bluetoothapitest/bluetoothsvs/t_btgavdpapi/scripts/bt-gavdp-publishedpartner-active-master.script
//
// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
//
///////////////////////////////////////////////////////////////////////////////
//! @file
//! @SYMTestSuiteName T_BTGavdp
//! @SYMScriptTestEnvironment This test script requires a basic ROM with bluetooth dongle.
//! @SYMScriptDescription
//! @SYMAuthor Niandong Qiao, Jianhui Ren, Kevin Zeng
//! @SYMCreationDate 05-06-2008
///////////////////////////////////////////////////////////////////////////////
RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\
RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\gavdp\
LOAD_SUITE UCCControlTE
LOAD_SUITE t_btgavdpapi -SharedData
DELAY 2000
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncService
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartTDService
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini BuildRunGavdpPassiveSlave
DELAY 5000
// ****************************************************************************
// Set up BT Addresses
// ****************************************************************************
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-SetBTAddresses
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
CREATE_OBJECT CBluetoothSocket bluetoothsocket1
COMMAND bluetoothsocket1 RSocketServerConnect
COMMAND bluetoothsocket1 NewL BT-GAVDP-PublishedPartner-Active-Master-SetBTAddresses-0001-NewL_Command02
STORE bluetoothsocket1
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT CBluetoothSocket bluetoothsocket1
CREATE_OBJECT TBTDevAddr addrremote
COMMAND addrremote Construct
COMMAND addrremote OpenHostResolver BT-GAVDP-PublishedPartner-Active-Master-SetBTAddresses-0002-OpenHostResolver_Command02
COMMAND addrremote SetHostNameL BT-GAVDP-PublishedPartner-Active-Master-SetBTAddresses-0002-SetHostNameL_Command03
COMMAND addrremote GetDeviceAddress BT-GAVDP-PublishedPartner-Active-Master-SetBTAddresses-0002-GetDeviceAddress_Command04
OUTSTANDING
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-SetBTAddresses
DELAY 5000
// ****************************************************************************
// RGavdp Tests
// ****************************************************************************
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0001
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0001
//! @SYMAPI RGavdp::RGavdp();
//! RGavdp::Open(MGavdpUser {ref}, RSocketServ {ref});
//! RGavdp::Close()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Create a RGavdp object by default constructor and then open and close it.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. RGavdp object was created without causing panic.
//! 2. Method RGavdp::Open() return KErrNone.
//! 3. Method RGavdp::Close() called without causing panic.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0001-0001-Open_Command04
COMMAND gavdp Close
COMMAND socketserv Close
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0001
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0002
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0002
//! @SYMAPI RGavdp::RegisterSEP(TAvdtpSEPInfo {ref});
//! RGavdp::BeginConfiguringLocalSEP(TSEID);
//! RGavdp::AddSEPCapability(const TAvdtpServiceCapability {ref});
//! RGavdp::CommitSEPConfiguration();
//! MGavdpUser::GAVDP_ConfigurationConfirm()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Configure a local SEP.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method RGavdp::RegisterSEP() return KErrNone.
//! 2. Method RGavdp::BeginConfiguringLocalSEP() return KErrNone.
//! 3. Method RGavdp::AddSEPCapability() return KErrNone.
//! 4. Method RGavdp::CommitSEPConfiguration() called without causing panic.
//! 5. The callback function MGavdpUser::GAVDP_ConfigurationConfirm() is called when locally-initiated configuration procedure successfully completes.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0002-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0002-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0002-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0002-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0002-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0002-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0002-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0002-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0002-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0002-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0002-0001-CommitSEPConfiguration_Command27
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0002
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0003
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0003
//! @SYMAPI RGavdp::Connect(const TBTDevAddr {ref});
//! MGavdpUser::GAVDP_ConnectConfirm(const TBTDevAddr {ref});
//! RGavdp::Shutdown()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Connect to a remote device.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Shutdown the GAVDP.
//! 11. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method Connect() return KErrNone.
