bluetoothapitest/bluetoothsvs/t_btgavdpapi/scripts/bt-gavdp-publishedpartner-passive-slave.script
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/bluetoothapitest/bluetoothsvs/t_btgavdpapi/scripts/bt-gavdp-publishedpartner-passive-slave.script Fri Jan 15 08:13:17 2010 +0200
@@ -0,0 +1,1808 @@
+//
+// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+///////////////////////////////////////////////////////////////////////////////
+//! @file
+//! @SYMTestSuiteName T_BTGavdp
+//! @SYMScriptTestEnvironment This test script requires a basic ROM with bluetooth dongle.
+//! @SYMScriptDescription
+//! @SYMAuthor Niandong Qiao, Jianhui Ren, Kevin Zeng
+//! @SYMCreationDate 05-06-2008
+///////////////////////////////////////////////////////////////////////////////
+
+RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\
+RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\gavdp\
+
+LOAD_SUITE t_btgavdpapi -SharedData
+DELAY 500
+
+
+// ****************************************************************************
+// Set up BT Addresses
+// ****************************************************************************
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT CBluetoothSocket bluetoothsocket1
+ CREATE_OBJECT TRfcommSockAddr rfcommsockaddr1
+ CREATE_OBJECT TBTDevAddr addrlocal
+ COMMAND bluetoothsocket1 RSocketServerConnect
+ COMMAND bluetoothsocket1 NewL BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-NewL_Command02
+ COMMAND rfcommsockaddr1 Construct
+ COMMAND rfcommsockaddr1 SetFamily BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-SetFamily_Command04
+ COMMAND rfcommsockaddr1 SetPort BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-SetPort_Command05
+ COMMAND bluetoothsocket1 Bind BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-Bind_Command06
+ COMMAND bluetoothsocket1 Listen BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-Listen_Command07
+ COMMAND addrlocal Construct
+ COMMAND addrlocal OpenHostResolver BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-OpenHostResolver_Command09
+ COMMAND addrlocal SetHostNameL BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001-SetHostNameL_Command10
+ COMMAND addrlocal SetDiscoverable
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0001
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0002
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses-0002
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-SetBTAddresses
+
+// ****************************************************************************
+// RGavdp Tests
+// ****************************************************************************
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0001
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0001
+//! @SYMAPI RGavdp::RGavdp();
+//! RGavdp::Open(MGavdpUser {ref}, RSocketServ {ref})
+//! RGavdp::Close()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Create a RGavdp object by default constructor and then open and close it.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. RGavdp object was created without causing panic.
+//! 2. Method RGavdp::Open() return KErrNone.
+//! 3. Method RGavdp::Close() called without causing panic.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0001-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0001-0001-Open_Command04
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0001-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0001
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0002
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0002
+//! @SYMAPI RGavdp::RegisterSEP(TAvdtpSEPInfo {ref});
+//! RGavdp::BeginConfiguringLocalSEP(TSEID);
+//! RGavdp::AddSEPCapability(const TAvdtpServiceCapability {ref});
+//! RGavdp::CommitSEPConfiguration();
+//! MGavdpUser::GAVDP_ConfigurationConfirm()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Configure a local SEP.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Method RGavdp::RegisterSEP() return KErrNone.
+//! 2. Method RGavdp::BeginConfiguringLocalSEP() return KErrNone.
+//! 3. Method RGavdp::AddSEPCapability() return KErrNone.
+//! 4. Method RGavdp::CommitSEPConfiguration() called without causing panic.
+//! 5. The callback function MGavdpUser::GAVDP_ConfigurationConfirm() is called when locally-initiated configuration procedure successfully completes.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0002-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0002
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0003
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0003
+//! @SYMAPI RGavdp::Listen ();
+//! MGavdpUser::GAVDP_ConnectConfirm(const TBTDevAddr {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept a connect from a peer device.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Method Listen() return KErrNone.
