimal 32) and a specified flow control bit (decimal 2) 

//!									6. Get the flow control for the port. 

//!									7. Verify that True if flow control (decimal 0) has been set with expected value (decimal 0)

//!									8. Update flow control bit with flow mask (decimal 1024) and a specified flow control bit (decimal 16) 

//!									9. Get the flow control for the port. 

//!									10. Verify that True if flow control (decimal 1024) has been set with expected value (decimal 1024)

//!									11. Update flow control bit with flow mask (decimal 8192) and a specified flow control bit (decimal 48) 

//!									12. Get the flow control for the port. 

//!									13. Verify that True if flow control (decimal 32) has been set with expected value (decimal 32)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Flow control value updated

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command2SetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command3GetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	UpdateWholeFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command4UpdateWholeFlowCtrl

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command5GetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	UpdateWholeFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command6UpdateWholeFlowCtrl

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command7GetFlowCtrl

			COMMAND		RFCOMMRemotePortParams	UpdateWholeFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command8UpdateWholeFlowCtrl

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0009-0001command9GetFlowCtrl

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9009

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9010

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9010

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Constructor Set the flow control bit specified by TRPNFlowCtrlMask to the same value it has in a flow ctrol bit

//!									Uses API elements: TRfcommRemotePortParams(), GetFlowCtrl() and UpdateFlowCtrlBit()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Construct the TRfcommRemotePortParams flow control bit (decimal 33) as EFCRTOutput

//!									3. Get the TRfcommRemotePortParams flow control bit. Verify that True if flow control has been set with 

//!									   expected value (decimal 32)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			Set the flow control bit successfully

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	UpdateFlowCtrlBit		BT-USER-RfcommRemotePortParams-PublicApi-0010-0001command2UpdateFlowCtrlBit

			COMMAND		RFCOMMRemotePortParams	GetFlowCtrl		BT-USER-RfcommRemotePortParams-PublicApi-0010-0001command3GetFlowCtrl

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9010

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9011

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9011

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set the number of stop bits transmitted

//!									Uses API elements: TRfcommRemotePortParams() and SetStopBit()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Set the number of stop bits transmitted (EStop1) and return KErrNone

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetStopBit		BT-USER-RfcommRemotePortParams-PublicApi-0011-0001command2SetStopBit

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9011

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9012

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9012

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Get and set the stop bit

//!									Uses API elements: TRfcommRemotePortParams(), SetStopBit(), and GetStopBit()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Get the number of bits transmitted. Verify that the result (False) is as expected (False)

//!									2. Set the number of stop bits transmitted (EStop2) and return KErrNone

//!									3. Get the number of bits transmitted. 

//!									4. Verify that True if stop bits(EStop2) has been set with expected value (EStop2)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if Stop bit has been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetStopBit		BT-USER-RfcommRemotePortParams-PublicApi-0012-0001command2GetStopBit

			COMMAND		RFCOMMRemotePortParams	SetStopBit		BT-USER-RfcommRemotePortParams-PublicApi-0012-0001command3SetStopBit

			COMMAND		RFCOMMRemotePortParams	GetStopBit		BT-USER-RfcommRemotePortParams-PublicApi-0012-0001command4GetStopBit

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9012

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9013

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9013

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set the parity type

//!									Uses API elements: TRfcommRemotePortParams() and SetParity()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Set the parity type (EParityNone) and return KErrNone

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetParity		BT-USER-RfcommRemotePortParams-PublicApi-0013-0001command2SetParity

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9013

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9014

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9014

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Get and set the parity

//!									Uses API elements: TRfcommRemotePortParams(), SetParity(), and GetParity()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Get the parity type. Verify that the result (False) is as expected (False)

//!									3. Set the parity type (EParitySpace) and return KErrNone

//!									4. Get the parity type. 

//!									5. Verify that true if parity bits (EParitySpace) has been set with expected value (EParitySpace)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True fi Parity has been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetParity		BT-USER-RfcommRemotePortParams-PublicApi-0014-0001command2GetParity

			COMMAND		RFCOMMRemotePortParams	SetParity		BT-USER-RfcommRemotePortParams-PublicApi-0014-0001command3SetParity

			COMMAND		RFCOMMRemotePortParams	GetParity		BT-USER-RfcommRemotePortParams-PublicApi-0014-0001command4GetParity

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9014

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9015

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9015

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set the number of bits transmitted per character

//!									Uses API elements: TRfcommRemotePortParams() and SetDataBits()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Set the number of bits transmitted per character (EData6) and return KErrNone

//!									3. Set the number of bits transmitted per character (EData5) and return KErrNone

//!									4. Set the number of bits transmitted per character (EData7) and return KErrNone

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0015-0001command2SetDataBits

			COMMAND		RFCOMMRemotePortParams	SetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0015-0001command2SetDataBits

			COMMAND		RFCOMMRemotePortParams	SetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0015-0001command3SetDataBits

			COMMAND		RFCOMMRemotePortParams	SetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0015-0001command4SetDataBits