//! 2. The call back function MGavdpUser::GAVDP_ConnectConfirm() is called when a signalling channel has successfully been created.
//! 3. Method Shutdown()return KErrNone.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0003-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0003-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0003-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0003-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0003-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0003-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0003-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0003-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0003-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0003-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0003-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0003-0001-Connect_Command29
OUTSTANDING
COMMAND gavdp Shutdown
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0003
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0004
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0004
//! @SYMAPI RGavdp::DiscoverRemoteSEPs();
//! MGavdpUser::GAVDP_SEPDiscovered(const TAvdtpSEPInfo {ref});
//! MGavdpUser::GAVDP_SEPDiscoveryComplete()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Discover remote SEPs on peer device.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method DiscoverRemoteSEPs() return KErrNone.
//! 2. The call back function MGavdpUser::GAVDP_SEPDiscovered() is called when a remote SEP has been discovered .
//! 3. The call back function MGavdpUser::GAVDP_SEPDiscoveryComplete() is called when no more SEPs have been discovered on the remote device.
//! 4. Number of discovered SEPs is as expected.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0004-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0004-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0004-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0004-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0004-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0004-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0004-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0004-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0004-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0004-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0004-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0004-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0004-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0004
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0005
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0005
//! @SYMAPI RGavdp:: GetRemoteSEPCapabilities(TSEID, const TAvdtpServiceCategories {ref});
//! MGavdpUser::GAVDP_SEPCapability(TAvdtpServiceCapability {ptr});
//! MGavdpUser::GAVDP_SEPCapabilityComplete()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Get all capabilities of a remote SEP.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Get all capabilities of a remote SEP.
//! 13. Wait for call back to GAVDP_SEPCapability() and MGavdpUser::GAVDP_SEPCapabilityComplete()
//! 14. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method MGavdpUser::GetRemoteSEPCapabilities() return KErrNone.
//! 2. The call back function MGavdpUser::GAVDP_SEPCapability() is called when a capability from a remote SEP has been retrieved.
//! 3. The call back function MGavdpUser::GAVDP_SEPCapabilityComplete() is called when remote SEP has no more capabilities to be discovered.
//! 4. Received capabilities is same as capabilities of remote SEP.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport2
CREATE_OBJECT TAvdtpReportingCapabilities capreport2
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery2
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect2
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0005-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0005-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0005-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0005-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0005-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0005-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0005-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0005-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0005-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0005-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0005-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0005-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND captransport2 new
COMMAND capreport2 new
COMMAND caprecovery2 new
COMMAND caprecovery2 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetRecoveryType_Command37
COMMAND caprecovery2 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetMaxWindowSize_Command38
COMMAND caprecovery2 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetMinWindowSize_Command39
COMMAND capprotect2 new
COMMAND capprotect2 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetContentProtectionType_Command41
COMMAND capprotect2 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0005-0001-SetContentProtectionData_Command42
COMMAND gavdp GetRemoteSEPCapabilities BT-GAVDP-PublishedPartner-Active-Master-0005-0001-GetRemoteSEPCapabilities_Command43
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0005
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0006
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0006
//! @SYMAPI RGavdp::BeginConfiguringRemoteSEP(TSEID, TSEID);
//! RGavdp::AddSEPCapability(const TAvdtpServiceCapability {ref});
//! RGavdp::CommitSEPConfiguration();
//! MGavdpUser::GAVDP_ConfigurationConfirm()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Configure remote SEP.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method BeginConfiguringRemoteSEP() return KErrNone.
//! 2. Method AddSEPCapability() return KErrNone.
//! 3. Method CommitSEPConfiguration() called without causing panic.
//! 4. The callback function MGavdpUser::GAVDP_ConfigurationConfirm() is called when locally-initiated configuration procedure successfully completes.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0006-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0006-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0006-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0006-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0006-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0006-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0006-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0006-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0006-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0006-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0006-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0006
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0007
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0007
//! @SYMAPI RGavdp::CreateBearerSockets(TSEID);
//! MGavdpUser::GAVDP_BearerReady(RSocket, const TAvdtpSockAddr {ref})
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Create bearers.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Abort stream
//! 18. Wait for call back to MGavdpUser::GAVDP_AbortStreamConfirm()
//! 19. Close bearers
//! 20. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method CreateBearerSockets() return KErrNone.