+//! 2. The call back function MGavdpUser::GAVDP_ConnectConfirm() is called when a signalling channel has successfully been created.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001-Listen_Command29
+ OUTSTANDING
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0003-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0003
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0004
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0004
+//! @SYMAPI RGavdp::DiscoverRemoteSEPs();
+//! MGavdpUser::GAVDP_SEPDiscovered(const TAvdtpSEPInfo {ref});
+//! MGavdpUser::GAVDP_SEPDiscoveryComplete()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Set local SEPs and wait for SEP discovering from remote device.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Delay 5 second and wait for SEP discovering from remote device.
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Number of discovered SEPs is as expected.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0004-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0004
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0005
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0005
+//! @SYMAPI RGavdp:: GetRemoteSEPCapabilities(TSEID, const TAvdtpServiceCategories {ref});
+//! MGavdpUser::GAVDP_SEPCapability(TAvdtpServiceCapability {ptr});
+//! MGavdpUser::GAVDP_SEPCapabilityComplete()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Set a local SEP and wait for remote device to get capabilities of this SEP.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Delay 5 second and wait for remote device to get capabilities of local SEP.
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Received capabilities at remote device is same as capabilities of local SEP.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0005-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0005
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0006
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0006
+//! @SYMAPI MGavdpUser::GAVDP_ConfigurationStartIndication(TSEID, TSEID);
+//! MGavdpUser::GAVDP_ConfigurationIndication(TAvdtpServiceCapability {ptr});
+//! MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept remotely initiated configuration of local SEP.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_ConfigurationStartIndication() is called when remote is beginning to configure a local SEP.
+//! 2. The call back function GAVDP_ConfigurationIndication() is called when each capability is being proposed by the peer during configuration.
+//! 3. The call back function GAVDP_ConfigurationEndIndication() is called when remotely initiated configuration of local SEP is completed.
+//! 4. Number of received capabilities is as expected.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0006-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0006
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0007
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0007
+//! @SYMAPI MGavdpUser::GAVDP_BearerReady(RSocket, const TAvdtpSockAddr {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Receive remotely cteated bearers.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 13. Close bearers
+//! 14. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_BearerReady() is called when a bearer has been created for a session in the stream.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001-Listen_Command29
+ OUTSTANDING
+
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0007-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0007
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0008
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0008
+//! @SYMAPI MGavdpUser::GAVDP_StartIndication(TSEID);
+//! MGavdpUser::GAVDP_AbortIndication(TSEID)
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept start stream and abort stream from remote device.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_StartIndication().
+//! 13. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 14. Close bearers
+//! 15. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_StartIndication() is called when the remote is trying to Start a stream.
+//! 2. The call back function GAVDP_AbortIndication() is called when the remote has Aborted the stream.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0008-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0008
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0009
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0009
+//! @SYMAPI RGavdp::CreateBearerSockets(TSEID, TBool, TBool)
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Receive data through created socket.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_StartIndication().
+//! 13. Read data.
+//! 14. Wait for call back to RunL().
+//! 15. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 16. Close bearers.
+//! 17. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Received data is as expected.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-Listen_Command29
+ OUTSTANDING
+
+ COMMAND gavdp Read BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-Read_Command31
+ OUTSTANDING
+
+ COMMAND gavdp IncOutstanding BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001-IncOutstanding_Command33
+ OUTSTANDING
+
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0009-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0009
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0010
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0010
+//! @SYMAPI MGavdpUser::GAVDP_SuspendIndication(TSEID)
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept suspend stream and restart stream from remote device.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_StartIndication().
+//! 13. Wait for call back to MGavdpUser::GAVDP_SuspendIndication()
+//! 14. Wait for call back to MGavdpUser::GAVDP_StartIndication()
+//! 15. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 16. Close bearers
+//! 17. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_SuspendIndication() is called when the remote is trying to Suspend a stream.
+//! 2. The call back function GAVDP_StartIndication() is called when the remote is trying to Start a stream.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0010-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0010
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0011
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0011
+//! @SYMAPI MGavdpUser::GAVDP_SecurityControlIndication(TSEID, TDes8 {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept security control information from remote device and don not change the security data.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to MGavdpUser::GAVDP_SecurityControlIndication()
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_SecurityControlIndication() is called when the remote is sending Security Control information.