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9015

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9016

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9016

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Get and set the data bits

//!									Uses API elements: TRfcommRemotePortParams(), SetDataBits(), and GetDataBits()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Get the number of bits transmitted per character. Verify that the result (False) is as expected (False)

//!									3. Set the number of bits transmitted per character (EData8) and return KErrNone

//!									4. Get the number of bits transmitted per character

//!                                 5. Verify that True if data bits (EData8) has been set with expected value (EData8)

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if Data bits have been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0016-0001command2GetDataBits

			COMMAND		RFCOMMRemotePortParams	SetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0016-0001command3SetDataBits

			COMMAND		RFCOMMRemotePortParams	GetDataBits		BT-USER-RfcommRemotePortParams-PublicApi-0016-0001command4GetDataBits

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9016

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9017

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9017

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set the bit rate for the port

//!									Uses API elements: TRfcommRemotePortParams() and SetBitRate()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Set the bit rate for the port (EBps38400) and return KErrNone

//!									3. Set the bit rate for the port (EBps19200) and return KErrNone

//!									4. Set the bit rate for the port (EBps57600) and return KErrNone

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults         KErrNone returned

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	SetBitRate		BT-USER-RfcommRemotePortParams-PublicApi-0017-0001command2SetBitRate

			COMMAND		RFCOMMRemotePortParams	SetBitRate		BT-USER-RfcommRemotePortParams-PublicApi-0017-0001command3SetBitRate

			COMMAND		RFCOMMRemotePortParams	SetBitRate		BT-USER-RfcommRemotePortParams-PublicApi-0017-0001command4SetBitRate

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9017

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9018

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9018

//! @SYMAPI							TRfcommRemotePortParams

//! @SYMTestCaseDesc				Set and get the bit rate for the port

//!									Uses API elements: TRfcommRemotePortParams(), SetBitRate(), and GetBitRate()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Get the bit rate for the port. Verify that the result (False) is as expected (False)

//!									3. Set the bit rate for the port (EBps38400) and return KErrNone

//!									4. Get the bit rate for the port

//!									5. Verify that true if bit rate (EBps38400) has been set as expected value (EBps38400) 

//!

//! @SYMTestStatus					Implemented

//! @SYMTestPriority				Low

//! @SYMTestExpectedResults			True if Bit Rate has been set, otherwise False

//! @SYMTestType					CIT

	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-RfcommRemotePortParams-PublicApi.ini

			CREATE_OBJECT	TRfcommRemotePortParams	RFCOMMRemotePortParams	

			COMMAND		RFCOMMRemotePortParams	TRfcommRemotePortParams		

			COMMAND		RFCOMMRemotePortParams	GetBitRate		BT-USER-RfcommRemotePortParams-PublicApi-0018-0001command2GetBitRate

			COMMAND		RFCOMMRemotePortParams	SetBitRate		BT-USER-RfcommRemotePortParams-PublicApi-0018-0001command3SetBitRate

			COMMAND		RFCOMMRemotePortParams	GetBitRate		BT-USER-RfcommRemotePortParams-PublicApi-0018-0001command4GetBitRate

	END_TEST_BLOCK

END_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9018

START_TESTCASE BT-USER-RfcommRemotePortParams-PublicApi-9019

//! @SYMTestCaseID					BT-USER-RfcommRemotePortParams-PublicApi-9019

//! @SYMAPI							TRfcommRemotePortParams and TRfcommRPNTransaction

//! @SYMTestCaseDesc				Update all port parameters through a TRfcommRPNTransaction value

//!									Uses API elements:	TRfcommRemotePortParams::TRfcommRemotePortParams() 

//!														SetXOffChar(), SetXOnChar(), SetStopBit(), SetParity(),

//!														SetDataBits(), SetBitRate(), GetXOffChar(), GetXOnChar(),

//!														GetStopBit(), GetParity(), GetDataBits(), GetBitRate() 

//!														and UpdateFromPRNTransaction()

//!														TRfcommRPNTransaction::TRfcommRPNTransaction()

//! @SYMTestActions					1. Construct a new empty TRfcommRemotePortParams object

//!									2. Set the TRfcommRemotePortParams XOFF character (decimal 19) and return KErrNone

//!									3. Set the TRfcommRemotePortParams XON character(decimal 17) and return KErrNone

//!									4. Set the number of stop bits transmitted (EStop1) and return KErrNone

//!									5. Set the parity type (EParitySpace) and return KErrNone

//!									6. Set the number of bits transmitted per character (EData8) and return KErrNone

//!									7. Set the bit rate for the port (EBps38400) and return KErrNone

//!									8. Construct a new empty TRfcommRPNTransaction object

//!									9. Set iParaMask with a flow mask (decimal 111) and set iPortParams with

//!									   TRfcommRemotePortParams object to TRfcommRPNTransaction object

//!									10. Construct another new empty TRfcommRemotePortParams object

//!									11. Update using the TRfcommRPNTransaction value