//! 2. The call back function GAVDP_BearerReady() is called when a bearer has been created for a session in the stream.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0007-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0007-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0007-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0007-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0007-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0007-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0007-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0007-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0007-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0007-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0007-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0007-0001-AbortStream_Command56
OUTSTANDING
DELAY 5000000
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0007
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0008
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0008
//! @SYMAPI RGavdp::StartStream(TSEID);
//! MGavdpUser::GAVDP_StartStreamsConfirm();
//! RGavdp::AbortStream(TSEID);
//! MGavdpUser::GAVDP_AbortStreamConfirm()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Start stream and then abort stream.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Start stream
//! 18. Wait for call back to MGavdpUser::GAVDP_StartStreamsConfirm()
//! 19. Abort stream
//! 20. Wait for call back to MGavdpUser::GAVDP_ MGavdpUser::GAVDP_AbortStreamConfirm()
//! 21. Close bearers
//! 22. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method StartStream() called without causing panic.
//! 2. The call back function GAVDP_StartStreamsConfirm() is called when the locally-initiated Start stream has successfully completed.
//! 3. Method AbortStream() called without causing panic.
//! 4. The call back function GAVDP_AbortStreamConfirm() is called when the locally-initiated Abort stream has successfully completed.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0008-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0008-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0008-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0008-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0008-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0008-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0008-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0008-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0008-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0008-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0008-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND gavdp StartStream BT-GAVDP-PublishedPartner-Active-Master-0008-0001-StartStream_Command56
OUTSTANDING
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0008-0001-AbortStream_Command58
OUTSTANDING
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0008
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0009
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0009
//! @SYMAPI RGavdp::CreateBearerSockets(TSEID, TBool, TBool)
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Send data through created socket.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Start stream
//! 18. Wait for call back to MGavdpUser::GAVDP_StartStreamsConfirm()
//! 19. Send data
//! 20. Wait for call back to RunL()
//! 21. Abort stream
//! 22. Wait for call back to MGavdpUser::GAVDP_ MGavdpUser::GAVDP_AbortStreamConfirm()
//! 23. Close bearers
//! 24. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Send data return KErrNone.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0009-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0009-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0009-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0009-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0009-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0009-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0009-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0009-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0009-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0009-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0009-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND gavdp StartStream BT-GAVDP-PublishedPartner-Active-Master-0009-0001-StartStream_Command56
OUTSTANDING
DELAY 5000000
COMMAND gavdp Send BT-GAVDP-PublishedPartner-Active-Master-0009-0001-Send_Command59
OUTSTANDING
DELAY 5000000
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0009-0001-AbortStream_Command61
OUTSTANDING
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0009
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0010
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0010
//! @SYMAPI RGavdp::SuspendStream(TSEID);
//! MGavdpUser::GAVDP_SuspendStreamsConfirm()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Suspend stream and then restart the stream.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Start stream
//! 18. Wait for call back to MGavdpUser::GAVDP_StartStreamsConfirm()
//! 19. Suspend stream
//! 20. Wait for call back to MGavdpUser::GAVDP_SuspendStreamsConfirm()
//! 21. Start stream
//! 22. Wait for call back to MGavdpUser::GAVDP_StartStreamsConfirm()
//! 23. Abort stream
//! 24. Wait for call back to MGavdpUser::GAVDP_ MGavdpUser::GAVDP_AbortStreamConfirm()
//! 25. Close bearers
//! 26. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method SuspendStream() called without causing panic.
//! 2. The call back function GAVDP_SuspendStreamsConfirm() is called when the locally-initiated Suspend stream has successfully completed.
//! 3. Method StartStream() called without causing panic.