+//! 2. Received data is as expected.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0011-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0011
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0012
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0012
+//! @SYMAPI MGavdpUser::GAVDP_SecurityControlIndication(TSEID, TDes8 {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept security control information from remote device and change the security data.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to MGavdpUser::GAVDP_SecurityControlIndication()
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_SecurityControlIndication() is called when the remote is sending Security Control information.
+//! 2. Received data is as expected.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0012-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0012
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0013
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0013
+//! @SYMAPI MGavdpUser::GAVDP_ReleaseIndication(TSEID)
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Callback to MGavdpUser::GAVDP_ReleaseIndication(TSEID) when the remote end has Released a stream.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_StartIndication().
+//! 13. Read data.
+//! 14. Wait for call back to RunL().
+//! 15. Wait for call back to MGavdpUser::GAVDP_ReleaseIndication().
+//! 16. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function MGavdpUser::GAVDP_ReleaseIndication() is called when the remote end has Released a stream.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-Listen_Command29
+ OUTSTANDING
+
+ COMMAND gavdp Read BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-Read_Command31
+ OUTSTANDING
+
+ COMMAND gavdp IncOutstanding BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001-IncOutstanding_Command33
+ OUTSTANDING
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0013-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0013
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0014
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0014
+//! @SYMAPI RGavdp::Cancel()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Cancel a command of start stream.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_StartIndication().
+//! 13. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 14. Close bearers
+//! 15. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_StartIndication() is called when the remote end has canceled a start stream command.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0014-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0014
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0016
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0016
+//! @SYMAPI MGavdpUser::GAVDP_Error(TInt, const TDesC8 {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc GAVDP error occurs.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 13. Close bearers
+//! 14. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_Error() is called when a GAVDP error occurs.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0016-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0016
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0017
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0017
+//! @SYMAPI RGavdp::Connect(const TBTDevAddr {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Negative test, connect to a not ready remote device.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function MGavdpUser::GAVDP_ConnectConfirm() is not called.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ DELAY 5000000
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0017-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0017
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0018
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0018
+//! @SYMAPI RGavdp::CommitSEPConfiguration()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Reject remotely initiated configuration of local SEP.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication(), at here reject it with -2.
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_ConfigurationEndIndication() is called when remotely initiated configuration of local SEP is completed.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0018-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0018
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0019
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0019
+//! @SYMAPI RGavdp::Listen()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Negative test, call listen() again after local SEP has been connected.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Call listen() again.
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Method Listen() return -14 when call it again.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001-Listen_Command29
+ OUTSTANDING
+ COMMAND !Error=-14 gavdp Listen
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0019-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0019
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0020
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0020
+//! @SYMAPI MGavdpUser::GAVDP_ConfigurationStartIndication(TSEID, TSEID);
+//! MGavdpUser::GAVDP_ConfigurationIndication(TAvdtpServiceCapability {ptr});
+//! MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Accept remotely initiated reconfiguration of local SEP.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 12. Wait for call back to
+//! 12.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 12.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 12.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 13. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_ConfigurationStartIndication() is called when remote is beginning to configure/reconfigure a local SEP.
+//! 2. The call back function GAVDP_ConfigurationIndication() is called when each capability is being proposed by the peer during configuration/reconfiguration.
+//! 3. The call back function GAVDP_ConfigurationEndIndication() is called when remotely initiated configuration/reconfiguration of local SEP is completed.
+//! 4. Number of received capabilities is as expected.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001-Listen_Command29
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0020-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0020
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0021
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0021
+//! @SYMAPI MGavdpUser::GAVDP_BearerReady(RSocket, const TAvdtpSockAddr {ref})
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Receive remotely cteated transport bearer.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio).
+//! 4. Begin configuration of this SEP.
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration.
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm().
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Wait for call back to
+//! 10.1. MGavdpUser::GAVDP_ConfigurationStartIndication()
+//! 10.2. MGavdpUser::GAVDP_ConfigurationIndication()
+//! 10.3. MGavdpUser::GAVDP_ConfigurationEndIndication()
+//! 11. Wait for call back to MGavdpUser::GAVDP_BearerReady().
+//! 12. Wait for call back to MGavdpUser::GAVDP_AbortIndication().
+//! 13. Close bearer.
+//! 14. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. The call back function GAVDP_BearerReady() is called when the transport bearer has been created for a session in the stream.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-AddSEPCapability_Command24
+ COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-new_Command25
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-AddSEPCapability_Command26
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-CommitSEPConfiguration_Command27
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001-Listen_Command29
+ OUTSTANDING
+
+ COMMAND gavdp CloseBearerSockets
+
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0021-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0021
+
+START_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0022
+//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Passive-Slave-0022
+//! @SYMAPI RGavdp:: GetRemoteSEPCapabilities(TSEID, const TAvdtpServiceCategories {ref});
+//! MGavdpUser::GAVDP_Error()
+//! @SYMAuthor Niandong Qiao
+//! @SYMCreationDate 05-06-2008
+//! @SYMTestCaseDesc Set a local SEP and wait for remote device to get capabilities of this SEP.
+//! @SYMTestActions 1. Create a RGavdp object by default constructor.
+//! 2. Open a GAVDP session.
+//! 3. Register SEP (sink & audio)
+//! 4. Begin configuration of this SEP
+//! 5. Add local SEP capabilities:
+//! 5.1. TAvdtpMediaTransportCapabilities
+//! 5.2. TAvdtpReportingCapabilities
+//! 5.3. TAvdtpRecoveryCapabilities
+//! 5.4. TAvdtpContentProtectionCapabilities
+//! 5.5. TNonSBCCodecCapabilities
+//! 6. Commit the local SEP configuration
+//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
+//! 8. Begin to listen.
+//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
+//! 10. Delay 5 second and wait for remote device to get capabilities of local SEP.
+//! 11. Closes the GAVDP session.
+//! @SYMTestStatus Implemented
+//! @SYMTestPriority High
+//! @SYMTestExpectedResults 1. Received capabilities at remote device is same as capabilities of local SEP.
+//! @SYMTestType CIT
+ START_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001
+ START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-passive-slave.ini
+ SHARED_ACTIVE_SCHEDULER
+ CREATE_OBJECT RSocketServ socketserv
+ CREATE_OBJECT RGavdp gavdp
+ CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
+ CREATE_OBJECT TSEID localseid1
+ CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
+ CREATE_OBJECT TAvdtpReportingCapabilities capreport1
+ CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
+ CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
+ CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
+
+ COMMAND socketserv RSocketServ
+ COMMAND socketserv Connect
+ COMMAND gavdp new
+ COMMAND gavdp Open BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-Open_Command04
+
+ COMMAND localsepinfo1 new
+ COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetIsSink_Command06
+ COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetMediaType_Command07
+ COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-RegisterSEP_Command08
+ COMMAND localseid1 new
+ COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SEID_Command10
+ COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-BeginConfiguringLocalSEP_Command11
+ COMMAND captransport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-AddSEPCapability_Command13
+ COMMAND capreport1 new
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-AddSEPCapability_Command15
+ COMMAND caprecovery1 new
+ COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetRecoveryType_Command17
+ COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetMaxWindowSize_Command18
+ COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetMinWindowSize_Command19
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-AddSEPCapability_Command20
+ COMMAND capprotect1 new
+ COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetContentProtectionType_Command22
+ COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-SetContentProtectionData_Command23
+ COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-AddSEPCapability_Command24
+ COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-CommitSEPConfiguration_Command25
+ OUTSTANDING
+
+ COMMAND gavdp Listen BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001-Listen_Command27
+ OUTSTANDING
+
+ DELAY 5000000
+ COMMAND gavdp Close
+ COMMAND socketserv Close
+ STORE_ACTIVE_SCHEDULER
+ END_TEST_BLOCK
+ END_SYNCHRONISED_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0022-0001
+END_TESTCASE BT-GAVDP-PublishedPartner-Passive-Slave-0022
+