//! 4. The call back function GAVDP_StartStreamsConfirm() is called when the locally-initiated Start stream has successfully completed.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0010-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0010-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0010-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0010-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0010-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0010-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0010-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0010-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0010-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0010-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND gavdp StartStream BT-GAVDP-PublishedPartner-Active-Master-0010-0001-StartStream_Command56
OUTSTANDING
COMMAND gavdp SuspendStream BT-GAVDP-PublishedPartner-Active-Master-0010-0001-SuspendStream_Command58
OUTSTANDING
COMMAND gavdp StartStream BT-GAVDP-PublishedPartner-Active-Master-0010-0001-StartStream_Command60
OUTSTANDING
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0010-0001-AbortStream_Command62
OUTSTANDING
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0010
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0011
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0011
//! @SYMAPI RGavdp::SendSecurityControl(TSEID, const TDesC8 {ref});
//! MGavdpUser::GAVDP_SecurityControlConfirm(const TDesC8 {ref})
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Send security control data to remote SEP and without changed by ACP.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Get all capabilities of a remote SEP.
//! 13. Wait for call back to GAVDP_SEPCapability() and MGavdpUser::GAVDP_SEPCapabilityComplete()
//! 14. Send security control data to remote SEP
//! 15. Wait for call back to MGavdpUser::GAVDP_SecurityControlConfirm()
//! 16. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method SendSecurityControl() called without causing panic.
//! 2. The call back function GAVDP_SecurityControlConfirm() is called when the locally-initiated Security Control message successfully completed.
//! 3. The data returned by the ACP is same to that supplied by INT.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport2
CREATE_OBJECT TAvdtpReportingCapabilities capreport2
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery2
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect2
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0011-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0011-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0011-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0011-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0011-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0011-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0011-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0011-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0011-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0011-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0011-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0011-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND captransport2 new
COMMAND capreport2 new
COMMAND caprecovery2 new
COMMAND caprecovery2 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetRecoveryType_Command37
COMMAND caprecovery2 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetMaxWindowSize_Command38
COMMAND caprecovery2 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetMinWindowSize_Command39
COMMAND capprotect2 new
COMMAND capprotect2 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetContentProtectionType_Command41
COMMAND capprotect2 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SetContentProtectionData_Command42
COMMAND gavdp GetRemoteSEPCapabilities BT-GAVDP-PublishedPartner-Active-Master-0011-0001-GetRemoteSEPCapabilities_Command43
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SEID_Command46
COMMAND gavdp SendSecurityControl BT-GAVDP-PublishedPartner-Active-Master-0011-0001-SendSecurityControl_Command47
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0011
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0012
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0012
//! @SYMAPI RGavdp::SendSecurityControl(TSEID, const TDesC8 {ref});
//! MGavdpUser::GAVDP_SecurityControlConfirm(const TDesC8 {ref})
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Send security control data to remote SEP and changed by ACP.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Get all capabilities of a remote SEP.
//! 13. Wait for call back to GAVDP_SEPCapability() and MGavdpUser::GAVDP_SEPCapabilityComplete()
//! 14. Send security control data to remote SEP
//! 15. Wait for call back to MGavdpUser::GAVDP_SecurityControlConfirm()
//! 16. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method SendSecurityControl() called without causing panic.
//! 2. The call back function GAVDP_SecurityControlConfirm() is called when the locally-initiated Security Control message successfully completed.
//! 3. The data returned is changed by the ACP.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport2
CREATE_OBJECT TAvdtpReportingCapabilities capreport2
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery2
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect2
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0012-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0012-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0012-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0012-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0012-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0012-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0012-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0012-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0012-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0012-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0012-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0012-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND captransport2 new
COMMAND capreport2 new
COMMAND caprecovery2 new
COMMAND caprecovery2 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetRecoveryType_Command37
COMMAND caprecovery2 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetMaxWindowSize_Command38
COMMAND caprecovery2 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetMinWindowSize_Command39
COMMAND capprotect2 new
COMMAND capprotect2 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetContentProtectionType_Command41
COMMAND capprotect2 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SetContentProtectionData_Command42
COMMAND gavdp GetRemoteSEPCapabilities BT-GAVDP-PublishedPartner-Active-Master-0012-0001-GetRemoteSEPCapabilities_Command43
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SEID_Command46
COMMAND gavdp SendSecurityControl BT-GAVDP-PublishedPartner-Active-Master-0012-0001-SendSecurityControl_Command47
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0012
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0013
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0013
//! @SYMAPI MGavdpUser::GAVDP_ReleaseIndication(TSEID)
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Send data and then close bearers and remote device will callback to MGavdpUser::GAVDP_ReleaseIndication().
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Start stream
//! 18. Wait for call back to MGavdpUser::GAVDP_StartStreamsConfirm()
//! 19. Send data
//! 20. Wait for call back to RunL()
//! 21. Close bearers
//! 22. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Close bearers without causing panic.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0013-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0013-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0013-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0013-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0013-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0013-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0013-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0013-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0013-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0013-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0013-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0013-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND gavdp StartStream BT-GAVDP-PublishedPartner-Active-Master-0013-0001-StartStream_Command56
OUTSTANDING
DELAY 5000000
COMMAND gavdp Send BT-GAVDP-PublishedPartner-Active-Master-0013-0001-Send_Command59
OUTSTANDING
DELAY 5000000
COMMAND gavdp CloseBearerSockets
DELAY 5000000
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0013
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0014
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0014
//! @SYMAPI RGavdp::Cancel()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Cancel a command of start stream.
//! @SYMTestActions 1. Create a RGavdp object by default constructor and try to call Cancel().
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Start stream
//! 18. Cancel the start stream command
//! 19. Abort stream
//! 20. Wait for call back to MGavdpUser::GAVDP_AbortStreamConfirm()
//! 21. Close bearers
//! 22. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method Cancel() called without causing panic.
//! 2. The call back function GAVDP_StartStreamsConfirm() will not be called.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Cancel
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0014-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0014-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0014-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0014-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0014-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0014-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0014-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0014-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0014-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0014-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0014-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND gavdp StartStream BT-GAVDP-PublishedPartner-Active-Master-0014-0001-StartStream_Command56
COMMAND gavdp Cancel
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0014-0001-AbortStream_Command58
OUTSTANDING
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0014
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0015
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0015
//! @SYMAPI RGavdp::MaxSecurityControlLength()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Returns the deprecated value KMaxAvdtpSecurityControlInfo.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Get KMaxAvdtpSecurityControlInfo
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Return value of RGavdp::MaxSecurityControlLength() is as expected.
//! @SYMTestType CIT
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
CREATE_OBJECT RGavdp gavdp
COMMAND gavdp new
COMMAND gavdp MaxSecurityControlLength BT-GAVDP-PublishedPartner-Active-Master-0015-0001-MaxSecurityControlLength_Command5
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0015
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0016
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0016
//! @SYMAPI MGavdpUser::GAVDP_Error(TInt, const TDesC8 {ref})
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc GAVDP error occurs.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create bearers
//! 17. Suspend stream
//! 18. Wait for call back to MGavdpUser::GAVDP_Error()
//! 19. Abort stream
//! 20. Wait for call back to MGavdpUser::GAVDP_AbortStreamConfirm()
//! 21. Close bearers
//! 22. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. The call back function GAVDP_Error() is called when a GAVDP error occurs.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0016-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0016-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0016-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0016-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0016-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0016-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0016-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0016-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AddSEPCapability_Command49
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0016-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0016-0001-CreateBearerSockets_Command54
OUTSTANDING
COMMAND !AsyncError=-18 gavdp SuspendStream BT-GAVDP-PublishedPartner-Active-Master-0016-0001-SuspendStream_Command56
OUTSTANDING
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0016-0001-AbortStream_Command58
OUTSTANDING
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0016
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0017
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0017
//! @SYMAPI RGavdp::Connect(const TBTDevAddr {ref})
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Negative test, connect to a not ready remote device.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_Error().
//! 10. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. The call back function MGavdpUser::GAVDP_ConnectConfirm() is called with error number -34 after the method Connect() is called.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0017-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0017-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0017-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0017-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0017-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0017-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0017-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0017-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0017-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0017-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0017-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND !AsyncError=-34 gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0017-0001-Connect_Command29
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0017
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0018
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0018
//! @SYMAPI RGavdp::CommitSEPConfiguration()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Configure remote SEP, and rejected by romte side.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 13.4. TAvdtpContentProtectionCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_Error()
//! 16. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. The callback function MGavdpUser::GAVDP_Error() is called with error number -18178 when locally-initiated configuration rejected by romte side.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0018-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0018-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0018-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0018-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0018-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0018-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0018-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0018-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command45
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetContentProtectionType_Command47
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0018-0001-SetContentProtectionData_Command48
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0018-0001-AddSEPCapability_Command49
COMMAND !AsyncError=-18178 gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0018-0001-CommitSEPConfiguration_Command52
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0018
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0019
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0019
//! @SYMAPI RGavdp::Listen()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Negative test, call listen() again at the remote side after remote SEP has been connected.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Shutdown the GAVDP.
//! 11. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method Connect() return KErrNone.
//! 2. The call back function MGavdpUser::GAVDP_ConnectConfirm() is called when a signalling channel has successfully been created.
//! 3. Method Shutdown()return KErrNone.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0019-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0019-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0019-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0019-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0019-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0019-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0019-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0019-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0019-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0019-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0019-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0019-0001-Connect_Command29
OUTSTANDING
DELAY 5000000
COMMAND gavdp Shutdown
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0019
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0020
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0020
//! @SYMAPI RGavdp::BeginConfiguringRemoteSEP(TSEID, TSEID);
//! RGavdp::AddSEPCapability(const TAvdtpServiceCapability {ref});
//! RGavdp::CommitSEPConfiguration();
//! MGavdpUser::GAVDP_ConfigurationConfirm()
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Reconfiguration of remote SEP.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 13.2. TAvdtpReportingCapabilities
//! 13.3. TAvdtpRecoveryCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Abort stream
//! 17. Wait for call back to MGavdpUser::GAVDP_AbortStreamConfirm()
//! 18. Begin reconfiguration of a remote SEP
//! 19. Add SEP capabilities:
///! 19.1. TAvdtpContentProtectionCapabilities
//! 20. Commit the remote SEP configuration
//! 21. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 22. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method BeginConfiguringRemoteSEP() return KErrNone in both callings.
//! 2. Method AddSEPCapability() return KErrNone in both callings.
//! 3. Method CommitSEPConfiguration() called without causing panic in both callings.
//! 4. The callback function MGavdpUser::GAVDP_ConfigurationConfirm() is called when locally-initiated configuration/reconfiguration procedure successfully completes.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0020-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0020-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0020-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0020-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0020-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0020-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0020-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0020-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command38
COMMAND capreport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command40
COMMAND caprecovery3 new
COMMAND caprecovery3 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetRecoveryType_Command42
COMMAND caprecovery3 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetMaxWindowSize_Command43
COMMAND caprecovery3 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetMinWindowSize_Command44
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command45
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0020-0001-CommitSEPConfiguration_Command46
OUTSTANDING
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AbortStream_Command48
OUTSTANDING
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0020-0001-BeginConfiguringRemoteSEP_Command36
COMMAND capprotect3 new
COMMAND capprotect3 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetContentProtectionType_Command52
COMMAND capprotect3 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0020-0001-SetContentProtectionData_Command53
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0020-0001-AddSEPCapability_Command54
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0020-0001-CommitSEPConfiguration_Command46
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0020
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0021
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0021
//! @SYMAPI RGavdp::CreateBearerSockets(TSEID);
//! MGavdpUser::GAVDP_BearerReady(RSocket, const TAvdtpSockAddr {ref})
//! @SYMAuthor Niandong Qiao
//! @SYMCreationDate 05-06-2008
//! @SYMTestCaseDesc Create transport bearer without reporting and recovery bearers.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Begin configuration of a remote SEP
//! 13. Add SEP capabilities:
//! 13.1. TAvdtpMediaTransportCapabilities
//! 14. Commit the remote SEP configuration
//! 15. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 16. Create transport bearer
//! 17. Wait for call back to MGavdpUser::GAVDP_BearerReady()
//! 18. Abort stream
//! 19. Wait for call back to MGavdpUser::GAVDP_AbortStreamConfirm()
//! 20. Close bearer
//! 21. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method CreateBearerSockets() return KErrNone.
//! 2. The call back function GAVDP_BearerReady() is called when the transport bearer has been created for a session in the stream.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TSEID remoteseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport3
CREATE_OBJECT TAvdtpReportingCapabilities capreport3
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery3
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect3
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0021-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0021-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0021-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0021-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0021-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0021-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0021-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND remoteseid new
COMMAND remotesepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0021-0001-SEID_Command35
COMMAND gavdp BeginConfiguringRemoteSEP BT-GAVDP-PublishedPartner-Active-Master-0021-0001-BeginConfiguringRemoteSEP_Command36
COMMAND captransport3 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AddSEPCapability_Command38
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0021-0001-CommitSEPConfiguration_Command39
OUTSTANDING
COMMAND gavdp CreateBearerSockets BT-GAVDP-PublishedPartner-Active-Master-0021-0001-CreateBearerSockets_Command41
OUTSTANDING
COMMAND gavdp AbortStream BT-GAVDP-PublishedPartner-Active-Master-0021-0001-AbortStream_Command43
OUTSTANDING
DELAY 5000000
COMMAND gavdp CloseBearerSockets
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0021
START_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0022
//! @SYMTestCaseID BT-GAVDP-PublishedPartner-Active-Master-0022
//! @SYMAPI RGavdp:: GetRemoteSEPCapabilities(TSEID, const TAvdtpServiceCategories {ref});
//! MGavdpUser::GAVDP_Error()
//! @SYMAuthor Felix Rao
//! @SYMCreationDate 08-07-2008
//! @SYMTestCaseDesc Negative test, get capabilities which remote device does not support.
//! @SYMTestActions 1. Create a RGavdp object by default constructor.
//! 2. Open a GAVDP session.
//! 3. Register SEP (source & audio)
//! 4. Begin configuration of this SEP
//! 5. Add local SEP capabilities:
//! 5.1. TAvdtpMediaTransportCapabilities
//! 5.2. TAvdtpReportingCapabilities
//! 5.3. TAvdtpRecoveryCapabilities
//! 5.4. TAvdtpContentProtectionCapabilities
//! 5.5. TNonSBCCodecCapabilities
//! 6. Commit the local SEP configuration
//! 7. Wait for call back to MGavdpUser::GAVDP_ConfigurationConfirm()
//! 8. Connect to a remote device.
//! 9. Wait for call back to MGavdpUser::GAVDP_ConnectConfirm().
//! 10. Discover SEPs of remote device.
//! 11. Wait for call back to MGavdpUser::GAVDP_SEPDiscovered() and MGavdpUser::GAVDP_SEPDiscoveryComplete().
//! 12. Get NonSBCCodecCapabilities which remote device does not support.
//! 13. Wait for call back to MGavdpUser::Gavdp_Error() to indicate not supported capabilities.
//! 14. Closes the GAVDP session.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults 1. Method MGavdpUser::GetRemoteSEPCapabilities() return KErrNone.
//! 2. The call back function MGavdpUser::Gavdp_Error() is called with error number -5.
//! @SYMTestType CIT
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StartSyncTestCase
START_TEST_BLOCK 100 t_btgavdpapi \bluetooth\gavdp\bt-gavdp-publishedpartner-active-master.ini
SHARED_ACTIVE_SCHEDULER
RESTORE_OBJECT TBTDevAddr addrremote
CREATE_OBJECT RSocketServ socketserv
CREATE_OBJECT RGavdp gavdp
CREATE_OBJECT TAvdtpSEPInfo localsepinfo1
CREATE_OBJECT TSEID localseid
CREATE_OBJECT TAvdtpMediaTransportCapabilities captransport1
CREATE_OBJECT TAvdtpReportingCapabilities capreport1
CREATE_OBJECT TAvdtpRecoveryCapabilities caprecovery1
CREATE_OBJECT TAvdtpContentProtectionCapabilities capprotect1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc1
CREATE_OBJECT TAvdtpSEPInfo remotesepinfo1
CREATE_OBJECT TNonSBCCodecCapabilities capnonsbc2
COMMAND socketserv RSocketServ
COMMAND socketserv Connect
COMMAND gavdp new
COMMAND gavdp Open BT-GAVDP-PublishedPartner-Active-Master-0022-0001-Open_Command04
COMMAND localsepinfo1 new
COMMAND localsepinfo1 SetIsSink BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetIsSink_Command06
COMMAND localsepinfo1 SetMediaType BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetMediaType_Command07
COMMAND gavdp RegisterSEP BT-GAVDP-PublishedPartner-Active-Master-0022-0001-RegisterSEP_Command08
COMMAND localseid new
COMMAND localsepinfo1 SEID BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SEID_Command10
COMMAND gavdp BeginConfiguringLocalSEP BT-GAVDP-PublishedPartner-Active-Master-0022-0001-BeginConfiguringLocalSEP_Command11
COMMAND captransport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0022-0001-AddSEPCapability_Command13
COMMAND capreport1 new
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0022-0001-AddSEPCapability_Command15
COMMAND caprecovery1 new
COMMAND caprecovery1 SetRecoveryType BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetRecoveryType_Command17
COMMAND caprecovery1 SetMaxWindowSize BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetMaxWindowSize_Command18
COMMAND caprecovery1 SetMinWindowSize BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetMinWindowSize_Command19
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0022-0001-AddSEPCapability_Command20
COMMAND capprotect1 new
COMMAND capprotect1 SetContentProtectionType BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetContentProtectionType_Command22
COMMAND capprotect1 SetContentProtectionData BT-GAVDP-PublishedPartner-Active-Master-0022-0001-SetContentProtectionData_Command23
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0022-0001-AddSEPCapability_Command24
COMMAND capnonsbc1 new BT-GAVDP-PublishedPartner-Active-Master-0022-0001-new_Command25
COMMAND gavdp AddSEPCapability BT-GAVDP-PublishedPartner-Active-Master-0022-0001-AddSEPCapability_Command26
COMMAND gavdp CommitSEPConfiguration BT-GAVDP-PublishedPartner-Active-Master-0022-0001-CommitSEPConfiguration_Command27
OUTSTANDING
DELAY 5000000
COMMAND gavdp Connect BT-GAVDP-PublishedPartner-Active-Master-0022-0001-Connect_Command29
OUTSTANDING
COMMAND remotesepinfo1 new
COMMAND gavdp DiscoverRemoteSEPs BT-GAVDP-PublishedPartner-Active-Master-0022-0001-DiscoverRemoteSEPs_Command32
OUTSTANDING
COMMAND capnonsbc2 new BT-GAVDP-PublishedPartner-Active-Master-0022-0001-new_Command34
COMMAND !AsyncError=-5 gavdp GetRemoteSEPCapabilities BT-GAVDP-PublishedPartner-Active-Master-0022-0001-GetRemoteSEPCapabilities_Command35
OUTSTANDING
COMMAND gavdp Close
COMMAND socketserv Close
STORE addrremote
STORE_ACTIVE_SCHEDULER
END_TEST_BLOCK
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveSyncTestCaseResult
END_TESTCASE BT-GAVDP-PublishedPartner-Active-Master-0022
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini RetrieveExecutionResultSamplesDatabasePassiveSlave
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StopTDService
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\gavdp\ucc-control-channel-config.ini StopSyncService